Re: [leaf-user] Any experiences about USB GPRS/UMTS Modem

> Hello > > Are there some documentation or howtos or experiences about using a USB > GPRS/UMTS Modem on Bering ucLibC 3.1? > I am trying to realize a 3G/UMTS gateway using an alix board and a usb > 3g key gongle connected to the usb port of my alix board. > > Thanks, greetings > > Graziano > >

Re: [leaf-user] ubering4

29.08.2010 21:30, Stefaan Van Dooren пишет: > I'm trying to setup the new uBering4 (alpha) on ubuntu 10.04 LTS, but having > some difficulties. > I checked out cvs, modified make/MasterInclude.mk to point to the right gcc > and tried to run ./buildtool.pl build buildenv. > > This gave me an err

Re: [leaf-user] ubering4

29.08.2010 22:29, Stefaan Van Dooren пишет: > That did it. > > Thank you. > If you can - make patch, and I'll include it into main tree. P.S. What troubles were with -fno-stack-protector flag? This flag was added because something from buildenv (possible linker - I can't remember) had crash du

Re: [leaf-user] ubering4

29.08.2010 23:32, Stefaan Van Dooren пишет: > Andrew, > > This is the error I get when I leave the no-stack-protector flag in : > > creating cache ./config.cache > checking host system type... i386-pc-linux-gnu > checking target system type... i386-pc-linux-gnu > ch

Re: [leaf-user] ubering4

30.08.2010 20:49, Stefaan Van Dooren пишет: > Andrew, > > At first I didn't had gcc v3.3 installed. I installed it because at first I > couldn't compile the buildenv. SO after some reading I saw this in > http://leaf.sourceforge.net/doc/buc-buildtool.html: > >

Re: [leaf-user] ucBering4 ppp

30.08.2010 21:09, Stefaan Van Dooren пишет: > The buildtool.cfg for ppp contains an error > > >Server = cvs4-sourceforge >Revision = HEAD >envname = PPP_PATCH8 >Directory = ppp > > > > should be > > envname = PPP_PATCH9 > > Otherwise the build process just hangs on cat | patch..

Re: [leaf-user] uBering4 lcd4linux

31.08.2010 08:34, Stefaan Van Dooren пишет: > Using lcd4linux-0.10.1-RC2 instead of lcd4linux-0.10.1-RC1 and applying the > patch below, will successfully build lcd4linux. > > > Patch : > > http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=67;filename=lcd4linux-0.10.1_rc2-nordtsc.patch;att=1;bug=

Re: [leaf-user] Problems with LEAF Bering-uClibc 4.0-beta1

18.12.2010 23:26, Rich Schneck пишет: > So, I started to take the plunge and update my firewall. This is a problem > since I managed to kill my existing floppy disk. I can't wait to be done > with floppies. > > Anyhow, my hardware is an old Abit BH6 motherboard with P3-500 processor. > Unfortunatel

Re: [leaf-user] trying Bering 4 on WRAP box

23.12.2010 01:09, Victor McAllister пишет: > I did the following to build my compact flash. > > I put syslinux on a Compact flash and copied the files to the CF from a > windows box. > > I the booted the 486 iso version the CF attached through a USB port > > mount -t vfat /dev/sdb /mnt1 to mount th

Re: [leaf-user] bering uclibc 4.0

19.01.2011 19:10, kenneth joachim llanto пишет: > Hello all, > > Good day! > > I'm quite new in linux and in LEAF. > > What I'm trying to do is install the bering uclibc 4.0 to a > harddisk. And truthfully I'm a little lost.. > > This is what I was able to do as of now.. > -run the iso in a cd rom.

[leaf-user] buildimage fails if no .lwp files available

Hi all. I tried to use buildimage to assemble my compiled earlier distro - and I saw that it's crashed when no .lwp files is available: # ./buildimage.pl --image=Bering-uClibc_i686_isolinux_vga --relver=4.0beta1 cp: cannot stat `/var/testpoint/LEAF/buildtool/package/*.lwp': No such file or direc

Re: [leaf-user] LEAF 4 beta 2: cannot boot on net4501

03.02.2011 11:53, Graziano Brioschi пишет: > Hello list, > > I'm trying to install LEAF 4 i486 in a Soekris Engineering net4501 (CPU > AMD Elan SC520, 64Mb RAM) with no success. > During boot, on my serial console i can see: > > Loading /syslinux/linux. > Loading

Re: [leaf-user] Traffic shaping - wondershaper / ppp-shpr

23.02.2011 07:08, Mark Berndt пишет: > Hi list, > > I use wondershaper and it works ok, but I notice ppp-shpr in the packages > list. > > What is the difference? > Look at code. I didn't use wondershaper so I can't answer anything about it. ppp-shpr is oriented for usage on VPN/PPPoE/other PPP ser

Re: [leaf-user] Openswan kernel module broken in Bering-uClibc 4.0-beta3?

