[Framers] Please remove me from list
REMOVE Stephen O'BRIEN Réviseur-rédacteur | Copy Editor-Copywriter InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 x265 [cid:image001.png@01D62CF2.F47AE1D0] AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le détruire et en aviser l'expéditeur. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 4676 bytes Desc: image001.png URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20200518/367f6fed/attachment.png> ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] Script for adding variables to FM
Hi, Did you get an answer? If not, in FrameScript or ExtendScript? And for what version of FM. Thx, Stephen O'BRIEN Rédacteur principal, marketing et communication | Senior Copywriter, Marketing and Communication InnovMetric Logiciels | Software T (1) 418.688.2061 x265 Ne manquez pas l'évènement PolyWorks Conference USA|2020 du 15-16 avril à Novi, MI. Don't miss the PolyWorks Conference USA|2020 on April 15-16 in Novi, MI. -Original Message- From: Framers On Behalf Of Martinek, Carla Sent: Wednesday, February 12, 2020 12:39 PM To: framers@lists.frameusers.com Subject: [Framers] Script for adding variables to FM Is anyone aware of a script for adding/creating variables from a list/table? Ideally, you'd have the variable on one column, and the values on the other. [Zebra_Logo_Stacked_K_small] Carla Martinek Manager, Technical Communications Printers and LS Products ZEBRA TECHNOLOGIES CORPORATION 3 Overlook Point Lincolnshire IL 60069 T: +1 331 300 0347 cmarti...@zebra.com<mailto:cmarti...@zebra.com> https://can01.safelinks.protection.outlook.com/?url=www.zebra.com&data=02%7C01%7Csobrien%40innovmetric.com%7Cdfb69fa991714a59724108d7afe27d09%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C637171259619968816&sdata=zjg3vlNTWvgQA67gtXhGhkH8ZjU2EE%2F07oMD%2FYeu7l4%3D&reserved=0<https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.zebra.com%2F&data=02%7C01%7Csobrien%40innovmetric.com%7Cdfb69fa991714a59724108d7afe27d09%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C637171259619968816&sdata=3DJS1PQ2l2%2BBLPU2Ihg6BztV%2BzS4NFBp2c0GBumHQcA%3D&reserved=0> - CONFIDENTIAL- This email and any files transmitted with it are confidential, and may also be legally privileged. If you are not the intended recipient, you may not review, use, copy, or distribute this message. If you receive this email in error, please notify the sender immediately by reply email and then delete this email. -- next part -- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 3867 bytes Desc: image001.png URL: <https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.frameusers.com%2Fpipermail%2Fframers-frameusers.com%2Fattachments%2F20200212%2F2ea8e487%2Fattachment.png&data=02%7C01%7Csobrien%40innovmetric.com%7Cdfb69fa991714a59724108d7afe27d09%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C637171259619968816&sdata=%2B4lkLWFkvESwyxJd%2Bi7gbuVtIzuTqpFWjTN4rpySY%2FA%3D&reserved=0> ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.frameusers.com&data=02%7C01%7Csobrien%40innovmetric.com%7Cdfb69fa991714a59724108d7afe27d09%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C637171259619978767&sdata=iE7sba85%2FBB6ye41i1tRCH65ptCl8wh4%2B8D0KlS1nG0%3D&reserved=0 Archives located at https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.mail-archive.com%2Fframers%2540lists.frameusers.com%2F&data=02%7C01%7Csobrien%40innovmetric.com%7Cdfb69fa991714a59724108d7afe27d09%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C637171259619978767&sdata=DVyi0JUuI6f0HHUb%2BGpscoQR13RnGRPZeI6ilb4dxwc%3D&reserved=0 Subscribe and unsubscribe at https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.frameusers.com%2Flistinfo.cgi%2Fframers-frameusers.com&data=02%7C01%7Csobrien%40innovmetric.com%7Cdfb69fa991714a59724108d7afe27d09%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C637171259619978767&sdata=xQmxN61HEVw9TOHQta05J5pAQAKJ%2FlEJZgDNcZlQI0I%3D&reserved=0 Send administrative questions to listad...@frameusers.com ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] External cross-references in book documents - do not work in generated PDFs
Thx Rick. That was very helpful! Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 -Message d'origine- De : Framers [mailto:framers-bounces+sobrien=innovmetric@lists.frameusers.com] De la part de Rick Quatro Envoyé : Monday, January 08, 2018 10:57 AM À : 'An email list for people using Adobe FrameMaker software.' Objet : Re: [Framers] External cross-references in book documents - do not work in generated PDFs Hi Stephen, Let's say you are producing a PDF from Book A. Book A has links to Book B. Book B has to be open in FrameMaker when you make the PDF from Book A in order for the links to Book B to work. Rick Rick Quatro Carmen Publishing Inc. r...@frameexpert.com 585-366-4017 -Original Message- From: Framers [mailto:framers-bounces+rick=rickquatro@lists.frameusers.com] On Behalf Of Stephen O'Brien Sent: Monday, January 08, 2018 10:50 AM To: Frame Users (framers@lists.frameusers.com) Subject: [Framers] External cross-references in book documents - do not work in generated PDFs Hi, I work with several FM (12) books. Some documents in these books contain external x-refs to sections in documents in other books. In the generated PDFs, these external x-refs do not work (do not open the destination PDF). Any suggestions? Many thanks, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 [cid:image001.gif@01D3886E.5DB1F480]<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.innovmetric.com%2F&data=02%7C01%7Csobrien%40innovmetric.com%7Cb07e355cd1d64b849a3308d556b06c16%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C636510238104585651&sdata=KmHpztACCYbraUykfyI9q2KWgnYf1HCY0QOmKSicQwg%3D&reserved=0> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le détruire et en aviser l'expéditeur. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- A non-text attachment was scrubbed... Name: image001.gif Type: image/gif Size: 4138 bytes Desc: image001.gif URL: <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.frameusers.com%2Fpipermail%2Fframers-frameusers.com%2Fattachments%2F20&data=02%7C01%7Csobrien%40innovmetric.com%7Cb07e355cd1d64b849a3308d556b06c16%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C636510238104585651&sdata=uqrA%2B9eLBKu5ftGxUfRIXFj2hv8lzCIGIfDayZkR3wA%3D&reserved=0 180108/eeb23b37/attachment.gif> ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.frameusers.com&data=02%7C01%7Csobrien%40innovmetric.com%7Cb07e355cd1d64b849a3308d556b06c16%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C636510238104585651&sdata=%2FtzCSvnGUi%2B1wr0RnO09RfZCQvvX677hJJ9CmsfGfcM%3D&reserved=0 Archives located at https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.mail-archive.com%2Fframers%2540lists.frameusers.com%2F&data=02%7C01%7Csobrien%40innovmetric.com%7Cb07e355cd1d64b849a3308d556b06c16%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C636510238104585651&sdata=bZk1rBkU6cN4J7aDcwODSo2%2FBH%2FvA60u%2FqCsV%2FdFFQ8%3D&reserved=0 Subscribe and unsubscribe at https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.frameusers.com%2Flistinfo.cgi%2Fframers-frameusers.com&data=02%7C01%7Csobrien%40innovmetric.com%7Cb07e355cd1d64b849a3308d556b06c16%7Ccce20258511746d09476282d4763f829%7C0%7C1%7C636510238104585651&sdata=lmisbGiUSTqD5rlXpuY4Ox9q%2FBOpBvqsHXE6Ij%2FOzwc%3D&reserved=0 Send administrative questions to listad...@frameusers.com
[Framers] External cross-references in book documents - do not work in generated PDFs
Hi, I work with several FM (12) books. Some documents in these books contain external x-refs to sections in documents in other books. In the generated PDFs, these external x-refs do not work (do not open the destination PDF). Any suggestions? Many thanks, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 [cid:image001.gif@01D3886E.5DB1F480]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le détruire et en aviser l'expéditeur. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- A non-text attachment was scrubbed... Name: image001.gif Type: image/gif Size: 4138 bytes Desc: image001.gif URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20180108/eeb23b37/attachment.gif> ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
[Framers] FrameScript & Combined fonts
Hi, I cannot find how to assign a CombinedFont to a paragraph format, like Body, using FrameScript. I appreciate any help you can give me. Thanks and have a good day, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 [cid:image001.gif@01D2C014.721D7DE0]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- A non-text attachment was scrubbed... Name: image001.gif Type: image/gif Size: 4138 bytes Desc: image001.gif URL: <http://lists.frameusers.com/pipermail/framers-frameusers.com/attachments/20170428/db74debb/attachment.gif> ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] Convert ALL text insets in All documents of a book automatically?
Hi Rick, This is exactly what I am looking for. I am looking forward to testing it. Thanks! Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 -Message d'origine- De : Rick Quatro [mailto:r...@rickquatro.com] Envoyé : Thursday, July 21, 2016 9:41 AM À : Stephen O'Brien; 'Frame Users' Objet : RE: [Framers] Convert ALL text insets in All documents of a book automatically? Hi Stephen, If you have FrameScript 6, you can use this code to convert all of the text insets in a document to text. It could be modified to work on all of the documents in a book. If you don't have FrameScript, I can look and see if a function like this is available in ExtendScript, which is built into FrameMaker 12. Please let me know if you have any questions or comments. Thank you very much. Rick Quatro Carmen Publishing Inc. 585-366-4017 r...@frameexpert.com Function FlattenTextInsets oDoc // Local oTi(0), iResult(0); // First, unlock all of the insets. Set oTi = oDoc.FirstTiInDoc; Loop While(oTi) Set oTi.TiLocked = 0; Set oTi = oTi.NextTiInDoc; EndLoop // Convert the text insets to text. Set oTi = oDoc.FirstTiInDoc; Loop While(oTi) Set iResult = eUtl.ConvertTiToText(oTi); Set oTi = oDoc.FirstTiInDoc; EndLoop // EndFunc // -Original Message- From: Framers [mailto:framers-bounces+rick=rickquatro@lists.frameusers.com] On Behalf Of Stephen O'Brien Sent: Thursday, July 21, 2016 9:28 AM To: Frame Users (framers@lists.frameusers.com) Subject: [Framers] Convert ALL text insets in All documents of a book automatically? Hi, I am using FM 12 and have several books with over 70 documents, all containing text insets. When I generate the monthly PDFs, I copy the files to my PC, convert all the text insets document by document for each book, then update the books and print the PDFs. I convert the text insets because I have some titles in my text insets. I am looking for a way to convert all of the text insets throughout a book automatically. Any suggestions (scripts, add-ins)? Many thx, Stephen O'BRIEN ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
[Framers] Convert ALL text insets in All documents of a book automatically?
Hi, I am using FM 12 and have several books with over 70 documents, all containing text insets. When I generate the monthly PDFs, I copy the files to my PC, convert all the text insets document by document for each book, then update the books and print the PDFs. I convert the text insets because I have some titles in my text insets. I am looking for a way to convert all of the text insets throughout a book automatically. Any suggestions (scripts, add-ins)? Many thx, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01D1E332.3304AF30]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
[Framers] "Exemplified" - use in technical documentation?
