Not knowing much about the protocol Elecraft / Microbit uses, or the IT
staff at the facility, I have doubts about what is being done to figure out
what the problem is. There are tools, such as Wireshark to look at the
packets as they flow through or don't flow through the network. You don't
have
Another idea is to check the port settings on the router to ensure the port
that Elecraft is using is “open”.
> On May 16, 2018, at 5:57 AM, rich hurd WC3T wrote:
>
> I'm just spitballing here, but could the net connection there be double
> NATted so that the rig can't see the
I'm just spitballing here, but could the net connection there be double
NATted so that the rig can't see the packets returning (since they have a
different address?)
Packets are packets. I had this problem - loss of connectivity - albeit
with a media server in my house that I wanted to be able
I have been working with a retired doctor ham friend of mine who has
moved into an assisted living facility. He has been licensed and active
for more than 40 years.
He wanted to be able to use his K3 remotely and I had helped another
friend of mine who is blind and is also a long time active
When you power your K3/0 down, does the remote K3 turn all the way off
[i.e. go totally dark]?
Who is beeping -- K3/0 or RRC? Control-end or remote-end?
Does it do this *every* time [i.e. totally repeatable]?
Is your control path *really* "through the Internet ... IAW does your
remote-end
Wayne,
That sounds like a "flaky" internet connection may be your problem.
Talk to your ISP support people - it may take 2nd or 3rd level techs to
get to the bottom of it.
73,
Don W3FPR
On 9/23/2017 8:58 AM, Waynetheking wrote:
Having Trouble with my K3/0 Remote Station.
For the last week
Having Trouble with my K3/0 Remote Station.
For the last week 9/18 thru 19/23 I turn on the supply and then the K3/0 and
the remote station comes up and plays as it should. Later in the day when I
shut it down during the day it will not come back up and all I get is a
bunch of beeps.
This
Guys, what is the best way to cable the K3/0 plus Remote Rig to a PC for sound
card digital ops?
Tnx. HNY,
Brian W3BW
--
Brian F. Wruble, CFA
1107 Key Plaza, PMB 447
Key West, FL 33040-4077
PO Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930-0057
eFax 305.768.0278
Hi all:
I have a very nicely functioning remote setup. I control the complete
K-Line in Maryland from a K3/0 in Key West. However, I have tried and
tried, and I cannot get CW keying to work with N1MM or Writelog.
I do have CW working with my regular (non-contest) logger, CommCAT. It
uses the
everything is good, though I still
can't ping my MD address from inside my FL network.
Begin forwarded message:
From: bwru...@gmail.com bwru...@gmail.com
Date: December 19, 2013 at 9:27:04 AM EST
To: Elecraft Reflector elecraft@mailman.qth.net
Subject: Fwd: K3/0 to K3 RemoteRig issue
forwarded message:
From: bwru...@gmail.com bwru...@gmail.com
Date: December 19, 2013 at 9:27:04 AM EST
To: Elecraft Reflector elecraft@mailman.qth.net
Subject: Fwd: K3/0 to K3 RemoteRig issue
OK guys. Don't waste time on this. The problem is definitely the router.
I cannot successfully
Hello all,
I have got my K3/0 here in Key West beautifully controlling my K3/100 + KPA500
+ KAT500 located at my big station in MD.
I cannot figure out how to get CW keying using N1MM or Writelog. Can someone
guide me through the hookup? I am able to read frequencies from the K3/0
using
Hi all. I could use some advice. I have spent the last several months
building the complete K-Line for my MD summer QTH. I am now preparing to
operate via RemoteRig from a K3/0 located remotely. I was hoping for a test
run in Sweepstakes this weekend.
Everything was working fine, and
If you have ideas, please email direct. I forgot that I was in digest
mode for this list.
After multiple recycling of the power to the radio end router, I am back in
business. I am going to just leave it on until the contest ends.
73 de Brian W3BW
*Brian F. Wruble, C.F.A.
*70 is the new
you are up and running!
Chris
N6WM
From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] On
Behalf Of Walt W0CP [w...@comcast.net]
Sent: Sunday, November 10, 2013 7:49 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3/0 to K3
After more testing, I see that, as stated previously, this is a display
problem. When in ssb mode and pressing PTT I am modulating the k3 even
though the k3/0 diplays cw mode.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-0-to-K3-100-twin-issue-at-K6LRG
.nabble.com/K3-0-to-K3-100-twin-issue-at-K6LRG-tp7567299p7580482.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
CW+SSB is not enabled
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-0-to-K3-100-twin-issue-at-K6LRG-tp7567299p7580492.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
...@mailman.qth.net [elecraft-boun...@mailman.qth.net] On
Behalf Of Walt W0CP [w...@comcast.net]
Sent: Wednesday, November 06, 2013 8:36 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3/0 to K3/100 twin issue at K6LRG - mode switches
usb to cw
I am having this problem right now. Front panel PTT
.365791.n2.nabble.com/K3-0-to-K3-100-twin-issue-at-K6LRG-tp7567299p7580504.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
My friend uses the K3/0 to connect to my K3, and that works fine.
But when I use my K3, I use Ham Radio Deluxe which would normally connect to
the 9 pin RS232 on the back of my K3, but since I have one of the remote boxes
connected to my K3 9 pin RS232, I would use the com1 on the front of the
On Sat, Aug 24, 2013 at 9:58 AM, Steven Bertsch sabert...@gmail.com wrote:
My friend uses the K3/0 to connect to my K3, and that works fine.
But when I use my K3, I use Ham Radio Deluxe which would normally connect to
the 9 pin RS232 on the back of my K3, but since I have one of the remote
It works!!! FANTASTIC!!! Thanks so much iain. I had to make the baud rate
change to 38400. It was set to 9600.