12.03.2011 20:44, Michal Kepien пишет: > > Yeah, I've double-checked. Maybe I have messed something up while > upgrading from 4.0-beta2. moddb.lrp? -- Colocation vs. Managed Hosting A question and answer guide to determini

Re: [leaf-user] Problems booting LEAF 4 rc1 onSoekris Engineering net4501

On 04/05/11 17:32, Charles Steinkuehler wrote: > > * I do not believe the ISA IDE controller has been ported to the unified > SCSI driver layer in the kernel. Have you tried accessing /dev/hda > instead of /dev/sda? There are generic drivers (ata_generic, pata_legacy). But they can be skipped on a

Re: [leaf-user] Problems booting LEAF 4 rc1 onSoekris Engineering net4501.

On 05/05/11 17:55, Graziano Brioschi wrote: > > I will put all these commands together in an initrd.lrp for net4501 and > I will share it if there is somebody who want to install new BuC40 on > Soekris Enginnering net4501. It's unneeded - it'll be enough to add pata_legacy in /etc/modules or add

Re: [leaf-user] Setting up nic bonding in Bering4-RC1

On 10/05/11 04:25, ads...@genis-x.com wrote: > Hi all, > > Soo I've scratched my head on this one for a couple of hours and can't seem > to figure out the right combination. > I'm using Bering-uClibc_4 RC1. > > I copied the bonding.ko into /lib/modules and following > http://sourceforge.net/apps/m

Re: [leaf-user] Floppy Disc Controller not being detected

20.05.2011 21:34, Mark Plowman пишет: > > So... > > Is the problem in the "automatically detecting" the floppy? Yes, it looks like kernel doesn't detect that system has PnP floppy controller - so it doesn't appear in /sys/devices and kernel module isn't loaded. > This old Pentium MMX box is old a

Re: [leaf-user] wd1100 watchdog

02.06.2011 19:41, Victor McAllister пишет: > I use several old Wrap and Soekris boxes running leaf firewalls. (Too > cheap to replace with ALIX!!!) Bering 4.0 has some great features and > implements easily on these boards. Thank you to the development team. > > One thing I did not find is a WD1100

Re: [leaf-user] accelsrv on Bering uClibc 4.0.1 isolinux vga

12.07.2011 23:29, Maurice Poisson Adriasola пишет: > After upgrading from BuC 3.1 I'm trying to setup pptpd service on BuC > 4.0.1 > > I´m probably having issues with unloaded modules and failure to load > ppp_mppe. Connection attempts fail after this log entry: Jul 12 > 16:13:23 firewall pptp[5387

Re: [leaf-user] Sanity Check

Hi. I use LEAF on our border routers. I didn't use 3.x in such conditions, so I can't tell about relative speed-up. Border for world channel is AMD Phenom II x6, with 2x i82576 cards - it shows up to 10% CPU load on ~ 500/500Mbit traffic, with firewall, some NAT (for some clients that haven't wh

Re: [leaf-user] Leaf on Soekris 4801

06.09.2011 01:14, Erich Titl пишет: > Hi Folks > > trying to get my router to a moderately current version I downloaded > Bering-uClibc_4.0.1_i486_syslinux_ser.tar.gz for my WRAP based board and > got bitten in initrd here > > [2.047660] Freeing unused kernel memory: 236k freed > LINUXRC: Berin

Re: [leaf-user] Bering 4.1 on WRAP: /dev/hda vs /dev/sda etc

21.10.2011 09:59, Eric House пишет: > After three or four years of pretty much ignoring LEAF because 3x was > *just working* on a couple of Soekris and WRAP boards I'm trying to > upgrade the latter to 4.1. And failing. The failure comes because > the packages described in leaf.cfg can't be loade

Re: [leaf-user] igb.ko with params and dca support

Hi. In BuC igb.ko is assembled separately from fresh sources, and it supports parameters. 21.12.2011 08:41, O_K пишет: > Hi! Dear developers of great distro!! > I suppose that B-uC will take more power as network-centric distro if > you include support for "params" for module igb.ko and its depen

Re: [leaf-user] Manually unpacking & mounting initrd.lrp

If you read changelog, you may notice that LEAF moved from initrd to initramfs, which is compressed CPIO archive. LEAF 3.x AFAIK hasn't cpio utility, so if you want to examine content, you should just extract it on generic Linux PC. 19.01.2012 16:13, groups, freeman пишет: > Hi, I'm testing wit

