Hello Builders,
I have had some interest in Bob's KR2. Some have asked if I would be
willing to sell parts. I have done some checking with other builders and
thought about this idea. I am willing to sell the plane without the engine
as some builders want different engines. So then I would
are involved in your local flying clubs or EAA
chapters, please let them know this project is for sale.
Thank you for your time.
Cheryl
Regards,
Bob Lee
On Fri, Jun 19, 2015 at 9:55 AM, Bob Lee via KRnet
wrote:
> Hello KR Community,
>
> It is with great sadness that I need to re-l
9:09 AM, R. Lee Jarvis via KRnet <
> krnet at list.krnet.org> wrote:
>
> > Hi Cheyl,
> >
> > The link isn't working. Can you check/correct it?
> >
> > Thanks!
> >
> >
> > Sent from my Verizon Wireless 4G LTE smartphone
> >
> >
&
Hello KR Community,
It is with great sadness that I need to re-list Bob's KR2. The gentleman
who purchased the airplane last year and asked me to hold it till the
weather was good for transporting it has backed out of the deal. The
website to look at Bob's plane and work is
Hello All -
By now all know that I have had the opportunity to sell Bob's KR2 project.
I have sold it to Bob Russell from Canada. Please welcome him to the KR
family and help him finish Bob's project. I think it is fitting that his
project was sold to another Bob.
I thank all of you who help me
Hello -
My name is Cheryl Lee and I am writing on behalf on my husband Bob Lee. He
is a fellow aircraft builder and is part of these mailing lists. Some of
you have met him over the years at the KR Gatherings and he has handled the
KR Gathering webiste up until this year. Late last fall Bob
ee going into the tank. On one side place a baloon and on
the other side place the compressor. That way, the baloon will limit the
pressure in the tank and you won't distort it with the pressure.
Regards,
Bob Lee
KR-2, 90% done only 68% to go!
Suwanee, GA USA
an outage from a few
minutes to two hours. Sorry for any inconvevnience this might yield.
Regards,
Bob Lee
KR-2, 90% done only 68% to go!
Suwanee, GA USA
ly throttled back or at high
altitudes"? What additional data besides ignition trigger does the P-mag have
to decide to advance the ignition?
Regards,
Bob Lee
KR-2, 90% done only 68% to go!
Suwanee, GA USA
recommend calling them
direct at 618-244 7100 and tell them you are with the KR
Gathering. They have doubles and singles with queen size beds. If
you have any problems, shoot me an e-mail at flesner at frontier.com.
For Bob Lee, please post to the Gathering site. Thanks..
ind of valve job do you use?
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
imers about Gatherings gone by."
Just in case some of you are wondering, there are only 250 days till the
2011 KR Gathering in Mount Vernon, IL on September 9-10, 2011!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
Charles Smith
<< Does anyone know how to identify a type 4 engine? >>
The easiest way is to look at the heads:
Type IV exhaust comes out the bottom of the head.
Tpye I exhaust comes out the front and rear of the head
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
u didn't so I let it happen". That was one
of those learning moments where you get a lifetime lesson in seconds. All
these years later I scan the ball continuously to make sure I don't skid
into a problem.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
90% done only 69% to go!
that
page, click on "Don Beachum's Retract Gear" and it will take you to the
images Chris provided. My web page is: http://kr.flyboybob.com.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
Dan Heath wrote:
<< Anyone know where I can buy VE >>
I always got VE from Dan Diehl. It worked out much better than the AS stuff
because he promoted it properly for the current season to give a reasonable
working time.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
perhaps you could search the archives and find that in the mean time.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
asement to work on my KR!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
If you left your Hair Dryer at the KR Gathering rescuing a rained out cell
phone please contact me off line so I can get it back to you!
Bob Lee
mailto: flyboyb...@gmail.com
of information and pre-planned proceedures leads to overall
system reliability and safety of flight. This makes the alternator failure
a maintenance item rather than a flight safety issue. Hope all goes well
with the alternator repair so that you can fly to the Gatering. See you in
5 days!
Re
The server for krgathering.org has failed and it is being repaired. No eta
yet for it to be back online.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
e saw horses for
the tail end.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
e issued. I had not lived at the address
on my pilot certificate for 41 years. I guess that makes me older than Joe
looks too!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
FYI my oil cooler is on the firewall so add a few more pounds if
you've got the oil cooler on the engine.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
Joe,
You wrote: <>
What wing do you have on your KR (airfoil?, taper per plans?, span?). I'm
interested in how your kr might relate to mine for altitude performance.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
at to the cooler.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
ations Dan, you are finally past the teething stage. Don't let
Jones talk you into getting a deer strike!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
ide and roll onto the horizontal
stab. From there it's just like getting out of bed.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
my KR. But for
now land-lubber shots will have to do! Everybody keep building, we're
looking for your sunset shots too!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
In addition to the attendee's listed by Larry, there were three more added
to the list this morning:
Mueller Paul
LangfordMark
Teate Stephen
The pre-registration form has a table at the top that shows who has
registered.
