requirements.
These kind of petty bureaucrats like to wield power that isn't theirs
to wield. Don't let them intimidate you. Since you surely don't
report to them, enlist your manager to support you if need be, but
don't waste your valuable time spinning wheels.
Dennis Brunnenmeyer
Leah...
Try including $paranum in the appropriate location in the
cross-reference definitions and the index reference page formats.
Dennis Brunnenmeyer
**
At 12:39 AM 1/30/2008, Leah Smaller wrote:
Good day to all,
The procedure titles in our doucmentation all being
this key sequence, one
key at a time: Esc, m, p.
Cheers...
Dennis Brunnenmeyer
At 01:53 PM 2/1/2008, Pete Rourke wrote:
Here is another newbie question.
FM8 - XP (importing into anchored frames)
I am using Snagit (default image
which should be avoided.
Dennis Brunnenmeyer
**
At 09:13 AM 1/24/2008, Charles Beck wrote:
I don't know about a list, but they are easily obtainable by opening the
Character Map utility that comes with all versions of Windows. After
understand this.
Dennis Brunnenmeyer
***
At 09:09 AM 2/5/2008, David Creamer wrote:
How can SnagIt capture an image at a higher resolution than what the screen
is set to? A 20 screen at 1280 x 1024, for example
David...
This was not an attack on you. Please see my remarks embedded below.
Dennis...
At 02:07 PM 2/5/2008, you wrote:
On Dennis Brunnenmeyer at [EMAIL PROTECTED] wrote on 2/5/08 11:36
AM:
Rant begins...
snip
when it
is a little strong. Life is too short, take a deep breath and enjoy!!
Rick
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dennis Brunnenmeyer
Sent: Tuesday, February 05, 2008 2:37 PM
To: David Creamer; framers@lists.frameusers.com
Subject: RE
if the alphabets and characters are significantly different.
Dennis Brunnenmeyer
***
At 01:51 PM 2/14/2008, Lin Surasky wrote:
Thanks, Art. I'm looking into that now. I see several sites have cost
estimates, but no one has a time estimate (i.e., x many hours per page
or per word
/options/framers/dennisb%40chronometrics.com
Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax
a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com
Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE
in-line in the main flow, say Flow A, in the target document?
Dennis Brunnenmeyer
**
At 12:31 PM 5/2/2008, Fred Ridder wrote:
N. Jain asked:
I am learning FrameMaker 7.1. I have many times coming across
posts mentioning text insets. I am confused. What
. Try it.
At 01:05 PM 5/2/2008, Jeremy H. Griffith wrote:
BTW: does anyone know of a similar utility that can pull graphics out of MS
Word documents?
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax
not have the originals, this seemed like manna
from heaven.
Dennis...
At 05:24 PM 5/2/2008, Jeremy H. Griffith wrote:
On Fri, 02 May 2008 13:45:07 -0700, Dennis Brunnenmeyer
[EMAIL PROTECTED] wrote:
As far as I know, the previous suggestion
that
require a reader to jump back and forth too many times in order to
assimilate a train of thought that ought to be presented in a linear
fashion. Just because you can do it doesn't mean it's the right thing to do.
Dennis Brunnenmeyer
Cedar Ridge Systems
. If the
graphics card setting does not match the native resolution of the
monitor, aliasing artifacts in the viewed image can cause greater
legibility issues with fonts, especially small ones.
Dennis Brunnenmeyer
Cedar Ridge Systems.
*
At 12
In a very recent post, I included an unfortunate typographical error.
The sentence below has been corrected.
Dennis...
***
At 12:41 PM 5/12/2008, Dennis Brunnenmeyer wrote:
The electron beam in a CRT cannot
quality displays, I suspect the opposite.
Amazon's Kindle apparently uses both serif and sans serif fonts.
Dennis...
