>
> in which directory in ports i can find windowmaker?
>
>
man whereis
man find
whereis windowmaker
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
also man locate and cd /usr/port && make search key=windowmaker
Cheers,
Mark
On Wed, 2003-07-23 at 17:01, Scott Muller wrote:
> >
> > in which directory in ports i can find windowmaker?
> >
> >
>
> man whereis
> man find
>
> whereis windowmaker
>
>
On Wednesday 23 July 2003 05:48, Antoine Solomon wrote:
> I am having problems building and installing kde3.1.2 from the ports
> collection Here is the error that I get
>
> checking for libXext... no
> ===> Script "configure" failed unexpectedly.
> Please report the problem to [EMAIL PROTECT
- Omar
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Tue, Jul 22, 2003 at 04:33:32PM +0200, Rus Foster wrote:
> Hi All,
> Is there a program in ports which can stream MP3 but also has a web
> interface so I could skip songs, rewind etc?
>
You could try /usr/ports/www/p5-Apache-MP3 .
Karel.
___
[EMAIL PR
Solved this one on my own. If I'd bothered to test using the tftp client
I would have noticed it was actually was running. Due to the fact it
doesn't show as a process I'd just assumed it wasn't running forgetting
it falls under inetd.
Sorry for the question :)
Nelis
-Forwarded Message-
I thought I had answered this before, but AFAIK, dump just doesn't support
multiple volumes. You'll either need to get a higher capacity tape drive,
resize your partitions, or use another backup utility.
- Original Message -
From: "Bob Collins" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
On Tuesday, Jul 22, 2003, at 19:23 US/Pacific, James Dietrich wrote:
Sorry if this post is a litte off-topic. I am trying to set up an old
DOS laptop as a terminal to my FreeBSD firewall/nat box. Has anyone
come across good (read: free) terminal emulation software for DOS? If
so could you po
On Tue, 22 Jul 2003 08:12 am, Stephen G Smith wrote:
> I am running FreeBSD 5.1-RELEASE, and I want to add firewall support to
> my kernel. So, I carefully read and followed the instructions in section
> 9.3 of the FreeBSD Handbook. But when I run "make depend" i get this
> error:
>
> cc: installat
Hi List,
I should probably consult the mod_php mail list for this but I thought
I'd try my luck here first since this is on FreeBSD 4.7 and I've had
pretty good responses before from this list.
I see now mod_php now requires XFree86 libraries ? I am not using X on
this machine...
Anyway, I'm upd
Hi,
While installing mysql on freebsd5.0 (scripts/mysql_install_db) i
encountered the following error:
-
Installing all prepared tables
/usr/libexec/ld-elf.so.1: Shared object "libc_r.so.4" not found
Installation of grant tables failed
How can i get rid of this problem.
Thanks
anil.
On Wednesday 23 July 2003 12:18 am, Andy Fawcett wrote:
> On Wednesday 23 July 2003 05:48, Antoine Solomon wrote:
> > I am having problems building and installing kde3.1.2 from the
> > ports collection Here is the error that I get
> >
> > checking for libXext... no
> > ===> Script "configure" fail
"Karel J. Bosschaart" <[EMAIL PROTECTED]> writes:
> On Tue, Jul 22, 2003 at 04:33:32PM +0200, Rus Foster wrote:
> > Hi All,
> > Is there a program in ports which can stream MP3 but also has a web
> > interface so I could skip songs, rewind etc?
> >
gnump3 or ample (both in /usr/ports/audio)
--
On Sun, Jul 20, 2003 at 10:52:51PM +0300, Alin-Adrian Anton wrote:
> Hi guys,
>
> anyone knows if this "*SMC - 2402W" *is supported by FreeBSD? I am going
> to buy 2 x wireless cards. If any other are better supported or one
> knows that they work well, please tell me, so I can buy the right one
Hi, dear All!
as usual, before the kernel begins to load it waits for your pushing
for 10 seconds (by default). so you just push , then, when you see
prompt "ok", type "boot -s". The kernel must load, then you'll be asked
about the shell you want to get into "/bin/sh", just push and then
type "
> Hi,
Hi,
>
> While installing mysql on freebsd5.0 (scripts/mysql_install_db) i
> encountered the following error:
> -
> Installing all prepared tables
> /usr/libexec/ld-elf.so.1: Shared object "libc_r.so.4" not found
> Installation of grant tables failed
>
What mysql did you insta
> Hello:
Hi,
> I'm trying to configure both a master and slave DNS on the same
> machine. My approach is to run the master by setting named_enable="YES"
> and it will use the config file in /etc/named. To start the slave I
> will In rc.local and it would use the config files in /etc/named/slave.
