he MS Mouse/Mac software, and I
don't see anything in the System Preferences Mouse/Trackpad or MS Mouse control
panels, or in the applications or utilities folders.
Any suggestions?
Regards,
Peter Gold
KnowHow ProServices
c.
I probably need to install the MS Mouse software under Classic or
restart in 9.22 and install it, then go back to OS X and Classic.
Thanks, again.
Regards,
Peter Gold
KnowHow ProServices
At 12:31 PM 7/19/2006, Steve Rickaby wrote:
>At 13:11 -0400 19/7/06, Peter Gold wrote:
>
> &g
$pagenum>
Regards,
Peter Gold
KnowHow ProServices
ete. Continuous authoring and editing is more
FrameMaker's strength, especially for x-refs, and complex numbering
that change frequently up to the final editing pass before handing
off for reproduction or distribution.
____
Regards,
Peter Gold
KnowHow ProServices
At 12:02 PM -0
final layout with little pain.
My point simply is that it's important to have the whole picture.
____
Regards,
Peter Gold
KnowHow ProServices
At 1:29 PM -0400 6/5/06, Ann Zdunczyk wrote:
>LOL you guys are speaking to the Choir I have been a LONG time
>FrameMaker u
Hi, Morgan:
InDesign doesn't recognize FrameMaker's MIF export; not many programs do.
However, your suggestion reminded me that dtptools is working on a
MIF->ID conversion tool and service. Contact: "Jan Macuch"
____
Regards,
Peter Gold
KnowHow ProServices
lder - to open the help system quickly,
independent of FrameMaker being open.
>BTW, anyone with Acrobat can convert a web help system into a single
>PDF (through File > Create PDF > From Web Page, pointing to the help
>main menu page).
Regards,
Peter Gold
KnowHow ProServices
round properties may be affecting the body page text.
HTH
Regards,
Peter Gold
KnowHow ProServices
for bullet, and read the topic Formatting
text as bulleted lists.
Also, search sGoogle for framemaker custom bullet
--
Regards,
Peter Gold
KnowHow ProServices
mbering Properties for Chapter 1 each time I publish version of the
>book.
>
>>From my perspective, I could solve this if my company changed its
>numbering standard to restart numbering on the first page of Chapter 1.
>Unfortunately, that is not an option.
>
>>From FM's perspective, FM could solve this if the format (roman vs.
>arabic) was not connected to restarting the page numbering, that is, you
>shouldn't only get to change the format if you are restarting, you
>should also get to change it if you are continuing.
--
Regards,
Peter Gold
KnowHow ProServices
o well, you'd expect
it. Again, perhaps this is a change from pre-release 7.x; anyone care
to test and report?
--
Regards,
Peter Gold
KnowHow ProServices
t;with the paragraph designer, only the character designer. When I try to
>use the paragraph designer, it says, "No Insertion point" even though I
>have the text highlighted.
--
Regards,
Peter Gold
KnowHow ProServices
:
>509
>5104
>5105
>5115
>512
>5120
Have you considered creating and maintaining the table in a
spreadsheet application like Excel, and importing it, either
directly, or by exporting from the spreadsheet as delimited text and
importing the text?
--
Regards,
Peter Gold
KnowHow ProServices
ht I'd search the archives first, but the one I found at the
>frameusers site was just for the recent few months.
I don't know about the archives, but you can find lots of hits from
many relevant lists with Google searches that include the problem or
message and FrameMaker.
--
Regards,
Peter Gold
KnowHow ProServices
#x27;re saving your AI files as EPS, you may be doing an
unnecessarily extra step. FM can import AI files directly.
>I'm still curious why this happens, but for the practical matter at hand,
>we decided to use 0.21 pts for minimum line width in our graphics.
Probably the simplest solution.
"Reformat as plain text")
> Once the file is inserted, copy that text, and then search &
>replace by pasting.
>
>Advantage to #1: simple.
