On 10/18/2013 11:00 AM, Alan DeKok wrote:
Bertalan Voros wrote:
I have one question, I would like to log a message in radius.log when a
device is rejected based on its mac address.
I would like to put a message saying that the device was unauthorised
and the Calling-Station-Id into the
Hi,
Ah... a fix wasn't pulled over from v3.0.x to master. I've just done
that now.
server now starts with such switch/case config present. cheers!
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
...@lboro.ac.uk
Sent: 14 October 2013 07:27
To: FreeRadius users mailing list
Subject: Re: Case statement error
Hi,
Ah... a fix wasn't pulled over from v3.0.x to master. I've just
done that now.
server now starts with such switch/case config present. cheers!
alan
-
List info/subscribe/unsubscribe
On Fri, Oct 11, 2013 at 05:41:07PM +0100, Fabrizio Vecchi wrote:
As you can see, the device wasn't listed in the file, the authentication
went fine, saying that the tunnel that I should get has ID 40, but that
wasn't overwritten by the authorized_macs check...
Add
DEFAULT Auth-Type := Reject
On Mon, Oct 14, 2013 at 10:40:19AM +0100, Matthew Newton wrote:
On Fri, Oct 11, 2013 at 05:41:07PM +0100, Fabrizio Vecchi wrote:
As you can see, the device wasn't listed in the file, the authentication
went fine, saying that the tunnel that I should get has ID 40, but that
wasn't
Hi,
Does FreeRADIUS give a fig about what the username is? If it were all
numeric, say 123456789 I guess it is happy with that? It's just a string
to FreeRADIUS?
FreeRADIUS is just a RADIUS serverand hence any decisions made by it are
all down to defined policies. so if you have
Franks Andy (RLZ) IT Systems Engineer wrote:
Hi again,
Sorry to bang on about this, but I'm struggling still.
Brand new machine, Ubuntu 13.04 server, never had freeradius installed
on it. Pulled from git, - (FreeRADIUS Version 3.1.0 (git #209982d),
I didn't see the 3.1.0... At this
On 10/10/13 15:03, a.l.m.bu...@lboro.ac.uk wrote:
Samba 4 is lurvely... apparently 100% compatible with existing AD
installations, although, as always, it's a bit finicky and info is a bit thin on
the ground (and I've not written up a guide when I set my test environment up that
uses an S4
On 14 Oct 2013, at 15:52, Volker Lieder v.lie...@uvensys.de wrote:
Hi list,
we use freeradius for our dsl user authentication.
We want to disconnect some users via radius at fixed times, e.g. 04:00 am.
Which attribute and value should / can i use?
Session-Timeout doesnt do the job.
On 14/10/13 16:01, Jonathan Gazeley wrote:
On 10/10/13 15:03, a.l.m.bu...@lboro.ac.uk wrote:
Samba 4 is lurvely... apparently 100% compatible with existing AD
installations, although, as always, it's a bit finicky and info is a
bit thin on the ground (and I've not written up a guide when I set
Hi,
we tried to calculate it via expr.
How would you calculate it?
Regards,
Volker
Am 14.10.2013 um 17:03 schrieb Arran Cudbard-Bell:
On 14 Oct 2013, at 15:52, Volker Lieder v.lie...@uvensys.de wrote:
Hi list,
we use freeradius for our dsl user authentication.
We want to
On 14 Oct 2013, at 16:27, Volker Lieder v.lie...@uvensys.de wrote:
Hi,
we tried to calculate it via expr.
How would you calculate it?
Pretty sure the expiration module does exactly this.
Arran Cudbard-Bell a.cudba...@freeradius.org
FreeRADIUS Development Team
-
List
On 14/10/13 16:18, Phil Mayers wrote:
i.e. the noop from the files module is ignored. This is a change from
2.x where the most recent module return code can be checked.
Have I missed the change, or is this not intentional?
Looks like this happened in the modcall.c rewrite (d0aa96709cea)
On 14/10/13 17:15, Phil Mayers wrote:
On 14/10/13 16:18, Phil Mayers wrote:
i.e. the noop from the files module is ignored. This is a change from
2.x where the most recent module return code can be checked.
Have I missed the change, or is this not intentional?
