Re: Removing space to the margins in a table…
Am 15. Nov. 2021, 08:19 +0100 schrieb Daniel :
> On 2021-11-15 07:59, jezZiFeR wrote:
> > Am 15. Nov. 2021, 05:48 +0100 schrieb Daniel :
> >
> > On 2021-11-14 21:14, jezZiFeR wrote:
> >
> > Dear all,
> >
> > I use LyX 2.3.6.2 on OS 10.14.6 with Koma-script-book with
> > enumitem. Is
> > it possible to change the spacing to the margins (upwards,
> > downwards) in
> > the cells of a table? Could someone please tell me the corresponding
> > commands? Or do I have to proceed differently?
> >
> > Thanks, all best
> > Jess
> >
> >
> > Dear Jess,
> >
> > Are you looking to change the general spaces between rows? Then putting
> >
> > \renewcommand{\arraystretch}{}
> >
> > in your "Document" > "Settings" > "LaTeX Preamble" where is
> > some number. And there are more alternatives:
> > (https://tex.stackexchange.com/a/26692.
> >
> > All the best,
> > Daniel
> >
> >
> >
> > Dear Daniel,
> >
> > thanks for your quick help! It turned out, as far as I see, that the
> > problem with too large margins in cells only happens with itemize-style
> > (or enumerate). So I have to change the prefs of that style it seems.
> > How could I achieve this?
> >
> > All best
> > Jess
>
> Could you please send a short working example (.lyx file) to show the
> problem?
>
> Daniel
Yes, sure, here it is.
All best
Jess
test.lyx
Description: Binary data
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Removing space to the margins in a table…
Am 15. Nov. 2021, 05:48 +0100 schrieb Daniel :
> On 2021-11-14 21:14, jezZiFeR wrote:
> > Dear all,
> >
> > I use LyX 2.3.6.2 on OS 10.14.6 with Koma-script-book with enumitem. Is
> > it possible to change the spacing to the margins (upwards, downwards) in
> > the cells of a table? Could someone please tell me the corresponding
> > commands? Or do I have to proceed differently?
> >
> > Thanks, all best
> > Jess
>
> Dear Jess,
>
> Are you looking to change the general spaces between rows? Then putting
>
> \renewcommand{\arraystretch}{}
>
> in your "Document" > "Settings" > "LaTeX Preamble" where is
> some number. And there are more alternatives:
> (https://tex.stackexchange.com/a/26692.
>
> All the best,
> Daniel
Dear Daniel,
thanks for your quick help! It turned out, as far as I see, that the problem
with too large margins in cells only happens with itemize-style (or enumerate).
So I have to change the prefs of that style it seems. How could I achieve this?
All best
Jess
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Removing space to the margins in a table…
Dear all, I use LyX 2.3.6.2 on OS 10.14.6 with Koma-script-book with enumitem. Is it possible to change the spacing to the margins (upwards, downwards) in the cells of a table? Could someone please tell me the corresponding commands? Or do I have to proceed differently? Thanks, all best Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Multipage-tables
Hello, I use LyX 2.3.6.2 on MacOS 10.14.6 and Komscript report. Could someone please tell me to achieve that a table that is in a sliding object and rotated 90° can be displayed multi-page? I have checked this option in the table's settings dialogue, but it has no effect - I only ever get the middle part of the long table displayed, which protrudes from both the top and bottom of the sheet. These parts are then completely missing. I hope this is understandable - thank you very much! Best Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Itemized lists without indenting
Am 23. Okt. 2021, 20:34 +0200 schrieb Tobias Hilbricht : > Am Samstag, den 23.10.2021, 20:04 +0200 schrieb jezZiFeR: > > Dear Tobias, > > > > thanks! I have installed enumitem, but I do not know if I understand > > the (english) example file correctly. First I tried to do, what is > > written on the Tips-page you have mentioned, I am not sure, if the > > English word »Custom inset« is the same as »Benutzerdefinierte > > Aufzählung« or »Auflistungsoptionen« which I find in my German > > installation. > > Auflistungsoptionen / Aufzählungsoptionen / Beschreibungsoptionen > > > Nonetheless, with both of them it does not work, when I »pick an > > Enumerate environment, and immediately after the first list marker, > > right click to produce the context menu and« select one of them. > > Did you find enumitem-example.lyx ? Have a look at it in LyX, change > list parameters and compile and see, I attached it for your > convenience. > > Best wishes > Tobias Dear Tobias, yes, this is what I meant with »example-file«. In this file it worked from the beginning, and now it also works in mine, since I have also added leftmargin=*, which I found in the example-file. It evenworks inside a table. Thanks very much again, I am very confident. Best wishes Jess > > > Am 23. Okt. 2021, 15:56 +0200 schrieb Tobias Hilbricht < > > hilbri...@linopus.de>: > > > Am Samstag, den 23.10.2021, 12:00 +0200 schrieb jezZiFeR: > > > > Dear all, > > > > > > > > I use LyX 2.3.6.2 on OS 10.14.6 with Koma-script-book and would > > > > like > > > > to get rid of indentation in lists, whre each element normally is > > > > indented at left. Is there any possibility to do so? > > > > > > > > Thanks in advance, best > > > > Jess > > > > > > One way is to load the module enumitem (document -> settings -> > > > modules), then you can change among other things indentation. If > > > you > > > load the example file https://wiki.lyx.org/Tips/Enumitem then you > > > get a > > > user manual. Just change in the list options labelindent=\parindent > > > to > > > labelindent=0pt available after loading the enumitem module. > > > > > > Best wishes > > > Tobias > > > > > > -- > > > lyx-users mailing list > > > lyx-users@lists.lyx.org > > > http://lists.lyx.org/mailman/listinfo/lyx-users > > > > > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Itemized lists without indenting
Dear Tobias, thanks! I have installed enumitem, but I do not know if I understand the (english) example file correctly. First I tried to do, what is written on the Tips-page you have mentioned, I am not sure, if the English word »Custom inset« is the same as »Benutzerdefinierte Aufzählung« or »Auflistungsoptionen« which I find in my German installation. Nonetheless, with both of them it does not work, when I »pick an Enumerate environment, and immediately after the first list marker, right click to produce the context menu and« select one of them. I am not sure, where exactly I have to change the list options – directly in the list via ERT or in the preamble? As far as I see the user manual here: http://dante.ctan.org/CTAN/macros/latex/contrib/enumitem/enumitem.pdf does also not explain the usage of the package in LyX, or at least I don’t find it. Is my problem understandable? The English is confusing for me, when I want to find certain things and could not transplate 100%. Glad if you could give me a hint! All bes Jess Am 23. Okt. 2021, 15:56 +0200 schrieb Tobias Hilbricht : > Am Samstag, den 23.10.2021, 12:00 +0200 schrieb jezZiFeR: > > Dear all, > > > > I use LyX 2.3.6.2 on OS 10.14.6 with Koma-script-book and would like > > to get rid of indentation in lists, whre each element normally is > > indented at left. Is there any possibility to do so? > > > > Thanks in advance, best > > Jess > > One way is to load the module enumitem (document -> settings -> > modules), then you can change among other things indentation. If you > load the example file https://wiki.lyx.org/Tips/Enumitem then you get a > user manual. Just change in the list options labelindent=\parindent to > labelindent=0pt available after loading the enumitem module. > > Best wishes > Tobias > > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Itemized lists without indenting
Dear all, I use LyX 2.3.6.2 on OS 10.14.6 with Koma-script-book and would like to get rid of indentation in lists, whre each element normally is indented at left. Is there any possibility to do so? Thanks in advance, best Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: How to modify text alignment
Am 8. Sept. 2021, 11:57 +0200 schrieb Ricardo Berlasso : > > El mié, 8 sept 2021 a las 11:35, Dr Eberhard Lisse () > escribió: > > RTFM :-)-O > > Please, stop this. People come here for help, telling them to help themselves > is not helpful. In fact, RTMF non-answers are stupid, childish, and their > only effect is to scare newcomers. There is already too much poison in FOSS > community boards, let's keep at list this mailing list clean. > > > > > > el > > > > On 07/09/2021 18:37, jezZiFeR wrote: > > > Am 7. Sep. 2021, 15:55 +0200 schrieb Axel Dessecker > > > : > > > > > > Am Dienstag, 7. September 2021, 15:28:41 CEST schrieb jezZiFeR: > > > > > > Hello, > > > > > > in Komascript report, block text is specified as the default for > > >the text > > > alignment. How can I change this for the whole document? (LyX > > >2.3.6.2 on > > > OSX 10.14.6). If I try it just by edit/paragraph settings only > > >the current > > > paragraph is adjusted > > > > > > > > > Thank you > > > Jess > > > > > > > > > Jess, > > > > > > https://wiki.lyx.org/FAQ/TextAppearance > > > > > > Axel > > > > > > > > > > > > Dear Axel, > > > > > > thanks for your quick answer, this was helpful! > > > > > > All best > > > Jess > > > > > > > > > -- > > To email me replace 'nospam' with 'el' > > > > -- > > lyx-users mailing list > > lyx-users@lists.lyx.org > > http://lists.lyx.org/mailman/listinfo/lyx-users > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users This is not mentioned in the normal manual… Thanks anyhow. -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: How to modify text alignment
Am 7. Sep. 2021, 15:55 +0200 schrieb Axel Dessecker : > Am Dienstag, 7. September 2021, 15:28:41 CEST schrieb jezZiFeR: > > Hello, > > > > in Komascript report, block text is specified as the default for the text > > alignment. How can I change this for the whole document? (LyX 2.3.6.2 on > > OSX 10.14.6). If I try it just by edit/paragraph settings only the current > > paragraph is adjusted > > > > > > Thank you > > Jess > > Jess, > > https://wiki.lyx.org/FAQ/TextAppearance > > Axel > Dear Axel, thanks for your quick answer, this was helpful! All best Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
How to modify text alignment
Hello, in Komascript report, block text is specified as the default for the text alignment. How can I change this for the whole document? (LyX 2.3.6.2 on OSX 10.14.6). If I try it just by edit/paragraph settings only the current paragraph is adjusted Thank you Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: …dashed line…
Daniel, thank you! I will look into this later, because ERTs always takes time for me. I hope it will work then. All best Jess Am 3. Sep. 2021, 11:29 +0200 schrieb Daniel : > On 02/09/2021 17:38, jezZiFeR wrote: > > Hello, > > > > is there any way to use a dashed line rather than a solid one in > > formatting with LyX? Would be very helpful... > > I use LyX’ current version, Komascript report. > > > > Thanks a lot! > > Jess > > Hi Jess, > > I seem to remember that I looked into this as well some time ago and > thought about filing an enhancement request. Feel free to do so. > > In the meanwhile you would try the dashrule package > (https://www.ctan.org/tex-archive/macros/latex/contrib/dashrule) ans use > ERTs. > > Best, > Daniel > > > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
…dashed line…
Hello, is there any way to use a dashed line rather than a solid one in formatting with LyX? Would be very helpful... I use LyX’ current version, Komascript report. Thanks a lot! Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Placing bibliography on last page without page break / koma-script
Am 20. Aug. 2021, 12:37 +0200 schrieb Herbert Voss :
>
>
> Am 20.08.21 um 11:49 schrieb jezZiFeR:
> > Am 19. Aug. 2021, 11:26 +0200 schrieb Herbert Voss
> > :
> >
> >
> >
> > Am 19.08.21 um 11:22 schrieb jezZiFeR:
> >
> >
> > I also added
> >
> > \defbibheading{mybib}{%
> > \let\cleardoublepage\relax
> > …
> >
> > in the preamble and the parameter
> > heading=mybib
> > in the bibliography’s menu.
