Sorry, as advised by Paul Rubin I am now addressing the list! ;-)
Michael
Would this perhaps help as it does in my linguistic and other documents?
Michael Berger
%instruction to LATEX not to run lines into the margins
%Thanks to Jürgen Spitzmüller for this piece of fine advice
\tolerance
Sorry, as advised by Paul Rubin I am now addressing the list ;-)
Michael Berger
Forwarded Message
Subject:Re: URL inserts that overfill lines
Date: Fri, 1 Nov 2019 14:43:33 +0100
From: Michael Berger
To: parubi...@gmail.com
Would this perhaps help
Sorry Jürgen for addressing you this way.
I reported this to the LyX users list quite some time ago but got no
response at all. Nor could I find some help on Miede's website. Any hint
or advice from you?
Regards
Michael Berger
Dear friends of LyX,
having faced quite a number of heavy
rch. I still can enter Insert > Marginal Note in the Lyx
master and all child documents but I see no marginal notes at all in the
PDF output. That is nothing really essential in my case but it might be
well for other people.
Best and thanks,
Michael Berger
their good reasons?!
Thank you once more for trying to help and cheers!
Michael Berger
' and
'RoyalBlue' / 'Black' / 'CTlink'
Description: \definecolor{CTurl}{named}{Maroon}
PDF output is possible but not usable because somewhat incomplete and
without colors.
I have been trying now for days and eventually gave up.
Can somebody please, give some good advice?
Michael Berger
while 0,6199... would be correct.
Not a real problem for somewhat experienced users of KMM and I could
live on with it, just not so nice ;-)
Thanks for this great program,
Michael Berger
How about this one!?
Michael Berger
On 02.01.19 20:10, Léo Rebetez wrote:
Hi,
I'm new on lyx, I'll use it mainly for publishing books. I'm searching
how to break a too long url like this one:
http://www.guardian.co.ukuk2012jun12policestopandsearchblackpeople
I wrote it in my preamble
On 12/28/18 1:05 PM, Jürgen Spitzmüller wrote:
Am Freitag, den 28.12.2018, 12:45 +0100 schrieb Michael Berger:
sorry for not making myself clear enough!
My Classicthesis Document has five child documents. There is only
one tree we are talking about which is in child 2 but it cannot
On 12/27/18 8:56 AM, Jürgen Spitzmüller wrote:
Am Mittwoch, den 26.12.2018, 18:00 +0100 schrieb Michael Berger:
Yes Jürgen, the linguistics module is activated.
In the CHILD document?
If it wasn't the
document would not convert to PDF;
Now you're talking about the master document, right
On 12/26/18 5:14 PM, Jürgen Spitzmüller wrote:
Am Mittwoch, den 26.12.2018, 15:57 +0100 schrieb Michael Berger:
Dear Jürgen, dear list,
I am using Miede's classicthesis in Lyx 2.3.0.
Thanks for implementing this fantastic feature to expand linguistic
trees directly in LyX without the need
and a Happy and Prosperous New Year to all of you!
Michael Berger
Hello Baris,
I see in my return copy that the layout file classicthesis cannot be
found and the LyX Document cannot be opened. But I have no idea what to
do now!? Just want to mention that I tested the LyX file I was about to
send and it worked.
Michael
On 12/11/18 12:35 PM, Michael Berger
for!
Thanks and regards,
Michael Berger
On 12/10/18 8:25 PM, Baris Erkus wrote:
On 12/8/2018 10:03 PM, Michael Berger wrote:
Dear all,
openSUSE Leap 15
Mageia 6
Miede's classicthesis-LyX-v4.5
Page margins set:
left 27,5 mm
right 41,0 mm
text width 141,5 mm
And this is exactly what I see
On 12/10/18 10:26 AM, Kornel Benko wrote:
Am Montag, 10. Dezember 2018 10:12:05 CET schrieb Michael Berger
:
Hello Baris,
thanks for your reply and proposition. Unfortunately I cannot find ways
to scale my document. Furthermore, if my document is scaled then the PDF
preview should also
Best and thanks
Michael Berger
On 12/8/18 8:07 PM, Baris Erkus wrote:
On 12/8/2018 10:03 PM, Michael Berger wrote:
Dear all,
openSUSE Leap 15
Mageia 6
Miede's classicthesis-LyX-v4.5
Page margins set:
left 27,5 mm
right 41,0 mm
text width 141,5 mm
And this is exactly what I see in PDF p
!?
