Installing Matlab R13 useing Linux compatibility

2003-09-08 Thread Robert Stickney
I have the student version installed and I am running FreeBSD 5.0 with linux binary compatibility. I brandelf'ed the Matlab executable and I still get this error when I run Matlab. Matlab: error while loading shared libraries: libut.so: cannot open shared object file: No such file or directory

fsck

2003-09-08 Thread Eric Lam
Hi, A few days ago, my server got hit by a number of black outs and brown outs. I've been kinda worried about the disk integrity and want to do some form of chkdsk/scandisk on it. I've read the man pages on fsck and I'm not sure where to start. Every time I run fsck, it claims my drive is not

make failed

2003-09-08 Thread Ricardo Britto
Greetings, I was rebuilding my custom kernel ( one of reasons is about sound), it was going well until in 'make depend' command. I have got error 1. WTF does it mean? How can I fix it? Here goes the log: = ../../../pci/if_rl.c:119:23:

Re: fsck

2003-09-08 Thread Kent Stewart
On Sunday 07 September 2003 11:16 pm, Eric Lam wrote: Hi, A few days ago, my server got hit by a number of black outs and brown outs. I've been kinda worried about the disk integrity and want to do some form of chkdsk/scandisk on it. I've read the man pages on fsck and I'm not sure where to

3c905b-tx not working on fresh install of FreeBSD 5.0

2003-09-08 Thread Steiger, N. Wilson, (GS-12E)(TRNG) ATG WESTPAC
To all: I have just installed FreeBSD 5.0 on a Pent. 200 MMX w/192 MB RAM and 3-8 GB HDs (SCSI-using AHA-2940U). My NIC is a 3c905b-tx. The motherboard is set to non-plug-and-play. While booting the NIC shows link on my hub, but no activity (duh), but as soon as the kernel sends configuration

Re: make failed

2003-09-08 Thread Jonathan Chen
On Mon, Sep 08, 2003 at 03:19:50AM -0300, Ricardo Britto wrote: Greetings, I was rebuilding my custom kernel ( one of reasons is about sound), it was going well until in 'make depend' command. I have got error 1. WTF does it mean? How can I fix it? Here goes the log:

Help! I need a small(old ?) FreeBSD release

2003-09-08 Thread Dorin-Constantin Scutarasu
Hi, I have an old computer (AMD DX2486 @80MHz and 16MB RAM) and I want to install FreeBSD on an empty 53 MB partition. I couldn't find an old release small enough to fit. Can you help? The smallest all purpose release I could find is release 2.2.8 but it's still not small enough. Thank you,

Re: OpenOffice 1.1rc3-Linux on FreeBSD 4.6.2 installation problems

2003-09-08 Thread David Gerard
Do you have linprocfs mounted? I think it's required for 4.6.2 I just mounted it anyway, to try that: [EMAIL PROTECTED]:~ $ ls -la /compat/linux/proc total 4 drwxr-xr-x 2 root wheel 512 Sep 18 2002 . drwxr-xr-x 12 root wheel 512 Sep 18 2002 .. [EMAIL PROTECTED]:~ $ sudo

Re: Opera print issues

2003-09-08 Thread Karel J. Bosschaart
On Sun, Sep 07, 2003 at 11:26:56PM +0200, Kees Jan Koster wrote: Dear All, Opera won't print a site that I use regularly. I would like to know if this is a local issue, or something that the Opera folks should know about. To reproduce: * start Opera * browse to

Re: Binding MAC to IP Statically

2003-09-08 Thread Timur
On Sun, Sep 07, 2003 at 06:24:52PM -0400, Lowell Gilbert wrote: Chuck Swiger [EMAIL PROTECTED] writes: Colin Watson wrote: [ ...rewrapped to 80-columns... ] Any way to bind a MAC address statically to an IP?. I wish to do this to prevent a user from changing his IP address on the

Re: Opera print issues

2003-09-08 Thread Kees Jan Koster
Dear Karel, I read about Opera dumping core quite a bit, but I believe that 7.20 Bx fixes that problem mostly. It hardly ever dumps core on me. In fact, I think 7.20 has been stable, save for the issues I reported earlier. Kees Jan ___ [EMAIL

FreeBSD upgrade on production server

2003-09-08 Thread SUPPORT
Hello everybody, I wish to upgrade my production firewall / mailserver / DNS server from 4.3 to 4.8. The simplest way seems to be use of CVSUP. OK, but... Is it safe ? What should I backup ? There is running well-configured sendmail - are there some changes in its configuration between

FreeBSD upgrade on production server

2003-09-08 Thread SUPPORT
Hello everybody, I wish to upgrade my production firewall / mailserver / DNS server from 4.3 to 4.8. The simplest way seems to be use of CVSUP. OK, but... Is it safe ? What should I backup ? There is running well-configured sendmail - are there some changes in its configuration between

