I use win4k3 as my rig control. I use the macros window to control other
things. It also has the ability work with AC LOG which is my favorite logging
software. It also works with other digital software.
I use the small rig control window. The only thing I wish it had was adjustable
window
de threw the wires. hihi
Thank you
Gerald Manthey
-
KC6CNN - Gerald
K3 # 6294
KX3 # 757
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: ht
Hello
I am Gerald Manthey and I was trying to set my Freq Calibration because
everyone kept telling me I was off freq.
I tried as I read on the forums with 5000, 1, 15000 with regular and
alt on CW.
But I think I did something wrong. lol
I went to put it back to factory and 1. Where I wrote
I had RF problems with my P3 Keyboard also. I also used snap on mix 31’s and
solved the problem. Then decided to use a wireless keyboard and that solved the
problem. I felt the rf was getting in by the order as it was a cheap keyboard
and the cord was very thin.
Hope this helps you with some
Think I will post my K1 4 band and my two extra 2 Bandera for sale.
Gerald.
On Aug 30, 2017 3:39 PM, "Al Scanandoah" wrote:
I sat on the fence for too long, and didn't acquire my K1 until earlier
this year. I missed out on the 4 band module, but I at least came up with a
Don
I couldn't agree with you more I am guilty of this too. What books could you
recommend I start with?
Thanks
Gerald KC6CNN
> On Apr 30, 2017, at 10:20 PM, Don Wilhelm wrote:
>
> One important thing I forget to mention is that you should learn how to
> construct
Super quiet fans! Full duty cycle.
> On Mar 17, 2017, at 12:06 PM, Eric Swartz - WA6HHQ, Elecraft
> wrote:
>
> Interesting discussion.
>
> Folks, if we did introduce a 1500 W solid state amp similar to our KPA500 in
> operation, what features etc would be important?
>
>
If it were only a chip change to add a winkeyer 3 inside my K3 I would do it in
a heart beat.
> On Feb 16, 2017, at 6:51 PM, Kevin wrote:
>
> Using the Winkey is not a requirement. It's just a much better keyer than the
> Elecraft keyer.
> One chip and some extraneous
I second that, so much software support winkeyer.
Gerald
> On Feb 15, 2017, at 11:57 AM, Jim Larson wrote:
>
> It sure would be awesome if a user could put the internal K3s keyer into a
> Winkeyer emulation mode. The majority of logging software supports K1EL's
> command
I sure wish it would display text like the PX3 does.
> On Nov 7, 2016, at 10:41 AM, n6hz wrote:
>
> Hi Andy,
>
> I know it can get confusing with all the different macros. The K3 can be
> programmed with macros, the P3/SVGA can have keyboard macros saved using a
>
Mine does this too, but only when displaying decoded text. I have to adjust it
every time.
> On Oct 18, 2016, at 11:01 AM, Irwin Darack wrote:
>
> Latest firmware installed
>
> Thanks, Irwin KD3TB
>
>> On Monday, October 17, 2016, Guy Olinger K2AV
I'll start it.
First thing you want to do is
Hide the invoice with total amount spent from your spouse. LOL
Congrats
Gerald KC6CNN
> On Jul 21, 2016, at 8:38 AM, MaverickNH wrote:
>
> A new K3S (2.8/2.1/1.0/400/250) and P3 with SVGA/TXMON arriving early next
> week
Jerry
Spot on. Thank you for your advice to this new ham.
73 Gerald KC6CNN
> On Jul 19, 2016, at 1:46 PM, Jerry Moore wrote:
>
> I will throw my view into the mix.
>
> As a new Ham operator you have no idea what you want to do in the hobby
> other than EVERYTHING!!!
monitor which did not meet my requirement.
> An extra monitor in the motor home simply will not fit.
> Admittedly cost became a factor as well given the add on hardware as well as
> the monitor and it all got to difficult.
> However, I love my K-line and don't plan on replacing it in this l
Hello Don
Yeah I have that but was hoping it would work on just the P3 like the PX3 does
do I did not have to set up a monitor.
> On Jul 16, 2016, at 7:37 PM, Don Wilhelm wrote:
>
> Gerald,
>
> Add the P3SVGA option and you can see the text on the SVGA monitor.