Looks like this happened in
Angelica Delgado wrote:
We have our freeradius setup to authenticate with Active Directory for
EAP. Currently, it uses the samaccountname but we want to use UPN
instead. We get NT_STATUS_NO_SUCH_USER when testing with ntlm through
command line.
ntlm_auth --request-nt-key
You might want to do an LDAP lookup first on your UPN to find the
samAccountName, then use that with ntlm_auth.
Stefan
From: freeradius-users-bounces+stefan.paetow=diamond.ac...@lists.freeradius.org
[mailto:freeradius-users-bounces+stefan.paetow=diamond.ac...@lists.freeradius.org]
On Behalf
users mailing list
Subject: Re: Case statement error
Franks Andy (RLZ) IT Systems Engineer wrote:
I still get
# Loading authorize {...}
/usr/local/etc/raddb/sites-enabled/default[222]: case statements may
only appear within a switch section
You need to upgrade your binary. You're not using
Hi,
this error is also present with 3.1.0 when using the provided
orginate-coa virtual-server - so its reproducable with a minimally
adjusted configuration (just drop originate-coa from sites-available
to sites-enabled)
alan
-
List info/subscribe/unsubscribe? See
a.l.m.bu...@lboro.ac.uk wrote:
this error is also present with 3.1.0 when using the provided
orginate-coa virtual-server - so its reproducable with a minimally
adjusted configuration (just drop originate-coa from sites-available
to sites-enabled)
Ah... a fix wasn't pulled over from v3.0.x
Fabrizio Vecchi wrote:
First of all, sorry if my email is very long, I am just trying not to
leave any important details out. :)
That's good.
So far, I managed to do the dynamic VLAN assignment, but cannot seem to
get it to work together with the MAC checking.
They key thing to remember
On 12 Oct 2013, at 17:40, Andrei Petru Mura mapand...@gmail.com wrote:
Hello,
I imported FreeRADIUS from git on Eclipse, and tried to build it, but this
error occurs while building the project:
threads.h:47:2: error: #error WITH_THREADS defined, but pthreads not available
Can anybody
Hi Alan and thanks for the reply.
On 12 October 2013 13:42, Alan DeKok al...@deployingradius.com wrote:
So far, I managed to do the dynamic VLAN assignment, but cannot seem to
get it to work together with the MAC checking.
Get them working independently. Then, put the pieces together.
Fabrizio Vecchi wrote:
I guess at the end of the day my question boils down to the following:
where should I put the MAC check, so that the user gets assigned to the
right VLAN?
In post-auth.
If I put it in the authorize part of sites-enabled/default, the VLAN
update request will get
hi,
you must ensure you 'sign out' of the AD before you clone as otherwise
both objects are the same...and, as you have found, doing something
with the cloen breaks the first server. or just dont bind to the AD before
cloning.
to fix, you need to ensure that both machines have their own
Did you also change the MAC address for the network adapter in the VMWare
settings? Otherwise VMWare believes (and possibly your network too) the two
machines are the same.
After changing the MAC address, reconfigure your network settings on the clone
and reboot. Delete the trust (computer)
October 2013 15:26
To: FreeRadius users mailing list
Subject: Re: Case statement error
Franks Andy (RLZ) IT Systems Engineer wrote:
Trying version #d166290 results in
Which is old. The bug has already been fixed.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org
Gilbert T. Gutierrez, Jr. wrote:
I have a Free Radius Server (2.1.10-5 packaged with CentOS 6) that is
configured to handle radius authentication eaps ttls in a tunnel
(Motorola/Cambium Canopy Product). I want to be able to authenticate
plain text requests from other devices that do not
So what you're saying is that even though the users are using anonymous outerid
and want anonymity you want to release their id to the site they are at?
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.-
List info/subscribe/unsubscribe? See
Hi,
I'e installed oracle instant client from rpm packages (basic + devel)
okay. if you've done this rather than manually installing from Oracle then
its most likely that the paths are different...you will need to check where
your Oracle files have been installed and use those paths instead
On Thu, Oct 10, 2013 at 2:22 PM, Puzzel puzzel1...@gmail.com wrote:
--with-oracle-include-dir=/usr/lib/oracle/11.2/client64
** **
configure: WARNING: oracle headers not found. Use
--with-oracle-include-dir=path.configure: WARNING: silently not
building rlm_sql_oracle.
