On Wed, 10 Sep 2003, LALEKAN ODOFFIN wrote:
> i don't know the NIC details and its kinda difficult
> for me to get it.
> but assuming i get it what do i do with the details.
> Just lead me on.
> i will do anything to get it on.
hi,
you can get the NIC details using pciconf -l -v as root. when
On Wednesday 10 September 2003 06:25 pm, Lewis Thompson wrote:
> Hi,
>
> I've just purchased a new machine (a micro-ATX machine) with an
> nforce2 board. After a little searching on Google/Groups it looks to
> still be pretty much unsupported. Can anybody give a run-down of the
> how each aspec
I'm trying to concatenate two disk using vinum on FreeBSD 5.1-RELEASE and
want to make sure I am doing everything correctly.
I have two drives, a 30 gig and a 40 gig. I have vinum setup and running
on the 40 gig right now. I would like to copy information from the 30 gig
to the 40 gig, Then concat
I was mount smb file system with mount_smbfs -c l, but file and
folder names are don't convert to lowercase, whats wrong?
Why uppercase and lowercase names are identical when I will create file with
name in another case?
--
Best regards,
anton mailto:[EMAIL PROTECTED]
I recently did a binary upgrade to 5.1 and downloaded the new kernel source, however
after editing the config file (LOWFAT) when I run "make depend" it always errors out
with this.
c/sys/modules/aic7xxx/ahd/../../../dev/aic7xxx/aic79xx.seq
../aicasm/aicasm: Stopped at file aic79xx.reg, line 3942
Having problem with sendmail in free BSD ,any solution pls
I am trying to send mails thru my console using the below
server # sendmail -v [EMAIL PROTECTED] < test (test is an text file )
I am getting the following error
[EMAIL PROTECTED] Connecting to localhost.mydomain.com. via rel
Hello,
Excuse me if this seems a bit off but I was just wondering what you pro's use as a
graphical Terminal Emulator in *nix? Is there anything similar to the features of
Vandyke SecureCRT for Windows? You know, one that you can create Logon Scripts (in
app, without using shell scripts), save
On Wed, Sep 10, 2003 at 08:28:11PM -0700, daniel meg wrote:
[...]
> # SCSI peripherals
> #device scbus # SCSI bus (required)
> #device da # Direct Access (disks)
[...]
> deviceumass # Disks/Mass storage - Requires scbus
You have complete backups, right? You probably should have a test
server where you can test the software upgrade under non-production
conditions...
Yes of course. I am 1/2 way through a 4 month stint on the road and all
I have is a laptop...
___
[
I am running FreeBSD 4.8 RELEASE, and intended to recompile kernel for apm support and
minize the kernel size.
When I run make against the ../../compile/HACKEDKERNEL, it return bunch of errors and
I just can't copy the errors(I don't know why my system can't and I enabled the mouse
daemon alre
William O'Higgins wrote:
I recently installed FreeBSD 4.8 on a ThinkPad 600X. The install seemed
to go fine, but when I reboot and I look at the menu, I have two choices
- F1 DOS, F2 FreeBSD. There is nothing on the DOS partition, so I want
to press F2.
There isn't any response however. If I h
Hi guys,
I have a few questions.
What are the specific advantages of using a kernel PPP
over user PPP?
I use the command ppp -ddial papchap. This, I am told,
establishes a "stable" connection (i.e reconections
are handled automatically). How do I hang up? Just
switch the modem off? (of course I co
Thanks to Heiko, Rex, David and Mark,
I got my internet connection working. Problem was, I
didn't know which port the modem was connected to.
I tried /dev/cuaa0 & it worked.
Thanks guys
Sincerely
Keshav
Want to chat instantl
Hi. I need an advice on how to set-up a RAS on FreeBSD.
We were previously using BSDi with a Digiboard PC XEm
pci card conneted to a digibox with about 40 - 50 modems
on our RAS server. BSDi has a ppp shell which we assign
to new users when their accounts are created. And their
dial-up session
On Thu, Sep 11, 2003 at 11:27:15AM +1000, zhao wrote:
> So it seems my package installation is not very successful. In this case,
> can you please help out on this?