Thanks and best
Michael Berger
.
However, the resulting printout looks different:
left 31,0 mm
right 45,5 mm
text width 133,3 mm
I tried different types of PDF converters but get same wrong results.
And two entirely different printers produce same wrong printouts.
Can somebody help solving this mystery!?
Best
Michael Berger
different types of PDF converters but get same wrong results.
And two entirely different printers produce same wrong printouts.
Can somebody help solving this mystery!?
Best
Michael Berger
Do you think this list is the right place for your continuing dispute?
Michael Berger
On 11/4/18 10:18 AM, Pol wrote:
Daniel Kian Mc Kiernan (the best Daniel of the bunch) wrote:
On 11/3/18 5:46 AM, paolo m. wrote:
I am not able to 'learn' how not to make typos. Do you?
I learn not to make
Dear Lyxers,
Using Mageia 6 KDE and trying to get familiar with the p7zip compression
program.
I find p7zip, version 16.02 installed, just this single file, no GUI.
This program is supposed to work from within Dolphin. But I cannot find
the faintest hint how to use it because there is no menu
Sorry, not clear to me what you mean. Please, rephrase.
Michael
On 01.06.2018 09:24, Wolfgang Engelmann wrote:
How can I get in German references und instead of and in the cited
references? I am using bibtex.
Wolfgang
On 26.05.2018 10:29, Jürgen Spitzmüller wrote:
Am Samstag, den 26.05.2018, 09:22 +0200 schrieb Michael Berger:
Thanks Jürgen,
I removed all child documents and stripped the master file to a
minimum.
I left two of the original glosses, added a single line of text and
a
new gloss.
The same type
On 23.05.2018 18:36, Jürgen Spitzmüller wrote:
Am Mittwoch, den 23.05.2018, 13:52 +0200 schrieb Michael Berger:
Hello dear Lyxers,
after upgrading LyX to version 2.2.3 opening and editing
(linguistic)
papers made with earlier versions of LyX does work.
Conversion to PDF of each single child
Hello dear Lyxers,
after upgrading LyX to version 2.2.3 opening and editing (linguistic)
papers made with earlier versions of LyX does work.
Conversion to PDF of each single child document works as well. But
trying to generate a PDF from the master document results in an endless
loop.
Any
Hello Thomas,
I am very sorry for my below repeated premature statement re KMM 5.0.0
After digging deeper I must now advise Mageia 6 users to be extremely
cautious when trying KMM 5.0.0.
I continue using it for my everyday work while avoiding the dangerous
parts/commands of it.
Thomas, as I
Thanks Guenter for this fine professional comment,
Michael Berger
On 25.04.2018 09:24, Guenter Milde wrote:
Dear Dr. Lisse,
On 2018-04-24, Dr Eberhard Lisse wrote:
T-Bird sends to lyx-users@lists.lyx.org and posts to
gmane.editors.lyx.general (which may, or may not, have an identical
.
As much as I enjoy a metadiscussion I have a duplicate remover extension
in my T-Bird, which works quite well.
greetings, el
On 23/04/2018 15:59, Michael Berger wrote:
No Wolfgang, you are not. It is the sender's responsibility to correct
this.
Michael
On 23.04.2018 15:01, Wolfgang Engelmann
No Wolfgang, you are not. It is the sender's responsibility to correct this.
Michael
On 23.04.2018 15:01, Wolfgang Engelmann wrote:
Am 23.04.2018 um 09:35 schrieb Dr Eberhard Lisse:
On 2018-04-21 17:31 , Scott Kostyshak wrote:
I see. In 2.3.1, this will be a little better thanks to this
Hello Aaron,
I feel this is your first document produced with LyX and thus would
recommend you to first of all try a template that is not too complicated
yet *providing a rich set of predefined standards* (which I feel you may
need), e. g. KOMA-Script Article or KOMA.Script Report.
