Hi,
I'm working on a problem with Apache 2.2 + PHP on FreeBSD 6.1 x86
Recently, we've upgraded from Apache 1.3 to v2.2 , and since then PHP is unable
to resolve hostnames unless they're specified in /etc/hosts . The error we'd
get would be:
php_network_getaddresses: getaddrinfo failed:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of FreeBSD
Sent: July 24, 2008 5:41 PM
To: darko gavrilovic
Cc: User Questions
Subject: Re: connecting to a secured Windows 2003 terminal server
Dear Darko
Thanks for your mail.
To answer
Hi,
When using software based RAID controllers (e.g. ICH9R) in RAID-1 scenario, if
any of the drives fail and the server reboot, the system will not come back up.
This has been observed on FreeBSD 6.3-RELEASE i386 with following error:
Fatal trap 12: page fault while in kernel mode
fault
I bought a second hard drive for my computer since my /usr
partition
was getting full. I don't want to deal with hardware raid since I
don't want to be dependent on a certain hardware vendor or
chipset, so
I'm wanting to go with geom. I'd prefer to not have to
backup all my
Please clarify these :
(1) Is iSCSI initiator not currently implemented for FreeBSD ?
(2) There is no iSCSI target daemon currently ?
Check this post, it has step by step instructions for 6.x:
http://www.southernledger.com/blogs/ee99ee/?p=33
Hi,
I'm trying to upgrade from 5.4 i386 to 7.0 latest release. But I'm having a bit
of problem with the upgrade for some reason.
This is what has been done so far:
- deleted /usr/src/*
- cvsup -g -L 2 to RELENG_7_0 src-all
- deleted /usr/obj/*
- in /usr/src make clean
The error occurs when
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Kevin Oberman
Sent: April 16, 2008 6:03 PM
To: [EMAIL PROTECTED]
Subject: ICH7R RAID1 support?
Can anyone confirm whether support for RAID1 on the ICH7R is
in FreeBSD?
--
R. Kevin Oberman,
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Andy Christianson
Sent: March 21, 2008 7:28 PM
To: freebsd-questions@freebsd.org
Subject: Console Random Text
Hello everyone,
I am having a very strange problem. My sever stopped
hi ...
i have a simple RAID question(s).
this is from the dmesg of a newly installed bsd7:
ad4: 238475MB Seagate ST3250310AS 3.AAA at ata2-master SATA150
ad6: 238475MB Seagate ST3250310AS 3.AAA at ata3-master SATA150
ar0: 238472MB Intel MatrixRAID RAID1 status: READY
ar0: disk0 READY
Hello,
Anyone know if Intel 5000V chipset with ESB2 SATA 3.0 onboard
RAID is supported on FreeBSD 6.2/6.3/7 ?
Last time I've checked on 6.1 it didn't work in RAID mode.
Thanks,
Tamouh Hakmi
For anyone interested to know, FreeBSD 6.3 AMD64/i386 appears to support the
onboard
Hello,
Anyone know if Intel 5000V chipset with ESB2 SATA 3.0 onboard RAID is supported
on FreeBSD 6.2/6.3/7 ?
Last time I've checked on 6.1 it didn't work in RAID mode.
Thanks,
Tamouh Hakmi
___
freebsd-questions@freebsd.org mailing list
FYI for anyone experiencing issues with Dell RAID.
It come to my attention that Dell 2950 have issues with RAID
controllers while used with some hard drives under Linux.
Basically RAID configured hard drives are failing at rapid speed.
Details:
--
M8033
Hi
While running make installworld my computer crashed. (FreeBSD
6.2-p9 kernel) At this moment the system misses some of the
elf libs. Running in single user mode and running make
installworld again gives all kind of errors
Any leads to solve this problem??
Jack Raats
PS.
Derek Ragona wrote:
At 09:00 AM 11/14/2007, Barnaby Scott wrote:
I suspect I already know the answer to this, which is that the
trouble I am having is nothing to do with the OS at all,
but I have
to ask, because I am otherwise up against a total brick wall!