If you are using a csh-derived shell, use the 'rehash' command to rescan the path.
Kris
pgp0.pgp
Description: PGP signature
Dear FreeBSD people,
I have a cvsup package installation problem, need your precious help
urgently.
I have a FreeBSD4.3-release mail server, I need to to upgrade to
4.7-release inorder to configure SMTPAUTH feature.
According to the article on internet of http://people.freebsd.org/~jdp/s1g/
For
On Wed, 10 Sep 2003, George wrote:
> On Mon, Sep 08, 2003 at 07:36:01AM +0900, Alexander Nedotsukov wrote:
> > As a quick olution apply this in to libart_lgpl2.
>
> The offending asserts have been commented out pending further review and
> fixage later. The release that does this is 2.3.16 of lib
On Wed, Sep 10, 2003 at 05:11:58PM -0700, Joseph Yuen wrote:
> Got a simple question.
> on my 80G harddrive, I originally had 4G files in it
> and I used rm command to remove it all. Now my drive
> should be totally empty.
>
> But this is what I found when I typed df -H
>
> /dev/ar0s1e 79G 2.0K 7
Got a simple question.
on my 80G harddrive, I originally had 4G files in it
and I used rm command to remove it all. Now my drive
should be totally empty.
But this is what I found when I typed df -H
/dev/ar0s1e 79G 2.0K 72G 0% /mountpoint
and if I typed df only without the -H parameter
/dev/ar0s
4.9-PRE is just -STABLE. Install 4.8-RELEASE, cvsup your souce (RELENG_4 is
the tag you want), do a make buildword, etc. and you will have 4.9-PRE. You
can also install the latest snapshot, but I'm not going to go into that
here.
> How would I go about getting 4.9 RC or pre release whatever it is
On Mon, Sep 08, 2003 at 07:36:01AM +0900, Alexander Nedotsukov wrote:
> As a quick olution apply this in to libart_lgpl2.
The offending asserts have been commented out pending further review and
fixage later. The release that does this is 2.3.16 of libart_lgpl (nothing
else was changed). Note th
On Wed, Sep 10, 2003 at 04:43:31PM -0700, Drew Tomlinson wrote:
> I don't have a /usr/ports/MOVED on my system. Am I supposed to be
> looking on the FBSD web site somewhere?
Then you don't have the (complete) ports collection installed.
> I did find the cvsweb stuff but do not understand what I
On Wednesday 10 September 2003 06:42 pm, Ben Dover wrote:
> How would I go about getting 4.9 RC or pre release whatever it is called.
> I have spoken to a few people who are running it and even saw a dedicated
> server business who was offering it. It's not in the i386 ISO folder so
> I'm assumin
On Wed, 2003-09-10 at 15:28, Kris Kennaway wrote:
> On Wed, Sep 10, 2003 at 03:18:54PM -0700, Drew Tomlinson wrote:
> > The portversion command shows that graphics/gd2 no longer exists.
> > However the FBSD web site still shows it as a port. Yet when I click on
> > "sources" in the listing, I get
How would I go about getting 4.9 RC or pre release whatever it is called. I
have spoken to a few people who are running it and even saw a dedicated
server business who was offering it. It's not in the i386 ISO folder so I'm
assuming I can't get an ISO and it has to be cvsup'ed. What would I n
On Wednesday 10 September 2003 06:15 pm, Ricardo Javier Aranibar León wrote:
> Hi list,
>
> I bougth FeeBSD4.8 (april 2003) from FreeBSDMall, I'm newbie with this
> operative System, I installed Apache, PostgreSQL and PHP but when I like
> connect in my script php with postgresql I have this error:
Please see http://www.php.net/manual/en/ref.pgsql.php, Section
'Installation'. You may also want to take a general look at the PHP
documentation.