> >
> > Again I get a bunch of errors, added in the protocol here.
> >
> > Sorry, I do not get it, could you still help?
> >
> >
> > Create an _example_ document and send the lyx _and also_ the exported
> > latex file.
> >
> >
> >
> > here I send an example document with bib-file. I am not able to export
> > a latex-file (SigSev-error…), maybe I do something wrong, I am not sure.
>
> it is a one sided document, so we need clearpage instead of cleardoublepage.
> Attached your working example.
>
>
>
Dear Herbert,
thanks thanks thanks! Now it works fine.
Beste Grüße
Jess
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Placing bibliography on last page without page break / koma-script
Am 19. Aug. 2021, 11:26 +0200 schrieb Herbert Voss :
>
>
> Am 19.08.21 um 11:22 schrieb jezZiFeR:
> >
> > I also added
> >
> > \defbibheading{mybib}{%
> > \let\cleardoublepage\relax
> > …
> >
> > in the preamble and the parameter
> > heading=mybib
> > in the bibliography’s menu.
> >
> > Again I get a bunch of errors, added in the protocol here.
> >
> > Sorry, I do not get it, could you still help?
>
> Create an _example_ document and send the lyx _and also_ the exported
> latex file.
Dear Herbert,
here I send an example document with bib-file. I am not able to export a
latex-file (SigSev-error…), maybe I do something wrong, I am not sure.
Thanks again, all best
Test.lyx
Description: Binary data
Test.bib
Description: Binary data
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Placing bibliography on last page without page break / koma-script
Am 19. Aug. 2021, 11:06 +0200 schrieb Herbert Voss :
>
>
> Am 19.08.21 um 10:20 schrieb jezZiFeR:
> > Am 18. Aug. 2021, 19:28 +0200 schrieb Herbert Voss
> > :
> >
> > Am 18.08.21 um 18:03 schrieb jezZiFeR:
> >
> > thanks for the screenshots!
> > I have entered the lines you mentioned in the preamble.
> > Nonetheless
> > the menu looks different here, I add two screenshots also.
> > Could you
> > still help?
> >
> >
> > try to put it into "Optionen": heading=mybib
> >
> > I have no idea what version you are using.
> >
> > Herbert
> >
> >
> > Thanks again! I use LyX 2.3.6.2 and TeXLive 2021. When I enter the
> > line into »Optionen« I get a large amount of errors, which you could
> > find in the protocol (also XeTeX-version etc.) Maybe I should update
> > something?
>
> ---
> ! Undefined control sequence.
> l.161 \defbibheading
> {mybib}{%
> The control sequence at the end of
> ---
>
>
>
> It is a problem with LyX. It should load biblatex _before_ the user part of
> the preamble, but it did it afterwards. This is the reason why
> \defbibheading
> is unknown. As I already wrote, use
>
> \AtBeginDocument{%
> \defbibheading{mybib}{%
> .
> }}
Thanks again! I have now added:
\AtBeginDocument{%
\defbibheading{mybib}{%
…
in the preamble.
I removed, as I am not sure if this made problems:
\AtBeginDocument{
\addto\captionsgerman{
\renewcommand{\contentsname}{Inhalt}
}
}
I also added
\defbibheading{mybib}{%
\let\cleardoublepage\relax
…
in the preamble and the parameter
heading=mybib
in the bibliography’s menu.
Again I get a bunch of errors, added in the protocol here.
Sorry, I do not get it, could you still help?
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Placing bibliography on last page without page break / koma-script
Am 18. Aug. 2021, 19:28 +0200 schrieb Herbert Voss : > Am 18.08.21 um 18:03 schrieb jezZiFeR: > > thanks for the screenshots! > > I have entered the lines you mentioned in the preamble. Nonetheless > > the menu looks different here, I add two screenshots also. Could you > > still help? > > try to put it into "Optionen": heading=mybib > > I have no idea what version you are using. > > Herbert Thanks again! I use LyX 2.3.6.2 and TeXLive 2021. When I enter the line into »Optionen« I get a large amount of errors, which you could find in the protocol (also XeTeX-version etc.) Maybe I should update something? Protokoll.rtf Description: Binary data -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Placing bibliography on last page without page break / koma-script
Am 18. Aug. 2021, 17:54 +0200 schrieb Herbert Voss :
> jezZiFeR schrieb:
> > Am 18. Aug. 2021, 10:52 +0200 schrieb Herbert Voss
> > :
> > >
> > >
> > > Am 18.08.21 um 09:54 schrieb jezZiFeR:
> > > >
> > > > is there any possibility in koma-script-report to have the
> > > > bibliography (bib latex, biber) on the same page es the last
> > > > paragraph? I want to have a very short bibilography one the last page
> > > > and not to have a break and having those lines on a separate one.
> > >
> > > Write into the documents preamble:
> > >
> > > \defbibheading{mybib}{%
> > > \let\cleardoublepage\relax
> > > \chapter*{#1}%
> > > \markboth{#1}{#1}}
> > >
> > >
> > > and then use the parameter heading=mybib for the command
> > > \printbibliography
> > > Can be set in the menu of bibliography
> >
> > Thank you, Herbert! Up to now I am not very sure about whre to enter the
> > mentioned parameter heading=mybib. I normally insert the bibliography by
> > selecting insert (einfügen in German) / list (Liste) / bib
> > latex-bibliography (Biblatex-Literaturverzeichnis) and do not use the
> > mentioned command.
>
>
> Klick on the symbol in the document for bibiography or open its
> menu. I suppose that you have to use in the documents preamble:
>
> \AtBeginDocument{%
> \defbibheading{mybib}{%
> \let\cleardoublepage\relax
> \chapter*{#1}%
> \markboth{#1}{#1}}}
>
> because LyX loads biblatex after the documents preamble, which looks
> like a bug to me.
>
> Herbert
Dear Herbert,
thanks for the screenshots!
I have entered the lines you mentioned in the preamble. Nonetheless the menu
looks different here, I add two screenshots also. Could you still help?
Thank you!
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Placing bibliography on last page without page break / koma-script
Am 18. Aug. 2021, 10:52 +0200 schrieb Herbert Voss :
>
>
> Am 18.08.21 um 09:54 schrieb jezZiFeR:
> >
> > is there any possibility in koma-script-report to have the
> > bibliography (bib latex, biber) on the same page es the last
> > paragraph? I want to have a very short bibilography one the last page
> > and not to have a break and having those lines on a separate one.
