as an Administrator?
If not, right click on the setup file and select “Run as Administrator”. Do the
same when running the Utility.
I just downloaded the latest utility and installed/ran without issue. This is
Win10 x64, but I also run it on W7.
Ken K6MR
From: Brian Linn
Sent: Sunday, August 23
The banks are doing what they are told to do by the Central Bank. Can you say
“financial repression”?
Ken K6MR
(Sorry Wayne/Eric for the OT)
From: Richard Fjeld
Sent: Thursday, September 24, 2015 09:22
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: Price Increase Alert for mid
something else at
the far end it’s easy to expand.
Ken K6MR
From: Va3ied
Sent: Wednesday, December 30, 2015 06:48
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Remote KAT500
My tower and garden shed are about 150 feet away. I have LMR400 buried inside
some PEX pipe. Would like to use
Check option 4 in the CW WGHT menu to be sure it is set to VOX NOR and not AUTO
OFF.
Otherwise it should be whatever it was when you last powered off. Assuming you
are not killing the power supply instead of using the power button.
Ken K6MR
From: John via Elecraft
Sent: Monday, December 21
Are you using the KAT500 Remote program? Mine are only 15 feet away in a
closet, but I never have to touch the units. They are connected using an IP to
Serial converter. Works perfect.
Ken K6MR
From: Va3ied
Sent: Tuesday, December 29, 2015 18:17
To: elecraft@mailman.qth.net
Subject: Re
Yes.
Ken K6MR
From: Armandhammer via Elecraft
Sent: Monday, November 23, 2015 13:54
To: elecraft@mailman.qth.net
Subject: [Elecraft] Powering up the KAT500
I just purchased a KAT500. The tuner automatically turns onas soon as I switch
on my power supply. Is this normal??
Thanks,
Butch
worry.
Ken K6MR
From: Irwin Darack<mailto:idar...@gmail.com>
Sent: Wednesday, January 27, 2016 14:15
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] KPA500 in RTTY Contesting
I am curious to others experience with the KPA500 in a RTTY Contest. What
I monitor mine with the remote program which shows temp on screen. When the
fans go to high speed the temp drops very quickly. The thermal design appears
to have plenty of reserve capability. I think the temp cut off is 90C. I’ve
never seen mine go above 73C.
Ken K6MR
From: Bob McGraw K4TAX
ion of the
KPA500: I have the amps in a closet and never touch them. They just work.
My hope is that Elecraft becomes a giant corporation with enough R capital to
bring back the KPA1500! Come on guys, buy more stuff!!
Ken K6MR
On 2/1/2016 2:39 AM, Phil Wheeler wrote:
> It might be difficult to find
of the page, click “Submit My Changes”
Ken K6MR
From: frank wiebusch via Elecraft<mailto:elecraft@mailman.qth.net>
Sent: Wednesday, February 17, 2016 21:11
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] How do I switch to digest?
I'm dense, I went
No rumors. Best we can do is photos of the original prototype.
http://www.n6ie.com/Elecraft.html
Maybe someday…
Ken K6MR
From: Petr, OK1RP/M0SIS<mailto:indi...@xsmail.com>
Sent: Thursday, February 18, 2016 09:39
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subjec
. It was really quick
because you could daisy chain from pin to pin without cutting/stripping
individual wires. OK Machine Tool also made the “Just Wrap” which was a knock
off of the same idea.
Ken K6MR
From: Mike Dodd<mailto:m...@mdodd.com>
Sent: Wednesday, April 6, 2016 17:40
To: el
Or the other alternative: “What makes an airplane fly? MONEY”
Ken K6MR
From: Kevin Stover<mailto:kevin.sto...@mediacombb.net>
Sent: Thursday, March 24, 2016 19:57
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] Too much of a good thing is j
. For example, a 5:1 SWR on
a line with 0.5 dB matched loss results in an additional 0.6 dB of loss. The
type of feedline is immaterial. Is 0.6 dB worth installing a tuner at the
antenna given the added complexity? Maybe. Maybe not. It’s all a matter of $/dB.