FreeBSD upgrade on production server

2003-09-08 Thread SUPPORT
Hello everybody, I wish to upgrade my production firewall / mailserver / DNS server from 4.3 to 4.8. The simplest way seems to be use of CVSUP. OK, but... Is it safe ? What should I backup ? There is running well-configured sendmail - are there some changes in its configuration between versions

Re: Bootable CD Problems

2003-09-08 Thread SUPPORT
OK, here are 3 messages I can found now in my archive of Questions: -- Date: Tue, 2 Sep 2003 15:17:26 +0300 From: Ville Lundberg [EMAIL PROTECTED] Subject: ATA command timeout To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED]

Re: Bootable CD Problems

2003-09-08 Thread SUPPORT
Hello Dan, you are the fourth person except me, who has this problem and wrote it to the list. FreeBSD is still doing nothing with it - is it such big problem to solve it ? There is no useful advice yet, what can we do - nobody knows ? Peter Rosa - Original Message - From: MacMan20001

Re: FreeBSD upgrade on production server

2003-09-08 Thread Luke Kearney
I reckon you have not even bothered to read the docs available at the FreeBSD website nor the information that is generally available on the system itself. Whilst I am at it, don't double / triple post the same question. - Original Message - From: "SUPPORT" [EMAIL

removing swap space...only by reboot? A bug?

2003-09-08 Thread Rob Lahaye
Hi, man swapon says: BUGS There is no way to stop paging and swapping on a device. It is therefore not possible to dismount swap devices which are mounted during system operation. Is that still a bug? -- The Handbook explains how additional swap space can be added to a

FreeBSD Upgrade on production server

2003-09-08 Thread Peter Rosa
Hello everybody, I wish to upgrade my production firewall / mailserver / DNS server from 4.3 to 4.8. The simplest way seems to be use of CVSUP. OK, but... Is it safe ? What should I backup ? There is running well-configured sendmail - are there some changes in its configuration between versions

Re: Making a certain cron job

2003-09-08 Thread Matthew Seaman
On Sun, Sep 07, 2003 at 10:44:18PM -0400, Jason Lieurance wrote: Thank you for the response. Does the date part (Date=`date +%Y-%m-%d`) go as part of the cron job? Thanks again. % characters are special in crontabs -- you need to escape them using a backslash: 0 0 * * * mail -s log [EMAIL

RE: Binding MAC to IP Statically

2003-09-08 Thread Yonatan Bokovza
-Original Message- From: Chuck Swiger [mailto:[EMAIL PROTECTED] Sent: Sunday, September 07, 2003 23:10 To: Colin Watson Cc: [EMAIL PROTECTED] Subject: Re: Binding MAC to IP Statically Colin Watson wrote: [ ...rewrapped to 80-columns... ] Any way to bind a MAC address

Re: FreeBSD install corrupts neighboring partitions

2003-09-08 Thread Raphal Marmier
Happened to me as well in the past. With Linux as well. I think I solved it by installing BSD first and then windows, I'm not sure though. Raphael Le Lundi, 8 sep 2003, 05:25 Europe/Zurich, Dan Harrison a crit : I'm attempting to install FreeBSD 4.8 on a system which will boot it and also

Re: removing swap space...only by reboot? A bug?

2003-09-08 Thread Ceri Davies
On Mon, Sep 08, 2003 at 05:28:54PM +0900, Rob Lahaye wrote: Hi, man swapon says: BUGS There is no way to stop paging and swapping on a device. It is therefore not possible to dismount swap devices which are mounted during system operation. Is that still a

Re: Ghost for FreeBSD

2003-09-08 Thread Mark
- Original Message - From: Vincent Poy [EMAIL PROTECTED] To: Mark [EMAIL PROTECTED] Cc: Ruben de Groot [EMAIL PROTECTED]; [EMAIL PROTECTED]; Joshua Oreman [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 10:16 AM Subject: Re: Ghost for FreeBSD Sorry for the tardiness of my reply (see

Re: Ghost for FreeBSD

2003-09-08 Thread Vincent Poy
On Mon, 8 Sep 2003, Mark wrote: - Original Message - From: Vincent Poy [EMAIL PROTECTED] To: Mark [EMAIL PROTECTED] Cc: Ruben de Groot [EMAIL PROTECTED]; [EMAIL PROTECTED]; Joshua Oreman [EMAIL PROTECTED] Sent: Thursday, September 04, 2003 10:16 AM Subject: Re: Ghost for FreeBSD

Re: Binding MAC to IP Statically

2003-09-08 Thread Timur
On Mon, Sep 08, 2003 at 12:07:33PM +0300, Yonatan Bokovza wrote: -Original Message- From: Chuck Swiger [mailto:[EMAIL PROTECTED] Sent: Sunday, September 07, 2003 23:10 To: Colin Watson Cc: [EMAIL PROTECTED] Subject: Re: Binding MAC to IP Statically Colin Watson wrote:

