Dan's signature below is that of a musician. Always your phone number after
your name. Someone may need a bassist.
Back in my "professional" music days, someone would ask one of my band
members... "how many in your band?". Their response"four musicians and a
drummer". Need I add which on
Several years ago I purchased shipping boxes for Collins S-Line radios from a
source I believe was called "Ham Radio Boxes" . I don't know if they are still
around or not, but the boxes were exactly what I needed.
Terry W0FM
-Original Message-
From: w...@jetbroadband.com [mailto:w...@
Hey Victor. I have sent you pics of a couple of the Tuna Can kits I've
constructed. They were built as pure recreation. But they work! Not a K3S
but fun QRP rigs.
Terry, W0FM
-Original Message-
From: Victor Rosenthal 4X6GP [mailto:k2vco@gmail.com]
Sent: Friday, August 21, 202
In addition to Dave's many talents, he is also a fine drummer. "Steady
feet" are a requirement and a result of years of hard work.
Terry, WØFM
-Original Message-
From: Bill Johnson [mailto:k9...@live.com]
Sent: Thursday, May 23, 2019 7:02 PM
To: Dave Van Wallaghen; donw...@embarqmail.c
I never met the man, but have felt like I've known Fred for many years. May
he rest in peace.
Terry, W0FM
-Original Message-
From: hawley, charles j jr [mailto:c-haw...@illinois.edu]
Sent: Friday, May 17, 2019 4:20 PM
To: Todd Gahagan; Elecraft Elecraft List
Subject: Re: [Elecraft] KE7
Will I be able to initially load my K3S saved configurations into a new K4?
Will there be any disconnect there?
Terry, WØFM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
Or, perhaps."Hey ELMER" ;o)
Terry, WØFM
-Original Message-
From: Walter Underwood [mailto:wun...@wunderwood.org]
Sent: Monday, March 25, 2019 12:38 PM
To: Elecraft mail list
Subject: Re: [Elecraft] K4?
> On Mar 25, 2019, at 11:57 AM, Bert wrote:
>
> Voice interface is OK with
I use commercial spam solutions for relief from internet email spammers. Lots
of them out there. That's all well and good. The REAL problem for me are robo
calls to my home phones and cell phone. I listed both phones on the State of
Missouri and the Federal *No Call Lists* years ago. That wo
Exactly Don. Thanks for that comment. That's what the boys at Elecraft
recommended when K3S was first announced and we had a field day (pun) with
remarks about plural, etc when guys tried to match the logo. You'll notice
that Wayne always uses K3S now on this reflector. I am still trying to
Andy,
Pick up a copy of the DVD "North Atlantic Crossing". Two young men used
what appeared to be an Icom HF rig for long distance communications on HF
air bands to contact various European airports on their route to Norway.
They installed a large, salt water fishing reel in the modified, single
e
Apparently correct, Lynn. I had my garage door serviced two weeks ago and the
last thing the repairman did was pop open the frosted plastic bulb cover on the
opener and say "just making sure you don't have LED bulbs in here. They play
havoc with the receiver on the openers). He said most ever
My last cruise on Royal Caribbean was, I believe, Sovereign of the Seas (?). I
had no plans to actually operate on the ship, but I met the Captain during the
opening night reception and we had a chat. Upon finding out my interest in
amateur radio, the Captain said "hey, you'd like to meet "Per
I have been using a Blade CX2 RC helicopter to fly antenna wires up above tree
tops for quite a few years now. I had added an LED nav light kit to the CX2
(red, green plus white landing light) and it runs off a simple on/off toggle on
the transmitter. I installed a small servo on the belly of
No, Brian. I have done none of the software mode settings. I’ll take another
look though and more testing.
Thanks and 73,
Terry, W0FM
From: Brian Waterworth [mailto:brian.waterwo...@gmail.com]
Sent: Monday, August 07, 2017 4:17 PM
To: Terry Schieler
Cc: Elecraft List
Subject: Re
I have been watching this thread carefully since it began, and, combined with
my experiences over this past weekend, am now more confused than ever. Don,
W3FPR recently (again) gave very succinct instructions for getting a good
starting audio point for the ALC readings. I had previously not be
More interest here than I expected on this, so I've decided to post my
direct response to Erik here as well.