Ken K6MR
From: James Rodenkirch
be a problem. But a
tuner in the shack is a completely reasonable and efficient way to deal with it.
Now back to your regularly scheduled touch screen/IC7300 discussion…
Ken K6MR
From: James Rodenkirch<mailto:rodenkirch_...@msn.com>
Sent: Wednesday, April 27, 2016 11:16
To: Ken K6MR<
and two KAT500.
They appear as normal serial ports on the client and you connect using the
remote program.
But if you’ve already got the computer on the host end the software is free :^)
Ken K6MR
From: Michael Walker
Sent: Wednesday, April 27, 2016 10:26
To: Elecraft@mailman.qth.net
Subject
they are just too
small to worry about. Especially in the case of verticals, the ground losses
will be far higher unless you invest in an excellent radial/ground shield
underneath it. The tuner can’t help that.
Ken K6MR
From: James Rodenkirch<mailto:rodenkirch_...@msn.com>
Sent: Wednesday,
and completely
hands free is a big advantage. I continue to make sacrifices to the Amplifier
Gods asking for the KPA-1500 :^)
Ken K6MR
From: Don Wilhelm<mailto:donw...@embarqmail.com>
Sent: Wednesday, April 27, 2016 12:23
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
s is a simple concept easily
proven by mathematics.
On a practical level, this is the concept behind the use of open wire feed
lines. It’s been done for decades. The type of feed line does not change the
theory.
Ken K6MR
From: Jim Rodenkirch<mailto:rodenkirch_...@msn.com>
Sent: Wednes
Config -> CW WGHT -> Tap the “4” button. It’s probably set at ‘auto off’ now,
you want ‘nor’.
Ken K6MR
From: Mike Smith VE9AA<mailto:ve...@nbnet.nb.ca>
Sent: Sunday, May 15, 2016 10:13
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] Locking
be changing.
I know people like to bad mouth Windows but the vast majority of stations out
there are running it very successfully. I just don’t see any advantages to
changing at the moment.
Ken K6MR
From: Matt Murphy<mailto:m...@nq6n.com>
Sent: Saturday, July 9, 2016 21:09
To: a45wg<mail
Century.
Ken K6MR
From: Wes Stewart<mailto:wes_n...@triconet.org>
Sent: Monday, August 1, 2016 21:41
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] The amp I would like to see Elecraft build.
I'm not always on the same page as Joe, but this
Setup depends on your physical connection. Are you controlling only a serial
port or doing client/server via tcp/ip?
Ken K6MR
From: Jim Cary<mailto:jimlc...@gmail.com>
Sent: Tuesday, August 16, 2016 14:22
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elec
Nope. Just tried it (I had to know).
The fan is controlled by the uC via a BJT and voltage regulator controlled by
FETs. Without standby power everything turns off.
Ken K6MR
From: j...@kk9a.com<mailto:j...@kk9a.com>
Sent: Wednesday, February 1, 2017 5:56 PM
To: elecraft@mailman.q
Yep, flamethrower of No. Cal. The groundwave coverage is amazing.
Imagine how big that thing would be if they were on 580 instead of 1530 :^)
Ken K6MR
From: donov...@starpower.net<mailto:donov...@starpower.net>
Sent: Sunday, February 12, 2017 9:07 PM
To: elecraft@mailman.q
Config Menu -> SW TONE -> OFF
Ken K6MR
From: Gary Smith<mailto:g...@ka1j.com>
Sent: Saturday, August 20, 2016 23:08
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] Beep Beep
I just got my K3s back from Elecraft and they have entered t
“There should probably be a separate category for folks that use technology
instead of Personal skill.”
There is: Assisted vs. non-Assisted.
And then there are Sprints. Real “Boy and His Radio”* contesting.