>
> Write into the documents preamble:
>
> \defbibheading{mybib}{%
> \let\cleardoublepage\relax
> \chapter*{#1}%
> \markboth{#1}{#1}}
>
>
> and then use the parameter heading=mybib for the command \printbibliography
> Can be set in the menu of bibliography
Thank you, Herbert! Up to now I am not very sure about whre to enter the
mentioned parameter heading=mybib. I normally insert the bibliography by
selecting insert (einfügen in German) / list (Liste) / bib latex-bibliography
(Biblatex-Literaturverzeichnis) and do not use the mentioned command.
Thanks again…
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Placing bibliography on last page without page break / koma-script
Hello, is there any possibility in koma-script-report to have the bibliography (bib latex, biber) on the same page es the last paragraph? I want to have a very short bibilography one the last page and not to have a break and having those lines on a separate one. Best Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Format KOMA-Script-Book
Dear Andreas, I am not sure about that. What size of margis did you choose in document preferences / page margins? Do the margins not fit to the sizes you have entered? Did you change something in the preamble? All best Jess Am 20. Feb. 2021, 19:42 +0100 schrieb Andreas Plihal : > Hi, > > I am writing a book with LYX und choose KOMA-Script-Book and the paper size > A4. > > The result is that the printed A4 pages are only marginally full: a > right-hand page leaves 3 cm to the top margin, 5 cm to the right margin, 2,5 > cm to the left margin and 5,5 cm to the bottom margin. If I wanted to have > this book bound, the bookbinder would have to cut away a lot from the pile of > paper. > > What can I do to fix that problem? > > Best regards from > Andreas Plihal > -- > lyx-users mailing list > lyx-users@lists.lyx.org > http://lists.lyx.org/mailman/listinfo/lyx-users -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Changing colours of headings…
DEar Daniel,
thanks a lot, this works very well. I have also added the classoptions
dvipsnames to have more possibilities. You saved my day… :)
All best
Jess
Am 13. Feb. 2021, 15:26 +0100 schrieb Daniel :
> On 2021-02-13 10:04, jezZiFeR wrote:
> > Hello,
> >
> > could someone please help me - even though it may seem ridiculous - to
> > change the colour of the headings in »Koma Script Report«? I don't want
> > to use the text styles, as I want to use a different colour for all the
> > headings across the board, so the text styles don't help.
> >
> > Also the documentation and at
> > https://komascript.de <https://komascript.de>
> > do not help me either.
> >
> > Could someone please give me a hint?
> >
> > Thanks in advance, all best
> > Jess
> >
>
> How about something like
>
> \usepackage{xcolor}
> \addtokomafont{disposition}{\color{red}}
>
> in your latex preamble?
>
> Best,
> Daniel
>
> --
> lyx-users mailing list
> lyx-users@lists.lyx.org
> http://lists.lyx.org/mailman/listinfo/lyx-users
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Changing colours of headings…
Hello, could someone please help me - even though it may seem ridiculous - to change the colour of the headings in »Koma Script Report«? I don't want to use the text styles, as I want to use a different colour for all the headings across the board, so the text styles don't help. Also the documentation and at https://komascript.de do not help me either. Could someone please give me a hint? Thanks in advance, all best Jess -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Undefined control sequence
Am 13. Apr. 2020, 17:23 +0200 schrieb Paul A. Rubin :
> On 4/13/20 10:28 AM, jezZiFeR wrote:
> >
> > Am 13. Apr. 2020, 15:55 +0200 schrieb Kornel Benko :
> > > Am Mon, 13 Apr 2020 15:34:56 +0200
> > > schrieb jezZiFeR :
> > >
> > > > Hello,
> > > >
> > > > I get several »Undefined control sequence«-errors – could anybody
> > > > please tell me, what
> > > > the problem might be? I add a minimal example and hope it is useful.
> > > >
> > > > Thanks very much and well, happy Easter nonetheless, all best :)
> > > > Jess
> > > >
> > > >
> > > >
> > >
> > > Result:
> > > Cannot find '../Nextcloud/MaM/2020_MaM/Diss4.bib'!
> > > Changing to Minimal and selecting other font (Dejavu instead of non
> > > installed "Stempel
> > > Schneidler Std") I got no errors. This is with the master version of lyx
> > > (2.4).
> > >
> > > With the same modification also no problem on lyx 2.3.
> > >
> > > Kornel
> > >
> > > —
> >
> >
> >
> > Hello,
> >
> > thanks for your quick reply and sorry for not changing the path in the
> > document. I have now also changed the font now and have updated to 2.3.4.2
> > on OSX 10.14.6 – but still get those errors.
> >
> > I hope it is helpful, what is written in the error-description:
> > \select@language {german}
> > The control sequence at the end of the top line
> > of your error message was never \def'ed. If you have
> > misspelled it (e.g., `\hobx'), type `I' and the correct
> > spelling (e.g., `I\hbox'). Otherwise just continue,
> > and I'll forget about whatever was undefined.
> >
> > Thanks
> > Jess
> >
> Like Kornel, it compiles with no problems on my system (Linux Mint) after the
> changes he mentioned. From the error message, I wonder if babel cannot find a
> German language package. Which TeX system are you using? If TeXLive, do you
> have texlive-lang-german installed?
>
> Paul
>
> —
Dear Paul,
thanks! I still had TeXLive-2019 installed. After an update now things work
fine. But nonetheless: waht is tex live-lang-german? In TeX Live Utility I
could see I have TeX Live manual (German) installed. I suppose you mean this?
Best
Jess
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Undefined control sequence
Am 13. Apr. 2020, 15:55 +0200 schrieb Kornel Benko :
> Am Mon, 13 Apr 2020 15:34:56 +0200
> schrieb jezZiFeR :
>
> > Hello,
> >
> > I get several »Undefined control sequence«-errors – could anybody please
> > tell me, what
> > the problem might be? I add a minimal example and hope it is useful.
> >
> > Thanks very much and well, happy Easter nonetheless, all best :)
> > Jess
> >
> >
> >
>
> Result:
> Cannot find '../Nextcloud/MaM/2020_MaM/Diss4.bib'!
> Changing to Minimal and selecting other font (Dejavu instead of non installed
> "Stempel
> Schneidler Std") I got no errors. This is with the master version of lyx
> (2.4).
>
> With the same modification also no problem on lyx 2.3.
>
> Kornel
>
> —
Hello,
thanks for your quick reply and sorry for not changing the path in the
document. I have now also changed the font now and have updated to 2.3.4.2 on
OSX 10.14.6 – but still get those errors.
I hope it is helpful, what is written in the error-description:
\select@language {german}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Thanks
Jess
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Fwd: Undefined control sequence
Hello, I get several »Undefined control sequence«-errors – could anybody please tell me, what the problem might be? I add a minimal example and hope it is useful. Thanks very much and well, happy Easter nonetheless, all best :) Jess 2020-04-13_Minimal.lyx Description: Binary data Minimal.bib Description: Binary data -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users
Re: change text of TOC
Am 18. Dez. 2019, 12:55 +0100 schrieb Jürgen Spitzmüller :
> > Am Mi., 18. Dez. 2019 um 12:53 Uhr schrieb Jürgen Spitzmüller
> > :
> > > > According to the KOMA manual it should work (even without
> > > > \AtBeginDocument, which you normally need with LyX).
> >
> > But of course you need
> >
> > \addto\captions{…}
Yes, thank you, now it works. I have overlooked a percent-sign at the end of
the row.
Jess
> >
> > Jürgen
> >
> > > >
> > > > Jürgen
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: change text of TOC
Am 18. Dez. 2019, 10:28 +0100 schrieb Richard Kimberly Heck :
> On 12/18/19 4:04 AM, jezZiFeR wrote:
> > Dear all,
> >
> > I also try to reproduce this with KOMA-Script-report in German, but none of
> > the possibilites mentioned in the thread seem to work. The title of the TOC
> > keeps staying the same. Does this work differently in KOMA?
> I think what I suggested should also work here:
> \renewcommand\contentsname{What You Want}
This line also does not work for me.
> But it looks as if this might be deprecated in favor of something involving
> tocbasic.sty, which I've not investigated.
Do you maybe have a hint how to investigate here? For me such things still are
not easy.
> Remember: We can always look at the LaTeX files themselves (in this case,
> scrartcl.cls) to see how they work.
> Also: Please reply inline, not by top-posting.
Is this what you mean by replying inline? I am going to do that in the future,
even though for me top-posting is easier to overlook.