-bounces+puzzel1982=gmail@lists.freeradius.org]
On Behalf Of a.l.m.bu...@lboro.ac.uk
Sent: Thursday, October 10, 2013 9:41 AM
To: FreeRadius users mailing list
Subject: Re: freeradius 2.2.0 on Fedora and oracle module
Hi,
I'e installed oracle instant client from rpm packages (basic +
devel
On 10 Oct 2013, at 09:22, Puzzel puzzel1...@gmail.com wrote:
Yes, you are right, the oracle inlcude path was in the different location
(/usr/include/oracle/11.2/client64 not /usr/lib...).
Now i've got another problem.
./configure --with-oracle-lib-dir=/usr/lib/oracle/11.2/client64/lib
@lists.freeradius.org]
On Behalf Of Arran Cudbard-Bell
Sent: Thursday, October 10, 2013 11:04 AM
To: FreeRadius users mailing list
Subject: Re: freeradius 2.2.0 on Fedora and oracle module
On 10 Oct 2013, at 09:22, Puzzel puzzel1...@gmail.com wrote:
Yes, you are right, the oracle inlcude
o.k deinstalled the package and package manager I was using, installed
homebrew, installed latest openssl and talloc and ….. just compiled and
installed. Simples!
Thanks for that
A
On 9 Oct 2013, at 11:54, Arran Cudbard-Bell a.cudba...@freeradius.org wrote:
On 9 Oct 2013, at 11:21, Alex
On 10 Oct 2013, at 10:31, Puzzel puzzel1...@gmail.com wrote:
Tnx Arran,
./configure went fine and then created all.mk file.
What to do next? make don't work. I'm sorry i'm not very much experienced
in linux.
You need to do make in the top level directory not in the module directory.
On 10 Oct 2013, at 10:44, Alex Sharaz alex.sha...@york.ac.uk wrote:
o.k deinstalled the package and package manager I was using, installed
homebrew, installed latest openssl and talloc and ….. just compiled and
installed. Simples!
Hmm wonder what rudix was doing to mess up talloc
On 10 Oct 2013, at 12:02, Arran Cudbard-Bell a.cudba...@freeradius.org wrote:
On 10 Oct 2013, at 10:44, Alex Sharaz alex.sha...@york.ac.uk wrote:
o.k deinstalled the package and package manager I was using, installed
homebrew, installed latest openssl and talloc and ….. just compiled and
: Thursday, October 10, 2013 12:50 PM
To: FreeRadius users mailing list
Subject: Re: freeradius 2.2.0 on Fedora and oracle module
On 10 Oct 2013, at 10:31, Puzzel puzzel1...@gmail.com wrote:
Tnx Arran,
./configure went fine and then created all.mk file.
What to do next? make don't work
Hi,
Thu Oct 10 11:52:16 2013 : Info: WARNING: Module rlm_eap became
unblocked for request 47516341
...since the return of our students this year.
I am 99% sure this is ntlm_auth being slow, and I have a strong
suspicion this is related to some changes in our AD infrastructure
over the
+puzzel1982=gmail@lists.freeradius.org
[mailto:freeradius-users-bounces+puzzel1982=gmail@lists.freeradius.org]
On Behalf Of Arran Cudbard-Bell
Sent: Thursday, October 10, 2013 1:51 PM
To: FreeRadius users mailing list
Subject: Re: freeradius 2.2.0 on Fedora and oracle module
On 10 Oct 2013, at 12:34
Phil Mayers wrote:
In order to prove this to the AD team, I need to gather some timing
stats for ntlm_auth; can anyone think of an easy way to do this within
FreeRADIUS?
I had patches for this a while ago. But they won't apply to the
current code.
The idea was to update the modsingle
On 10/10/13 12:56, a.l.m.bu...@lboro.ac.uk wrote:
Hi,
Thu Oct 10 11:52:16 2013 : Info: WARNING: Module rlm_eap became
unblocked for request 47516341
...since the return of our students this year.
