On 12/06/2010 11:55 AM, Jose Quesada wrote:
Hi,
I'm not sure if this is only on my particular doc, but it seems to me
that lyx chokes on documents with many subsections?
It's a notes doc. It may have close to a hundred headinds (section,
subsection etc).
Typing becomes slow. Even moving around
On 19/06/2010 1:00 PM, Daniel CLEMENT wrote:
[...] I come
across another problem : when I enumerate within a theorem:
Theorem X: The following are equivalent:
1. property one ;
2. property two.
the the properties come out upright, unlike the beginning of the
theorem.
(That could be a
On 20/06/2010 10:15 AM, Stephan Maseizik wrote:
My two questions are:
-What do I have to do to build the lyx2.0.deb package and
-how do I install both versions (1.6.x and lyx2.0) in parallel using
dpkg?
I don't know what checkinstall is, but one way to have 2.0 and 1.6
co-existing is
On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
experienced people would have know that one has to run
autogen
and not autogen.sh
autogen.sh is correct, not autogen. The complete procedure is:
cd ~/lyx-devel
./autogen.sh
./configure
make
optionally you would also run:
sudo make install
On 22/06/2010 12:50 PM, Julien Rioux wrote:
cd ~/lyx-devel
../autogen.sh
../configure
make
sorry, it should be:
cd ~/lyx-devel
./autogen.sh
./configure
make
not sure how the extra . got in there
--
Julien
On 22/06/2010 1:05 PM, Wolfgang Engelmann wrote:
Am Tuesday 22 June 2010 18:50:24 schrieb Julien Rioux:
On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
but this gives me:
wolfg...@wolfgang:~/lyx-devel$ autogen.sh
bash: autogen.sh: command not found
The ./ (dot slash) is important
On 22/06/2010 1:18 PM, Rich Shepard wrote:
The errors are limited to the beamer class (now it's the
\makebeamertitle
error holding me up) and not the base tetex installation. I've just
modified
the article that accompanies the slide presentation and it compiles just
fine.
Is
On 22/06/2010 1:42 PM, Rich Shepard wrote:
Hope the attached is minimal enough; it's the title.
Rich
So, once I remove the empty Section, it compiles.
Along the way, I had to install some fonts. (installed
fonts/type1/public/fpl/fplrc8a.pfb from the fpl package using miktex)
Either or
On 22/06/2010 5:04 PM, Wadim wrote:
I am not sure what is the right name of this box in english because i am
using the german version of LYX. It is the box where you type in program
code. I have inserted this box in my document and written stuff into it. In
Lyx everything looks fine, but when I
On 23/06/2010 3:50 AM, Artimess wrote:
I do appreciate if someone help me to figure out how to use memsty.sty
package. It is part of memoir class.
When I include it in document setting of a working document I get lots of
errors. So what I did was created a small
file using it independently
For the benefit of everyone, here's a step by step guide of how I
successfully compiled and installed lyx on ubuntu linux, from the
subversion source code repository. I never went back.
A) Downloading the source code
--
First you want the source files. There are
On 09/07/2010 5:31 AM, Iain Waugh wrote:
adding \graphicspath{/subfolder/pictures/} into the master lyx file
preamble.
Try an absolute path, that might quickly solve your problem (untested).
--
Julien
On 14/07/2010 5:44 PM, Michael S. Morales wrote:
Forgive if I completely missed this in the user's guide, but how can I
edit the source. I cannot seem to figure out how to edit the source
directly. I am trying to use \item [{fact that}] but I can only use
\item [{factthat}].
Thanks,
Michael
On 13/07/2010 11:46 AM, Hellmut Weber wrote:
Hi list,
i don't remember whether this has already been discussed in this list...
I have a document (based on koma article) in which i use fancy headers.
That works very well in the main part of the document, but the the first
page of the index (at
On 15/07/2010 12:27 PM, Stephan Witt wrote:
Dear LyX users,
since some time it is more and more common to zoom-in or zoom-out the workspace
of an application with Ctrl-plus or Ctrl-minus key-strokes. On a Apple Mac this
would be Cmd-plus or Cmd-minus. Traditionally in LyX the Ctrl-minus keys
On 16/07/2010 5:32 AM, Sajjad wrote:
Hello Forum,
I have made similar post couple of months ago. The new class that i am
trying to incorporate into LyX layout is accompanied by a description of the
class file.