>
>
What does that do?
> On Jun 21, 2016, at 12:17 PM, Richard Newstead
> wrote:
>
> Nicolas F4EGX has done a nice blog entry showing how he has installed
> our LASERBEAM digital filter module in his K2.
>
>
Yeah that would work, I have android tab. I price a windoze one. We are going
on dx again to Bagdad beach again then going to green island and looking for
the light weight stuff. I am hoping to get my KX2 before the island trip. We
are running a K1, K2, KX3, K3 and hope the KX2.
Going to be
Thank you Fred
Sure would be nice if it would decode on the P3 screen.
> On Apr 21, 2016, at 11:33 AM, Cady, Fred wrote:
>
> Hi Mike,
> You have to have the SVGA option in the P3 to be able to display decoded text.
> 73,
> Fred KE7X
>
> For all KE7X Elecraft books, see
Watching replies. Would be nice to have in P3 alone. Especially 2 lines.
73 Gerald
> On Apr 21, 2016, at 11:33 AM, Cady, Fred wrote:
>
> Hi Mike,
> You have to have the SVGA option in the P3 to be able to display decoded text.
> 73,
> Fred KE7X
>
> For all KE7X Elecraft
They K2 might be old school, but you got to love the sound they have with CW.
It is so easy on my ears.
I almost sold my K1 4 band with 2 extra band boards to get another one.
73's Gerald KC6CNN.
> On Mar 21, 2016, at 12:22 PM, Don Wilhelm wrote:
>
> Sam,
>
> It is
Bruce
Depends on time to trouble shoot and others ahead. But I can tell you from
experience, they fix them like they were brand new again. I sent mine in and
wow. I had had it back in a reasonable amount to time and having been burned in
again and it came back like new and not a issue.
Great
Why is 10' to 15' of coax what you would want if using a tuner in the shack? I
know about loses in really long runs, but why 10 to 15 feet?
Thanks asking to learn not criticizing.
Gerald
> On Feb 17, 2016, at 3:31 PM, Jim Rodenkirch wrote:
>
> Gary - depends on your
I would buy one right now.
500 is great for convenience but full legal limit would be my ultimate goal.
Some time a little extra is all you need lol and I run QRP most the time.
> On Jan 31, 2016, at 11:10 PM, Greg Miller wrote:
>
> …a KPA1500 is something I would buy in
Yes
That fixed it. I tried Win4K3 and utility once P3 off they both worked better,
much better.
Thanks
Gerald.
> On Jan 8, 2016, at 6:21 PM, Tom wrote:
>
> work.
> So if you use the utility, make sure the SVGA display for decoding is off or
> Win4K3's terminal is
Craig
Do you have the real estate to have dipoles up or are you limited in space?
Tnx
Gerald KC6CNN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Congratulations Byron.
You picked a super radio to be the first new on.
Your going to be happy and learn a bunch. I still find stuff my elecraft
radios do that I had no ideal they did.
Congratulations again and hope to work you.
73's
Gerald - KC6CNN
On Jul 31, 2015 3:03 PM, Byron Peebles
I could not use the latest beta either. I had to go one beta back.
Gerald KC6CNN
On Feb 2, 2015 7:46 PM, Jim Miller j...@jtmiller.com wrote:
Decided to try the latest beta P3 firmware. All loaded including FPGA.
SVGA output is frozen and P3 is updating very slowly.
When I turn the SVGA
I just wrote a macro and it does it for me. Thanks.
73 all
Gerald
On Dec 25, 2014 5:55 PM, k5oai k5oai@gmail.com wrote:
even though you have CW in SSB set.
When you are in SSB, the memories record from the mic,
I guess you could record audio of your call sent in cw over the mic and do
it
Right mouse click on it.
Gerald
On Nov 12, 2014 8:56 AM, Paul VanOveren pauln...@gmail.com wrote:
Just getting back into psk and everything working ok, except cannot
remember settings to populate the Add Log Entry window with the call signs
that appear in the receive window. I want to be
Hi Mike
Is it a Samsung monitor?
And did you put beads on the power line in too?