Terry, WØFM
Hi Erik,
I just replaced my two 20 year old Lennox units with 4.0 Ton and 3.5 Ton
Trane units. Before the installers left I asked for a chance to check the
radios in the sh
ginal Message-
From: Ron D'Eau Claire [mailto:r...@cobi.biz]
Sent: Friday, May 19, 2017 12:42 PM
To: 'Terry Schieler'; 'Bill W4ZV'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] Fire in the house li-ion
Have you ever had a battery failure and fire in one of them?
T
I have been using charging bags similar to these for over 6 years to charge
LiPO batteries for my fleet of RC airplanes. Very prevalent and highly
recommended within the RC hobby field. Not necessarily this specific brand,
but I've never had an issue.
73, Terry, W0FM
-Original Message
Thanks. My point exactly, Guy.
Terry, W0FM
From: Guy Olinger K2AV [mailto:k2av@gmail.com]
Sent: Thursday, April 20, 2017 8:40 PM
To: Ron D'Eau Claire; Terry Schieler; elecraft@mailman.qth.net
Subject: Re: [Elecraft] A little theory
Kind of like the sea drawing out bef
POOF! Hey what happened to the ground rod through concrete thread? ;o)
Terry, W0FM
-Original Message-
From: brian [mailto:als...@comcast.net]
Sent: Thursday, April 20, 2017 1:35 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia
Good point. Here is my "theory" on this OT overload thing, Ron. When the
Off Topic contents of the posts become so frequent and overbearing, there
appears to be a direct correlation with a void in new product announcements
from the boys at Elecraft, which normally incite On Topic comments that fi
Don wrote,
<"3) Audio levels - ignore the internet advice to adjust the power with the
audio level. Adjust the audio to illuminate 4 bars solid on the ALC meter with
the 5th bar flashing. This is the "NO ALC" point for these Elecraft
transceivers - the first 4 bars are present to allow you to
Back in 2013, I purchased a custom shipping box from Dave Haller, KA1W, of
www.hamradioboxes.com with which to ship an Acom 1000 amplifier that I was
selling. It was pricy, but so was the amp. I would not have purchased one for
just a half a K3 round trip to Elecraft Service, but if you are d
And, we musicians refer to our mistakes as "improvisation".
Happy New Year!
Terry, W0FM
-Original Message-
From: Phil Hystad [mailto:phys...@mac.com]
Sent: Saturday, December 31, 2016 9:29 AM
To: Dauer, Edward
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] {OT} - On Professiona
x27;m looking forward to seeing a blog post with the official "S" scaling :)
73,
Wayne
N6KR
-Original Message-
From: Terry Schieler [mailto:w...@swbell.net]
Sent: Saturday, October 15, 2016 6:47 PM
To: 'Charlie T, K3ICH'; elecraft@mailman.qth.net
Subject: [Elecraft] M
Actually, way back when the K3S was introduced, we poked a lot of fun at not
being able to distinguish the new K3S from the possessive of a K3 or the
quantities of K3Ss. Those of us involved in those exchanges were clear when
Wayne "suggested" that we use K3S (capital S) for the new radio when pos
I agree, Eric. I started in ham radio in 1962. I love tapping into the new
technology but it's not as easy as you grow older. My son continues to beat me
up over the fact that I still have my newspaper delivered every day. Tramping
through the snow and rain to retrieve it. Sometimes it's we
Don wrote,
I built a new home in 1996. After living there a few years I noticed an
intermittent issue with an outlet on the first floor. Upon opening up the
outlet box I discovered the green "safety ground" coiled up, disconnected in
the back of the box. I fixed that. Then I used a recept
Earl, K4KAY wrote " No soldering, just a lot of small screws, nuts, washers and
lock washers. My age is 78."