Hi, A new technical writer uses « exemplified in Fig. X.X» in captions to describe images in our technical reference documentation for a quality control software. I have asked that a simpler synonym be used (shown in Figure X.X). I consider that "exemplified" is not a commonly used term (I haven't heard or read the term in years) and is not easily read. The writer does not want to give the term up, considering it equal to "illustrated in". What do you think? Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01D1BB3B.06299CB0]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] slow-scrolling images
Hi, We did have a similar problem a while ago - suddenly, it took a really long time for a single image to be displayed while scrolling through a document. The problem was the arrival of a new tech writer, who imported referenced images differently that the rest of us. So, image paths on the network were not all defined in the same way - most writers specified a path that identified directly a server and the new writer a virtual path that hid three different servers. This somehow seemed to confuse FM (v11). The solution was to always use the same path (we chose the virtual path). Images then began to be displayed correctly. I wrote a script to look through all of our documents to find and change any rogue path definitions. Now that we know the problem, any occurrences are quickly resolved (is in our style sheet). Hope that helps, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 -Message d'origine- De : Framers [mailto:framers-bounces+sobrien=innovmetric@lists.frameusers.com] De la part de John Sgammato Envoyé : Wednesday, April 06, 2016 3:44 PM À : framers@lists.frameusers.com Objet : [Framers] slow-scrolling images Have any of you worthies seen and fixed this issue? I get a very slow response in FrameMaker when scrolling through files with referenced images. Obviously, the more images the slower the response when moving through the pages in a file. It takes longer than it should for each image to appear as the page scrolls -- <http://www.actifio.com/>*John Sgammato, Documentation Architect* *e* john.sgamm...@actifio.com *c* 508.927.2083 *t* @actifiodocs <http://twitter.com/actifiodocs> 333 Wyman Street, Waltham, MA 02451 <http://twitter.com/actifio><http://www.linkedin.com/company/399246> <https://plus.google.com/102870897962348937868/posts> <http://www.youtube.com/user/actifio><http://www.actifio.com/> *Manage, access, and protect your data with a single platform that saves you time, money, and complexity.* ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
RE: FM12 Crashes on File Open - Need Answer FAST
Hi, Opening from different locations with different results seems to point to a problem with unavailable or corrupt paths. Can you deactivate the graphics in FM (View > Options > Graphics) and then try to open the document ? Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 De : framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] De la part de Lin Sims Envoyé : Friday, June 19, 2015 11:07 AM À : Stuart Rogers Cc : Frame Users Objet : Re: FM12 Crashes on File Open - Need Answer FAST The weird thing? If I open the SAME FILE from my local hard drive in FM12, it's happy as a clam.The only time it crashes is if I open it from the server, and it's not that big a file (40 pages). I've deleted the problem graphic (an SVG generated by Visio 2013) and recreated a new SVG from Visio. Importing it and resaving as FM12 seems to have fixed the issue. On Fri, Jun 19, 2015 at 10:45 AM, Stuart Rogers mailto:srog...@phoenix-geophysics.com>> wrote: Try saving as .mif v.12 before reopening/saving as .fm v. 12? On 2015-Jun-19 10:16 AM, Lin Sims wrote: This file opens fine in Frame 10. It opens fine in Frame 12 IF it is a MIF file. As soon as I save the file from MIF10 to FM in Frame12, close it and reopen it, the program crashes again. I am, of course, on multiple deadlines, and yes, I do need this file to work in Frame12. HELP! -- Lin Sims ___ You are currently subscribed to framers as srog...@phoenix-geophysics.com<mailto:srog...@phoenix-geophysics.com>. Send list messages to framers@lists.frameusers.com<mailto:framers@lists.frameusers.com>. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com<mailto:framers-unsubscr...@lists.frameusers.com> or visit http://lists.frameusers.com/mailman/options/framers/srogers%40phoenix-geophysics.com Send administrative questions to listad...@frameusers.com<mailto:listad...@frameusers.com>. Visit http://www.frameusers.com/ for more resources and info. -- Stuart Rogers Technical Communicator Phoenix Geophysics Limited 3781 Victoria Park Avenue, Unit 3 Toronto, ON, Canada M1W 3K5 +1 (416) 491-7340 x 325 http://www.phoenix-geophysics.com -- Lin Sims ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Inconsistent Numbering Properties
Hi, Thanks for the many replies. It is unanimous that FM is just giving a warning that the numbering of a document that also appears in another book has changed on updating the current book. I understand that there is nothing that can be done to avoid that. I would like the warning to just not appear as it becomes tiresome and is not useful at all. Maybe it could be added to the list of Alerts that can be deactivated in the FM Preferences. Have a good day, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 De : Rick Quatro [mailto:r...@rickquatro.com] Envoyé : Friday, June 19, 2015 1:51 PM À : Stephen O'Brien; 'Frame Users' Objet : RE: Inconsistent Numbering Properties Hi Stephen, I don't think there is any way to avoid this. When you have a common document in your book, its page numbering will be set to how it was numbered the last time it was updated, either in the current book or any other book that it is contained in. That is where the mismatch may come from and FrameMaker is simply warning you about it. It should not be necessary to open the document and change its properties; when you update the book and dismiss the Inconsistent Numbering Properties dialog box, it should make the document's numbering the way it is supposed to be for that book. Rick Rick Quatro Carmen Publishing Inc. 585-366-4017 r...@frameexpert.com<mailto:r...@frameexpert.com> From: framers-boun...@lists.frameusers.com<mailto:framers-boun...@lists.frameusers.com> [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Stephen O'Brien Sent: Friday, June 19, 2015 12:35 PM To: Frame Users (framers@lists.frameusers.com<mailto:framers@lists.frameusers.com>) Subject: Inconsistent Numbering Properties Hi, This subject must come up regularly. I use the certain documents in several books. When I update those books I have Inconsistent Numbering Properties. I open the documents that are named. I set their numbering properties as in the book. But the problem is then put to another document, or same one. I only use documents within books. Is there some way to tell FrameMaker or a book to ignore the document numbering - use only the numbering done in the book. It would be great to understand/solve this once and for all. Thank you for any advice and have a good weekend, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01D0AAA9.D5B94C30]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Inconsistent Numbering Properties
Hi, This subject must come up regularly. I use the certain documents in several books. When I update those books I have Inconsistent Numbering Properties. I open the documents that are named. I set their numbering properties as in the book. But the problem is then put to another document, or same one. I only use documents within books. Is there some way to tell FrameMaker or a book to ignore the document numbering - use only the numbering done in the book. It would be great to understand/solve this once and for all. Thank you for any advice and have a good weekend, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01D0AA8C.5030E770]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Text insets : if in same FM document more than once internal x-refs do not update
Thx Dave – the cloud has lifted! Have a good day! Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 De : David Spreadbury [mailto:dspre...@yahoo.com] Envoyé : Sunday, May 24, 2015 11:45 AM À : Stephen O'Brien; Frame Users (framers@lists.frameusers.com) Objet : Re: Text insets : if in same FM document more than once internal x-refs do not update Stephen. The xref is pointing to a specific ID assigned to it, so each time it is called it will always link to that xref. To accomplish what you are attempting I believe you would need three unique insets, each referring to the respective illustration. If all three are in the same chapter why not insert it the first time and then reference the section containing the first inset in the other instances? Dave Spreadbury On Sunday, May 24, 2015 10:23 AM, Stephen O'Brien mailto:sobr...@innovmetric.com>> wrote: Hi, Have you seen this? I have a text inset that I insert into the same host document (chpt 3) three times. It has an internal cross-reference to a figure. When I update the host document the cross-references in the text insets all show the same Figure #. Instead of seeing see Fig. 3.1 and later see Fig. 3.2, they all show see Fig 3.1. The FM knowledgebase does say that a document’s external cross-references do not update correctly if the document targeted by the cross-reference is opened by a different user on the network. I still don’t quite get it. Your comments are appreciated, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01D09621.5D25A620]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n’êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu’un d’autre. Dans ce cas, veuillez le retourner à l’expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as dspre...@yahoo.com.<mailto:dspre...@yahoo.com.> Send list messages to framers@lists.frameusers.com.<mailto:framers@lists.frameusers.com.> To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com<mailto:framers-unsubscr...@lists.frameusers.com> or visit http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com Send administrative questions to listad...@frameusers.com.<mailto:listad...@frameusers.com.> Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Text insets : if in same FM document more than once internal x-refs do not update
Hi, Have you seen this? I have a text inset that I insert into the same host document (chpt 3) three times. It has an internal cross-reference to a figure. When I update the host document the cross-references in the text insets all show the same Figure #. Instead of seeing see Fig. 3.1 and later see Fig. 3.2, they all show see Fig 3.1. The FM knowledgebase does say that a document's external cross-references do not update correctly if the document targeted by the cross-reference is opened by a different user on the network. I still don't quite get it. Your comments are appreciated, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01D09613.5D56F7B0]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Accidental Change All (am I alone?)
Hi, We have recently had 2 incidents where the Change All operation was launched accidently - the dialog box is open and has the focus and the writer accidently, or in another goal, uses the ALT-A key combination. Change All is launched - no permission is asked and no Cancel or Undo is available. If working in a book, the changes are book wide! Can be catastrophic, believe me. Have you experienced this? Do you know of any solutions? Many thanks, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01D05C04.AC7FB6E0]<http://www.innovmetric.com/en/polyworks-conference-usa2015> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
On Book Update, FM 12 deleting networked files created in FM 9
Hi, This FM 12 problem is explained clearly by a posting by Veronica Kutt of Front Runner Training (I have the identical problem of files being deleted on book update, still occurs with latest patch): FrameMaker 12 seems to be deleting files from their network drive during the Update Book function, not just the file itself, but the backup version too. FrameMaker 10 files had been opened and re-saved as FrameMaker 12. Then, in a subsequent update of the book file, FM reported that it could not find a certain file, and the icon for that file in the book file turned into a question mark. On inspection of the folder that should contain the file, the file was gone, as was the .backup.fm version of the file. It is my assumption that this problem occurred during a book update, although it is remotely possible that the problem occurred while saving the files from Frame 10 to Frame 12. Have you seen this? Thanks, Stephen O'BRIEN Coordonnateur de la qualité documentaire et rédacteur technique senior | Quality Coordinator for Documentation and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01CFEEA7.F8043C50]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 12 - Create PDF with Adobe PDF printer
Hi, We just went from FM 9 to FM 12. I used to create PDFs with the Adobe PDF printer. That no longer works - the browser window opens to specify a destination and then it just hangs. Any suggestions? Thanks, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01CF8BB0.547EBA10]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Fit or fitted?
Hi, Yes, and this is the standard answer from the group as well. Thanks for the many answers! Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 De : Doris Evans-McCarthy [mailto:doris.evans-mccar...@riverbed.com] Envoyé : Wednesday, May 28, 2014 3:12 PM À : Writer; Stephen O'Brien; Frame Users (framers@lists.frameusers.com) Objet : RE: Fit or fitted? Yes, “fit” is generally American usage. “Fitted” is used globally. D From: framers-boun...@lists.frameusers.com<mailto:framers-boun...@lists.frameusers.com> [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Writer Sent: Wednesday, May 28, 2014 3:06 PM To: Stephen O'Brien; Frame Users (framers@lists.frameusers.com<mailto:framers@lists.frameusers.com>) Subject: Re: Fit or fitted? Merriam-Webster seems to accept "fitted". http://www.merriam-webster.com/dictionary/fitted Nadine ____________ From: Stephen O'Brien mailto:sobr...@innovmetric.com>> To: "Frame Users (framers@lists.frameusers.com<mailto:framers@lists.frameusers.com>)" mailto:framers@lists.frameusers.com>> Sent: Wednesday, May 28, 2014 2:50:01 PM Subject: Fit or fitted? Hi, We cannot undecided : "Typically, curves are fit/fitted to the surface." Any help is appreciated. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01CF7A88.3499A860]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n’êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu’un d’autre. Dans ce cas, veuillez le retourner à l’expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as generic...@yahoo.ca.<mailto:generic...@yahoo.ca.> Send list messages to framers@lists.frameusers.com.<mailto:framers@lists.frameusers.com.> To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com<mailto:framers-unsubscr...@lists.frameusers.com> or visit http://lists.frameusers.com/mailman/options/framers/generic668%40yahoo.ca Send administrative questions to listad...@frameusers.com.<mailto:listad...@frameusers.com.> Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Fit or fitted?
Hi, We cannot undecided : "Typically, curves are fit/fitted to the surface." Any help is appreciated. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01CF7A84.1730A750]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Trados and FM9 : Company requests files in MIF format?
Hi, (FM9, Windows 7) I have a book of 40 files, graphics imported by reference; no text insets. The translation company want me to provide files in MIF format. I am surprised that Trados does not accept the files in .FM format. Is this normal? I have never created MIF files before. At least, it seems like a long manual process. Is there a plug-in that does a complete book? I imagine the graphic files remain linked by reference. Any comments are much appreciated. BTW, we plan to upgrade to FM 12 very soon. Would that help (not have to convert to MIF?). Have a good day, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01CF740A.4C343AA0]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Spot cross-reference?
So spot cross-references do not work in FM9 unstructured? Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 De : Rick Quatro [mailto:r...@rickquatro.com] Envoyé : Friday, May 09, 2014 1:45 PM À : Stephen O'Brien; 'Frame Users' Objet : RE: Spot cross-reference? Hi Stephen, You can't do this with unstructured FrameMaker. With structured FrameMaker, you can pick up custom text from an attribute value and display it in a cross-reference. Please let me know if you have any questions or comments. Thank you very much. Rick Rick Quatro Carmen Publishing Inc. 585-366-4017 r...@frameexpert.com<mailto:r...@frameexpert.com> From: framers-boun...@lists.frameusers.com<mailto:framers-boun...@lists.frameusers.com> [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Stephen O'Brien Sent: Friday, May 09, 2014 11:26 AM To: Frame Users (framers@lists.frameusers.com<mailto:framers@lists.frameusers.com>) Subject: Spot cross-reference? Hi, In FM9, I have inserted the marker ( Cross-Reference type, content=Me) on the page and see its contents when I go to create the spot cross-reference. I just don't see how to define the FORMAT to see the text ("Me"). I have tried <$paratext>, of course that is not right. It must be really simple... Any help is very welcome! Thx, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01CF6B8D.5172EA00]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Spot cross-reference?
