that the signal vacuum port underneath is not plugged up,
or blocked. If no vacuum signal, no fuel flow; same with my Mikuni carbs on
the Yamaha V-Star.
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
___
Search the KRnet Ar
With the possible exception being the actual control surfaces themselves, if
things work out that you have to fabricate them separate. Otherwise, invest
in something else that yield actual improvements, i.e. better engine, wheel
pants, lighter high quality paint, Sensenich Prop, etc...
Colin
deflected do they cause the designed drag
to balance the outboard lift/drag induced (but that is another story)...
Colin Rainey
brokerpi...@bellsouth.net
down.
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of John
Sent: Thursday, May 24, 2007 10:41 PM
To: kr...@mylist.net
Subject: KR> help with aileron li
uot;gecko" hands down. So being a
member does have perks, as well as protecting our airports, and privileges
to fly!
AIG is an umbrella company with many subsidiary insurance companies, auto
and aviation just a few...
Colin Rainey
brokerpi...@bellsouth.net
g for easy
attachment, and a tray to roll the wings onto and off the trailer.
Colin Rainey
N96TA
and proven, so the more documentation the
better.
Otherwise plan to use/get a PPL...
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
Netters
There is a Corvair engine for sale on eBay
Item number: 220098284796
Big jump for any who need an engine already assembled for a great price.
>From the looks of it you cannot buy and assemble it yourself for this price.
Colin Rainey
brokerpi...@bellsouth.net
Netters
Engine sold thanks.
Now back to other KR news...
Colin Rainey
brokerpi...@bellsouth.net
in a KR you can hold any plane!
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
no
reason why the plane cannot be certified as all KR2 and KR2S models
previously have been, and then operate under LSA rules.
Source: EAA.org website
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
.
Good luck. Just cleaned the house out of infestation. Took out one whole
side of the living room and one bedroom.
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf O
.
If you still have a problem with 3 running that rich, look at that cylinder
specifically: compression, valve seating, intake valve hanging open, etc...
Colin Rainey
brokerpi...@bellsouth.net
ink the Mazda is too heavy, and high
output. Better to use a different engine with slightly less HP but just as
much torque after the re-drive and stay with what your firewall/airframe can
handle...
JMHO...
Colin Rainey
brokerpi...@bellsouth.net
N96TA
. It is
a good radio. It also comes with its own built in intercom, though I did not
set mine up that way.
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
ld convert mine except I am still in the
engine swap mode. I may still later...
Colin Rainey
brokerpi...@bellsouth.net
used to include reliability for cya) needs a maintenance
flight by a rated pilot certifying the airplane is safe and can return to
service. Just a flight and log entry signed by the pilot making the flight
and all good...
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
or fuel injection that offers vacuum advance, and add
a vacuum advance distributor. If you are compelled to have separate ignition
systems, get the universal MSD crank trigger system and MSD box for complete
redundancy. I published the numbers a while back for the parts needed.
Colin Rainey
brokerpi
and crimper. The
must use it due to space issues, etc...
If it were alot more economical, I know Cessna and Piper would use it and
they are not except maybe on the throttle, mixture, or prop controls. I
would think that even a pushtube system would be should be cheaper...
Colin Rainey
brokerpi
or fuel injection that offers vacuum advance, and add
a vacuum advance distributor. If you are compelled to have separate ignition
systems, get the universal MSD crank trigger system and MSD box for complete
redundancy. I published the numbers a while back for the parts needed.
Colin Rainey
brokerpi
e in
the behavior of the plane to speak of at all.
Just some ideas for thought. I was once considering a PSRU or re-drive as
some call them, for my 1915 cc VW original engine. Had I installed that, I
would have been 4 to 5 inches higher. This may be an issue many builders
have contemplated or eva
at the lower rpms, with less cfm demand. Use The Auto
Mathbook to find you engine demand, then match the carb to it).
The Averovee and of course the Ellison are other examples of drastic
improvements.
And of course then there is fuel injection made easy:
http://www.lnengineering.com/fi.html
Colin
For those that it matters to, here is the book that I spoke of; I finally
found it. It is the reference that I used when analyzing what size pitch,
blades etc...
"Propeller Making for the Amateur" by Eric Clutton with forward by propeller
maker Ray Hegy.
Just food for thought.
Co
...
It cannot qualify as an Amateur Built Plane "...built for the builder's
education and enjoyment".
Colin Rainey
N96TA
brokerpi...@bellsouth.net
.
Biggest safety issues seem to be power on stall behavior, and how large
changes in power settings up and down would effect pitch. If it is in the
same centerline position I find it hard to believe there would be any yaw
change to contend with. Then again I am not an engineer...