See you in Mt Vernon
Regards,
Bob Lee
N52BL KR2
The pre-registration form has been online for a couple of months. The usual
list of KRGathering attendees has not been provided because only Bob Lee and
Larry Flesner have registered. When someone registers, the list will be
included.
Bob
-Original Message-
From: krnet-boun
nough for a KR". Who wants to
have a one bladed prop anyway?
Regards,
Bob Lee
N52BL KR2
Suwanee, GA USA
92% done only 67% to go!
think you need vaccume because they used to do it that
way. What is the best way for you to get your KR on the mission you want it
on now? That is the only thing that matters.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% complete, only 51% left!
David Swanson wrote:
<<
Anyone know how I can get ahold of Bob Lee? Cant find his email
anywhere.
want to find out how his plan flying 1800nm is doing.
>>
David,
A KR-2 really can't go that far. You can only fake out the flight plan gods
by picking the time of year fo
cles jog your memory?
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
http://kr.flyboybob.com
mailto:b...@flyboybob.com
14 matches found
14 matches displayed
Title Author Issue
The Davis DA-1, A Research and Development Project Leon Davis
December 1958
I started building ai
,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
http://kr.flyboybob.com
mailto:b...@flyboybob.com
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Mark Langford
Sent: Monday, April 02, 2007 11:35 PM
To: KRnet
Cc: Corvair engines
ambient air the peak
surface temp is 162F with white; 171F with yellow; 220F with Green or Red;
and 237F with Black
(http://kr.flyboybob.com/images/kr2/kr2plans-drwg90.jpg).
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
http://kr.flyboybob.com
b...@flyboybob.com
lly seated on the
alternator.
Now for the important questions: What is the normal engagement depth
clearnace for the magneto drive puck? Does anyone have access to an
installation manual that gives specifications for the magneto drive puck
clearnaces?
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
ave never had evidence of a KR wing failure in flight and it would be
helpful to know if that is still true after Steve's crash.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
Anyone that is interested in photos of the KRGathering should look at
http://KRGathering.org for a few.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
This photo, http://flykr2s.com/langford/P9300038.JPG needs the following
caption:
I told you to keep the oil "INSIDE" the engine!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
pressure and where is the low pressure? Once you know
that then you can maximize the flow from high to low! What's all this suck
blow stuff anyway? The problem here is the terms being used, not the
engineering.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
ry out of the motorcycle can then be put in my
lawn tractor. It takes a little maintencance but the price is cheep $40
every two years and you cover your KR, motorcycle, and lawn tractor.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
The attached post came in this morning advertising a 110 HP Corvair motor
for sale on the AirVW Yahoo Groups list. If you are interested contact
Terry directly. I don't know anything about it. I'm just passing on the
lead to anyone that might be interested in a Corvair.
Regards,
Bob Lee
N52BL
amped steel pully that I can get the spline out of but if that
doesn't work I'll need to figure out how to make the one I've got softer.
Does anyone know of a technique to soften cast steel so you can machine it?
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
and gobbed
on some epoxy. That car ran for another 100,000 miles before we sold it
with the ornage glob of epoxy still on the side of the block. Some times
it's better to shade tree engineer a solution! First you need to decide if
your problem is an oil leak or a cracked block?
Regards,
Bob Lee
engine supplied by GPASC. >>
What size prop do you intend to use? (52" in flight adjustable)
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
Boulevard. I got a King Non-Smoking
for $51/day. I was planning on camping but at these prices why not have a
real bed?
See you in Mt Vernon in 29 days!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
he entire KR
community.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
material to
find ounces of gold. You guys dumping the "material" in the hopper could
help us all out here if you cared to do so.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
the plane slows down, both neat features to have available.
YMMV!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
H!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of william Clapp
Sent: Friday, August 11, 2006 5:35 PM
To: kr...@mylist.net
Subject: KR> KR Gather
ks a million Marty!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
t we dreem that there
will be communication on this forum?
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Dana Overall
Sent: Tuesday, August 08, 2006 8:23 AM
To: kr...@mylist.net
S
wondering how late the
festivities go on in the campgrounds.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
more days till
the gathering. If your KR is flying and you have not yet made the decision
to attend don't let this opportunity to be part of a record setting KR
Gathering pass you by.
See y'all in Mount Vernon in 66 days,
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
Dan,
Wing loading is the weight divided by the wing area. The answer comes out
to be pounds/sq-ft. As an example: 900Pounds / 78sq-ft yields a wing
loading of: 11.5 pounds/sq-ft.