RE: Binding MAC to IP Statically

2003-09-08 Thread Yonatan Bokovza
-Original Message- From: Timur [mailto:[EMAIL PROTECTED] Sent: Monday, September 08, 2003 12:34 To: Yonatan Bokovza Cc: [EMAIL PROTECTED] Subject: Re: Binding MAC to IP Statically On Mon, Sep 08, 2003 at 12:07:33PM +0300, Yonatan Bokovza wrote: -Original Message-

FreeBSD vs. Linux TechTV Clip - Edited and Sync'ed

2003-09-08 Thread Mike Maltese
An edited version of the FreeBSD vs. Linux Shootout that recently aired on TechTV's The ScreenSavers will be available at around 4 AM PDT. The audio synchronization issues are fixed and by trimming out the other segments I was able to get the file size down to 89 MB. I've copied newbies and

HP Compaq nx9000

2003-09-08 Thread Steven Ruiters
Hi, 1. I have purchase a HP laptop (HP Compaq nx9000) the network card, modem and display card is working under FreeBSD 5.1. The only problems I have us with the touch pad mouse and sound card. What am I doing wrong. 2. I also have a P3 laptop (Compaq). Question~ under win os's you can copy

Re: FreeBSD vs. Linux TechTV Clip - Edited and Sync'ed

2003-09-08 Thread Matt Olander
On Mon, Sep 08, 2003 at 02:53:30AM -0700, Mike Maltese wrote: An edited version of the FreeBSD vs. Linux Shootout that recently aired on TechTV's The ScreenSavers will be available at around 4 AM PDT. The audio synchronization issues are fixed and by trimming out the other segments I was able

Re: FreeBSD vs. Linux TechTV Clip - Edited and Sync'ed

2003-09-08 Thread Devon H. O'Dell
Awesome! You++ I'm off to mirror this one and then download it again :-D --Devon Mike Maltese wrote: An edited version of the FreeBSD vs. Linux Shootout that recently aired on TechTV's The ScreenSavers will be available at around 4 AM PDT. The audio synchronization issues are fixed and by

Re: FreeBSD vs. Linux TechTV Clip - Edited and Sync'ed

2003-09-08 Thread Devon H. O'Dell
Awesome! You++ I'm off to mirror this one on the east coast (wr0d ph33r -- I feel like a rapper with a gun or something, heh) and then download it again :-D --Devon Mike Maltese wrote: An edited version of the FreeBSD vs. Linux Shootout that recently aired on TechTV's The ScreenSavers will be

JAVA and MOZILLA

2003-09-08 Thread David L
I have been trying for quite some tiime to get Mozilla a Java Plugin that it will actually use. I have tried the linux-xun-jdk versions 1.3.1 1.4.1 1.4.2 , konqueror web browser uses these succesfully, however I symlink /usr/local/linux-sun-jdk1.4.1/jre/plugin/i386/ns600/libjavapluginoji.so to

Re: I2O support in FreeBSD

2003-09-08 Thread Harald Schmalzbauer
On Monday 08 September 2003 01:06, Andrea Venturoli wrote: ** Reply to note from Harald Schmalzbauer [EMAIL PROTECTED] Sun, 7 Sep 2003 14:57:38 +0200 Does FreeBSD have anything comparable to Linux's I2O support? My impression is that it is dealt with on a driver by driver basis and

Re: FreeBSD vs. Linux TechTV Clip - Edited and Sync'ed

2003-09-08 Thread Devon H. O'Dell
For the -newbies and -questions lists: freebsd0 is a west coast server at 100mbit. Please use it if you are west coast. My other server is sitetronics.com, which is east coast at 10mbit. Please use it if you are east coast. The files in question are: Edited:

Re: FreeBSD vs. Linux TechTV Clip - Edited and Sync'ed

2003-09-08 Thread Devon H. O'Dell
Attention everybody downloading from freebsd0: Mike's not quite done uploading yet ;) Please feel free to spare the 10Mbit you're using for approximately 15 to 20 minutes :) --Devon ___ [EMAIL PROTECTED] mailing list

Re: FreeBSD vs. Linux TechTV Clip - Edited and Sync'ed

2003-09-08 Thread Luke Kearney
For anyone interested a further mirror is available from the links below. This server is in Japan @ 100Mbps. People in Asia or possible WC USA might find this suitable. http://www.meibin.net/lukek/FreeBSD/freebsd_vs_linux-techtv_ 20030902-edited.avi