I bought a
Hello,
I've tried patching the latest openssl on FreeBSD 6.1 as per:
http://security.freebsd.org/advisories/FreeBSD-SA-07:08.openssl.asc
However, the patching fails mainly due to some problems with the patch on line
1162 , and I can't seem to find out the reason for it. This had failed on
Anyone have tried the patch and experiencing the same issue ?
I applied it to 3 6.2-STABLE machines today worked flawlessly.,
You are using a /usr/src version that it _is_ supposed to
apply against right?
Whats the $FreeBSD$ of the file it fails in. it should be
1.1.1.12.6.2
Robin Becker wrote:
My collocation supplier is about to move our FreeBSD box and wants
some way to shut it down cleanly. Is there a simple way to allow a
non-root user to have shutdown rights without just giving them the
world. At present I don't even allow login via ssh on that
Hi all,
During FreeBSD 6.2 installation, the process failed because
of errors like the one below:
READ_DMA UDMA ICRC error LBA=37505132
I managed to install by setting hw.ata.ata_dma=0 at boot time
but the same errors occur after installation and at boot time
so I had to put
Hi,
I've seen this question asked couple of times before but couldn't find a
resolution for it. I'd appreciate any help on this subject.
I'm looking into getting a Supermicro board X7DVL-I which uses Intel chipset
5000V and has integrated RAID through Intel ESB2 SATA 3.0Gbps Controller (Intel
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brent
Sent: August 11, 2007 7:21 AM
To: [EMAIL PROTECTED]
Subject: server was hacked
Im running FBSD 5.4 as a web server the server is behind a
cisco firewall /router and the server has alot of
I have a Promise Fasttrak TX4200 running a single mirrored
array under 5.5.
Everything's been great for nearly a year until a recent reboot. It
appears that the two disk mirrored array is coming up as two arrays
with a single disk attached:
Before:
kernel: acd0: CDRW SONY CD-RW
Hi!
A machine of mine is panicking during cold boot on FreeBSD
6.2-RELEASE-p6. No kernel dump is available, as the panic
occurs so early.
My machine is an Athlon XP 2000+ on an ECS K7S5A-Pro (SIS735
chipset) with 1GB PC3200 RAM.
The root filesystem is a mirror on a 3Ware Escalade
Hello,
Since people were talking about modifying kern.hz , I went the extreme and
added kern.hz=10 to loader.conf , obviously the system didn't load properly.
It panics during boot process.
This is 5.4-Stable, I've tried all other boot modes and the only option
available is Escape to Loader
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
Kevin Kinsey
Sent: Sunday, May 20, 2007 3:19 PM
To: Anton Galitch
Cc: [EMAIL PROTECTED]
Subject: Re: just general questions about fbsd
Anton Galitch wrote:
Hi
Im writing an
After a recent disk failure, I left myself a note to add the
DNS/DHCP info to my backup.
I have a small, over-engineered for my education, network of
10 computers in my house. I run BIND with dynamic zones on
my FreeBSD server, I also use the DNS service on my Win2k-AD
server.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Marc G. Fournier
Sent: April 10, 2007 3:12 PM
To: Derek Ragona; freebsd-questions@freebsd.org
Subject: KVM over IP (Was: Re: adding keyboard after reboot
with no keyboard) ...
-BEGIN PGP
Sally,
On 3/22/07, Sally Janghos [EMAIL PROTECTED] wrote:
I'm looking for some suggestions on where to start troubleshooting
performance issues on a Intel PRO 1000 card.
It's installed in a box with the following configuration:
FreeBSD 6.1
AMD Athlon(tm) XP 2100+
On Mon, Mar 19, 2007 at 10:39:18AM -0700, Chuck Swiger wrote:
On Mar 19, 2007, at 7:54 AM, Marcelo Maraboli wrote:
my / partition has only 73.196 Mbytes available and since I have
22.000 users, I now cannot change anyone?s password..