Re: [leaf-user] Kernel module via-velocity.ko for 4.2beta1

02.02.2012 18:36, KP Kirchdoerfer пишет: > Am 31.01.2012 02:35, schrieb Dillabough, Dave: >> Hi All, >> >> I'm trying to do some testing on the 4.2beta1 release but am missing a >> kernel module needed for 1 of my network interfaces. Any idea where I would >> find the via-velocity.ko module for t

Re: [leaf-user] 4.2beta1 - lovin it

08.02.2012 02:19, Buckeye пишет: > Been using the 4.2beta1 now for a couple of weeks and lovin it! LEAF is > a perfect example of why Linux is sexy! > > Prior to this, have had my own home-rolled Linux version with trimmed > down kernel, etc. But I lost it to lightning/power surge a few month > a

Re: [leaf-user] Bering 4.2-beta2 geode: module pcspkr is missing

pcspkr.ko is driver that adds /proc/pcspkr node, that allows you to play some tunes at boot. Beep doesn't use it. Maybe I'll port pcspkr on 2.6/3.x kernel when I'll have time. 12.02.2012 00:12, Northe, Juergen пишет: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Hello, > perhaps the modul

Re: [leaf-user] Load files from USB flash card

16.02.2012 18:38, leafuser12 пишет: > Hello to everyone!!! > > First at all, i'm new in this mailing list and I want to apologize for my > poor english :) > > I'm currently installing a new shoreline firewall with the new version of > Leaf Bering uClibc. I'm using isolinux image but i want to save

Re: [leaf-user] Change the order of eth0,1 etc

26.03.2012 07:03, ads...@genis-x.com написал: > Hi all, > > How do I change the order of NIC detection? or how can I force the system to > load e1000e BEFORE the igb driver? > > Bering-uClibc_4.2_i686_syslinux_vga > > Mar 26 14:54:14 firewall kernel: [4.565407] Copyright (c) 2007-2011 > Intel C

Re: [leaf-user] Change the order of eth0,1 etc

31.03.2012 00:27, groups, freeman написал: > On 12/03/26 05:11, Andrew wrote: >> 26.03.2012 07:03, ads...@genis-x.com написал: >>> How do I change the order of NIC detection? or how can I force the system to >>> load e1000e BEFORE the igb driver? >>> >

Re: [leaf-user] Backup Issue

It's a known issue. 'Terminated' message, that appears sometime, is caused by killing shellscript that prints rotating slash (shellscript should process signals, but for unknown reasons sometimes it doesn't). It appears after kernel upgrade to 2.6.x. Maybe killing after short delay should remov

Re: [leaf-user] Backup Issue

I added some changes into config package files (redirect of errors from ticker script, some additional delays) + some additional checkings. I didn't test it - I haven't time to rebuild all (I haven't built 4.x tree), because tomorrow I'll go from city for ~2 weeks, so it'll be good if somebody

Re: [leaf-user] Bering Leaf vs DD-WRT

07.07.2012 12:43, Jim Ford пишет: > For some years I ran Bering-Leaf on an old desktop PC. I eventually got > fed up with the noise, and also suspicious of the energy it used. More > recently I've been using a Buffalo router running DD-WRT, which seems to > work well. > > It seems to me that DD-WRT

Re: [leaf-user] LCD Module HD44780 - lcd4linx.lrp

Hi. As I remember, it has troubles with compilation under modern kernels, so it was commented out. Package still in tree, so if you want you can uncomment it's lines and try to make it working again. 24.08.2012 15:40, giorgio.ot...@virgilio.it пишет: > I would like to use the 20x4 LCD Module HD4

Re: [leaf-user] Kernel Module for Intel 82574IT for Bering-uclic 4.3

Hi. e1000e is already available, it's taken from kernel. It may be 'old' (not latest version) but it works OK. Just run hardware autodetection script. 04.09.2012 07:04, Jeff Ballif пишет: > Folks, > > I am trying to load Bering-uclibc 4.3 on my Soekris net6501. I have > everything on the USB boo

Re: [leaf-user] Kernel Module for Intel 82574IT for Bering-uclic 4.3

i486 imsge hasn't e1000e - because it's for rare i486 platforms w/o pci-e support. you should use i686 image instead. 07.09.2012 06:24, Jeff Ballif пишет: > Andrew, Yves, > Thanks you for the response. I must be a bit challenged. I just downloa

Re: [leaf-user] ./buildtool.pl build buildenv fails...