I am 69 and with apologies to all the members of this site who don't have
enough years behind them to get this, I will simply state "think Erector Set".
Terry, WØFM
-Original
I have both. Neither has ever been installed. Contact me direct please.
Terry, W0FM
My call at arrl dot net
-Original Message-
From: EricJ [mailto:eric.c...@gmail.com]
Sent: Wednesday, August 03, 2016 2:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 73CNC Knobs
Wonderin
Looks like my K-Pod should arrive tomorrow. Does it come with the DC power
modification resistors and mod instructions or do I need to order those?
73,
Terry, W0FM
-Original Message-
From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: Thursday, July 07, 2016 9:37 PM
To: Elecraft Ref
Interestingly, just below the listing on Amazon for "The Electronics of
Radio" is an offering of a book called "Ham Radio For Beginners" which
features on the cover a sharp photo of a VHF Marine Radio!! ;o) Aspiring
amateurs could probably teach this author a thing or two about Amateur
Radio:
ht
Apparently so, Bob. Hard to believe this many Elecrafters were absent when we
beat this "Touch Screen" dead horse to death three weeks ago. ;o)
Terry, W0FM
-Original Message-
From: riese-k3...@juno.com [mailto:riese-k3...@juno.com]
Sent: Monday, June 06, 2016 8:08 AM
To: elecraft@mai
Probably all menu-driven because there is no excuse not to have knobs on a
rig THAT big.
Terry, W0FM
-Original Message-
From: Warren Merkel [mailto:hullspee...@gmail.com]
Sent: Friday, May 06, 2016 8:57 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New Elecraft Product for Dayton
Yes, I too was disappointed to learn that the K-Pod will not be available as a
kit. Some of you who are similarly disappointed might consider my plan to
alleviate the pain:
As soon as my K-Pod arrives, I plan to take it completely apart and then put it
all back together again. That should do
Earl wrote:
"Try using a touchscreen in a light aircraft on a bumpy air day and you will
learn to hate a touch screen."
Earl, K4KAY
Or in a Jeep Grand Cherokee on a busy highway at rush hour. I hate
Chrysler's U-Connect screen. I used to be able to count (think braille) the
knobs
Jose,
You might also contact a ham radio club or two in your area and see if they
have a classified section in their newsletters. Attracting more local interest
may make a sale quicker and less painful than one involving shipping the gear.
Just a thought.
Terry, W0FM
-Original Message
There are a number of new users on this reflector since the announcement of the
K3S transceiver last summer. Please indulge me a bit of bandwidth to update
the newcomers to a request made back then by Wayne.
During the initial announcement of the K3S, we all shared some laughs about how
the ne
I have the factory-built K3 Navigator sound card Interface Cable set that I no
longer need. It is like new. Current price from Timewave is $54.95 +$7.50
shipping. I am selling it for $30 shipped (US). Please contact me directly if
interested at: mycall at arrl dot net. Thanks.
73,
Terry,
I was up in the air about the best KE7X publications to purchase for my
particular application. I ventured to Fred's website www.ke7x.com and found
that he had created a nifty new home page, much easier to navigate than in the
past. You'll find a handy chart that helps you match your needs wit
Hi Steve,
I have used a pair of Motorola HSN4018C mobile radio speakers with my K3 for
years, as well as now with my new K3S. They are tailored for
communications-grade voice frequency response. They are black and look great
next to the rig. They are not inexpensive if you order them new, b
I have Snip and use it a lot, but it doesn't "scroll" for long documents.
Terry, W0FM
-Original Message-
From: Ralph McClintock [mailto:w...@comcast.net]
Sent: Wednesday, October 14, 2015 6:00 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S - Method to print K3/K3S configurat
I have a recent configuration file from my former K3 (#474) saved in my K3
Utility. I was hoping to print out that file and use it as a guide to setting
up my new K3S, knowing better than to simply load (restore) the old K3
configuration file into the new K3S radio. Fred, KE7X, points out in h
I have the Master Cable assembly for the Navigator Data Interface that has been
factory-configured for the Elecraft K3. Sold the Navigator and the buyer
didn't need the K3 cable. Works perfectly. Like new, $35 shipped USA. Direct:
mycall at swbell dot net.