- Original Message -
From: "Adam" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 22, 2003 11:36 PM
Subject: Re: Apache help
> On Mon, 2003-07-21 at 16:33, Dzevad Fazlic wrote:
> > I just installed freeBSD 4.8 with apache 1.3.27
> > Everthing works perfect but when i sh
Hello,
I have an NE2000 (10M) compatible isa card with
io=0x300 irq=5 (under win98).
But I fail to drive it under a FreeBSD 4.8. I have
recompiled kernel with ed
support. dmesg does not contain recognition message
and
kldstat -v |grep ed gives:
pci/ed
145 isa/ed
bash-2.05b$ pkg_info | grep -i windowmaker
wmtop-0.84 Windowmaker dock app to display
top 3 CPU consuming process
bash-2.05b$ windowmaker
bash: windowmaker: command not found
why wont windowmaker run? i did install the packaged,
as you can see. i hope anyone got a tip.
thanks
_
yOn Wed, 23 Jul 2003, marlon corleone wrote:
> bash-2.05b$ pkg_info | grep -i windowmaker
> wmtop-0.84 Windowmaker dock app to display
> top 3 CPU consuming process
> bash-2.05b$ windowmaker
> bash: windowmaker: command not found
>
>
> why wont windowmaker run? i did install the packaged,
Hi,
there is a gw on 100mbit bandwidth, and interrupt is
damn high on it even though the bandwidth utilization is only
about 20%, and it is an AMD 2Ghz machine with 0,5Gb of DDR Ram
though the network card is a D-Link DL10050 (one pci card
with 4 ports), so maybe this is the problem, you will let
Well, the pkg_info should display something like
windowmaker-0.80.2 GNUStep-compliant NeXTStep window manager clone
and the command is /usr/X11R6/bin/wmaker
wmtop is just an app that docks under Windowmaker. You want to
install /usr/ports/x11-wm/windowmaker.
Cheers,
-Jhon
marlon corleone wro
Greetings all:
I am connecting to my isp with the following ppp.conf using the command
>ppp -auto isp
when i run the command i usually connect on the second try.
for some reason the connection drops after the first try, but my
true problem is i can ping internal ips and not ips outside the networ
Hi,
I have a notebook Satellite 3000-214, and now I want to install the
freeBSD SO, together with windows XP that came with my notebook. I made a
partition to install the new SO, and I with the FreeBSD install program I
made
the swap and FS partitions. I manage to install the system, but th
Hello.
I'm about to install a new machine which will have 2 IDE-disks. I'd like to
mirror some volumes between those disks while other volumes should be
striped.
I'd like to do this with FreeBSD 5.1.
There's no data on the disks that I want/have to keep. Is it at all
possible to configure Vinu
On Wed, 2003-07-23 at 08:29, marlon corleone wrote:
> bash-2.05b$ pkg_info | grep -i windowmaker
> wmtop-0.84 Windowmaker dock app to display
> top 3 CPU consuming process
> bash-2.05b$ windowmaker
> bash: windowmaker: command not found
>
>
> why wont windowmaker run? i did install the p
On Wed, 2003-07-23 at 09:10, Brian Henning wrote:
> I am connecting to my isp with the following ppp.conf using the command
> >ppp -auto isp
> when i run the command i usually connect on the second try.
> for some reason the connection drops after the first try, but my
> true problem is i can ping
On Wed, 2003-07-23 at 08:29, marlon corleone wrote:
> bash-2.05b$ pkg_info | grep -i windowmaker
> wmtop-0.84 Windowmaker dock app to display
> top 3 CPU consuming process
> bash-2.05b$ windowmaker
> bash: windowmaker: command not found
>
>
> why wont windowmaker run? i did install the p
On Wed, Jul 23, 2003 at 12:05:34PM +0200, Nelis Lamprecht wrote:
> I should probably consult the mod_php mail list for this but I thought
> I'd try my luck here first since this is on FreeBSD 4.7 and I've had
> pretty good responses before from this list.