I did some configuration so that get the liuthesis.layout in
On 23/07/2010 11:17 AM, Paul Johnson wrote:
Hi, everybody.
In the last year or so, I've been testing services like CiteULike and
Zotero to build a biblio database as I research. This works pretty
well to output the citations to a bib file and work with LyX.
I notice only one substantial
On 23/07/2010 5:33 PM, Danny Parker wrote:
I'm working on a dissertation with my colleges thesis.cls and I'm having a
problem including graphics. If I don't include them and compile to pdf
everything works great. If I include a graphic (whether jpg, png, bmp, or
eps) I get an error saying
, revtex4.layout and stdclass.inc definition files.
# Author: Julien Rioux jri...@physics.utoronto.ca
# Author: Manoj Rajagopalan
# Some notes:
# - The \definecolor's are there to avoid LyX bug #4625.
# - We provide natbib-internal according to LyX bug #5182.
# - The command \lovname is missing
On 27/07/2010 6:58 PM, Tennessee Carmel-Veilleux wrote:
[...] If
you feel adventurous, you could upgrade the moderncv LyX layout to support
the latest moderncv version and all its commands. It would take several
hours and still would require the }{ in some places, but you could cut
down on the
On 27/07/2010 7:14 AM, Nan Zhao wrote:
Dear Lyx users,
While writing my thesis, I am facing a problem with the bibliography natbit
within lyx. I am constantly having an (author?) in front of each citation
I am using in the text. If anyone would know how to solve this issue, I
would very
On 27/07/2010 2:54 PM, Ebbe Juel Bech Nielsen wrote:
Hi
I have a problem rotating a floats containing pictures.
I tried rotating by right clicking, Rotate sideways, but I get an error
message when compiling saying
Latex Error: Command \newfloat already defined
Not rotating the floats
On 05/08/2010 6:02 AM, Paul Anton Letnes wrote:
Hi!
First things first: Lyx version 2.0 alpha 5, OS: mac os x 10.6.4, installed by
using the precompiled .dmg from the lyx.org homepage.
My situtation is as follows: I am trying to write an article together with
someone who is used to
On 12/08/2010 7:13 AM, Philipp Eikerling wrote:
Dear lyx-users,
I´m using Lyx 1.6.7 with MikTex 2.8 and .bib is generated via Citavi 2.5.
Lyx language is german.
Windows 7.
as I try to insert a BibTeX-generated bibliography in my Lyx document it
seems like Lyx is searching for bibtex but does
On 12/08/2010 8:17 AM, Pascal Francq wrote:
Hi,
I am using the psfrag package to modify the text included in graphics. When I
use pdflatex from Lyx (2.0 beta 5), the psfrag modifications are not take into
account, while when I use postscript there are no problem.
When I use ps2pdf, I have
On 19/08/2010 7:28 PM, Rob Oakes wrote:
However, Ubuntu updated the version of LaTeX to TeXLive 2009 in 10.04.
FYI Although this is true, you cannot use the texlive 2009 package
manager when texlive 2009 is installed from the ubuntu repository.
--
Julien
On 20/08/2010 5:57 AM, Pascal Francq wrote:
Hi,
I use the pstool package to combine psfrag and pdflatex and it works well. In
practice, to include a graphic I need a 'file.eps' and I use the \psfragfig
command of the form :
\psfragfig[some options such as those of
On 20/08/2010 7:29 AM, Sven Hoexter wrote:
The Problem is that you often end up with a mess because some third party
installers/package manager overwrite files of your distribution packages.
And a few weeks later a new update for your distribution arrives and
replaces some of the newer files
On 20/08/2010 10:49 AM, Rob Oakes wrote:
This is how, after all, python packages are managed (through setup.py). But I
agree if you really need this, advanced users can figure it out by themselves.
I can only dream.
I'm not sure that it's that simple. (Or if it is, I really need to learn
On 30/08/2010 8:56 AM, Piotr A. Dybczyński wrote:
Hi,
Hi
I am in urgent need of obtaining LyX layout file for the journal paper for
Monthly Notices of the Royal Astronomical Society (MNRAS).
