f Janet Graff <004dc9e91b6d-dmarc-requ...@listserv.ua.edu>
>> Sent: Thursday, October 13, 2016 1:14 AM
>> To: IBM-MAIN@LISTSERV.UA.EDU
>> Subject: Re: Changing the primary AUTHID using RACROUTE
>>
>> >Put the address of the new ACEE in ASCBSENV and/or TCBSEN
BM Mainframe Discussion List > on behalf of Janet Graff <
> 004dc9e91b6d-dmarc-requ...@listserv.ua.edu >
> Sent: Thursday, October 13, 2016 1:14 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Changing the primary AUTHID using RACROUTE
>
> >Put the address of t
016 1:14 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Changing the primary AUTHID using RACROUTE
>Put the address of the new ACEE in ASCBSENV and/or TCBSENV as appropriate?
>J R
I think it's ASXBSENV.
For my test application TCBSENV is 0.
I get a S0C4 when I do attempt to replace
>For simplicity and safety,you could attach a subtask, and do the VERIFY (and
>the cross-memory call) from that subtask. Then, on the VERIFY, if you >omit
>the ACEE parameter RACF will (as documented in the RACROUTE book) put the ACEE
>address into TCBSENV for you. If the cross-memory server >is
>I'm afraid we still don't know enough about how your cross-memory server is
>operating. In an earlier post you implied that it will choose whether to >use
>the primary or secondary ID. How does it make that choice? And how does it
>find both of them.
>If you change ASXBSENV you are changing th
On Thu, 13 Oct 2016 00:29:58 -0500, Janet Graff wrote:
>Aha, I just released I have to be in Key 0 to store into the ASXB. Can
>someone confirm that to change the ACEE in use, I have to update ASXBSENV?
>That there is no macro that will do this for me?
I'm afraid we still don't know enough ab
>>Put the address of the new ACEE in ASCBSENV and/or TCBSENV as appropriate?
>>J R
>I think it's ASXBSENV.
>For my test application TCBSENV is 0.
>I get a S0C4 when I do attempt to replace ASXBSENV despite being authorized
>and in supervisor mode. It feels like there is a RACROUTE macro or
>Put the address of the new ACEE in ASCBSENV and/or TCBSENV as appropriate?
>J R
I think it's ASXBSENV.
For my test application TCBSENV is 0.
I get a S0C4 when I do attempt to replace ASXBSENV despite being authorized and
in supervisor mode. It feels like there is a RACROUTE macro or equival
Put the address of the new ACEE in ASCBSENV and/or TCBSENV as appropriate?
Sent from my iPhone
On Oct 12, 2016, at 21:36, Janet Graff
<004dc9e91b6d-dmarc-requ...@listserv.ua.edu> wrote:
>> Thanks for the info. It helps a bit, but not enough.
>
>> First, just to make sure you know, you can
>Thanks for the info. It helps a bit, but not enough.
>First, just to make sure you know, you can't do a RACROUTE REQUEST=VERIFY
>while running in cross-memory mode. You would need to create a >request for
>another task running in your server primary, queue the request to the task,
>and suspen
in the TSS and ACF2 environments.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Janet Graff
Sent: Wednesday, October 12, 2016 4:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Changing the primary AUTHID using RACROUTE
&g
On Wed, 12 Oct 2016 18:53:29 -0500, Janet Graff wrote:
>I am writing a test program for a system level task. The system level task
>accepts cross memory service calls from various address spaces including CICS,
>IDMS and IMS so it needs to be able to handle secondary ACEEs. Instead of
>bring
On 12 October 2016 at 18:25, Janet Graff
<004dc9e91b6d-dmarc-requ...@listserv.ua.edu> wrote:
> I changed the TERMID to point to a D'0' but I'm getting the same error message
>
> ICH408I JOB(JIGRACF ) STEP(RUN ) 944
> LOGON/JOB INITIATION - USER AT TERMINAL NOT RACF-DEFINED
> IR
>It would help to know why you want to do that, and what you intend to do after
>you have the ACEE. It's possible that there are alternatives that >would be
>better, which we might recommend if we had some more information.
>However, you don't _need_ a TERMID unless you're doing a RACROUTE
>R
day, October 12, 2016 3:26 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Changing the primary AUTHID using RACROUTE
>From your current ACEE?
>http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r
>1.ichb200/ich2b2_ACEE_and_related_control_blocks.htm
>52 (34) ADDRESS 4 ACEE
On Wed, 12 Oct 2016 15:58:12 -0500, Janet Graff wrote:
>I have an application and I want to change the the userid. I have the RACF
>macros coded but I'm having trouble coming up with the >source of TERMID.
>Where do I get the TERMID?
It would help to know why you want to do that, and what yo
>From your current ACEE?
>http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.ichb200/ich2b2_ACEE_and_related_control_blocks.htm
>
>52 (34) ADDRESS 4 ACEETRMP Address that points to the terminal ID. The field is
>zero for non-terminal users.
>Charles
Yes, the Batch job is
>From your current ACEE?
http://www.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.ichb200/ich2b2_ACEE_and_related_control_blocks.htm
52 (34) ADDRESS 4 ACEETRMP Address that points to the terminal ID. The field is
zero for non-terminal users.
Charles
-Original Message-
18 matches
Mail list logo