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
-Original Message-
From: krnet-boun
Mark,
Try DigiKey.com. They have it all!
Regards,
Bob Lee
N52BL KR2
Suwanee, GA
91% done only 65% to go!
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Mark Jones
Sent: Thursday, June 22, 2006 10:11 AM
To: KRnet
Subject: RE: KR
Steve Glover Trabuco Canyon, California
steven w jonesvenice,fl
Terry TeerAckerman, MS
Tommy Waymack Pine Bluff,Arkansas
William Clapp Valdosta GA
Regards,
Bob Lee
Phil,
I don't know what kind of medicine the Shelia's hand out down under, but up
here in the northern hemisphere when the wife turns off the "medicine" a
trip to the hanger will not cut it. The only thing that helps in that
situation is a cold shower!
Bob Lee
KR2 91% comple
Mark Jones asked:
<< Larry, can you update this list? >>
The preregistration list has been updated this morning as of 06:00 EDT. We
are still at 79 registrations. It can be found at:
http://krgathering.org/pre-reg-form.htm.
Regards,
Bob Lee
eb site.
Go to http://krgathering.org/pre-reg-form.htm and you can see what you have
on order.
Regards,
Bob Lee
N52BL KR2
90% done only 62% to go!
Mark,
I can't tell if you are bragging or complaining? Anyway, have a great
vacation, you will need the rest so that you can finish your KR.
Regards,
Bob Lee
KR2 N52BL 91% done only 54% to go!
-Original Message-
From: krnet-bounces+bob=flyboybob@mylist.net
[mailto:krnet-bounces
side regardless
of the integrity of the opposite side fuel path.
Regards,
Bob Lee
KR2 N52BL 91% done only 54% to go!
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Dan Heath
Sent: Tuesday, September 21, 2004 8:41 PM
To: kr...@mylist.net
Subjec
.
See you at MVN in a few hours.
Regards,
Bob Lee
KR2 N52BL
91% done only 54% to go!
haven't registered, go to KRGathering.org and let us know you will be
there. None of the CA contingent have committed to the Gathering this year.
If you guys show up, we could have 30 KRs at one place at one time Only
three more weeks.
Regards,
Bob Lee
__
KR-2
airplane without flying! Your KR has flown and mine has not
yet, so consider the source of this recommendation.
Regards,
Bob Lee
__
3380 Ashton Drive
Suwanee, GA 30024
Cell:(404) 538-1427
Phone: (770) 844-7511
Fax: (770) 844-7501
mailto:b...@flyboybob.com
http://flyboybob.com
-Original Message-
From: Bob Lee [mailto:b...@krgathering.org]
Sent: Monday, September 06, 2004 4:28 PM
To: KRnet
Subject: KRGathering Pre-Registration
Netters,
This is a post for those of you that are planning on attending the
KRGathering. Many of you have been contacting Larry
rds, so take a look at this
link to see what I'm talking about:
http://flyboybob.com/images/kr2/flapwalkingbeam.jpg. I used a very
sophisticated freeware drafting package called bob-draw-pro so no comments
about the quality of the drawing, you get what you pay for.
Regards,
Bob
avionics.
I'm going down into a secure bunker now to work on my KR2. The build it
light and simple brigade can lock and load, my airplane factory is a
hardened facility!
Regards,
Bob Lee
_
N52BL KR2 Suwanee, GA
91% done only 51% to go!
Phone/Fax: 770/844-7501
mailto:b
. Before
everyone panics that the link is wrong, let me reformat it to be less than
76 characters and see if it will get past the list forwarder?
Instrument panel link:
http://flyboybob.com/images/kr2/n52bl/electric%20and%20instrument/inst01.jpg
Regards,
Bob Lee
__
N52BL
Dan Heath asked: "How did you say that you are driving all those gyros"?
Well another senior moment, I stated the horizon and dg were 400VAC. In
truth, they are 400 cycle 120VAC units powered through an inverter from
12VDC. The turn and bank is powered directly from 12VDC.
Regards
website at: http://flyboybob.com/web_pages/kr2/weight_and_balance_1.htm.
Regards,
Bob Lee
__
N52BL KR2 Suwanee, GA 30024
91% done only 51% to go!
Phone/Fax: 770/844-7501
mailto:b...@flyboybob.com
http://flyboybob.com
flying to
see if our creations do what we expect???
Keep on building and see ya at the Gathering.
Regards,
Bob Lee
__
N52BL KR2 Suwanee, GA 30024
91% done only 51% to go!
Phone/Fax: 770/844-7501
mailto:b...@flyboybob.com
http://flyboybob.com
74 matches
Mail list logo