Its LaTeX class is available at:
http://www.wiley.com/bw/static/mnras_latex.asp
I am not skilled
On 30/08/2010 1:53 PM, Torquil Macdonald Sørensen wrote:
Hi!
I'm using the article (AMS) document class and want to have two Lemmas
in a row with no additional text between them.
However, Lyx seems to combine the Lemmas into just one if I don't
include any text between them in standard format.
On 05/09/2010 9:58 AM, Diego Gruber wrote:
Hello,
I am trying to combine two images (fig_densities.eps
and fig_densities_zoom.eps) into one by slightly superimposing one on top of
the other. Now I managed to produce what I wanted using PSTricks, running my
script on TexShop, but when I run the
On 06/09/2010 1:38 PM, Hal Kierstead wrote:
Still, for a wish list, it would be nice to have a special tex mode, sort of
like math mode, so that simple things like \noindent, \cite, etc. could be
automatically entered into LyX.
That's on my wishlist too. For users coming from the TeX world
On 09/09/2010 5:26 AM, Evan Mason wrote:
Also in
agutmpl.tex there is the option in draft mode to include figures or not.
You probably want to learn how to do this from the template file
agutempl.tex, and then apply what you have learned to your LyX document.
That means putting the necessary
On 13/09/2010 3:22 PM, minhvd wrote:
I create several float tables. When I export to pdf, the labels are not
continous. For example: table 7, table 9, ... but in Lyx document; the
labels are continuous: table 7, table 8 ...
I tried to copy paste, create new table ... but I have not succecced.
On 17/09/2010 4:18 AM, James Lawrie wrote:
Hi List,
I'm trying to import my CV from tex into Lyx. I'm doing
File-Import-Latex Plain-Filename using Lyx 1.6.7.
It imports the file, but only imports the first section, after a few
lines of whitespace.
The tex file I'm trying to import is
On 24/09/2010 3:01 PM, Richard Heck wrote:
This could almost be done without any changes to LyX. Here's how.
1. Set up a cron job that does svn up filename.lyx every two minutes.
2. Set up another cron job that watches filename.lyx and, if it changes,
does svn ci filename.lyx.
If I was crazy
On 02/10/2010 4:25 PM, Steve Litt wrote:
On Saturday 02 October 2010 14:55:14 Steve Litt wrote:
On Saturday 02 October 2010 11:54:46 Paul A. Rubin wrote:
On 10/2/2010 11:16 AM, Steve Litt wrote:
What happens if you load the afterpage package and put the macro
inside \afterpage{}? Hopefully
On 03/10/2010 7:32 AM, Madalina Erascu wrote:
Could somebody tell me how could I get a new line in math mode in LyX 1.6. I
have tried Ctrl+Enter but I get an eqnarray.
If eqnarray doesn't please you, there are several other possibilities.
Have a look at the great math manual that you find in
On 03/10/2010 4:57 AM, Steve Litt wrote:
U D Man Julien!!!
Well, to be fair the main hint of using afterpage came from Paul.
\gdef didn't work, but \xdef sure did. I replaced this:
\afterpage{\renewcommand{\plotdatehdr}[0]{\plotdateondeck}}
With this:
On 06/10/2010 10:47 PM, Joel Schiff wrote:
When I insert an image into a float box, I have the cursor to the left
of the Figure #, and press return, insert the image, but the image
always ends up on the left hand side of the box, even in the dvi file.
Of course I want all images centered on the
On 15/10/2010 4:55 AM, Lea Rennert wrote:
Hi,
I am working with Lyx 1.6.2 on windows, and I am writing my thesis in
the book (KOMA-script) - class. I inserted my citations with Citavi,
but I think that should not matter - I have a .bib file for the
Bibliography (natbib-style) that I loaded. My
On 18/10/2010 9:16 AM, Waluyo Adi Siswanto wrote:
http://sites.google.com/site/lyxthesistemplate/document-settings-2/latex-preamble
Regards
waluyo
Nice info, thanks for sharing.
--
Julien
On 17/10/2010 2:49 PM, Agustin Lobo wrote:
but apparently none of these environmental variables is set, i.e
echo $TEXMFHOME
yields a blank line.
