On Fri, Sep 12, 2003 at 02:49:51PM -0700, [EMAIL PROTECTED] wrote:
Dear Freebsd,
I have installed freebsd 4.4 (the ones that came with the manual.) I
Which manual is that? There's a paper version of the handbook, but that
doesn't come with a CD. I know that FreeBSD Unleashed comes with
Lei Luo [EMAIL PROTECTED] writes:
I am new to FreeBSD and just trying to learning something. I installed
FreeBSD without X system on my computer and it works fine. But when I
tried to configure mouse and X windows, I had big problem.
As instructed in the handbook, I configured the type and
On Sat, 13 Sep 2003 12:31:19 -0400, Bob Hall [EMAIL PROTECTED] wrote:
On Fri, Sep 12, 2003 at 02:49:51PM -0700, [EMAIL PROTECTED] wrote:
Dear Freebsd,
I have installed freebsd 4.4 (the ones that came with the manual.) I
Which manual is that? There's a paper version of the handbook, but that
Hi, everyone,
I am new to FreeBSD and just trying to learning something. I installed FreeBSD without
X system on my computer and it works fine. But when I tried to configure mouse and X
windows, I had big problem.
As instructed in the handbook, I configured the type and port of the mouse (PS2,
I just bought a ATI Radeon 9200, XFree86.org says that XFree86 4.3.0
will handle any radeon card however I can't get mine to work correctly
under FreeBSD 4.8 or 5.1. The only driver I could get it to work with
is the vesa driver, and as you can image it looks like crap. Could
someone provide me
, September 02, 2003 3:36 PM
Subject: Need help with strange routing situation
I recently switched to a new DSL provider (DSLExtreme), and in doing so,
decided to opt to buy multiple static IP's. The idea is that I would like
one static IP for the server, and separate static IP's for our desktop
Hi,
I am compiling a program with 4 static libraries. If I compile the program
by using gmake with its Makefile, an excutable is made without any errors.
However, the excutable exited on signal 6 when I ran it. If I compile the
program by running the compilers (f95 and cc) by hand, the excutable
On Tue, 2003-09-02 at 22:45, Philip Kizer wrote:
Donald Burr of Borg [EMAIL PROTECTED] wrote:
[Description of:]
Our gateway machine and server gets its own IP, IP A.
My desktop machine is hooked up via ethernet. It should get IP B.
Same thing as above for my roomie's desktop,
I recently switched to a new DSL provider (DSLExtreme), and in doing so,
decided to opt to buy multiple static IP's. The idea is that I would like
one static IP for the server, and separate static IP's for our desktop
machines, so that things such as IRC DCC, streaming media, etc. will just
work
Donald Burr of Borg [EMAIL PROTECTED] wrote:
[Description of:]
Our gateway machine and server gets its own IP, IP A.
My desktop machine is hooked up via ethernet. It should get IP B.
Same thing as above for my roomie's desktop, except it gets IP C.
[all else] Ideally I'd like them
On Sun, Aug 17, 2003 at 10:23:53PM +, kristof wrote:
Hi,
I'm trying to get mldonkey working but I don't really know what I'm doing wrong.
Fisrt I got the error of no servers in servers.ini but was able to solve this by
copying the servers.ini in the ../distrib dir over the other ones.
Hi,
I'm trying to get mldonkey working but I don't really know what I'm doing wrong. Fisrt
I got the error of no servers in servers.ini but was able to solve this by copying the
servers.ini in the ../distrib dir over the other ones. now I can see a list of all the
servers in the browsers but I
On Mon 18 Aug 2003 00:01:44 +0200
kristof [EMAIL PROTECTED] wrote:
Hi,
I'm trying to get mldonkey working but I don't really know what I'm
doing wrong. Fisrt I got the error of no servers in servers.ini but
was able to solve this by copying the servers.ini in the ../distrib
dir over the
Hi,
I don't really think you tip had effect, but thx anyway.
The weird thing is that when I change the configuration to wich networks it may
connect, include soulseek end fasttrack, these server our found almost directly. But
it is so that my servers.ini list contains about 6700 donkey servers,
On Tuesday, 12 August 2003 at 0:53:06 +0200, Per olof Ljungmark wrote:
Have production server harddisk problem, initially one disk (da5) was
down, then replaced. When trying to add a new (hotswap) drive according
to http://www.vinumvm.org/vinum/replacing-drive.html ,
the system stopped and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi !
