I am newbie who just installed RawIO ('cd /usr/ports/benchmarks/rawio',
'make install') but am having trouble running the benchmark.
I run 'pkg_info -L rawio-1.2' to see that the program is installed in
/usr/local/bin/rawio. To run the program, I used:
'/usr/local/bin/rawio -a /dev/da0'
but the
Is there a way to install FreeBSD without a video card? Can I somehow
install the OS over ethernet without having a video card and monitor
hooked up?
Please email me at [EMAIL PROTECTED] if you can think of a way...
___
[EMAIL PROTECTED] mailing list
I'm having a problem installing FreeBSD on my Dell Dimension XPS120C w/
Adaptec 2400A Raid Controller (4x200GB Raid5). The second installation
disk almost finishes loading when the program gets stuck on:
"(da0:asr0:0:0:0): Synchronize cache failed, status == 0x1b, scsi status
== 0x0"
What cou
I've started having problems on my FreeBSD box; I've installed FreeBSD
on this system at least 5 times before without any problems.
This time, the installation took many attempts, and the following error
message occurs when I attempt to boot up:
/dev/da0s1a: BAD SUPER BLOCK: VALUES IN SUPER B
After installing FreeBSD I get the following message:
No /boot/loader
FreeBSD/i386 boot
Default: 0:da(0,a)/kernel
boot:
When installing the OS, I created one partition using the entire disk
(in this case a 560GB arrray) and created two mount points (256M 'swap'
as da0s1a and 559G '/' as da0s1b.
I've been installing and wiping FreeBSD installations a lot recently,
and I've noticed that the FTP servers aren't all that accomodating of
installation.
For example, only 1-in-4 or 1-in-5 installations from ftp.freebsd.org is
successful (these are all minimal installations done through FTP, no
After some initial trouble getting my FreeBSD box up and running, I'm
happy to report that I've been able to conduct a few empirical tests on
IDE hardware RAID array stripe size and performance. I decided to do
these benchmarks when I noticed a lack of this information on the web
and as part o
Trying to enlarge a partition (/usr) on a slice (da0s1) with plenty of
space:
# fdisk
The data for partition 1 is:
sysid 165 (0xa5), (FreeBSD/NetBSD/386BSD)
start 63, size 1171861362 (572197 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1
end: cyl 1023/ head 254/ sector 63
# d
he os using
the standard GUI.
-Rishi
Dan Nelson wrote:
In the last episode (Dec 04), Rishi Chopra said:
Trying to enlarge a partition (/usr) on a slice (da0s1) with plenty of
space:
# fdisk
The data for partition 1 is:
sysid 165 (0xa5), (FreeBSD/NetBSD/386BSD)
start 63, size 1171861362 (5
Problems have been resolved, thanks again for the help =)
-Rishi
Sergey 'DoubleF' Zaharchenko wrote:
On Thu, 04 Dec 2003 14:23:13 -0800
Rishi Chopra <[EMAIL PROTECTED]> probably wrote:
I get:
growfs: we are not growing (1048576 -> 0)
So I took a look at your email, and
Here's my setup:
ISP FreeBSD Gateway Win2k Box
>--rl0--rl1---<
ALL DHCP 192.168.0.1 192.168.0.2
rl0 is connected to the modem by ethernet and set
for DHCP, the ISP's method of address asignment.
rl1 is the second NIC in the BSD bo
This is gonna sound crazy, but: I got my FreeBSD box up and running and
decided to add a user account for myself (avoid the perils of working as
root?) I added a named account 'rchopra' and everything was honky-dorey.
The following series of events occured and have left me confused and
unable
What is the effect on the /usr partition when
reinstalling over an installation?
I suffered a kernel panic that wiped my MBR; I'd like
to simply reinstall with the same partition/slice
values - will my /usr partition and the data therein
still be accessible after reinstallation?
=
--- Dan Nelson <[EMAIL PROTECTED]> wrote:
> In the last episode (Jun 21), Rishi Chopra said:
> > What is the effect on the /usr partition when
> reinstalling over an
> > installation?