File >
Hello Scott,
the message under #1 sounds clear and unambiguously to.
Michael
On 01.04.2018 15:05, V K wrote:
Message is quite clear, but "If you do not understand this message,
you should choose "Continue"." says too little and indirectly states,
that user is dumb. I've read previous thread
Wolfgang,
this is how you may put your path to 'lyxpipe'
Michael
On 28.03.2018 19:22, Richard Kimberly Heck wrote:
On 03/28/2018 12:07 PM, Wolfgang Engelmann wrote:
Am 28.03.2018 um 17:18 schrieb Richard Kimberly Heck:
On 03/28/2018 08:12 AM, Wolfgang Engelmann wrote:
I can't find
tics with so many great enhancements.
Michael
On 12.03.2018 18:14, Jürgen Spitzmüller wrote:
2018-03-12 18:00 GMT+01:00 Richard Heck:
On 03/12/2018 12:39 PM, Michael Berger wrote:
Thanks Richard,
my son is using Windows 10, not Lyx. But I learned from Kornel
and Uwe that his
Well Kornel and Richard,
that makes it very clear. Sorry for the noise and my unprofessional
questioning.
Michael
On 12.03.2018 17:46, Kornel Benko wrote:
Am Montag, 12. März 2018 17:39:33 CET schrieb Michael Berger
<id...@online.de>:
Thanks Richard,
my son is using Windows 10, n
Thanks Richard,
my son is using Windows 10, not Lyx. But I learned from Kornel and Uwe
that his file should nevertheless compile if opened in LyX. Did I get
something wrong here?:-(
Michael
On 12.03.2018 16:54, Richard Heck wrote:
On 03/12/2018 08:12 AM, Michael Berger wrote:
Hello Uwe
On 11.03.2018 17:38, Kornel Benko wrote:
Am Sonntag, 11. März 2018 17:30:30 CET schrieb Michael Berger
<id...@online.de>:
Dear Lyx users,
is there a way to convert a LyX document made with MikTeX (Windows) in a
LyX TeXLive (Linux) document?
Thanks and best,
Michael
There should be no difference reg
Dear Lyx users,
is there a way to convert a LyX document made with MikTeX (Windows) in a
LyX TeXLive (Linux) document?
Thanks and best,
Michael
Rich, this is indeed annoying and one must wonder why this reappears
again and again although one does not at all uses such "outdated font
commands".
Fortunately, there is an easy cure.:
In > Document > Class > Custom add this: enabledeprecatedfontcommands
You find this cure if you scroll
, Michael Berger wrote:
Hallo Jürgen,
many, many thanks for the huge number of various improvements and continued
provision of so many special enhancements when using LyX for writing
Linguistic Papers. Makes working with LyX so much more comfortable!
Probably you already know, but just in case
Hallo Jürgen,
many, many thanks for the huge number of various improvements and
continued provision of so many special enhancements when using LyX for
writing Linguistic Papers. Makes working with LyX so much more comfortable!
Just great!
Michael
Yes, it is in vatious ways, see screenshot.
Michael
On 15.12.2017 09:21, Wolfgang Engelmann wrote:
Is it possible to use pstricks in lyx? If not, tikz/pgf?
Wolfgang
Dear Lyxers,
my Linguistic Thesis at first written in classicthesis-LyX-v4.1 converts
to PDF in both versions of classicthesis-LyX-v4.2 but only after having
removed all letters used to typeset African Languages as shown in Table
7 of the Comprehensive LaTeX Symbol List by Scott Pakin.
beautiful documents - I use it for Linguistic papers.
If successful I will revert back to you.
Cheers and thanks again.
Michael
Am 31.07.2017 um 22:33 schrieb Guenter Milde:
On 2017-07-31, Michael Berger wrote:
Hi Günter,
let me recall: with 'Tools > Reconfigure' done I still
bibtex8
Is 'biber' installed or not: see the screenshot
I have Mageia 6, KDE
As a layman I have no idea if this info is helpfull. If it is I still
don't know what to do.
Michael
Am 31.07.2017 um 10:07 schrieb Guenter Milde:
On 2017-07-31, Michael Berger wrote:
..
..