>
> I see now mod_php now requires XFree86
Don't know much about bash, but do you need to update your shell's path?
For instance, running "rehash" under csh will tell the shell to
update its list of executables found in the path.
HTH
Michael
On Wed, 2003-07-23 at 08:32, Rus Foster wrote:
> yOn Wed, 23 Jul 2003, marlon corleone wrote:
>
[ removed freebsd-isp@ from CC-list ]
> > yOn Wed, 23 Jul 2003, marlon corleone wrote:
> >
> > > bash-2.05b$ pkg_info | grep -i windowmaker
> > > wmtop-0.84 Windowmaker dock app to display
> > > top 3 CPU consuming process
> > > bash-2.05b$ windowmaker
> > > bash: windowmaker: command not
At 2003-07-23T13:51:28Z, Eivind Olsen <[EMAIL PROTECTED]> writes:
> There's no data on the disks that I want/have to keep. Is it at all
> possible to configure Vinum and then install FreeBSD or will I have to
> install FreeBSD first and then "convert" to Vinum-volumes by manually
> editing the dis
Hello.
I've got a production server which keeps crashing if I use bpfs to much.
I usually only use bpf0 for dhcp server, but if I start e.g. snort and ntop, the
machine will soon reboot. The same
happens if I run tcpdump.
uname -a gives:
FreeBSD x..zz 4.7-RELEASE-p9 FreeBSD 4.7-RELEA
-BEGIN PGP SIGNED MESSAGE-
~
On 23-Jul-2003, marlon corleone wrote message "windowmaker problem"
~
> bash-2.05b$ pkg_info | grep -i windowmaker
> wmtop-0.84 Win
> I am trying to use xcdroast with my ide burner but it cat see it. I
> think i need to enable scsi emulation ...well according to some links on
> google but anyway i cant find how to do this in the handbook. Would
> someone please inform on how to achieve this.
>
> Thanks in advance.
>
> ps
-BEGIN PGP SIGNED MESSAGE-
I'd like to install mod_perl from ports on freebsd, but even if I do something
as simple as 'make extract' it complains:
Error: you don't have the right version of perl in /usr/bin.
This is correct, I want to install it against the version of perl in
/usr/local
Attila Nagy wrote:
Hello,
Is this statement still valid?
"ext3 is unsafe for maildir, and with softupdates, so is ffs."
http://www.irbs.net/internet/postfix/0202/0358.html
Yes,
It's also true that any form of write-caching is unsafe, so disable
the caches on your SCSI and ATA hard drives. Simpl
Basically, if you want to ensure that email wont get lost, put the
maildirs and mail queue on separate partitions and mount them sync.
This is what I do.
If you have to speed things, try first a battery backed raid controler
and enable the write cache on it. Of course, you should always use an
Hi,
I would like to know, if it is safe to remove these files from /:
kernel.GENERIC
kernel.old
Since there is already a /kernel (which should be the current one, right?)
Version: 4.8-RC FreeBSD
Regards
Schalk Erasmus
Incredible Networks
___
[EMAIL
I assume, the same applies to /tmp directory.
What type of Maintenance is required on a BSD Server, from time to time?
Regards
Schalk
-Original Message-
From: Schalk Erasmus [mailto:[EMAIL PROTECTED]
Sent: 23 July 2003 05:05 PM
To: '[EMAIL PROTECTED]'
Subject: kernel files
Hi,
I would
Please post /var/log/ppp.log be sure to empty ppp.log before you
run last test so log only contains last 2 dials
Try starting using this command ppp -background -nat isp
Also post your /etc/rc.conf
Add this to your ppp.conf isp section
set timeout 0 # no idle time out, wi
Dear list
I am running 4.8stable and I have a problem with a USB disk on key.
When I insert it into one of the USB ports, I get the error message:
uhub0: device problem, disabling port 1
In the kernel, both da and umass are enabled.
Any suggestion?
thanks
--
Giusep
Sure you can delete those files and not hurt any thing. But they do
have purpose in FBSD. Lets say you recompile kernel and for some
reason when you go to boot new kernel it does not boot, you are
stuck. You can reboot and select the kernel.Generic or kernel.old
to bring box back to life and fix p
On Wed, Jul 23, 2003 at 11:38:44AM -0400, Bill Moran wrote:
> Attila Nagy wrote:
> >Hello,
> >
> >Is this statement still valid?