> >
> > I suffered a kernel panic that wiped my MBR; I'd
> like to
--- Sergey Zaharchenko <[EMAIL PROTECTED]> wrote:
> On Wed, Jun 23, 2004 at 09:43:54AM -0700,
> Rishi Chopra probably wrote:
>
> > What I've done is gotten another set of four
> drives
> > and reinstalled everything from scratch (using the
> > same pa
Are there any CA Bay Area FreeBSD consultants willing
to take a look at my malfunctioning home server (a
'bad dir ino' error)?
The list at
http://www.freebsd.org/commercial/consulting.html
wasn't too helpful =(
=====
Rishi Chopra
http://www.ocf.berkel
I'm getting an "Unable to find device node for
/dev/da0s1b in /dev" error that is causing
installation to abort. The disk is a 4x200GB IDE RAID
array. Any idea what the problem might be?
=====
Rishi Chopra
http://www.ocf.berkel
2400A ATA-100 RAID controller ( asr(4)
driver)" in the list; do I need to do anything
special, or will the driver load with the standard mfs
and kernel floppies?
=
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
__
D
the respective
> directory on the FTP
> server - I guess you'll find the file :-)
>
> Phil.
>
>
My understanding is that DRIVERS.TXT applies only to
the additional driver floppy, and that all supported
hardware is included with the installation floppies.
The BIOS
I'm attempting my first 'portsdb -Uu' after a successful CVSUp, but am
running into some problems:
idfubar# portsdb -Uu
Updating the ports index ... perl: not found
/usr/local/sbin/make_describe_pass2:70:in `write': Broken pipe
(Errno::EPIPE)
from /usr/local/sbin/make_describe_pass2:70:in
For some reason, I can't seem to update the index for the ports database:
idfubar# cd /usr/ports
idfubar# make index
Generating INDEX-5 - please wait..perl: not found
perl: not found
Done.
I also tried attempting my first 'portsdb -Uu' after a successful CVSUp,
but am running into some problems:
ase wait..
And then there's no additional output. Is the server working on the
request, or has the request hung?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rishi Chopra
Sent: Monday, January 05, 2004 5:23 PM
To: [EMAIL PROTECTED]
Subject: Updating P
While installing postgres I get the following:
You need to create the null device in your jailed Linux environment. Run
this
outside the jail, then press enter:
mkdir -m 0755 -p /dev
rm -f //compat/linux/dev/null
mknod //compat/linux/dev/null c 2 2
chmod 666 //compat/linux/dev/null
Do I HAVE to
Simply trying to install postgresql - the message I included is what the
system prints out when installing from the ports collection.
Andrew L. Gould wrote:
On Thursday 08 January 2004 06:13 pm, Rishi Chopra wrote:
While installing postgres I get the following:
You need to create the null
35PM -0800, Rishi Chopra wrote:
Simply trying to install postgresql - the message I included is what the
system prints out when installing from the ports collection.
Andrew L. Gould wrote:
Er, what directory were you in when you did the make install? The only
port that produces the messag
with feature changes in 7.3 and 7.4.
Best of luck,
Andrew Gould
On Thursday 08 January 2004 08:34 pm, Rishi Chopra wrote:
I was installing linux_base; it seems to be required, since I was
getting an error about libintl.so.4 - then again, I also updated gmake
via 'portupgrade -r gmake
I was able to get my network up and running with the suggestions below.
To review, my setup is the following:
ISP FreeBSD Gateway Win2k Box
>--rl0--rl1---<
ALL DHCP 192.168.0.1 192.168.0.2
rl0 is connected to the modem by ethern
I have a nitpicky question about logging into a FreeBSD machine and
SSH. I'm using a minimal FreeBSD install and SSH Secure Shell client
v3.2.0 - the crux of the problem is I am unable to "smoothly" login.
When I login to my machine, I'm prompted to enter an "authentication
response". A windo
RT in your kernel? Read the ipfw manpages to find
out how to forward ports.
Regards
Subhro
Subhro Sankha Kar
Indian Institute of Information Technology
Block AQ-13/1, Sector V
Salt Lake City
PIN 700091
India
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rishi Ch
Thanks for the generally good info; the 'me' keyword was the key piece
of info that I needed =)
Lowell Gilbert wrote:
Rishi Chopra <[EMAIL PROTECTED]> writes:
Perhaps someone can help me with this small part of rc.firewall:
[Ss][Ii][Mm][Pp][Ll][Ee])
pass
Any ideas what I should change?