Thanks
Jess
> Riki
>
>
> >
> >
> >
> > Am 18. Dez. 2019, 05:44 +0100 schrieb Jürgen Spitzmüller :
> > > Am Dienstag, den 17.12.2019, 23:08 +0100 schrieb Ricardo Berlasso:
> > > > You can use Babel for this. For example, if your document is in
> > > > English, go to the preamble and write something like this
> > > >
> > > > \usepackage[english]{babel}
> > > > \addto\captionsenglish{
> > > > \renewcommand{\contentsname}{The New Name}
> > > > }
> > > >
> > > > For other languages you just need to change every "english" string
> > > > for the needed language. For example, in Spanish
> > > >
> > > > \usepackage[spanish]{babel}
> > > > \addto\captionsspanish{
> > > > \renewcommand{\contentsname}{El nuevo título}
> > > > }
> > >
> > > Since babel is automatically loaded by LyX (but usually after the user
> > > preamble) I'd rather do
> > >
> > > \AtBeginDocument{%
> > > \addto\captionsenglish{
> > > \renewcommand{\contentsname}{The New Name}
> > > }
> > > }
> > >
> > > Cf. https://wiki.lyx.org/FAQ/Unsorted#renameEnv
> > >
> > > Jürgen
> > >
> > > --
> > > lyx-users mailing list
> > > lyx-users@lists.lyx.org
> > > http://lists.lyx.org/mailman/listinfo/lyx-users
> >
>
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: change text of TOC
Dear all,
I also try to reproduce this with KOMA-Script-report in German, but none of the
possibilites mentioned in the thread seem to work. The title of the TOC keeps
staying the same. Does this work differently in KOMA?
Thanks
Jess
Am 18. Dez. 2019, 05:44 +0100 schrieb Jürgen Spitzmüller :
> Am Dienstag, den 17.12.2019, 23:08 +0100 schrieb Ricardo Berlasso:
> > You can use Babel for this. For example, if your document is in
> > English, go to the preamble and write something like this
> >
> > \usepackage[english]{babel}
> > \addto\captionsenglish{
> > \renewcommand{\contentsname}{The New Name}
> > }
> >
> > For other languages you just need to change every "english" string
> > for the needed language. For example, in Spanish
> >
> > \usepackage[spanish]{babel}
> > \addto\captionsspanish{
> > \renewcommand{\contentsname}{El nuevo título}
> > }
>
> Since babel is automatically loaded by LyX (but usually after the user
> preamble) I'd rather do
>
> \AtBeginDocument{%
> \addto\captionsenglish{
> \renewcommand{\contentsname}{The New Name}
> }
> }
>
> Cf. https://wiki.lyx.org/FAQ/Unsorted#renameEnv
>
> Jürgen
>
> --
> lyx-users mailing list
> lyx-users@lists.lyx.org
> http://lists.lyx.org/mailman/listinfo/lyx-users
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Re: Exporting ePub / XML: always SIGSEV
Dear Eberhard, thanks very much for the promising hint and sorry for answering late: I am still trying to understand lwarp. It is already installed, and also the lwarpmk utility is set up, but I think I need a little time to get through this. I will give you a feedback when I have got it. All best Jess Am 27. Apr. 2019, 16:49 +0200 schrieb Dr Eberhard Lisse : > Have you looked at lwarp on CTAN? > > el > > On 2019-04-26 19:48 , jezZiFeR wrote: > > Dear Anders, > > > > thank you so much! I have now found a possibility to use ePub. It is > > still not perfect and up to now is not useful for publishing etc., but > > for private use it is fine. The following seems to work for me: > > > > export–LyXhtml (here LyX is not getting a SIGSEV) > > then I convert the XHTML-file in Calibre to ePub > > > > Calibre is really extremely useful… I think I will try a little bit > > around with LyX and Calibre in the next time, but for the moment this > > works for me. > > > > All best > > Jess >
Re: Exporting ePub / XML: always SIGSEV
Dear Anders, thank you so much! I have now found a possibility to use ePub. It is still not perfect and up to now is not useful for publishing etc., but for private use it is fine. The following seems to work for me: export–LyXhtml (here LyX is not getting a SIGSEV) then I convert the XHTML-file in Calibre to ePub Calibre is really extremely useful… I think I will try a little bit around with LyX and Calibre in the next time, but for the moment this works for me. All best Jess Am 25. Apr. 2019, 21:53 +0200 schrieb Anders Ekberg : > On 25 Apr 2019, at 21:36, jezZiFeR wrote: > > > > Hello Anders, > > > > thanks a lot! This sounds good, but I do normally only use LyX and run into > > new problems. First I tried several possibilities to export to TeX is with > > also with »weitere Formate und Optionen« (more formats and options) – here > > it worked. In all other cases (file – export – LaTeX (plain) or export – > > export as – LaTeX (normal) or export – export as – LaTeX (XeTeX)) I have > > got a SIGSEV-signal again. > > > > Well, then I opened the TeX-file in TeXShop (I dont have TeX Studio). In > > the prefs there is no build, and I did not know ho to continue from here. > > Then I just tried: > > > > export – XML text > > > > This produced an XML-file. I do not know if the file would work, because I > > do not know how to continue from here. Did Could I also use calibre for > > converting from XML to ePub? > > > > Thanks, best > > Jess > > Looks like you have a problem with your installation. I would try to > reinstall (and if problems remain to a Tools > Reconfigure and open Terminal > and run sudo texhash). > Anyway, to your question: Calibre is free to download, so you can download it > and then add the xml-file to Calibre (Add book…) and then convert to EPUB > (Convert books…). If it works or not should depend on the status the > XML-file, but that is outside my knowledge (I was just happy when the recipe > I posted worked ;-) > > All the best! > Anders >
Re: Exporting ePub / XML: always SIGSEV
Dear Stephan, thank you, I continue finding workarounds, at least this now only happens if I try to export via »export as«. The other possibilities seem to work though. All best Jess Am 26. Apr. 2019, 10:52 +0200 schrieb Stephan Witt : > Am 26.04.2019 um 10:28 schrieb jezZiFeR : > > > > Dear Stephan, > > > > hm, now I have got a SIGSEV-signal again and could reproduce it every time > > I use the dialogue with »export as«, like this: > > > > file–export–export as > > > > I get the message, that there are no information to export to the chosen > > format: > > »Keine Informationen vorhanden, um das Format HTML zu exportieren.« > > and the SIGSEV-error-message. So this time I could send the stack trace, > > see below. > > Dear Jess, > > thank you for it. Of course it looks like garbage for mere mortal people. :) at least i could find the lyx–frontend–action–action in line 6… :) > > If I try to interpret it I can see in line (6) our code is involved the last > time before the crash. Here the method named lyx::frontend::Action::action is > called and this method does nearly nothing except calling some configured > method indirectly. A crash here means the internal memory structures of the > running LyX got corrupted at some point in time before. Unfortunately these > things happen unnoticed at the time the code to blame is executed. Probably > there is some memory passed back to the OS too early. > > So, I don’t have a solution for this crash. But it’s almost sure it’s > unrelated with the availability of the export function. > > Best regards, > Stephan > > > > > Thanks in advance, all best > > Jess > > > > > > > > — > > > > ( 1) 1 lyx 0x00010560d5d6 > > _ZN3lyx8frontend5Alert7doErrorERKNSt3__112basic_stringIwNS2_11char_traitsIwEENS2_9allocatorIwSA_b > > : 1 lyx 0x00010560d5d6 > > _ZN3lyx8frontend5Alert7doErrorERKNSt3__112basic_stringIwNS2_11char_traitsIwEENS2_9allocatorIwSA_b > > + 199 > > ( 2) 2 lyx 0x00010560d9e1 > > _ZN3lyx8frontend5Alert5errorERKNSt3__112basic_stringIwNS2_11char_traitsIwEENS2_9allocatorIwSA_b > > : 2 lyx 0x00010560d9e1 > > _ZN3lyx8frontend5Alert5errorERKNSt3__112basic_stringIwNS2_11char_traitsIwEENS2_9allocatorIwSA_b > > + 135 > > ( 3) 3 lyx 0x0001053a71ce _ZN3lyxL13error_handlerEi : 3 lyx > > 0x0001053a71ce _ZN3lyxL13error_handlerEi + 603 > > ( 4) 4 libsystem_platform.dylib 0x7fff5d488b3d _sigtramp : 4 > > libsystem_platform.dylib 0x7fff5d488b3d _sigtramp + 29 > > ( 5) 5 libsystem_malloc.dylib 0x7fff5d44c807 malloc_zone_malloc : 5 > > libsystem_malloc.dylib 0x7fff5d44c807 malloc_zone_malloc + 103 > > ( 6) 6 lyx 0x0001055f60aa _ZN3lyx8frontend6Action6actionEv : 6 lyx > > 0x0001055f60aa _ZN3lyx8frontend6Action6actionEv + 74 > > ( 7) 7 QtCore 0x000106789ab9 _ZN11QMetaObject8activateEP7QObjectiiPPv : > > 7 QtCore 0x000106789ab9 _ZN11QMetaObject8activateEP7QObjectiiPPv + 3113 > > ( 8) 8 QtWidgets 0x000106bce457 _ZN7QAction8activateENS_11ActionEventE > > : 8 QtWidgets 0x000106bce457 _ZN7QAction8activateENS_11ActionEventE + > > 263 > > ( 9) 9 QtCore 0x000106789ab9 _ZN11QMetaObject8activateEP7QObjectiiPPv : > > 9 QtCore 0x000106789ab9 _ZN11QMetaObject8activateEP7QObjectiiPPv + 3113 > > ( 10) 10 QtCore 0x000106781ac1 _ZN7QObject5eventEP6QEvent : 10 QtCore > > 0x000106781ac1 _ZN7QObject5eventEP6QEvent + 801 > > ( 11) 11 QtWidgets 0x000106bd7dfd > > _ZN19QApplicationPrivate13notify_helperEP7QObjectP6QEvent : 11 QtWidgets > > 0x000106bd7dfd > > _ZN19QApplicationPrivate13notify_helperEP7QObjectP6QEvent + 301 > > ( 12) 12 QtWidgets 0x000106bd9177 > > _ZN12QApplication6notifyEP7QObjectP6QEvent : 12 QtWidgets > > 0x000106bd9177 _ZN12QApplication6notifyEP7QObjectP6QEvent + 391 > > ( 13) 13 lyx 0x00010561cb6b > > _ZN3lyx8frontend14GuiApplication6notifyEP7QObjectP6QEvent : 13 lyx > > 0x00010561cb6b > > _ZN3lyx8frontend14GuiApplication6notifyEP7QObjectP6QEvent + 21 > > ( 14) 14 QtCore 0x000106757be4 > > _ZN16QCoreApplication15notifyInternal2EP7QObjectP6QEvent : 14 QtCore > > 0x000106757be4 _ZN16QCoreApplication15notifyInternal2EP7QObjectP6QEvent > > + 164 > > ( 15) 15 QtCore 0x000106758d6b > > _ZN23QCoreApplicationPrivate16sendPostedEventsEP7QObjectiP11QThreadData : > > 15 QtCore 0x000106758d6b > > _ZN23QCoreApplicationPrivate16sendPostedEventsEP7QObjectiP11QThreadData + > > 891 > > ( 16) 16 libqcocoa.dylib 0x00