> >
> >"ext3 is unsafe for maildir, and with softupdates, so is ffs."
> >http://www.irbs.net/internet/postfix/0202/0358.html
>
> Yes,
>
> It's also true that any form o
On Tue, 2003-07-22 at 23:33, Kirk Strauser wrote:
> At 2003-07-23T03:55:47Z, Tony Sterrett <[EMAIL PROTECTED]> writes:
>
> > I'm trying to configure both a master and slave DNS on the same
> > machine. My approach is to run the master by setting named_enable="YES"
> > and it will use the config fi
Hello I have a remote machine running FreeBSD 4.8 that runs my internet
radio station (http://www.itsallgoodradio.com) and it has gone wacky. It
will be several hours before anyone can get to it to reboot it. I have a
ssh login prompt that is still live, but anytime I try to execute a
comma
Hello all,
I've been playing with the bleeding edge stuff. And so, of course,
I'm bleeding.
System is FREEBSD 5.1-CURRENT. make world aborts at:
install -s -o root -g wheel -m 444 -fschg libcrypt.so.2 /usr/lib
install: /usr/lib/libcrypt.so.2: Operation not permitted
*** Error code 71
Stop
Any pointers
FBSD 5.1 Release
Apache 1.3.28
type following command to view compiled modules
#httpd -l
and get-
Compiled-in modules:
http_core.c
mod_so.c
suexec: disabled; invalid wrapper
/usr/local/sbin/suexec
This is from a straight install of apache.
Shouldn't I be getting more info for i
On Wed, 23 Jul 2003 [EMAIL PROTECTED] wrote:
>
> Hello I have a remote machine running FreeBSD 4.8 that runs my internet
> radio station (http://www.itsallgoodradio.com) and it has gone wacky. It
> will be several hours before anyone can get to it to reboot it. I have a
> ssh login prompt that i
Anybody have arson working with a IDE Burner via SCSI emu in freebsd 5.1?
I added SCSI emulation to my kernel:
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd
On Tue, Jul 15, 2003 at 08:57:17PM +0200, Grzegorz Czaplinski wrote:
> > >That would be good to have a webpage with server configurations that run
> > >under FreeBSD. Don't you think so?
> >
> > Keeping the list of supported individual components up-to-date is a
> > significant challenge.
> >
>
--On 23. juli 2003 09:19 -0500 Kirk Strauser <[EMAIL PROTECTED]> wrote:
I've had great success with configuring an initial tiny partition as '/'
and doing a minimal installation (and I mean *minimal*, as in, there's
nothing else you can remove and still have it boot). The first step
after booting
Howdy list,
Does anyone know if it's possible to mix virtual
PCM devices? (i.e. /dev/dsp0.1, /dev/dsp0.2, etc...)
I'm trying to run XMMS at a different volume level
than my KDE SFX volume level. XMMS is using /dev/dsp0.2
and KDE is using /dev/dsp0.3.
Thanks!
--
Jesse Guardiani, Systems Adminis
--- Matthew Seaman <[EMAIL PROTECTED]>
ha scritto: > On Tue, Jul 22, 2003 at 10:04:30PM
+0200, Mica
ehi , I've tried the last version of Mozilla (1.4)
installed via Ports updated with CVSUP , and It works
perfectly with INET6 enabled . I think that mozilla
team have solved ;)
Bye
Marcello
>
Unless you have a different instances listening on different interfaces/IPs
as master/slave for the same domain if you only have one machine--some
registrars will not permit master & slave on the same IP.
Or can BIND9 handle this in a single instance?
Cheers,
-John
Jeremy Gaddis wrote:
On T
At 2003-07-23T18:45:25Z, John Morgan Salomon <[EMAIL PROTECTED]> writes:
> Unless you have a different instances listening on different
> interfaces/IPs as master/slave for the same domain if you only have one
> machine--some registrars will not permit master & slave on the same IP. Or
> can BIND9
At 2003-07-23T17:17:41Z, Jeremy Gaddis <[EMAIL PROTECTED]> writes:
> No, it's generally considered {easier,better,more manageable,...} to only
> have one instance of BIND. BIND can be master for some domains and slave
> for others, so there really is no need.
I agree completely. That question w
In the last episode (Jul 23), John Morgan Salomon said:
> Unless you have a different instances listening on different
> interfaces/IPs as master/slave for the same domain if you only have
> one machine--some registrars will not permit master & slave on the
> same IP.
