>
> > To: emc-users@lists.sourceforge.net
> > Cc:
> > Bcc:
> > Date: Thu, 18 Nov 2021 18:40:59 -0500
> > Subject: Re: [Emc-users] Spindle setup for 5i25/7i76
> >
> > On Thursday 18 November 2021 17:57:19 Alan Condit wrote:
> > > I built a new
Re: [Emc-users] Spindle setup for 5i25/7i76
> On Thursday 18 November 2021 17:57:19 Alan Condit wrote:
>
> > I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I
> > thought I had everything working but I still can’t get the spindle
> > working correctly. I have
On Thursday 18 November 2021 17:57:19 Alan Condit wrote:
> I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I
> thought I had everything working but I still can’t get the spindle
> working correctly. I have a 1.5hp PMDC treadmill motor that I am
> controlling with a
On Thursday 18 November 2021 17:57:19 Alan Condit wrote:
> I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I
> thought I had everything working but I still can’t get the spindle
> working correctly. I have a 1.5hp PMDC treadmill motor that I am
> controlling with a
I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I thought I
had everything working but I still can’t get the spindle working correctly.
I have a 1.5hp PMDC treadmill motor that I am controlling with a Cycletrol-150
DC controller. The am using the analog out from the 7i76 to
On Mon, 13 Sept 2021 at 22:54, Alan Condit wrote:
> I have the Cycletrol-150 Manual. It says that you can replace the 5k ohm
> potentiometer with a 0-10v analog signal. The 7i76 manual says that you can
> use it to replace a 5k potentiometer control (0-10v). So that should work and
> indeed
On Monday 13 September 2021 18:20:17 Alan Condit wrote:
> Update, I found some old photos of the motor’s id plate. I thought it
> was rated at 6000 rpm at 110 volts, but it was really only 3000rpm at
> 110volts. When I adjusted the maximum rpm in PNCConf, suddenly I was
> getting a solid “At
Update, I found some old photos of the motor’s id plate. I thought it was rated
at 6000 rpm at 110 volts, but it was really only 3000rpm at 110volts. When I
adjusted the maximum rpm in PNCConf, suddenly I was getting a solid “At Speed”
indicator.
John,
I will still try measuring the analog
On Monday 13 September 2021 16:51:42 Alan Condit wrote:
> John, Peter and Gene,
>
> I have the Cycletrol-150 Manual. It says that you can replace the 5k
> ohm potentiometer with a 0-10v analog signal. The 7i76 manual says
> that you can use it to replace a 5k potentiometer control (0-10v). So
>
add a 10uF 16V capacitor
across it. Then see if the voltage level changes from 0V to 10V.
Baby steps...
John
> -Original Message-
> From: Alan Condit [mailto:condit.a...@gmail.com]
> Sent: September-13-21 1:52 PM
> To: Emc-users@lists.sourceforge.net
> Subject: Re: [Emc
John, Peter and Gene,
I have the Cycletrol-150 Manual. It says that you can replace the 5k ohm
potentiometer with a 0-10v analog signal. The 7i76 manual says that you can use
it to replace a 5k potentiometer control (0-10v). So that should work and
indeed seems to be working. I have tried
On Sunday 12 September 2021 17:49:43 Alan Condit wrote:
> I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I
> thought I had everything working but I still can’t get the spindle
> working correctly. I have a 1.5hp PMDC treadmill motor that I am
> controlling with a
On Sun, 12 Sep 2021, Alan Condit wrote:
Date: Sun, 12 Sep 2021 16:49:43 -0500
From: Alan Condit
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Emc-users@lists.sourceforge.net"
Subject: [Emc-users] Spindle setup for 5i25/7i76
I built a new controller for
Hi Alan,
> From: Alan Condit [mailto:condit.a...@gmail.com]
> I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I thought
> I had everything working but I still can�t get the spindle
> working correctly.
> I have a 1.5hp PMDC treadmill motor that I am controlling with a
>
I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I thought I
had everything working but I still can’t get the spindle working correctly.
I have a 1.5hp PMDC treadmill motor that I am controlling with a Cycletrol-150
DC controller. The am using the analog out from the 7i76 to
15 matches
Mail list logo