Gerald
On Nov 5, 2014 11:33 AM, mike ai...@comcast.net wrote:
When using KPA500 my external monitor (and the P3 display) often freezes,
sometimes up to 5 seconds, after I transmit. With the external display
Mike is the monitor 12 volts from the AC supply. If so try running with DC
and beads.
Gerald
On Nov 5, 2014 1:14 PM, mike ai...@comcast.net wrote:
Not a Samsung, it is a BenQ. But it happened with Dell and ASUS monitors as
well. I just put four beads on the power line as suggested and it seems
Also check monitor refresh rate probably set at 60hz if changeable change
it off 60. The check all menu items on P3 dealing with the SVGA settings.
Gerald
On Nov 5, 2014 1:18 PM, Gerald Manthey kc6...@gmail.com wrote:
Mike is the monitor 12 volts from the AC supply. If so try running with DC
Yes i know. Everyone told me. I had mine in moving box somewhere. My
computer for Internet was also boxed somewhere. All I had was my phone and
was looking for help. I know they are in the manuals. To the ones that sent
just the diagrams thank you all is up and running now. To the others I hope
Hello Doug
I agree with you. I use Win4k3 as my rig control and HRD log and DM780. It
is stable and works great. It is nice to have my complete K-Line monitored
and controlled by Win4K3.
Tom has done a super job on this software. The Terminal part of it is also
easy to use and a nice feature.
73
for about two minutes and then crashes.. I would LOVE to get it
going but have been unable to..
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Gerald
Manthey
Sent: Friday, October 24, 2014 10:14 AM
To: Doug Ellmore
Cc: elecraft
master.
It runs for about two minutes and then crashes.. I would LOVE to get it
going but have been unable to..
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Gerald
Manthey
Sent: Friday, October 24, 2014 10:14 AM
To: Doug Ellmore
Tom
Do I have to have usb's hooked up to all the equipment to get it to show in
the software?
Thanks
Gerald
On Sep 13, 2014 11:09 AM, tom...@videotron.ca wrote:
Win4K3Suite - version 1.662 is now released. This version has a number of
enhancements which follow from user feedback.
New:
- It
Appreciate the heads up Edward. I enjoy checking your site.
Looking forward to it being back up.
73's Gerald - KC6CNN
On Aug 27, 2014 5:54 PM, Edward R Cole kl...@acsalaska.net wrote:
Thanks for the helpful suggestions and several that initially alerted me.
The host is ace.net and they have
I use Tom ' s software. It is stable and controls the elecraft line like no
other. There are a few issues that he has told us about and did say
elecraft was notified and later I recheck and he did not hear back from
them.
This software should be on the elecraft site. It controls the K-Line as
well
John
What size of a generator are you going to use? Also what kind of loads are
you going to be running?
I have experience with all different types, styles, and sizes of generators
because of off grid living. Although mine are now used to only charge the
battery bank in multiple days of bad
Just how many people are running high power on low power modes like jt65?
I work the world with 10 watts.
Gerald - KC6CNN
On Jul 19, 2014 10:48 AM, Phil Wheeler w...@socal.rr.com wrote:
Hmm .. makes me wonder if a failed fan would result in an error message
and/or graceful power roll off to
Yes I guess I was not totally informed. I took the suggestions from the
book and translated it to mean low power.
I read the user guide for jt65hf and it said in part Running at full
output power is
seldom necessary or desirable due
to the incredible sensitivity of JT65.
Most users find 5 to 10
Bill can you give us a little more derails? Such as comouter, software,
soundcard, etc.
Thanks
Gerald - KC6CNN
On Jul 16, 2014 10:58 AM, Bill Davis via Elecraft
elecraft@mailman.qth.net wrote:
Since we are talking about the data modes. W1AW/4 was on 15m PSK31 this
morning. Nice signal here
Tony
I have the same setup.
I have not tried Olivia. I have worked all other modes.
What mode is radio set too? Data mode? Is the decode button highlighted
above the waterfall in DM780?
Is band with set properly as not to cut off the signal edges both on the K3
and DM780?
Once your on the signal
Tony
You said you used fldigi or some other software before.
Did you run Olvida? If so then hardware fine its a HRD setting.
Confirm that and I will go check mine in that mode while waiting.