>
> Or can BIND9 handle this
On Wed, Jul 23, 2003 at 10:36:56AM -0700 or thereabouts, David Benfell wrote:
> Hello all,
>
> I've been playing with the bleeding edge stuff. And so, of course,
> I'm bleeding.
>
> System is FREEBSD 5.1-CURRENT. make world aborts at:
>
> install -s -o root -g wheel -m 444 -fschg libcrypt.s
John Morgan Salomon wrote:
Unless you have a different instances listening on different interfaces/IPs
as master/slave for the same domain if you only have one machine--some
registrars will not permit master & slave on the same IP.
Or can BIND9 handle this in a single instance?
The requirement to h
On Wed, 2003-07-23 at 13:45, John Morgan Salomon wrote:
> Unless you have a different instances listening on different interfaces/IPs
> as master/slave for the same domain if you only have one machine--some
> registrars will not permit master & slave on the same IP.
Isn't the requirement of provi
From: Dan Nelson <[EMAIL PROTECTED]>
To: Ryan Thompson <[EMAIL PROTECTED]>
CC: "Gerald S. Stoller" <[EMAIL PROTECTED]>, [EMAIL PROTECTED],
FreeBSD Questions <[EMAIL PROTECTED]>
Subject: Re: set user-id
Date: Tue, 22 Jul 2003 14:37:29 -0500
In the last episode (Jul 22), Ryan Thompson said:
>
At 2003-07-23T18:21:42Z, Eivind Olsen <[EMAIL PROTECTED]> writes:
> Are you able to have a mirrored root-device (/) with this approach? Or
> will you end up with having a single copy of / on one drive?
I end up with a single copy of '/'. However, I partition (both,all) drives
identically, so tha
On Wed, Jul 23, 2003 at 03:51:28PM +0200 or thereabouts, Eivind Olsen wrote:
> Hello.
>
> I'm about to install a new machine which will have 2 IDE-disks. I'd like to
> mirror some volumes between those disks while other volumes should be
> striped.
> I'd like to do this with FreeBSD 5.1.
>
> Th
In the last episode (Jul 23), Gerald S. Stoller said:
>
>
>
> >From: Dan Nelson <[EMAIL PROTECTED]>
> >To: Ryan Thompson <[EMAIL PROTECTED]>
> >CC: "Gerald S. Stoller" <[EMAIL PROTECTED]>, [EMAIL PROTECTED],
> >FreeBSD Questions <[EMAIL PROTECTED]>
> >Subject: Re: set user-id
> >Date: Tue, 22
Hey *,
A couple weeks ago I posted some error code and someone said it
was probably a dying hard drive. I believe he was correct and
that the drive is actively getting worse (it's in a "lights-out"
center in another state so I wish I could poke at it but I
can't). I'm hoping someone can confirm
Hello... I'm trying to figure out a way to pull off the following:
I have a subdir with many different sorts of text files (some nested in
additional subdirs, so recursion would be necessary) that need to have a
search & replace done on them. What's a quick way to script a global search
& replace
I'm trying to run a current Thunderbird build for Linux under compatibility.
It's quitting with:
[EMAIL PROTECTED]:~ $ ./thunderbird/thunderbird
./thunderbird/thunderbird-bin: error while loading shared libraries:
libgtk-x11-2.0.so.0: cannot open shared object file: No such file or
directory
[E
In the last episode (Jul 23), Scott I. Remick said:
> Hello... I'm trying to figure out a way to pull off the following:
>
> I have a subdir with many different sorts of text files (some nested in
> additional subdirs, so recursion would be necessary) that need to have a
> search & replace done on
On Wed, Jul 23, 2003 at 10:56:19AM -0400 or thereabouts, Scott I. Remick wrote:
> Hello... I'm trying to figure out a way to pull off the following:
>
> I have a subdir with many different sorts of text files (some nested in
> additional subdirs, so recursion would be necessary) that need to have
On Wed, 23 Jul 2003, Grzegorz Czaplinski wrote:
> On Tue, Jul 15, 2003 at 08:57:17PM +0200, Grzegorz Czaplinski wrote:
> > > >That would be good to have a webpage with server configurations that run
> > > >under FreeBSD. Don't you think so?