>Advantage to #2: changing the link on the reference page will change it
>for all instances.
--
Regards,
Peter Gold
KnowHow ProServices
age range feature doesn't work. Does anybody have any experience
>with this?
>
--
Regards,
Peter Gold
KnowHow ProServices
al cross-platform keystrokes; tap each key in
sequence and release:
Esc s C displays Special Conditional Text palette - NOTE lowercase s
uppercase C
Esc v C displays Show/Hide Conditional Text dialog box - Note
lowercase v uppercase C.
--
Regards,
Peter Gold
KnowHow ProServices
d file, you can open both in the structured
interface and compare the edited one to the original with File >
Utilities > Compare Documents, and transfer the edits to the
structured file. MAKE A SAFETY COPY of the structured original before
proceeding!
HTH
____
Regards,
Pete
ch or two.
ljk
___
Deja Moo: The feeling that you've heard this bull before.
This is how I usually feel about criticisms of something for being
"non-intuitive," when it's really "not familiar."
of distribution, this
kind of uniform standard is necessary.
Only "a billion pages?" HA! Soon it will be "billions and
billions..." Remember when McDonald's signs bragged about millions
served?
____
Regards,
Peter
Citing your reviewers' confusion is a good approach - it's about
usability and clarity, not page layout or personal preference.
You might have a good alternate tool in the Table Sheet variable,
which identifies each table sheet (page), even the first.
___
om a
book window, with some or all files selected, import works from one
file to all selected files.
* TIP * There's no undo, but if you import into opened and saved
files, you can revert them if the result isn't correct.
HTH
Regards,
Peter Gold
KnowHow ProServic
a
paragraph as frame below/above
* look up the fraction bar and use it instead of the backslash
HTH
Regards,
Peter Gold
KnowHow ProServices
At 10:06 AM -0600 5/25/06, Linda G. Gallagher wrote:
Framers,
I hope someone has an idea on this. I've narrowed down a cra
Hi, Linda:
OOOPS!
* look up the fraction bar and use it instead of the backslash
I got the wrong "slant" on this. The fraction leans forward.
HTH
Regards,
Peter Gold
KnowHow ProServices
At 10:06 AM -0600 5/25/06, Linda G. Gallagher wrote:
Framers,
I hope some
graphic; tag it with your standard caption paragraph format.
* Point cross-references in text to the white caption paragraph.
HTH
Regards,
Peter Gold
KnowHow ProServices
At 8:16 AM -0700 5/30/06, Don and Judy wrote:
Greetings, all:
I have discovered a problem when generating
y not be a
workable approach.
* Don't hide the caption's condition, or the bottom-caption x-ref
fails to find the top white caption.
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as
this:
\t <$pagenum>
____
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.fram
arly complete. Continuous authoring and editing is more
FrameMaker's strength, especially for x-refs, and complex numbering
that change frequently up to the final editing pass before handing
off for reproduction or distribution.
____
Regards,
Peter Gold
KnowHow ProServices
At 12:02
final layout with little pain.
My point simply is that it's important to have the whole picture.
____
Regards,
Peter Gold
KnowHow ProServices
At 1:29 PM -0400 6/5/06, Ann Zdunczyk wrote:
LOL you guys are speaking to the Choir I have been a LONG time
FrameMaker user. S
Hi, Morgan:
InDesign doesn't recognize FrameMaker's MIF export; not many programs do.
However, your suggestion reminded me that dtptools is working on a
MIF->ID conversion tool and service. Contact: "Jan Macuch"
<[EMAIL PROTECTED]>
____
Regards,
P
the help system quickly,
independent of FrameMaker being open.
BTW, anyone with Acrobat can convert a web help system into a single
PDF (through File > Create PDF > From Web Page, pointing to the help
main menu page).
____
Regards,
Peter Gol
body page text.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or v
he MS Mouse/Mac software, and I
don't see anything in the System Preferences Mouse/Trackpad or MS Mouse control
panels, or in the applications or utilities folders.