Re: Exporting ePub / XML: always SIGSEV
( 29) 29 libqcocoa.dylib 0x00010925f73d _ZN21QCocoaEventDispatcher13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE : 29 libqcocoa.dylib 0x00010925f73d _ZN21QCocoaEventDispatcher13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE + 2445 ( 30) 30 QtCore 0x0001067536e1 _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE : 30 QtCore 0x0001067536e1 _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE + 417 ( 31) 31 QtCore 0x000106758288 _ZN16QCoreApplication4execEv : 31 QtCore 0x000106758288 _ZN16QCoreApplication4execEv + 392 ( 32) 32 lyx 0x0001053a2841 _ZN3lyx3LyX4execERiPPc : 32 lyx 0x0001053a2841 _ZN3lyx3LyX4execERiPPc + 1009 ( 33) 33 lyx 0x000105284d1f main : 33 lyx 0x000105284d1f main + 79 ( 34) 34 libdyld.dylib 0x7fff5d29ded9 start : 34 libdyld.dylib 0x7fff5d29ded9 start + 1 Am 25. Apr. 2019, 22:50 +0200 schrieb Stephan Witt : > Am 25.04.2019 um 22:14 schrieb jezZiFeR : > > > > Dear Stephan, > > > > with the tutorial it seems that I also do not get a SIGSEV in some cases, > > but I also get it when I go via: > > file–export–export as… > > > > When I tried this for.html I also got this message: »Kann keinen > > LaTeX-Befehl für das Zeichen '⌃' (Code-Punkt 0x2303) finden. > > Einige Zeichen Ihres Dokuments sind mit der gewählten Kodierung > > wahrscheinlich nicht darstellbar. > > Eine Änderung der Dokumentkodierung auf 'utf8' könnte helfen.« > > > > This means something like the is no LaTeX-command for »^« and it is > > suggested to change the document’s coding to utf 8, which is not possible > > for the tutorial-file. > > Yes, this is a problem with the tutorial in LyX 2.3.2 and will be fixed in > 2.3.3. > > > > > Maybe it is interesting, that the dialogue of two different documents (mine > > & German tutorial) produce different export-possibilities and the tutorial > > has much more. I add two screenshots to make it clearer. > > Hmmm, the export possibilities efficiently depend on the existing converters. > The longer list doesn’t necessarily mean more possibilities… I don’t know > off-hand how the lists are constructed and why they contain useless entries. > > > > > Excuse me, what is the »sack trace«? Should I send you the details of the > > SIGSEV? > > Yes, please. > > Best regards, > Stephan > > > I will continue trying some more documents tomorrow. > > > > Thank you, all best > > Jess > > > > > > > > > > > > > > > > Am 25. Apr. 2019, 21:52 +0200 schrieb Stephan Witt : > > > Am 25.04.2019 um 18:56 schrieb jezZiFeR : > > > > > > > > Hello, > > > > > > > > I try to export ePubs for a while now and it never worked in different > > > > configurations. LyX was always freezing. In the moment I use OS > > > > 10.14.3, Intel and LyX 2.3.2 with TeXLive 2018. > > > > > > > > When I do the following: > > > > + file – export as – DocBook (XML) and then try to save I get the > > > > follwing error: > > > > »Keine Informationen vorhanden, um das Format DocBook (XML) zu > > > > exportieren.« > > > > In English this means something like »There is no information to export > > > > the format DocBook (XML). > > > > + Now I click »cancel« and get a SIGSEV-signal, like every time. > > > > > > > > Does anybody have a hint what I could do? Would be very good to use > > > > XML, maybe there is a workaround. > > > > > > > > Thanks, all best > > > > Jess > > > > > > Hello Jess, > > > > > > I’m on Mac OS 10.14.4 with LyX 2.3.2. I’m unable to export to DocBook > > > too. But - at least with the Tutorial - I don’t get a crash on Cancel. > > > > > > Can you send me the stack trace please and tell me if it happens with > > > every LyX document or with some of your documents only? > > > > > > Best regards, > > > Stephan > > > 22.04.20.png> >
Re: Exporting ePub / XML: always SIGSEV
Dear Stephan, this is strange, I now could not reproduce the SIGSEV anymore, which I have always got over the last months. I could also not find out, what I might have changed. The only thing is that I removed the TeX 2017-version meanwhile, but I used 2018 anyhow. This is why I do not think, that this might affect this, but it is the only thing I really changed. I have tried it with different documents. But still it is not possible to build an XML etc. If I try to do this via export as I still get those messages for any format: »Keine Informationen vorhanden, um das Format OpenDocument (Pandoc) zu exportieren.« »Keine Informationen vorhanden, um das Format HTML (MS Word) zu exportieren.« »Keine Informationen vorhanden, um das Format HTML (MS Word) zu exportieren.« So: there is no information to export to format X, but at least i do not get the SIGSEV anymore. If I get the SIGSEV again later, I will send you the stack trace then. Best Jess Am 25. Apr. 2019, 22:50 +0200 schrieb Stephan Witt : > Am 25.04.2019 um 22:14 schrieb jezZiFeR : > > > > Dear Stephan, > > > > with the tutorial it seems that I also do not get a SIGSEV in some cases, > > but I also get it when I go via: > > file–export–export as… > > > > When I tried this for.html I also got this message: »Kann keinen > > LaTeX-Befehl für das Zeichen '⌃' (Code-Punkt 0x2303) finden. > > Einige Zeichen Ihres Dokuments sind mit der gewählten Kodierung > > wahrscheinlich nicht darstellbar. > > Eine Änderung der Dokumentkodierung auf 'utf8' könnte helfen.« > > > > This means something like the is no LaTeX-command for »^« and it is > > suggested to change the document’s coding to utf 8, which is not possible > > for the tutorial-file. > > Yes, this is a problem with the tutorial in LyX 2.3.2 and will be fixed in > 2.3.3. > > > > > Maybe it is interesting, that the dialogue of two different documents (mine > > & German tutorial) produce different export-possibilities and the tutorial > > has much more. I add two screenshots to make it clearer. > > Hmmm, the export possibilities efficiently depend on the existing converters. > The longer list doesn’t necessarily mean more possibilities… I don’t know > off-hand how the lists are constructed and why they contain useless entries. > > > > > Excuse me, what is the »sack trace«? Should I send you the details of the > > SIGSEV? > > Yes, please. > > Best regards, > Stephan > > > I will continue trying some more documents tomorrow. > > > > Thank you, all best > > Jess > > > > > > > > > > > > > > > > Am 25. Apr. 2019, 21:52 +0200 schrieb Stephan Witt : > > > Am 25.04.2019 um 18:56 schrieb jezZiFeR : > > > > > > > > Hello, > > > > > > > > I try to export ePubs for a while now and it never worked in different > > > > configurations. LyX was always freezing. In the moment I use OS > > > > 10.14.3, Intel and LyX 2.3.2 with TeXLive 2018. > > > > > > > > When I do the following: > > > > + file – export as – DocBook (XML) and then try to save I get the > > > > follwing error: > > > > »Keine Informationen vorhanden, um das Format DocBook (XML) zu > > > > exportieren.« > > > > In English this means something like »There is no information to export > > > > the format DocBook (XML). > > > > + Now I click »cancel« and get a SIGSEV-signal, like every time. > > > > > > > > Does anybody have a hint what I could do? Would be very good to use > > > > XML, maybe there is a workaround. > > > > > > > > Thanks, all best > > > > Jess > > > > > > Hello Jess, > > > > > > I’m on Mac OS 10.14.4 with LyX 2.3.2. I’m unable to export to DocBook > > > too. But - at least with the Tutorial - I don’t get a crash on Cancel. > > > > > > Can you send me the stack trace please and tell me if it happens with > > > every LyX document or with some of your documents only? > > > > > > Best regards, > > > Stephan > > > 22.04.20.png> >
Re: Exporting ePub / XML: always SIGSEV
Hello Anders,
thanks a lot! This sounds good, but I do normally only use LyX and run into new
problems. First I tried several possibilities to export to TeX is with also
with »weitere Formate und Optionen« (more formats and options) – here it
worked. In all other cases (file – export – LaTeX (plain) or export – export as
– LaTeX (normal) or export – export as – LaTeX (XeTeX)) I have got a
SIGSEV-signal again.