-Rishi
Ruben de Groot wrote:
On Tue, Jan 13, 2004 at 11:55:50AM +, Matthew Seaman typed:
On Mon, Jan 12, 2004 at 01:32:30PM -0800, Rishi Chopra wrote:
I have a nitpicky question about logging into a FreeBSD machine and
SSH. I'm using a mi
my oif to 'rl0' (a nic in my system) and I set the oip to 'me',
what should the onet address be set to? Can I set the onet address to
'me' also? The oif has its address assigned by DHCP.
-R
Lowell Gilbert wrote:
Rishi Chopra <[EMAIL PROTECTED]> writes:
add deny all from 169.254.0.0/16 to any via ${oif}
${fwcmd} add deny all from 192.0.2.0/24 to any via ${oif}
${fwcmd} add deny all from 224.0.0.0/4 to any via ${oif}
${fwcmd} add deny all from 240.0.0.0/4 to any via ${oif}
--
Rishi Cho
world
${fwcmd} add pass udp from ${oip} to any 123 keep-state
# Pass VNC and DC++ connections to 192.168.0.2
# ${fwcmd} add pass tcp from $oip to 192.168.0.2 412 setup
# ${fwcmd} add pass tcp from $oip to 192.168.0.2 1412 setup
No, those are the values in the file. I had posted a previous question
to the list asking what the right values should be (my rl0 interface is
configured via DHCP) - any ideas what I should put in this section?
James Earl wrote:
On Mon, 2004-01-19 at 13:58, Rishi Chopra wrote:
Here'
ist under "SIMPLE." Instead of
letting DNS queries in from the outside, you want to let DNS queries in
from the "inside."
Let me know if you have any other questions, and I'll try to help.
James
On Mon, 2004-01-19 at 21:06, Rishi Chopra wrote:
If I want the gateway to for
write tests (60-70MB/sec), hence my dismay.
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
minal
with regards to detecting and installing devices)?
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Thank you
Chris Pressey wrote:
On Fri, 23 Jan 2004 21:54:37 -0800
Rishi Chopra <[EMAIL PROTECTED]> wrote:
I'm running a FreeBSD machine with no head (e.g. no monitor installed to
the machine).
Is there a way to view the statup messages from the system once the
machine is up and
wrote:
On Jan 24, 2004, at 12:51 AM, Rishi Chopra wrote:
I was rather disappointed with the results. Can anyone suggest what
might be causing such slow disk speeds, or whether these speeds are
out of the ordinary for a 4-disk FreeBSD RAID5 installation? I have
done nothing to configure the
Is there any difference between 'make install' and 'make install clean'?
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscri
Is there any way to run a 'clean' command to remove 'WORK' directories
from the ports tree after the fact?
Chris wrote:
On Friday 30 January 2004 11:26 pm, Chris wrote:
On Friday 30 January 2004 11:21 pm, Rishi Chopra wrote:
Is there any difference between 'make i
My understanding is that 'make deinstall' only removes the port from the
"ports database" - is there any way to actually remove all of the
files associated with a particular port?
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
__
t) or do I need to intervene? If intervention
is required, how would I go about setting things right?
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To u
Thank you!
Ion-Mihai Tetcu wrote:
On Mon, 02 Feb 2004 19:49:50 -0800
Rishi Chopra <[EMAIL PROTECTED]> wrote:
I'm getting the following error message during startup:
/usr: mount pending error: blocks 16 files 1
I'm guessing this orrcured due to a shutdown during backgro
ing to fix the filesystem? Have I suffered a
total loss or is fsck still doing its thing?
If this is a total loss, can I do anything to get my data back?
-Rishi
Rishi Chopra wrote:
I'm getting the following error message during startup:
/usr: mount pending error: blocks 16 files 1
I&
x27; on a 500GB partition take? It's been
running for almost 12 hours now, and the latest output is still "Phase 1
- check blocks and sizes"; is something wrong or is fsck still doing its
thing?
Ion-Mihai Tetcu wrote:
On Tue, 03 Feb 2004 01:09:22 -0800
Rishi Chopra <[EMAIL
a simple fsck of the filesystem not work in my case?