I really need help with this.
I have an USB-2.0 external adapter where I plugged in a hard drive.
When I boot with everything plugged-in, it works, but as soon as I unplugg it
or boot without the hard drive plugged-in, I cannont mount
Have production server harddisk problem, initially one disk (da5) was
down, then replaced. When trying to add a new (hotswap) drive according
to http://www.vinumvm.org/vinum/replacing-drive.html ,
the system stopped and came up in the state seen below. Is there a way
to get it back up or should
My name is Lucas Griglicki
Address: Poland, Minsk Maz Warszawska Street 196 flat 30
Email Address: [EMAIL PROTECTED]
WHERE ELSE CAN I SEARCH FOR HELP WHERE ELSE CAN I SEARCH FOR HELP WHERE
ELSE CAN I SEARCH FOR HELP WHERE ELSE CAN I SEARCH FOR HELP
On Friday 25 July 2003 10:09 pm, marlon corleone wrote:
hi guys, download fluxbox how do i import it to my
.xinitrc? so i can use two X desktop at a time. here's
my .xinitrc looks like.
im running FreeBSd 5.1-RELEASE
Two desktops? If you really want to run both Window Maker and Fluxbox
at
hi guys, download fluxbox how do i import it to my
.xinitrc? so i can use two X desktop at a time. here's
my .xinitrc looks like.
im running FreeBSd 5.1-RELEASE
thanks!
Akira# cat .xinitrc
xterm
[ ! -d $HOME/GNUstep/Library/WindowMaker ]
/usr/X11R6/bin/wmaker.inst
exec /usr/X11R6/bin/wmaker
Thomas Beutler wrote:
Hi everyone!
I'm a total stranger to the Unix world... too long have I dwelled in the
Windows area, and now I'm searching
for new horizons and worlds to explore... the Unix world. I looked around
and found FreeBSD interesting
enough to install... and here I am with a
Hi everyone!
I'm a total stranger to the Unix world... too long have I dwelled in the
Windows area, and now I'm searching
for new horizons and worlds to explore... the Unix world. I looked around
and found FreeBSD interesting
enough to install... and here I am with a strange problem:
I installed
Hello,
On Sat, 2003-07-05 at 11:56, Thomas Beutler wrote:
Hi everyone!
I'm a total stranger to the Unix world... too long have I dwelled in the
Windows area, and now I'm searching
for new horizons and worlds to explore... the Unix world. I looked around
and found FreeBSD interesting
In bish.lists.freebsd.questions, you wrote:
Third task was to get my email work... and now the problems begins.
I own the domain beutler.se, and my computers name is visthusboden.
The server accepts incoming mail all right - no problems there... BUT...
...whatever I do, all outgoing mail
On Sat, Jul 05, 2003 at 01:56:25PM +0200, Thomas Beutler wrote:
The server accepts incoming mail all right - no problems there... BUT...
...whatever I do, all outgoing mail get the address
[EMAIL PROTECTED] instead of [EMAIL PROTECTED]
You need to build yourself a customised sendmail
Sendmail is a big, complex program ... I'm sure if you had the time,
you could make it wash dishes for you.
There are a gazillion howtos and explanations for configuring sendmail
all across the internet.
Considering the fact that you're using FreeBSD, I recommend the one
specifically written for
On Sat, Jul 05, 2003 at 01:43:50PM +0100, Jamie Jones wrote:
In bish.lists.freebsd.questions, you wrote:
Sendmail is a big, complex program ... I'm sure if you had the time,
you could make it wash dishes for you.
Now *that's* the URL i want!
Not sure about washing dishes, but sendmail
On Sat, Jul 05, 2003 at 01:56:25PM +0200, Thomas Beutler wrote:
The server accepts incoming mail all right - no problems there... BUT...
...whatever I do, all outgoing mail get the address
[EMAIL PROTECTED] instead of [EMAIL PROTECTED]
You need to build yourself a customised sendmail
I am running mozilla 1.4 on freebsd under linux emulation. I need spell
checking for the email client so i went to the following site to install it.
http://spellchecker.mozdev.org/installation.html
At the site above i choose the l.4 install, it said it installed ok but
there is no spell check.
