RE: lingo-l Flash Bitmap Problem

Sorry abt missing the version info: I'm using d8.5 and FlashMX (published for Flash5). Thanks and Regards, Anand Ravi -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jeremy Aker Sent: Friday, October 01, 2004 9:40 PM To: [EMAIL PROTECTED] Subject: Re

lingo-l Flash Bitmap Problem

was wondering if someone on this list can point me in the right direction. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED

RE: lingo-l RE: on stopMovie problem in projector

The easiest approach is to call a custom handler when the close button is clicked on the title bar. This handler can then take care of Saving and quitting or just quit without saving. Hope this helps. Regards, Anand Ravi -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

lingo-l Projector on NT Problem

the projector is launched, a Dr. Watson error is thrown. (This does not happen at our end). Any thoughts will be highly appreciated. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list

RE: lingo-l Projector on NT Problem

fine. Its only the projector which is causing the error. I was wondering if anybody had a similar experience. This projector works fine on 95, 98, XP and 2K and NT at my end! Thanks and Regards, Anand Ravi -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cath

lingo-l Video Masking

it may be possible to add a copyright layer when producing the video and trying to mask the layer in the wmv at run-time. Any thoughts on this will be highly appreciated. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com

lingo-l Webbrowser Control in DCR

Hi List, I'm trying to display MathML text within director. I've succeeded in doing this by installing the requirted browser extensions and then using the MS web browser control for display. All works fine in the Projector. Is there anyway I can publish a dcr of this projector? Does anyone know

RE: lingo-l Converting to Japanese

Hi Kerry... Here's my technique: I author on either win2k or xp with japanese locale installed. I have with me 3 windows fonts off which i have so far only 1 (u're right - they are not unicode). To view the CD/DVD the target system also needs to be configured with the japanese locale... so far

RE: lingo-l Converting to Japanese

Hi! I've been developing CD-ROMs for a Japanese client for over a year now...i use D8.5 and have embedded the appropriate japanese fonts that i require...my target is only windows systems though.. content is in XML format...i aprse that in flash and pass the html text to d8.5 which then renders

RE: lingo-l PostNetTest Issue

http://wkar.macq.com/beignprocess.asp is not reachable at the moment. if that's for another reason, try opening the url directly in a browser and check the result (you could make your asp-page return something like 1 or OK) Thanks for the help. Solved it finally. There was a proxy server

RE: lingo-l How to refer frame number in one of the scenes in an FLA from Director

I am not sure if you can directly address scenes. My suggestion in this case would be to set 2 variables in flash and call flash function to make the actual switch. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of biju george Sent: Tuesday, January 13,

lingo-l PostNetTest Issue

will be highly appreciated. I am developing in D8.5. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L

RE: lingo-l Editable

, that field doesn't became editable. I have tried to use updateStage more than once but is the same story. Does anyone have an idea what is going on?? snip You might have to set the keyboard focus to the sprite. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go

RE: lingo-l Any idea?

tests to see which is worse). snip Just a thought..the problems of speed can be minimized if you go down the multiple movieclips route Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages

RE: lingo-l Re: QT issues

Check the path and the Xtras being distributed! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, December 01, 2003 5:48 AM To: [EMAIL PROTECTED] Subject: lingo-l Re: QT issues I am working on a interactive project and I

RE: lingo-l Any idea?

You might want to explore integrating flash content within Director for this. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sasa Sent: Sunday, November 30, 2003 5:21 PM To: [EMAIL PROTECTED] Subject: lingo-l Any idea? I want to make one CD ROM

RE: lingo-l Sound recognition and comparison

Hi Mindy, Going by my experience with the masters, in most cases, the problem can be broken down to something quite straight forward. TAG v1 that appears at the very end of the file is a 128byte structure. The 127th byte refers to Genre. Genre is used to broadly describe the kind of music

RE: lingo-l RE: Sound recognition and comparison

snip My professor said comparing songs by genre tags is not an option. His expectation for the scope of this project is basically the sound equivalent of image recognition in director. snip The only other parallel I can think of is the audio analysis tool that I worked on about 2 years back.

RE: lingo-l DVD Creation

format to use. Yes I was referring to the DVD drive on the computer. To clarify more on what I have in mind - the application that I am developing is fundamentally a search engine. I'm planning to use a DVD only because the data size is really large 1.5GB+. Regards, Anand Ravi [To remove

RE: lingo-l PDF CLASS for creating PDF with lingo

Amazing effort! Much appreciated. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Valentin Schmidt Sent: Tuesday, November 25, 2003 9:20 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: lingo-l PDF CLASS for creating PDF with lingo hi list, inspired

Re: lingo-l HTML and email

high...eg sending bulk mail, etc.. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping

Re: lingo-l 'Failure while compositing bitmap member' errormessage

Has anyone ever gotten this error message: 'Internal error: Unexpected failure while compositing bitmap member 7 of PLAYER-CAST 1' The technote (http://www.macromedia.com/support/director/ts/documents/sw_error.htm) says it's the result of a sound.playFile command. But when this

Re: lingo-l ActiveX Control

mind recreating the wheel (I've got a recreated boat full of recreated wheels), but if I don't have to... The best option would be create ur own ActiveX control. The datagrid control should be of use to you. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go

Re: lingo-l Antispam UOL?