Hi. You clonned 5.x branch, which have some differences from 4.x If you want to build just toolchain (compiler + etc) - it's renamed from buildenv to toolchain in trunk. But you may just to build desired package - all will be built by dependencies. On 10/10/12 06:30, ads...@genis-x.com wrote: >

Re: [leaf-user] How do I specify which ARCH I want to build packages against?

Hi. maint branch (4.x) is only for x86 systems, and actually it is compiled for i486 cpu intruction set with optimisations for i686 - which is a bit slower (possible 5-10%) than native i686, but will be enough good executed on all target platforms. Or you can specify arch in make/MasterInclude.m

Re: [leaf-user] network card / motherboard problem

Hi. It looks like kernel driver is buggy/incompatible with this chip revision. Try to assemble 5.0 branch from git (master branch of repo), it has newer kernel. 24.10.2012 00:17, Marko пишет: > Hello, > > I just changed a motherboard and can no longer get the 4 port network card to > work. > > Wa

Re: [leaf-user] munin-node for Leaf Bering uClibc

Hi. Munin master is SNMP-capable, as I saw in doc - so at least basic monitoring can be enabled. Maybe in future somebody will add agent package for LEAF, or you can try to do this by yourself and send patch to somebody of developers. And as I saw in doc, munin is based on rrdtool - not best ch

Re: [leaf-user] Best place for own shell scripts

One of such places is /root... 25.11.2012 16:53, Markus Koelle пишет: > Hi, > > where in LEAF filesystem is the recommended place to store own perl and shell > scripts? The scripts should be saved with standard config backup mechanism. > > Cheers Markus > -

Re: [leaf-user] Hardware for LEAF-running WiFi router?

Hi. LEAF should run on any x86 PC. About WiFi - IMHO Atheros is one of best choices for Linux. 06.12.2012 19:30, Eric House пишет: > It's time to get a dedicated hackable WiFi router to replace the > consumer-grade stuff I keep having to replace (while the Soekris and > PCEngines boards running ou

Re: [leaf-user] New version

Hi. You can buy some kind of IDE flash (IDE DOM like Transcend one, or CF + chinese CF-IDE adapter, or SD + SD-IDE adapter - it's less preferred). Or you can try your luck with PLoP boot loader on floppy that will allow you to boot from USB. In any case, IMHO floppy isn't a best choice, it may f

Re: [leaf-user] Problem with leaf 4.3.3 installation on Pendrive

Hi. Try to add 'usb_wait=5' to kernel cmdline to increase delay before device mounting. 09.01.2013 20:34, KERNEL - Mauricio Améndola пишет: > Bering-uClibc 4.x > > Hello!!! > > I've installed the last version of Bering-uClibc (4.3.3) on a USB drive > and >

Re: [leaf-user] Problem with leaf 4.3.3 installation on Pendrive

11.01.2013 14:06, KERNEL - Mauricio Améndola пишет: > -- > Mauricio Améndola > Communications / Technical Department > KERNEL Consultores > Zabala 1327/402 , 11000, Montevideo, Uruguay > T+(598-2) 915 6563 / (598-2) 915 9336 > > El 10/01/2013 5:16, Andrew escribió: >&g

Re: [leaf-user] Problem with leaf 4.3.3 installation on Pendrive

11.01.2013 16:34, Erich Titl пишет: > Hi Mauricio > > Am 11.01.2013 13:04, schrieb KERNEL - Mauricio Améndola: >> Hi Erich, thanks for reply! >> My anwsers between lines! >> >> >> Well boot with grub is an option too, y used syslinux because is that it >> said in bering uClibc docs but i'll try wit

Re: [leaf-user] High CPU LEAF hardware recommendations

Hi. You can try i5 (or LGA1155 Xeon - it costs same price), or you can try AMD FX8320/8350 i5 has lesser cache/memory latency, but AMD has twice more cores (although each core is some slower than in i5). W/o encryption, on plain routing i5 should be faster, but for encryption AMD may be better.