*copyright K0HB
Ken K6MR
From: jermo<mailto:je...@carolinaheli.com>
Sent:
hear the relays click as I move into a new
segment. AFAIK the frequency data is on the aux bus, so with the stock cable it
will work fine. I built my own cables because my amps/tuners are in a closet 25
feet away.
Ken K6MR
From: George Kidder<mailto:gkid...@ilstu.edu>
Sent: Sa
So buy another KPA500 and combine them. Easy peasy.
Ken K6MR
From: Scott Manthe<mailto:n...@arrl.net>
Sent: Saturday, December 31, 2016 12:22 PM
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] Please do a KPA1500
I think a KPA1000 wou
I put mine in a closet away from the desk. Fans were probably near high at
least half the weekend. Hoping the fans have long life bearings….
Ken K6MR
From: W0MU Mike Fatchett<mailto:w...@w0mu.com>
Sent: Sunday, January 8, 2017 6:38 PM
To: donw...@embarqmail.com<ma
Not at all. My KPA500s/KAT500s are in the closet. Heat, noise, clutter all away
from the desk. The remote programs sit unobtrusively on the screen for
monitoring. The amps/tuners follow the radios automagically.
I can concentrate on making Qs.
Ken K6MR
From: James Wilson<mailto:w
(probably mis-quoted here) "If
you feel loud you are loud".
Ken K6MR
From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Richard Thorne
<rtho...@rthorne.net>
Sent: Thursday, March 30, 2017 9:31 AM
To: Elecraft Reflector
Subject: [
.
So far no problems. I use my logging program and the MicroHam router program to
insert some delay between activation and RF application. So far it's been
pretty bullet proof.
Ken K6MR
From: Bud Semon <bse...@gmail.com>
Sent: Thursday, March 30, 2017 2:32
Are you going to nx1p.net? I don’t see anything unusual here.
Ken K6MR
From: Bill Johnson<mailto:k9...@live.com>
Sent: Saturday, March 18, 2017 5:05 PM
To: KV5J<mailto:nela...@yahoo.com>; KV5J via
Elecraft<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] Linear tho
“I vote to put a second amp module in the RF Deck…”
And the advantage here is that (according to the KPA500 schematic) the control
hardware is already in place :^)
Ken K6MR
From: Andrew Faber via Elecraft<mailto:elecraft@mailman.qth.net>
Sent: Friday, March 17, 2017 10:19 AM
To: el
Check out the web page of NX1P. Reasonably simple mods to add a few dB of gain
to the KPA500 and allows full power with KX3 drive. I modified both my KPAs
because I do run them in parallel and needed a bit more gain on the higher
bands.
Ken K6MR
From: Dan Baker<mailto:km...@km6cq.com>
KPA1000 is pretty easy to do with a bit of hardware… :^)
Ken K6MR
From: j...@kk9a.com<mailto:j...@kk9a.com>
Sent: Thursday, March 16, 2017 6:42 PM
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] Linear thoughts
I still have not seen the Genius
impressive. The basic
concept is pretty simple, but as always the devil is in the details. Way above
my pay grade :^)
Ken K6MR
From: 'Stephen Bloom' sbl...@acsalaska.net
[Elecraft_K3]<mailto:elecraft...@yahoogroups.com>
Sent: Thursday, April 20, 2017 11:20 PM
To: elecraft...@yahoogrou
The Elecraft folks should be in charge of government secrets… nothing would
ever leak :^)
One interesting item in the rear panel photo: Tx Sample. Output for “Pure
Signal” style IMD improvement using pre-distortion in an SDR radio?
Ken K6MR
From: 'Stephen Bloom' sbl...@acsalaska.net
Trying to use the new AR command (switches the Rx ant on/off), but I see it was
added in FW 5.58. Latest versions I find (both beta and released locations) is
5.57.
Anyone know where it is?