> > >
> > > Keeping the list of supported individual comp
On Wed, Jul 23, 2003 at 01:20:40PM -0700 or thereabouts, [EMAIL PROTECTED] wrote:
> On Wed, Jul 23, 2003 at 10:56:19AM -0400 or thereabouts, Scott I. Remick wrote:
> > Hello... I'm trying to figure out a way to pull off the following:
> >
> > I have a subdir with many different sorts of text files
Scott Mitchell wrote:
On Sun, Jul 20, 2003 at 10:52:51PM +0300, Alin-Adrian Anton wrote:
Hi guys,
anyone knows if this "*SMC - 2402W" *is supported by FreeBSD? I am going
to buy 2 x wireless cards. If any other are better supported or one
knows that they work well, please tell me, so I can b
Greetz,
I just updated from 5.0 release per the RELENG_5_0 tag. I had expected
that the source tree would then contain openssh-3.6.1p but after a make
installworld I see that it is still at 'OpenSSH_3.5p1 FreeBSD-20021029'
(according to a scanssh query.)
Should I be seeing 3.6.1 or is it not i
On Wed, Jul 23, 2003 at 10:21:03PM +0200, Olaf Hoyer wrote:
> > Hi there!
> > I have done the page. Here is the link:
> > http://prioris.mini.pw.edu.pl/~gregory/FreeBSD/
> >
> > Anyone who wants to share his/her experience is more than welcome the
> > send me the hardware spec and few words on expe
In the last episode (Jul 23), Darren Spruell said:
> I just updated from 5.0 release per the RELENG_5_0 tag. I had
> expected that the source tree would then contain openssh-3.6.1p but
> after a make installworld I see that it is still at 'OpenSSH_3.5p1
> FreeBSD-20021029' (according to a scanssh q
I get the same Segmentation fault when I try to run dmesg. I'm using the
bash shell. Oddly enough I can run sh though. Another odd thing if I try
to use cat with bash I get:
-bash: cat: command not found
but I get this if I run cat from sh:
cat: no such device or address
Thanks
On Wed, 23 Jul 2003 [EMAIL PROTECTED] wrote:
>
> I get the same Segmentation fault when I try to run dmesg. I'm using the
> bash shell. Oddly enough I can run sh though. Another odd thing if I try
> to use cat with bash I get:
>
> -bash: cat: command not found
>
> but I get this if I run cat fr
On Wed, Jul 23, 2003 at 03:28:38PM -0600 or thereabouts, [EMAIL PROTECTED] wrote:
>
> I get the same Segmentation fault when I try to run dmesg. I'm using the
> bash shell. Oddly enough I can run sh though. Another odd thing if I try
> to use cat with bash I get:
>
> -bash: cat: command n
I recently became responsible for our mail server, and lately, the load
average on the thing has been running consistently high, in mid-20's to
mid-30's. And at the same time, sendmail has become extremely sluggish
in terms of responding to connections on port 25.
There's got to be a bottleneck s
Quoting Rus Foster <[EMAIL PROTECTED]>:
> On Wed, 23 Jul 2003 [EMAIL PROTECTED] wrote:
>
>
> Try
>
> cd /
> echo *
>
> Rgds
>
> Rus
>
cd seems to work (I can cd to directories that I know exist, but get an
error if I try to cd to a directory that doesn't), but echo always ju
>
> cd seems to work (I can cd to directories that I know exist, but get an
> error if I try to cd to a directory that doesn't), but echo always just
> returns *
>
hmm strange...it could be the shell as echo * on mine does and ls
Rus
--
www: http://jvds.com | Virtual Servers from just $15/mo
Quoting [EMAIL PROTECTED]:
> On Wed, Jul 23, 2003 at 03:28:38PM -0600 or thereabouts,
> [EMAIL PROTECTED] wrote:
> >
> > I get the same Segmentation fault when I try to run dmesg. I'm using
> the
> > bash shell. Oddly enough I can run sh though. Another odd thing if I
> try
> > to
cdparanoia gets stuck at the point it begins to write the first wav file.
I've rebuilt the the 4-stable branch, including the atapicam device and
the kernel. This is so close to working it's driving me crazy. I don't
know what to do next!