Hi, In FM9, I have inserted the marker ( Cross-Reference type, content=Me) on the page and see its contents when I go to create the spot cross-reference. I just don't see how to define the FORMAT to see the text ("Me"). I have tried <$paratext>, of course that is not right. It must be really simple... Any help is very welcome! Thx, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.gif@01CF6B79.6662A770]<http://www.innovmetric.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM9 PDF Bookmarks
Hi, Never seen this before - my PDF has bookmarks NOT specified in the PDF setup and that link to the Table of Contents (where it has the normal TOC version for formatting purposes). The paragraph type is on a page with two text frames, one with flow A (Autoconncect), the other with no flow. Could that be it?? I am out of ideas and not a Friday person (redundant). Thx! Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image003.jpg@01CF3F78.70A91BB0]<http://www.polyworksconference.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM9 - Fm files have disappeared from disk
Hi, Yesterday I spent a few hours updating cross-references in a book. I updated the TOCs several times. Saved all files several times. All went well. Today I open the same book and 6 files of 40 are missing - have the ? symbol. They are not on disk either. Has anyone seen this before. I am at a complete loss here. Thx for any advice. I do have a backup from the day before. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image003.jpg@01CF3C4D.737BDF40]<http://www.polyworksconference.com/> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Opening FM 9 via Remote Desktop crashes
Hi, I used a laptop connected to the network at work (cable) and from it ran Remote Desktop to access my computer just beside me. If FM is open, I can open/edit/save documents (located on a network server). If FM is closed, it crashes when launched by clicking the icon pinned to the taskbar. I would like to solve the launching of FM. Thx, Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software T (1) 418.688.2061 Ne manquez pas l'?v?nement PolyWorks Conference USA|2014<http://www.polyworksconference.com/> du 26-27 mars ? Novi, MI. Don't miss the PolyWorks Conference USA|2014<http://www.polyworksconference.com/> on March 26-27 in Novi, MI. De : framers-bounces at lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] De la part de Jeff Coatsworth Envoy? : Thursday, January 23, 2014 4:59 PM ? : Frame Users (framers at lists.frameusers.com) Objet : RE: Opening FM 9 via Remote Desktop crashes Salut a chilly Toronto! Has this ever worked for you? I run FM via RDP from home most days, but I first VPN into our corporate network, the RDP to my office desktop (when FM is installed) and run it from there. No crashes (except the "known" ones) doing it that way. In your scenario, where is FM running? From: framers-bounces at lists.frameusers.com<mailto:framers-bounces at lists.frameusers.com> [mailto:framers-bounces at lists.frameusers.com]<mailto:[mailto:framers-boun...@lists.frameusers.com]> On Behalf Of Stephen O'Brien Sent: January-23-14 4:26 PM To: Frame Users (framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>) Subject: Opening FM 9 via Remote Desktop crashes Hi, I have FM 9 (latest patch) running on Windows 7. I want to use FM via Remote Desktop. If FM is already open, I have tested opening/editing/saving a FM file sucessfully. If i click on the taskbar where FM is pinned to launch the application, the typical FM error screen is shown after a few seconds. I have FrameScript and do have a start-up file; I removed it and redid the test with a similar FM crash. Any suggestions? B...Here in Quebec CIty it is -35 Celcius with the wind and has been like that for a week now. As I walk 30 minutes to and from a bus stop on weekdays, I have taken to wearing a hood used when skiing! I look like a thief who is smoking heavily but do not attract any attention. After a 1/2 hour of walking, even my snacks (chewy bars) are frozen! And the polar bears drinking the Pepsi look so happy in those ads :) Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CF19D0.B68B2CE0]<http://www.polyworksconference.com/> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20140125/ffa1c8aa/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 48959 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20140125/ffa1c8aa/attachment.jpg>
Opening FM 9 via Remote Desktop crashes
Hi, I have FM 9 (latest patch) running on Windows 7. I want to use FM via Remote Desktop. If FM is already open, I have tested opening/editing/saving a FM file sucessfully. If i click on the taskbar where FM is pinned to launch the application, the typical FM error screen is shown after a few seconds. I have FrameScript and do have a start-up file; I removed it and redid the test with a similar FM crash. Any suggestions? B...Here in Quebec CIty it is -35 Celcius with the wind and has been like that for a week now. As I walk 30 minutes to and from a bus stop on weekdays, I have taken to wearing a hood used when skiing! I look like a thief who is smoking heavily but do not attract any attention. After a 1/2 hour of walking, even my snacks (chewy bars) are frozen! And the polar bears drinking the Pepsi look so happy in those ads :) Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CF1856.F1A91D80]<http://www.polyworksconference.com/> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20140123/7ce651ec/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 48959 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20140123/7ce651ec/attachment.jpg>
FM9 files on network - logical network drive X:
Hi, The problem occurs when a linked file, like an image in an anchored frame, is imported by browsing manually to the location defined using a logical drive like X:. When right-clicking on the image and looking at its properties the image path starts with X:. This causes the image blinking. With scripting, I replace the X: with the server name \\ServerName in the image path and all becomes well again. Scripting lets me make this correction over all my document set quickly and surely. I reason that since the document path starts with \\ServerName and the image path starts with X: that FM does not use a relative path. What I can attest to is that my problem of imported images blinking on the screen in my FM 9 documents is resolved when I replace a logical drive with the real network address. Hence my guess that the logical drive causes problems. Have a good day all, Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 De : framers-bounces at lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] De la part de Reng, Dr. Winfried Envoy? : Monday, November 18, 2013 2:53 AM ? : Frame Users (framers at lists.frameusers.com) Objet : RE: FM9 files on network - logical network drive X: Hi, I just assigned X: to one of my network folders, created a new file there and imported a graphics file. No problem. Everything as it should be (FrameMaker 11 on Windows 7). When your graphics file is on the same network drive, the path should be relative. That means, X: is not mentioned in the path name. Did you check the MIF file whether your path contains any X? Did you create a local file and import a graphics file from X:? Vice versa? What happens? What happens, if you assign another drive letter to one of your folders on X: and create a FrameMaker file there? Import a graphics file from this folder? All sorts of things may happen. However, I would also tend to believe that this is not related to the drive letter X:. Best regards Winfried From: framers-bounces at lists.frameusers.com<mailto:framers-bounces at lists.frameusers.com> [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Stephen O'Brien Sent: Friday, November 15, 2013 8:50 PM To: Frame Users (framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>) Subject: FM9 files on network - logical network drive X: Hi, (Windows7, FM9) The server (ex. \\Server) that houses our FM files is assigned a logical drive X:. I believe this has something to do with protecting against viruses. FM does not like this. For example, when an image is imported into a FM document using the X: path, the image blinks in the FM document, as if FM continually updates the definition of X: and the image path becomes momentarily unknown and then becomes known (and so the blinking where the image is displayed and then appears in gray and so on). Now I realize that some cross-references to other FM documents contain X: in the target document path. FM does not like that either. May crash because of this. Our IT guy says that the X: cannot be removed (same profile for all). My team of tech writers usually uses a shortcut (defined correctly from \\Server) to open books/documents but someone always forgets. I now have scripts that check the path for x-refs and images imported by reference. Does anyone know if this problem exists in later versions of FM (10 or 11)? That would solve this problem once and for all. Many thanks, Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CEE526.94FE3A10]<http://www.innovmetric.com/> [cid:image002.jpg at 01CEE526.94FE3A10] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CEE526.94FE3A10] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CEE526.94FE3A10] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CEE526.94FE3A10] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in
RE: FM9 files on network - logical network drive X:
Hi, The problem occurs when a linked file, like an image in an anchored frame, is imported by browsing manually to the location defined using a logical drive like X:. When right-clicking on the image and looking at its properties the image path starts with X:. This causes the image blinking. With scripting, I replace the X: with the server name \\ServerName in the image path and all becomes well again. Scripting lets me make this correction over all my document set quickly and surely. I reason that since the document path starts with \\ServerName and the image path starts with X: that FM does not use a relative path. What I can attest to is that my problem of imported images blinking on the screen in my FM 9 documents is resolved when I replace a logical drive with the real network address. Hence my guess that the logical drive causes problems. Have a good day all, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 De : framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] De la part de Reng, Dr. Winfried Envoyé : Monday, November 18, 2013 2:53 AM À : Frame Users (framers@lists.frameusers.com) Objet : RE: FM9 files on network - logical network drive X: Hi, I just assigned X: to one of my network folders, created a new file there and imported a graphics file. No problem. Everything as it should be (FrameMaker 11 on Windows 7). When your graphics file is on the same network drive, the path should be relative. That means, X: is not mentioned in the path name. Did you check the MIF file whether your path contains any X? Did you create a local file and import a graphics file from X:? Vice versa? What happens? What happens, if you assign another drive letter to one of your folders on X: and create a FrameMaker file there? Import a graphics file from this folder? All sorts of things may happen. However, I would also tend to believe that this is not related to the drive letter X:. Best regards Winfried From: framers-boun...@lists.frameusers.com<mailto:framers-boun...@lists.frameusers.com> [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Stephen O'Brien Sent: Friday, November 15, 2013 8:50 PM To: Frame Users (framers@lists.frameusers.com<mailto:framers@lists.frameusers.com>) Subject: FM9 files on network - logical network drive X: Hi, (Windows7, FM9) The server (ex. \\Server) that houses our FM files is assigned a logical drive X:. I believe this has something to do with protecting against viruses. FM does not like this. For example, when an image is imported into a FM document using the X: path, the image blinks in the FM document, as if FM continually updates the definition of X: and the image path becomes momentarily unknown and then becomes known (and so the blinking where the image is displayed and then appears in gray and so on). Now I realize that some cross-references to other FM documents contain X: in the target document path. FM does not like that either. May crash because of this. Our IT guy says that the X: cannot be removed (same profile for all). My team of tech writers usually uses a shortcut (defined correctly from \\Server) to open books/documents but someone always forgets. I now have scripts that check the path for x-refs and images imported by reference. Does anyone know if this problem exists in later versions of FM (10 or 11)? That would solve this problem once and for all. Many thanks, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01CEE526.94FE3A10]<http://www.innovmetric.com/> [cid:image002.jpg@01CEE526.94FE3A10] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CEE526.94FE3A10] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CEE526.94FE3A10] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CEE526.94FE3A10] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated
FM9 files on network - logical network drive X:
Hi, (Windows7, FM9) The server (ex. \\Server) that houses our FM files is assigned a logical drive X:. I believe this has something to do with protecting against viruses. FM does not like this. For example, when an image is imported into a FM document using the X: path, the image blinks in the FM document, as if FM continually updates the definition of X: and the image path becomes momentarily unknown and then becomes known (and so the blinking where the image is displayed and then appears in gray and so on). Now I realize that some cross-references to other FM documents contain X: in the target document path. FM does not like that either. May crash because of this. Our IT guy says that the X: cannot be removed (same profile for all). My team of tech writers usually uses a shortcut (defined correctly from \\Server) to open books/documents but someone always forgets. I now have scripts that check the path for x-refs and images imported by reference. Does anyone know if this problem exists in later versions of FM (10 or 11)? That would solve this problem once and for all. Many thanks, Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CEE210.A5B798B0]<http://www.innovmetric.com/> [cid:image002.jpg at 01CEE210.A5B798B0] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CEE210.A5B798B0] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CEE210.A5B798B0] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CEE210.A5B798B0] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131115/980918d7/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2370 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131115/980918d7/attachment.jpg> -- next part -- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2304 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131115/980918d7/attachment-0001.jpg> -- next part -- A non-text attachment was scrubbed... Name: image003.jpg Type: image/jpeg Size: 1892 bytes Desc: image003.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131115/980918d7/attachment-0002.jpg> -- next part -- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 2159 bytes Desc: image004.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131115/980918d7/attachment-0003.jpg> -- next part -- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 2322 bytes Desc: image005.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131115/980918d7/attachment-0004.jpg>
FM9 files on network - logical network drive X:
Hi, (Windows7, FM9) The server (ex. \\Server) that houses our FM files is assigned a logical drive X:. I believe this has something to do with protecting against viruses. FM does not like this. For example, when an image is imported into a FM document using the X: path, the image blinks in the FM document, as if FM continually updates the definition of X: and the image path becomes momentarily unknown and then becomes known (and so the blinking where the image is displayed and then appears in gray and so on). Now I realize that some cross-references to other FM documents contain X: in the target document path. FM does not like that either. May crash because of this. Our IT guy says that the X: cannot be removed (same profile for all). My team of tech writers usually uses a shortcut (defined correctly from \\Server) to open books/documents but someone always forgets. I now have scripts that check the path for x-refs and images imported by reference. Does anyone know if this problem exists in later versions of FM (10 or 11)? That would solve this problem once and for all. Many thanks, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01CEE210.A5B798B0]<http://www.innovmetric.com/> [cid:image002.jpg@01CEE210.A5B798B0] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CEE210.A5B798B0] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CEE210.A5B798B0] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CEE210.A5B798B0] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <><><><><>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Engineers as authors
Hi, Many thanks to everyone that answered my question as to how best to work with engineers who will soon become content providers for my team of technical writers. The answers (18) were mostly all of the same mind - have them use the authoring tool that they know (ex. Word), set up templates to facilitate importing into FrameMaker, and create guidelines/tools to allow them to prepare content that best corresponds to the required tasks. Some training may be useful individuals with weaker language skills. Your answers actually helped me nudge an existing project in a different direction. The engineers were being asked a level of writing that was beyond their abilities and a negative attitude was developing with regards to contributing expert content. Again, thanks for taking the time and sharing your experiences! You have clearly influenced how my project will develop. Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CECA76.7A9B68C0]<http://www.innovmetric.com/> [cid:image002.jpg at 01CECA76.7A9B68C0] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CECA76.7A9B68C0] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CECA76.7A9B68C0] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CECA76.7A9B68C0] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131016/cbc49555/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2370 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131016/cbc49555/attachment.jpg> -- next part -- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2304 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131016/cbc49555/attachment-0001.jpg> -- next part -- A non-text attachment was scrubbed... Name: image003.jpg Type: image/jpeg Size: 1892 bytes Desc: image003.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131016/cbc49555/attachment-0002.jpg> -- next part -- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 2159 bytes Desc: image004.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131016/cbc49555/attachment-0003.jpg> -- next part -- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 2322 bytes Desc: image005.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131016/cbc49555/attachment-0004.jpg>
Engineers as authors
Hi, Many thanks to everyone that answered my question as to how best to work with engineers who will soon become content providers for my team of technical writers. The answers (18) were mostly all of the same mind - have them use the authoring tool that they know (ex. Word), set up templates to facilitate importing into FrameMaker, and create guidelines/tools to allow them to prepare content that best corresponds to the required tasks. Some training may be useful individuals with weaker language skills. Your answers actually helped me nudge an existing project in a different direction. The engineers were being asked a level of writing that was beyond their abilities and a negative attitude was developing with regards to contributing expert content. Again, thanks for taking the time and sharing your experiences! You have clearly influenced how my project will develop. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01CECA76.7A9B68C0]<http://www.innovmetric.com/> [cid:image002.jpg@01CECA76.7A9B68C0] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CECA76.7A9B68C0] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CECA76.7A9B68C0] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CECA76.7A9B68C0] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <><><><><>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 8: Xref markers keep breaking and re-breaking
Hi, I have noticed that if there is a text inset marker at the beginning of a paragraph (ex. A title) and it precedes a cross-reference marker, the cross-reference marker may become invalid (unseen, unconsidered). The trick is to copy the cross-reference marker to another position in the title. Have a good one! Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 -Message d'origine- De?: framers-bounces at lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] De la part de Alison Craig Envoy??: Tuesday, October 01, 2013 6:26 PM ??: Scott Turner; Robert Lauriston Cc?: Framers Objet?: RE: FM 8: Xref markers keep breaking and re-breaking Not if you use X-Ref Markers in the Text Inset file. Alison -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Scott Turner Sent: Tuesday, October 01, 2013 2:57 PM To: Robert Lauriston Cc: Framers Subject: Re: FM 8: Xref markers keep breaking and re-breaking Ooo, yes. If you use text insets, any xref inside that text inset will be reported as "broken" even though it is valid. > On Sep 30, 2013, at 18:14, Robert Lauriston wrote: > > Which source type are you using when you create the markers? > > Are there any text insets involved? > > On Mon, Sep 30, 2013 at 3:40 PM, VLM TechSubs > wrote: >> Greetings! >> >> >> >> I put xref markers in throughout a book. These markers are simple >> xrefs to other chapters, nothing fancy. I generate the book, all is >> well. After working for a while, I do another generate (sometimes >> with intervening generates that were fine), and all of a sudden, lots >> of broken xrefs. I fix them all, generate, and all is well. Several >> generates later, poof! A large number of broken xrefs again. > ___ > > > You are currently subscribed to framers as quills at airmail.net. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/quills%40airmail.n > et > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as alison.craig at ultrasonix.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/alison.craig%40ultrasonix.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as sobrien at innovmetric.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: FM 8: Xref markers keep breaking and re-breaking
Hi, I have noticed that if there is a text inset marker at the beginning of a paragraph (ex. A title) and it precedes a cross-reference marker, the cross-reference marker may become invalid (unseen, unconsidered). The trick is to copy the cross-reference marker to another position in the title. Have a good one! Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 -Message d'origine- De : framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] De la part de Alison Craig Envoyé : Tuesday, October 01, 2013 6:26 PM À : Scott Turner; Robert Lauriston Cc : Framers Objet : RE: FM 8: Xref markers keep breaking and re-breaking Not if you use X-Ref Markers in the Text Inset file. Alison -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Scott Turner Sent: Tuesday, October 01, 2013 2:57 PM To: Robert Lauriston Cc: Framers Subject: Re: FM 8: Xref markers keep breaking and re-breaking Ooo, yes. If you use text insets, any xref inside that text inset will be reported as "broken" even though it is valid. > On Sep 30, 2013, at 18:14, Robert Lauriston wrote: > > Which source type are you using when you create the markers? > > Are there any text insets involved? > > On Mon, Sep 30, 2013 at 3:40 PM, VLM TechSubs > wrote: >> Greetings! >> >> >> >> I put xref markers in throughout a book. These markers are simple >> xrefs to other chapters, nothing fancy. I generate the book, all is >> well. After working for a while, I do another generate (sometimes >> with intervening generates that were fine), and all of a sudden, lots >> of broken xrefs. I fix them all, generate, and all is well. Several >> generates later, poof! A large number of broken xrefs again. > ___ > > > You are currently subscribed to framers as qui...@airmail.net. > > Send list messages to framers@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/quills%40airmail.n > et > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as alison.cr...@ultrasonix.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/alison.craig%40ultrasonix.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as sobr...@innovmetric.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Engineers as authors
Excellent question. It is my experience that writing obliges one to structure one's thought and make clear concepts that otherwise, expressed orally, are presented more vaguely. This is certainly a benefit, as is good, solid procedural documentation. There is the general question as to whether tech writers or engineers should be doing the work of documentation creation. To answer your question, it is seen as more work at this initial stage. Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 -Message d'origine- De?: Milan Davidovi? [mailto:milan.lists at gmail.com] Envoy??: Monday, October 07, 2013 12:45 PM ??: Stephen O'Brien Cc?: Frame Users (framers at lists.frameusers.com) Objet?: Re: Engineers as authors It looks as though the documentation they create has the potential to reduce the time they spend on those tasks. Aside from being "open" to the new responsibilities, do they see how it benefits them? Or do they simply see more work? --Milan Davidovi? Sent from my Yost 10 On Mon, Oct 7, 2013 at 11:40 AM, Stephen O'Brien wrote: > They are wondering what their exact responsibilities will be. They > have many other tasks (training, solving client problems over the phone or > on-site). > They are open to contributing content but at the same time have > questions about the time that can take.