Well, then I opened the TeX-file in TeXShop (I dont have TeX Studio). In the
prefs there is no build, and I did not know ho to continue from here.
Then I just tried:
export – XML text
This produced an XML-file. I do not know if the file would work, because I do
not know how to continue from here. Did Could I also use calibre for converting
from XML to ePub?
Thanks, best
Jess
Am 25. Apr. 2019, 20:55 +0200 schrieb Anders Ekberg :
>
> 25 apr. 2019 kl. 18:56 skrev jezZiFeR :
>
> > Hello,
> >
> > I try to export ePubs for a while now and it never worked in different
> > configurations. LyX was always freezing. In the moment I use OS 10.14.3,
> > Intel and LyX 2.3.2 with TeXLive 2018.
> >
> > When I do the following:
> > + file – export as – DocBook (XML) and then try to save I get the follwing
> > error:
> > »Keine Informationen vorhanden, um das Format DocBook (XML) zu exportieren.«
> > In English this means something like »There is no information to export the
> > format DocBook (XML).
> > + Now I click »cancel« and get a SIGSEV-signal, like every time.
> >
> > Does anybody have a hint what I could do? Would be very good to use XML,
> > maybe there is a workaround.
> >
> > Thanks, all best
> > Jess
>
> Also on Mac. I never really got the XML to work. So unfortunately no
> workaround. Instead I use
>
> \usepackage{pxfonts} in preamble
> Pictures as eps
> No non-standard letters in picture names etc
> Export to plain tex
> Open in TeX-studio
> Create user-command htlatex %.tex (in Preferences > Build)
> Add html-file to Calibre (Add book...)
> Convert to EPUB (Convert books...)
>
> Has worked very well also for complex documents.
>
> /Anders
Exporting ePub / XML: always SIGSEV
Hello, I try to export ePubs for a while now and it never worked in different configurations. LyX was always freezing. In the moment I use OS 10.14.3, Intel and LyX 2.3.2 with TeXLive 2018. When I do the following: + file – export as – DocBook (XML) and then try to save I get the follwing error: »Keine Informationen vorhanden, um das Format DocBook (XML) zu exportieren.« In English this means something like »There is no information to export the format DocBook (XML). + Now I click »cancel« and get a SIGSEV-signal, like every time. Does anybody have a hint what I could do? Would be very good to use XML, maybe there is a workaround. Thanks, all best Jess
Re: BibDesk / Biblatex
Dear Jürgen, thanks – this helps a lot! And the resource is really comprehensive… All best Jess Am 20. Feb. 2019, 08:56 +0100 schrieb Jürgen Spitzmüller : > Am Mittwoch, den 20.02.2019, 08:02 +0100 schrieb jezZiFeR: > > But I still have found no suction for accents, I still do not know > > e.g. how to enter > > > símbolos > > s\'imbolos > > The most comprehensive resource for these kinds of questions is > https://ctan.org/pkg/comprehensive > > HTH > Jürgen
BibDesk / Biblatex
Hello, I have a question regarding BibDesk / BibTeX and hope that someone here could help. I use BibDesk with Unicode / UTF-8 and Biblatex / biber in LyX. So far things work fine, but sometimes I have some trouble to use special signs. No problem is e.g. the swung dash. For that I enter characters like this: > Espa\~na in BibDesk. But I still have found no suction for accents, I still do not know e.g. how to enter > símbolos I have also looked on this site: https://www.namsu.de/Extra/strukturen/Sonderzeichen2.html but did not find a proper solution. Thanks for any hint or help Jess
Italics for titles in references
Hello, I use OSX 10.13.6, LyX 2.3.2 and KomaScript report and would like to use italics in the references (footnotes and bibliography). Could somebody please tell me a proper way how to achieve this? I need this for the format »chapter«, the title and book title in »incollection«, the title in »inbook« and citetitle. I hope it is clear, what I mean, otherwise I would try to describe otherwise. Thanks for your help Jess
Re: Statistics in LyX
Dear Daniel, thanks for your comments and agreeing with the benefit of such a function. I was not sure, if maybe there is a solution to fulfill this with the recent version of LyX somehow. Thank you also for making clear, that there is not another possibility at present. For some time I have used Scrivener, which has an extreme good statistics-function, which is also able to set targets (session, word or character) and to also select the whole text or just sections out of it. This was so comfortable, that the procedure you described (keeping track of the differences manually, also section wise, by checking before and after) seems so ineffective, that I normally resign. But well: will have to be disciplined and write an enhancement request, good idea! All best Jess Am 11. Dez. 2018, 21:15 +0100 schrieb Daniel : > On 11/12/2018 10:38, jezZiFeR wrote: > > Hello, > > > > is there any possibility to keep the window of tools/statistics opened > > while working in LyX (I use 2.3.1.-1 on OSX10.13.6)? This woulöd be so > > comfortable. Even better would be a possibility to document the daily > > progress. There is no such function, or am I wrong? > > Thanks, all best > > Jess > > > > Hi, > > Its not possible because the window is modal > (https://en.wikipedia.org/wiki/Modal_window). I think this could be > easily changed but that's not enough since it would not be updated > automatically. But I guess that's not that tricky to implement either. > > LibreWriter, for example, shows the word count in the status bar. That > might be another solution. Why this is not implemented in LyX might be > because the word count - unlike in LibreWriter - is just a rough > estimate of the word count in the type setted version. > > However, I agree that it would be great if LyX kept track of the number > of words written since the file was last opened, or a counter reset, or > so. You can file an enhancement request at > https://www.lyx.org/trac/wiki/BugTrackerHome. > > For now, you need to keep track of the differences manually by checking > once before and after your work is "done" > > Daniel >
Statistics in LyX
Hello, is there any possibility to keep the window of tools/statistics opened while working in LyX (I use 2.3.1.-1 on OSX10.13.6)? This woulöd be so comfortable. Even better would be a possibility to document the daily progress. There is no such function, or am I wrong? Thanks, all best Jess
split view with two different documents / how to open easily
Dear list, hello, I wonder if there ist a possibility, that LyX opens two documents more easily than the following procedure, I do at least daily to get a split view (divide view in left and right) with two different documents. I use OSX10.13.6 and LyX 2.3.1-1. • open LyX • one of the two lastly used documents is opened • I choose view/divide view into left and right (sorry, might only be analogous as I use LyX in German) • I open the second document, which opens in a separate window • I click into the divided document and open the second document again Now I have the desired split view with two different documents, while the second one also stays opened in the background. Thanks for help Jess
Re:
Dear Eberhard
Thanks for this very good hint! Have noted this method just in case…
Best
Jess
Am 11. Nov. 2018, 10:04 +0100 schrieb Dr Eberhard W Lisse :
> Jess,
>
> also do something like
>
> tlmgr list --only-installed|awk '{print $2}'|sed s/://g > tl.2018-11-10
>
> if yuo were to inadvertently remove your "current" TL version, after
> reinstallation of TL you can run
>
> tlmgr install $(cat tl.2018-11-10)
>
> which will not re-install existing packages, but any you have previously
> installed additionally with tlmgr or the Tex Live Manager tool will be.
>
> I use MacTeX Basic and ths method and thus save a few GB :-)-O
>
> el
>
>
> On 2018-11-11 08:47 , jezZiFeR wrote:
> > Hello,
> >
> > yes, I am sure, because I have installed 2016, 2017 and 2018 and now
> > just kept 2017 and 18. Thanks for the terminal commands, which
> > showed, that the newer one was used.