What do I have to do in order to get these environmental variables set?
Depends on your shell. Usually, a line like this in .bashrc:
On 16/10/2010 4:09 AM, Lea Rennert wrote:
That was a good suggestion. I went back and checked, and the problem
seems to appear in cases with more than one author. In fact, in those
cases, instead of just giving Mishel et al.(2009), the in-text
citation reads Mishel et al.(2009)Mishel, Bernstein,
On 17/10/2010 10:56 AM, Lea Rennert wrote:
Hi,
I am working with Lyx 1.6.2 on windows, and I am writing my thesis in
the book (KOMA-script) - class. I have chosen natbib (author-year) in
Documents settings and loaded the bib-file using apalike since this
format seems to work best for me.
On 19/10/2010 5:19 AM, Daniel CLEMENT wrote:
Dear list members,
I need to typeset a more compact version of a document with a few
matrices.
Is there a smart way to convert them (ordinary TeX matrix environment)
to the \smallmatrix version, which is also supported by LyX?
Some of them are
On 26/10/2010 8:37 PM, Jack Tanner wrote:
Never mind. It turns out I got hit by this bug:
http://sourceforge.net/tracker/index.php?func=detailaid=3067362group_id=10783atid=110783
There are several bugs that have poped up on the MikTeX mailing list
since their 2.8 release; to be safe I
On 30/10/2010 4:21 PM, tobi7212 wrote:
Dear Lyx-users and developers,
I need your help.
I want to refer to an external file in Latex-code in Lyx ERT.
How can that be done?
I would be very happy if anyone has an idea how to handle. Please answer!
I found out: It works only with absolute file
On 05/11/2010 11:31 AM, Emil Pavlov wrote:
На 1.11.2010 20:21, Emil Pavlov написа:
How can I set the alignment to centered for all table and figure
floats? I have to change it manually through paragraph settings
every time?
Best regards,
Emil Pavlov
I am afraid that my e-mail didn't get
On 09/11/2010 10:30 AM, Rob Oakes wrote:
(Including a chapter that covers this topic in detail, amongst other
things. But it isn't quite finished. And I am not sure that it will be in time
for your debate. Otherwise, i would send that too. It's where the figures came
from.)
I find your book
On 12/11/2010 12:53 PM, Steve Litt wrote:
On Friday 12 November 2010 08:41:39 Pavel Sanda wrote:
Mukhtar Ullah wrote:
But now something else was noticed... all my beautiful eps figures have
been rasterized! Augh! They are hideous in output. :(((
this would be serious issue, please fill
Does anybody have a good layout or template for writing poetry in LyX
(LaTeX)?
--
Julien
On 12/11/2010 2:52 PM, Pavel Sanda wrote:
please people can you check that you have installed eps2pdf?
errrm epstopdf (part of texlive here)
$ which eps2pdf
which: no eps2pdf in
$ which epstopdf
/cygdrive/c/miktex/miktex28/miktex/bin/epstopdf
I reconfigured LyX and it is now using epstopdf
On 13/11/2010 7:24 PM, Charlie wrote:
\titleformat{\subsection}[wrap]
{\normalfont\fontseries{b}\selectfont\filright}
{\thesection.}{1.5em}{}
Replace with
\titleformat{\subsection}[wrap]
{\normalfont\fontseries{b}\selectfont\filright}
{\thesection.\thesubsection}{1.5em}{}
?
--
On 15/11/2010 12:40 PM, Jack Tanner wrote:
One more thing I can't figure out. Formatted Reference always gives me
figure 3 on page foo. How can I make it give me just figure 3?
In the preamble:
\newrefformat{fig}{figure~\ref{#1}}
and if you use hyperlinks and want figure 3 to be clickable,
On 16/11/2010 4:19 AM, Jannick Asmus wrote:
Hi,
sections or subsections inserted in track mode yield an compilation
error. Prompted error is, e.g., Use of \...@part doesn't match its
definition. Interestingly, changes of headings in track mode are not
liked either.
Did anyone get aware of
On 16/11/2010 8:03 AM, Emil Pavlov wrote:
Every time when I insert a float, a [h] appears between the label and
the figure. Do you have any idea where this can come from?