Engineers as authors
Hi, Creating quality client-oriented documentation within a process managed by technical writers is new for them. They are wondering what their exact responsibilities will be. They have many other tasks (training, solving client problems over the phone or on-site). They are open to contributing content but at the same time have questions about the time that can take. Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 De : Milan Davidovi? [mailto:milan.lists at gmail.com] Envoy? : Monday, October 07, 2013 11:07 AM ? : Stephen O'Brien Cc : Frame Users (framers at lists.frameusers.com) Objet : Re: Engineers as authors How are the engineers responding to this? --Milan Davidovi? Sent from my Yost 10 On Mon, Oct 7, 2013 at 10:26 AM, Stephen O'Brien mailto:sobrien at innovmetric.com>> wrote: A few mechanical engineers have been asked, as part of their varied workload, to author certain documents in English (How To, Webinars, software essentials) in the near future. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131007/749f42e1/attachment.html>
Engineers as authors
Hi, A few mechanical engineers have been asked, as part of their varied workload, to author certain documents in English (How To, Webinars, software essentials) in the near future. Working with authors who are not formally trained is a new experience for me. I am wondering how to best define their tasks and the tasks of my technical writing group who will work together to ensure quality documents. For example: ? I could provide the engineers with templates in FrameMaker and an introduction to the basics of technical writing and English grammar and bring them to write good documents over time. Some formal training in technical writing could be offered. The technical writers would then review the final documents (container and content) to ensure the overall quality of the documents. ? Or, maybe the role of the engineers should be to write rough content within guidelines (get the ideas and workflows on paper), and my team of technical writers could be responsible for formatting the content and expressing their ideas/workflows correctly in English. This would take much less time for the engineer (less of a learning curve). Do you have some experience in this matter? Any hints for what may work best? Many thanks. Here in Quebec City, Canada autumn is in full color. Mother Nature at her very best. Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CEC33F.D8F31B90]<http://www.innovmetric.com/> [cid:image002.jpg at 01CEC33F.D8F31B90] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CEC33F.D8F31B90] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CEC33F.D8F31B90] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CEC33F.D8F31B90] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131007/d1b18f28/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2370 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131007/d1b18f28/attachment.jpg> -- next part -- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2304 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131007/d1b18f28/attachment-0001.jpg> -- next part -- A non-text attachment was scrubbed... Name: image003.jpg Type: image/jpeg Size: 1892 bytes Desc: image003.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131007/d1b18f28/attachment-0002.jpg> -- next part -- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 2159 bytes Desc: image004.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131007/d1b18f28/attachment-0003.jpg> -- next part -- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 2322 bytes Desc: image005.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20131007/d1b18f28/attachment-0004.jpg>
RE: Engineers as authors
Excellent question. It is my experience that writing obliges one to structure one's thought and make clear concepts that otherwise, expressed orally, are presented more vaguely. This is certainly a benefit, as is good, solid procedural documentation. There is the general question as to whether tech writers or engineers should be doing the work of documentation creation. To answer your question, it is seen as more work at this initial stage. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 -Message d'origine- De : Milan Davidović [mailto:milan.li...@gmail.com] Envoyé : Monday, October 07, 2013 12:45 PM À : Stephen O'Brien Cc : Frame Users (framers@lists.frameusers.com) Objet : Re: Engineers as authors It looks as though the documentation they create has the potential to reduce the time they spend on those tasks. Aside from being "open" to the new responsibilities, do they see how it benefits them? Or do they simply see more work? --Milan Davidović Sent from my Yost 10 On Mon, Oct 7, 2013 at 11:40 AM, Stephen O'Brien wrote: > They are wondering what their exact responsibilities will be. They > have many other tasks (training, solving client problems over the phone or > on-site). > They are open to contributing content but at the same time have > questions about the time that can take. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Engineers as authors
Hi, Creating quality client-oriented documentation within a process managed by technical writers is new for them. They are wondering what their exact responsibilities will be. They have many other tasks (training, solving client problems over the phone or on-site). They are open to contributing content but at the same time have questions about the time that can take. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer T (1) 418.688.2061 De : Milan Davidović [mailto:milan.li...@gmail.com] Envoyé : Monday, October 07, 2013 11:07 AM À : Stephen O'Brien Cc : Frame Users (framers@lists.frameusers.com) Objet : Re: Engineers as authors How are the engineers responding to this? --Milan Davidović Sent from my Yost 10 On Mon, Oct 7, 2013 at 10:26 AM, Stephen O'Brien mailto:sobr...@innovmetric.com>> wrote: A few mechanical engineers have been asked, as part of their varied workload, to author certain documents in English (How To, Webinars, software essentials) in the near future. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Engineers as authors
Hi, A few mechanical engineers have been asked, as part of their varied workload, to author certain documents in English (How To, Webinars, software essentials) in the near future. Working with authors who are not formally trained is a new experience for me. I am wondering how to best define their tasks and the tasks of my technical writing group who will work together to ensure quality documents. For example: · I could provide the engineers with templates in FrameMaker and an introduction to the basics of technical writing and English grammar and bring them to write good documents over time. Some formal training in technical writing could be offered. The technical writers would then review the final documents (container and content) to ensure the overall quality of the documents. · Or, maybe the role of the engineers should be to write rough content within guidelines (get the ideas and workflows on paper), and my team of technical writers could be responsible for formatting the content and expressing their ideas/workflows correctly in English. This would take much less time for the engineer (less of a learning curve). Do you have some experience in this matter? Any hints for what may work best? Many thanks. Here in Quebec City, Canada autumn is in full color. Mother Nature at her very best. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01CEC33F.D8F31B90]<http://www.innovmetric.com/> [cid:image002.jpg@01CEC33F.D8F31B90] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CEC33F.D8F31B90] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CEC33F.D8F31B90] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CEC33F.D8F31B90] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <><><><><>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Japanese translation - Thx!!!
Hi, I received many appreciated and precise responses from this group. I now realize that the translation firm was charging a 12$/page fee for doing the DTP in Frame (resizing text frames, etc.) above the translation costs. In addition, from your responses, I now better understand the translation process in general. This group is not only very knowledgeable but generous as well! Have a great day, Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CE74BA.FC0D1D20]<http://www.innovmetric.com/> [cid:image002.jpg at 01CE74BA.FC0D1D20] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CE74BA.FC0D1D20] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CE74BA.FC0D1D20] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CE74BA.FC0D1D20] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130629/cf435eff/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2370 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130629/cf435eff/attachment.jpg> -- next part -- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2304 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130629/cf435eff/attachment-0001.jpg> -- next part -- A non-text attachment was scrubbed... Name: image003.jpg Type: image/jpeg Size: 1892 bytes Desc: image003.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130629/cf435eff/attachment-0002.jpg> -- next part -- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 2159 bytes Desc: image004.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130629/cf435eff/attachment-0003.jpg> -- next part -- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 2322 bytes Desc: image005.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130629/cf435eff/attachment-0004.jpg>
Japanese translation - Thx!!!