Yes. - Original Message - From: grimmwerks [EMAIL PROTECTED] To: Lingo [EMAIL PROTECTED] Sent: Wednesday, October 29, 2003 9:29 AM Subject: lingo-l Antispam UOL? Is anyone else getting those annoying spanish 'click here to make sure this email isn't spam' messages for posting to

Re: lingo-l external text files in flash and then director.

able to embed flash 5 files in D8. These swf's in turn load external text files. Please check if the location of the text files is correct. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list

Re: lingo-l Protect content outside Director

Another thought is to use BuddyAPI to use xor based encryption/decryption...u can distribute the encrypted media on the CD and decrypt it on the fly in a temporary location... - Original Message - From: Valentin Schmidt [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, October 23,

Re: lingo-l dcr security

My thoughts exactlyam planning to increase security checking if the dcr is playing from a particular url...if not I will delete the contents of the castlib.need to figure out how best this can be implemented though. Thanks and Regards, Anand Ravi - Original Message - From: Daniel

Re: lingo-l dcr security

very sensitive data and data security will be a critical concern... I'm wondering if Macromedia should come up with a security extension for their products Thanks and Regards, Anand Ravi - Original Message - From: Thomas Higgins [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday

lingo-l dcr security

will be highly appreciated. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping

Re: lingo-l Autorun

for a similar file for Mac. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming

Re: lingo-l Acrobat installer.

I remember that there was a form that needs to be filled in before distributing Acrobat Reader. But that's about the only things Adobe wld require. Thanks and Regards, Anand Ravi - Original Message - From: Howdy-Tzi [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, September 07, 2003

Re: lingo-l DIR -- FLASH comm problem...

they are very generic. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming

Re: lingo-l playing wmv files

Thanks Mathew and Valentin for your thoughts...I am now experimenting with the vplayer sprite xtra from penworks Thanks and Regards, Anand Ravi - Original Message - From: Mathew Ray [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, August 28, 2003 8:49 PM Subject: RE: lingo-l

lingo-l playing wmv files

position, the entire video freezes. 2. Streaming Media Xtra from Tabuleiro - This xtra seems to be good except that the audio breaks. Any thoughts will be highly appreciated. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http

Re: lingo-l deleting from a text file with fileIO

Original Message - From: Daniel Nelson [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, August 27, 2003 10:33 PM Subject: Re: lingo-l deleting from a text file with fileIO Oops. Thanks for correcting me. Regards, Daniel Kerry Thompson wrote: Don't delete and create

Re: lingo-l DIR -- FLASH comm problem...

. This may not be the best soln. but it worked for me and my client was happy with the performance. Hope this helps. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL

Re: lingo-l MIAW image rects

Hi! I am not sure if this will work - but u might want to consider cropping the image after taking the screen shot. Thanks and Regards, Anand Ravi - Original Message - From: Bruce Mitchener [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, August 22, 2003 2:42 AM Subject: lingo-l

Re: lingo-l Active Desktop

command and pass the action required as a string. In the browser, you can parse the string and carry out the appropriate action. If you are using a Windows Projector, then it might be simpler to embed an ActiveX control in the movie to work with the dlls. Regards, Anand Ravi [To remove yourself

Re: lingo-l Fooling Windows

Is there a way in Director, if the user has NOT interacted with my CD-ROM program to create some type of an event, so Windows does not go into screensaver mode? You might want to take a look at BuddiAPI. [To remove yourself from this list, or to change to digest mode, go to

Re: lingo-l how to comunicate serial port

Hi all, I am working on smart card. I wanted to know how to comunicate thru serial port using Lingo? There is a serial port xtra that might help you. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post

Re: lingo-l search pdf files

fully understand that this would involve duplicating the content 100%, but I don't see any other way. Any thoughts will be really helpful. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages

Re: lingo-l SCORM and Shockwave files

docs at www.adlnet.org . The IMS website also has some good information. Check for the level of support provided by the LMS for scorm. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list

Re: lingo-l Anyone know a good Flash list? - like lingo-L! and a Flash question...

with Flash, I don't think this is possible - though u might find answers on the flash list. The way I see Flash is that it was never meant to be used for powerful programmingbut its kind of evolved into one Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go

lingo-l search pdf files

. Any pointers will be highly appreciated. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L

Re: lingo-l when/why is pupperSprite necessary?

bet is that if you try the swapping with a blank bitmap it will work. (This might be a little clumsy though! But u can avoid using puppetsprite.) Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages

Re: lingo-l active x

Also does any one know where on microsofts site ( or anywhere else for that matter) there is documentataion for the web browser active x control. Lee Blinco Check out the MSDN section. [To remove yourself from this list, or to change to digest mode, go to

Re: lingo-l when/why is pupperSprite necessary?