Colin Rainey
brokerpi
The only advantage that I can see to make the changes suggested is if the
airplane was going to be a dedicated high altitude flyer. This suggested set
up would eliminate the situation Mark L is describing of having his plane
nose up at high altitude.
The problem is that based on what I am hearing
I like what I have got. Not going online to vote, Virg
Same here...
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a m
fuel pressure requirements than TBI units did.
These lines are good for at least 80 psi, and if gotten from an early Volvo
or VW fuel injection are good for over 100 psi (GM units are designed for
30-45 psi with 60-80 psi max; VW or Volvo early 240 & 760 models 80 psi max
100 psi).
Colin Ra
at low speeds. I have successfully
landed my KR2 in 25 knot 45 degree crosswinds, gusting to 35 knot (which
puts the 90 degree winds at a total of 18 knots gusting to 25 knots
according to my trusty E6B).
Colin Rainey
brokerpi...@bellsouth.net
no reason not to have one.
As Larry F says, your results may vary (ALOT!)....
Colin Rainey
brokerpi...@bellsouth.net
the fence at 75 mph;
numbers at 65 mph
Colin Rainey
brokerpi...@bellsouth.net
applied), and parking.
Colin Rainey
N96TA Taildragger
___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
lways look for a set of cases that has intact studs." My
manual doesn't come straight out and say so, but almost does, that they
should be pulled and helicoiled. I guess the later manuals just state it
more clearly. Thanks for clearing that up guys...
Colin Rainey
brokerpi...@bellsouth.net
eation, so it needs to fit YOUR BILL, not someone else's.
Happy building....
Colin Rainey
brokerpi...@bellsouth.net
to a local
supplier for the exact right parts if needed. Call him first. He designed
and built it.
Colin Rainey
brokerpi...@bellsouth.net
an inexpensive thermac vacuum sensor that
responds to temp, directly blowing on the carb to warm it, or duct the
intake air that way full time, just like a car has for cold startup cold
running. Even today alot of fuel injected cars have it. Gotta be a reason,
and this seems like a good reason to me..
!
Colin Rainey
brokerpi...@bellsouth.net
from full to reserve). I will be using my
fuel return line with a "Y" in it for the rear tank refill, with a check
valve to prevent back flowing into the rear tank, since I will be using fuel
injection. But I know LOTS of planes still use and will use carbs and
gravity flow....
Colin Raine
the outer wing panel just enough room to insert form connection. It is
harder to align for one bolt top and one bottom, but I feel better about the
fact that it IS aligned with one bolt.
Colin Rainey
brokerpi...@bellsouth.net
e the heat a little bit better but will still die...
Colin Rainey
brokerpi...@bellsouth.net
The only place that I have seen ARP bolts used is in rod bolts. WW does
recommend that the rod bolts get this treatment when they are reconditioned.
Like Mark said block mounting studs stay in
Colin Rainey
brokerpi...@bellsouth.net
to be removed. Specifics on lengths and exact procedures will be
difficult because no two KR's have the exact same dimensions...
Colin Rainey
brokerpi...@bellsouth.net
for this, on Page
38. He definitely DOES NOT recommend removing studs if making a 2700 into a
3100 due to clearance issues.
Unless this has been edited since then, my manual #6528says NO!
Colin Rainey
brokerpi...@bellsouth.net
pose.
I have worked closely with FSDO 15 in Orlando Florida for a number of years
and I still get the I don't know or I am not sure from an ASI or SPM, if it
is something they are no schooled on or a division they don't handle.
Colin Rainey
brokerpi...@bellsouth.net
, and overall make our flying safer and more reliable.
JMHO
Colin Rainey
brokerpi...@bellsouth.net
...
Hope this helps some
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Home Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bellsouth.net
!
Sorry for getting on a soap box..
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
plea
. Let
us know how it goes, because there is a definite interest on building LSA
compliant if it can be done AND approved...
Colin Rainey
brokerpi...@bellsouth.net
break
up in flight (maybe the slower speed helped with that at 100 mph).
Hope this helps some builders at this stage or later on their
building/inspections...
Colin Rainey
brokerpi...@bellsouth.net
of ground clearance, so
the answer? Multi-blades...
I too will be running a 3 blade Warp Drive once I settle on which engine I
will install (already have the prop).
Colin Rainey
brokerpi...@bellsouth.net
ls, re-drives, and
multi-bladed props. I am not knocking anybody here. I am just saying, if
there are good solid ideas that other flyers are proving, maybe we should
give a hard look to how they could benefit us as well
Colin Rainey
N96TA
brokerpi...@bellsouth.net
with Sensenich (though they are pricey). It never hurts
to check Ebay either. I got a good prop from another builder there, and was
very happy with it. Best of all the price was great!