USB stick

2003-09-08 Thread Christoph Kukulies
Hi, I inserted an USB stick into a 5.1 FreeBSD box and was pleasantly surprised to see it being autodetected: umass0: UrDisk USB FLASH DISK, rev 1.10/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: UrDisk USB FLASH DISK 1.00 Removable Direct Access SCSI-2 device da0: 1.000MB/s

Re: converting internet addresses

2003-09-08 Thread Michal F. Hanula
[...] The server recognizes the browser's request by name (bsdcon.kwiki.org) and serves from the web folder configured to receive that request. www.bsdcon.kwiki.org sends you to some other folder in the same way, or perhaps it is unconfigured and sends you instead to the 'default' folder at

Re: RE: IBM 120 G IDE -- problems

2003-09-08 Thread Simon Barner
[ top posting corrected ] I have that problem with an ASUS P4S533 motherboard. I add these sysctl values to /boot/loader.conf: hw.ata.ata_dma=0 hw.ata.atapi_dma=0 OH MAN.. You don't know how many hours you just saved me!!! It boots up beautifully with 3 drives. Thank

Re: how to check which COM port modem is connected to?

2003-09-08 Thread Ramanan Selvaratnam
--- Alex Zivenko [EMAIL PROTECTED] wrote: You must know it. In windows name of port is comx in Unix - /dev/cuax-1 com1 - cua0, com2-cua1, com3 - cua2 Have you win on this PC? Then you can see there. What would be helpful to know (for future) is where one can find this detail on MS Windows

Re: how to check which COM port modem is connected to?

2003-09-08 Thread Raphal Marmier
Le Lundi, 8 sep 2003, 14:04 Europe/Zurich, Ramanan Selvaratnam a crit : --- Alex Zivenko [EMAIL PROTECTED] wrote: You must know it. In windows name of port is comx in Unix - /dev/cuax-1 com1 - cua0, com2-cua1, com3 - cua2 Have you win on this PC? Then you can see there. What would be helpful

Re: Binding MAC to IP Statically

2003-09-08 Thread Ceri Davies
On Mon, Sep 08, 2003 at 12:50:04PM +0500, Timur wrote: What I'd like to is to be able to assign unused IP addresses to some 'invalid' MAC address, so that my router responds with 'host unreachable' to incoming packets destined to these addresses.. Well, do that then. # arp -s

Re: removing swap space...only by reboot? A bug?

2003-09-08 Thread Rob Lahaye
Ceri Davies wrote: On Mon, Sep 08, 2003 at 05:28:54PM +0900, Rob Lahaye wrote: man swapon says: BUGS There is no way to stop paging and swapping on a device. It is therefore not possible to dismount swap devices which are mounted during system operation. Is that still a

nwfs problems

2003-09-08 Thread [EMAIL PROTECTED]
Hello, I'm trying to mount some volumes from a Novell NetWare 5 using 4.8-RELEASE FreeBSD. dmesg shows the following error: /kernel: module_register_init: MOD_LOAD (nwfs, c024387c, 0xc0541500) error 17 From the original install I've made these modifs: #kernel config file options NWFS options NCP

Re: Installing Matlab R13 useing Linux compatibility

2003-09-08 Thread Dan Pelleg
Robert Stickney [EMAIL PROTECTED] writes: I have the student version installed and I am running FreeBSD 5.0 with linux binary compatibility. I brandelf'ed the Matlab executable and I still get this error when I run Matlab. Matlab: error while loading shared libraries: libut.so: cannot open

Re: linux_base

2003-09-08 Thread Lowell Gilbert
Scott Ballantyne [EMAIL PROTECTED] writes: If I'm running multi-user (as toor), the build stops when installing glibc. In linux_base, there's actually a coredump, in linux_base-8, it just stops. This happens even running the GENERIC kernel (I had previously thought it was perhaps related to a

Re: [newbie] 4.8-STABLE became unreachable

2003-09-08 Thread Lowell Gilbert
admin [EMAIL PROTECTED] writes: I am suspecting hardware issues - perhaps the RAM memory board. 512MB single board. If your suspicion is strong, test this directly. Do a full memory test if you can take the machine offline long enough; if not, do something that is both memory- and cpu-

Re: removing swap space...only by reboot? A bug?