Thanks,
Rishi
Ion-Mihai Tetcu wrote:
On Tue, 03 Feb 2004 01:09:22 -0800
Rishi Chopra <[EMAIL PROTECTED]> wrote:
I booted into single-user mode and ran 'fsck' - the latest output to the
terminal says:
FILE SYSTEM MARKED
Please see my reply below:
Ion-Mihai Tetcu wrote:
On Sun, 08 Feb 2004 21:12:51 -0800
Rishi Chopra <[EMAIL PROTECTED]> wrote:
Here's a summary of my problem so far:
Server was idle (e.g. absolutely no processes running aside from
csh, ttyv0 and ps) when power was cut; server report
m a recent thyroid removal and a 12-hour neck
dissection/removal is a full-time affair, and the 30 some-odd staples in
my neck greatly limit my ability to sit at the computer.
Looks like the important thing is for me to make a new friend in the
FreeBSD community and a new start on computi
Is it possible to boot the FreeBSD FIXIT CD from a non-bootable CDROM
drive, by using a FreeBSD boot disk or something similar?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail t
I've had a tough time getting help for this question on the newsgroups and
freebsd.org discussion forums, so I thought I'd mail the list...
I'm setting up a 600GB Raid-5 array (4-200GB 8MB Buffer IDE disks connected
to an Adaptec 2400A controller) and would like some help picking a
stripe-size (th
Chuck McManis wrote:
At 02:04 AM 3/6/2004, Rishi Chopra wrote:
What if the drive is recognized by the BIOS?
Then you know its cabled correctly. It can still be misjumpered or bad.
FBSD doesn't use the bios functions to talk to the drive.
--Chuck
Drive was cabled as master, jumper
Chuck McManis wrote:
At 02:04 AM 3/6/2004, Rishi Chopra wrote:
What if the drive is recognized by the BIOS?
Then you know its cabled correctly. It can still be misjumpered or bad.
FBSD doesn't use the bios functions to talk to the drive.
--Chuck
Drive was cabled as master, jumper
I'd like apcupsd to call 'shutdown -p' when halting the system.
Currently the daemon works OK but allows for a race condition (e.g.
battery is not dead but power is restored, leaving the system waiting
for a key to be pressed)...
Anyone have any ideas on how to accomplish
Rishi Chopra wrote:
I'd like apcupsd to call 'shutdown -p' when halting the system.
Currently the daemon works OK but allows for a race condition (e.g.
battery is not dead but power is restored, leaving the system waiting
for a key to be pressed)...
Anyone have any ideas on ho
is still intact?
--
._ .
|\_|/__/|
.--. / / \/ \ \
| Rishi Chopra |/__| oo |__ \
| http://www.ocf.berkel
claim the array?
--
._ .
|\_|/__/|
.--. / / \/ \ \
| Rishi Chopra |/__| oo |__ \
| http://www.ocf.berkel
the array?
--
._ .
|\_|/__/|
.--. / / \/ \ \
| Rishi Chopra |/__| oo |__ \
| http://www.ocf.berkeley.ed
sion of FreeBSD?
--
._ .
|\_|/__/|
.--. / / \/ \ \
| Rishi Chopra |/__| oo |__ \
| http://www.ocf.berkel
to it isn't? What
should I do so that the drive is recognized?
=
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
___
--- Josh Paetzel <[EMAIL PROTECTED]> wrote:
> On Thursday 09 September 2004 16:58, Rishi Chopra
> wrote:
> > I just installed FreeBSD 5.2 on an old Dell
> (Pentium
> > 120). The box has an ide controller onboard as
> well
> > as a Promise Ultra100 TX2 PCI con
roblem might be? If the
drive loads in BIOS, DOS, and Win2k, why wouldn't the
drive be recognized by FreeBSD?
=
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection aro
s either controller
failure or cable failure. In my case I'm certain that
neither is the cause of the problem.
Any ideas?
=
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
___
Do you Yahoo!?
Declare Yourself - Register online t
Can anyone help with this please?
--- Rishi Chopra <[EMAIL PROTECTED]> wrote:
> Date: Sun, 19 Sep 2004 23:29:01 -0700 (PDT)
> From: Rishi Chopra <[EMAIL PROTECTED]>
> Subject: ATA - UDMA ICRC Error
> To: [EMAIL PROTECTED]
> CC: [EMAIL PROTECTED]
>
> I
6064684847% 0
0 100% /fat32/video
[13:29:[EMAIL PROTECTED]:/]$
How can I be out of inodes for my 800MB /usr
partition? I didn't modify anything from the standard
minimal installation and only installed the ports
tree, CVSUP, and /src/sys afterwards.