Hello,
I recently split up my FreeBSD server into two machines. One is a small
ITX based system than [is intended to] handle audio and home automation.
I installed nasd 1.6 on this machine, and it appears to be loaded (I can
telnet to port 8000 and it connects), but I can't actually use it. So
output of uname :
FreeBSD 4.7-RELEASE FreeBSD 4.7-RELEASE #0: Wed Oct
9 15:08:34 GMT 2002 [EMAIL PROTECTED]:
/usr/obj/usr/src/sys/GEMERIC i386
Problem:
I have installed FreeBSD . While installing the X
windows i m receving the error messages.
1)
GARInit:Unable to open /dev/agpgart (Device
I just got a call from my ISP telling me that my DSL has been
disconnecting and reconnecting every 3 minutes for the past few months,
and that this is putting a heavy load on their servers. They're
considering charging me for all this extra bandwidth, as they're certain
that the problem is on my
Configuration looks fine... What does the ppp.log file show?
Peter
At 04:14 PM 6/5/2003 -0400, you wrote:
I just got a call from my ISP telling me that my DSL has been
disconnecting and reconnecting every 3 minutes for the past few months,
and that this is putting a heavy load on their servers.
Adam said:
I just got a call from my ISP telling me that my DSL has been
disconnecting and reconnecting every 3 minutes for the past few months,
and that this is putting a heavy load on their servers. They're
considering charging me for all this extra bandwidth, as they're certain
that the
On Thu, 2003-06-05 at 16:37, Christian Sauer wrote:
according to the man page ... by default the PPP connection times out
after 3 mins. It suggests using set timeout 0 to disable it. try
adding that to the ppp.conf file.
Thanks for the tip. I'll give it a try and see what happens.
--
Adam
On Thu, 2003-06-05 at 16:14, Adam wrote:
I just got a call from my ISP telling me that my DSL has been
disconnecting and reconnecting every 3 minutes for the past few months,
and that this is putting a heavy load on their servers. They're
considering charging me for all this extra bandwidth,
On 05 Jun 2003 18:42:39 -0400
Adam [EMAIL PROTECTED] wrote:
So, either my firewall is too strict, or the remote end isn't
responding to the LQR packet. Disabling LQR has fixed the problem, but
now I wonder if I am losing out by now utilizing LQR? Could it have
been my firewall that was
On Thu, 2003-06-05 at 19:40, Clement Laforet wrote:
It seems to be a ppp 3.1 problem. I have got the same problem when I
upgrade my gateway from 4.3 to -STABLE.
It had been discussed on freebsd-net@ few weeks ago, look at archives ;)
If you want to see lqr again, you need to downgrade.
I'm
On 05 Jun 2003 19:46:15 -0400
Adam [EMAIL PROTECTED] wrote:
On Thu, 2003-06-05 at 19:40, Clement Laforet wrote:
It seems to be a ppp 3.1 problem. I have got the same problem when I
upgrade my gateway from 4.3 to -STABLE.
It had been discussed on freebsd-net@ few weeks ago, look at
On Mon, Mar 31, 2003 at 01:02:51PM +0100, Mike Doyle wrote:
sis900.c: v1.08.06 9/24/2002
divert: allocating divert_blk for eth0
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 12,
I'm having a little problem with my ISP. They said they would lease me a new
rack-mounted server and put FreeBSD on to it. However, they were unable to
get it to recognize certain parts of the hardware (specifically getting errors
on the network cards not being initialized correctly).
In the end,
Try to recompile your kernel with device rdp or rl
look at LINT there is a big section wich describes RealTek
RedHat found it becouse when it boots
it load modules for support hardware
If it does'n work try to port driver from
linux to FreeBSD
it isn't very difficult
On Mon, 31 Mar 2003, Mike
On Monday 31 March 2003 07:02 am, Mike Doyle wrote:
I'm having a little problem with my ISP. They said they would lease me a
new rack-mounted server and put FreeBSD on to it. However, they were unable
to get it to recognize certain parts of the hardware (specifically getting
errors on the
Hello, I'm using a belkin wireless router for my home network, and I had
DHCP enabled on the belkin routher, with this all I needed was to put
this line on my /etc/rc.conf file: ifconfig_fxp0=DHCP and I was able
to browse the internet without any problems now I decided to disable
DHCP on my
ifconfig_fxp0=inet 192.168.2.72
Try something like
ifconfig_fxp0=inet 192.168.2.72 netmask 255.255.255.0
defaultrouter=192.168.2.1 # ip of your router
Victor
--
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
On Wed, Mar 26, 2003 at 05:18:40PM -0500, Edinho wrote:
[...]