Hi, I received many appreciated and precise responses from this group. I now realize that the translation firm was charging a 12$/page fee for doing the DTP in Frame (resizing text frames, etc.) above the translation costs. In addition, from your responses, I now better understand the translation process in general. This group is not only very knowledgeable but generous as well! Have a great day, Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01CE74BA.FC0D1D20]<http://www.innovmetric.com/> [cid:image002.jpg@01CE74BA.FC0D1D20] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CE74BA.FC0D1D20] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CE74BA.FC0D1D20] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CE74BA.FC0D1D20] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <><><><><>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Translating FM files into Japonese
Hi, We have located a translator in Japan to translate a 300-page training booklet written in English. The document is very largely table based with typically an image in row 1 and the caption underneath in row 2 with straddled narrow columns containing arrows to show a sequence of actions. The translator is charging reasonable translation costs and then there is an additional 12$/page cost because the files are from FrameMaker. When we questioned that cost, he asked if we could provide files in Trados format. Maybe he is not familiar with FrameMaker files. Anyway, I find this strange as in the past I have always provided FM files and the company doing the translation took care of everything else on their side. I received my Fm files translated into the target language from which I made PDFs. Can anyone familiar with translating FM files explain why the individual is requesting files in Trados format? Can that be done - just pay a company to generate Trados files from FM files? Many thanks (cold and wet here in Quebec City at 10 Celcius), Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CE73E8.8D647120]<http://www.innovmetric.com/> [cid:image002.jpg at 01CE73E8.8D647120] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CE73E8.8D647120] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CE73E8.8D647120] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CE73E8.8D647120] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130628/da06e99c/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2370 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130628/da06e99c/attachment.jpg> -- next part -- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2304 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130628/da06e99c/attachment-0001.jpg> -- next part -- A non-text attachment was scrubbed... Name: image003.jpg Type: image/jpeg Size: 1892 bytes Desc: image003.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130628/da06e99c/attachment-0002.jpg> -- next part -- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 2159 bytes Desc: image004.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130628/da06e99c/attachment-0003.jpg> -- next part -- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 2322 bytes Desc: image005.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130628/da06e99c/attachment-0004.jpg>
Translating FM files into Japonese
Hi, We have located a translator in Japan to translate a 300-page training booklet written in English. The document is very largely table based with typically an image in row 1 and the caption underneath in row 2 with straddled narrow columns containing arrows to show a sequence of actions. The translator is charging reasonable translation costs and then there is an additional 12$/page cost because the files are from FrameMaker. When we questioned that cost, he asked if we could provide files in Trados format. Maybe he is not familiar with FrameMaker files. Anyway, I find this strange as in the past I have always provided FM files and the company doing the translation took care of everything else on their side. I received my Fm files translated into the target language from which I made PDFs. Can anyone familiar with translating FM files explain why the individual is requesting files in Trados format? Can that be done - just pay a company to generate Trados files from FM files? Many thanks (cold and wet here in Quebec City at 10 Celcius), Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01CE73E8.8D647120]<http://www.innovmetric.com/> [cid:image002.jpg@01CE73E8.8D647120] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CE73E8.8D647120] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CE73E8.8D647120] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CE73E8.8D647120] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <><><><><>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 9 - Logical Network Drive
Hi, I wrote a few months ago about images, imported by reference, blinking on screen. The FM files and images are on a network server. The problem seems to be that the new tech writer used SnagIt to save new screen captures using the network logical drive specification (\\Oseille = X:). By scripting I did a search and replace. All seems well now. Quite a relief. Anyone else save images to a network drive using a logical drive specification? Any problems. Have a good day!! Stephen O'Brien Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 Don't miss the PolyWorks Conference USA | 2013<http://www.polyworksconference.com/> on May 29-30 in Troy, MI. [cid:image001.jpg at 01CE19B6.89EE4840]<http://www.innovmetric.com/> [cid:image002.jpg at 01CE19B6.89EE4840] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CE19B6.89EE4840] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CE19B6.89EE4840] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CE19B6.89EE4840] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, veuillez le retourner ? l'exp?diteur et le d?truire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130305/e32f95f8/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2370 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130305/e32f95f8/attachment.jpg> -- next part -- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2304 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130305/e32f95f8/attachment-0001.jpg> -- next part -- A non-text attachment was scrubbed... Name: image003.jpg Type: image/jpeg Size: 1892 bytes Desc: image003.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130305/e32f95f8/attachment-0002.jpg> -- next part -- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 2159 bytes Desc: image004.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130305/e32f95f8/attachment-0003.jpg> -- next part -- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 2322 bytes Desc: image005.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130305/e32f95f8/attachment-0004.jpg>
FM 9 - Logical Network Drive
Hi, I wrote a few months ago about images, imported by reference, blinking on screen. The FM files and images are on a network server. The problem seems to be that the new tech writer used SnagIt to save new screen captures using the network logical drive specification (\\Oseille = X:). By scripting I did a search and replace. All seems well now. Quite a relief. Anyone else save images to a network drive using a logical drive specification? Any problems. Have a good day!! Stephen O'Brien Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 Don't miss the PolyWorks Conference USA | 2013<http://www.polyworksconference.com/> on May 29-30 in Troy, MI. [cid:image001.jpg@01CE19B6.89EE4840]<http://www.innovmetric.com/> [cid:image002.jpg@01CE19B6.89EE4840] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CE19B6.89EE4840] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CE19B6.89EE4840] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CE19B6.89EE4840] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, veuillez le retourner à l'expéditeur et le détruire. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such a person), or you think for any reason that this message may have been addressed to you by mistake, you may not use or copy this message, or deliver it to anyone else. In which case, notify the sender and destroy the e-mail. <><><><><>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 9 Blinking linked images
Hi, We have been working like this with documents on a server for years with almost no problems. I see what you mean by copying the documents and images locally, but in our case we have documents with many text insets containing images...I cannot see how to copy the document, its images, and its text insets and their images in a simple manner. I have no checkout software and count on the network file locking for some protection from document access by multiple users. If I must proceed as you mention, it would require some effort and file reorganization. Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer -Message d'origine- De?: framers-bounces at lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] De la part de Jeremy H. Griffith Envoy??: Tuesday, November 20, 2012 12:08 PM ??: Frame Users (framers at lists.frameusers.com) Objet?: Re: FM 9 Blinking linked images On Tue, 20 Nov 2012 16:41:11 +0000, Stephen O'Brien wrote: >We are several tech writers using books/documents on a server, >containing images imported by reference (also on the server). Network >file locking is activated. The network is relatively fast. > ... >Any ideas? Our IT people are not familiar with FM and have not seen >this problem before. I have searched the knowledge base without >success. Frame has never, ever, worked right with network drives. This really should be in the KB, but I guess they don't want such features known, at least before purchase. :-( Alter your workflow to copy the docs and graphics to a local drive, and work on them there. Same problem with RH, and possibly other TCS components. Some may say it works for them, but they are a small minority... -- Jeremy H. Griffith, at Omni Systems Inc. http://mif2go.com/ ___ You are currently subscribed to framers as sobrien at innovmetric.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 9 Blinking linked images
Salut, We are several tech writers using books/documents on a server, containing images imported by reference (also on the server). Network file locking is activated. The network is relatively fast. Every day on the same workstation (FM9.0p.255, Windows 7 SP1), even in small documents (2 pages, 1 image), the image starts to blink. FM seems to freeze at this point (cannot scroll in the document or access menus). Must wait. Can last for minutes. A reboot re-establishes some order for a while (hours). The writer often has used Snag-It to get a screen shot just previous to this behavior. We all use Snag-It for screen captures. Any ideas? Our IT people are not familiar with FM and have not seen this problem before. I have searched the knowledge base without success. Thx for any suggestions. Stephen O'BRIEN Coordonnateur ? la documentation et r?dacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobrien at innovmetric.com<mailto:sobrien at innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg at 01CDC712.72495640]<http://www.innovmetric.com/> [cid:image002.jpg at 01CDC712.72495640] <http://www.youtube.com/polyworks/> [cid:image003.jpg at 01CDC712.72495640] <http://www.facebook.com/InnovMetric> [cid:image004.jpg at 01CDC712.72495640] <http://www.twitter.com/PolyWorks> [cid:image005.jpg at 01CDC712.72495640] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALIT?/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement ? InnovMetric Logiciels inc. ou ? ses filiales. Si vous n'?tes pas le destinataire indiqu? dans ce message (ou responsable de livrer ce message ? la personne indiqu?e ou pr?vue) ou si vous pensez que ce message vous a ?t? adress? par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer ? quelqu'un d'autre. Dans ce cas, vous devez le d?truire et vous ?tes pri? d'avertir l'exp?diteur en r?pondant au courriel. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such person), or you think for any reason that this message may have been addressed to you in error, you may not use or copy or deliver this message to anyone else. In such case, you should destroy this message and notify the sender by reply e-mail. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20121120/a18994b6/attachment.html> -- next part -- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2370 bytes Desc: image001.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20121120/a18994b6/attachment.jpg> -- next part -- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 2304 bytes Desc: image002.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20121120/a18994b6/attachment-0001.jpg> -- next part -- A non-text attachment was scrubbed... Name: image003.jpg Type: image/jpeg Size: 1892 bytes Desc: image003.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20121120/a18994b6/attachment-0002.jpg> -- next part -- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 2159 bytes Desc: image004.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20121120/a18994b6/attachment-0003.jpg> -- next part -- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 2322 bytes Desc: image005.jpg URL: <http://lists.frameusers.com/pipermail/framers/attachments/20121120/a18994b6/attachment-0004.jpg>
RE: FM 9 Blinking linked images
Hi, We have been working like this with documents on a server for years with almost no problems. I see what you mean by copying the documents and images locally, but in our case we have documents with many text insets containing images...I cannot see how to copy the document, its images, and its text insets and their images in a simple manner. I have no checkout software and count on the network file locking for some protection from document access by multiple users. If I must proceed as you mention, it would require some effort and file reorganization. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer -Message d'origine- De : framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] De la part de Jeremy H. Griffith Envoyé : Tuesday, November 20, 2012 12:08 PM À : Frame Users (framers@lists.frameusers.com) Objet : Re: FM 9 Blinking linked images On Tue, 20 Nov 2012 16:41:11 +0000, Stephen O'Brien wrote: >We are several tech writers using books/documents on a server, >containing images imported by reference (also on the server). Network >file locking is activated. The network is relatively fast. > ... >Any ideas? Our IT people are not familiar with FM and have not seen >this problem before. I have searched the knowledge base without >success. Frame has never, ever, worked right with network drives. This really should be in the KB, but I guess they don't want such features known, at least before purchase. :-( Alter your workflow to copy the docs and graphics to a local drive, and work on them there. Same problem with RH, and possibly other TCS components. Some may say it works for them, but they are a small minority... -- Jeremy H. Griffith, at Omni Systems Inc. http://mif2go.com/ ___ You are currently subscribed to framers as sobr...@innovmetric.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 9 Blinking linked images
Salut, We are several tech writers using books/documents on a server, containing images imported by reference (also on the server). Network file locking is activated. The network is relatively fast. Every day on the same workstation (FM9.0p.255, Windows 7 SP1), even in small documents (2 pages, 1 image), the image starts to blink. FM seems to freeze at this point (cannot scroll in the document or access menus). Must wait. Can last for minutes. A reboot re-establishes some order for a while (hours). The writer often has used Snag-It to get a screen shot just previous to this behavior. We all use Snag-It for screen captures. Any ideas? Our IT people are not familiar with FM and have not seen this problem before. I have searched the knowledge base without success. Thx for any suggestions. Stephen O'BRIEN Coordonnateur à la documentation et rédacteur technique senior | Documentation Coordinator and Senior Technical Writer InnovMetric Logiciels | Software sobr...@innovmetric.com<mailto:sobr...@innovmetric.com> T (1) 418.688.2061 F (1) 418.688.3001 [cid:image001.jpg@01CDC712.72495640]<http://www.innovmetric.com/> [cid:image002.jpg@01CDC712.72495640] <http://www.youtube.com/polyworks/> [cid:image003.jpg@01CDC712.72495640] <http://www.facebook.com/InnovMetric> [cid:image004.jpg@01CDC712.72495640] <http://www.twitter.com/PolyWorks> [cid:image005.jpg@01CDC712.72495640] <https://plus.google.com/u/0/100086255572014990082/posts> AVIS DE CONFIDENTIALITÉ/CONFIDENTIALITY NOTICE: Ce message peut contenir des renseignements confidentiels appartenant exclusivement à InnovMetric Logiciels inc. ou à ses filiales. Si vous n'êtes pas le destinataire indiqué dans ce message (ou responsable de livrer ce message à la personne indiquée ou prévue) ou si vous pensez que ce message vous a été adressé par erreur, vous ne pouvez pas utiliser ou reproduire ce message, ni le livrer à quelqu'un d'autre. Dans ce cas, vous devez le détruire et vous êtes prié d'avertir l'expéditeur en répondant au courriel. Proprietary confidential information belonging to InnovMetric Software Inc. and its affiliates may be contained in this message. If you are not a recipient indicated or intended in this message (or responsible for delivering this message to such person), or you think for any reason that this message may have been addressed to you in error, you may not use or copy or deliver this message to anyone else. In such case, you should destroy this message and notify the sender by reply e-mail. <><><><><>___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Demo version of FM10
Hi, I have a translator friend who translated some FM files using s demo version of FM 10 within the 30-day trial period. Some work has to be redone so he redownloaded a trial version of FM 10 (I am in no way condoning this practice) and has problems opening FM files, also messages about file locking... I just would like to know if this is due to using a second trial version on the same PC. If so, I will encourage him to buy the product. Many thx, Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobrien at innovmetric.com www.innovmetric.com <http://www.innovmetric.com>www.twitter.com/PolyWorks<http://www.twitter.com/PolyWorks> www.facebook.com/InnovMetric <http://www.facebook.com/InnovMetric>PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM) -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20120413/082f0ffd/attachment.html>
Demo version of FM10
