Hi,
When i convert a fm file to pdf some links in the pdf file are not opening
sometimes. I have taken all the steps and even imported the formats from the
other files and tried with that, its working fine for Generated files but I
am facing this problem for the chapter files.
Is this the
Hi Sindu,
In the PDF Setup dialog box, click the Links tab. Make sure the checkbox is
checked and click Set. Make a new PDF and see if this solves the problem.
Rick Quatro
Carmen Publishing
585-659-8267
www.frameexpert.com
Hi,
When i convert a fm file to pdf some links in the pdf file are
Not long ago someone posted a message about how to use Apply Master Pages
and the default Left master page to automatically apply a customized master
page to a final blank left page. I thought the technique was terribly
elegant and managed to create such a master page scheme.
Now I have a
I am told that mif2go can really duplicate the look of a frame doc, but I am
missing some details.
I am told that in the mif2go setup there is somewhere where one can pick a
frame file that acts as a template for the frame to word conversion. I cannot
find where this option is.
Also, he said
Well,
Jeremy may respond too because he's on the list, but here's my take:
* When you set up your project, you can enter the name of a FM
template file to apply to the source files before conversion if you
want to change the appearance of the end document. This path and file
name can also be
On Tue, 25 Apr 2006 17:01:44 +, [EMAIL PROTECTED]
wrote:
I am told that mif2go can really duplicate the look of
a frame doc,
Yes, it can.
but I am missing some details.
I am told that in the mif2go setup there is somewhere
where one can pick a frame file that acts as a template
for
Thanks.
How do you see the Set up print rtf project dialog after the first setup?
It seems to show once, and then disappear.
I have looked through the manual enough to get my frame to go to word, but the
word version is still 30 percent bigger than the frame, so it does not look
like the
On Tue, 25 Apr 2006 19:13:15 +, [EMAIL PROTECTED]
wrote:
Thanks.
Quite welcome!
How do you see the Set up print rtf project
dialog after the first setup?
It seems to show once, and then disappear.
Right, if there is already a mif2rtf.ini, it doesn't
overwrite it, as that could zap
I have a three-column index with three entry levels. (I cannot use only
two levels - I have gone over this with an indexing guru - sigh!) Anyway,
The first level is not indented, the second level is only slightly
indented beneath the first and the third level is slightly indented
beneath the
Hi Tammy,
Change the separator to use a nonbreaking hyphen instead of a regular
hyphen. This is in your IX reference page. You'll find something like this:
$chapnum-$pagenum
in the IndexIX line.
Change the hyphen to a nonbreaking hyphen.
Regards,
Sarah
[EMAIL PROTECTED] wrote:
I have a
Hi Ranvijay
I don't know if anyone's replied to you off list, but I can't see any replies
to the list so I thought I would reply.
You need to give us different information. The image you attached got dropped
by the list - the list won't accept any attachments. Also, FM gives internal
errors
Bill:
sell into the Academic publishing market
And into the commercial publishing non-fiction market! Then publishers
can stop using dumb Cindex and Sky Index to produce indexes that don't
embed in the source text and have to be done all over again when they (a)
publish the illustrated
Hello,
Does anyone know how to override missing fonts?
Here is my issue: When opening a file, FM gives me the missing font/will be
reformatted message. I click OK. The document is automatically reformatted.
I save and close. When I open the doc again, I get the missing font message.
The
Hi All,
This is a critical error that I am getting when I save one particular
framemaker file in my book.
It does not give this error for other framemaker files.
Please see the attached image for details about the error.
Please provide a solution or workaround to this problem.
Thanks and
Hi,
When i convert a fm file to pdf some links in the pdf file are not opening
sometimes. I have taken all the steps and even imported the formats from the
other files and tried with that, its working fine for Generated files but I
am facing this problem for the chapter files.
Is this the
Hi Sindu,
In the PDF Setup dialog box, click the Links tab. Make sure the checkbox is
checked and click Set. Make a new PDF and see if this solves the problem.
Rick Quatro
Carmen Publishing
585-659-8267
www.frameexpert.com
Hi,
When i convert a fm file to pdf some links in the pdf file are
Look inside my FrameMaker crystal ball. Can you see what I see? It's a bit
foggy, but if you concentrate for just a minute, an amazing new product will
come into focus. It's a technical writers dream come true ...
www.thecontentwrangler.com
Scott Abel
Content Management Strategist
The
The Rockley Group and Blast Radius just released part two of their two-part
whitepaper, "Planning for DITA Success: How to Deploy DITA, Step-By-Step". Get
your free copy today.
Visit: http://www.rockley.com
Scott Abel
Content Management Strategist
The Content Wrangler, Inc.
3421 Crystal
This should be easy but I can't get it to work.
I need a variable that shows the month and year, for example April 2006. I
created a custom variable based on the definition of the system variable
"Current Date (long)", which is defined as <$monthname> <$daynum>, <$year>.
My new custom variable
But what would be *new* about it, except for existing products being bundled
together? This may be beneficial for someone just starting out, but for
those of us that already have a couple of the products, buying the bundle
will likely be more expensive than buying the missing pieces. And
A few flaws in this "vision"...