Phil.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ricardo Javier
Aranibar León
Sent: Thursday, September 11
Hi,
I've just purchased a new machine (a micro-ATX machine) with an
nforce2 board. After a little searching on Google/Groups it looks to
still be pretty much unsupported. Can anybody give a run-down of the
how each aspect is? The board I have has onboard GeForce4 MX (which I
know will work wi
I have a machine that multi-boots with separate ata disks for each OS.
I'd like to have FreeBSD (5.1) spin down the other disk to reduce heat
and noise, since it doesn't use it at all. I haven't been able to find
anything in the apm, ata, or acpi documentation I could find. How do I
accomplish t
culley harrelson wrote:
I am a little shaky in the knees at this prospect. This is on a
production web server getting over 1 million page views per day. I use
mod_php4, mod_auth_pgsql, mod_gzip, mailman, and I have some other ports
installed like squirrelmail, mnogosearch, a bunch of pear libr
Hi list,
I bougth FeeBSD4.8 (april 2003) from FreeBSDMall, I'm newbie with this
operative System, I installed Apache, PostgreSQL and PHP but when I like
connect in my script php with postgresql I have this error:
Fatal error: call to undefined function pg_connect, I run my script with
phpinfo()
Has anyone gotten Crossover Office 2 to run under FreeBSD,
either Release 4 or Release 5? I haven't.
The first version of Crossover Office ran fine under Linux
emulation on FreeBSD, but I can't get CXOffice 2 to run either
under "linux_base" or "linux_base-8". It complains that
"
On Wed, Sep 10, 2003 at 03:18:54PM -0700, Drew Tomlinson wrote:
> The portversion command shows that graphics/gd2 no longer exists.
> However the FBSD web site still shows it as a port. Yet when I click on
> "sources" in the listing, I get "Port "ports/graphics/gd2" does not
> exist." on the web.
Hello,
Is there any patch for the sk driver to support the 3c940 gigabit
ethernet card ? I see that OpenBSD is supporting it in their sk driver
so I was wondering if this was ported to FreeBSD as well.
Is there any way to get the card to work ?
I'm running FreeBSD 5.1 release.
Thanks,
Marian
The transition is easy.
1) deinstall all your ports(modules) depended on apache13
2) install apache13-modssl.
3) recompile all ports(modules)
You can use apache13-modssl just as a replacment to apache13.
But apache13-modssl uses extrand API, so you have to
recompile all apache modules with "apa
The portversion command shows that graphics/gd2 no longer exists.
However the FBSD web site still shows it as a port. Yet when I click on
"sources" in the listing, I get "Port "ports/graphics/gd2" does not
exist." on the web. So I assume this port was recently removed?
I've used Google but haven'
On Sun, 7 Sep 2003 [EMAIL PROTECTED] wrote:
> Hi everyone,
>
> I am trying to find out how to get sound configured on my machine with
> FreeBSD 4.8 (or even 5.1) for that matter. I have a Creative
> Soundblaster Live! card. I added sound to the kernel, rebooted, and
> made the device(for 4.8).
I have just recently upgraded my 4.7 server to RELENG_4_8
I have been trying to compile neon 0.24.1 but I keep getting
errors from krb5-config.
vhalomcvs1# krb5-config --cflags
-I/usr/include @INCLUDE_des@
Is this a known issue? I have done some searching and
found little information about
Hi
I would like to be able to use the Windows Key as "Meta" while using syscons
- it much easier to reach then escape. I have found out with xev that the
scancode of this key is 115. After this I opened the German-Iso-Keymap with
an editor and found out that there are 108 lines with numbers and f
I tried configuring the second network card and i
cannot find it using sysinstall.