Hi, I have a translator friend who translated some FM files using s demo version of FM 10 within the 30-day trial period. Some work has to be redone so he redownloaded a trial version of FM 10 (I am in no way condoning this practice) and has problems opening FM files, also messages about file locking... I just would like to know if this is due to using a second trial version on the same PC. If so, I will encourage him to buy the product. Many thx, Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobr...@innovmetric.com www.innovmetric.com <http://www.innovmetric.com>www.twitter.com/PolyWorks<http://www.twitter.com/PolyWorks> www.facebook.com/InnovMetric <http://www.facebook.com/InnovMetric>PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Opening a PDF file from FM 9 to a named destination
Hi and thx!! Problem solved! With your information that the named destination has a prefix (M8.newlink.) the command worked perfectly in the Internet browser: file:///c:/max_jan1.pdf#nameddest=M8.newlink.TagForMax Stephen At 01:57 AM 1/4/2012, Shlomo Perets wrote: >Stephen, > >You wrote: > >>... I have a simple FM file (3 pages) with a >>named destination created via a hypertext >>command (Specify Named Destination) on page 2 >>and a hyperlink (Jump To Named Destination) to >>it on page 3. I create the PDF file using the >>Adobe Printer. In the PDF Setup I have specified Create links and Tags as >>well. >> >>I need to be able to open the file using a URL >>command as below, in a navigator like Internet >>Explorer. It should open to the correct location on page 2 using this command. >> >>file:///c:/max_jan1.pdf#nameddest=TagForMax >> >>The PDF opens to page 1, not page 2 where the >>Named Destination is located. But the hyperlink >>on page 3 works, as clicking it brings me to page 2, to the exact location. >>... > > >-- Are you opening the target PDF locally or is >it web-based? Unfortunately, opening PDFs at a >named destination functions reliably only when >the target PDF is accessed from a web location. > >-- Inspect your PDF in Acrobat, and check >whether the TagForMax named destination indeed >appears in the Destinations panel. If you >created the destination using FrameMaker's >newlink hypertext marker, it would have a >'M8.newlink.' prefix (see >http://www.microtype.com/ImprovePDF12.html for >more information). Either change the HTML link >to reflect the destination name, or edit the destination name in Acrobat. > > >Shlomo Perets > >MicroType, http://www.microtype.com >FrameMaker/TCS training & consulting * FM-to-Acrobat TimeSavers/Assistants > > Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobrien at innovmetric.com www.innovmetric.com www.twitter.com/PolyWorks www.facebook.com/InnovMetric PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM) -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20120110/bbbce816/attachment.html>
Re: Opening a PDF file from FM 9 to a named destination
Hi and thx!! Problem solved! With your information that the named destination has a prefix (M8.newlink.) the command worked perfectly in the Internet browser: file:///c:/max_jan1.pdf#nameddest=M8.newlink.TagForMax Stephen At 01:57 AM 1/4/2012, Shlomo Perets wrote: Stephen, You wrote: ... I have a simple FM file (3 pages) with a named destination created via a hypertext command (Specify Named Destination) on page 2 and a hyperlink (Jump To Named Destination) to it on page 3. I create the PDF file using the Adobe Printer. In the PDF Setup I have specified Create links and Tags as well. I need to be able to open the file using a URL command as below, in a navigator like Internet Explorer. It should open to the correct location on page 2 using this command. file:///c:/max_jan1.pdf#nameddest=TagForMax The PDF opens to page 1, not page 2 where the Named Destination is located. But the hyperlink on page 3 works, as clicking it brings me to page 2, to the exact location. ... -- Are you opening the target PDF locally or is it web-based? Unfortunately, opening PDFs at a named destination functions reliably only when the target PDF is accessed from a web location. -- Inspect your PDF in Acrobat, and check whether the TagForMax named destination indeed appears in the Destinations panel. If you created the destination using FrameMaker's newlink hypertext marker, it would have a 'M8.newlink.' prefix (see http://www.microtype.com/ImprovePDF12.html for more information). Either change the HTML link to reflect the destination name, or edit the destination name in Acrobat. Shlomo Perets MicroType, http://www.microtype.com FrameMaker/TCS training & consulting * FM-to-Acrobat TimeSavers/Assistants Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobr...@innovmetric.com www.innovmetric.com www.twitter.com/PolyWorks www.facebook.com/InnovMetric PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Opening a PDF file from FM 9 to a named destination
Hi, I am using FM 9, latest patch, under Windows 7 (32-bit). I have a simple FM file (3 pages) with a named destination created via a hypertext command (Specify Named Destination) on page 2 and a hyperlink (Jump To Named Destination) to it on page 3. I create the PDF file using the Adobe Printer. In the PDF Setup I have specified Create links and Tags as well. I need to be able to open the file using a URL command as below, in a navigator like Internet Explorer. It should open to the correct location on page 2 using this command. file:///c:/max_jan1.pdf#nameddest=TagForMax The PDF opens to page 1, not page 2 where the Named Destination is located. But the hyperlink on page 3 works, as clicking it brings me to page 2, to the exact location. Any suggestions? I cannot see what I am doing wrong. Thx in advance and Happy New Year! Stephen Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobrien at innovmetric.com www.innovmetric.com www.twitter.com/PolyWorks www.facebook.com/InnovMetric PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM) -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20120101/b9942c52/attachment.html>
Opening a PDF file from FM 9 to a named destination
Hi, I am using FM 9, latest patch, under Windows 7 (32-bit). I have a simple FM file (3 pages) with a named destination created via a hypertext command (Specify Named Destination) on page 2 and a hyperlink (Jump To Named Destination) to it on page 3. I create the PDF file using the Adobe Printer. In the PDF Setup I have specified Create links and Tags as well. I need to be able to open the file using a URL command as below, in a navigator like Internet Explorer. It should open to the correct location on page 2 using this command. file:///c:/max_jan1.pdf#nameddest=TagForMax The PDF opens to page 1, not page 2 where the Named Destination is located. But the hyperlink on page 3 works, as clicking it brings me to page 2, to the exact location. Any suggestions? I cannot see what I am doing wrong. Thx in advance and Happy New Year! Stephen Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobr...@innovmetric.com www.innovmetric.com www.twitter.com/PolyWorks www.facebook.com/InnovMetric PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FrameMaker message client
Hi, This is interesting... Is there a way to send a message via Pandion with a hypertext command? Could you point me to a good ressource on this? Thx Stephen At 09:39 AM 10/3/2011, Syed Zaeem Hosain (Syed.Hosain at aeris.net) wrote: >I use "message URL mailto:name at address.com" >where I do the usual changes to "name" and "address.com". > >Z > >-Original Message- >From: framers-bounces at lists.frameusers.com >[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Steve Rickaby >Sent: Monday, October 03, 2011 5:57 AM >To: framers at lists.frameusers.com >Subject: FrameMaker message client > >I can find no reference to an e-mail equivalent >of 'message URL' in FrameMaker (v 7 here). > >Is there a way of initiating an e-mail from a >hypertext command, and if there is, is it platform-dependent? > >-- >Steve > >___ > > >You are currently subscribed to framers as sobrien at innovmetric.com. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com > >Send administrative questions to listadmin at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobrien at innovmetric.com www.innovmetric.com www.twitter.com/PolyWorks www.facebook.com/InnovMetric PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM) -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20111003/3f290549/attachment.html>
RE: FrameMaker message client
Hi, This is interesting... Is there a way to send a message via Pandion with a hypertext command? Could you point me to a good ressource on this? Thx Stephen At 09:39 AM 10/3/2011, Syed Zaeem Hosain (syed.hos...@aeris.net) wrote: I use "message URL mailto:n...@address.com"; where I do the usual changes to "name" and "address.com". Z -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Steve Rickaby Sent: Monday, October 03, 2011 5:57 AM To: framers@lists.frameusers.com Subject: FrameMaker message client I can find no reference to an e-mail equivalent of 'message URL' in FrameMaker (v 7 here). Is there a way of initiating an e-mail from a hypertext command, and if there is, is it platform-dependent? -- Steve ___ You are currently subscribed to framers as sobr...@innovmetric.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 sobr...@innovmetric.com www.innovmetric.com www.twitter.com/PolyWorks www.facebook.com/InnovMetric PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Adobe Pro 7 and Windows 7
Hi, I recently upgraded from XP to Windows 7. Do you know if Adobe Professional 7 works under Windows 7? A msg is popping up when I use Adobe Professional 7 saying that something has changed, and pops up a Register dialog box. I click to register and a msg displays error creating file, and this all starts again. Any ideas or similar experiences? Many thx, Stephen Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM)
Adobe Pro 7 and Windows 7
Hi, I recently upgraded from XP to Windows 7. Do you know if Adobe Professional 7 works under Windows 7? A msg is popping up when I use Adobe Professional 7 saying that something has changed, and pops up a Register dialog box. I click to register and a msg displays error creating file, and this all starts again. Any ideas or similar experiences? Many thx, Stephen Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Odd suffix - resolved
The network guy had not given me the correct rights :( Have a good day all! Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM)
FM9: Cannot save - File with odd suffix (.7DE)
Hi Framers, I jus changed computers - from XP to Windows 7. I am using FM9 p255. I have a file that I can open and edit but not save! FM says its temporary file cannot be renamed because it has an odd suffix, like "file.7DE". I deleted that file with the odd suffix and tried to save, same problem I saved to a different file, and when editing it same problem - odd suffix. But I have no problem working with our FM files on the network server (most of our files are there). Any ideas? Thx everyone! Stephen Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM)
Odd suffix - resolved
The network guy had not given me the correct rights :( Have a good day all! Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM9: Cannot save - File with odd suffix (.7DE)
Hi Framers, I jus changed computers - from XP to Windows 7. I am using FM9 p255. I have a file that I can open and edit but not save! FM says its temporary file cannot be renamed because it has an odd suffix, like "file.7DE". I deleted that file with the odd suffix and tried to save, same problem I saved to a different file, and when editing it same problem - odd suffix. But I have no problem working with our FM files on the network server (most of our files are there). Any ideas? Thx everyone! Stephen Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Space at beginning of title
Exatly!! It works!! I search \Px (where x is a space) and replace with nothing...great. Note that this also helped me find other spaces at beginning of regular paragraphs (not just titles) that should not be there. Thx to everyone who helped me solve this problem, and to Rick Quattro who called me at work to offer this same advice. What seemed like a lot of lost time now is a peice of cake - this group should get the Nobel Peace Prize!;) Stephen At 10:00 AM 12/16/2010, Michael Pearson wrote: >Sorry. I probably should have mentioned, you'll >want to replace with an empty string (that is, >with no text in the "Change" field). --mike > > >-- >From: mt_pearson at hotmail.com >To: sobrien at innovmetric.com; framers at lists.frameusers.com; framers at >omsys.com >Subject: RE: Space at beginning of title >Date: Thu, 16 Dec 2010 07:52:47 -0700 > >Hi Stephen, > >With "Use Wildcards" selected, try the search >string "\P_" (I'm using underscore here to >represent a space). Make sure you use a capital >"P" in that string. Should find those manually inserted spaces. > >HTH, >mike > > > Date: Thu, 16 Dec 2010 09:39:12 -0500 > > To: framers at lists.frameusers.com; framers at omsys.com > > From: sobrien at innovmetric.com > > Subject: Space at beginning of title > > > > Hi, > > > > We have redefined our title paragraph formats and > > the space that was entered manually is now > included in the numbering scheme. > > > > Result, additional space at the beginning of all > > titles (hundreds of them, of course). > > > > Cannot find successful search & replace scheme that works. > > > > Any ideas on how to solve this (I have > > Framescript if you know of any script that does this). > > > > Thanks and have a good day. > > > > Stephen O'Brien > > > > Stephen O'Brien > > Coordonnateur ? la documentation / Documentation Coordinator > > R?dacteur technique senior / Senior Technical Writer > > InnovMetric Logiciels inc. / InnovMetric Software Inc. > > 2014, Cyrille-Duquet, suite 310 > > Qu?bec (Qu?bec) Canada G1N 4N6 > > > > Tel.: (418) 688-2061 > > Fax: (418) 688-3001 > > E-mail: sobrien at innovmetric.com > > www.innovmetric.com > > PolyWorks, the Universal 3D Metrology Software Platform (TM) > > PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM) > > > > ___ > > > > > > You are currently subscribed to framers as mt_pearson at hotmail.com. > > > > Send list messages to framers at lists.frameusers.com. > > > > To unsubscribe send a blank email to > > framers-unsubscribe at lists.frameusers.com > > or visit > http://lists.frameusers.com/mailman/options/framers/mt_pearson%40hotmail.com > > > > Send administrative questions to listadmin at frameusers.com. Visit > > http://www.frameusers.com/ for more resources and info. Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM)
RE: Space at beginning of title
Exatly!! It works!! I search \Px (where x is a space) and replace with nothing...great. Note that this also helped me find other spaces at beginning of regular paragraphs (not just titles) that should not be there. Thx to everyone who helped me solve this problem, and to Rick Quattro who called me at work to offer this same advice. What seemed like a lot of lost time now is a peice of cake - this group should get the Nobel Peace Prize!;) Stephen At 10:00 AM 12/16/2010, Michael Pearson wrote: Sorry. I probably should have mentioned, you'll want to replace with an empty string (that is, with no text in the "Change" field). --mike -- From: mt_pear...@hotmail.com To: sobr...@innovmetric.com; framers@lists.frameusers.com; fram...@omsys.com Subject: RE: Space at beginning of title Date: Thu, 16 Dec 2010 07:52:47 -0700 Hi Stephen, With "Use Wildcards" selected, try the search string "\P_" (I'm using underscore here to represent a space). Make sure you use a capital "P" in that string. Should find those manually inserted spaces. HTH, mike > Date: Thu, 16 Dec 2010 09:39:12 -0500 > To: framers@lists.frameusers.com; fram...@omsys.com > From: sobr...@innovmetric.com > Subject: Space at beginning of title > > Hi, > > We have redefined our title paragraph formats and > the space that was entered manually is now included in the numbering scheme. > > Result, additional space at the beginning of all > titles (hundreds of them, of course). > > Cannot find successful search & replace scheme that works. > > Any ideas on how to solve this (I have > Framescript if you know of any script that does this). > > Thanks and have a good day. > > Stephen O'Brien > > Stephen O'Brien > Coordonnateur à la documentation / Documentation Coordinator > Rédacteur technique senior / Senior Technical Writer > InnovMetric Logiciels inc. / InnovMetric Software Inc. > 2014, Cyrille-Duquet, suite 310 > Québec (Québec) Canada G1N 4N6 > > Tel.: (418) 688-2061 > Fax: (418) 688-3001 > E-mail: sobr...@innovmetric.com > www.innovmetric.com > PolyWorks, the Universal 3D Metrology Software Platform (TM) > PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) > > ___ > > > You are currently subscribed to framers as mt_pear...@hotmail.com. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/mt_pearson%40hotmail.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Space at beginning of title
Hi, We have redefined our title paragraph formats and the space that was entered manually is now included in the numbering scheme. Result, additional space at the beginning of all titles (hundreds of them, of course). Cannot find successful search & replace scheme that works. Any ideas on how to solve this (I have Framescript if you know of any script that does this). Thanks and have a good day. Stephen O'Brien Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM)
Space at beginning of title
Hi, We have redefined our title paragraph formats and the space that was entered manually is now included in the numbering scheme. Result, additional space at the beginning of all titles (hundreds of them, of course). Cannot find successful search & replace scheme that works. Any ideas on how to solve this (I have Framescript if you know of any script that does this). Thanks and have a good day. Stephen O'Brien Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 9 - Odd behavior on opening a document
Hi, Usually an opened document appears as a tab(?) on the bar above the area where open documents appear. If multiple documents are opened, the names all appear on the same line (which is what I want). Since I have run IXGen (indexing tool), this behavior has changed. On generating a list of index entries with IXGen, each document opened was relocated to the bottom of the screen as an icon(?)...on clicking the icon the document appeared in the viewing area but with its own title bar, that I then dragged onto the general title bar where all of the names of opened documents appeared before. Now, each document I open has that same behavior. I have to click the icon, and then drag the document onto the title bar to put it where I want all my document names to appear. Is this clear? Has anyone else seen this? I cannot find how to return FM to the behavior I want. Thx for your comments. Stephen Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM)
FM 9 - Odd behavior on opening a document