[EMAIL PROTECTED]:~$ passwd marcelo.maraboli
Hi everyone,
I'm still having an issue with the new daylight saving-
I ran tzsetup entered the appropriate zone- but when I reboot
the machine it still in the old time zone-
Is there a patch for freebsd 5.4
Paste the results of:
zdump -v /etc/localtime | grep 2007
date
First off, I want to thank the people who responded to my
thread Stability Issues on a 5.4-RELEASE box a couple of
weeks ago; after disabling hyperthreading, getting a clean
run of Memtest back, and doing some serious fsck'ing of the
disks, the box appears to now be completely stable.
I've been trying to run 4.x binaries on FreeBSD 6.2; with the
compat4x package (and/or port) installed.
However, the 4.x binaries want to find libc.so.3, which
doesn't seem to be anywhere around.
Anyone know the trick to getting this to work?
- Thanks -
- Dave
Hi,
I have had this server running for 6 months now with no problems. Just today
I've noticed the system began to freeze or hang with weird things on the
console (attached gif file).
The system is running FreeBSD 6.1-STABLE-200609 i386 with 2GB DDR RAM
(Kingston) and 2.8GHz CPU
There are no
NOTE: I'm not subscribe to the FreeBSD.org mailing list,
please CC to me as well
We're ordering Dell Poweredge 2950 Server which is come with
SAS (Serial Attach SCSI). Most newly manufacture branded
server comes with SAS nowadays, no more SCSI. According to
Dell Technical Support, SAS
I have been blacklisted for spamming and I am attempting to
ascertain the source.
I have a few networked windows boxes which route through a
FBSD server. I also have around ten off-site users who send
mail via my port
26 - using smtp password authentication. How do I determine
which
Hi,
I have an IBM xSeries 225 with two-processor motherboard,
currently with only one Intel Xeon 2.4 GHz. OS is 6.1p10,
otherwise is this an apache22-mysql50-php5 web server.
I would like to add an additional, second Intel Xeon 2.4 GHz.
Do I have to change anything in OS, kernel,
Hello,
A Snap Server 1100 just died on me... (Single drive,
FreeBSD-based, I think...)
I think it's not HD related as I can't even get into to the
hardware/bios reset mode.
Have you folks ever heard of anyone opening one of these
things up and mounting the drive on a regular
Hello!
I've bought a small server with Intel SE7230NH1 motherboard,
which incorporates the ICH7 SATA RAID controller. Using the
LSI BIOS utility, I created a RAID1 array of two disks and
installed FreeBSD 6.2-RC1
(amd64) on it.
atapci1: Intel ICH7 SATA300 controller port
I just installed 6.1 on a new laptop (Dell XPS M1210). It has
a 2Ghz Intel Core2 Duo processor and two gigs ram. Every time
it gets to the part in the bootup where you have to type a
bunch of random junk it goes into a reboot. It's not an
abrupt reboot. FreeBSD does show it is
Dear bsd people,
I have this amd64 system running freebsd 6.1 with 1 GB of RAM
and everything worked very well. Then I've added some more
ram, 2 gb extra, to be precise and aft first it seemd
everything worked fine. I could load larger files and my java
apps didn't give me out-of
Hi,
are there any issues known with the FastTrak100
RAID-Controller? I'd like to run it in HW RAID-1 and setup
FreeBSD 6.1 onto that RAID-Volume.
Thx in advance, cheers
-Martin-
Have a server running it for couple of months so far with no issues (knock on
the wood)
Tamouh
In recent 6.X versions, you can use 'S' to show system threads too.
For an even more fine-grained view, you can use 'H' to show
each thread separately.
Then there is also the 'CPU' mode (as opposed to the default 'WCPU'
mode of top).
I've the same issue with FBSD 5.4 and TOP. In
Hello!
Does anybody run a webhosting business, where they've written
a simple Bash script to add new users to the system and set
up their domains, Apache virtual hosts, databases etc. all in one go?
I am looking for inspiration for my own script.
Thank you!