I am 99% sure this is ntlm_auth being slow, and I have a strong
suspicion this is related to
On 10 Oct 2013, at 13:39, Puzzel puzzel1...@gmail.com wrote:
I've made configure at top level ./configure
--with-oracle-lib-dir=/usr/lib/oracle/11.2/client64/lib
--with-oracle-include-dir=/usr/include/oracle/11.2/client64
Then i made make, but i still can't find rlm_sql_oracle.so file. :/
Puzzel wrote:
I've made configure at top level ./configure
--with-oracle-lib-dir=/usr/lib/oracle/11.2/client64/lib
--with-oracle-include-dir=/usr/include/oracle/11.2/client64
If the build is having issues, you should READ the output of
configure. It tells you what it's building, and what
On 10/10/2013 08:39 AM, Puzzel wrote:
I've made configure at top level ./configure
--with-oracle-lib-dir=/usr/lib/oracle/11.2/client64/lib
--with-oracle-include-dir=/usr/include/oracle/11.2/client64
Then i made make, but i still can't find rlm_sql_oracle.so file. :/
Try reading the output
authentications (as microsoft call it) - but I'm also looking at
samba4 - as it has a new option that will balance ntlm_auth against all
known boxes rather than the first box it latches onto - to spread the
load.
Samba 4 is lurvely... apparently 100% compatible with existing AD
Hi,
Any chance you can point me in the direction of these?
heres one:
http://support.microsoft.com/kb/2688798
Semi-related, but to my annoyance we're seeing rather less SSL
resumption than I would expect, given that iOS and Android both do
it by default.
Cisco wireless problem?
theres
Hi,
Samba 4 is lurvely... apparently 100% compatible with existing AD
installations, although, as always, it's a bit finicky and info is a bit thin
on the ground (and I've not written up a guide when I set my test environment
up that uses an S4 server for EAP-MSCHAPv2). But at least it
it can also BE an AD master etc. anyway, you dont know how tempting it
was to yum install samba4 on our production system ;-)
Indeed. That's exactly what I'm using it for. :-)
I'd certainly like to see some samba3.x versus samba4 benchmarks in
this sort of context
Yes, versus Windows 2008
On 09/10/13 19:09, Alan DeKok wrote:
That is *exactly* what the server does for TCP.
...in which case my comment is entirely redundant, please disregard!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Phil wrote:
I could wrap ntlm_auth in a script that times it and lots the info, but
I'm slightly wary of that - it might perturb the timings.
Any obvious/easy thing I'm missing?
You might be able to run FR under gdb (or attach/resume a running FR),
and set breakpoints with commands that
On 10/10/13 17:16, Brian Julin wrote:
You might be able to run FR under gdb (or attach/resume a running FR),
and set breakpoints with commands that resume after running the GDB
commands.
That's in inventive one, but I'm not *that* desperate yet!
-
List info/subscribe/unsubscribe? See
On 10/10/13 18:32, Phil Mayers wrote:
I've just ported our config to 3.0 and I'm seeing a few error messages;
they don't seem to be critical but are concerning me.
Specifically I'm seeing:
We're also getting:
Info: Invalid operator for item Sql-Group: reverting to '=='
...which is logged to
On 10 Oct 2013, at 18:32, Phil Mayers p.may...@imperial.ac.uk wrote:
I've just ported our config to 3.0 and I'm seeing a few error messages; they
don't seem to be critical but are concerning me.
Specifically I'm seeing:
ERROR: Conditional evaluation failed due to internal sanity
On 10/10/13 18:51, Arran Cudbard-Bell wrote:
possibly if (outer.request
Hmm, no same thing, and worse it's squashing Module-Failure-Message :o(
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Phil Mayers wrote:
I've just ported our config to 3.0 and I'm seeing a few error messages;
they don't seem to be critical but are concerning me.
Specifically I'm seeing:
ERROR: Conditional evaluation failed due to internal sanity check.
That should be fixed. Either it can be deleted,
On 10/10/13 15:01, a.l.m.bu...@lboro.ac.uk wrote:
Hi,
Any chance you can point me in the direction of these?
heres one:
http://support.microsoft.com/kb/2688798
Semi-related, but to my annoyance we're seeing rather less SSL
resumption than I would expect, given that iOS and Android both do
On 10 Oct 2013, at 22:23, Alan DeKok al...@deployingradius.com wrote:
Phil Mayers wrote:
I've just ported our config to 3.0 and I'm seeing a few error messages;
they don't seem to be critical but are concerning me.