Hi, Usually an opened document appears as a tab(?) on the bar above the area where open documents appear. If multiple documents are opened, the names all appear on the same line (which is what I want). Since I have run IXGen (indexing tool), this behavior has changed. On generating a list of index entries with IXGen, each document opened was relocated to the bottom of the screen as an icon(?)...on clicking the icon the document appeared in the viewing area but with its own title bar, that I then dragged onto the general title bar where all of the names of opened documents appeared before. Now, each document I open has that same behavior. I have to click the icon, and then drag the document onto the title bar to put it where I want all my document names to appear. Is this clear? Has anyone else seen this? I cannot find how to return FM to the behavior I want. Thx for your comments. Stephen Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM9 Crash Conditional Formats
Hi all, I use FM9 p255 under Windows XP On accessing the Conditional Format pod by menu or by clicking the pod, FM crashes... Today, at least 3 times! Anyone else out there have the same problem? Thx...I am not used to this! Just hired new tech writer - told her FM was stable... Stephen Stephen O'Brien Coordonnateur ? la documentation / Documentation Coordinator R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de m?trologie 3D (TM)
FM9 Crash Conditional Formats
Hi all, I use FM9 p255 under Windows XP On accessing the Conditional Format pod by menu or by clicking the pod, FM crashes... Today, at least 3 times! Anyone else out there have the same problem? Thx...I am not used to this! Just hired new tech writer - told her FM was stable... Stephen Stephen O'Brien Coordonnateur à la documentation / Documentation Coordinator Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform (TM) PolyWorks, la plate-forme logicielle universelle de métrologie 3D (TM) ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Diagonal line in a header cell
Hi, I have a table with titles in the header area and also in the left column (let's say the headers are stats and the lines are cities), and would like the header cell in the upper left corner to have a diagonal line from top left to bottom right where I could type Stats above the diagonal and Cities below as titles for the 2 sets of headers. This seems a common presentation style to me. I can't figure out how to make a good clean diagonal that really goes from cell corner to cell corner simply - or do I have to insert an anchored frame, etc. Any ideas are appreciated. Thanks everyone and have a good day. Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Diagonal line in a header cell
Hi, I have a table with titles in the header area and also in the left column (let's say the headers are stats and the lines are cities), and would like the header cell in the upper left corner to have a diagonal line from top left to bottom right where I could type Stats above the diagonal and Cities below as titles for the 2 sets of headers. This seems a common presentation style to me. I can't figure out how to make a good clean diagonal that really goes from cell corner to cell corner simply - or do I have to insert an anchored frame, etc. Any ideas are appreciated. Thanks everyone and have a good day. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Spam-Fortinet TOC not what should be
May be a typo...but the system variable chaptnum is in fact chapnum... At 03:59 PM 26/05/2009, poshedly at bellsouth.net wrote: ><http://www.nospammer.net/SpamSubmission/SubmitSpam?id=I3RgB3suWhNjb3df>If >this email is not spam, click here to submit the >signatures to FortiGuard - AntiSpam Service. > > >Hey all, > >(FM8.0 on an HP Pavilion pc) > >I'm having no success in generating a book TOC >where each line entry includes the topic (either >level 1 or level 2), followed by a tabbed dot >leader, followed by the "chapnum", then a dash >and then the "pagenum", like this: > >BLAH-BLAH LEVEL 1 1-3 >BLAH-BLAH LEVEL 2 .1-4 > >The chapnum and pagenum were set up in each of >the chapter master page footers via Format > >Headers&Footers, Insert page# and Insert other > >Chapter Number with a dash in between (as shown above) > >With the book file and all chapters opened, >Format > Document > Numbering and "1" was >selected for the first chapter and Continue >Numbering from Previous File in Book was used for the subsequent chapters. > >Then at the book level, it's Format > Add Table >of Contents, then moving only the Section Title, >Topic Level 1 and Topic Level 2 from the "Don't >Include" box to the "Include Paragraphs Tagged" >box (the TOC is set to be placed right after the >book's title page and before the first chapter). > >In the Update Book dialog box, all checkboxes >are checked and I click "Update" to generate the file. > >The resultant file is in Times Roman with a >space and a single page number for everything. > >BLAH-BLAH 1 (displays as the paragraph for Topic Level 1TOC) >BLAH-BLAH 2 (displays as the paragraph for Topic Level 2TOC) > >After using paragraph designer to "Update all" >with a Arial font, then a 6.9 in. right-aligned >tab with dot leader, I check the reference page, >and set the Topic Level 1TOC entry to ><$paratext>.<$chaptnum>-<$pagenum> > >and the Topic Level 2TOC entry to ><$paratext>..<$chaptnum>-<$pagenum> > >What I get is this: > >BLAH-BLAH LEVEL 1 3 >BLAH-BLAH LEVEL 2 .4 > >I've checked and doublechecked my settings and >even consulted chapter 12 of my printout of the >official FM 8.0 manual (what a doosy). Nothing >seems amiss, but still it's just not working. > >-- Kenpo in Atlanta >___ > > >You are currently subscribed to Framers as sobrien at innovmetric.com. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com > >Send administrative questions to listadmin at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. > Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.comwww.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Re: Spam-Fortinet TOC not what should be
May be a typo...but the system variable chaptnum is in fact chapnum... At 03:59 PM 26/05/2009, poshe...@bellsouth.net wrote: ><http://www.nospammer.net/SpamSubmission/SubmitSpam?id=I3RgB3suWhNjb3df>If >this email is not spam, click here to submit the >signatures to FortiGuard - AntiSpam Service. > > >Hey all, > >(FM8.0 on an HP Pavilion pc) > >I'm having no success in generating a book TOC >where each line entry includes the topic (either >level 1 or level 2), followed by a tabbed dot >leader, followed by the "chapnum", then a dash >and then the "pagenum", like this: > >BLAH-BLAH LEVEL 1 1-3 >BLAH-BLAH LEVEL 2 .1-4 > >The chapnum and pagenum were set up in each of >the chapter master page footers via Format > >Headers&Footers, Insert page# and Insert other > >Chapter Number with a dash in between (as shown above) > >With the book file and all chapters opened, >Format > Document > Numbering and "1" was >selected for the first chapter and Continue >Numbering from Previous File in Book was used for the subsequent chapters. > >Then at the book level, it's Format > Add Table >of Contents, then moving only the Section Title, >Topic Level 1 and Topic Level 2 from the "Don't >Include" box to the "Include Paragraphs Tagged" >box (the TOC is set to be placed right after the >book's title page and before the first chapter). > >In the Update Book dialog box, all checkboxes >are checked and I click "Update" to generate the file. > >The resultant file is in Times Roman with a >space and a single page number for everything. > >BLAH-BLAH 1 (displays as the paragraph for Topic Level 1TOC) >BLAH-BLAH 2 (displays as the paragraph for Topic Level 2TOC) > >After using paragraph designer to "Update all" >with a Arial font, then a 6.9 in. right-aligned >tab with dot leader, I check the reference page, >and set the Topic Level 1TOC entry to ><$paratext>.<$chaptnum>-<$pagenum> > >and the Topic Level 2TOC entry to ><$paratext>..<$chaptnum>-<$pagenum> > >What I get is this: > >BLAH-BLAH LEVEL 1 3 >BLAH-BLAH LEVEL 2 .4 > >I've checked and doublechecked my settings and >even consulted chapter 12 of my printout of the >official FM 8.0 manual (what a doosy). Nothing >seems amiss, but still it's just not working. > >-- Kenpo in Atlanta >___ > > >You are currently subscribed to Framers as sobr...@innovmetric.com. > >Send list messages to fram...@lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscr...@lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com > >Send administrative questions to listad...@frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. > Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.comwww.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
MIF2GO - (6507): Value of Separation out of range (11)
Hi, Can anyone help me finding out what this message means (when I wash a file with MIF2GO): (6507): Value of Separation out of range (11) Thx! Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
MIF2GO - (6507): Value of Separation out of range (11)
Hi, Can anyone help me finding out what this message means (when I wash a file with MIF2GO): (6507): Value of Separation out of range (11) Thx! Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Book problems - Fm 8 p277 - XP
Thanks. The files are on the network. But they are relatively small (66 pages) compared to other books (1200 pages) that work fine. I will wash and see what happens. Can I get any info on network timeout and using FM files - any documentation out there? Thx again. At 11:00 AM 07/05/2009, Art Campbell wrote: >To me, it sounds as if you're running out of memory/resources at the >end of the string of operations, but you didn't provide your system >specifics. And I wouldn't be at all surprised if there was some memory >leakage going on. Also whether you're running other memory-hungry aps >at the same time. I assume everything is fully patched. > >One other obvious thing to check -- if the files are on a server, >after multiple opens and closes, you may running into a network time >out on some files, which can also trigger a crash. > >If you haven't done so already, you may want to "wash" the component >files by saving to MIF and reopening, which would remove any odd >characters that may have crept in during the crashing episodes. > >Art > >Art Campbell >art.campbell at gmail.com > "... In my opinion, there's nothing in this world beats a '52 >Vincent and a redheaded girl." -- Richard Thompson > No disclaimers apply. > DoD 358 > > > >On Thu, May 7, 2009 at 10:42 AM, Stephen O'Brien > wrote: > > Hi, > > > > I have a series of 6 books of 6 documents > each that use common documents (2). > > > > Each book has a generated TOC. > > > > These books crash FM and I don't know why. > > > > For example, I create the book, do the numbering, > > update it, can print it, save after each > > operation, and close it. And then I just open and > > close the book 3 times in a row. The third time, > > FM crashes, the book is corrupt, and I have to > > recreate another book. And the problem will > > repeat itself. The backup book file may be corrupt too. > > > > Are there some basic rules to follow to avoid > > this. Does the first document in a book (often > > the title page) have special importance. Does it > > have to be configured in a special way? For > > example, can it use variables, conditional formats, conditional text, etc. > > > > I always use the same printer driver. > > > > I have fifteen other books that work just fine. Very stable. > > > > Any ideas... > > > > Thx much!!! > > > > > > Stephen O'Brien > > R?dacteur technique senior / Senior Technical Writer > > InnovMetric Logiciels inc. / InnovMetric Software Inc. > > 2014, Cyrille-Duquet, suite 310 > > Qu?bec (Qu?bec) Canada G1N 4N6 > > > > Tel.: (418) 688-2061 > > Fax: (418) 688-3001 > > E-mail: sobrien at innovmetric.com > > www.innovmetric.com > > PolyWorks, the Universal 3D Metrology > Software Platform for Manufacturing (TM) > > > > ___ > > > > > > You are currently subscribed to Framers as art.campbell at gmail.com. > > > > Send list messages to framers at lists.frameusers.com. > > > > To unsubscribe send a blank email to > > framers-unsubscribe at lists.frameusers.com > > or visit > http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > > > Send administrative questions to listadmin at frameusers.com. Visit > > http://www.frameusers.com/ for more resources and info. > > Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Book problems - Fm 8 p277 - XP
Hi, I have a series of 6 books of 6 documents each that use common documents (2). Each book has a generated TOC. These books crash FM and I don't know why. For example, I create the book, do the numbering, update it, can print it, save after each operation, and close it. And then I just open and close the book 3 times in a row. The third time, FM crashes, the book is corrupt, and I have to recreate another book. And the problem will repeat itself. The backup book file may be corrupt too. Are there some basic rules to follow to avoid this. Does the first document in a book (often the title page) have special importance. Does it have to be configured in a special way? For example, can it use variables, conditional formats, conditional text, etc. I always use the same printer driver. I have fifteen other books that work just fine. Very stable. Any ideas... Thx much!!! Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Re: Book problems - Fm 8 p277 - XP
Thanks. The files are on the network. But they are relatively small (66 pages) compared to other books (1200 pages) that work fine. I will wash and see what happens. Can I get any info on network timeout and using FM files - any documentation out there? Thx again. At 11:00 AM 07/05/2009, Art Campbell wrote: >To me, it sounds as if you're running out of memory/resources at the >end of the string of operations, but you didn't provide your system >specifics. And I wouldn't be at all surprised if there was some memory >leakage going on. Also whether you're running other memory-hungry aps >at the same time. I assume everything is fully patched. > >One other obvious thing to check -- if the files are on a server, >after multiple opens and closes, you may running into a network time >out on some files, which can also trigger a crash. > >If you haven't done so already, you may want to "wash" the component >files by saving to MIF and reopening, which would remove any odd >characters that may have crept in during the crashing episodes. > >Art > >Art Campbell >art.campb...@gmail.com > "... In my opinion, there's nothing in this world beats a '52 >Vincent and a redheaded girl." -- Richard Thompson > No disclaimers apply. > DoD 358 > > > >On Thu, May 7, 2009 at 10:42 AM, Stephen O'Brien > wrote: > > Hi, > > > > I have a series of 6 books of 6 documents > each that use common documents (2). > > > > Each book has a generated TOC. > > > > These books crash FM and I don't know why. > > > > For example, I create the book, do the numbering, > > update it, can print it, save after each > > operation, and close it. And then I just open and > > close the book 3 times in a row. The third time, > > FM crashes, the book is corrupt, and I have to > > recreate another book. And the problem will > > repeat itself. The backup book file may be corrupt too. > > > > Are there some basic rules to follow to avoid > > this. Does the first document in a book (often > > the title page) have special importance. Does it > > have to be configured in a special way? For > > example, can it use variables, conditional formats, conditional text, etc. > > > > I always use the same printer driver. > > > > I have fifteen other books that work just fine. Very stable. > > > > Any ideas... > > > > Thx much!!! > > > > > > Stephen O'Brien > > Rédacteur technique senior / Senior Technical Writer > > InnovMetric Logiciels inc. / InnovMetric Software Inc. > > 2014, Cyrille-Duquet, suite 310 > > Québec (Québec) Canada G1N 4N6 > > > > Tel.: (418) 688-2061 > > Fax: (418) 688-3001 > > E-mail: sobr...@innovmetric.com > > www.innovmetric.com > > PolyWorks, the Universal 3D Metrology > Software Platform for Manufacturing (TM) > > > > ___ > > > > > > You are currently subscribed to Framers as art.campb...@gmail.com. > > > > Send list messages to fram...@lists.frameusers.com. > > > > To unsubscribe send a blank email to > > framers-unsubscr...@lists.frameusers.com > > or visit > http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com > > > > Send administrative questions to listad...@frameusers.com. Visit > > http://www.frameusers.com/ for more resources and info. > > Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Book problems - Fm 8 p277 - XP
Hi, I have a series of 6 books of 6 documents each that use common documents (2). Each book has a generated TOC. These books crash FM and I don't know why. For example, I create the book, do the numbering, update it, can print it, save after each operation, and close it. And then I just open and close the book 3 times in a row. The third time, FM crashes, the book is corrupt, and I have to recreate another book. And the problem will repeat itself. The backup book file may be corrupt too. Are there some basic rules to follow to avoid this. Does the first document in a book (often the title page) have special importance. Does it have to be configured in a special way? For example, can it use variables, conditional formats, conditional text, etc. I always use the same printer driver. I have fifteen other books that work just fine. Very stable. Any ideas... Thx much!!! Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FrameScript - assign value to a FM variable
Hi, I have 2 variables in FM 8 that I want to assign values to: (1) Product: assign CAR in default font (2) ProductBold: assign DOLL with char format BoldOnly I use the Get command to get the varfmt I want and give the Set commands: Set vMyVariable1.fmt = 'DOLL'; Set vMyVariable2.fmt = 'CAR'; The first command works, the second does not...there is a weird character between the words Default and Font and I do not kow how to get that in the command... I have tried: - to copy paste the content from the FM dialog box to define a variable's value but that does not work - writing \p or \P or \r bewteen Default and Font and I do get characters but seemingly not the good one... This has to work today... Any ideas... Many thx! Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
FrameScript - assign value to a FM variable
Hi, I have 2 variables in FM 8 that I want to assign values to: (1) Product: assign CAR in default font (2) ProductBold: assign DOLL with char format BoldOnly I use the Get command to get the varfmt I want and give the Set commands: Set vMyVariable1.fmt = 'DOLL'; Set vMyVariable2.fmt = 'CAR'; The first command works, the second does not...there is a weird character between the words Default and Font and I do not kow how to get that in the command... I have tried: - to copy paste the content from the FM dialog box to define a variable's value but that does not work - writing \p or \P or \r bewteen Default and Font and I do get characters but seemingly not the good one... This has to work today... Any ideas... Many thx! Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Export to Word in FM 8?