At 03:30 PM 5/12/2008, Dennis Brunnenmeyer wrote:
In a very recent post, I included
://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com
Send administrative questions to [EMAIL PROTECTED] Visit
http://www.frameusers.com/ for more resources and info.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office
that replies go the list. Framers is the odd one out.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax: (530) 477-9085
Mobile: (530) 320-9025
eMail: dennisb /at/ chronometrics /dot/ com
PROTECTED]
From: FOLKDJ-L [EMAIL PROTECTED]
Subject: FOLKDJ-L - 19 May 2008 - Special issue (#2008-427)
To: [EMAIL PROTECTED]
Note that a Reply to any message in the digest is a Reply to the list.
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass
often found text from diagrams had shifted or was
missing altogether. *.emf files were better but not better enough.
I use Illustrator instead.
Dennis Brunnenmeyer...
*
At 11:50 AM 5/29/2008, Milan Davidovic wrote:
On Thu, May 29, 2008 at 2:44 PM, Art Campbell [EMAIL
Aravind...
Consider using the free plug-in called refIcons for this sort of
thing. It's available here. Be sure to get the CudSpanDocs.pdf file
as well. Once installed and set up, it should do exactly what you
want every time.
http://www.freeframers.org/freeware/cud/
Dennis Brunnenmeyer
At 12:34 PM 6/7/2008, Jeremy H. Griffith wrote:
For screenshots,
use the same resolution at which they were taken, 96DPI; more or
less will result in unreadable text.
Where does the 96DPI figure come from?
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019
community. I guess that must not have happened, but
before you sink money into a VISTA-only machine, I'd double-check the
validity of that rumor.
Dennis Brunnenmeyer
***
At 06:51 AM 6/19/2008, Rene Stephenson wrote:
Hi All,
My PC laptop is beaten up so badly it's barely stable
value with respect to salaries and time.
Dennis Brunnenmeyer
***
At 01:06 PM 6/19/2008, Rene Stephenson wrote:
You're right, Dennis. I checked with an IT guru buddy who has done a
lot of reworks of Vista machines when his clients got bitten by one
of its bugs
and forth.
Dennis Brunnenmeyer
At 06:51 PM 9/4/2008, Dave Reynolds wrote:
Hi
Not exactly Frame related, but I'm after some advice about LCD
monitors. After being the only tech writer in our team with a single
monitor, I finally got given another
Use RefIcons by Cudspan.
At 03:18 AM 1/4/2009, Leah wrote:
FM 7.0 ; Windows XP
In one of our products, users can choose between 2 programming syntaxes.
Until now we have produced 2 different versions of the Reference Guide
(using conditional text).
We now want to
Adrianne
What application you were using to create your PDF files from the DWG
files in the first place? I've never had a problem with PDFs created
from CAD packages using the Adobe PDF virtual printer installed with Frame.
Dennis Brunnenmeyer
At 05:44 AM 1
the best results.
Dual displays are really the only way to go if you have the desk space to
put two of them side-by-side. Once you start using them, you'll wonder why
you didn't do it sooner.
Dennis Brunnenmeyer
Cedar Ridge Systems
Grass Valley, CA
all,
have been doing
Use RefIcons by Cudspan.
At 03:18 AM 1/4/2009, Leah wrote:
>FM 7.0 ; Windows XP
>
>In one of our products, users can choose between 2 programming syntaxes.
>Until now we have produced 2 different versions of the Reference Guide
>(using conditional text).
>
>We now want
Adrianne
What application you were using to create your PDF files from the DWG
files in the first place? I've never had a problem with PDFs created
from CAD packages using the Adobe PDF virtual printer installed with Frame.
Dennis Brunnenmeyer
At 05:44 AM 1
be one or two years (or more) before you consider yourself a guru.
Once you understand the basic concepts, you'll find that the basic
features are very intuitive and logical.
Dennis Brunnenmeyer
Cedar Ridge Systems
***
At 02:17 PM 4/29
nd execute this key sequence, one
key at a time: Esc, m, p.
Cheers...
Dennis Brunnenmeyer
At 01:53 PM 2/1/2008, Pete Rourke wrote:
>Here is another newbie question.
>
>
>
>FM8 - XP (importing into anchored frames)
which should be avoided.