Try this from the command line:
ifconfig -a
Then take a look in /etc/rc.conf to see how sysinstall set
up the first interface and you may be able to work
out how to configure the other one... It is also
possible t
hell all, i have freebsd 4.7 but due to the firewall
configuration in my school, i can't be able to cvsup.
if i want to upgrade to 4.8 or update all the security
patch?
what should i need to do?
is there anyway to update the src and ports
application without using cvsup?
thanks for looking and answ
I have a system running 5.1-RELEASE-p2 with several jails. Occasionally
I want to determine which jail a given process belongs to. On -STABLE
I could just cat /proc//status and look at the final entry. But
with 5.x procfs id deprecated; so I'd like to find some other way. Any
help would be appr
James <[EMAIL PROTECTED]> writes:
> I'm currently trying to install version 5.0-CURRENT,
> my problem is that when I boot off of the CDROM, it
> starts loading fine, probes the hardware, then
> it comes up with the message:
>
> ata0: resetting devices
>
> at which point it hangs. I have d
James wrote:
Hello,
First and foremost i'm new to using FreeBSD, so forgive the newbie cry for
help. But I do have experience on Linux, so know my way about a *nux
environment.
I'm currently trying to install version 5.0-CURRENT, my problem is that when
I boot off of the CDROM, it starts loading
On Wed, Sep 10, 2003 at 04:52:43PM +0200, Hasse Hansson wrote:
> > icmp redirect from 65.104.98.146: 204.152.184.189 => 65.104.98.145
is 65.104.98.146 your default router? it tells you that there is
a better way to the network 204.152.184.189.
hth,
toni
--
Kann man etwas nicht verstehen, dann ur
Thus spake James ([EMAIL PROTECTED]) [10/09/03 14:13]:
> First and foremost i'm new to using FreeBSD, so forgive the newbie cry for
> help. But I do have experience on Linux, so know my way about a *nux
> environment.
I moved from Linux to FreeBSD a while ago. There's some finer things that
aren'
In the last episode (Sep 10), Linus Sjberg said:
> I have a problem with my FreeBSD-box acting as a NIS-client against
> company NIS-servers.
>
> Everything works smoothly except for the NIS-master repeatedly logging
> Sep 10 20:27:00 ypmaster ypserv[14194]: refused connect from 192.168.1.12:655 t
Hello,
First and foremost i'm new to using FreeBSD, so forgive the newbie cry for
help. But I do have experience on Linux, so know my way about a *nux
environment.
I'm currently trying to install version 5.0-CURRENT, my problem is that when
I boot off of the CDROM, it starts loading fine, probes
Hi!
I have a problem with my FreeBSD-box acting as a NIS-client against company
NIS-servers.
Everything works smoothly except for the NIS-master repeatedly logging
Sep 10 20:27:00 ypmaster ypserv[14194]: refused connect from
192.168.1.12:655 to procedure ypproc_order (my.domain,master.passwd.by
+-- Shrikant [freebsd] [10-09-03 11:26 IST]:
| When i send email from freebsd machine i reviece the email in by inbox with from
as the User Name and email id as [EMAIL PROTECTED] ,If i want to change the email as
[EMAIL PROTECTED] or Domain Services etc etc
| How do i go about and what ch
raidstatus.sh
#!/bin/sh
/raidutil -L all |mailx -s "Raid Status" root
-
Add that script to the root crontab, and it will output the status of the
raid and send an email to root how ever often you want/need it. Now,
granted, this may not indicate a direct fa
[I'm not on the -questions mailing list, so please include me in any
replies. Thanks]
I am running FreeBSD 5.1-RELEASE on a dual Xeon 2.4GHz system (SMP
enabled in the kernel) with an ATI All-in-Wonder Radeon 9000 video card
and have XFree86 4.3.0 + GDM2 compiled and installed.
Everything seems t
Hi Michael,
Thanks for the prompt response ... it was my bad to send you an email
before googling. :-)
I have managed to install the tool right after the email.
Do you happen to use any script which will notify the health of the raid
?
I have done some researching the only script which i found w
- Original Message -
From: "Edy Lie" <[EMAIL PROTECTED]>
To: "Micheal Patterson" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, September 10, 2003 9:05 AM
Subject: Re: FreeBSD and Hot Swap rebuild on SCSI disks.