Hi all, In FM 6 this export was offered as part of the Save As command.. In FM 8 I cannot see how to do this.. Any ideas? Not looking for complete solns...its for test purposes...if I have the basics (where to look) I can go from there... Thanks Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Export to Word in FM 8?
Hi all, In FM 6 this export was offered as part of the Save As command.. In FM 8 I cannot see how to do this.. Any ideas? Not looking for complete solns...its for test purposes...if I have the basics (where to look) I can go from there... Thanks Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Fm 8 - Track Changes - problems!
The Track Changes feature uses, I assume, conditional formats to color text and manage changes (refuse, accept). Problem: This feature seems to result in an unknown (un-named) conditional format affecting neighboring anchor symbols. So when I specify that only conditional format CF1 be shown, the polluted anchored frames that are supposed to have NO conditional format do not show, giving unresolved x-refs (see Fig. 3.1 but no anchored frame!!). I have found such situations in my current documents. Now if I try and use the normal dialog box to unconditionalize a selection of text containing the anchored frame symbol...nothing happens. Solution: I have to (1) move the anchored frame symbol elsewhere to a paragraph without any track changes, and (2) delete the still conditionalized text manually and re-enter that text and recreate any affected x-refs. Took time to find/understand (?)/solve! And I don't have all that much hair left (will soon move to fingernails)!! Any one else have this problem? Any better solutions or tips? Thanks!! P.S. I have the latest FM patch. XP with latest patch. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Fm 8 - Track Changes - problems!
The Track Changes feature uses, I assume, conditional formats to color text and manage changes (refuse, accept). Problem: This feature seems to result in an unknown (un-named) conditional format affecting neighboring anchor symbols. So when I specify that only conditional format CF1 be shown, the polluted anchored frames that are supposed to have NO conditional format do not show, giving unresolved x-refs (see Fig. 3.1 but no anchored frame!!). I have found such situations in my current documents. Now if I try and use the normal dialog box to unconditionalize a selection of text containing the anchored frame symbol...nothing happens. Solution: I have to (1) move the anchored frame symbol elsewhere to a paragraph without any track changes, and (2) delete the still conditionalized text manually and re-enter that text and recreate any affected x-refs. Took time to find/understand (?)/solve! And I don't have all that much hair left (will soon move to fingernails)!! Any one else have this problem? Any better solutions or tips? Thanks!! P.S. I have the latest FM patch. XP with latest patch. Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Name - dialog box control
Hi all, In the software I document, a new grid control has become more and more popular. Looks like a table (has rows and columns, can be sorted by clicking column headers, can move and hide columns). I cannot find in any of my sources the name for this control for documentation purposes. List? Table? I appreciate your suggestions. Many thanks. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Name - dialog box control
Hi all, In the software I document, a new grid control has become more and more popular. Looks like a table (has rows and columns, can be sorted by clicking column headers, can move and hide columns). I cannot find in any of my sources the name for this control for documentation purposes. List? Table? I appreciate your suggestions. Many thanks. Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM8 seems to be sluggish on my PC
Hi, Same thing happens to me with FM 8..when the Hypertext dialog box is open... Have a nice day! At 12:31 PM 19/01/2009, Avraham Makeler wrote: >Hi all, >FM8 seems to be sluggish on my PC. I mean trivial cursor tasks like jumping >the cursor from one word to another or selecting text. My PC is a 2.8 GHz >Pentium IV (full architecture) and it is really fast and great for >everything else. > >FM7.2 is much more snappy on my PC. > >Has anybody else noticed this about FM8? > >Is there something I can to do to speed things up? Like disable some mode or >something? > >TIA > >- avi >___ > > >You are currently subscribed to Framers as sobrien at innovmetric.com. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com > >Send administrative questions to listadmin at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Re: FM8 seems to be sluggish on my PC
Hi, Same thing happens to me with FM 8..when the Hypertext dialog box is open... Have a nice day! At 12:31 PM 19/01/2009, Avraham Makeler wrote: >Hi all, >FM8 seems to be sluggish on my PC. I mean trivial cursor tasks like jumping >the cursor from one word to another or selecting text. My PC is a 2.8 GHz >Pentium IV (full architecture) and it is really fast and great for >everything else. > >FM7.2 is much more snappy on my PC. > >Has anybody else noticed this about FM8? > >Is there something I can to do to speed things up? Like disable some mode or >something? > >TIA > >- avi >___ > > >You are currently subscribed to Framers as sobr...@innovmetric.com. > >Send list messages to fram...@lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscr...@lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/sobrien%40innovmetric.com > >Send administrative questions to listad...@frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Help: Hypertext command "popup menu"
Each submenu item (ex. Apple) is on a separate line on a reference page (whose workflow name is used by the popup command). I make sure the proper paragraph format is applied. I use the same approach fo the second submenu as for the first. Have you tried and gotten two submenus to work (their commands that is)? Thanks. At 04:38 PM 16/01/2009, Matt Sullivan wrote: >Hi Stephen, > > >Have you isolated the individual markers with separate paragraphs or with >character tags? If you have multiple markers within the same para, FM (IIRC) >only recognizes the first. > >-Matt > > > >Matt Sullivan >GRAFIX Training & Consulting > >office 714 960-6840 > >cell 714 585-2335 > >-Original Message- >From: framers-bounces at lists.frameusers.com >[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Stephen O'Brien >Sent: Friday, January 16, 2009 1:21 PM >To: framers at frameusers.com; framers at omsys.com >Subject: Help: Hypertext command "popup menu" > >Hi, > >I use hypertext commands in the header area of a >FM 8 document (latest patch) to display a menu >(ex. Snacks) with two submenus (ex. Fruits and Vegetables). See example >below: > >Snacks > [Fruits]...Apple > Orange > Banana > [Vegetables]...Carrot > Potato > >The commands on each submenu (a name with a link >to a URL) show when I click a submenu name, but >only the items in the first submenu, when >clicked, actually work (open the URL). So, >clicking Apple works, but not Carrot or Potato (and veggies are important!). > >Any ideas? I really need a second and a third submenu!! > >See, I am conceiving a header area of a FM >document (it automatically loads on starting FM) >that would provide access via menus/submenus to >all Documentation ressources (books, documents, >Excel files, Web sites, etc.). Makes it easy to >add new ressources and explain them to new tech >writers without having to browse subdirectory >structures, create Windows shortcuts, etc. > >Thanks for any help!! > >Stephen O'Brien >R?dacteur technique senior / Senior Technical Writer >InnovMetric Logiciels inc. / InnovMetric Software Inc. >2014, Cyrille-Duquet, suite 310 >Qu?bec (Qu?bec) Canada G1N 4N6 > >Tel.: (418) 688-2061 >Fax: (418) 688-3001 >E-mail: sobrien at innovmetric.com >www.innovmetric.com >PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing >(TM) > >___ > > >You are currently subscribed to Framers as matt at grafixtraining.com. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/matt%40grafixtraining.co >m > >Send administrative questions to listadmin at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Resource..
Sorry for spelling error in previous e-mail (I know its resource). Thx. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Help: Hypertext command "popup menu"
Hi, I use hypertext commands in the header area of a FM 8 document (latest patch) to display a menu (ex. Snacks) with two submenus (ex. Fruits and Vegetables). See example below: Snacks [Fruits]...Apple Orange Banana [Vegetables]...Carrot Potato The commands on each submenu (a name with a link to a URL) show when I click a submenu name, but only the items in the first submenu, when clicked, actually work (open the URL). So, clicking Apple works, but not Carrot or Potato (and veggies are important!). Any ideas? I really need a second and a third submenu!! See, I am conceiving a header area of a FM document (it automatically loads on starting FM) that would provide access via menus/submenus to all Documentation ressources (books, documents, Excel files, Web sites, etc.). Makes it easy to add new ressources and explain them to new tech writers without having to browse subdirectory structures, create Windows shortcuts, etc. Thanks for any help!! Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
RE: Help: Hypertext command "popup menu"
Each submenu item (ex. Apple) is on a separate line on a reference page (whose workflow name is used by the popup command). I make sure the proper paragraph format is applied. I use the same approach fo the second submenu as for the first. Have you tried and gotten two submenus to work (their commands that is)? Thanks. At 04:38 PM 16/01/2009, Matt Sullivan wrote: >Hi Stephen, > > >Have you isolated the individual markers with separate paragraphs or with >character tags? If you have multiple markers within the same para, FM (IIRC) >only recognizes the first. > >-Matt > > > >Matt Sullivan >GRAFIX Training & Consulting > >office 714 960-6840 > >cell 714 585-2335 > >-Original Message- >From: framers-boun...@lists.frameusers.com >[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Stephen O'Brien >Sent: Friday, January 16, 2009 1:21 PM >To: fram...@frameusers.com; fram...@omsys.com >Subject: Help: Hypertext command "popup menu" > >Hi, > >I use hypertext commands in the header area of a >FM 8 document (latest patch) to display a menu >(ex. Snacks) with two submenus (ex. Fruits and Vegetables). See example >below: > >Snacks > [Fruits]...Apple > Orange > Banana > [Vegetables]...Carrot > Potato > >The commands on each submenu (a name with a link >to a URL) show when I click a submenu name, but >only the items in the first submenu, when >clicked, actually work (open the URL). So, >clicking Apple works, but not Carrot or Potato (and veggies are important!). > >Any ideas? I really need a second and a third submenu!! > >See, I am conceiving a header area of a FM >document (it automatically loads on starting FM) >that would provide access via menus/submenus to >all Documentation ressources (books, documents, >Excel files, Web sites, etc.). Makes it easy to >add new ressources and explain them to new tech >writers without having to browse subdirectory >structures, create Windows shortcuts, etc. > >Thanks for any help!! > >Stephen O'Brien >Rédacteur technique senior / Senior Technical Writer >InnovMetric Logiciels inc. / InnovMetric Software Inc. >2014, Cyrille-Duquet, suite 310 >Québec (Québec) Canada G1N 4N6 > >Tel.: (418) 688-2061 >Fax: (418) 688-3001 >E-mail: sobr...@innovmetric.com >www.innovmetric.com >PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing >(TM) > >___ > > >You are currently subscribed to Framers as m...@grafixtraining.com. > >Send list messages to fram...@lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscr...@lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/matt%40grafixtraining.co >m > >Send administrative questions to listad...@frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Resource..
Sorry for spelling error in previous e-mail (I know its resource). Thx. Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Help: Hypertext command "popup menu"
Hi, I use hypertext commands in the header area of a FM 8 document (latest patch) to display a menu (ex. Snacks) with two submenus (ex. Fruits and Vegetables). See example below: Snacks [Fruits]...Apple Orange Banana [Vegetables]...Carrot Potato The commands on each submenu (a name with a link to a URL) show when I click a submenu name, but only the items in the first submenu, when clicked, actually work (open the URL). So, clicking Apple works, but not Carrot or Potato (and veggies are important!). Any ideas? I really need a second and a third submenu!! See, I am conceiving a header area of a FM document (it automatically loads on starting FM) that would provide access via menus/submenus to all Documentation ressources (books, documents, Excel files, Web sites, etc.). Makes it easy to add new ressources and explain them to new tech writers without having to browse subdirectory structures, create Windows shortcuts, etc. Thanks for any help!! Stephen O'Brien Rédacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Québec (Québec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobr...@innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Framescript - Exist Directory?
Thanks to all who answered. My script now runs. Great. At 10:57 AM 12/01/2009, Frank Elmore wrote: >Hello Stephen, > >You can use the same command (eSys.FileExist) >for files or directories. Just use a directory name in place of a file name. > >Frank Elmore >Project leader for FrameScript > >- Original Message - From: "Stephen O'Brien" innovmetric.com> >To: ; >Sent: Monday, January 12, 2009 10:07 AM >Subject: Framescript - Exist Directory? > > >To FrameScript users: > >Is there a way to determine that a directory >exists (like the command FileExist). > >Thanks to all. > > > >Stephen O'Brien >R?dacteur technique senior / Senior Technical Writer >InnovMetric Logiciels inc. / InnovMetric Software Inc. >2014, Cyrille-Duquet, suite 310 >Qu?bec (Qu?bec) Canada G1N 4N6 > >Tel.: (418) 688-2061 >Fax: (418) 688-3001 >E-mail: sobrien at innovmetric.com >www.innovmetric.com >PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM) > >___ > > >You are currently subscribed to Framers as elmsoft at comcast.net. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/elmsoft%40comcast.net > >Send administrative questions to listadmin at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)
Framescript - Exist Directory?
To FrameScript users: Is there a way to determine that a directory exists (like the command FileExist). Thanks to all. Stephen O'Brien R?dacteur technique senior / Senior Technical Writer InnovMetric Logiciels inc. / InnovMetric Software Inc. 2014, Cyrille-Duquet, suite 310 Qu?bec (Qu?bec) Canada G1N 4N6 Tel.: (418) 688-2061 Fax: (418) 688-3001 E-mail: sobrien at innovmetric.com www.innovmetric.com PolyWorks, the Universal 3D Metrology Software Platform for Manufacturing (TM)