Gerald
__
Elecraft mailing list
Home:
Yeah Don
That is what I was just thinking.
This group is a bunch of middle aged business owners who were feed with a
silver spoon. I brought up used equipment and was told they buy only the
best.
Then we all walked out to the parking lot and my Toyota truck was
surrounded by $50,000 trucks. Hihi.
Easy to find your way around in the dark. Thanks for sharing that.
73's Gerald - KC6CNN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Thank you Bruce.
I have been there went hams sending at 20 + would not slow down and or work
the new novice. I now try to work there a lot to help encourage then.
I wish more would do that too.
73's KC6CNN Gerald
__
Elecraft mailing list
If elecraft made a full legal power amp like the Kpa500. I would be all
over it. Right now I use a Alpha 76PA. When I have to, only voice. Every
thing else is around 10 to 25 watts.
Gerald
On May 12, 2014 2:27 PM, Scott Manthe scott.man...@gmail.com wrote:
$6-$7K is a boatload of money, but I
Damn! I guessed it. I was the first poster and guessed right. Wish I won
the first one built, but still happy I guessed it.
Wish I was as lucky at lottery.
Gerald - KC6CNN
__
Elecraft mailing list
Home:
? External
PX3? , waterfall display?
Keyboard?
Just my guesses.
Looking forward to see it.
Gerald - KC6CNN
On Apr 3, 2014 12:50 PM, Wayne Burdick n...@elecraft.com wrote:
Hi all,
We'll be showing a major new product -- a KX3 external accessory -- at the
Visalia DX Convention. You can
Congratulations and welcome aboard. There will be many first to come. 1st
QSO , 1st DX many of us have been doing this for years, and still get
excited over different things.
You have chosen a great hobby. And when all else fails you will be
communicating.
Congratulations again Sean
73's KC6CNN
That was suggested Chester.
It works too. You can kick around numbers and theory all day. Real world is
the best way and you have to remember, temp plays a major part too.
I have lived off grid for two years. My experience has been through trial
and error.
Mind you I don't run just ham equipment,
I run 25 watts on my K3. I adjusted it by watching my peaks on a scope. At
25 watts and my alc set I have a clean signal. There are those that splat
more power and we all see them in the waterfall. 25 watts will work the
world on PSK.
Just my observations and my .02 cents.
73 Gerald
On Feb 22,
I agree with Don! I like to chat, learn about the op or Qth. It is a major
draw back to Jt 65 or Jt9.
On Feb 22, 2014 4:26 PM, Don Wilhelm w3...@embarqmail.com wrote:
Doug,
While low power may have been the recommendation, I started in PSK31 in
2000 when I had only a K2/10. I ran it in the
I use a Signalink with my K2 and it works good. I also have the fixed audio
going to the Signalink. Get you volume controls set in windows and adjust
the ALC until only one bar lights. Make sure to stay with in the power
limit of the rig. For K2 / 10 I use 4 to 5 watts. For the K2/100 I don't
Thank you Wayne.
It was nice to see a tiny little fraction of what you have to deal with.
And also keeps us up to date too.
Keep up the great work.
Gerald - KC6CNN
On Jan 13, 2014 6:41 PM, Wayne Burdick n...@elecraft.com wrote:
Sorry for the bandwidth, guys. Slip of the email alias :)
Now
Thank everyone for you suggestions. Here is what I found and did to fix it.
I disassembled my station and then started connecting one thing at a time
until I found the problem.
It turned out that my Signalink USB sound card was what was picking up the
feed back and introducing it back into the K3.
Thank you for sharing your findings .
I find on my K2/10 5 watts is good. On K2/100 and K3 25 watts is good. My
KX3 is good at 4 watts , I think it is lower because max power is 10 watts.
73's Gerald
On Sep 19, 2013 1:36 PM, Gerry McGowan m0...@yahoo.com wrote:
Hi,
after carrying out on air
Don
Changing those two caps changes the audio or band width of the signal?
Thanks
Gerald.
On Aug 12, 2013 6:41 PM, Don Wilhelm w3...@embarqmail.com wrote:
Ed,
Change 2 capacitors on the KSB2 board. C34 to 0.47 uF and C32 to
something in the 3300 pF to 5000 pF range.