Yes, this is from the optional argument which specifies the float's
position, e.g. in latex:
% use default placement:
On 16/11/2010 1:14 PM, Påvel Nicklasson wrote:
I have never seen so strange pdf:s.
You would be surprised what sort of things can go wrong when printing.
In our office we got hit by several bugs including the shifted by one
character point bug and the mirror image. Of course these will
On 17/11/2010 2:02 PM, Matt Funk wrote:
does anyone know what this is?
powerdot is known not to work with pdflatex; this class supports only
dvipdfm or ps2pdf. This ought to be mentioned with a note in the LyX
template.
(in fact this is correctly noted in the version that comes with LyX,
On 16/11/2010 4:56 AM, Påvel Nicklasson wrote:
To repeat in Ubuntu 10.10:
Make a pdf of Additional Features Manual from the help menu. (I use
default settings for everyting)
The PDF Looks OK in Evince.
In Evince: Go to Archive - Print - Print preview. The text is scrambled.
The text is scrambled
On 18/11/2010 11:21 AM, Marc Mouries wrote:
Hi,
I am new to Lyx and just tried it to use it with Lilypond.
In LyX I do: File New from Template, then navigate up one directory,
select the examples/ directory, and select lilypond.lyx.
I tested with Mac and the file lilypond.lyx was not in the
On 18/11/2010 11:37 AM, Marc Mouries wrote:
thanks the reconfigure worked. I was able to open the file without the dialog.
Now when i click on view i get the following error message:
Could it be a 'x' missing at the end of pdflate?
The command is correct (I am most certain), only the message
On 18/11/2010 11:51 AM, Julien Rioux wrote:
The command is correct (I am most certain), only the message is cut off
(yet another issue with the report of errors!).
My guess is something went wrong with lilypond-book. Unfortunately, the
report of errors from lilypond-book to the LyX interface
On 18/11/2010 12:23 PM, Marc Mouries wrote:
find attached the result of the command.
The errors i noticed were:
1) Running lilypond...GNU LilyPond 2.13.39
programming error: file name not normalized:
C:\\Users\\Marc\\Documents\\tmpdir\\snippet-names--213547792.ly
2) Missing
On 18/11/2010 2:21 PM, Vincent van Ravesteijn wrote:
On Thu, Nov 18, 2010 at 8:18 PM, ehud.kap...@gmail.com
ehud.kap...@gmail.com wrote:
Can Lyx be reconfigured from the command line (from a batch file)? It would
be convenient to do it since I update TexLive from a batch file, so I could
On 19/11/2010 7:51 AM, Emil Pavlov wrote:
Perhaps, I am stupid, but I cannot find where the difference between
Aligned Environment and AMS align Environment in section 18.2 is.
Can you give a page number for the math manual in Lyx 1.6.7?
I didn't look it up but aligned must be used within
On 19/11/2010 8:42 AM, Rudi Gaelzer wrote:
I'm asking because the alpha5 version is issuing error messages when it tries
to load the theorem modules.
What's the error message?
--
Julien
On 16/11/2010 8:56 AM, Jannick Asmus wrote:
\renewcommand{\lyxadded}[3]{{\cbstart\color{lyxadded}{}#3\cbend}}
\renewcommand{\lyxdeleted}[3]{{\cbstart\color{lyxdeleted}\sout{#3}\cbend}}
That's what I meant by funky code. The reason I asked is that I had a
suspicion. I also have my own
On 16/11/2010 8:53 AM, Jean-Marc Lasgouttes wrote:
I think this is fixed in a recent (2 days?) ubuntu evince update.
Doesn't seem so. I'm up to date on the updates.
Evince version: 2.32.0-0ubuntu1
--
Julien
On 21/11/2010 2:28 PM, Jim Rockford wrote:
Use the '-sysdir' command line parameter or set the environment variable
LYX_DIR_16x to the Lyx system directory containing the file
'chkconfig.Itx'.