I truly wish to keep
Does anyone know of a script (or application) to
automagically add a
host to a dns blacklist? It would be very convenient to blacklist
all the e-mails sent from a spammer to a honeypot address, or to
blacklist all senders that thunderbird moves into the spam
sub-folder.
But since running 5.x (5.5-STABLE since 1st Aug) top can show
0.0% idle but the cpu usages shown don't add up to much of a
fraction of 100%.
For a typical illustration: 'make index' has been running for
hours, and here's a shot of 'nice top', o)rdered by cpu,
showing S)ystem procs:
For those of us who can't read minds, what's the port to
install, and the website where we can view the stats? :)
___
It is http://bsdstats.hub.org
___
freebsd-questions@freebsd.org mailing list
I've been doing some thinking on it this afternoon, and think
I've figured out about the simpliest way of doing it ... it
still doesn't deal with fakers and such, but, IMHO, I don't
think that that is a *huge* problem that needs to be
addressed ... some might do it for a lark, but,
just a snip of my top window, but as far down as i can
stretch my 1280x1024 screen, its all cpu 0 processes, even
while compiling.
last pid: 16214; load averages: 0.75, 0.35, 0.17up
1+00:37:34
09:43:04
114 processes: 2 running, 112 sleeping
CPU states: 34.2% user, 0.0%
On Sunday 30 July 2006 13:36, Tamouh H. wrote:
do a check to make sure HT is enabled:
sysctl -a machdep.hyperthreading_allowed
oops... we have definatly found my problem.
[EMAIL PROTECTED] ~]# sysctl -a machdep.hyperthreading_allowed
machdep.hyperthreading_allowed: 0
what do i
After loading ichsmb, smbus and smb, dmesg reports:
ichsmb0: Intel 82801DC (ICH4) SMBus controller port
0x1880-0x189f irq 10 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: System Management Bus on ichsmb0
smb0: SMBus generic I/O on smbus0
Then, mbmon -d -S gives:
Hi,
Is there a tool that shows how many times a process has read / written to disk
? Preferred in a TOP style.
Thx,
Tamouh Hakmi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Jul 25, 2006, at 8:16 PM, Nikolas Britton wrote:
ICP Vortex is an Adaptec company and Adaptec doesn't
support FreeBSD.
We've already been over this once.
Not to disagree with you, but Adaptec put new drivers for 5.3
and 5.4 for their 2420, 2820, 2320SLP, 2130SLP, and
Hey,
I have a couple Adaptec 2410SA Raid cards (aac driver) and I
was wondering if anyone has had any luck with being able to
hotswap drives in FreeBSD 6?
If the Adaptec card is no good for hot swapping under
FreeBSD, what's the recommended brand?
Thanks
Daniel
I've 2230SLP which
Hey,
I have a couple Adaptec 2410SA Raid cards (aac driver) and I was
wondering if anyone has had any luck with being able to hotswap
drives in FreeBSD 6?
If the Adaptec card is no good for hot swapping under FreeBSD,
what's the recommended brand?
Thanks
Daniel
On Sunday 23 July 2006 18:10, Tamouh H. wrote:
Beautiful! That did the trick.
adding to the kernel:
device ichsmb
device smb
device smbus
device intpm
and then installing mbmon from source fixed it!
out of curiosity and for the sake
Hi, nothing special. But for smb support, I mean compile it
into the kernel. Try adding
device ichsmb
device smb
device smbus
device intpm
to your kernel and then see if mbmon picks up the info.
---Mike
Thx Mike, no luck there
At 01:20 PM 23/07/2006, Tamouh H. wrote:
sonata# mbmon -d
ioctl(smb0:writebyte): Device not configured
Actually, try building mbmon from source and not from the ports.
---Mike
Beautiful! That did the trick.
adding to the kernel:
device ichsmb
device smb
Hello,
I have a machine that I've been monitoring for strange reboots. The machine is
hardly ever used, in fact it sits idle 99.9% of the time. When a hardware
failure occurs, does FreeBSD still records 'reboot' in the last command ?