Does anyone have any suggestions or can confirm cdparanoi
Quoting Rus Foster <[EMAIL PROTECTED]>:
> >
> > cd seems to work (I can cd to directories that I know exist, but get
> an
> > error if I try to cd to a directory that doesn't), but echo always
> just
> > returns *
> >
>
> hmm strange...it could be the shell as echo * on mine does and ls
frank brierley <[EMAIL PROTECTED]> writes:
> I have a HP deskjet 640c attached to a freebsd 4.8 box. This printer
> doesn't do plain text real easy, something to do with carrage return
> and line feed. There are a few simple printing filters on the web
> that help print plain text with lpd, but
In the last episode (Jul 23), Rus Foster said:
> > cd seems to work (I can cd to directories that I know exist, but
> > get an error if I try to cd to a directory that doesn't), but echo
> > always just returns *
>
> hmm strange...it could be the shell as echo * on mine does and ls
"echo *" in an
"Brad" <[EMAIL PROTECTED]> writes:
> I've been experiencing permission errors with make
> intermittently. It's happening with quite a few users on the box but
> it's just random. It's never a certain application or a certain
> user/group so it's been very hard to pinpoint what the problem is,
> he
Quoting Dan Nelson <[EMAIL PROTECTED]>:
> In the last episode (Jul 23), Rus Foster said:
> > > cd seems to work (I can cd to directories that I know exist, but
> > > get an error if I try to cd to a directory that doesn't), but echo
> > > always just returns *
> >
> > hmm strange...it coul
Hi,
I have HP SureStore C1557A tape device. Kernel detect my drive
succesfully. I run
tar -c somedir
and got this errors:
(sa0:ahc0:0:0:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0
(sa0:ahc0:0:0:0): Deferred Error: MEDIUM ERROR asc:3b,0
(sa0:ahc0:0:0:0): Sequential positioning error field r
In the last episode (Jul 23), [EMAIL PROTECTED] said:
> Quoting Dan Nelson <[EMAIL PROTECTED]>:
> > In the last episode (Jul 23), Rus Foster said:
> > > > cd seems to work (I can cd to directories that I know exist,
> > > > but get an error if I try to cd to a directory that doesn't),
> > > > but
I recently decided to move one of the drives in my main system into an
external USB 2.0 case. This was done so that I could take this drive
between several systems (it is primarily used for backup and data
archival).
Yes, I know that 1394 (FireWire) would be faster, but not all of my
machines are
At 2003-07-23T21:37:46Z, John Fox <[EMAIL PROTECTED]> writes:
> What procedures would folks recommend for me to follow in order to try and
> determine the problem?
Step one: run `top' and see what process(es) are using the most CPU. It may
be something not directly related to Sendmail. For exam
From: Dan Nelson <[EMAIL PROTECTED]>
To: "Gerald S. Stoller" <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: set user-id
Date: Wed, 23 Jul 2003 14:23:05 -0500
In the last episode (Jul 23), Gerald S. Stoller said:
>
>
>
> >From: Dan Nelson <[EMAIL PROT
In the last episode (Jul 23), Dan Nelson said:
> In the last episode (Jul 23), [EMAIL PROTECTED] said:
> > But I would think that this means the shell couldn't open the
> > directory to get the filenames to match?
>
> That's also a possibility. You can use cat to tell the difference
> though.. H
Hi All,
I've hit a problem where screen is saying can't add any more tty's. Fair
enough but how do I add some?
Rgds
Rus
--
www: http://jvds.com | Virtual Servers from just $15/mo
MSNM: [EMAIL PROTECTED] | Totally Customizable Technology
e: [EMAIL PROTECTED] | FreeBSD & Linux
10%
Hi,
I am confused about which version to use for a production server. Nowhere does it say
"this is the newest version to use for a production server", especially if the STABLE
branch is still a development branch. I'm not sure if this is a CYA thing, or if I'm
just not finding the right informa
> Hi,
>
> I am confused about which version to use for a production server. Nowhere
does it say "this is the newest version to use for a production server",
especially if the STABLE branch is still a development branch. I'm not sure
if this is a CYA thing, or if I'm just not finding the right infor
Dan Nelson wrote:
In the last episode (Jul 23), Darren Spruell said:
I just updated from 5.0 release per the RELENG_5_0 tag. I had
expected that the source tree would then contain openssh-3.6.1p but
after a make installworld I see that it is still at 'OpenSSH_3.5p1
FreeBSD-20021029' (according to
1 - 100 of 115 matches
Mail list logo