Terry, W0FM
__
I'm guessing that Eric is looking at Wayne, OR, Wayne is looking at Eric right
now and saying "SEE.I told you so". ;o)
Terry W0FM
-Original Message-
From: Alan [mailto:n...@sonic.net]
Sent: Tuesday, September 15, 2015 10:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] El
FS: K3/100, (#474 from kit). Mint condition. Perfect working order.
One-owner, non-smoking environment. Never mobile or portable. Includes: KAT3
Internal ATU/2nd Ant Jack, KRX3 Sub Receiver, KBPF3 General coverage RX
module, KXV3 Transverter Interface with Ant I/O. KDVR3 Digital Voice Re
FS: K3/100, (#474 from kit). Mint condition. Perfect working order.
One-owner, non-smoking environment. Never mobile or portable. Includes: KAT3
Internal ATU/2nd Ant Jack, KRX3 Sub Receiver, KBPF3 General coverage RX
module, KXV3 Transverter Interface with Ant I/O. KDVR3 Digital Voice Re
W0FM
-Original Message-
From: Terry Schieler [mailto:w...@swbell.net]
Sent: Friday, July 31, 2015 11:04 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] (K3S) Transferring configuration from K3
Elecraft has advised me that my new K3S will be shipping in several days. I
believe I recall some com
Elecraft has advised me that my new K3S will be shipping in several days. I
believe I recall some comments here regarding saving my current K3
configuration to the K3 Utility in order to transfer it to the new K3S. Seems
like the suggestion some time back was to change the serial number in the
PR-6 Low Noise 6-Meter Pre-Amp for sale. Excellent condition. Includes cable,
instructions and 2 Male-Male BNC connectors for direct connection to back of
K3. $105 shipped. Contact off line please.
73,
Terry, W0FM (at swbell dot net)
___
I am "building" a K3S on paper and have a filter question. I am told that if I
want AM and FM transmit capabilities I can just order the 13kHz FM filter and
save the price of the 6kHz AM filter. Certainly seems logical that the 13kHz
FM filter bandwidth could handle the 6kHz AM signal (no inte
Or, when in the "SPLIT" mode, and transmitting on VFO A, have the display
programmed to scroll "UP UP UP U IDIOT". ;o)
Terry WØFM
-Original Message-
From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: Tuesday, February 17, 2015 6:38 PM
To: Elecraft Reflector
Subject: Re: [Elecraft]
Similar to Phil's approach, rather than using the metal roll pin, I break off a
wooden toothpick in the retention hole and put a drop of super glue on the
toothpick.
Terry W0FM
-Original Message-
From: Phil & Debbie Salas [mailto:dpsa...@tx.rr.com]
Sent: Tuesday, February 17, 2015 1
That's a first for me. Been a ham for 53 years, buying, selling and trading
gear. First time I've ever seen someone request a Starbuck's Gift Card to
cover payment for anything! ;o)
Very creative, Phil.
Terry, W0FM
-Original Message-
From: Phil Hystad [mailto:phys...@mac.com]
Sent
Hi Rick,
My local Radio Shack still offers 2.5mm stereo plugs. It would be about a 3
minute job to solder the free cable leads to it, even if my solder station was
dead cold to start. Good luck.
Terry W0FM
-Original Message-
From: Rick Dettinger [mailto:k7m...@gmail.com]
Sent: Mond
I ultimately went to the Boss FS-5U as well. My guitar player used the same
one for years and I figured if that dude couldn't break it, it would be good
enough for me. Normally Open. No modification. I love mine.
Terry, W0FM
-Original Message-
From: Mark Stennett [mailto:m...@stenn
Sal,
The main problem with kites is safety. One doesn't always know when the kite
will change directions, dive or loop, with the potential of the kite wire
crossing over a very deadly, high voltage utility line. Poof! You are vapor.