> Hi Michael,
>
> Thanks for the reply. I have tried to searc
Why would this be happening, and how can I fix this - the man subsystem
hasn't been working because of this for a while. This is
FreeBSD-4.9-Prerelease:
# gdb man man
GNU gdb 4.18 (FreeBSD)
This GDB was configured as "i386-unknown-freebsd"...(no debugging symbols
found)...
/usr/share/tmac/man
Hi everybody.
> uname -a
FreeBSD thor.swedehost.com 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #0: Sun
Aug 31 22:08:22 CEST 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/THOR i386
I 've got a message in my logfiles that I don't understand.
odin.swedehost.com kernel log messages:
> icmp redirect fr
Hi Michael,
Thanks for the reply. I have tried to search raidutil in /usr/ports but
i could not find any.
Is that in FreeBSD ports or do i need to compile it manually from
somewhere ?
Thank you.
Best Regards,
Edy Lie
On Wed, 2003-09-10 at 01:25, Micheal Patterson wrote:
> - Original Message
Hi gurus!
I have a remote FreeBSD computer (RELEASE 4.7 stable). It is on the
other side of Earth. I can access it only with ssh.
It is really a base system. The ports collection (/usr/ports) is
entirely missing. I'm familiar with installing ports. But I have
no idea how to install the ports c
Ok, I got jdk13 installed from the ports, this is what I did
I first got rid of other versions of jdk as suggested by Simon, that didnt
work. Then I had a look at the Makefile and noticed this line
JDK13DIR= ${LOCALBASE}/linux-blackdown-jdk${JDK_VERSION}
so I installed linux-blackdown-jdk
Hi People !
The problem persists This machine is connected via sf0 to an link
off 2.5Mbit/s but the max transfer reached is olny 512Kbit/s.
Someone known where could I find some help or who could help me ?!
Regards,
Alexandre
- Original Message -
From: "Alexandre Bianc
On Wed, 10 Sep 2003, LALEKAN ODOFFIN wrote:
> Hi there,
> i wish to set up squid on my BSD box and i configured
> one of the network cards when i needed to do the
> installation (cos i installed from the FTP server via
> the floppy disks).
> I tried configuring the second network card and i
> cann
I made the same transition... I had apache13 installed from ports,
and then found myself in need of SSL support.
I didn't uninstall apache13, I simply went to the apache13-modssl port
and typed: make all install clean
No problems. There was a new httpsd.conf file under my /usr/local/etc/apache
di
I recently installed FreeBSD 4.8 on a ThinkPad 600X. The install seemed
to go fine, but when I reboot and I look at the menu, I have two choices
- F1 DOS, F2 FreeBSD. There is nothing on the DOS partition, so I want
to press F2.
There isn't any response however. If I hit F1 it tries to boot t
Hi there,
i wish to set up squid on my BSD box and i configured
one of the network cards when i needed to do the
installation (cos i installed from the FTP server via
the floppy disks).
I tried configuring the second network card and i
cannot find it using sysinstall.
please is there a way for me t
Nagy L?szl? Zsolt wrote:
>
> Hi gurus!
>
> I have a remote FreeBSD computer (RELEASE 4.7 stable). It is on the
> other side of Earth. I can access it only with ssh.
> It is really a base system. The ports collection (/usr/ports) is
> entirely missing. I'm familiar with installing ports. But I
On Tue, 9 Sep 2003, at 12:17:54, Mark Terribile wrote:
> Well, I've got my 120G disk up and running and
> now I'd like to understand something odd.
>
> I went into /stand/sysinstall to put down the
> partition and slice tables and the FS and found that
> it determined the geometry (c
On Wed, Sep 10, 2003 at 12:16:09PM +0200, Stijn Hoop wrote:
> I'm trying to find out how to replace a drive in a vinum RAID-5 volume
> that's still working. I have the following volume (copied by hand, sorry):
>
> V local State: up Plexes: 1 Size: 167 GB
> P loc
Nagy László Zsolt wrote:
Hi gurus!