All the sudden at no specific intervals, the machine
Hi,
I've an Intel board D865GVHZ running on FBSD 5.4 that I'd
like to monitor its temperature. I've tried using lmmon , but
the data are way off:
I have an 865GCH. You might be able to get it via acpi
% sysctl -a hw.acpi.thermal.tz0.temperature
hw.acpi.thermal.tz0.temperature:
Tamouh H. wrote:
Hi,
I've an Intel board D865GVHZ running on FBSD 5.4 that I'd
like to monitor its temperature. I've tried using lmmon , but
the data are way off:
Motherboard Temp Voltages
255C / 491F / 528KVcore1: +3.984V
OK so a good customer of long standing wants a coldfusion website.
Some developer, the husband of one of his staff (so that
makes him a trusted advisor, right?), has convinced him it's
the only way to do it.
My position is maybe that's the only way -he- can do it but
there's a whole
Hi,
I've an Intel board D865GVHZ running on FBSD 5.4 that I'd like to monitor its
temperature. I've tried using lmmon , but the data are way off:
Motherboard Temp Voltages
255C / 491F / 528KVcore1: +3.984V
Vcore2: +3.984V
Fan Speeds
On Jul 13, 2006, at 9:22 AM, Danial Thom wrote:
Simply enabling SMP on a single processor system adds 20-25%
overhead in freebsd 6.1. Again, readily admitted/accepted by the
developers.
There is no way to recover that in efficiency, at least not for a
long time.
So don't
Tamouh H. wrote:
Hi,
I'm seeing the following messages in /var/log/messages and am
concerned about the integrity of the hard drive:
ad0: WRITE command timeout tag=0 serv=0 - resetting
cd9660: RockRidge Extension
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: READ
Hi,
I'm seeing the following messages in /var/log/messages and am
concerned about the integrity of the hard drive:
ad0: WRITE command timeout tag=0 serv=0 - resetting
cd9660: RockRidge Extension
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: READ command timeout tag=0
Olivier Nicole wrote:
2) as there are many connections comming from search engines siders
(90% of all the established connections), I'd like to limit the
ressources that spiders are using. One way would be through IPFW,
but are there better ways? Is there a way to
I'm diagnosing a slow hard disk issues , trying to determine where the
bottleneck in all of this. The system is FreeBSD 5.4 with SCSI U320 drives in
RAID-5 on Adaptec 2130SLP Controller.
I'm noticing the / boot partition has the most activities for writes/Busy and
was wondering if anyone can
ware vendors starting to bail on FreeBSD ... ?
On 6/21/06, Marc G. Fournier [EMAIL PROTECTED] wrote:
b. are ppl actually using/promoting SATA drives in a server
environment?
Or are we just talking about situations where you have
a large number
of spindles to work with? My
In the last episode (Jun 22), Matt Ruzicka said:
We've got a couple servers that appear to have particularly
busy disks
and I was trying to determine if there is a way to more easily poll
this data for tracking.
I'm not sure if this is one of those can't see the forest for the
1) With the Promise controller, after simulating a disk
problem (shutdown - disk disconnection - reboot - shutdown -
disk reconnection - reboot), I wasn't able to rebuild the
array at all, either with atacontrol rebuild ar0 or from
the bios. I suspect a spare disk is necessary for a
On Jun 19, 2006, at 10:12 AM, Elliot Finley wrote:
Port: aaccli-1.0
Path: /usr/ports/sysutils/aaccli
Info: Adaptec SCSI RAID administration tool
Maint: [EMAIL PROTECTED]
B-deps:
R-deps:
WWW:http://support.dell.com/
Never tried it but it looks like your best
Hi,
I noticed Adaptec now appears to have finally released drivers for FreeBSD 5.x :
http://www.adaptec.com/en-US/downloads/unix/freebsd?productId=SAS-4800dn=Adaptec+Serial+Attached+SCSI+RAID+4800SAS
Any comments on compatibility, issues or performance with these drivers ? I'm
tempted to try
Im very new to this and have some questions,Im looking for an operationg system
to replace windows Xp on my computer.My computer has a celeron processor and
512 megabytes of memory.Is this enought to run freeBSD ?.And also,I have many
applications,will they be compatible with freeBSD or will
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adam M
Sent: June 1, 2006 8:04 PM
To: freebsd-questions@freebsd.org
Subject: Adding as a second hard drive
Yes, I was wondering what the best way was to add a second hard drive to my
existing FreeBSD
Curiously, I just restarted sshd, and now things are working again.