73,
Terry, W0FM
-Original Message-
From: Slava B
Jessie,
Any chance I could get an autographed 8x10 glossy of you doing that maneuver?
;o)
73,
Terry, W0FM
-Original Message-
From: Jessie Oberreuter [mailto:joberreu-elecr...@moselle.com]
Sent: Monday, April 21, 2014 4:07 PM
To: Walter Underwood
Cc: Elecraft@mailman.qth.net Reflect
Eric,
Thanks for ending this thread. I had donned my flame resistant suit the
moment I hit the "send" button after writing my idea. I assumed that one or
two of our fellow amateurs would fire a shot at someone who replied to my
thread without having even thoroughly read and understood it. I wil
My needs are much simpler than those involving international frequency tables,
license classes, memory locations, etc. I haven't thought this through
thoroughly so I don't know all the ramifications. I'll leave that all to
someone smarter than me.
I know that I am quite embarrassed to be told
I've also noted that some respondents post with absolutely *none* of the
original post that they are responding too. That is equally frustrating as
well. Please include at least a bit of the relevant post for those of us who
read in digest mode. Thanks.
Terry, W0FM
-Original Message---
When I built my present (brick and frame) home in 1996 I was fortunate enough
to work with my builder and architect and had them design the attic to be void
of all HVAC ductwork, AC wiring, low voltage wiring (alarm and telephone) and
stereo speaker leads. The builder thought I was a kook (not
Jack,
I just sent my K3 (474) off to Elecraft service after wrestling with that same
problem. My TX output was suddenly all over the place. The K3 power out bar
graph showed 25% lower power than I had dialed up, but good, calibrated
external watt meters were showing 40-50% higher power than wh
Correct, Ken. Then there is the "capture affect" of FM. Stronger FM signals
could wipe out a transmission from another aircraft causing concerns. With AM,
there is a greater possibility to pick out a weak signal in the presence of a
stronger signal and avoid incidents. A real plus if you are
I hadn't used my K3 (#474) for a few days when I checked into the Elecraft SSB
net on Sunday. I immediately noticed that the Power Out bar graph was peaking
only around 60-70W. It normally peaked closer to full output on voice peaks.
Later I checked it with CW and it was still only hitting abo
I'll have to go on record as disagreeing with Matt, W6NIA's statement below.
Elevated radials *are* better than buried radials only *if* the vertical is not
ground-mounted and the radials are tuned to resonance for each band.
With ground-mounted verticals, the radials need not be tuned and do
After you're caught up building everything Elecraft offers and still have that
need for melting solder, this unique shack clock is available in KIT form!.
Terry, W0FM
http://hackedgadgets.com/2010/06/23/multimeter-clock-styled-after-the-simpson-260-multimeter/
___
I am concerned about the reliability of BT for RS-232. My new 2014 Jeep has BT
in the entertainment center and it drops data during songs from my iPhone and
Pandora apps with the iPhone about 2 feet from the entertainment console. I'm
thinking that these holes in the music audio may be due to
ppreciation for what Elecraft, Powerwerx and Rose (and YOU)
all do every time I walk back to my shipping department. ;o)
73,
Terry, WØFM
From: Ken G Kopp [mailto:kengk...@gmail.com]
Sent: Monday, June 17, 2013 1:44 PM
To: Terry Schieler
Cc: Walter Underwood; Elecraft Reflector
Subj
I'd have to need a whopping large quantity of these retainers to justify the
shipping and handling ($6.49) that Powerwerx wants to ship 5 of these little
$0.49 devils to me here in the Midwest. Perhaps someday I'll buy some other
stuff from them and order a dozen clips at the same time. Perhap
A few years back, someone posted a suggestion to help spread the word about
our hobby. Take old copies of your amateur radio periodicals and drop them
off in the waiting rooms of your health care providers, car care centers,
state license offices, etc. Six months ago I put retired copies of CQ an
Ah. Reminds me of the 60's when my band could not afford the top of the
line Anvil road cases and resorted to buying amp case parts from Fender and
others to build our own racks. Bob Heil custom built our mixers, EQs and
mains and monitors for us. Another local musician, Jay Barry, began making
Back in the late 80's I ordered a TS-950 sight-unseen from a catalog. It was
to replace my trusty TS-180SAT. When it arrived I thought they'd accidently
sent me TWO 950's in the same box. I had not paid any attention to the size
and weight specs of the rig when I ordered it. It was so huge,
I had the same problem with my Lynksys. Replaced it with a Netgear and birdies
are gone. Don't have the specific model number in front of me. YMMV.