Any suggestions?
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subs
c.
I probably need to install the MS Mouse software under Classic or
restart in 9.22 and install it, then go back to OS X and Classic.
Thanks, again.
Regards,
Peter Gold
KnowHow ProServices
At 12:31 PM 7/19/2006, Steve Rickaby wrote:
At 13:11 -0400 19/7/06, Peter Gold wrote:
>I'
ds of your current project. Also, at least in 10.3.9, after you
type in the memory setting value, close the Info panel immediately, then
reopen it to make sure that your value is entered correctly. I've found
that it's easy to unintentionally delete what you've just entered.
FM.
HTH
Peter Gold
KnowHow ProServices
Bodvar Bjorgvinsson wrote:
Hi all.
I have earlier complained about problems with Character tags where
bold becomes bolded or bold does not work at all, so therefore I have
as much as possible tried in structured FM to use Characther change
format element
ord, if you can choose to use one that's
more pleasant and efficient to use?
Regards,
Peter Gold
KnowHow ProServices
[EMAIL PROTECTED] wrote:
Again, since there are so many veteran writers on this and who have
learned through the years to maneuver their way through the editing
proc
If you forget the codes to use in a dialog boxe, but you know how to
create the characters in text, you can copy them to the clipboard and
paste them into the dialog box with Ctrl/Cmd-V.
Regards,
Peter Gold
KnowHow ProServices
For a list of escape codes to use when typing special characters
managed for all uses
of the file(s). Conditional text and text insets may help you manage
these requirements; include them in the procedures you create.
HTH
____
Regards,
Peter Gold
KnowHow ProServices
Charles Beck wrote:
Hi Shmuel,
This is actually very easy and is one of
Hi, Fred:
You don't quote any error messages, so these are only guesswork, based
on experience:
* If you're using a watched folder, and the last time you viewed the PDF
file, it wasn't closed, Distiller can't create a new PDF of the same
name, so it refuses to create new .ps. If you change t
Hi, Scott:
In addition to the several proprietary database applications that can
manage this, you might want to search for "Database Publishing" in
"MIF_Reference.pdf" in the OnlineManuals directory of your FrameMaker
installation.
HTH
________
Regards,
Hi, Klaus:
Do you see any messages when you try to open the file?
FrameMaker 7.x can read FrameMaker files as far back as 4.x, I believe.
Your file may be corrupted. One technique that might help is called
"OpenHeroic." This bypasses FrameMaker's validation checks that are
usually performed w
see.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.fram
File dialog box.
If you have a large volume of files on obsolete media, you may want to
search Google for data-recovery services, or perhaps search for
equipment that can read your media. It may be possible that the old
media have deterioriated or have been damaged in storage.
HTH
________
ss with the
font size, but leaves it alone? I'm stumped on this one... What am I
missing?
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMA
Hi, Linda:
Make it double sided with Format > Page Layout > Pagination (working
from memory - no FM available at the moment).
HTH
Peter Gold
KnowHow ProServices
Linda G. Gallagher wrote:
Framers,
Well, I'm stuck. I'm creating a new template for a project and started with
Hi, Gillian:
Did you ever try applying FM callouts - as text frames or text lines -
to the imported graphics? This gives the option to use the best drawing
tools for the purpose, and still permits translators to stay in FM.
Regards,
Peter Gold
KnowHow ProServices
Gillian Flato wrote
Hi, Gillian:
Did you ever try applying FM callouts - as text frames or text lines -
to the imported graphics? This gives the option to use the best drawing
tools for the purpose, and still permits translators to stay in FM.
Regards,
Peter Gold
KnowHow ProServices
Gillian Flato wrote
created in the drawing
you've made in an anchored frame. You do the same thing with an imported
graphic in an anchored frame. You can group these text frames or text
lines with imported graphics.