Colin Rainey
brokerpi...@bellsouth.net
I know this is not Kr stuff, but Merry Christmas to all netters!
Hope everyone has a safe and happy holiday.
This is not meant to start a rash of Goodnight Bobby Joe, etc... emails
Colin Rainey
brokerpi...@bellsouth.net
ing the correct rpms. You will need to use a vacuum
regulator, but should find it ALOT easier to get installed and setup.
http://www.aircraftspruce.com/catalog/inpages/venturi3.php
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
_
is the spin training of Private
Pilots. "In the day" all students were required to be taught and demonstrate
spins. Later it was found that spin awareness, and avoidance was better;
actual spin training encouraged exploring spins on their own.
Colin Rainey
brokerpi...@bellsouth.net
, the fixed gear is 10 to 30 mph faster, depending
on how clean the fuse is. It is lighter, yielding once again greater speeds
capable (and lower stall speeds), better climb, and longer range. AND don't
forget that annual maintenance (if it lets you get to the year end) to keep
up the retracts.
Colin
benefits, but that is a whole 'nother story...
Colin Rainey
brokerpi...@bellsouth.net
the schools that if you wanted to have an accident, take a CFI
along. So you are MUCH better off taking an orientation ride in a fellow KR
pilot, than taking a CFI along in your plane!
Colin Rainey
brokerpi...@bellsouth.net
).
That is why I will run a 3 bladed Warp Drive. I have read of two netters
already that have run first a 3 bladed Warp Drive then a Sterba with no
appreciable increase in speed, but probably a drop in climb rate.
Colin Rainey
brokerpi...@bellsouth.net
ol
feel, I was able to lap the pattern, and land without incident.
Built correctly, a KR2 or S is a great little plane. Keep that CG right and
have fun....
Colin Rainey
N96TA KR2 taildragger
brokerpi...@bellsouth.net
mode to
verify the CDI reading, and a useless DG and AI. A month later I found that
ALL the paperwork had been forged for IFR. Would not have helped me if I
didn't know how to use what I have. Be careful netters...
Colin Rainey
brokerpi...@bellsouth.net
but we are not alone, and it can get crowded...
Colin Rainey
brokerpi...@bellsouth.net
just bolt on an EFI System....
Colin Rainey
brokerpi...@bellsouth.net
Here is a link to one system that I found that looks very complete and well
tested. Proven on VW/Porsche engines:
http://www.lnengineering.com/fi.html
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
Colin, that brings up a very good question, who makes an EFI
/mvn2004/
Colin Rainey
brokerpi...@bellsouth.net
is not the problem. It is some of its properties that make it unsuitable for
aircraft, unless special precautions are taken to prevent problems. Alcohol
is also very corrosive so fuel components must be made compatible to it, or
short term use will result in problems...
Colin Rainey
Independent Loan Officer
one or two.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Home Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bellsouth.net
t function. HOWEVER, these are generalizations, and there are
more combinations of props engines, and turbos than can be discussed here (I
think). My personal opinion is to decide whether the engine will be full
time turbo, and adjust the entire setup, or no turbo...
Colin Rainey
brokerpi...@bellsouth.net
they are selling them to the unwary. Do NOT take the
advice of the counter guy at Autozone or Advance or Central Auto Parts or
NAPA when it comes to the aftermarket performance parts. If they knew as
much as they think they do, they would not be working there...
Colin Rainey
brokerpi...@bellsouth.net
The old lawnmower ignition is called "magneto"
ignition.
Try this on for size for a modern spin on the "old lawn mower" ignition.
Ready to install for VW guys, and I am sure not too hard to adapt to other
engines.
http://www.revmasteraviation.com/products/cdi_ignition/ind
en aware of
aircraft, but you definitely were aware of him. One of those nasty catch
22's that you can't win IF anything goes wrong. Good choice to go around! :)
Colin Rainey
Rocket kit for the RV6/7 or 8...
Colin Rainey
brokerpi...@bellsouth.net
le or nothing. Also, get the
book "Speed with Economy" to evaluate your plane better for better cruise
numbers and get that climb rate up. Then you will have a fast and low risk 2
seater
Colin Rainey
brokerpi...@bellsouth.net
and sanded and primed easy.
Colin Rainey
brokerpi...@bellsouth.net
.
Just my humble opinion
Colin Rainey
brokerpi...@bellsouth.net
fter the y closest to the coils, solder in the diode paying attention to
the provided diagram on the package for direction of current flow allowed.