Has anybody ever seen this before?
-Andy.
We had problems as well with FreeBSD 4.11 and sshd service hanging or breaking
because of an OPENSSL lib which are required to run OpenSSH. Since then we
moved out of 4.11 to 5.x
Did you use a 80- or 40-ATA cable?
If you've configured your drives to do UATA-66 or faster then
FreeBSD (or any other OS for that matter) will crash if
you connect a
second drive...
This is new one to me! I guess my 3 x UATA-100 are super drives of some sort
not to crash!!
I have a number of servers that are reaching end of life.
They are over 7 years old and I can no longer find IDE drives
that work with the slower controllers they have. These are
all towers and use ASUS motherboards. Those were quite cheap
at the time and the boards have worked
It seems the AAC_COMPAT_LINUX kernel option that I needed to
run aaccli for an Adaptec RAID card (2120s) is no longer
available in 5.3. Is there a replacement, or another way to
run aaccli?
Thanks,
sdb
--
[EMAIL PROTECTED]
You don't need the AAC_COMPAT_LINUX option enabled. Do you
If I were going to run RAID-1, I would pick two disks of the
same size but different brands (Samsung and Hitachi 250Gb
say). If you buy two disks of the same brand at the same
time from the same supplier, it always seems to me that you
increase the chance that a) they come from the same
What brand / make / model ATA / SATA hard disks do you prefer?
I am looking to purchase some SATA disks in the 160 - 300GB size.
I got a good deal (I think) on a Samsung OEM 250GB disk for
$95 at my local MicroCenter, but read on the web a few days
later one gamer / system builder /
Tamouh H. wrote:
Micah, Kris:
You guys are hilarious, where can I find ppl like you ?
Of course I'm using a backup power, but there are 101
reasons for FreeBSD to reboot by itself and when that
happens, 30 minutes downtime is 30 minutes of wasted time.
Since you're *so
I'm a newbie to unix and freebsd. I'm trying to follow your
documentation and keep failing the install. I have an HP
COmpaq desktop dc5100 MT and it will NOT detect my iso image
for the i386. i did not see it in your hardware list.htm.
does that mean it's not supported or do i need new
Ensel Sharon wrote:
I have disabled background fsck in my /etc/rc.conf with:
background_fsck=no
But I am curious - what does this mean for the system if the system
crashes ?
Does this mean that the system will wait for all non root
partitions
to fully fsck before
Tamouh H. wrote:
Ensel Sharon wrote:
I have disabled background fsck in my /etc/rc.conf with:
background_fsck=no
But I am curious - what does this mean for the system if
the system
crashes ?
Does this mean that the system will wait for all non root
partitions
Hi all,
I have been pestering everyone who will listen on this, and
have yet to find a solution ... so here goes again!
I have a FreeBSD system on a Dell PE 1850 that has been
randomly freezing up from time to time in the past two weeks.
Firewall is enabled, but is very solid as I
On Saturday 04 March 2006 12:43 pm, David LeCount wrote:
I see no SCSI adaptor messages whatsoever. Upon boot, it
goes directly
from the BIOS post message to the FreeBSD boot manager. I tried
hitting ctrl c
that doesn't sound good to me! Either your SCSI adapter is
busted or not
Hi,
This is on FreeBSD 5.4 latest stable snapshot on January.
I've followed the instructions at:
http://www.onlamp.com/pub/a/bsd/2005/11/10/FreeBSD_Basics.html for creating
software RAID, which appears to have been successful. the raid created, and
synched, couple of reboots all is good.