===
I apologize for text wrapping
of some email clients.
=
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
__
m
gracefully without requiring the user (me) to press a
key afterwards.
=
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
__
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotion
offered to help. I suppose
you can draw your own conclusions about the community-like nature of
FreeBSD use in the Bay Area (home to UC Berkeley, FreeBSD Mall, and
birthplace of the FreeBSD movement.)
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
Rishi Chopra wrote:
I do not have the FIX-IT
When I try to mount a CD, I get the following errror:
usha# mount /cdrom
cd9660: /dev/acd0: No such file or directory
Any idea what the problem might be?
--
Rishi Chopra =)
http://www.ocf.berkeley.edu/~rchopra
___
[EMAIL PROTECTED] mailing list
http
Rob,
The 'c' definitely was missing. Unfortunately, so is /dev/acd0c - what
should I do now?
Rob wrote:
Rishi Chopra wrote:
When I try to mount a CD, I get the following errror:
usha# mount /cdrom
cd9660: /dev/acd0: No such file or directory
Any idea what the problem might be?
Here's what happens:
usha# mount_cd9660 /dev/acd0 /mnt
mount_cd9660: /dev/acd0: No such file or directory
Kevin D. Kinsey, DaleCo, S.P. wrote:
Rishi Chopra wrote:
Rob,
The 'c' definitely was missing. Unfortunately, so is /dev/acd0c - what
should I do now?
Hi, Rishi...have
Kernel config file shows the following:
options CD9660 #ISO 9660 Filesystem
device atapicd # ATAPI CDROM drives
device cd # CD
Peter Risdon wrote:
Rishi Chopra wrote:
Here's what happens:
usha# mount_cd9660 /dev/acd0 /
The drive is IDE, but it doesn't seem to show up. Any idea what the
problem might be?
Ion-Mihai Tetcu wrote:
On Tue, 02 Mar 2004 11:46:56 -0800
Rishi Chopra <[EMAIL PROTECTED]> wrote:
Here's the dmesg (Kernel config also included below):
Copyright (c) 1992-2003 The FreeBSD Pr
from being
disconnected in the future?
Unfortunately the file transfer client portion of SSH Secure Shell is
very poor at resuming queued work, so this is starting to cause me an
inconvinience.
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
___
[EMAIL
cd # CD
/etc/fstab:
/dev/acd0 /cdrom cd9660 ro,noauto 0 0
/dev/acd0c is also absent.
How do I mount the CDROM? Also, I'm unable to boot from CDROM despite
their being a BIOS option to do so. Any ideas what the problem is?
--
Rishi Chopra
http://www.oc
ngbeards please? Arrrrrrgh!
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
Wayne Sierke wrote:
On Sat, 2004-03-06 at 16:45, Rishi Chopra wrote:
I have two machines in my loft (a FreeBSD server and a Win2k box)
connected via CAT5 crossover cable.
I connect to the FreeBSD machine v
ive is mis-jumpered
drive is mis-cabled
drive is dead
HTH
--Chuck
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
te is that the server has been
up for weeks now, and even though a particular SSH session is dropped,
the server is still up and running, and will accept new SSH connections
after unexpecteded termination of previous connections. This leads me
to believe that this is *not* and ACPI problem.
--
Ri
...
Wayne Sierke wrote:
On Sun, 2004-03-07 at 08:17, Rishi Chopra wrote:
Wayne,
I left an SSH connection open to my server last night, and it was still
connected this morning; the amount of time exceeded that of past
sessions when I was unexpectedly disconnected.
I understand your reasoning
tandard with FreeBSD 5.1-RELEASE.
--
Rishi Chopra
http://www.ocf.berkeley.edu/~rchopra
Matthew Seaman wrote:
On Tue, Jan 13, 2004 at 01:30:15PM -0800, Rishi Chopra wrote:
I've included copies of my /etc/ssh/ssh_config file and /etc/pam.d/ssh -
I'm running a default minimal installat
81 matches
Mail list logo