Terry, W0FM
-Original Message-
From: Mike K2MK [mailto:k...@comcast.net]
Sent: Monday, June 03, 2013 6:04 AM
To: elecraft@mailman.qth.net
What sad news. Phil and I became friends after conversing about the recipes for
his spices. I ordered a large variety and he threw in a couple others that he
"recommended". He was passionate about his cooking products, Elecraft, our
hobby and life in general. Great guy. I will think of him e
Regardless of your definition of "sport", this is one of the best articles I've
seen (especially from 1958) that explains in layman's terms, the idiosyncrasies
of our fine hobby and the hobby-within-a-hobby that is DX contesting. It was a
very enjoyable read and I've shared it with others.
(
Yesterday, during the CW contest, I noticed that my K3-100 (#474) suddenly
began to "stutter" during CW transmissions on the low end of 40 meters. I
hadn't noticed this before, including Saturday, the first day of the contest.
My CW transmission had a "chattering" sound something like the braa
Interesting observation, Ken. After seeing a upsurge of interest in G5RV
antennas discussed on various ham radio reflectors (and noting that the
interest seems most enthusiastic among newly-minted hams), I honestly feel that
the recommendations from one new ham to the next seems to be based on
The Acom amp has been sold. Thanks for the responses.
Terry, W0FM
-Original Message-
From: Terry Schieler [mailto:w...@swbell.net]
Sent: Saturday, February 09, 2013 3:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] OT - FS, Mint ACOM 1000
Less than 1 hour operating time
Less than 1 hour operating time. Perfect condition. Shipped in custom
carton built by Dave at hamradioboxes.com. Perfect setup for DXpeditions.
More info at: w0fm at arrl dot net
Terry Schieler, W0FM
__
Elecraft mailing list
Home
The viewing angle is adjustable. if you own a decent heat gun. ;o)
Terry, W0FM
-Original Message-
From: Richard Gillingham [mailto:w...@hotmail.com]
Sent: Friday, February 08, 2013 7:56 AM
To: c-haw...@illinois.edu; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Nifty stand for KX
Ken wrote: " Several of the parks on the beach have Seasonde equipment housed
in the plumbing areas between the men's and women's bathrooms, and I have
photos of these installations,"
Ken was very fortunate. If any of the rest of us had been spotted with a
camera in the walls between the men
That's exactly what I experienced on #474 just after I built it. The washer
rattled. There were a few supportive posts here alluding to the same issue
at that time. However, Elecraft support said it was something obvious that
I had done incorrectly in construction. I went back and retraced all
-Original Message-
From: Stephen Roberts [mailto:steve...@shoreham.net]
Sent: Tuesday, December 04, 2012 12:37 PM
To: Terry Schieler
Cc: 'Bob K6UJ'; 'Elecraft Reflector'
Subject: Re: [Elecraft] Power pole connection comes loose
A small drop of cyano (crazy) glue is m
I don't use the metal PP roll pins for the same reason. I do, however, use
plastic cocktail toothpicks with satisfactory results. Wooden toothpicks work
as well, as long as it's a snug fit.
Terry, W0FM
-Original Message-
From: Bob K6UJ [mailto:k...@pacbell.net]
Sent: Monday, Decemb
Thom,
The K3 issues that you see on this reflector are here because issues can be
brought here and resolved quickly. And I think if we could categorize all of
them we would surely find that many of them are simple configuration issues or
operator error.