2003-09-08 Thread Ceri Davies
On Mon, Sep 08, 2003 at 09:30:49PM +0900, Rob Lahaye wrote: Ceri Davies wrote: On Mon, Sep 08, 2003 at 05:28:54PM +0900, Rob Lahaye wrote: man swapon says: BUGS There is no way to stop paging and swapping on a device. It is therefore not possible to dismount swap

simulating panic(9)

2003-09-08 Thread Andrew L. Neporada
How can I force FreeBSD 4.8 to panic? I just want to be sure that I can get a core dump/backtrace in this situation. Andrew. P.S. Please CC me, I am not subscribed to the list. ___ [EMAIL PROTECTED] mailing list

Re: FreeBSD upgrade on production server

2003-09-08 Thread Lowell Gilbert
SUPPORT [EMAIL PROTECTED] writes: I wish to upgrade my production firewall / mailserver / DNS server from 4.3 to 4.8. The simplest way seems to be use of CVSUP. OK, but... Right, so far. Is it safe ? It's not completely safe. Of course, neither is running a two-and-a-half year-old release

Re: simulating panic(9)

2003-09-08 Thread Lowell Gilbert
Andrew L. Neporada [EMAIL PROTECTED] writes: How can I force FreeBSD 4.8 to panic? I just want to be sure that I can get a core dump/backtrace in this situation. Usually with ddb(4); see the FAQ http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/advanced.html#KERNEL-PANIC-TROUBLESHOOTING

Re: Binding MAC to IP Statically

2003-09-08 Thread Lowell Gilbert
[EMAIL PROTECTED] (Timur) writes: no, it doesn't.. what it does - establishing static mapping from IP to MAC address.. Now I'm facing the same problem as original poster - how can I prevent users from changing their IP address to some other (from the same subnet)?.. Let's say I have a

network port

2003-09-08 Thread Brian Henning
Greetings: I am in need of a tool that verifies if a network port is good or bad, is there a tool for bsd that can do this? Thanks, Brian ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe,

Re: FreeBSD upgrade on production server - Solved

2003-09-08 Thread Peter Rosa
Many thanks to everybody. Of course, I have read the Handbook, but there are very wide solution, not so specific as I tried to find. There is never said e.g. Backup file /etc/fstab or After installation mergemaster your previously backed sendmail.cf with the new one to include your old changes.

Re: Does Wine work on FreeBSD 5.1?

2003-09-08 Thread Jonathan Fosburgh
On Sunday 07 September 2003 11:52 am, Adam McLaurin wrote: On Sun, 2003-09-07 at 12:04, Dan Strick wrote: Does Wine work on FreeBSD 5.1? snip It works here (well, as well as can be expected). I'd recommend using emulators/linux-winetools to configure it. That'll make life quite a bit

Re: FreeBSD upgrade on production server - Solved

2003-09-08 Thread Peter Elsner
Looks like you forgot to run mergemaster. man mergemaster Peter Elsner At 03:48 PM 9/8/2003 +0200, you wrote: Many thanks to everybody. Of course, I have read the Handbook, but there are very wide solution, not so specific as I tried to find. There is never said e.g. Backup file /etc/fstab or

Re: Binding MAC to IP Statically

2003-09-08 Thread Timur
On Mon, Sep 08, 2003 at 01:29:56PM +0100, Ceri Davies wrote: On Mon, Sep 08, 2003 at 12:50:04PM +0500, Timur wrote: What I'd like to is to be able to assign unused IP addresses to some 'invalid' MAC address, so that my router responds with 'host unreachable' to incoming packets destined

Re: FreeBSD upgrade on production server - Solved

2003-09-08 Thread Lowell Gilbert
Peter Rosa [EMAIL PROTECTED] writes: Of course, I have read the Handbook, but there are very wide solution, not so specific as I tried to find. There is never said e.g. Backup file /etc/fstab or After installation mergemaster your previously backed sendmail.cf with the new one to include your

Re: network port

2003-09-08 Thread Lowell Gilbert
Brian Henning [EMAIL PROTECTED] writes: I am in need of a tool that verifies if a network port is good or bad, is there a tool for bsd that can do this? It kind of depends what you mean by good and bad. For varying definitions of those terms, you might want sockstat(1), nessus, nmap, or any

Re: converting internet addresses

2003-09-08 Thread Kevin Kinsey, DaleCo, S.P.
From: Michal F. Hanula [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, September 08, 2003 6:13 AM Subject: Re: converting internet addresses [EMAIL PROTECTED] dnsip this.is.almost.certainly.a.dns.wild.card.kwiki.org 65.214.160.247 Yes, this certainly explains it, LOL... Wonder if

Re: 802.11g and FreeBSD based access point ...

2003-09-08 Thread Jesse Guardiani
Matthias Teege wrote: Vledder, Hans [EMAIL PROTECTED] writes: I am considering building a 802.11g FreeBSD access point. I've read that I will need a network adapter that supports hostap (access point mode). Does anyone known a brand/model (PCI) that's being supported by FreeBSD ? Netgear

Re: xdm config files overwritten after upgrading Xfree86-clients from ports

2003-09-08 Thread Heinrich Rebehn
Matthew Seaman wrote: On Fri, Sep 05, 2003 at 01:45:03PM +0200, Heinrich Rebehn wrote: Matthew Seaman wrote: However, I just keep a backup copy of the /usr/X11R6/lib/X11/xdm directory handy: # cd /usr/X11R6/lib/X11/ # rsync -avx --delete xdm/ xdm.bak/ Cheers, Matthew Ok, this would help

RE: aliasing ethernet cards in FBSD

2003-09-08 Thread Barry Byrne
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Gary Sent: 08 September 2003 15:40 How would I do this in FBSD, setting up an aliased ether to an Ip address? my current rc.conf file currently contains just the address of the machine, as such.