Tnx,
Ken K6MR
__
Elecraft mailing list
and adjust from there. Any reason to get into the 'regular' menus
through the Menu button?
Thanks for any pointers you can pass on.
Ken K6MR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
level should be.
Ken K6MR
From: Jim N7US<mailto:j...@n7us.net>
Sent: Sunday, July 16, 2017 10:55
To: Elecraft Reflector<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] [K3S] Soundcard levels
The Windows recording and playback levels of the soundcard in my K3S seem to
both be ve
.
Ken K6MR
From: Edward R Cole<mailto:kl...@acsalaska.net>
Sent: Friday, April 21, 2017 5:03 PM
To: Elecraft Reflector<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] KPA-1500: Gain Mod when FCC Lifts 15db Rule
A little more background for the FCC (USA) gain restriction for H
you set with the
amp off/in stby. If you have ‘PWR SET’ to PER BAND it will remember the drive
level on each band. This assumes you have the amp connected to the K3 with the
appropriate cable that passes the AuxBus messages.
Ken K6MR
From: Marvin Wheeler<mailto:marvwhee...@nwlink.com>
It’s just you: http://www.isup.me/elecraft.com
It's just you. http://elecraft.com<http://elecraft.com/> is up.
Ken K6MR
From: Ian Kahn<mailto:km4ik@gmail.com>
Sent: Friday, April 28, 2017 7:06 PM
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [
Probably have to wait for the K4…
Ken K6MR
From: bill steffey<mailto:n...@arrl.net>
Sent: Friday, August 4, 2017 17:13
To: Elecraft Reflector Reflector<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] pre- distortion on k3???
Now that we will have a tx sample out on the back of
Yes. Use the Elecraft KPA500 remote software
http://www.elecraft.com/k2_remote.htm#k3remote
You can run it client/server if you have a PC on the remote end or use a serial
or USB server.
Ken K6MR
From: k...@gmx.com<mailto:k...@gmx.com>
Sent: Friday, July 28, 2017 10:50
To: el
info the better. I don’t
do assisted (no distracting band map) and my favorite contests are Sprints.
Just pure radio with a little technology to record the results.
Getting a bit OT here so I better quit before Eric finds out….
Ken K6MR
From: Buddy Brannan<mailto:bu...@brannan.name>
Sent: T
and click. This is radio, not a
video game.
And now back to your regular conversation…. ;^)
Ken K6MR
From: Phil Hystad<mailto:phys...@mac.com>
Sent: Tuesday, May 30, 2017 3:18 PM
To: Thom<mailto:k...@ki8w.com>
Cc: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject:
an interface that let you move
the controls around on the screen. Pretty much build any front panel layout
you wanted.
Ken K6MR
From: K9ZTV<mailto:k9...@socket.net>
Sent: Tuesday, May 30, 2017 5:25 PM
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft
Uh, No. CI-V is a CSMA-CD type of system, with station addressing. RS-232 is
nothing like it. You can’t just put RxD and TxD on the same wire. Data format
is way different.
Ken K6MR
From: Nr4c<mailto:n...@widomaker.com>
Sent: Sunday, May 7, 2017 10:56 AM
To: barry whittemore<m
Turn off the VFO lock. Hold the rate/lock button.
Ken K6MR
From: KG7FYI<mailto:stan...@surcp.org>
Sent: Saturday, April 29, 2017 11:04 AM
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 P3 and KAT500
Thanks Matt. Nope all bands are set to In.
.
Ken K6MR
From: Harry Yingst via Elecraft<mailto:elecraft@mailman.qth.net>
Sent: Thursday, May 4, 2017 8:02 PM
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] Remoting the KPA500 & KAT500?
More and more I'm considering remoting my KPA500 out of
My “Aux” cable is about 25 feet long. It’s just a CAT5 cable wired
appropriately. Works fine.