Making "bibe
Thanks Günter,
I did 'Reconfigure' several times. And for sure, the complete texlive
(as offered under Mageia6) is installed. I will further check if biber
is missing/installed on my system.
Michael
Am 31.07.2017 um 10:07 schrieb Guenter Milde:
On 2017-07-31, Michael Berger wrote:
I
Hello,
I found that classicthesis-Lyx-v4.2_biblatex-bibtex8 compiles to PDF in
Mageia6 whereas classicthesis-Lyx-v4.2_biblatex-biber does not.
'Documents > Settings > Bibliography > Bibliography Generation >
Processor' is expected to show
* Default
* biber
* bibtex
* bibtex8
This is
btex8
while in Mageia6 'biber' is still missing.
So, looks like one must wait till "biber" is made available in Mageia6
and working.
Thanks a lot for your continuous support, and cheers!
Michael
Am 29.07.2017 um 18:06 schrieb Michael Berger:
Jürgen,
I did as you told me
- I in
for bothering you!
Michael
Am 29.07.2017 um 13:51 schrieb Jürgen Spitzmüller:
Am 29.07.2017 10:42 vorm. schrieb "Michael Berger" <id...@online.de
<mailto:id...@online.de>>:
BibTeX error: I found no \bibstyle command-while reading file
ClassicThesis.aux
Hi Philip, hi Jürgen,
thanks for your comments and suggestions. Whatever I tried the
compilation to PDF fails.
I eventually tried Miede's original file once more - absolutely nothing
added or removed, nothing changed.
When trying to compile to PDF I get:
BibTeX error: I found no \citation
Philip,
I also checked Document > LaTeX log > Log Type in
classicthesis-LyX-v4.2_biblatex_bitex8
which compiles to PDF without any problem - but there too, 'LaTex log'
is greyed out !!
Michael
Am 28.07.2017 um 17:24 schrieb Michael Berger:
Philip,
Document > 'LaTex log' is g
Philip,
Document > 'LaTex log' is greyed out, so I can't check.
Michael
Am 28.07.2017 um 15:19 schrieb PhilipPirrip:
On 07/27/2017 02:20 PM, Michael Berger wrote:
Bibtex error: I found no \citation commandwhile reading file
ClassicThesis.aux Bibtex error: I found no \bibdata comm
Hi experts, this is just an ordinary user asking for help,
I am coming from Mageia 5 and just just installed Mageia 6
When trying to compile to PDF I get
Bibtex error: I found no \citation commandwhile reading file
ClassicThesis.aux Bibtex error: I found no \bibdata commandwhile
Dear all,
I am now using Mageia 6, Kernel 4.9.35-desktop-1.mga6 / 64-bit / KDE
My many LyX documents of various classes produced in Mageia 5 generated
PDF without any problems. In Mageia 6 all other document classes do so
as before but my "ClassicThesis.lyx" documents throw out error messages.
Hi Juanjo,
I am still not clear what you actually meant saying "...a simple Latex
block with "\delta" within" etc.
look at the screenshot attached - is that what you meant to achieve?
Michael
Hi Juanjo, there are many ways of writing Greek characters.
The far easiest and thus the most simple
Hi Juanjo, there are many ways of writing Greek characters.
The far easiest and thus the most simple way would be to select a
character from the symbols list:
Insert > Special character > Symbols > then select the category Greek or
Greek extended and click on the character to be inserted.
Dear Lyxers,
is it possible to have (two or more) glosses side by side and if so,
how can that be done?
Thanks and cheers
Michael
Dear all,
having to do a fresh installation of Mageia 5 due to hardware problems I
accidentally choose "German" as languge instead of "English".
Can a switch to "English" be accomplished without going through a fresh
installation of Mageia?
Thanks and regards,
Michael Berger
Dear all,
I have quite a number / variety of documents (domain linguistic and
engineering) created with LyX 2.1 and Mageia5 / KDE.
It may take some time till Mageia comes along with newer versions of
LyX, Latex (this is by no means a negative statement; Mageia is just
late but great!) and I
On 25.02.2017 08:11, Jürgen Spitzmüller wrote:
Am Freitag, den 24.02.2017, 11:11 -0800 schrieb Christos Makridis:
Just to give an example of one of my citations, see below.