Re: [leaf-user] Sun 501-5406 X1034A Quad 4-Port PCI-X Fast Ethernet Driver

It seems like this NIC is already supported by vanilla kernel. Try to enable CONFIG_HAPPYMEAL option and reassemble kernel. It isn't enabled by default in LEAF because NIC is enougn rare, and LEAF will become too fat if all NICs (and other hw like rare ATA controllers) will be enabled here. Als

Re: [leaf-user] Sun 501-5406 X1034A Quad 4-Port PCI-X Fast Ethernet Driver

24.03.2013 20:55, d пишет: > Hello Andrew, > > > Try to enable CONFIG_HAPPYMEAL option and reassemble kernel. > you mean, recompile/rebuild ? > I have experience with adding .o modules only, I did it with other NIC > cards. Yes. It isn't too hard. Just modify kernel c

Re: [leaf-user] BuC 5 on Proliant DL380R02

28.03.2013 19:29, Pär Johansson пишет: > Hi > I'm running a Proliant DL380R02 with Bring uClibc 3.1.1, now I want upgrade > to 5.0 b1. > The cciss driver for the Smart Array 5i is not available in the modules but I > have found the hpsa driver that could work with the option > "hpsa.hpsa_allow_

Re: [leaf-user] BuC 5 on Proliant DL380R02

ion syntax is described under "DMA Issues") > > dMb > > On 28 Mar 2013, at 20:51, Pär Johansson wrote: > >> Thanks, but i want to boot from the array. >> Would that really work? >> >> >> >> Best regards >> >> >> Pär Joha

Re: [leaf-user] BuC 5 on Proliant DL380R02

30.03.2013 15:47, Robert K Coffman Jr. -Info From Data Corp. пишет: >> P.S. IMHO it'll be much better if LEAF will be booted from IDE DOM (this >> server seems to have IDE CD-ROM - so it should have IDE connector on >> mobo). 10+ years old HDDs IMHO may die too suddenly... > I have quite a few old

Re: [leaf-user] can't boot Bering 5B1

Hi. What syslinux version do you use? BuC 5 requires 4.0 or higher. 3.x doesn't support multiple initrds 02.04.2013 00:26, Victor McAllister пишет: > On 4/1/2013 5:41 AM, KP Kirchdoerfer wrote: >> Am 01.04.2013 07:04, schrieb Victor McAllister: >>> on a PC Engines ALIX >>> >>> I am using syslinu

Re: [leaf-user] still can't get Bering 5 to boot

06.04.2013 06:11, Victor McAllister пишет: > I used syslinux 4 on compact flashes on a PC Engines ALIX geode version > for serial. > > It loads up until > > LINUXRC: Root: /dev/ram0 > LINUXRC: Looking for leaf.cfg... > LINUXRC: Generating default dirs... > LINUXRC: Generating /tmp & /var/log partit

Re: [leaf-user] Interest in support for 3G / 4G wireless Internet connectivity?

Hi. 16.06.2013 22:03, david M brooke пишет: > On Sun, 2013-06-16 at 15:52 +0200, KP Kirchdoerfer wrote: >> Hi David; >> >> Am 16.06.2013 11:49, schrieb david M brooke: >>> Hi, >>> >>> I am just wondering how much interest there would be in support for 3G >>> (or 4G, where available) wireless Inter

Re: [leaf-user] Interest in support for 3G / 4G wireless Internet connectivity?

22.06.2013 15:18, david M brooke пишет: > On Sat, 2013-06-22 at 00:20 +0200, KP Kirchdoerfer wrote: >> Hi; >> >> Am 16.06.2013 21:03, schrieb david M brooke: >>> I will certainly take of Documentation and Testing. If someone with an >>> up-to-date BuC 4.x development environment were to prepare a >

Re: [leaf-user] NIC enumeration in uclibc 5

Hi. On 05.08.2013 23:36, david M brooke wrote: > Hi Rob, > > Since your NICs use different drivers one option is to force the drivers to > load > in a particular order by listing them on the kernel command line. > > In *linux.cfg, specify something like the following: > APPEND reboot=bios KM

Re: [leaf-user] ez-ipupdate replacement?

Hi. Maybe we should migrate to ddclient or some other binary client? It's porting should be trivial. 29.08.2013 20:01, Erich Titl пишет: > Hi Bob > > at 29.08.2013 10:35, Bob von Knobloch wrote: > ... > >> Hi Juergen, >> >> I'm glad it worked for you. >> I have looked and see no need for your two

Re: [leaf-user] hdsupp

Hi. It seems like there is no enough free space into ram disk. You should just increase syst_size into leaf.cfg. 20.09.2013 16:03, Jim Munro пишет: > Hi all, > > > > It seems that loading hdsupp in leaf.cfg breaks selection f)Find and > load modules for hardware in the configuration menu. Not

Re: [leaf-user] Bering-uClibc 5.0.1 booting problem

Hi. Do you write MBR code to flash? 05.10.2013 23:17, Phil Faris пишет: > When I try to boot Bering-uClibc 5.0.1 on an Alix machine, I only get a > few lines of gibberish and then it hangs. The terminal I am using for > viewing works fine on other leaf systems. > > I created the system on the the

Re: [leaf-user] leaf mailing list hacked?