HTH
Peter Gold
KnowHow ProServices
Gillian Flato
-----Original Message-
From:
n the
box without breaking the sealed shrinkwrap!
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED
hers also post their EULAs on their website
where people can do due diligence before purchasing.
Regards,
Peter Gold
KnowHow ProServices
-Original Message-----
From: Peter Gold [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 14, 2006 1:53 PM
To: Ridder, Fred
Cc: framers@frameusers.c
Because there are so many of these notes, I created an email filter to
trash them. My settings are:
Criteria:
* Date: 9/5/2006
and
* Sender or From: [EMAIL PROTECTED]
and
* Subject contains: [News
Actions:
* Mark as Junk
* Move to Junk folder
HTH
Regards,
Peter Gold
KnowHow ProServices
d imported graphic or graphics in single or straddled
heading/footing cells
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubs
27;s not clear what level of detail you need in your comparison, but you
might find that the options available for document comparison in Acrobat
Professional offer results that suit your needs better than FrameMaker's
File > Utilities > Compare Documents.
HTH
____
Rega
but don't use
magenta. FrameMaker reserves magenta for content that is tagged with two
or more conditions; the color isn't the result of any known rules of
color mixing, it's just arbitrary.
HTH
Regards,
Peter Gold
KnowHow ProServices
e the page on which it appears is
rotated. Tables can be edited.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe se
Peter Gold wrote:
* NOTE: THIS IS A CORRECTION TO MY EARLIER POST WHICH CONTAINED AN
ERROR *
* SEE BELOW FOR CORRECTION *
Apologies for any confusion.
Hi, Mathieu:
mathieu jacquet wrote:
Hi all,
a question about writing text in a table that has been turned
ow is
inserted (or deleted) and factor that into the comparison?
Have you tried converting the tables to text before comparing the documents?
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Frame
like 6, 5, etc?
* Have you tried not making the addresses as hyperlinks in FrameMaker,
and turning on the Acrobat (and Reader) 7.x preference to detect links?
Any difference?
HTH
Regards,
Peter Gold
KnowHow ProServices
Karen L. Zorn wrote:
FrameMaker 7.2
Acrobat Pro 7
tructed, rather than that Acrobat is failing to parse
them correctly?
Thanks all for the suggestions and help.
Sure! I'm always curious about new things that break.
____
Regards,
Peter Gold
KnowHow ProServices
___
You are currently s
Regards,
Peter Gold
KnowHow ProServices
Hi all,
I'm at the indexing stage of a 400 page book for a product I hadn't
worked with for about 3 years (so no memory of what I indexed before).
The manual has also been totally restructured, and many features
superseded by
, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
Other good sources are Google, and the Society for Technical
Communication site, stc.org.
HTH
Regards,
Pet
this.
You can read a lot about this (and other stuff) in David Pogue's
excellent and thorough "Mac OS X: The Missing Manual" (choose the cat
version you need.) There's not much he overlooks explaining about common
and obscure aspects of Mac-ing.
HTH
Regards,
This is a common request. Search Google for: framemaker "rotate page"
for postings that list the steps.
HTH
Regards,
Peter Gold
KnowHow ProServices
Texan Scriber wrote:
Fellow Framers,
Does anyone know how to have landscape and portrait pages in the same
Fram
directory-full of
PDFs. Check your Acrobat Help for Batch.
HTH
Regards,
Peter Gold
KnowHow ProServices
[EMAIL PROTECTED] wrote:
Hello All,
I'm not sure if this is caused by FM, or Acrobat, but I know we have
plenty of experts with both programs on this list, so I hope
ting? What results?