So
Alex de Kruijff mailto:[EMAIL PROTECTED] wrote:
On Thu, Feb 16, 2006 at 01:46:19AM -0600, Mike Loiterman wrote:
Afte being up for more than two months, I just noticed that my ver
reliable and stable server mysteriously rebooted. I've
had the same
hardware and system setup for more
Well, the server is an email/web server primarily. Not a
huge load, but I want to be hardened against DOS
attacks...would these help?
If you are looking to harden your server, this might be helpful. Though a bit
outdates, it still holds true for most part:
I've been able to run couple of successful tests installing
FreeBSD 4.x and 5.x on Microsoft Virtual Server 2005 ,
however, I've noticed for some reason FreeBSD is not
detecting the actual CPU speed:
---
FreeBSD 5.4-STABLE #0: Mon Jan 30 22:32:31 EST 2006
Hi,
I've been able to run couple of successful tests installing FreeBSD 4.x and 5.x
on Microsoft Virtual Server 2005 , however, I've noticed for some reason
FreeBSD is not detecting the actual CPU speed:
---
FreeBSD 5.4-STABLE #0: Mon Jan 30 22:32:31 EST 2006
[EMAIL
Hi,
When trying to add a new partition to an already existing disk slice on FreeBSD
5.4, are these the proper procedures to follow:
lets say we have:
/dev/ad4s1a507630 56104 41091612%/
devfs 1 10 100%/dev
/dev/ad4s1d507630 12
Yes. Between steps (8) and (9) you should have created a
filesystem on that device:
# newfs /dev/ad4s1g
Then you can mount it as usual:
# mount /backup
Thanks Giorgos, however, I think the HandBook failed to mention these two steps
which led me to think they're not
Hi Robert,
Do CVSUP on all your ports, this will upgrade the package tools. Funny to ask
because I just had this problem today.
For info on how to use CVSUP and upgrade ports:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html
Tamouh
Trying to 'portupgrade
Hi all,
I upgraded a 5.3 system to 5.4 both with SMP kernels, I'm
running 6 jails on a dual xeon 1.26 hp rackmount. When apache
(both 1.3 and 2.0) is being used heavily the system panics.
With a 5.4 GENERIC kernel or a 5.3 SMP kernel this behaviour
does not happen and the system is
Hello,
I've just ran Bonnie on a FreeBSD 5.4 machine with Adaptec 2230SLP RAID-5 SCSI
Card and Seagate 146GB 10K RPM U320 drives.
The results were very surprising. The RAID-5 is EXTREMELY slow, and I can't
figure out why!
The RAID controller has two volumes: RAID-5 and a lone drive.
This
On another note, I've ran diskinfo test and these are the results, much better
but still the RAID-5 slower than a single drive:
impala# diskinfo -t aacd1
aacd1
512 # sectorsize
146781044736# mediasize in bytes (137G)
286681728 # mediasize in sectors
Just get a different sound card. There are lotsof
inexpensive sounds cards that are probably supported by
FreeBSD for just a few (10-30) $
Btw, this problem happens with Windows, Mac OS X, etc as
well. I have been trying to put an extra USB/Firewire card
in my G5, and they work, but
That or the user(s). Microsoft doesn't write any sound card drivers, they
make
manufacturers do it then pay and beg to be included on the master
distribution CD/DVD.
For a device to work in FreeBSD someone who wants it bad enough to do the
work has to have the skills and want it bad enough to do
I have a bunch of FreeBSD servers to manage, and I'm wanting
to find a device that lets you SSH/telnet in, and access the
servers connected to it via serial cables. I know such a
device exists, but it was a long time ago since I last saw
one, and I'm not really sure what one of these would be
On 12/15/05, Mike Esquardez [EMAIL PROTECTED] wrote:
i have to install a server that will host a test drive of
a web app
on the internet. from my inital look at the app, it looks
like it will
be a target to be exploited. i am not involved with the
code so fixing
it is not an option.
1 - 100 of 112 matches
Mail list logo