@article{JaimovichSiu:highskilled,
title={{High-skilled immigration, STEM employment, and non-routine-
biased technical
On 02/20/2017 01:19 PM, Jürgen Spitzmüller wrote:
2017-02-20 12:08 GMT+01:00 Michael Berger <id...@online.de
<mailto:id...@online.de>>:
Jürgen, mini example file attached ( I m aware what you need but
this time I thought it is 'just the syntax code' !)
The code was w
Jürgen, mini example file attached ( I m aware what you need but this
time I thought it is 'just the syntax code' !)
Michael
On 02/20/2017 10:34 AM, Jürgen Spitzmüller wrote:
Am Montag, den 20.02.2017, 10:15 +0100 schrieb Michael Berger:
Hi all,
I am trying to draw an arrow between
Hi all,
I am trying to draw an arrow between the words 'John' and 'his' but get
Latex Error: Emergency stop / no legal end found.
Can somebody give me a hint, please!
I attach screen shots of the code in Lyx and respective part of the
error log file.
Thanks and cheers,
Michael
Hello all,
building and viewing an example tex file works with Kile but not with
Texmaker or Texstudio.
See the example as per screenshot
Texmaker and Texstudio throw the following Error (two times):
*line 75 ! Undefined control sequence.\sub #1->\textsubscript{#1}*
Line 75 is the third
this is a test, no action required
Michael
On 01/26/2017 03:18 AM, Steve Litt wrote:
On Tue, 24 Jan 2017 16:41:33 +0200
On 2017-01-24 14:27, Michael Berger wrote:
Dear all,
if you should plan to purchase software from Hamrick Software USA
(www.hamrick.com), please, be warned not to be trapped by this
Company's fraudulent statements
Dear all,
if you should plan to purchase software from Hamrick Software USA
(www.hamrick.com), please, be warned not to be trapped by this Company's
fraudulent statements and business practices.
My story.
When looking for software to be used with HP Scanjet G4050 (not fully
supported by
On 01/16/2017 01:41 AM, Mohamed Eldlio wrote:
Dear Sir/madam,
First I would like to thank you for wonderful software (i.e. LYX).
I am using LYX to write my thesis, I almost finish it, but the problem
is :
*How to add a **page of a dedication after the title page and before
a table of
On 01/16/2017 01:41 AM, Mohamed Eldlio wrote:
Dear Sir/madam,
First I would like to thank you for wonderful software (i.e. LYX).
I am using LYX to write my thesis, I almost finish it, but the problem
is :
*How to add a **page of a dedication after the title page and before
a table of
Sorry,
Michael
On 01/07/2017 08:11 AM, gordon cooper wrote:
The question was about baed, not bead.
G.
On 07/01/17 20:08, Michael Berger wrote:
On 01/06/2017 09:08 PM, Joel Kulesza wrote:
Colleagues,
Does anyone know what "baed" means? With all lower case, I cannot
On 01/06/2017 09:08 PM, Joel Kulesza wrote:
Colleagues,
Does anyone know what "baed" means? With all lower case, I cannot
find any reasonable definition.
However, the spell checker (dialog and interactive) in LyX doesn't
flag it as misspelled (though it's a case of me wanting to type
Great!
Thanks Jürgen,
Michael
On 01/06/2017 11:47 AM, Jürgen Spitzmüller wrote:
Am Freitag, den 06.01.2017, 09:12 +0100 schrieb Michael Berger:
Dear lyxers,
despite extensive search and investigation I could not find a method
of producing that bracket with an up-arrow in a linguistic gloss
Dear lyxers,
despite extensive search and investigation I could not find a method of
producing that bracket with an up-arrow in a linguistic gloss as shown
in the attached screnshot.
Can somebodey help, please?