I'm using FBSD4.8 stable, my belkin router uses 192.168.2.1, subnet mask
is 255.255.255.0 and the gateway is also 192.168.2.1.
Here's how my rc.conf looks like now:
hostname=ecerejo.Belkin
ifconfig_fxp0=inet 192.168.2.72
ifconfig_fxp0=inet 192.168.2.72/24
defaultrouter=192.168.2.1
Ok thanks. I actually figured it out after I sent question but used
/stand/sysinstall to cinfigure my network interface and ended up with
these two settings in my rc.conf:
ifconfig_fxp0=inet 192.168.2.72 netmask 255.255.255.0
what's the diference between ifconfig_fxp0=inet 192.168.2.72/24 and
ifconfig_fxp0=inet 192.168.2.72 netmask 255.255.255.0?
Two different ways of saying the same thing. I believe the former is
CIDR notation.
Victor
--
[EMAIL PROTECTED]
___
[EMAIL
On Wed, Mar 26, 2003 at 05:54:12PM -0500, E. J. Cerejo wrote:
what's the diference between ifconfig_fxp0=inet 192.168.2.72/24 and
ifconfig_fxp0=inet 192.168.2.72 netmask 255.255.255.0?
Its easier to type /24 than 255.255.255.0. The /24 says set first 24
bits of netmask. It doesn't work with
Hello !
I tried to install FreeBSD on my computer, but I failed in the worst way I
could: I didn't take serious your advise to back-up my data...
Well, I tried to install FreeBSD on a partition on my IDE drive. I must say
that I had 4 partitions on a harddrive with 20GB. I used fdimage to make
On Thursday 06 March 2003 11:08 pm, Mihai Mateescu wrote:
Hello !
I tried to install FreeBSD on my computer, but I failed in the worst way I
could: I didn't take serious your advise to back-up my data...
ooh, bad idea ;)
Well, I tried to install FreeBSD on a partition on my IDE drive. I
Hello,
I'm trying to SMBus to work on my new Supermicro
server, but with no luck.
It's got a Serverworks III HE chipset, with CSB5
southbridge. My understanding is that this is supposed
to be compatible with Intel PIIX4 chip but unfortunately
the 'intpm' driver isn't doing it for me. No
On Tue, 18 Feb 2003, Shantanu Mahajan wrote:
+++ . Saevio . [freebsd] [16-02-03 23:21 -0800]:
| Date: Sun, 16 Feb 2003 23:21:17 -0800
| From: . Saevio . [EMAIL PROTECTED]
| Subject: Need help formatting HDD
|
| Hi All,
|
| Sorry to write a F-BSD list with this, but i figured you would
+++ . Saevio . [freebsd] [16-02-03 23:21 -0800]:
| Date: Sun, 16 Feb 2003 23:21:17 -0800
| From: . Saevio . [EMAIL PROTECTED]
| Subject: Need help formatting HDD
|
| Hi All,
|
| Sorry to write a F-BSD list with this, but i figured you would know.
| I have a IBM Deskstar 30gb, with FreeBSD 4.x
On 2003-02-16 23:21, . Saevio . [EMAIL PROTECTED] wrote:
Sorry to write a F-BSD list with this, but i figured you would know.
I have a IBM Deskstar 30gb, with FreeBSD 4.x on it, and i need to
remove it so i can install the HDD in a friends system. However
after trying with format.com and
Hi All,
Sorry to write a F-BSD list with this, but i figured you would know.
I have a IBM Deskstar 30gb, with FreeBSD 4.x on it, and i need to remove it
so i can install the HDD in a friends system. However after trying with
format.com and fdisk.exe it wont even recognize the partition.
How
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of . Saevio .
Sent: Sunday, February 16, 2003 11:21 PM
To: [EMAIL PROTECTED]
Subject: Need help formatting HDD
Hi All,
Hi . Saevio .