Hi. Just google on this e-mail. It's mentioned into marc.info archives, for ex http://marc.info/?l=leaf-user&m=104386045214349&w=2 IMHO some bot grabbed e-mails from mailing list... 17.04.2014 15:48, Michael пишет: > Just received this on my leaf only address, which has been clean for ~15 years >

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

17.09.2014 00:30, Timothy Wegner пишет: > Jurgen wrote: > >> have you upgraded your older 4801 box to version 5.1 with the geode image or >> also with the Bering-uClibc_5.1_x86_64_syslinux_vga.tar.gz > No, I have always used the 486 image > (Bering-uClibc_5.1_i486_syslinux_serial.tar.gz) with the

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

19.09.2014 15:04, Erich Titl пишет: > Hi > > at 19.09.2014 10:35, kp kirchdoerfer wrote: >> Am Donnerstag, 18. September 2014, 18:59:40 schrieb Timothy Wegner: >>> David wrote: >>> >>> > ... > >> Most probably it's the ehci-pci module (ehci-pci.ko.gz) which is missing. It >> is needed with the newe

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

20.09.2014 14:07, Erich Titl пишет: > Hi Andrew > > at 19.09.2014 20:39, Andrew wrote: >> 19.09.2014 15:04, Erich Titl пишет: >>> Hi >>> >>> at 19.09.2014 10:35, kp kirchdoerfer wrote: >>>> Am Donnerstag, 18. September 20

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

20.09.2014 22:16, Erich Titl пишет: > Hi Andrew > > at 20.09.2014 20:13, Andrew wrote: >> 20.09.2014 14:07, Erich Titl пишет: > ... >> Right. Modules aren't userland. So modules are splitted from userland >> initrd. > I would probably argue that initrd isn

Re: [leaf-user] Can anyone run Bering 5.1.x on Soekris net6501?

21.09.2014 21:56, Andrew пишет: > 20.09.2014 22:16, Erich Titl пишет: >> Hi Andrew >> >> at 20.09.2014 20:13, Andrew wrote: >>> 20.09.2014 14:07, Erich Titl пишет: >>> Also, almost all boot loaders suport multiple ramdisks. So I don't think >>>

Re: [leaf-user] Masquerade "helper" modules

06.10.2014 19:28, Art Mandler -- Skyrunner пишет: > In LEAF 4 these modules were included by default in the boot up config: > > # Masquerading 'helper' modules > # Don't remove anything here, unless you know what you are doing > # Other modules available in kernel/net/ipv4/netfilter > # UPD: now al

Re: [leaf-user] shorewall on 5.1.1

Hi. What says 'svi iptables restart'? 07.10.2014 13:54, Erich Titl ?: > Hi Folks > > something is amiss on my 5.1.1 installation, shorewall complains badly > about it > > Starting "Shorewall firewall": Compiling... > ERROR: Your kernel/iptables do not include state match support. No > versi

Re: [leaf-user] shorewall on 5.1.1

Hmm, strange. How about 'modprobe iptable_filter' ? Will it print some errors? 07.10.2014 14:46, Erich Titl ?????: > HI Andrew > > on 07.10.2014 13:25, Andrew wrote: >> Hi. >> What says 'svi iptables restart'? > SALT# svi iptables restart > Applyin

Re: [leaf-user] shorewall on 5.1.1

Hmm, strange. They should be loaded automatically as dependencies... I'll check fresh maint branch on the test platform today. 07.10.2014 17:02, Erich Titl пишет: > OK, the netfilter modules are not loaded, no surprise. > > I cannot use module auto detection, as there is not enough memory on > tha

Re: [leaf-user] shorewall on 5.1.1

I assembled commit next on 5.1.1, ce0a972..., all is working OK. Do you have enough free space on / ? Maybe depmod can't create/fill modules.dep? 07.10.2014 17:02, Erich Titl ?: > on 07.10.2014 15:02, Andrew wrote: >> Hmm, strange. How about 'modprobe iptable_filter&#x

Re: [leaf-user] Bering 5.1.2B1 486 syslinux serial

Hi. 13.10.2014 09:47, Victor McAllister пишет: > I tried this on an old WRAP board. Everything worked except the find > modules for hardware. > > lrcfg complained about unavailability of modules.dep even though this > file was located in /lib/modules/ and modules.tgz was available. It seems like t

Re: [leaf-user] Bering 5.1.2B1 486 syslinux serial

13.10.2014 19:48, Victor McAllister пишет: > On 10/13/2014 6:53 AM, kp kirchdoerfer wrote: >> Am Montag, 13. Oktober 2014, 15:33:26 schrieb Erich Titl: >>> Hi Andrew >>> >>> on 13.10.2014 10:32, Andrew wrote: >>>> Hi. >>>> >>>