Re: Question on CVS Branches

2003-09-08 Thread Heinrich Rebehn
Chuck Swiger wrote: Heinrich Rebehn wrote: Chuck Swiger wrote: [ ... ] 6-sec% touch ~/.cvspass 7-sec% cvs -d :pserver:[EMAIL PROTECTED]:/home/ncvs login Logging in to :pserver:[EMAIL PROTECTED]:2401/home/ncvs CVS password: [ Use anoncvs for the password. ] 8-sec% cvs -d :pserver:[EMAIL

perl version trouble.

2003-09-08 Thread Matthias Meyser
Hi when I tried to build /usr/ports/databases/mysql323-server on my freshly build 4.9-PRERELEASE box (I think this will also hit 4.8 boxes), make broke in /usr/ports/databases/p5-DBI. This is required by /usr/ports/databases/p5-Mysql which is required by /usr/ports/databases/mysql323-server.

Re: aliasing ethernet cards in FBSD

2003-09-08 Thread Gary
On Mon, Sep 08, 2003 at 03:53:15PM +0100 or thereabouts, Barry Byrne wrote: How would I do this in FBSD, setting up an aliased ether to an Ip address? my current rc.conf file currently contains just the address of the machine, as such. ifconfig_rl0=inet 192.168.0.100 netmask

Re: JAVA and MOZILLA

2003-09-08 Thread Alex de Kruijff
On Mon, Sep 08, 2003 at 08:04:08PM +1000, David L wrote: I have been trying for quite some tiime to get Mozilla a Java Plugin that it will actually use. I am also trying to get Java working but for Opera. I know from my past that the jdk1x port worked. So my first guess is that you don't want

Not able to finish new 4.8 install on Compaq Alphaserver DS20

2003-09-08 Thread Gavin Hubbard
Hello I am new to *BSD and I'm doing a FreeBSD 4.8 installation for the first time. My target system is my Compaq Alpahserver DS20 (dual 500MHz EV6, 2GB RAM, 4x4GB RAID 0+1 and 2x9GB RAID 1 on storage works RA230 controller, CDROM + DDS3 on Symbios UW + ethernet controller, plus some misc I/O

[no subject]

2003-09-08 Thread Brian J. McGovern
Hi, I inserted an USB stick into a 5.1 FreeBSD box and was pleasantly surprised to see it being autodetected: umass0: UrDisk USB FLASH DISK, rev 1.10/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: UrDisk USB FLASH DISK 1.00 Removable Direct Access SCSI-2 device

Re: your mail

2003-09-08 Thread Christoph P. Kukulies
On Mon, Sep 08, 2003 at 11:27:51AM -0400, Brian J. McGovern wrote: Hi, I inserted an USB stick into a 5.1 FreeBSD box and was pleasantly surprised to see it being autodetected: umass0: UrDisk USB FLASH DISK, rev 1.10/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun

Lire PDF Output?

2003-09-08 Thread Fernando Gleiser
I'm trying to use lire generate some PDF reports from logfiles. I followed the instructions given by make pdf: I did install teTeX, link /usr/local/bin/pdfjadetex to /usr/local/bin/pdftex and bumped pool_size.pdfjadetex to 50 in /usr/local/share/texmf/web2c/texmf.cnf But I still can't get

Re: 3c905b-tx not working on fresh install of FreeBSD 5.0

2003-09-08 Thread Alex de Kruijff
On Mon, Sep 08, 2003 at 03:58:13PM +0900, Steiger, N. Wilson, (GS-12E)(TRNG) ATG WESTPAC wrote: To all: I have just installed FreeBSD 5.0 on a Pent. 200 MMX w/192 MB RAM and 3-8 GB HDs (SCSI-using AHA-2940U). My NIC is a 3c905b-tx. The motherboard is set to non-plug-and-play. While

Re: Question on CVS Branches

2003-09-08 Thread Chuck Swiger
Heinrich Rebehn wrote: Chuck Swiger wrote: [ ... ] I had to enter the password for the cvs login; the CVS checkout operation did not require a password. How do you enter a password from within a cron job? You don't/can't. That's why you cvs login by hand, enter the password. Later, when you run

Re: Help! I need a small(old ?) FreeBSD release

2003-09-08 Thread Alex de Kruijff
On Mon, Sep 08, 2003 at 12:26:49AM -0700, Dorin-Constantin Scutarasu wrote: Hi, I have an old computer (AMD DX2486 @80MHz and 16MB RAM) and I want to install FreeBSD on an empty 53 MB partition. I couldn't find an old release small enough to fit. Can you help? The smallest all purpose