Ken K6MR
From: Harry Yingst via Elecraft<mailto:elecraft@mailman.qth.net>
Sent: Friday, May 5, 2017 9:38 AM
To: Michael Walker<mailto:va...@portcredit.net>
Cc: elecraft@mailman.qth.net<
I believe the most important item to note is the “TX SAMPLE” jack on the rear
panel. That has SDR written all over it.
Ken K6MR
From: Kevin Stover, AC0H<mailto:ksto...@ac0h.net>
Sent: Friday, May 5, 2017 3:26 PM
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Max-Gain Systems has 1.125” and 1.75” models if one of those would work.
Ken K6MR
From: Martin<mailto:dm...@t-online.de>
Sent: Thursday, September 14, 2017 09:12
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] OT: Looking for adaptor
Elecrafter
Green Heron Engineering is one possibility.
Ken K6MR
From: Gary Smith<mailto:g...@ka1j.com>
Sent: Tuesday, September 12, 2017 16:31
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] K3s & remote coax switching
Question: Is there a remote coax swi
Assuming it is in the vicinity of the K3, use the station power supply. If
it’s somewhere else, just about any wall wart will work. Spec is 200 mA typ.,
1.0A max.
Ken K6MR
From: Sid Frissell<mailto:sidfriss...@gmail.com>
Sent: Wednesday, August 23, 2017 20:46
To: Elecraft@mailman.q
Southern/Central
California to the eclipse area.
http://www.dot.ca.gov/dist2/travelmap.htmShould make for interesting
viewing this weekend. Click on the red dots to view the camera at the site.
I for one plan to stay well clear of I-5 this weekend…
Ken K6MR
From: Bill Fenech<mailto:w
Yes, but those electrons are really tired after all the work they did and need
to go home to rest and regenerate….
Ken K6MR
From: Fred Jensen<mailto:k6...@foothill.net>
Sent: Monday, September 4, 2017 11:05
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: R
Just set the SWR thresholds so that it automatically goes into bypass
below whatever mismatch you consider good enough.
Ken K6MR
-- Original Message --
From: "j...@kk9a.com" <j...@kk9a.com>
To: elecraft@mailman.qth.net
Sent: 29-Nov-17 09:25:43
Subject: [Elecraft
.
Ken K6MR
From: E T <etks...@gmail.com>
Sent: Monday, November 6, 2017 5:28:16 PM
To: Ken K6MR
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 actual radiated power during tuning
I know the training process, have done it many times on all my
and switch values without any rf at all.
Ken K6MR
From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on
behalf of E T <etks...@gmail.com>
Sent: Monday, November 6, 2017 4:52:17 PM
To: Fred Jensen
Cc: elecraft@mailman.qth.net
2.1K is sold. (Tnx Terry N7BDL)
Ken K6MR
From: Ken K6MR<mailto:k...@outlook.com>
Sent: Monday, October 30, 2017 17:17
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] K3 filters available
I have some K3 filters I don’t need:
(2) of the KFL3A-200
I have some K3 filters I don’t need:
(2) of the KFL3A-200 Fc = -0.98 and -0.94
(1) of the KFL3A-2.1K
$75 each shipped CONUS. Paypal preferred.
Ken K6MR
k6mr -at- outlook.com
__
Elecraft mailing list
Home: http://mailman.qth.net
Thanks for the responses (and to Eric and Wayne for the bandwidth).
Ken K6MR
From: Ken K6MR <k...@outlook.com>
Sent: Monday, October 30, 2017 5:16:38 PM
To: elecraft@mailman.qth.net
Subject: K3 filters available
I have some K3 filters I don’t nee
Proprietary. I’ve decoded a couple of messages, but AFAIK there is no
publication.
Ken K6MR
From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on
behalf of ANDY DURBIN <a.dur...@msn.com>
Sent: Sunday, April 29, 201
/A for your radio.