Specifically I'm seeing:
ERROR: Conditional evaluation failed due to
On 9 Oct 2013, at 07:05, Hachmer, Tobias tobias.hach...@stadt-frankfurt.de
wrote:
Hello list,
I want to delete one reply attribute from the reply list if the
access-request is originating not from a special NAS-IP-Address.
Currently I have solved this by adding this unlang code in
Dear Aran C. Bell
Thanks for everything, Here is update.
1.)
All-In-MB counter works. Please note, when a user has downloaded his
quota, counter
do not force log off . Saying other way, if the user is online, he would
remain online until he log off him self or stop browsing. But point to be
On Wed, Oct 9, 2013 at 3:41 PM, Alex Sharaz alex.sha...@york.ac.uk wrote:
While we have 900 switches doing mac and 802.1x based auth, we can have
6000+ users on our wireless network all authenticating to RADIUS via 3 RAS
clients. Looking at the back end server log files, it does look as if, in
Am Mittwoch, 9. Oktober 2013, 09:41:19 schrieb Alex Sharaz:
Hi,
Is anyone out there load balancing RADIUS with an F5 load balancer? We're
doing it here, but I can't help thinking that the actual load balancing
algorithm need some tweaking.
As far as I'm aware ( systems section support the
Hi,
Just got a wee bit of trouble linking in the talloc libraries, but I'm sure
its not insurmountable
Alan uses OSX so I'm *SURE* it compiles fine with the right support stuff
present - you
should have been compiling it before the official release ;-)
alan
-
List
On 09.10.2013 10:41, Alex Sharaz wrote:
Hi,
Is anyone out there load balancing RADIUS with an F5 load balancer? We're
doing it here, but I can't help thinking that the actual load balancing
algorithm need some tweaking.
I have f5 loadbalancers but atm I don't use them for our RADIUS
On 9 Oct 2013, at 10:16, Fajar A. Nugraha l...@fajar.net wrote:
On Wed, Oct 9, 2013 at 3:41 PM, Alex Sharaz alex.sha...@york.ac.uk wrote:
While we have 900 switches doing mac and 802.1x based auth, we can have 6000+
users on our wireless network all authenticating to RADIUS via 3 RAS
On 09.10.2013 11:25, Olivier Beytrison wrote:
On 09.10.2013 10:41, Alex Sharaz wrote:
I was wondering if there's a way off having a bit more granularity in terms
of how the f5 load balances incoming RADIUS requests.
Another nice thing to do is to do persistence based on radius AVP
...@lists.freeradius.org]
De la part de Michael Schwartzkopff
Envoyé : mercredi 9 octobre 2013 11:17
À : FreeRadius users mailing list
Objet : Re: load balancing radius with F5 devices
Am Mittwoch, 9. Oktober 2013, 09:41:19 schrieb Alex Sharaz:
Hi,
Is anyone out there load balancing RADIUS with an F5 load balancer
you don't know how hard it was to wait till the official release :-)
A
On 9 Oct 2013, at 10:19, a.l.m.bu...@lboro.ac.uk wrote:
Hi,
Just got a wee bit of trouble linking in the talloc libraries, but I'm sure
its not insurmountable
Alan uses OSX so I'm *SURE* it compiles fine with the
Many thanks for this Olivier, much appreciated
Rgds
A
On 9 Oct 2013, at 11:07, Olivier Beytrison oliv...@heliosnet.org wrote:
On 09.10.2013 11:25, Olivier Beytrison wrote:
On 09.10.2013 10:41, Alex Sharaz wrote:
I was wondering if there's a way off having a bit more granularity in terms
of
On 9 Oct 2013, at 10:19, a.l.m.bu...@lboro.ac.uk wrote:
Hi,
Just got a wee bit of trouble linking in the talloc libraries, but I'm sure
its not insurmountable
Alan uses OSX so I'm *SURE* it compiles fine with the right support stuff
present - you
should have been compiling it
On 9 Oct 2013, at 11:21, Alex Sharaz alex.sha...@york.ac.uk wrote:
you don't know how hard it was to wait till the official release :-)
A
brew install talloc
brew link talloc
./configure
make
make install
?