I love my K3 and, in my mind, there is
And, unfortunately, AT&T chooses to use Yahoo to process email for AT&T
customers, so AT&T email domains like mine that end in @swbell.net,
@sbcglobal.net, @bellsouth.net, @att.net, etc are as vulnerable as the accounts
that actually say "Yahoo" in the address. Don't let the fact that your emai
Not a problem, Mitch. I suspect that most of us realized what had happened.
This just underscores the need for us all to sit back and take a breath before
pouncing on a poster. Hopefully N5GE will accept your explanation.
73,
Terry, W0FM
-Original Message-
From: Mitch Wolfson DJØQ
Wayne,
Happy Birthday! And I offer you this W0FM gem
"With advancing age comes a wealth of knowledge.
I just wish I could remember it."
Terry, W0FM
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Monday, October 01, 2012 7:54 PM
To: Wayne Burdick
I have experienced exactly what Mike has described below. I found that auto
tuners in my old Kenwood TS850-S/AT, my LDG, my K3 and others seem to get to a
"reasonable" match then stop. In most every case a second press of the tuner
button would, in just a few milliseconds, give a totally flat
I purchased two of these devices from Amazon right before someone on this
reflector posted that the one he bought got very hot to the touch and the
seller took it back and refunded his money.
I now have two of these and neither has even gotten warm. Both seem to work
fine. Can't believe no sh
I also use the Logitech 360, Bob, and have had perfect results. I was not
pointed to that model by anyone, just saw it in the local big box store and
brought it home. My P3 loves it too!
Terry, W0FM
-Original Message-
From: Bob [mailto:wb4...@gmail.com]
Sent: Wednesday, August 29,
Hi Joe,
Sorry to hear about the noise level. Can I recommend that you listen to the
net and wait until Phil,NS7P (Net Control) asks if there are any "relays". Put
your call in there. Some of the noise on the frequency will have subsided by
then as, at that point, most all check-ins will have
The KAT100 auto tuner has been sold. Thanks to all who replied.
73,
Terry, W0FM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.n
Perfect companion for your K2. KAT100-1 Auto Antenna Tuner. 150W. Built from
kit in December, 2011. Never used. All tests successfully completed. (Buyer
will need to complete rig-half of the K2 interface cable to suit your
installation).
Complete with all interconnect cable parts, power
Any reason that my existing "wireless" USB keyboard would not work with the
P3/SVGA setup? Its RF currently causes me no problems in my shack.
Terry, W0FM
-Original Message-
From: Rick Prather [mailto:k6limae...@gmail.com]
Sent: Tuesday, July 24, 2012 7:38 PM
To: Elecraft@mailman.qth
commercially
today in the public safety field.
No connection to the company, blah, blah, blah, etc.
Terry, W0FM
From: guyk...@gmail.com [mailto:guyk...@gmail.com] On Behalf Of Guy Olinger K2AV
Sent: Thursday, July 19, 2012 10:23 AM
To: Terry Schieler
Cc: Don KB1YBG; elecraft@mailman.qth.net
Subject
Hello Don,
>From the commercial side, I use the NCS 3240 Multi Switcher. Numerous input
>devices, up to 4 radios. Individual level settings, etc. Love it.
http://www.ncsradio.com/m_switch.html
73,
Terry, W0FM
-Original Message-
From: Don KB1YBG [mailto:thompsond...@gmail.com]
Sen
Correct, Bill. In my younger day's I had wired a micro switch to the bass drum
pedal of my drum kit for the purpose of setting off pyrotechnics on stage.
Long after my retirement from professional music (as well as from blowing
things up) I tried to use the bass drum pedal as a PTT switch just
Don,
Along this line, I think I see that the Line Out level (Mic control) in Data A
mode on my K3 needs a bit of "tweaking" when changing bands to get the ALC
level to maintain the 4 bars with the 5th flickering. Does this sound normal?
Could it be the reason for someone like Bill (below) to
1 - 100 of 288 matches
Mail list logo