I have a remote FreeBSD computer (RELEASE 4.7 stable). It is on the
other side of Earth. I can access it only with ssh.
It is really a base system. The ports collection (/usr/ports) is
entirely missing. I'm familiar with installing ports. But I have
no idea h
Hi gurus!
I have a remote FreeBSD computer (RELEASE 4.7 stable). It is on the
other side of Earth. I can access it only with ssh.
It is really a base system. The ports collection (/usr/ports) is
entirely missing. I'm familiar with installing ports. But I have
no idea how to install the ports co
Hi gurus!
I have a remote FreeBSD computer (RELEASE 4.7 stable). It is on the
other side of Earth. I can access it only with ssh.
It is really a base system. The ports collection (/usr/ports) is
entirely missing. I'm familiar with installing ports. But I have
no idea how to install the ports co
Sorry for this question not only about FBSD.
On my FreeBSD, I use mutt.
I have configured it to use the postpone feature.
.muttrc :
set postpone=ask-yes
set recall=ask-yes
set postponed="/var/mail/MaildirKmaster/postponed"
It works fine : I c
Michael A. Alestock wrote:
I'm planning on upgrading to a most recent version of FreeBSD (v4.7 to
v4.8). I plan on backing up data before doing so. Which configuration
files (or filesystem[s]) should I backup ?? /, /etc, /var, /usr ??? I'm
excluding "/usr/home" because that's standard anyways.
Hi,
I'm trying to find out how to replace a drive in a vinum RAID-5 volume
that's still working. I have the following volume (copied by hand, sorry):
V local State: up Plexes: 1 Size: 167 GB
P local.p0 R5 State: up Subdisks: 4 Size:
I'm planning on upgrading to a most recent version of FreeBSD (v4.7 to
v4.8). I plan on backing up data before doing so. Which configuration
files (or filesystem[s]) should I backup ?? /, /etc, /var, /usr ??? I'm
excluding "/usr/home" because that's standard anyways.
>> Michael A., USA
___
Dear Mr. Long,
thanks a lot for taking the time to respond
- especially given that you're on vaccations and
that it's almost 2 a.m. your time.
I apologize for having used vague formulations in my
past mail. Also, perhaps I have made up wrong meanings
for some vocabulary occuring in the driver's c
There is a lame virus (probably written in VB judging by the size of the
file) who keeps hitting the smtp servers, and I noticed it in the
freebsd lists. It has attachments like .pif and .scr.
I also noticed it filled my e-mail box with 67.5 Mb in just 3-4 days.
Now that was nice. It spreads u
On Tue, Sep 09, 2003 at 07:59:01PM +0200, Hendrik Hasenbein wrote:
> Christoph P. Kukulies wrote:
> >Only drawback, which probably cannot be solved, to automatically unmount
> >:-)
> >when the user is about to pull the stick.
> >
> >Is there a detach line?
>
> Yes, there is. But it is too late. I
On Wed, 10 Sep 2003, Shrikant wrote:
> I am using sendmail ,can u pls suggest the changes .
>
edit sendmail.cf at the point that says:
#who i masquerade as
DMdomain.com
add domain.com i.e your domain just next to DM as above and restart
sendmail.
Joseph.
[ On Sun, 07 Sep, 2003 at 16:43, Jeremy R Brinkley wrote: ]
> I'm looking to do some wardriving.
Look Kismet and WifiScanner : tools to audit and analyze Wireless traffic.
> I have a cisco aironet 350 pcmcia card
> and was wondering if I can capture raw packets in ethereal or ettercap.
On Wed, 10 Sep 2003, Shrikant wrote:
> When i send email from freebsd machine i reviece the email in by inbox with from
> as the User Name and email id as [EMAIL PROTECTED] ,If i want to change the email
> as [EMAIL PROTECTED] or Domain Services etc etc
> How do i go about and what chang
80 matches
Mail list logo