I usually run SSBC at
The reason I ask is that I get reports of very narrow audio when monitored
by someone with a band scope. They saw between 2 and 2.5 , where most
everyone else runs 3 to 3.5
Thanks
Gerald
On Aug 12, 2013 6:41 PM, Don Wilhelm w3...@embarqmail.com wrote:
Ed,
Change 2 capacitors on the KSB2
I use the Signalink USB ,some use their computer sound card while others
use rig blasters and other sound cards. Just remember to get the volume
settings adjusted right and don't over power. I work the world on 25 watts.
Good luck hope to see you on the waterfall.
Gerald - KC6CNN
On Jul 26, 2013
Is The vox on?
On Jul 8, 2013 4:15 PM, Mike K2MK k...@comcast.net wrote:
Hi Mike,
If you hear the tones in the K3 speaker then I assume you mean that you are
hearing them through the monitor. This tells me that the tones are getting
through to the K3 and that you are in transmit (red light).
Airmail is one software and RMS express is made by the Winlink group. I use
RMS express with my K3 and my K2 and KX3. It works fine business on Winmor.
Hope that helps.
Thanks
Gerald - KC6CNN
On Jul 5, 2013 9:12 PM, K7JLTextra k7jltex...@gmail.com wrote:
I use RMS express with my K3 KX3, it's
I agree with you Gary. Here in Texas we add BBQ also.
Who needs an excuse to get out and operate. Have motorhome will travel.
On Jun 23, 2013 8:17 PM, Gary Gregory vk1zzg...@gmail.com wrote:
Gee, you guys almost got it figured out.
Motorhome, beer, k-line, beer, antennas, beer, solar power,
Are you using an external sound card?
On Jun 11, 2013 7:58 AM, W5JAN w5...@earthlink.net wrote:
To All,
I cannot get HRD (Ham Radio Deluxe) to send CW thru the KX3, but I can send
CW from my keyboard
using the Elecraft Utility. I have gone thru the HRD settings many times
and I have
I second the powerworxs
On Jun 11, 2013 8:28 PM, Anthony Scandurra K4QE k...@att.net wrote:
powerwerx.com model SS-30DV. Quiet, no RF hash, small, and light. I
have had it for just over a year now, and it has been on one DXpedition.
73, Tony K4QE
From:
Congratulations Bill
You will be pleased with the KX3. Get a good antenna for you situation and
you will find QRP is fun. Then order the amp and tuner later and you will
have a awesome 100 watt radio.
73's Gerald KC6CNN
On Jun 2, 2013 3:30 PM, Bill Blomgren billb...@nc.rr.com wrote:
I ordered a
You will be very happy with the new radio.
Good luck
73 Gerald KC6CNN
On May 29, 2013 4:34 PM, Richard W Hemingway rhemi...@sbcglobal.net
wrote:
That didn't take long, about one day. I have ordered a K3 factory built
and will get it in a bit.
You have all convinced me it is the thing to do.
I have all those and can confirm the Signalink does not use key out.
Gerald
On May 25, 2013 5:28 PM, K5HM k5hm@gmail.com wrote:
The Signalink USB and the keying line for the linear amp both use the Key
Out port on the K3. Is there a solution that would not require unplugging
the Signalink
on the K3?
73,
Fred/N0AZZ
K3 Ser #'s 6730/5299--KX3 # 2573--K2/100--KAT100
P3/SVGA--KPA500--KAT500--W2
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gerald Manthey
Sent: Tuesday, May 21, 2013 9:43 PM
To: Dick
and, therefore,
no
power out of the Alpha.
This happens on my K3/Al-80B combo.
73...Rick -- W5RH
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gerald Manthey
Sent: Wednesday, May 22, 2013 9:19 AM
To: Fred Smith
Cc: elecraft
Yes, from key out to relay on the amp.
On May 21, 2013 9:06 PM, Dick Dievendorff die...@comcast.net wrote:
Have you connected the amplifier keying line?
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Both rca connectors.
On May 21, 2013 9:42 PM, Gerald Manthey kc6...@gmail.com wrote:
Yes, from key out to relay on the amp.
On May 21, 2013 9:06 PM, Dick Dievendorff die...@comcast.net wrote:
Have you connected the amplifier keying line?