> >
> > Best
> > Jess
Re: Deleting old MacTex-version…
Hello, yes, I am sure, because I have installed 2016, 2017 and 2018 and now just kept 2017 and 18. Thanks for the terminal commands, which showed, that the newer one was used. Best Jess Am 10. Nov. 2018, 14:55 +0100 schrieb Dr Eberhard Lisse : > Are you sure? > > Having both installed does not guarantee the newer one is used, though > it usually is. > > On terminal run > > ls -las /Library/TeX/Distributions/.DefaultTeX/ > > whih should result in something like > > [...] Contents -> ../TeXLive-2018-Basic.texdist/Contents > > if that is the case you can run > > open /usr/local/texlive/ > > and drag 2016* to the trashbin > > or run > > sudo rm -rf /usr/local/texlive/2016* > > > Of course after having made a backup... > > el > > > On 2018-11-09 13:33 , jezZiFeR wrote: > > Hello, > > > > I hope somebody could answer a question related to MacTex / texlive. > > Could I delete the version of 2016 just by deleting /2016 in the > > teelive-folder? I use 2018 now. > > > > Thank you! > > Jess
Re: Biblatex in LyX 2.3 and newer
Dear Daniel, yes, I thought that the problems I have are a biblatex-problem, because it happened when I installed LyX 2.3. The other packages I now deactivated were working fine before, so I am still not sure, what exactly the problem might be – all of those error messages seemed to have startet at the same point. I will try some things and most probably make another minimal-example. Thanks also for your minimal-example, this is obvious. Best Jess Am 10. Nov. 2018, 12:32 +0100 schrieb Daniel : > Dear Jess, > > Your question was about biblatex that is what I concentrated on. If > there are other problems try to produce a minimal example that shows > these other errors. > > On 10/11/2018 08:34, jezZiFeR wrote: > > And also, why do I have to remove the > > > > pageref=true > > > > option from biblatex? > I might be wrong but pageref=true does not seem to be a valid biblatex > option. Attached is a minimal example to show it. Remove pageref=true > from the biblatex options in this example and it should work fine. > > Best, > Daniel
Re: Biblatex in LyX 2.3 and newer
Dear Daniel,
thank you for trying my file out. Okay, the file is not minimal enough, so I
removed the list of figures and also the footnote with the missing reference.
There is no reason, why I once added the page numbers as part of the citation,
once not. That might be the result of trying out how to get a decent distance
between »S.« and the number.
I now also erased some of the lines in the preamble that do not correspond to
biblatex. It was obvious, that most of the errors were caused by the line:
\DeclareFieldFormat{title}{\mkbibemph{#1}}
which I have added italic fonts in titles. Is there also another achieve that?
Also the lines:
\urlstyle{%}
\usepackage{%}
\begin{%}
caused some errors – do I really have to remove all of them? Is there is one
obvious reason for this?
And also, why do I have to remove the
pageref=true
option from biblatex?
I add a minimal example this time which I think is really minimal, in a working
form. I left the mentioned lines in the preamble, deactivated.
Thank you, best,
Jess
Am 10. Nov. 2018, 02:51 +0100 schrieb Daniel :
> On 09/11/2018 19:39, jezZiFeR wrote:
> > Hello,
> >
> > I do not get Biblatex working correctly since using LyX 2.3 on
> > OSX10.13.6, I get a lot of errors and am not sure about the changes I
> > have made in the preferences and in the preamble. I tried to follow
> > these descriptions:
> > https://wiki.lyx.org/BibTeX/Biblatex#toc2
> >
> > It seems I did not do that correctly… What did I do wrong? I add a
> > minimal example here.
> >
> > Thanks for help
> > Jess
>
> Hi
>
> It is a bit hard to say what might cause your errors. There are three
> references and some text in your document. If you remove any of those
> your error disappears? If not, then the attached is not a minimal example.
>
> After removing the a bit strange looking preamble (which seems to have
> nothing to do with biblatex if I saw it correctly) and the
> "pageref=true" option from biblatex, I could typeset the document
> without problems on Windows 10.
>
> One of the references was not in the attached bib file though. Although,
> is there a reason some of the page numbers were part of the citation and
> some not?
>
> Best,
> Daniel
>
Minimal.bib
Description: Binary data
Minimal.lyx
Description: Binary data
Biblatex in LyX 2.3 and newer
Hello, I do not get Biblatex working correctly since using LyX 2.3 on OSX10.13.6, I get a lot of errors and am not sure about the changes I have made in the preferences and in the preamble. I tried to follow these descriptions: https://wiki.lyx.org/BibTeX/Biblatex#toc2 It seems I did not do that correctly… What did I do wrong? I add a minimal example here. Thanks for help Jess Minimal.lyx Description: Binary data Diss4.bib Description: Binary data
Deleting old MacTex-version…
Hello, I hope somebody could answer a question related to MacTex / texlive. Could I delete the version of 2016 just by deleting /2016 in the teelive-folder? I use 2018 now. Thank you! Jess
Re: Fwd: How to suppress branches in the index
Yes, thanks for asking, that's what I'm talking about – about the outline. As I use it for an overview of my outlines, those entries, which are even inactive inside of inactive branches, are somehow disturbing for me. As soon as I remove the branch they are not shown any longer, only if they are inside of an inactive branch. This makes no sense for me. Well, if there really is no way I would have to use a seperate outlining-app. Thanks Jess Am 2. Sep. 2018, 16:44 +0200 schrieb Scott Kostyshak : > On Sun, Sep 02, 2018 at 09:18:55AM +0200, jezZiFeR wrote: > > Hello, > > is there a possibility in Lyx 2.3.0 / OS to suppress branches in the index? > > I would like to not show every single section of the branches in the index, > > but I did not find the possibility to change that behaviour. Is there any > > solution? > > Are you talking about the outline? (the thing on the left you can use > for navigation) If so, I don't think there is a way. But I'm not sure, > so perhaps someone will correct me. > > Scott
Fwd: How to suppress branches in the index
Hello, is there a possibility in Lyx 2.3.0 / OS to suppress branches in the index? I would like to not show every single section of the branches in the index, but I did not find the possibility to change that behaviour. Is there any solution? Thank you, all best Jess
Re: How to get rid of indentation in footnote
Dear Jürgen,
thanks, this also works. For me it is not that easy to have a good orientation
in the manual, but thank you for the hint nonetheless. I hope to get this
better one day…
Best
Jess
On 3. Apr. 2018, 13:04 +0200, Jürgen Spitzmüller , wrote:
> > 2018-04-03 10:08 GMT+02:00 jezZiFeR :
> > > Hello,
> > >
> > > could somebody please help: how could I get rid of the indentation of
> > > footnotes in the first line of the footer? I want every footnote to begin
> > > at the margin without indentation. I use KOMA-script-report in LyX 2.3.0.
> > > Please let me know if you need a screenshot.
> >
> > \deffootnote{1.5em}{1em}{%
> > \makebox[1.5em][l]{\thefootnotemark}%
> > }
> >
> > See KOMA-Script manual.
> >
> > Jürgen
> >
> >
> > >
> > > Thanks
> > > Jess
> > >
>
Re: How to get rid of indentation in footnote
Dear John,
thank you very much – this works fine!
On 3. Apr. 2018, 13:04 +0200, John Kane , wrote:
> Place
> \usepackage[hang,flushmargin]{footmisc}
> in the LaTeX preamble.
>
> > On 3 April 2018 at 04:08, jezZiFeR wrote:
> > > Hello,
> > >
> > > could somebody please help: how could I get rid of the indentation of
> > > footnotes in the first line of the footer? I want every footnote to begin
> > > at the margin without indentation. I use KOMA-script-report in LyX 2.3.0.
> > > Please let me know if you need a screenshot.
> > >
> > > Thanks
> > > Jess
> > >
>
>
>
> --
> John Kane
> Kingston ON Canada
How to get rid of indentation in footnote
Hello, could somebody please help: how could I get rid of the indentation of footnotes in the first line of the footer? I want every footnote to begin at the margin without indentation. I use KOMA-script-report in LyX 2.3.0. Please let me know if you need a screenshot. Thanks Jess
Italics in chapter-titles etc.
Hello,
I have a LuaTeX-problem for a while now, or at least my problem might have to
do with it. In the moment words in the titles (of chapters etc.) are not
italicized, even though in my preamble I still use the command:
\DeclareFieldFormat{citetitle}{\mkbibemph{#1}}
I use LyX 2.2.3 on OS 10.13 and use LuaTeX (and KOMA-script article). Why do
the emphasized word not appear italicized?