ALL DONE! Now the tach will read on both coils. The selector switch already
in the system will choose the coil and the tach will read correctly.
Co
und signal and the possibility of the tach grounding out
the coil due to tach failure.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Home Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bellsouth.net
sures against total failure, and should last a lifetime of
flying anyhow.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Home Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bellsouth.net
-Original Message-
DID YOU SELL THE CORVAIR MOTOR? OR DO YOU STILL HAVE IT? THANKS MAX BUTLER
CHEYENNE WYOMING
Sorry net I believe that he intended this just to me, but for any who are
curious, yes the engine is sold.
Thanks,
Colin Rainey
brokerpi...@bellsouth.net <mailto:broke
not
run a tooth counter, unless you like the same unreliability you say the Tiny
Tach has.
Colin Rainey
brokerpi...@bellsouth.net
I hate to be a bad sport about this one but buy the book from WW. It has the
mount for the KR2 and S in it.
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of ol
xt to the
stick assembly, slot in the spar, and bellcrank for side to side movement at
the rear spar. Attach to the existing bellcrank of the aileron (clearance
may need to be made for ends depending on connection type).
Just my 2 cents...
Colin Rainey
brokerpi...@bellsouth.net
For those of you that need an engine and want a BIG head start, here is an
engine on Ebay:
Item number: 220033618930
Won't last long
Sorry gang but no more chances at the plane; not for sale any more.
Colin Rainey
brokerpi...@bellsouth.net
the
other and the tach grounding the whole system if it failed.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Home Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
-Original Message-
From:
Because those are for mags with p leads that get grounded to shut them off
instead of coils that receive power to turn them on.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Home Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bellsouth.net
engine from his site
in the same condition is $7900, so this is a great buy, and a big jump start
on the firewall forward
of a KR2 or S model. Contact me offline if interested.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Office
407.739.0834 Cell
407.557.3260
compared the new bolt to the old
bolt on such a critical assembly. No thank you, but no, I am no believer
that ANY certified plane is safer or better built, or better maintained than
an Experimental. On the contrary I tend to go the other way
Your opinion may be different
Colin Rainey
d in order to plan or estimate, you will need
to get very specific about your plan configuration and then talk to the
owners who have that...
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bel
Hey gang
Just a quick note that if anyone is looking for an engine, I have a Corvair
using WW parts, etc... and manual, and mount for KR2 tailwheel.
$4500
Contact me off net.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Office
407.739.0834 Cell
407.557.3260
hort final, and was safe
all the way, with full control. I would NEVER have considered a 3 point
landing in that wind (and I did 10 circuits that day).
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Office
407.739.0834 Cell
407.557.3260 Fax
brokerpi...@bellsouth.net
It is just easier in my opinion to ride on the mains to
well below flying speed, and then have the tail drop slowly around 40 mph
with no fear of lifting back off and good control already established.
To borrow Larry F's phrase:"as always your results may vary..."
Colin Rainey
Independent
It is also a recommended engine for use by the Velocity crowd, and I
understand from the owners that several are in use in different models
there...
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
-Original Message-
From: krnet-boun...@mylist.net [mailto
of the KR community at large
Colin Rainey
N96TA
I had one years ago but it flies just like the Extra 300 already in the
flight sim database. Just use it.
Also it is only good as a reference of performance and control, nothing like
the real thing.
Colin Rainey
Independent Loan Officer
Branch 2375
Apex Mortgage Company
386.615.3388 Office
. Not withstanding aircraft
differences the general concensus is that one should be proficient in both
types of landings.
Colin Rainey
brokerpi...@bellsouth.net
My type one had bored out lifter galleys so that Chevy hydraulic lifters
could be used. Locate your local VW high performance shop and they can tell
you all the mods practical for your engine type.
Colin Rainey
brokerpi...@bellsouth.net
that
it puts the fuselage lower relative to the main point of lift, adding a
small pendelum effect (more pronounced in high wing planes). The diehedral
has a leveling effect on the plane when upset by winds/updrafts etc...
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.
of a KR yet
Colin Rainey
brokerpi...@bellsouth.net
en your flying skill is NOT in question on test day, just the
plane's...
Colin Rainey
brokerpi...@bellsouth.net <mailto:brokerpi...@bellsouth.net>
___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message
not looking to part the plane out so please do not write me about different
pieces of equipment it contains. It sells one of two ways to a netter to
complete: engine alone or everything. Thanks, contact me off net if you want
more details, etc...
Colin Rainey
Independent Loan Officer
Branch 2375
1 - 100 of 236 matches
Mail list logo