73, Steve K6SAB
On Aug 24, 2013, at 11:00 AM, iain macdonnell - N6ML a...@dseven.org wrote:
On Sat, Aug 24, 2013 at 9:58 AM, Steven Bertsch sabert...@gmail.com wrote:
My friend
Brandon gave me about an hour on the phone, and we got all the settings just
right. I can now operate remotely using RemoteRig and the K3/0 to my K3/100.
It works --- with a couple of quirks.
Quirk 1--- if you use the Heil ProSet Elite iC (made specially for Icom,) the
jumper JMP1 in the
I am not an authority on Remote Rig, but it would seem to be that JMP1
controls the microphone bias.
The Heil Proset-K2/K3 sold by Elecraft is essentially the same as the
Proset-iC in that it needs bias to operate.
There are so many versions of Heil microphones that one needs to be
specific
I have tried everything. Yes, I have the jumper out in the control box of
the RemoteRig. Has anybody successfully gotten a Heil mike to work?
My MH2 works FB with the JMP1 jumper in. I have full function and have had
a successful remote QSO, linked over the internet. I have absolutely no
I have the remote setup working on the desktop. It is pretty neat the way
the K3 is slaved to the K3/0. Every button, every knob --- they move in
lockstep.
Audio quality is definitely degraded even though both RemoteRig is plugged
into the same router.
I have an immediate question --- is
Greetings all-
We are testing a configuration of a K3/0 K3/100 twin setup. the K3/0 is in
the qth, the K3/100 is at K6LRG with appropriate internet connections and port
throughs on both locations. We have been able (thanks in particular to a great
deal of help from N6ML) to get the system
On 12/17/2012 9:12 AM, Chris Tate - N6WM wrote:
Looking for some suggestions from the elecraft brain trust on this one
Check the setup of N1MM -- the Mode tab, I think it's called. Depending
on which box is checked, it can put the radio in the wrong mode.
73, Jim K9YC
AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3/0 to K3/100 twin issue at K6LRG
On 12/17/2012 9:12 AM, Chris Tate - N6WM wrote:
Looking for some suggestions from the elecraft brain trust on this one
Check the setup of N1MM -- the Mode tab, I think it's called. Depending on
which box
, 2012 9:35 AM
To: Elecraft Reflector
Subject: [Elecraft] K3/0 to K3/100 RemoteRig transmit audio problem
I am using a K3/0 and a K3/100 with the RemoteRig boxes. I have the
standard versions as sold at HRO not the ones with the special microphone
jumper module. I jumpered the mic connections
I am using a K3/0 and a K3/100 with the RemoteRig boxes. I have the
standard versions as sold at HRO not the ones with the special microphone
jumper module. I jumpered the mic connections as shown in the RemoteRig
manual on page 193 and I have horrible digital noise on my transmit audio
even
*Subject:* Re: [Elecraft] K3-0 to K3 Upgrade Kit ???
Not at this time. Possibly in the future, but just the front panel and
case can be reused.
73,
Eric
---
www.elecraft.com
On 2/23/2012 9:28 PM, Jim Miller KG0KP wrote:
Seems like I remember this being asked but did not catch
Reflectorelecraft@mailman.qth.net
*Sent:* Friday, February 24, 2012 2:39:50 PM
*Subject:* Re: [Elecraft] K3-0 to K3 Upgrade Kit ???
Not at this time. Possibly in the future, but just the front panel and
case can be reused.
73,
Eric
---
www.elecraft.com
On 2/23/2012 9:28 PM, Jim Miller KG0KP
. ;-))
Vy 73, Olli - DH8BQA
http://www.dh8bqa.de/
- Original Message -
From: Mitch Wolfson DJØQN dj...@gmx.net
Cc: Elecraft Reflector elecraft@mailman.qth.net
Sent: Saturday, February 25, 2012 10:19 AM
Subject: Re: [Elecraft] K3-0 to K3 Upgrade Kit ???
Correctionthe TTL connector
: Elecraft Reflectorelecraft@mailman.qth.net
Sent: Saturday, February 25, 2012 10:19 AM
Subject: Re: [Elecraft] K3-0 to K3 Upgrade Kit ???
Correctionthe TTL connector is used to power the remote heads, not
the AUX/MIC connector. I looked at the wrong RRC (a Yaesu Twin one
instead of TS-480
Not at this time. Possibly in the future, but just the front panel and
case can be reused.
73,
Eric
---
www.elecraft.com
On 2/23/2012 9:28 PM, Jim Miller KG0KP wrote:
Seems like I remember this being asked but did not catch the answer.
Can the K3-0 be upgraded/converted to the K3?
In the
, February 24, 2012 2:39:50 PM
Subject: Re: [Elecraft] K3-0 to K3 Upgrade Kit ???
Not at this time. Possibly in the future, but just the front panel and
case can be reused.
73,
Eric
---
www.elecraft.com
On 2/23/2012 9:28 PM, Jim Miller KG0KP wrote:
Seems like I remember this being asked but did
elecraft@mailman.qth.net
*Sent:* Friday, February 24, 2012 2:39:50 PM
*Subject:* Re: [Elecraft] K3-0 to K3 Upgrade Kit ???
Not at this time. Possibly in the future, but just the front panel and
case can be reused.
73,
Eric
---
www.elecraft.com
On 2/23/2012 9:28 PM, Jim Miller KG0KP
Seems like I remember this being asked but did not catch the answer.
Can the K3-0 be upgraded/converted to the K3?
In the future?
Thanks es 73, de Jim KG0KP
__
Elecraft mailing list
Home:
40 matches
Mail list logo