Ken K6MR
On 01-Feb-18 20:36:25, "Andy Faber via Elecraft"
<elecraft@mailman.qth.net> wrote:
My K3 came back from being upgraded and seems to have a new menu item,
called ATTEN, with "10db" displayed. When I turn the big knob, it stays
at that value and
The dummy load needs to be connected to the XVTR OUT jack, not the main
antenna connector. The tuner path has nothing to do with it.
See K3 manual around page 53 or so.
Ken K6MR
On 05-Feb-18 20:59:03, "John Woodard" <john.l.wood...@gmail.com> wrote:
On Sun, Feb 4, 20
(rather than absolute commands
like RT and XT) which requires knowing the current state of the function.
K3 fw 5.62, P3 FW 1.60
Ken K6MR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
You have super hi speed QRQ turned on. Go to Config->CW QRQ and set it
to off.
Ken K6MR
On 10-Feb-18 11:58:03, "Ken Widelitz" <kwidel...@gmail.com> wrote:
The "+" icon is on in the Mode portion of the LCD window in CW mode on
one
of my K3s. It is off in
you need their
high side driver board also.
Ken K6MR
From: Jack Brindle
Sent: Sunday, February 25, 2018 14:42
To: Reflector Elecraft
Subject: Re: [Elecraft] Advice needed: Remote Station Enhancement
Interesting idea, but I would talk to N6TV before going too far down this path.
The reason
Best earbuds bar none: Etymotic. Not cheap. Nothing really good is.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of kevinr
Sent: Saturday, July 21, 2018 7:39:31 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Headphone jack impedance
I
the desk and the
radios don’t make any noise.
Suum cuique!
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Grant Youngman
Sent: Saturday, July 21, 2018 9:55:11 PM
To: kevinr
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Headphone jack
e
few use the VFO linking function. Those who do use VFO linking can still
turn it on by setting CONFIG:VFO LNK to ON. This menu entry can be
assigned to a programmable function switch for easy selection if
desired, eliminating the need to bring up the menu.
Ken K6MR
On 23-Jan-18 18:01:2
Config -> VFO LNK and set to OFF. This is a by band setting so be sure you are
on 20 before changing.
Ken K6MR
From: Bob Gibson via Elecraft
Sent: Wednesday, February 28, 2018 11:42
To: Elecraft@mailman.qth.net
Subject: [Elecraft] VFO TRACKING
I have looked in both manuals to find out
Page 15 of the owner’s manual has a table of the segment width vs. frequency.
So in answer to your question: “It depends”
Ken K6MR
From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on
behalf of Harlan Sherriff via Elecraft <
The beeps are not very loud, and fairly high pitched. I don’t bother shutting
them off because I never operate on a speaker and don’t notice them. But if
your high frequency hearing is pretty good you might notice the beeps in a
quiet room.
Ken K6MR
From: Kenneth Moorman<mailto:n...@cox.
Hold F1 during power up. It will revert to beeping at the next power up so
you need to do this each time it is power cycled.
Ken K6MR
From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on
behalf of Jim Miller <j...@jtm
The RTL-SDR has a direct sampling mode that will do HF. $30 is about as cheap
as it gets. Not as good as a real P3 but it does work.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Bob McGraw K4TAX
Sent: Thursday, November 8, 2018 8:14:30
Configuration page of the utility, “Initial Power” tab. Uncheck “Power On when
DC power applied”.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Allen Bush via Elecraft
Sent: Wednesday, September 19, 2018 4:46:25 PM
To: elecraft
great, no problems since I’ve had them. Excellent physical
condition.
Please contact off list for additional info, pictures, etc.
Ken K6MR
k6mroutlook.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Both amps and tuner have been sold. Thanks for everyone’s interest.
Thanks to the list (and Eric!) for the bandwidth.
Ken K6MR
From: Ken K6MR
Sent: Friday, March 1, 2019 4:58:42 PM
To: Elecraft Reflector Reflector
Subject: KPA500 / KAT500 For Sale
The new
I don’t operate there either!