HTH
____
Regards,
Peter Gold
KnowHow ProServices
Tammy Van Boening wrote:
Oh yea - the other thing. The page size/margins on the body page of the
TOC look just fine, but when I open the reference page, the actual text
entry area is reduced significantly and the ma
Insets. For more information, search for
generated lists in FrameMaker Help.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTEC
address for enhancement requests to Adobe?
http://www.adobeforums.com/cgi-bin/webx/.1de6f27f
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL
Hi, Joaanne:
Define the Numbering attribute in the Basic Properties of the table
format in the table designer as Column First.
HTH
Regards,
Peter Gold
KnowHow ProServices
That Darned Writer wrote:
Hi Frame gurus... I may have known this but forgotten. I checked the
didn't recur.
HTH
____
Regards,
Peter Gold
KnowHow ProServices
John Pitt wrote:
Mark,
I wasn't absolutely certain that I had followed the correct procedure
as you outlined -- so I reinstalled, and checked for rogue traces of
old installations, etc., again.
But it is the same story.
Hi, Linda:
Have you inspected the failed links with the Link tool, to see if the
addresses are correctly formed?
HTH
Regards,
Peter Gold
KnowHow ProServices
Linda G. Gallagher wrote:
Framers,
FM 7.0
Acrobat Pro 6.0
I've used links to web sites before, but for some r
Tap and release these keys in sequence: Esc s c (lowercase matters), for
Special > Cross Reference. Navigate the dialog box to choose what you need.
HTH
Regards,
Peter Gold
KnowHow ProServices
Natalie Bircher wrote:
Is there a keyboard shortcut for inserting cross referen
program.
Yes, but FrameMaker's Escape key sequence commands work on all
FrameMaker platforms, Windows, Mac and UNIX. There are some users who
work in FrameMaker on more than one platform, so they only have to learn
one FrameMaker keystroke set.
Regards,
Peter Gold
Kn
rver-based files, or only on
local files, or no significant relation to either?
HTH
________
Regards,
Peter Gold
KnowHow ProServices
Torralba, Jing wrote:
Hi Fred,
I'm so glad you brought this subject up.
I found the same problem in some of the files I inherited from the
p
w what the manual says. I
need to know if there is a way to tweak FM system files to change these
settings.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send lis
Hi, Michael:
Search for
Globally applying formats to text
in FrameMaker's help.
HTH
Regards,
Peter Gold
KnowHow ProServices
Michael Zaichenko wrote:
Hello there,
Looking for a way to copy one property of a paragraph? like it's
spacebelow or keepwithnext? and paste it over to
illed
structure folks in the community who can help you when you get stuck.
I'm copying this to the list, for others to see, and perhaps comment upon.
Regards,
Peter Gold
KnowHow ProServices
Michael Zaichenko wrote:
Peter, thanks for such an extensive answer.
I took
://www.adobe.com/products/framemaker/tempseries/
HTH
Regards,
Peter Gold
KnowHow ProServices
At 20:21 -0800 28/1/07, Greg Thompson wrote:
I have decided to take the plunge into learning template design using Frame.
Any suggestions on books/tutorials to get out of the land
Look into the MIF-to-ID tool now in beta test phase from DTP Tools:
http://www.dtptools.com/product.asp?id=mfid
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list
etter?
* Is the real total cost of migrating from FrameMaker to some other
product worth the advantage(s) that it provides?
* Is there value in retaining FrameMaker in your workflow as you
incorporate some other product for its advantages?
HTH
Regards,
Peter Gold
KnowHow ProServices
Hi, Gordon:
Have you tried opening all the files in the book, then applying View >
Hide Element Boundaries, before generating the PDF?
HTH
Regards,
Peter Gold
KnowHow ProServices
Gordon McLean wrote:
Hi all,
Still finding my feet with Structured Framemaker.. is ther
When used
from a book window, the Open All, Save All, Close All, actions only work
on book files; when used from a non-book window, the Save All and Close
all work on all open files, book members or free-standing.
HTH
Regards,
Peter Gold
KnowHow ProServices
Gordon McLean
Search Google for: reficons cudspan
Reficons is one way to do it, and it's free.