The problem appears to be the 'chkconfig.Itx' file. I don't see it
anywhere within the Lyx
On 21/11/2010 6:44 AM, Thomas Vandieken wrote:
WindowsError: [Error 2] Das System kann die angegebene Datei nicht finden:
'%WIN
DOWS\\system32\\cmd.exe /c latex
\\nonstopmode\\input{c:/dokume\\string~1/tommy
/lokale\\string~1/temp/tmpe06ohs.ltx}'
Hi,
Thanks for your report. The message says
On 05/12/2010 7:51 PM, Steve Litt wrote:
Hi all,
Where is the LyX spellcheck word list kept? I'd like to maintain a distinct
list for each book, so that character names don't trigger.
Thanks
SteveT
Steve Litt
Recession Relief Package
http://www.recession-relief.US
Twitter:
On 07/12/2010 1:53 PM, Steve Litt wrote:
It might be as simple as adding a special comment to the document:
# LYX_PERSONAL_DICTIONARY=/home/slitt/books/thrive/thrive.pws
and then being able to edit it from a Docuemnt-Settings
You might even be able to store the private list of words itself
On 22/12/2010 12:21 AM, Eric wrote:
Julien Riouxjriouxat physics.utoronto.ca writes:
Here's an updated layout file for LyX 1.6.x
Let us know how it works for you. I have a version for LyX 2.0 with
template file that I plan to submit to the developers soon.
Cheers,
Julien
Hi Julien,
I'm
On 22/12/2010 9:16 AM, Eric Cavalcanti wrote:
Hi and thanks for the response!
I apologise, I should have given more details of my system. I use
MacOS 10.5.8, and recently installed texlive2010 through the mactex
distribution (over an old texlive2007). I installed revtex4-1
following the
On 22/12/2010 1:56 PM, Tim Wescott wrote:
I have a whole family of documents that I'm working on, all of which I
want to have the same look and feel. I tried making a separate last page
document, with blurbs for my company and a copyright notice, and putting
it in with a LaTeX command:
On 07/01/2011 1:30 PM, Joel Schwartz wrote:
Hello Lyx Users,
I'd like to find a way to type paragraphs so that the first sentence of the
paragraph is automatically in bold font and everything after the end of the
first sentence is in standard style. I've typed the paragraphs in this
email in
On 07/01/2011 3:16 PM, Steve Litt wrote:
I'd start by looking at the source code for the Description environment.
That environment bolds only the first*word*. So instead of bolding until a
space, you could bold to a period, although heaven help you if you have to use
an abbreviation in the
On 07/01/2011 6:40 PM, Joel Schwartz wrote:
I haven't gotten beyond the tutorial and user's manual yet, so I don't know
when I'll have the expertise to take this any further. Indeed, I decided to
try lyx to make my life easier so that I could spend*less* work time trying
to format my MS-Word
On 17/01/2011 4:57 AM, Wolfgang Engelmann wrote:
Hi,
I try to use Lilypond under Lyx/linux (Debian) and wonder whether somebody
could share his experiences re download (debian package? compile?) with me.
Wolfgang
If you're looking for advices on how to build from source, I usually do
1)
On 17/01/2011 4:57 AM, Wolfgang Engelmann wrote:
Hi,
I try to use Lilypond under Lyx/linux (Debian) and wonder whether somebody
could share his experiences re download (debian package? compile?) with me.
Wolfgang
...and if you want to keep LyX 1.6.x alongside the development version
(it is,
On 18/01/2011 3:21 AM, Wolfgang Engelmann wrote:
what is the reason to remove lyx if I have the latest already?
To avoid a version clash when you make install the development version.
Other ways to prevent this without removing your previous lyx are
a) don't run make install
b) run
On 18/01/2011 6:06 AM, Frédéric Perez wrote:
Hi,
I just got into some minor issue with the handling of the natbib package in
Lyx 2.0.0b3. There is a merge option in natbib that allows for
concatenating two bibliographic entries into a single one. Adding this
option to the package allows for
On 26/01/2011 2:33 PM, Bennink, Ryan S. wrote:
I am fairly new to LyX. I have been disappointed to find that simple commands defined
via \newcommand and \DeclareMathOperator in the preamble (for example,
\newcommand{\sinc}{sinc}) appear as evil red text onscreen. In fact, they
look exactly
Hi Ryan,
(list c.c.ed)
On 26/01/2011 4:33 PM, Bennink, Ryan S. wrote:
Thanks for the response Julien. I am starting to use math macros. But a
limitation of them is that I have to create them in LyX; they aren't
automatically generated when I import LaTeX files I have written by hand (which
On 24/01/2011 9:54 AM, Harold Mouras wrote:
Would you have any idea about a corresponding bibtex style ?