Slow Adaptec Quad-Nic

2003-09-08 Thread Alexandre Biancalana
Hi All, I have a Firewall/Gateway with an Quad-NIC Adaptec ANA6944A, that when I'm doing a big download, the switch port where the machine is connected points that's is down and the following messages appear in /var/log/messages: Sep 8 10:53:41 Krusty /kernel: sf0: watchdog timeout Sep

Re: FreeBSD upgrade on production server

2003-09-08 Thread Alex de Kruijff
On Sun, Sep 07, 2003 at 05:48:42PM +0200, SUPPORT wrote: Hello everybody, I wish to upgrade my production firewall / mailserver / DNS server from 4.3 to 4.8. The simplest way seems to be use of CVSUP. OK, but... Is it safe ? What should I backup ? There is running well-configured

Re: Not able to finish new 4.8 install on Compaq Alphaserver DS20

2003-09-08 Thread Matthew Seaman
On Tue, Sep 09, 2003 at 03:23:55AM +1200, Gavin Hubbard wrote: The problem I have is that once Sysinstall keeps stopping towards the end of the installtion with the following message: Unable to get packages/INDEX file from selected media. This may be because the packages collection is not

Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Doug Lee
Hard to define this one fully in a subject line... I have two FreeBSD 4.x systems running sendmail. I'm trying to send mail to a site that recently started using the WebShield virus protection system for incoming mail. If I send from Mutt, the mails are refused by the WebShielded site; if I

RE: Not able to finish new 4.8 install on Compaq Alphaserver DS20

2003-09-08 Thread Gavin Hubbard
-Original Message- From: Matthew Seaman That's because the mini-iso doesn't contain any packages. However, apart from installing some third party packages, you have, in fact, successfully installed FreeBSD. I suggest that you quit out of sysinstall, boot up your system in

Problem with initialize the system

2003-09-08 Thread Ricardo Javier Aranibar Len
Hi, I have this problem with the system initialize: Local Package initialization:pgsql [warm] loaded DSO libexec/apache/libphp4.so uses plain apache 1.3 API this module might crash under EAPI please recompile it with -DEAPI DSO libexec/apache/mod_auth_pgsql.so uses plain

Re: Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Gary
On Mon, Sep 08, 2003 at 12:25:59PM -0400 or thereabouts, Doug Lee wrote: I have two FreeBSD 4.x systems running sendmail. I'm trying to send mail to a site that recently started using the WebShield virus The difference is that Mutt-generated messages' SMTP stream contains a line like

Re: Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Doug Lee
On Mon, Sep 08, 2003 at 11:37:41AM -0500, Gary wrote: On Mon, Sep 08, 2003 at 12:25:59PM -0400 or thereabouts, Doug Lee wrote: I have two FreeBSD 4.x systems running sendmail. I'm trying to send mail to a site that recently started using the WebShield virus The difference is that

Re: linux_base

2003-09-08 Thread Scott Ballantyne
Lowell Gilbert [EMAIL PROTECTED] writes: Scott Ballantyne [EMAIL PROTECTED] writes: If I'm running multi-user (as toor), the build stops when installing glibc. In linux_base, there's actually a coredump, in linux_base-8, it just stops. This happens even running the GENERIC kernel (I had

FreeBSD 4.8 local startup issues

2003-09-08 Thread admin
running: FreeBSD 4.8-STABLE okay I am having a strange issue. after the last reboot after my FreeBSD machine became unreachable - and required a power cycle. mostly all processes listed in /usr/local/etc/rc.d did not start. this only happens very rarely and has happens after FreeBSD crashed

Re: Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Gary
On Mon, Sep 08, 2003 at 12:46:46PM -0400 or thereabouts, Doug Lee wrote: MAIL From:[EMAIL PROTECTED] AUTH= whereas mail generated from Pine or a Windows mailer looks like MAIL From:[EMAIL PROTECTED] In other words, the AUTH= only appears in Mutt-generated mail. set sendmail =

[newbie] 4.8-STABLE became unreachable

2003-09-08 Thread admin
well my machine just became unreachable and trying to figure out what to do about it. Its the first time in my history of using freeBSD to experience this. we have kernel firewall enabled and running portsentry as well. we power cycled to clear the situation as we could not log in via the

Re: 802.11g and FreeBSD based access point ...