Sorry to write a F-BSD list with this, but i figured you
Hi, I need your help.
I am student-programmer from Ukraine.
In Internet I read, that it is possible to download FreeBSD 5.0
How can I do it??
In FTP needs login and pasword, (anonymous don`t work).
Thanks.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in
Whitewoolf wrote:
Hi, I need your help.
I am student-programmer from Ukraine.
In Internet I read, that it is possible to download FreeBSD 5.0
How can I do it??
In FTP needs login and pasword, (anonymous don`t work).
That is the correct method. If anonymous didn't work, then you either
are
John Bleichert wrote:
On Mon, 20 Jan 2003, aydun wrote:
Subject: Need help with Sound Card
Hi,
I've got a Rockwell WaveArtist card (RWA010, R6711-31) but I can't
configure FreeBSD 4.7 to see it correctly. Bios sees it ok at 0x220
it works under Windows (IRQ 5)
It's supposed to be ISA
Hi,
I've got a Rockwell WaveArtist card (RWA010, R6711-31) but I can't
configure FreeBSD 4.7 to see it correctly. Bios sees it ok at 0x220
it works under Windows (IRQ 5)
It's supposed to be ISA PnP and Sound Blaster Pro compatible.
I've tried various combinations of 'device pcm', 'device
On Mon, 20 Jan 2003, aydun wrote:
Subject: Need help with Sound Card
Hi,
I've got a Rockwell WaveArtist card (RWA010, R6711-31) but I can't
configure FreeBSD 4.7 to see it correctly. Bios sees it ok at 0x220
it works under Windows (IRQ 5)
It's supposed to be ISA PnP and Sound
hi all
so i have my gateway/ipfw/natd machine working, protecting a test client box. this
gateway box is an dell optiplex gx150 pIII 930 mhz with 128 mb of ram, 2 nics - one
integrated intel pro 1000, the other a really old 3com 3c905b that i pulled out of an
old junker computer that we were
Redmond Militante writes:
hi all
this gateway box is an dell optiplex gx150 pIII 930 mhz
with 128 mb of ram, 2 nics
i would like this gateway box to protect our webserver,
our mysql server, and possibly another webserver.
our webserver is a dual xeon dell poweredge 1650 with 2 gig of ram,
Redmond Militante wrote:
hi all
so i have my gateway/ipfw/natd machine working, protecting a test client box. this gateway box is
an dell optiplex gx150 pIII 930 mhz with 128 mb of ram, 2 nics - one integrated intel pro 1000,
the other a really old 3com 3c905b that i pulled out of an old
Hi all,
I am new to the FreeBSD community, I want to install
FreeBSD in my lab and I am getting problems installing
it.
I am trying to install Free-BSD on a Pentium-II
machine with 10 GB hard disk space.
I have downloaded the kern.flp and mfsroot.flp and
image copied them on to the floppies and
You can download the .iso image here:
ftp://ftp1.freebsd.org/pub/FreeBSD/ISO-IMAGES-i386/4.7/
then burn that image to a CD. It is for the i386 arch.
Jon
On Fri, 2002-12-27 at 12:56, venkat reddy wrote:
Hi all,
I am new to the FreeBSD community, I want to install
FreeBSD in my lab and I am
My question is If I want to load it from a CD. What
should I write on the CD from the ftp site. I am too
confused with the directories in the ftp site.
Download the ISO image.