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Tom Georgens
Sent: Monday, March 18, 2019 6:01:04 PM
To: j...@audiosystemsgroup.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Using Elecraft KPA-1500 for 2
is no problem.
The W6PQL splitter/combiner are the units he makes for his two pallet amplifier
kit. So they are being used well below the designed power level.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Bob McGraw K4TAX
Sent: Tuesday
. This allows a single K3 to drive both amps to
full output even on 10 meters.
Connect inputs to the splitter, outputs to the combiner using (obviously) equal
length coax to main phase relationship.
Some assembly required but not rocket science.
Ken K6MR
From
“Actually, I suppose one could drive 2 KPA500's
from one K3 and sum the output for a virtual KPA1000.”
Yes you can. I have been doing this for the last 3 years.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Fred Jensen
Sent: Tuesday
What we call a “foot switch” is a “sustain pedal” in guitar speak (the real
market). The standard is a 1/4” plug. Buy an adapter.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Michael Gillen via Elecraft
Sent: Tuesday, April 16, 2019 6:05
True. However, the advantage of the K3/KAT500 (assuming you have the AuxBus
connected) is that the KAT500 will follow the K3 frequency without
transmitting. KPA1500 tuner does the same thing.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf
Windows 10 allows you to delay updates for up to 35 days.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Jim Brown
Sent: Thursday, June 20, 2019 12:16:53 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] new computers, the search
The B VFO doesn’t do anything in diversity receive. Both receivers are driven
by the A synth. B VFO is only used for a split transmit frequency if you want.
You are thinking of the VFO LINK mode where B follows A with a given split.
Ken K6MR
From
Use the command line options in a batch file. The options are COM Baud Port
timeout. Something like:
start KAT500-Remote.exe COM13 38400 4629 2000
start KPA500-Remote.exe COM11 38400 4627 2000
Insert your appropriate values.
Ken K6MR
From
is way too short for anything other than a
standalone PC. Putting one into a high quality, specialized
instrument/radio/whatever makes no sense at all.
Ken K6MR (retired PE)
From: elecraft-boun...@mailman.qth.net on
behalf of Bryan Brauer
Sent: Monday, May 6
and the amps were remoted in a closet 20 feet from
the operating desk. No problems.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Bob McGraw K4TAX
Sent: Tuesday, August 20, 2019 12:59:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft
“We need a splitter/breakout device.”
N6TV’s Y Box.
From: elecraft-boun...@mailman.qth.net on
behalf of Randy (Art)
Sent: Monday, August 26, 2019 12:12:05 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] kpa 1500
Pete that would be in k3 test mode.
does make a bit of fan noise on RTTY when dual CQing, but otherwise
works just fine. I have the amp in a closet so the noise is not a concern.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of j...@kk9a.com
Sent: Friday, June 28, 2019 7:04:10 AM
I pulled mine out a while back to understand the fan circuit and it’s pretty
obvious. Just make a diagram of the connectors so you don’t accidentally swap
one.
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of eric norris via Elecraft
Sent
I think you are looking for the Tx line out monitor level. LIN OUT (from
Config menu) and press 2. 0 should give you no monitor output.
Ken K6MR
From: K9MA<mailto:k...@sdellington.us>
Sent: Sunday, November 17, 2019 14:29
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net
Not sure what you mean by “multi TX contest environment”, but I use mine in a
SO2R setup. Two K3s into the single KPA1500. Works just fine. It’s in the
closet and I hardly ever touch it. It just keeps making watts.
Ken K6MR
From: Salvatore Ted K2QMF<mailto:k2...@juno.com>
Sent: Sa
Yep, we’ve all received our text message, email, and phone call. They are
taking no chances.
My generator is fueled and ready :^)
Ken K6MR
From: elecraft-boun...@mailman.qth.net on
behalf of Ken G Kopp
Sent: Monday, October 7, 2019 2:33:29 PM
Cc
1 - 100 of 143 matches
Mail list logo