).member = member(MyText, Texts) sprite(1).member = member(MyBitmap, Bitmaps) updateStage My bet is that this should work. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL

Re: lingo-l Dictionary Search - conceptual/approach issues

. Hope this helps. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo

Re: lingo-l Filename, path and other

Everytime I rename the root folder (where the two other folders are) or change from mac to pc, the link to the images stops working. Use relative paths. That should solve your problem. Check out @ or the moviepath. Regards, Anand Ravi [To remove yourself from this list, or to change

Re: lingo-l MIAW and script error

of the window to the main movie as a parameter and invoke a custom handler to close miaw windows. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email

Re: lingo-l loop every hour

Hi list, How can I implement an script to run every hour. I need to download (downloadnetthing) some files and this files are updated in this interval. The download is not a problem, but I can't figure out a way to do the loop, and most important without slowing down the entire app. Use

Re: lingo-l MIAW and script error

The issue, I think, is with the closer function. Close the miaw from the main window/movie. When the close button is clicked pass the name of the window to the main movie as a parameter and invoke a custom handler to close miaw windows. If I understand you right, that won't work

Re: lingo-l RE:Re: Design Help

this sorta content! Huge volumes of this sorta content! :) Thanks and Regards, Anand Ravi - Original Message - From: grimmwerks [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, July 17, 2003 12:04 PM Subject: Re: lingo-l RE:Re: Design Help Yeah that'd be great for us macheads

Re: lingo-l Error I haven't seen before

process? Just a single bit that forces that error. I faced a similar problem recently - and couldn't figure out what the problem was. So I ended up resending the Master - just refixed the CD-R and created the iso image once again. That kinda solved all issues. Best Regards, Anand Ravi [To remove

lingo-l Design Help

. until 3 weeks of market release - Greek / unicode characters to be supported Am currently using D 8.5. Am thinking of upgrading to MX. Can D be used for this? Will appreciate any thoughts from you all. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode

Re: lingo-l Strange strings?

put a+1 -- 59472945 put A+1 -- 4791765 Is it shows the ASCII summed values no way that can be ascii values (otherwise u should have got 98 or 66). my best bet is that it has something to with memory addresses. Regards, Anand Ravi [To remove yourself from this list

Re: lingo-l Event Order

Thanks a lot for this info Kerry. I am sure this come in useful for a lot of us. :) Here's something that may be useful: the definitive event order. First the results: -- PrepareMovie -- New frame -- Begin frame -- New Sprite 1 -- Begin Sprite 1 -- New Sprite 2 -- Begin Sprite 2 --

Re: lingo-l browser embeded inside director

, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]

Re: lingo-l phantom scripts?

Hi! There could be another instance of the script in one of the casts. Try to search for it. This has happened previouly to me!! Regards, Anand Ravi - Original Message - From: Tab Julius [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, June 27, 2003 5:11 PM

Re: lingo-l browser embeded inside director

Hi! Assuming that you have placed the web browser control on sprite 5, Call 'navigate(sprite 5, www.google.com)' or whichever url you want to display. Regards, Anand Ravi - Original Message - From: Prasis [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, June 26, 2003 3:28 PM

Re: lingo-l Multiuser Xtra and databases

A quick question: How will Director know when perl has completed execution? Background: On click of a button, I will execute a perl exe (win32) to manipulate an XML file and once it is done, I display the XML file within Director. How do you call this perl exe in Dirctor?