Thanks and regards,
Michael
Michael Berger
Registered Linux User
On 11/19/2016 11:39 AM, Jean-Marc Lasgouttes wrote:
Le 19/11/2016 à 10:25, Michael Berger a écrit :
Dear all,
I observe that numbering of footnotes in boxes is automatically changing
to 'lettering' - see screen shot. Is this intended behavior or could it
be specific to classicthesis? I am
On 11/20/2016 08:15 AM, edu Gpl wrote:
Please see this link:
http://tex.stackexchange.com/questions/106306/using-footnotemark-with-letters
Best regards
بتاريخ ١٩/١١/٢٠١٦ ١٢:٢٧ م، كتب "Michael Berger" <id...@online.de
<mailto:id...@online.de>>:
De
Dear all,
I observe that numbering of footnotes in boxes is automatically changing
to 'lettering' - see screen shot. Is this intended behavior or could it
be specific to classicthesis? I am not sure to like it or not.
Any comment is appreciated.
I am using Lyx 2.2.2, texlive 2016, Miede's
On 11/15/2016 07:30 AM, caoke...@163.com wrote:
Dear all,
I am using Lyx to realize Multiple and sectioned bibliographies in
book. I have spent a lot of time with tips from web page but that does
not work.
I do not know how to install the python wrapper script bibtexall
On 11/15/2016 07:30 AM, caoke...@163.com wrote:
Dear all,
I am using Lyx to realize Multiple and sectioned bibliographies in
book. I have spent a lot of time with tips from web page but that does
not work.
I do not know how to install the python wrapper script bibtexall
On 11/04/2016 09:16 AM, Guenter Milde wrote:
On 2016-11-04, Michael Berger wrote:
On 11/02/2016 02:16 PM, Michael Berger wrote:
On 11/02/2016 10:02 AM, Guenter Milde wrote:
re Unicode(utf8) prevents inserting certain symbols in body text.
(Inserting (in the LyX GUI) is not a problem
On 11/04/2016 08:56 AM, Michael Berger wrote:
On 11/02/2016 02:16 PM, Michael Berger wrote:
On 11/02/2016 10:02 AM, Guenter Milde wrote:
On 2016-11-01, Michael Berger wrote:
Dear all,Mageia5, Lyx 2.2.2, Texlive2016, using
classicthesis-LyX-v4.2_biblatex_biber
In body text I try using
On 11/02/2016 02:16 PM, Michael Berger wrote:
On 11/02/2016 10:02 AM, Guenter Milde wrote:
On 2016-11-01, Michael Berger wrote:
Dear all,Mageia5, Lyx 2.2.2, Texlive2016, using
classicthesis-LyX-v4.2_biblatex_biber
In body text I try using using Insert > Special Character > Symbols
On 11/02/2016 10:02 AM, Guenter Milde wrote:
On 2016-11-01, Michael Berger wrote:
Dear all,Mageia5, Lyx 2.2.2, Texlive2016, using
classicthesis-LyX-v4.2_biblatex_biber
In body text I try using using Insert > Special Character > Symbols >
any category (e.g. Mathematical Operator)
Th
Dear all,
Mageia5, Lyx 2.2.2, Texlive2016, using classicthesis-LyX-v4.2_biblatex_biber
In body text I try using using Insert > Special Character > Symbols >
any category (e.g. Mathematical Operator)
This worked in Lyx 2.1 but in Lyx 2.2.2 either an error is thrown out or
nothing happens
Dear List,
The screenshot shows my code in Lyx 2.1/Classicthesis4.1; in the table
of contents it produces exactly what is desired:
Nomenclature and Glossary 142
The same codeentered in Lyx 2.2.2/Classicthesis4.2(biblatex_biber)
produces in the table of content:
Nomenclature and Glossary
On 10/22/2016 03:55 PM, Jürgen Spitzmüller wrote:
Am Samstag, den 22.10.2016, 13:41 +0200 schrieb Michael Berger:
here comes a mini file and I am keeping my fingers crossed!
You need to load nomencl with the "refpage" option in order to display
page references. Pass "refpa
On 10/21/2016 06:19 PM, Jürgen Spitzmüller wrote:
Am Freitag, den 21.10.2016, 10:26 +0200 schrieb Michael Berger:
when using Lyx 2.1 / classicthesis 4.1 / texlive2013 the last two
lines
of the screen shot produced a very appealing nomenclature list in
PDF.
But after switching to Lyx 2.2.2
Dear list,
when using Lyx 2.1 / classicthesis 4.1 / texlive2013 the last two lines
of the screen shot produced a very appealing nomenclature list in PDF.