The various styles available are documented in many places. One such
place is here:
http://www.cs.stir.ac.uk/~kjt/software/latex/showbst.html
See if you can find a style that matches
On 02/02/2011 3:13 PM, Gabriel Kniffin wrote:
There are no strings in the log file that match the name of my .bib file
(Kniffin_2011.bib) which is in the same directory (in the E: drive) as my
LyX file, but there is some text at the bottom that points to a .bbl the C:
drive that matches the name
On 03/02/2011 3:12 AM, Jürgen Spitzmüller wrote:
Also sprach Kenward Vaughan:
The space worked fine. Should that always be done with ERT?
To terminate a command, if no other termination is done. In your case, LaTeX
thought you meant the command \onsted (which could very well be meant), and
On 05/02/2011 5:09 AM, Påvel Nicklasson wrote:
Is it posible to justify the width of some captions in a book project to
the width of the figure?
The book has two columns. All figures are placed inside floats. Some
figures are wide and span columns, but do not entirely fill the text
width. With
On 10/02/2011 5:49 PM, Danny Parker wrote:
I'm having a problem getting properly formatted figures in my output. At
first I was using LyX float and insert graphic command which I mistakenly
though would format figures according to the class of my thesis. However it
caused the caption of the
On 14/02/2011 1:46 PM, Danny Parker wrote:
Thanks for the response.
I understand what you are saying about it being a class problem.
Unfortunately there is no update. Is there a way I can make LyX's caption
conform to the single space, single line standard? Any advice would be
appreciated.
Actually I think putting in your document preamble (From the menu
Document Settings) this line:
\usepackage[labelsep=period]{caption}
is quick and sufficient.
On 14/02/2011 2:51 PM, Danny Parker wrote:
That did get the figure number and caption in the same line (much thanks)
but it did not single space the caption. Do you know of a quick way of
fixing that? I tried just using the paragraph settings but it seems the
class has redefined /singlespace
On 17/04/2012 10:09 AM, John McKay wrote:
Yeah, I actually tried things like this. It doesn't seem to work. Even if you actually modify the
file and then change it back, LyX still knows that the file hasn't changed.
So, I don't think whatever decision LyX is making is based on the
On 21/04/2012 10:51 AM, ewen wrote:
Hi,
I have a weird problem...
I have install last version of lilypond and lyx, and try to compile the lilypond
exemple in the LyX exemple folder.
The first execution gives me a reaaly pretty pdf. After i close the program i
get an error, and no way for having
On 16/01/2013 7:50 AM, bb wrote:
I imported a lilypond file with include-external file-filename.ly. I
checked that file in advance to make sure it will be compiled correctly
with lilypond. If I try a pdf preview in Lyx, I get an error and the
head of the protocol is:
This is pdfTeX, Version
On 15/01/2013 8:49 PM, Uwe Stöhr wrote:
Am 03.01.2013 13:13, schrieb Julien Rioux:
I have a weird problem...
I have install last version of lilypond and lyx, and try to compile
the lilypond
exemple in the LyX exemple folder.
One of the 2 current limitations of the LyX for Windows installer
On 18/01/2013 3:19 AM, Wolfgang Engelmann wrote:
Am Dienstag, 15. Januar 2013, 14:39:07 schrieb Wolfgang Engelmann:
Hi,
still not done with Vancouver style
I tried for quite some time but can't find the option for references, in
which more than 2 authors are referenced as
author1 et al
On 16/12/2012 4:48 PM, Maria Gouskova wrote:
On Wed, Nov 14, 2012 at 2:03 PM, Richard Heck rgh...@lyx.org wrote:
On 10/22/2012 04:19 PM, Maria Gouskova wrote:
Thanks, Richard--example file attached! It works when everything in
the preamble is commented out, but the endnote numbers appear as
801 - 900 of 1458 matches
Mail list logo