Re: lingo-l Multiuser Xtra and databases

Hello Evan, The content displayed in the CD also needs to be ported to the web with minimal effort, which is why I figured using perl might have an edge over staying navite to director. Best Regards, Anand Ravi Anand Ravi wrote: is that really the case? if the solution involves ASP, you're

Re: lingo-l Multiuser Xtra and databases

Hi! I remember reading about a java xtra. You might want to check it out. Best Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL

Re: lingo-l browser cache

Hi! Set content to expire immediately. I've done it in IIS. Best Regards, Anand Ravi - Original Message - From: Jussi Jokinen [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, June 18, 2003 7:07 PM Subject: lingo-l browser cache Hi! This is quite a general question

Re: lingo-l browser cache

Though I've not used this method, you could append a unique parameter to the url every time u access the url. Easiest is to use date/time combinations. This should fool the browser to load from the server everytime. Of course - the parameter will not be used at all. Best Regards, Anand Ravi

Re: lingo-l Multiuser Xtra and databases

Director. Any pointers will be highly appreciated. Best Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L

Re: lingo-l tell when importFileInto is done?

not tried it with graphic files. My hunch is that it should work. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L

lingo-l Image manipulation

. Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo

Re: lingo-l Image manipulation

Sorry folks! Managed to do it! :) Thanks and Regards, Anand Ravi - Original Message - From: Anand Ravi [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, June 16, 2003 9:17 PM Subject: lingo-l Image manipulation Hi List, I have a number of images for which I am writing custom

Re: lingo-l Selectable Text

On Friday, Jun 13, 2003, at 09:35 America/Chicago, Anand Ravi wrote: For text, I need to enable text selection for a custom copy operation - anything copied should copy with the copyright line. The default text cast member properties do not seem to have this functionality - which

lingo-l RM's CC2 and CC3 Networks

this? Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]

Re: lingo-l MIAW(move ball from miaw)

Hi! Use the tell for this. tell the stage -- your code end tell Thanks and Regards, Anand Ravi - Original Message - From: nitin sharma [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, June 14, 2003 4:41 PM Subject: lingo-l MIAW(move ball from miaw) hi all can anybody

lingo-l Selectable Text

parser does not seem to be really sophesticated. Has there been any enhancements to the parser in D MX? Thanks and Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL

Re: lingo-l Cross Platform Equalizer

for best performance. Hope this is of some use! Thanks and Regards, Anand Ravi - Original Message - From: Joshua Race [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, June 13, 2003 7:39 PM Subject: lingo-l Cross Platform Equalizer I have a cross platform CD which has a bunch of swa's

Re: lingo-l text

Hi! You can do this using the scrollbyline command for this. member(myText).scrollbyline(5) -- will scroll down by 5 lines Regards, Anand Ravi - Original Message - From: Liz [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, June 12, 2003 8:23 PM Subject: lingo-l text Hi, I

Re: lingo-l French, German, Greek text in the same field.

this approach. My bet is that it should work. Regards, Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning

Re: lingo-l from variable to script

Hi! The easiest thing would be to traverse the list line by line and add the lines to the text member. This way you can format the contents anyway you want. Hope this helps. Regards, Anand Ravi - Original Message - From: Jussi Jokinen [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent

Re: lingo-l French, German, Greek text in the same field.

Hi! The easiest way to do this is to embed the fonts and copy paste the text from word into the Director Text cast member. You will need to reset the font to the embedded font. It works fineI used this mtd to package content in japanese as well as local indian languages. Regards, Anand Ravi

Re: lingo-l French, German, Greek text in the same field.

could use something like Fontographer to create your own. Hope this helps. Cordially, Kerry Thompson Another way to accomplish this is to embed the text in flash and import the flash movies. Flash supports unicode text. I am not sure if Flash 5 supports unicode though. Regards, Anand Ravi

Re: lingo-l Including Flash asset

wondering if anyone else experienced this? Luke Hi Luke, I remember having a similar experience. It was quite sometime back though. Anand Ravi [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list

Re: lingo-l Getting rid of hypertext underline

Hi! You need to deselect the use hypertext styles cast member property. You can then use a custom behaviour to capture the hyperlink clicked event. Thanks and Regards, Anand Ravi - Original Message - From: Andrew Dempsey [EMAIL PROTECTED] To: [EMAIL PROTECTED] Com [EMAIL PROTECTED] Sent

Re: Re: lingo-l Getting rid of hypertext underline

(pSpriteNum).cursor=[member(cstBmpHand),member(cstBmpHandMask)] end if end if end You will need to keep track of the previous state. Otherwise the cursor will keep changing between the hand cursor and normal one. The result was quite satisfactory. Thanks and Regards, Anand Ravi

Re: lingo-l progress bar with goToNetMovie

Hi! To create a progress bar you need to use the preloadnetthing command. Then, on exitframe you can get the netstatus and display the progress bar. When u reach 100%, jump to the movie. Thanks and Regards, Anand Ravi - Original Message - From: Jussi Jokinen [EMAIL PROTECTED] To: [EMAIL

Re: lingo-l Accessing a Fuction from a MIAW

Hi! If you are targetting the main projector window, then you will need to specify the target beforee making the call. on MouseUp me tell the stage OpenObject end tell end Regards, Anand Ravi - Original Message - From: Matt Wells [EMAIL PROTECTED] To: [EMAIL PROTECTED