ftp.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/4.7
You will need only first ISO image. You will need a cd
On Sat, 7 Dec 2002 13:35:26 -0600, Glenn Johnson wrote:
I am trying to set up a transparent squid proxy with ipfw. I am using
FreeBSD 4.7-STABLE (current as of today), version 2.5_1 of squid. I
have read the relevant information on the squid Web site and searched
the FreeBSD mail archive. I am
I am trying to set up a transparent squid proxy with ipfw. I am using
FreeBSD 4.7-STABLE (current as of today), version 2.5_1 of squid. I
have read the relevant information on the squid Web site and searched
the FreeBSD mail archive. I am pretty sure I have everything set up
right but it just
I am trying to set up a transparent squid proxy with ipfw. I am using
FreeBSD 4.7-STABLE (current as of today), version 2.5_1 of squid. I
have read the relevant information on the squid Web site and searched
the FreeBSD mail archive. I am pretty sure I have everything set up
right but it
On Sat, Dec 07, 2002 at 04:50:41PM -0600, Scott A. Moberly wrote:
I am trying to set up a transparent squid proxy with ipfw. I am
using FreeBSD 4.7-STABLE (current as of today), version 2.5_1 of
squid. I have read the relevant information on the squid Web site
and searched the FreeBSD
Of Grant Cooper
Sent: Friday, December 06, 2002 08:53
Cc: [EMAIL PROTECTED]
Subject: Re: Need help with newbie training on DNS/Bind
From one newbie to another, drop Bind and go with djbdns. I tried both
and
djbdns was 10* easyer to use and install. In two days I had DNS
resolution
working. Much
--- Didier Wiroth [EMAIL PROTECTED] wrote:
Hey,
I would really recommand:
DNS and BIND - 4th Edition (Covers Bind 9)
ISBN 0-596-00158-4
Covers bind and name resolution in every possbile
aspect! A really must
have book!
These own seems to be good (I personnaly don't have
it, but it
Anyone know of a good tutorial I could use to teach someone how to work
with Bind 9.2 on Freebsd as well as DNS? AKA adding and removing records,
administration, maintenance, troubleshooting, etc. I have a newbie who I
need to teach how to maintain one of our DNS servers and I'd like to do
It's not really a tutorial, but I learned how to configure BIND and do
basic administration using O'Reilly's DNS and BIND, 4th ed.. O'Reilly
has also recently published a Bind Cookbook (don't remember the exact
title), which has lots of examples of common BIND configurations.
Most of the general
]
To: Dragoncrest [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, December 05, 2002 11:28 PM
Subject: Re: Need help with newbie training on DNS/Bind
It's not really a tutorial, but I learned how to configure BIND and do
basic administration using O'Reilly's DNS and BIND, 4th ed.. O'Reilly
I recently put an old hard drive in my system to install freebsd 4.7 onto, never
having installed a bsd before
my previous setup was this -
/dev/hda 80 gig maxtor on primary on-board ide controller
/dev/hde 120 gig maxtor on promise tx1332 controller card (dont know why it got stuck
with hde)
Hi!
The server has 16 4.3GB SCSII disks, and it seems to have 4 RAID
controllers (when I look at the RAID configuration tool, but please
correct me if I'm wrong).
I haven't really seen a 520, but if these RAID controllers are IBM
ServeRAID then I have a bit of bad news to you. These don't
Wednesday, November 27, 2002, 7:47:53 PM, Toomas wrote:
TA Hi!
The server has 16 4.3GB SCSII disks, and it seems to have 4 RAID
controllers (when I look at the RAID configuration tool, but please
correct me if I'm wrong).
TA I haven't really seen a 520, but if these RAID controllers are IBM
hey..ummm i need sum help wif sumfink 4 a skool project..do u think u could
reply bak wif sumfink explaining how to re-make the driver for your
keyboard? if it would stuff the comp then how about making a new driver to
remake all the letters into the ascii symbols,if you want i could send you
I have just bought an old IBM PC Server 520 from a company that was
replacing it. If it's possible, I would like to get some information
on it (the company does not have any), and since the computer is only
for my own personal use, I can't afford to get official support, and
therefore I try
On a otherwise working 4.7 system, during the last stage of the boot process
just before the login prompt appears, I get several kbytes of messages I
am unable
to understand why and from where they are coming.
Would be most grateful if somebody could help me find the solution.
A snippet from
Per olof Ljungmark wrote:
On a otherwise working 4.7 system, during the last stage of the boot
process
just before the login prompt appears, I get several kbytes of messages
I am unable
to understand why and from where they are coming.
Would be most grateful if somebody could help me find the
Hi Jonathon,
On Wed, Oct 30, 2002 at 01:58:23AM +, Jonathon McKitrick wrote:
Here's what I have so far:
-
Program terminated with signal 11, Segmentation fault.^M
[snip]
#0 0x80b4545 in WMGetFromPLDictionary (plist=0x0, key=0x8137b50)^M
---Type return to
Hi all,
I'm trying to figure out how to get more debugging info out of my core dump.