But after switching to Lyx 2.2.2 / texlive 2016 and using
'classicthesis-LyX-v4.2_biblatex-biber' neither of said two lines does
work.
On 10/09/2016 09:00 PM, N. Andrew Walsh wrote:
Hi List,
I have numerous bibliography entries of articles that are given in the
bibliography with their respective page ranges. However, I want to
have some citations give the specific page on which the cited material
appears. Is there a way to
On 10/07/2016 06:06 AM, Michael Berger wrote:
Dear all,
after exporting my LyX documents to PDF 'Thumbnails', 'Reviews', and
'Bookmarks' in Okular's Navigation Panel are always active while
'Contents' is inactive for others.
Could somebody out there please advise how to active
Dear all,
after exporting my LyX documents to PDF 'Thumbnails', 'Reviews', and
'Bookmarks' in Okular's Navigation Panel are always active while
'Contents' is inactive for others.
Could somebody out there please advise how to active the Contents view?
Thanks and cheers,
Michael
On 10/04/2016 06:40 PM, racoon wrote:
I used to insert section labels right after the heading:
1. Some heading[sec:Some-heading]
This is actually how it is done in the User Guide as well. However,
this produces the following source:
\section{Some heading\label{sec:Some-heading}}
But it
On 10/04/2016 09:52 AM, Michael Berger wrote:
Hi,
because of some foolish experiments I lost all menus, tool bars etc.
in Okular and can no longer manipulate the PDF output. What I see now
is just the PDF text and the only action possible is scrolling.
Removing and re-installing Okular did
Hi,
because of some foolish experiments I lost all menus, tool bars etc. in
Okular and can no longer manipulate the PDF output. What I see now is
just the PDF text and the only action possible is scrolling.
Removing and re-installing Okular did not help.
How can I make all these bars
On 09/24/2016 01:01 PM, Michael Berger wrote:
Dear Jürgen,
tough struggle but in the end just GREAT!
Thanks,
Michael
On 09/24/2016 12:13 PM, Jürgen Spitzmüller wrote:
Taking back to the list, since others might be interested as well what
the problem is.
(Michael wrote me in PM
Dear Jürgen,
tough struggle but in the end just GREAT!
Thanks,
Michael
On 09/24/2016 12:13 PM, Jürgen Spitzmüller wrote:
Taking back to the list, since others might be interested as well what
the problem is.
(Michael wrote me in PM that the problem persists with the most recent
modules for
On 09/22/2016 08:22 AM, Jürgen Spitzmüller wrote:
Am Donnerstag, den 22.09.2016, 05:08 +0200 schrieb Michael Berger:
Dear Jürgen,
talking to an expert always rewards - in one way or another.
In the course of making the mini file 'less complex' I removed all
loaded modules except 'Linguistics
On 09/21/2016 05:29 PM, Jürgen Spitzmüller wrote:
Am Mittwoch, den 21.09.2016, 17:05 +0200 schrieb Michael Berger:
Dear jürgen,
thanks for being prepared to look into this.
Hope this mini file is informative enough.
No, it is not. This file does not compile here, since it requires child
Dear LyX users,
I am using multiple indexes (two different indexes) in my document.
The page numbers in one print blue while black in the other one.
I should add that cross references appear blue as well as the
referenced page numbers in table of contents, in nomenclature, in
bibliographies
On 09/03/2016 03:57 AM, John Kane wrote:
And what did you do---in LyX terms. We can probably do the
stubbornness ourselves, well some of us anyway.
On 2 September 2016 at 06:52, Michael Berger <id...@online.de
<mailto:id...@online.de>> wrote:
Just managed to resolve the
Just managed to resolve the issue myself.
Applied method: stubbornness mixed with trial and errors.
cheers,
Michael
On 09/01/2016 05:08 PM, Michael Berger wrote:
Hi,
I am trying to set up multiple references in a classicthesis 4.1
document (applying the master/child concept
would be greatly appreciated.
Michael Berger
PS. I did study what I found - ideally would be somebody with empirical
cognition :-D
1 - 100 of 535 matches
Mail list logo