Arran Cudbard-Bell a.cudba...@freeradius.org
FreeRADIUS Development Team
-
List
On 10/08/2013 07:09 PM, Arran Cudbard-Bell wrote:
On 8 Oct 2013, at 17:44, Phil Mayers p.may...@imperial.ac.uk wrote:
On 08/10/13 17:01, Rok Kosir wrote:
authentication to mysql), when i run freeradius -X, i get Segmentation
Fault when it reaches dhcp listner.
See doc/bugs.
and skip to
Volker Lieder wrote:
Within the old version, we used a database config for groups with an
attribute Session-Timeout and the value `%{expr:06:00}`
Which never worked. 06:00 isn't a number. You can't just invent
syntax and use i.
With new version freeradius send an error while looking in
Russell Mike wrote:
All-In-MB counter works. Please note, when a user has downloaded his
quota, counter do not force log off .
The counter modules DOES NOT DO THAT.
To see why, ask yourself what does FreeRADIUS see when the user has
downloaded his quota?
The answer is nothing. The
On 9 Oct 2013, at 11:56, Rok Kosir rok.ko...@cosylab.com wrote:
On 10/08/2013 07:09 PM, Arran Cudbard-Bell wrote:
On 8 Oct 2013, at 17:44, Phil Mayers p.may...@imperial.ac.uk
wrote:
On 08/10/13 17:01, Rok Kosir wrote:
authentication to mysql), when i run freeradius -X, i get
Franks Andy (RLZ) IT Systems Engineer wrote:
Trying version #d166290 results in
Which is old. The bug has already been fixed.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Thanks Alan. D
So if you want to do something when the users traffic is over the quota,
you have to do it in the accounting section.
Could you please kindly indicate what should i do there ? i tried to
perform the check again when user is online by adding counter entry in *
session* section. but
Adam Bishop wrote:
It appears the debugging switches don't work quite as I'd expect in
FreeRADIUS 3 when RadSec is configured.
Yes. Because of OpenSSL limitations, the server MUST have multiple
threads when using radsec.
# radiusd -fxx -l stdout
Works as expected (threaded debugging
Hi,
It appears the debugging switches don't work quite as I'd expect in
FreeRADIUS 3 when RadSec is configured.
# radiusd -fxx -l stdout
yep. if you try 'radiusd -X' it will tell you to run it like that.
# radiusd -fXx -l stdout
# ./sbin/radiusd -Cfxx -l stdout
single thread
On 9 Oct 2013, at 15:22, Adam Bishop adam.bis...@ja.net wrote:
It appears the debugging switches don't work quite as I'd expect in
FreeRADIUS 3 when RadSec is configured.
# radiusd -fxx -l stdout
Works as expected (threaded debugging with no timestamps), however:
# radiusd -fXx -l
Russell Mike wrote:
So if you want to do something when the users traffic is over the quota,
you have to do it in the accounting section.
Could you please kindly indicate what should i do there ? i tried to
perform the check again when user is online by adding counter entry in
*session*
o.k. different method of getting talloc onto machine :-)
I used
curl -s https://raw.github.com/rudix-mac/package-manager/master/rudix.py | sudo
python - install rudix
then
rudix install talloc
:-))
On 9 Oct 2013, at 11:54, Arran Cudbard-Bell a.cudba...@freeradius.org wrote:
On 9 Oct
On 9 Oct 2013, at 15:47, Alan DeKok al...@deployingradius.com wrote:
Adam Bishop wrote:
It appears the debugging switches don't work quite as I'd expect in
FreeRADIUS 3 when RadSec is configured.
Yes. Because of OpenSSL limitations, the server MUST have multiple
threads when using
Thanks Alan D
understood. I will use unlang in accounting.
Thanks
On Wednesday, October 9, 2013, Alan DeKok wrote:
Russell Mike wrote:
So if you want to do something when the users traffic is over the quota,
you have to do it in the accounting section.