Dick, K6KR
-Original Message-
From
...@mailman.qth.net] On Behalf Of Fred Jensen
Sent: Wednesday, May 01, 2013 7:49 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 power source
On 5/1/2013 7:38 PM, Gerald Manthey wrote:
Can the KPA500 handle more than 1000 watts? Say like 1100 to 1500?
You must mean KAT500, and I don't think
Hello Eric
So the web page saying 1200 to 1500 would not be correct? I would only run
the amp at 1000 anyway, but just making sure before I buy one.
Thanks
Gerald.
On May 2, 2013 2:28 PM, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com
wrote:
Its important to understand that KAT500 operation
Can the KPA500 handle more than 1000 watts? Say like 1100 to 1500?
On May 1, 2013 9:36 PM, Dick Dievendorff die...@comcast.net wrote:
It's not that critical. Just 11 to 14 volts or so at an ampere max. The
positive is the center of the coaxial DC power connector.
73 de Dick, K6KR
On May 1,
Yea, I meant KAT500. Ok I saw it would do 1000 at 3-1 but was curious about
1500.
Thanks
On May 1, 2013 9:48 PM, Fred Jensen k6...@foothill.net wrote:
On 5/1/2013 7:38 PM, Gerald Manthey wrote:
Can the KPA500 handle more than 1000 watts? Say like 1100 to 1500?
You must mean KAT500, and I
Thank you all. I think I will make a call to elecraft tomorrow. But Mr.
Brown is running legal limit fine. Ok just wanted to ask.
Thanks All
Gerald
On May 2, 2013 12:29 AM, Jim Brown j...@audiosystemsgroup.com wrote:
On 5/1/2013 7:38 PM, Gerald Manthey wrote:
Can the KPA500 handle more than
The key here is a good charge controller. I use a mppt controller and it is
98 % efficient. Gets 30% for charge. Has 3 different charge rates and
handles all battery types.
My RV is also wind turbine and solar powered. I have 560 watt solar to my
mppt charger, then to my 900 amp hr battery bank.
Chris, what mode are you trying and what do you have your power set to?
Also if your RX and TX on the Signalink are maxed, use the Signalink
internal jumper to boast the gain so you can turn them down. Also check the
computer volume both sound and microphone recording. And make sure the
computer
Good. If 9 o'clock and all is good then use Don's suggestion and set alc
and you should be fine.
Good luck.
On Apr 14, 2013 1:40 PM, Chris Kimball m...@cvkimball.com wrote:
Thanks for the comments.
I'm using Olivia/Contestia most of the time rather than MPSK. The possible
splatter is with
Chris.
I have my TX and RX set at 9 o'clock each rig is different I set to low
power and get my signal looking good and then increase my power on the K2
to my 25 watts desired power. On my radio anything over 25 in digital mode
causes distortion. Works fine on CW and SSB. But other digital modes
My k2, k3 and kx3 do great on digital. I run 5 watt most the time. I have
run 25 watts before. But 5 watts have made many contacts in cw and psk31.
Good luck
Gerald.
On Feb 28, 2013 6:43 PM, Stan AE7UT ae7...@gmail.com wrote:
I have both a K3 and KX3 and was thinking it would be nice to use my
Thank you Paul.
I appreciated hearing it first hand. I am glad he and his family are all
okay. Hoping for the best for all those that experienced it.
Thanks
Gerald- KC6CNN
On Feb 18, 2013 11:26 AM, Richard Fjeld rpfj...@embarqmail.com wrote:
Wow, I remember the call UK9AAN well as I have his
I would prefer the ZS6BKW , it is a improved G5RV. Google it and I think
you will be impressed compared to the G5RV 102.
Just my option.
Gerald- KC6CNN
On Feb 13, 2013 4:14 PM, Paul and Sue Huff ph...@mi.rr.com wrote:
Here in the dead of winter I am thinking about spring antenna projects.
One
Jim, were you able to get it working?
On Dec 5, 2012 9:34 AM, Stan Gibbs s...@ajaxsoftware.com wrote:
Did you cycle power after enabling the ATU?