Here's all I have so far:
local:~ gdb -c wmaker.core
GNU gdb 4.18 (FreeBSD)
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome
On Tue, Oct 29, 2002 at 12:06:44PM +, Jonathon McKitrick wrote:
Hi all,
I'm trying to figure out how to get more debugging info out of my core dump.
Here's all I have so far:
local:~ gdb -c wmaker.core
GNU gdb 4.18 (FreeBSD)
Copyright 1998 Free Software Foundation, Inc.
GDB is
Here's what I have so far:
-
Program terminated with signal 11, Segmentation fault.^M
Reading symbols from /usr/X11R6/lib/libwraster.so.4...done.^M
Reading symbols from /usr/local/lib/libtiff.so.4...done.^M
Reading symbols from /usr/X11R6/lib/libXpm.so.4...done.^M
moused_enable=YES
One thing to note is that you don't *need moused, even if you are
using X. moused just gives you a mouse when you are in a text console
(note, *not* a console in X, but rather a plain ol' console). So if
you always just boot into X, you don't need moused.
--
Jonathan Arnold
On Thu, 24 Oct 2002, leegold wrote:
Date: Thu, 24 Oct 2002 01:07:52 UT
From: leegold [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: X will not start as root - need help
Here's my config. files - appreciate the help:
Refer to my previous posts for the error message.
THANK YOU
On Wed, 23 Oct 2002, leegold wrote:
Date: Wed, 23 Oct 2002 01:34:44 UT
From: leegold [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: X will not start as root - need help
I tried to start X as root and got the output below.
I used xf86config script durrung Fbsd 4.7 to create my XF86Config
# [EMAIL PROTECTED] / 2002-10-23 08:13:47 -0400:
On Wed, 23 Oct 2002, leegold wrote:
Date: Wed, 23 Oct 2002 01:34:44 UT
From: leegold [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: X will not start as root - need help
I tried to start X as root and got the output below.
I used
Bryan Cassidy [EMAIL PROTECTED] writes:
Have you even wondered why no one has replied to your question? Have
you heard of su? Maybe you should think for a second about your
question. I just dont see the point nor do I understand the point in
loging into X as root. Sorry, I just don't get it.
will not start as root - need help from Gary W. Swearingen
I'm still banking on a misconfig. I would like the original poster to
submit his XF86Config and the output of:
$ grep moused /etc/rc.conf
... unless these items were already posted and I'm just unobservant and
didn't notice them.
- -Adam
Here's my config. files - appreciate the help:
Refer to my previous posts for the error message.
THANK YOU in advance.
1.
$ grep mouse /etc/rc.cont
moused_enable=YES
2.
$ dmesg
snip...
fd0: 1440-KB 3.5 drive on fdc0 drive 0
atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0
Bryan Cassidy [EMAIL PROTECTED] writes:
Have you even wondered why no one has replied to your question? Have
you heard of su? Maybe you should think for a second about your
question. I just dont see the point nor do I understand the point in
loging into X as root. Sorry, I just don't get it.
I tried to start X as root and got the output below.
I used xf86config script durrung Fbsd 4.7 to create my XF86Config file.
Can anyone help me wuth the fix?
Thanks
Output to screen when # startx:
(==) Log file: /var/log/XFree86.0.log, Time: Tue Oct 22 20:18:58 2002
(==) Using config file:
On Wed, 23 Oct 2002 01:34:44 UT
leegold [EMAIL PROTECTED] wrote:
I tried to start X as root and got the output below.
I used xf86config script durrung Fbsd 4.7 to create my XF86Config file.
Can anyone help me wuth the fix?
Thanks
why are you trying to startx as root? im a newbie and know
On Tue, 22 Oct 2002 08:53:25 -0500, Bryan Cassidy
[EMAIL PROTECTED] said:
On Wed, 23 Oct 2002 01:34:44 UT
leegold [EMAIL PROTECTED] wrote:
I tried to start X as root and got the output below.
I used xf86config script durrung Fbsd 4.7 to create my XF86Config file.
Can anyone help me wuth
On Wed, 23 Oct 2002 02:03:23 UT
leegold [EMAIL PROTECTED] wrote:
So people will know that this is not an X-wrapper problem.
Second Question: Why would you NEED to startx as root? I must be
very new or something cause I dont understand the point in starting X
as root.
601 - 700 of 729 matches
Mail list logo