Dennis Brunnenmeyer
**
At 09:13 AM 1/24/2008, Charles Beck wrote:
>I don't know about a list, but they are easily obtainable by opening the
>Character Map utility that comes with all versions of Windows.
80/16 = 80 dpi.
End of rant ...
Flame away...but be sure you know what you are talking about and quit
misleading others if you don't understand this.
Dennis Brunnenmeyer
***
At 09:09 AM 2/5/2008, David Creamer
David...
This was not an attack on you. Please see my remarks embedded below.
Dennis...
At 02:07 PM 2/5/2008, you wrote:
>On Dennis Brunnenmeyer at dennisb at chronometrics.com wrote on 2/5/08 11:36
>AM:
>
seem to understand what you are talking about when it"
>is a little strong. Life is too short, take a deep breath and enjoy!!
>Rick
>
>-Original Message-
>From: framers-bounces at lists.frameusers.com
>[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Den
if the alphabets and characters are significantly different.
Dennis Brunnenmeyer
***
At 01:51 PM 2/14/2008, Lin Surasky wrote:
>Thanks, Art. I'm looking into that now. I see several sites have cost
>estimates, but no one has a time estimate (i.e., x many hours per page
&
cribed to Framers as dennisb at chronometrics.com.
>
>Send list messages to framers at lists.frameusers.com.
>
>To unsubscribe send a blank email to
>framers-unsubscribe at lists.frameusers.com
>or visit
>http://lists.frameusers.com/mailman/options/framers/dennisb%40chrono
requirements.
These kind of petty bureaucrats like to wield power that isn't theirs
to wield. Don't let them intimidate you. Since you surely don't
report to them, enlist your manager to support you if need be, but
don't waste your valuable time spinning wheels.
Dennis Brunnenmeyer
Leah...
Try including <$paranum> in the appropriate location in the
cross-reference definitions and the index reference page formats.
Dennis Brunnenmeyer
**
At 12:39 AM 1/30/2008, Leah Smaller wrote:
>Good day to all,
>
>The procedure titles in our do
At 12:34 PM 6/7/2008, Jeremy H. Griffith wrote:
>For screenshots,
>use the same resolution at which they were taken, 96DPI; more or
>less will result in unreadable text.
Where does the "96DPI" figure come from?
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDAR
community. I guess that must not have happened, but
before you sink money into a VISTA-only machine, I'd double-check the
validity of that rumor.
Dennis Brunnenmeyer
***
At 06:51 AM 6/19/2008, Rene Stephenson wrote:
>Hi All,
>
>My PC laptop is beaten up so badly it's bare
u consider its value with respect to salaries and time.
Dennis Brunnenmeyer
***
At 01:06 PM 6/19/2008, Rene Stephenson wrote:
>You're right, Dennis. I checked with an IT guru buddy who has done a
>lot of reworks of Vista machines when his clients got bitten
p://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com
>
>Send administrative questions to listadmin at frameusers.com. Visit
>http://www.frameusers.com/ for more resources and info.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax: (530) 477-9085
Mobile: (530) 320-9025
eMail: dennisb /at/ chronometrics /dot/ com
in-line in the main flow, say Flow A, in the target document?
Dennis Brunnenmeyer
**
At 12:31 PM 5/2/2008, Fred Ridder wrote:
>N. Jain asked:
>
> > I am learning FrameMaker 7.1. I have many times coming across
> posts mentioning text insets
. Try it.
At 01:05 PM 5/2/2008, Jeremy H. Griffith wrote:
> >BTW: does anyone know of a similar utility that can pull graphics out of MS
> >Word documents?
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530)
not have the originals, this seemed like manna
from heaven.
Dennis...
At 05:24 PM 5/2/2008, Jeremy H. Griffith wrote:
>On Fri, 02 May 2008 13:45:07 -0700, Dennis Brunnenmeyer
> wrote:
>
> >As far as I know, the previous sugge
references that
require a reader to jump back and forth too many times in order to
assimilate a train of thought that ought to be presented in a linear
fashion. Just because you can do it doesn't mean it's the right thing to do.