Could you please kindly indicate
On 10/07/2013 04:18 PM, Alan DeKok wrote:
After many years of development, the FreeRADIUS team is happy to
announce Version 3 of the world's most popular server. The release was
delayed from June in order to track down and solve a number of
last-minute issues. We'd like to thank all of the
On 09/10/13 16:36, Arran Cudbard-Bell wrote:
On 9 Oct 2013, at 15:47, Alan DeKok al...@deployingradius.com wrote:
Adam Bishop wrote:
It appears the debugging switches don't work quite as I'd expect in FreeRADIUS
3 when RadSec is configured.
Yes. Because of OpenSSL limitations, the
John Dennis wrote:
3.0 is not on the download page http://freeradius.org/download.html nor
is there a download link on the above announcement page.
The announcement says: Version 3.0.0 (sig) has been released...
The 3.0.0 is a link.
I've added a link on the download page.
Alan DeKok.
Arran Cudbard-Bell wrote:
Isn't it required for doing any RADIUS over TCP?
Nope. Only SSL.
The reason is that sometimes reading from an SSL socket requires SSL
writing data to the other end. So you end up with both ends waiting for
something. And that knowledge is buried inside of
Phil Mayers wrote:
Perhaps architecturally, but not inherently; you could, at least in theory:
1. Receive 4-byte length
2. Sanity-check the length
3. Allocate buffer
4. Read on TCP socket non-blocking in normal select loop until you've
filled the buffer
5. Parse packet from buffer,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Why are you so keen for 2.2.2 release? The delay is down to an issue which
needs identifying and testing. people who download the HEAD of 2.2.x and test
help at this point.
alan
- --
Sent from my Android device with K-9 Mail. Please excuse my
On 8 Oct 2013, at 10:10, Russell Mike radius@gmail.com wrote:
Hi List Members
i have been reading archives and tying to understand for some days now, but
unsuccessful. i am currently working to extend data volume control up to
10GB, which is requirement for the organization. Is
It might actually be an idea to add those to the internal dictionary to make
it a bit easier.
Just to clarify there are two reasons why your current config isn't working:
1. rlm_sql stores the value as a proper 64bit integer, not in the two 32bit
chunks represented by Acct-Input-Gigawords
Congratulations! Thank you again for all of the countless hours you spend on
improving the best and most flexible RADIUS server. One question though - is
there a typo in the V2 upgrade link below? When I click on it I get a 404
error..
Upgrading instructions are available here:
like to upgrade to 2.2.2 to see if the memory issue improves.
Thanks,
Yu Wang
-Original Message-
From: Alan Buxey [mailto:a.l.m.bu...@lboro.ac.uk]
Sent: Monday, October 07, 2013 3:59 AM
To: FreeRadius users mailing list; Wang, Yu
Subject: Re: 2.2.2 release date
-BEGIN PGP SIGNED
Dear Arran C. Bell,
Thank you very much, i am extremely grateful for your advise and guidelines
for troubleshoot also. i am currently experimenting a different
rlm_sqlcounter using CoovaChilli dictionary All-In-MB. In result, i can
store short number in db. This counter would reset at 2TB with
Neal wrote:
When I click on it I get a 404 error..
Upgrading instructions are available here:
https://github.com/FreeRADIUS/freeradius-
server/blob/release_branch_3.0.0/raddb/README.rst
That link would have changed when the release was officially renamed
from release_branch_3.0.0 to
Congratulations! Thank you again for all of the countless hours you
spend on improving the best and most flexible RADIUS server. One
question though - is there a typo in the V2 upgrade link below? When I
click on it I get a 404 error..
Upgrading instructions are available here:
On 8 Oct 2013, at 14:09, Garber, Neal neal.gar...@iberdrolausa.com wrote:
Congratulations! Thank you again for all of the countless hours you spend on
improving the best and most flexible RADIUS server. One question though - is
there a typo in the V2 upgrade link below? When I click on
On 8 Oct 2013, at 15:40, Russell Mike radius@gmail.com wrote:
Dear Arran C. Bell,
Thank you very much, i am extremely grateful for your advise and guidelines
for troubleshoot also. i am currently experimenting a different
rlm_sqlcounter using CoovaChilli dictionary All-In-MB. In
Dear pple,
I have looked for this and failed to get it, i have users with set volume
limits and they get knocked off once they hit the limit, however ; i want to
have this taken to the next level, i.e once the limit is hit, the user's
profile be changed and they can only get to certain website
1 - 100 of 59048 matches
Mail list logo