-
73, Stan - KR7C
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Help-tp7566701p7566713.html
Sent from the
Hello Tom
I run the K2 and psk31. It's fun, just remember set your power low. 5 watts
on k2/10 . As far as the mic, I am not sure.
Good luck hope to see you on the waterfall.
KC6CNN
On Nov 27, 2012 5:30 PM, Tom McCulloch th...@att.net wrote:
Hi gang,
I have a very old Rig Blaster interface
Rick
Is there a date for V6 yet?
Can't wait. Hihi
On Nov 26, 2012 10:25 PM, Rick Bates happymooseph...@gmail.com wrote:
So what you're saying is that the N1MM software is the common thread with
the multiple QTH and computer combos?
I presume that it is up to date, along with any OS updates,
Al is the K1 still for sale?
On Nov 21, 2012 5:45 PM, VE3GAM ve3...@rogers.com wrote:
KX1, 40, 30 and 20 m covered, no tuner, no paddle
$250 + shipping (shoukd be about $15)
Paypal preferred, email if interested
al ve3gam
__**__**__
Its on the kx3 order page.
On Nov 20, 2012 5:15 PM, David Christ radio...@mchsi.com wrote:
What am I missing? This is not the first time an XG50 has been mentioned.
However I can find no sign of it on the Elecraft web site.
David K0LUM
On Nov 19, 2012, at 8:13 PM, Wayne Burdick wrote:
Hello Jay.
Before I got a vertical dipole, I used a 20 meter bazooka up 16 feet. I
worked all kinds of stations and a bunch of DX. I did this running 5 watts
and up to 25 watts. I have a K2, K3, and a KX3. They are great radios. It
goes without saying a better antenna is going to perform well,
Hello Don
There are four settings under the cw mode in Hrd. Cw, and winkey do not
work with the K3 alone. The ky and mcw work good with the K3. Mcw is used
with vox and the tones key the radio. Only down fall is you have to use the
stop in macros or click the stop button. The kycw is for elecraft.
Yes, vox on mcw. Not needed on cwky.
On Nov 11, 2012 4:43 PM, Ian Kahn - Ham km4ik@gmail.com wrote:
Don,
The K3 requires VOX be active to send CW. Please check the K3 user's
manual under CW operations.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3
Congradulations Nick
What kind of antenna did you use?
On Nov 7, 2012 6:29 PM, Nick-WA5BDU nick-wa5...@suddenlink.net wrote:
Also had a great time giving my KX3 its first taste of a real contest
in the CW SS. I made 388 Qs operating about 20 hours or so. Missed the
clean sweep by one
Hello Rich
Be careful and good luck, been through many of those.
Keep us posted, or set up your radio after it passes. I will monitor the
freq's used for tge elecraft nets.
Good luck and be safe.
On Oct 29, 2012 8:48 AM, rck...@comcast.net wrote:
Greetings,
I'm n New Jersey riding out the
Chip
Any problems running RTTY at full power? PA heat? Or are you running it
half power at 5 watts?
Thanks
KC6CNN- Gerald
On Oct 20, 2012 10:23 AM, Chip Stratton c...@strattonfamily.us wrote:
I'm very impressed with the RTTY mode in this little bugger. It is doing a
good job of decoding
I am so looking forward to getting my fist speed up so that I can send psk
and Rtty with thr key.
On Oct 20, 2012 11:24 AM, Andrew Moore andrew.n...@gmail.com wrote:
I've never been into any mode other than CW, but this morning I tried
RTTY and PSK31 on the KX3 for the first time.
I too was
Chris
I run the signalink with my K2. Works great. Psk31 and cw. I am going to
try rtty when radio comes back. Getting kpa100 and kat100 in ec2 case. I
use my hp mini, signalink and K2 off of wind turbine and solar on my
ranch. I really like the SL USB and K2 combo.
On Oct 14, 2012 8:33 PM,
I'll take it.
On Oct 4, 2012 3:07 PM, Ariel Jacala n...@hotmail.com wrote:
I have a K2 battery holder that is surplus to my needs. If anyone needs
it I can ship to any one CONUS for the price of postage, nothing else.
Please reply off list.
First come, first served.
Ariel
Sent from my
1 - 100 of 129 matches
Mail list logo