Dennis Brunnenmeyer
Cedar Rid
tion of the graphics adapter. If the
graphics card setting does not match the native resolution of the
monitor, aliasing artifacts in the viewed image can cause greater
legibility issues with fonts, especially small ones.
Dennis Brunnenmeyer
In a very recent post, I included an unfortunate typographical error.
The sentence below has been corrected.
Dennis...
***
At 12:41 PM 5/12/2008, Dennis Brunnenmeyer wrote:
>The electron beam in a CRT can
>
>To unsubscribe send a blank email to
>framers-unsubscribe at lists.frameusers.com
>or visit
>http://lists.frameusers.com/mailman/options/framers/dennisb%40chronometrics.com
>
>Send administrative questions to listadmin at frameusers.com. Visit
>http://www.frameusers.com/ for more resources and info.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax: (530) 477-9085
Mobile: (530) 320-9025
eMail: dennisb /at/ chronometrics /dot/ com
nd, and you won't.
>
>I'm currently on eight lists. Seven of them add a Reply-To field so
>that replies go the list. Framers is the odd one out.
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valley, CA 95945-8710
Office: (530) 477-9015
Fax: (530) 477-9085
Mobile: (530) 320-9025
eMail: dennisb /at/ chronometrics /dot/ com
J-L <lists...@lists.psu.edu>
Subject: FOLKDJ-L - 19 May 2008 - Special issue (#2008-427)
To: FOLKDJ-L at LISTS.PSU.EDU
Note that a Reply to any message in the digest is a Reply to the list.
Dennis...
Dennis Brunnenmeyer
Director of Engineering
CEDAR RIDGE SYSTEMS
15019 Rattlesnake Road
Grass Valle
since, but I often found text from diagrams had shifted or was
missing altogether. *.emf files were better but not better enough.
I use Illustrator instead.
Dennis Brunnenmeyer...
*
At 11:50 AM 5/29/2008, Milan Davidovic wrote:
>On Thu, May 29, 2008 at 2:44 P
Aravind...
Consider using the free plug-in called refIcons for this sort of
thing. It's available here. Be sure to get the CudSpanDocs.pdf file
as well. Once installed and set up, it should do exactly what you
want every time.
http://www.freeframers.org/freeware/cud/
Dennis Brunnenmeyer
imple to switch back and forth.
Dennis Brunnenmeyer
At 06:51 PM 9/4/2008, Dave Reynolds wrote:
>Hi
>
>Not exactly Frame related, but I'm after some advice about LCD
>monitors. After being the only tech writer in our team with a single
&g
f you want the best results.
Dual displays are really the only way to go if you have the desk space to
put two of them side-by-side. Once you start using them, you'll wonder why
you didn't do it sooner.
Dennis Brunnenmeyer
Cedar Ridge Systems
Grass Valley, CA
> all,
@lists.frameusers.com]
On Behalf Of Dennis Brunnenmeyer
Sent: Tuesday, November 22, 2016 8:28 PM
To: Craig, Alison; FramMaker Postings
Subject: Re: [Framers] A FrameMaker bug or is something wrong with my files?
It was something to do with the file itself. The problem followed the chapter
in question when I
rs.com]
*On Behalf Of *Dennis Brunnenmeyer
*Sent:* Tuesday, November 22, 2016 3:32 PM
*To:* FramMaker Postings
*Subject:* [Framers] A FrameMaker bug or is something wrong with my files?
OS: Windows 7 Professional, 64-bit
FrameMaker 7.2
Semi-knowledgeable, infrequent user
I've managed to generate an oth
advice.
Dennis...
--
Dennis Brunnenmeyer
Director of Marketing
*Fullfidelity Music^®*
15019 Rattlesnake Road
Grass Valley, CA 95945**
dennisb/at/ fullfidelitymusic /dot/ com
+1 (530) 477-9015
___
This message is from the Framers mailing list
Send
with consistent
paragraph and character formats. Yet when I go to update the book to
hopefully generate a TOC, there are no entries in the Generate and Don't
Generate windows.
Does anyone have any idea why this might be the case?
TIA for any suggestions.