There are also other free helpful FrameMaker tools at this great site.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subsc
return on your learning investment by having documents that
often require the kind of manual effort that's worth turning over to the
smart rules-inforcer, to gain efficiency.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
Y
Hi, Art:
A good test for any guideline would be to see if it's got a foolproof
rule about translating "y'all."
________
Regards,
Peter Gold
KnowHow ProServices
Art Campbell wrote:
Thanks for any guidance y'all can offer!
ck test should clarify the
behavior.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMA
Art Campbell wrote:
Paul,
I think you're breaking the rules of the conversation by applying
logic...
It's not about logic, it's about being a Mac fan.
So, Art, you don't think that Mac fanatacism trumps compulsive speculation?
Regards,
Peter Gold
requite one more
test to see that this works as required.
HTH
____
Regards,
Peter Gold
KnowHow ProServices
Combs, Richard wrote:
Peter Gold wrote:
Richard's point is excellent!
Thank you.
I believe that one way to avoid this problem is to create a
nam
.com might offer additional information.
HTH
Regards,
Peter Gold
KnowHow ProServices
Massimiliano Lodi wrote:
Hi Mike,
thanks for your interesting answer.
1. It sounds like you just need to create a user variable for each term
and insert the variables at the appropriat
e ell)
To select in a table:
NOTE: To get the best mnemonic value from these sequences, think of
"Highlight" rather than "Select"
! t h e (table highlight entry; that is, current cell)
! t h r (table highlight row)
! t h t (table highlight table)
HTH
Reg
e Graphics >
Runaround Properties dialog box.
HTH
____
Regards,
Peter Gold
KnowHow ProServices
David Schor wrote:
What is the keyboard shortcut for toggling open documents?
Thanks very much,
David
___
You are currently subscribed
l users have support contracts with the expectation that they'd
channel the support requests, then the original problem is only
distributed among them - the skilled users reduce their productivity
when supporting others.
Do the math first, build a model, then evaluate.
HTH
____
Reg
ven't experimented with the comment layers in InDesign...yet!
HTH
Regards,
Peter Gold
KnowHow ProServices
Art Campbell wrote:
I have a PDF in a FM file imported by reference. Although it contains
several comments (callouts, highlighting, etc.) they don't display in
FM.
column, perhaps the width of the
reference frame is bumping into the column and pseudo-wrapping to the
lower position.
Have you tried using an anchored frame below, with a rule, instead of
the reference frame, just to see if it's stable?
HTH
Regards,
Peter Gold
Kn
; pasting the format stops when you copy other
content to the clipboard.
If you need to apply the override to different paragraph formats, create
examples in a separate FrameMaker file, and copy special from it.
HTH
Regards,
Peter Gold
KnowHow ProServices
You wrote:
Dos
o fail, so perhaps that's not the issue.
HTH
Regards,
Peter Gold
KnowHow ProServices
Rene Stephenson wrote:
We have the same problem with 2 similar BlockLine paragraph tags that use 2 pt
font w/ 6 pt space above and paragraph below pointing to a line on the
reference page. B
tweaking is more effort.
* Dedicated paragraph format variations are GOOD for page-flow tweaking,
because they are stable and are proof against Remove Overrides actions.
One takes the road that leads to that inner peach that all technical
authors seek constantly.
____
Regards,
Peter G
no
whitespace gaps in the footnotes or the story's text.
There's a lot of formatting and layout control over footnotes. No table
footnotes, though. No x-refs to fake them, either.
Thanks for asking.
HTH
Regards,
Peter Gold
KnowHow ProServices
_
r Reader 7, so
users don't need full Acrobat.
HTH
Regards,
Peter Gold
KnowHow ProServices
At 11:35 -0400 18/4/07, Molly Keegan wrote:
I am wondering how others keep track of changes made to their books. I am
the only technical writer at my company, and we have a rig
601 - 700 of 1096 matches
Mail list logo