Re: [leaf-user] Bering 5.1.2B1 486 syslinux serial

13.10.2014 21:43, Erich Titl пишет: > on 13.10.2014 19:52, Andrew wrote: >> 13.10.2014 19:48, Victor McAllister пишет: > ... >>> Victor >> You should increase rootfs size. AFAIR /tmp does nothing in modules >> detection; modules are unpacked into /lib/modules

Re: [leaf-user] USB Keyboard on boot up

Other variant - to boot with serial console and run module autoprobing. 17.10.2014 13:17, Art Mandler -- Skyrunner пишет: > Thanks, Simon. What I ended up doing was booting the USB drive on a > different computer with a PS/2 keyboard. That enabled me to set a root > password. I then booted it o

Re: [leaf-user] Multicore Processors

20.10.2014 13:01, Art Mandler -- Skyrunner пишет: > Can LEAF 5.1.1 make use of multi-core processors, or is it more efficient > to run it on the fastest single core I can find? I have a router that's > reaching capacity due to heavy use of pmacct traffic accounting, and I want > to upgrade the mot

Re: [leaf-user] using LEAF to prepare compact flash

Hi. What bin requires libiconv? 23.10.2014 20:16, Victor McAllister пишет: > I run several LEAF WRAP and ALIX firewalls, but compact flashes often do > not boot after they have been prepared with syslinux. > > I recently took some CF that failed to boot and found a way to make them > work. I used

Re: [leaf-user] Upgrading Many Firewalls

something like this: for i in `ls /mnt`; do wget ftp://.../$i; done mv init* linux modules.* /moddb /mnt apkg -u *.lrp # this update configs mv * /mnt and don't forget to update syslinux.cfg (add initmod.lrp) 23.10.2014 20:38, Robert K Coffman Jr. -Info From Data Corp. пишет: > I have a number o

Re: [leaf-user] Installation of uClibc 5.1.2-beta1

Hi. K6 is i686-compatible, so you can run i686 image (due to SMP it can eat some more RAM, but it should run faster). You should buy more RAM to use all features without OOM - SDRAM costs almost nothing. CF should work ok if there is ho hw incompatibilities between CF and chipset (I don't know h

Re: [leaf-user] Upgrading Many Firewalls

24.10.2014 15:39, Robert K Coffman Jr. -Info From Data Corp. пишет: > On 10/23/2014 1:45 PM, Andrew wrote: >> something like this: >> >> for i in `ls /mnt`; do wget ftp://.../$i; done >> mv init* linux modules.* /moddb /mnt >> apkg -u *.lrp # this update configs &

Re: [leaf-user] Installation of uClibc 5.1.2-beta1

25.10.2014 04:42, Patrick Andersson пишет: > Hello. > I couldn't boot with the i686-kernel. It was missing MMX. if I > remember correctly. > I will not buy more RAM since the motherboard can't take more than 32MB. > Hm, I mulled it with K6-2. What mobo do you have? Maybe you miss smth, and mobo su

Re: [leaf-user] Installation of uClibc 5.1.2-beta1

25.10.2014 04:42, Patrick Andersson пишет: > Yes. The attached file is the printout from the serial connection. > How do I readjust the memory usage during the install process? > What does "I will not be able to use the find and extract modules feature > at install" mean? This means module autoprob

Re: [leaf-user] Busybox sendmail

Hi. Piping via | (cat file | sendmail ...) also doesn't work? 10.11.2014 01:13, Erich Titl пишет: > Hi Folks > > has anyone recently had success in piping data into BB sendmail, e.g. > the mail cripple in LEAF? > > I tried the following > > sendmail -f a...@think.ch -S mailserver.think.ch i...@th

Re: [leaf-user] Busybox sendmail

> Hi Andrew > > at 11.11.2014 09:14, Andrew wrote: >> IMHO you should open ticket on busybox trac... > Yes, looks like it, have you been able to reproduce it? > > Thanks > > Erich > > > > --

Re: [leaf-user] Busybox sendmail

14.11.2014 13:06, Erich Titl пишет: > Hi > > at 11.11.2014 13:37, Andrew wrote: >> Hi. >> I've reproduced it. Actually sendmail works as expected. Yue can see >> paswd file in raw view - mailserver treats passwd lines as header lines >> because they have sa

Re: [leaf-user] General Protection Fault in iptables.