Dennis
--
Dennis Brunnenmeyer
From: Framers [mailto:framers-bounces+wreng=tycoint@lists.frameusers.com]
On Behalf Of Dennis Brunnenmeyer
Sent: Tuesday, November 22, 2016 7:17 AM
To: FramMaker Postings
Subject: [Framers] Unable to generate a TOC
OS: Windows 7 Professional, 64-bit
Program: FrameMaker 7.2
User: Struggli
40lists.frameusers.com/>
www.mail-archive.com
Messages by Thread [Framers] A FrameMaker bug or is something wrong with my
files? Dennis Brunnenmeyer. Re: [Framers] A FrameMaker bug or is something
wrong with my ...
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/fram
FrameMaker 7.2, Unstructured
Windows 7 Professional, 64-bit
Target output: PDF only
As a relatively new beginner, I hate to bother experts with this
question, but where can I find concise information about the topics
below. I have the original Adobe 7.0 book as well as their Classroom In
A
Hello Z...
Thanks for your warning about the Control-key functions. I assume though
that it is still OK to access the paragraph and character designers with
the Ctrl+D and the Ctrl+M keystrokes. Is that true or should I rely on
the menus to open those designers?
Dennis...
It's not an evil suggestion, but I am under considerable pressure to meet a
critical deadline. I don't have the funds to upgrade nor the time to climb
yet another steep learning curve.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada
encountering this issue is my previous applications.
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Mon, May 15, 2017 at 6:42 PM, Robert Lauriston <
Windows 7 Professional, 64-bit.
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Mon, May 15, 2017 at 6:31 PM, Robert Lauriston <
is, well, deleted.
Is there a fix for this?
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
two cents in value but
readjusted for inflation.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Mon, Aug 28, 2017 at 5:20 PM, Robert
Why not just number your appendices rather than using characters from the
keyboard, like this:
Appendix 1: Specifications
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
Thanks everyone to all of you who responded, especially Fred Ridder, for
helping me with this. Turning off the 'Remember Missing Font Names' was the
easy solution to an otherwise annoying issue.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120
it easy to purge those two catalogs?
I apologize if I've overlooked something that should be obvious. Thanks in
advance for your help (again)!
Dennis
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m
ile was there, but his
> documentation no longer seems to be available. It was the documentation I
> was offering. I have it because I keep EVERYTHING. (My hard drive is where
> I hoard.) :)
>
> On Thu, Aug 9, 2018 at 4:38 PM, Dennis Brunnenmeyer <
> dennis.brunnenme...@gmail.
I did as you suggested, but neither Liberation Serif nor Times (by itself)
appeared anywhere in the file.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme
uld be appreciated. Thanks in advance.
Dennis..
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.
Once again, I thank everyone for your help with this. As it turns out, I
already had the two Silicon Prairie plug-ins AND the Cuspan tools from back
in the day. Now all I have to do is re-install them, review the
documentation and have a go at 'em.
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada
to solve my current issues. Maybe later ... ?
Dennis...
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p: (530) 477-9015
m: (530) 320-9025
dennis.brunnenme...@gmail.com
or
denn...@kvmr.org
On Thu, Aug 9, 2018 at 11:24 AM Lin
that old; they just didn't have all of the
features needed to support some of Windows 10's advanced graphics
capabilities.
Good luck. I hope it all works out for you.
--
Dennis Brunnenmeyer
Host | Nevada City Limits
KVMR-FM / KCPC-FM Radio / KVMR.org
120 Bridge Street
Nevada City, CA 95959
p
___
>
> This message is from the Framers mailing list
>
> Send messages to framers@lists.frameusers.com
> Visit the list's homepage at http://www.frameusers.com
> Archives located at
> http://www.mail-archive.com/framers%40lists.frameusers.com/
> Subscribe and uns
ns to listad...@frameusers.com
> ___
>
> This message is from the Framers mailing list
>
> Send messages to framers@lists.frameusers.com Visit the list's homepage
> at http://www.frameusers.com Archives located at
> http://www.ma
82 matches
Mail list logo