2003-09-08 Thread Andrew L. Gould
On Monday 08 September 2003 09:42 am, Jesse Guardiani wrote: Matthias Teege wrote: Vledder, Hans [EMAIL PROTECTED] writes: I am considering building a 802.11g FreeBSD access point. I've read that I will need a network adapter that supports hostap (access point mode). Does anyone known a

Re: Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Doug Lee
On Mon, Sep 08, 2003 at 12:00:31PM -0500, Gary wrote: On Mon, Sep 08, 2003 at 12:46:46PM -0400 or thereabouts, Doug Lee wrote: MAIL From:[EMAIL PROTECTED] AUTH= whereas mail generated from Pine or a Windows mailer looks like MAIL From:[EMAIL PROTECTED] In other words, the AUTH=

Re: JAVA and MOZILLA

2003-09-08 Thread Peter Ulrich Kruppa
On Mon, 8 Sep 2003, David L wrote: I have been trying for quite some tiime to get Mozilla a Java Plugin that it will actually use. I have tried the linux-xun-jdk versions 1.3.1 1.4.1 1.4.2 , konqueror web browser uses these succesfully, however I symlink

Re: Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Gary
On Mon, Sep 08, 2003 at 01:08:15PM -0400 or thereabouts, Doug Lee wrote: On Mon, Sep 08, 2003 at 12:00:31PM -0500, Gary wrote: On Mon, Sep 08, 2003 at 12:46:46PM -0400 or thereabouts, Doug Lee wrote: MAIL From:[EMAIL PROTECTED] AUTH= whereas mail generated from Pine or a Windows

RE: 5.1 WD 80.0GB SE Drive Geometry

2003-09-08 Thread Jim
Had to set the drive detection type in the BIOS to user (manual) instead of auto, and make sure the drive itself was set as a single master without slave (e.g. all jumpers removed) as well as specifying LBA directly, but with the drive set up manually in the BIOS, the jumpers yanked, and LBA

FreeBSD 5.1 Installation Problem

2003-09-08 Thread Reinhart Steyaert
Hi, I want to install FreeBSD 5.1 but have the following problem: during the installation, you have to choose Installation Media. I choose the first option, 'install from a CD/DVD', but get the message Cannot find CD/DVD devices... (or something like that). But I can boot from the CD (it's a

Re: Opera print issues

2003-09-08 Thread Petre Bandac
my opera (7.11) won't show flash pages, though kgb# pkg_info | grep flash flashpluginwrapper-0.20021113 A wrapper allowing use of linux-flashplugin with native moz linux-flashplugin-5.0r51 The official Macromedia Flash Player for Linux Netscape and linux-flashplugin-6.0r79 The official

Re: Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Doug Lee
On Mon, Sep 08, 2003 at 12:40:39PM -0500, Gary wrote: On Mon, Sep 08, 2003 at 01:08:15PM -0400 or thereabouts, Doug Lee wrote: On Mon, Sep 08, 2003 at 12:00:31PM -0500, Gary wrote: On Mon, Sep 08, 2003 at 12:46:46PM -0400 or thereabouts, Doug Lee wrote: MAIL From:[EMAIL PROTECTED]

Bind query logging stops after a logrotate.

2003-09-08 Thread Charlie Schluting
FBSD 5.1: Using Bind9.2.2, and I have query logging turned on: logging { channel querylog { file /var/log/query.lo~g; print-time yes; }; category queries { querylog; }; }; After a logrotate, it stops logging completely. The permissions are correct, and all I have to do to make it start

Re: Empty AUTH= in SMTP from Mutt message causing refused mail

2003-09-08 Thread Gary
On Mon, Sep 08, 2003 at 02:05:15PM -0400 or thereabouts, Doug Lee wrote: These are the lines that look potentially relevant from my .muttrc: set edit_hdrs # let me edit the message header when composing snip Okay, thanks. So I see it as a three-pronged problem: (1)

Re: Bind query logging stops after a logrotate.

2003-09-08 Thread Garance A Drosihn
At 12:04 PM -0700 9/8/03, Charlie Schluting wrote: FBSD 5.1: Using Bind9.2.2, and I have query logging turned on: logging { channel querylog { file /var/log/query.lo~g; print-time yes; }; category queries { querylog; }; }; After a logrotate, it stops logging completely. The permissions are

Re: Bind query logging stops after a logrotate.

2003-09-08 Thread John Ekins
Hello Charlie, On Mon, 8 Sep 2003 12:04 , Charlie Schluting [EMAIL PROTECTED] sent: FBSD 5.1: Using Bind9.2.2, and I have query logging turned on: logging { channel querylog { file /var/log/query.lo~g; print-time yes; }; category queries { querylog; }; }; After a logrotate, it stops

Re: FreeBSD 5.1 Installation Problem

2003-09-08 Thread mess-mate
IMHO, simply repeat the operation ( selecting the cdrom) mess-mate On Mon, 08 Sep 2003 19:48:18 +0200 Reinhart Steyaert [EMAIL PROTECTED] wrote: | Hi, | | I want to install FreeBSD 5.1 but have the following problem: during the | installation, you have to choose Installation Media. I choose

  1   2   >