Maybe we should include all modules required by 'standard' software (that is enabled in typical installation) to moddb? Classifiers weights tens of kb or even less... 25.11.2014 15:39, kp kirchdoerfer пишет: > Hi Stirling; > > see shorewall FAQ 67 > http://www.shorewall.net/FAQ.htm#TC > > >From th

Re: [leaf-user] Small shorewall issue in 5.1.3-rc1

Hi. Practical purpose for 'background' option - this is: 1) dhcpcd will not die if no carrier on WAN during boot 2) boot speedup when something is wrong in network (no lease obtained). IMHO we need to do something with shorewall - rules should be updated (at least partially) when new lease is obt

Re: [leaf-user] Leaf Bering Uclibc version 5.x : pptpd not working

Hi. Try to use accel-pptp (kernel-mode pptp server) or even accel-ppp (powerful pptp/pppoe/l2tp daemon like bsd's mpd) 28.01.2015 20:49, Ecran Total пишет: > Hi and thank you for this good project, > > Sorry for my bad english J > > > > I'm leaf user's since version 2.x. on "Openbrick" and "

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

Hi. Try to add usb_wait=3 (or more) to kernel cmdline. 25.02.2015 19:28, n22e113 пишет: > Huston! We have a problem with: > Bering-uClibc_5.1.{1,2}_geode_syslinux_serial115200.tar.gz > Using alix2d3 with v5.1.{1,2} had resulted intermittent boots. Once in > awhile, it cannot read leaf.cfg and rep

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

ver is >>> different and might need some tweaking. I am using grub to boot my >>> boxes, but the driver parameters should behave the same >>> >> Hello, et and Andrew, >> Adding 'usb_wait=2' works so far for the last two/three hours. I am also >

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

usb_wait - delay after modules loading for usb devices detection. 26.02.2015 18:59, Erich Titl пишет: > Hi Andrew > > Am 26.02.2015 um 11:33 schrieb Andrew: >> Some boards detects IDE/SATA devices with delay; increased usb_wait >> fixes this. > But this is probably a side

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

This isn't side effect, this is just confusing variable name :) 27.02.2015 00:38, Erich Titl пишет: > Am 26.02.2015 um 18:59 schrieb Andrew: >> usb_wait - delay after modules loading for usb devices detection. > like I assumed, side effect, he is booting f

Re: [leaf-user] alix2d3 + v5.1.{1,2} Intermittent Boots

-au, -ap options of busybox sendmail. 28.02.2015 15:16, Robert K Coffman Jr. -Info From Data Corp. пишет: > Is there a way to send email (log file) from Leaf while using an SMTP > server that requires authentication? > > - Bob > > > -

Re: [leaf-user] temporarily allowing connections

Hi. You can try to use iptables recent module, but i slightly different way: add source ips to list for knocking to one port, and grant access for target http/ssh port corresponding to this list records. Something like http://www.snowman.net/projects/ipt_recent/ 3rd example. 06.03.2015 11:26, E

Re: [leaf-user] Leaf 5.2 + alix2d3 Missing ext[23].ko.gz

Hi. ext4 module should support ext2/ext3 fs. 28.09.2015 04:05, n22e113 пишет: > Hi, Make sure to watch the Blood moon! > Thanks Leaf for v5.2. However, modules ext2 & ext3 are missing in > modules.tgz? Is this intentional? The reason I am asking is that I am still > using a CF card to store Leaf

Re: [leaf-user] keepalived cpu hog

Hi. Can you tell which modules are loaded bykeepalived? 20.10.2015 22:33, dino muzic пишет: > hi, > > my configuration consists in two boxes running vrrp (keepalived). > the issue was a continuous keepalived process crashing and restarting > with the following log messages : > > > deamon.log: > O

Re: [leaf-user] Unable to upgrade from LEAF Bering-uClibc 5.2 to 5.2.1

Hi. Please check modules.sqfs and moddb.lrp date on storage. It seems like moddb.lrp isn't updated. If modules.sqfs is present on storage - just delete moddb.lrp 18.11.2015 21:37, Timothy Wegner пишет: > Here are some clues. > > Boot messages: > [ 31.899909] softdog: disagrees about version of

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

16.01.2016 16:48, Sven Kirmess пишет: > I don't succeed booting Bering on my APU2B4. First I tried the Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz > image and got the following error message: > > This kernel requires the following features not present on

Re: [leaf-user] Problems booting Bering-uClibc on APU2B4

### ## > --#-- > - > Loading /syslinux/linux... Loading /syslinux/linux... okok > > Loading /initrd.lrp...Loading /initrd.lrp...okok > > Loading /initmod.lrp...Loading /initmod.lrp...okok > > > > >

  1   2   3   >