One, RoboHelp for FrameMaker was discontinued long ago and even though
the source code is now in Adobe's hands, they have a significant chunk
of it to either fix or toss and rewrite. RHFM was clunky, a resource
hog, slow as molasses, and buggy, and had very little
Total and utter speculation by "The Content Wrangler"
without any announcements, leaks (credible or otherwise),
or other evidence to back it up ...
> -Original Message-
> From: lists.frameusers.com
> On Behalf Of Bill Swallow
> Sent: Tuesday, April 25, 2006 6:14 AM
> To: framers at
That's what I thought.
GIGO.
On 4/25/06, Dov Isaacs wrote:
> Total and utter speculation by "The Content Wrangler"
> without any announcements, leaks (credible or otherwise),
> or other evidence to back it up ...
--
Bill Swallow
HATT List Owner
WWP-Users List Owner
Senior Member STC,
The building blocks you are trying to use can only be used in the
definitions of System Variables. User Variables only support static
values. You cannot add new System Variables, but you *can*
redefine the existing System Variables with different building
blocks to suit your needs; you just can't
Not long ago someone posted a message about how to use Apply Master Pages
and the default Left master page to automatically apply a customized master
page to a final blank left page. I thought the technique was terribly
elegant and managed to create such a master page scheme.
Now I have a
Hi Framers,
I seem to recall that someone on this list put together a comprehensive list
of Frame keyboard shortcuts. If anyone has this list, would you mind sending
it to me?
Thanks,
Nancy Adams
I am told that mif2go can really duplicate the look of a frame doc, but I am
missing some details.
I am told that in the mif2go setup there is somewhere where one can pick a
frame file that acts as a template for the frame to word conversion. I cannot
find where this option is.
Also, he said
Well,
Jeremy may respond too because he's on the list, but here's my take:
* When you set up your project, you can enter the name of a FM
template file to apply to the source files before conversion if you
want to change the appearance of the end document. This path and file
name can also be
On Tue, 25 Apr 2006 17:01:44 +, obair81 at comcast.net
wrote:
>I am told that mif2go can really duplicate the look of
>a frame doc,
Yes, it can.
>but I am missing some details.
>
>I am told that in the mif2go setup there is somewhere
>where one can pick a frame file that acts as a
The "Content Wrangler's" "vision" of FrameMaker?s
future is fatally flawed. It would do little to
improve the quality of on-line help, or increase the
penetration of FrameMaker into the on-line help
market.
Some years back, I wrote an article entitled "Thoughts
About On-Line Help", which is still
Thanks.
How do you see the "Set up print rtf project" dialog after the first setup?
It seems to show once, and then disappear.
I have looked through the manual enough to get my frame to go to word, but the
word version is still 30 percent bigger than the frame, so it does not look
like the
On Tue, 25 Apr 2006 19:13:15 +, obair81 at comcast.net
wrote:
>Thanks.
Quite welcome!
>How do you see the "Set up print rtf project"
>dialog after the first setup?
>It seems to show once, and then disappear.
Right, if there is already a mif2rtf.ini, it doesn't
overwrite it, as that could
I have a three-column index with three entry levels. (I cannot use only
two levels - I have gone over this with an indexing guru - sigh!) Anyway,
The first level is not indented, the second level is only slightly
indented beneath the first and the third level is slightly indented
beneath the
Hi Tammy,
Change the separator to use a nonbreaking hyphen instead of a regular
hyphen. This is in your IX reference page. You'll find something like this:
<$chapnum>-<$pagenum>
in the IndexIX line.
Change the hyphen to a nonbreaking hyphen.
Regards,
Sarah
Tammy.VanBoening at jeppesen.com
Hi Tammy,
Use a non-breaking hyphen as the separator in your page numbers. Then the
whole page number will break together.
Rick Quatro
Carmen Publishing
585-659-8267
www.frameexpert.com
>I have a three-column index with three entry levels. (I cannot use only
> two levels - I have gone over
Well, you can keep the 2-part page number from breaking in the
middle by using a non-breaking hyphen as the separator character.
The entry would still break across lines, but at least the break would
be more logical.
And you might also decrease the space between the entry text
and the page
Rick and Sarah and Fred,
Thanks! I made the hyphen a nonbreaking one (had to get the search term
right though in Framemaker to figure out how - nonbreaking, not
non-breaking! :-) And yep, Fred, as per comment,
And you might also decrease the space between the entry text
and the page number;
Hi, Tammy:
At 2:42 PM -0600 4/25/06, Tammy.VanBoening at jeppesen.com wrote:
>I have a three-column index with three entry levels. (I cannot use only
>two levels - I have gone over this with an indexing guru - sigh!) Anyway,
>The first level is not indented, the second level is only slightly
At 11:41 AM -0700 4/25/06, Daniel Emory wrote:
>WHAT I PROPOSE INSTEAD is that Adobe provide a new
>version of FrameMaker that includes (in addition to
>all the existing link types) the new types specified
>in the XLink standard, and also provide an upgraded
>version of Acrobat that can, when a
Hello,
Does anyone know how to override missing fonts?
Here is my issue: When opening a file, FM gives me the missing font/will be
reformatted message. I click OK. The document is automatically reformatted.
I save and close. When I open the doc again, I get the missing font message.
The
40 matches
Mail list logo