Thanks
Jess
Re: Output / view without footnotes
Hello, thanks, good solution – yes, it helped! All best Jess On 15. Sep. 2017, 13:14 +0200, Jean-Marc Lasgouttes , wrote: > Le 15/09/2017 à 12:25, jezZiFeR a écrit : > > Hello, > > > > is there a possibility to view a document without the footnotes, so that > > one could switch between a view with and without footnotes, but still > > keeping them in the document? This would be very helpful… > > Hello, > > It is possible by keeping them in branches. > > HTH, > JMarc >
Output / view without footnotes
Hello, is there a possibility to view a document without the footnotes, so that one could switch between a view with and without footnotes, but still keeping them in the document? This would be very helpful… Best Jess
Shortcuts for fonts / OSX
Hello, I could not find out, how the shortcuts in LyX 2.2.3 for the fonts on OSX 10.12.5 are working. For example, the shortcut for »font-roman« is ^Z R. I am not sure, whether the first sign stands for the control-key, but nonetheless I have tried many possibilities, which all did not work, also for the »Z« and the »R«. Does this mean I should first enter shift+z and then shift+r? In this case it would not work. Sorry if this is obvious… Thanks Jess
Re: Document class for a lecture manuscript
Dear Rich, dear all, meanwhile I startet trying to use the KOMA-script article class. For me it is not that easy to search for the proper places in the documentation because it exists only in English and is very long. I would like to really get into it when I have really time for it. Still, I now try to adapt the mentioned class to my wishes. I was not yet able to achieve the following: • I would like to have smaller font sizes for the chapters and sections • have a separate colum for time-entries (I could use margins if needs be) • I would prefer to have the page number at the top right • I would like to change the distances between the paragraphs (e.g. 20 pt) I hope, this makes things a little easier to reproduce. Maybe somebody could help in one or another case, but I will keep trying to find the right spots in the documentation also. Jess On 9. Sep. 2017, 16:57 +0200, Rich Shepard , wrote: > On Sat, 9 Sep 2017, jezZiFeR wrote: > > > could somebody recommend a document class for a lecture manuscript / > > draft, from which reading is simple. In the document classes I have tried > > the titles are way too big. It would also be good, if there could be added > > time-stamps to the margins. > > Jess, > > What makes the classes you've tried unsuitable for a 'lecture > manuscript/draft?' What are the classes you used? > > If you look at the KOMA-script classes and read the manual you'll learn > that you can adjust just about everything so your documents have exactly the > flavor you want. If 'titles' (document title or section headings?) are too > large for your tastes you can re-define their size in the preamble. > > More information will allow us to provide more specific responses. > > Rich
Re: Koma-script-article and size of continuous text
Thank you for your quick reply, this works very well… All best * On 9. Sep. 2017, 15:35 +0200, Jürgen Spitzmüller , wrote: > Am Samstag, den 09.09.2017, 13:06 +0200 schrieb jezZiFeR: > > in LyX 2.2.3 (I use LuaTeX, but could also change that if necessary) > > I would like to use a bigger font-size of 14 pt for a draft in a > > KOMA-script-article. This could not be chosen in > > document/settings/fonts, because there only sizes from 12–12 pt are > > eligible in the menu (in German it is »Grundgröße«, while in English > > it might be s.th. like »basic size«). > > > > How could I achieve a bigger size for the continuous text > > nonetheless? > > Set font size to "default" and add "fontsize=14pt" to Document Class > Class Options > Custom. > > Jürgen > > > > > Thank you > > Jess
Koma-script-article and size of continuous text
Hello, in LyX 2.2.3 (I use LuaTeX, but could also change that if necessary) I would like to use a bigger font-size of 14 pt for a draft in a KOMA-script-article. This could not be chosen in document/settings/fonts, because there only sizes from 12–12 pt are eligible in the menu (in German it is »Grundgröße«, while in English it might be s.th. like »basic size«). How could I achieve a bigger size for the continuous text nonetheless? Thank you Jess
Document class for a lecture manuscript
Hello, could somebody recommend a document class for a lecture manuscript / draft, from which reading is simple. In the document classes I have tried the titles are way too big. It would also be good, if there could be added time-stamps to the margins. Thanks Jess
Skim as PDF-file-viewer on Mac
Hello, I would like to use Skim on Mac (10.12.5) as a PDF-file-viewer for LuaTeX-Output, but it does not work for me. • In Lyx LyX Version 2.2.3 I have entered the following: Prefs / Output / General / PDF-Command: /Applications/Skim.app/Skim.app/Contents/SharedSupport/displayline $$n $$o $$t Prefs / File Handling / File formats / PDF (LuaTeX) Viewer setting / Custom / open -a Skim.app $$i i • In Skim1.4.24 (98) I have entered Prefs / Sync / Command: /Applications/LyX.app/Contents/MacOS/lyxeditor Arguments: "%file" %line; /usr/bin/osascript -e 'tell application "LyX" to activate‘ (before I have also tried with »output« / LyX, which also did not work) Does anybody have an idea how I get it working? Thanks Jess
Re: BibTeX + self-edited bibliography…
Hello, maybe that was too obvious… Everything works fine now. Thank you Jess Jürgen Spitzmüller schrieb: 2017-03-20 13:59 GMT+01:00 jezZiFeR <mailto:jezzi...@gmail.com>>: Hello, up to now I only used BibTeX-bibliographies in LyX. Now I would like to add titles to the bibliography, which I did not mention in the article. Is there a way to do that? Yes, use \nocite* (or in the citation dialog: "Add to bibliography only" for the respective references). It would not mind to have the unmentioned entries in a separate paragraph. Would be very helpful… This can be done with the "Sectioned Bibliography" feature. It is described in the LyX manuals. HTH Jürgen All best Jess
Re: BibTeX + self-edited bibliography…
Hello Jürgen, thank you for your message. I did not forget to search the manuals, but it did not help: I have entered a bibliography-environment (Literaturverzeichnis-Umgebung in german). The manual says: »Am Anfang der ersten Zeile eines Absatzes werden Sie ein graues Kästchen mit einem Wort und einer Zahl in eckigen Klammern sehen.« / You will see a gray box in the first line of a paragraph with a word and a number in square brackets. In my case just the words »Die Literaturverzeichnis-Umgebung« are entered, nothing could be clicked or edited here. I use KOMA-Script-Aufsatz, natbib and also a BibDesk-generated bib-file for the bibliography. Maybe this is why I do not understand where to find the citation dialogue mentioned. Would that be tha place, in the bibliography-environment? I am also not sure where to enter the command. The »Sectioned Bibliographies« feature is very useful, thank you. All best Jess Jürgen Spitzmüller <mailto:sp...@lyx.org> 20. März 2017 um 17:18 2017-03-20 13:59 GMT+01:00 jezZiFeR <mailto:jezzi...@gmail.com>>: Hello, up to now I only used BibTeX-bibliographies in LyX. Now I would like to add titles to the bibliography, which I did not mention in the article. Is there a way to do that? Yes, use \nocite* (or in the citation dialog: "Add to bibliography only" for the respective references). It would not mind to have the unmentioned entries in a separate paragraph. Would be very helpful… This can be done with the "Sectioned Bibliography" feature. It is described in the LyX manuals. HTH Jürgen All best Jess
BibTeX + self-edited bibliography…
Hello, up to now I only used BibTeX-bibliographies in LyX. Now I would like to add titles to the bibliography, which I did not mention in the article. Is there a way to do that? It would not mind to have the unmentioned entries in a separate paragraph. Would be very helpful… All best Jess
Re: Missing glyphs! Missing character: There is no , (U+2028) in font [XXX]:mode=node;s
Dear Jürgen, yes, thanks – that was it! I think I pasted from a MMD-file, this is why this happened… Thanks for the quick solution, all best Jess Jürgen Spitzmüller <mailto:sp...@lyx.org> 19. März 2017 um 16:49 Am Sonntag, den 19.03.2017, 16:28 +0100 schrieb jezZiFeR: Hello, I have a problem with LuaTeX / XeTeX LyX 2.2.2 OS Sierra 10.12 LuaTeX, freshly updated No matter which font I chhose, I always get the message »Missing character: There is no (U+2028) in font [whichever]:mode=node;s«. U+2028 is the LINE SEPARATOR character: http://www.fileformat.info/info/unicode/char/2028/index.htm I suppose it got into your LyX document via copy& paste. I choose to show the output nonetheless several times, because the error-message keeps showing. With some fonts the italics are not displayed, in some cases the resulting PDF seems to be correct at first sight. The fonts seem to be correctly installed. The same happens with XeTeX also. Does anybody know what might be wrong here? I have seen a very close, but not a similar question in the archive: http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg196621.html That’s why I ask here. Hope, somebody could help. I'd suggest you try to locate this character in the document and remove it. You should be able to find it via simple search. HTH Jürgen Thanks Jess
Missing glyphs! Missing character: There is no , (U+2028) in font [XXX]:mode=node;s
Hello, I have a problem with LuaTeX / XeTeX LyX 2.2.2 OS Sierra 10.12 LuaTeX, freshly updated No matter which font I chhose, I always get the message »Missing character: There is no (U+2028) in font [whichever]:mode=node;s«. I choose to show the output nonetheless several times, because the error-message keeps showing. With some fonts the italics are not displayed, in some cases the resulting PDF seems to be correct at first sight. The fonts seem to be correctly installed. The same happens with XeTeX also. Does anybody know what might be wrong here? I have seen a very close, but not a similar question in the archive: http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg196621.html That’s why I ask here. Hope, somebody could help. Thanks Jess
Keeping wind of word-count open
Hello, is there a way to keep the window of Tools/Statistics open while writing and editing the current document? For me this would be great, because often I have to write a fixed amount of words, and it is a lot of selecting and clicking before being able to finish the project. OSX 10.11.2 LyX 2.1.4 (well, I’m going to update soon…) Thanks Jess
BibTeX-database on two different computers
Hello,
I have a problem with using the same BibTeX-database on two different
computers (OS X 10.11), which I synchronize on my Dropbox. The problem is,
that both users of the different computers have different names.
In the moment I have to change two things every time I change the computer:
1) I have to correct the paths in the BibTeX-bibliography
2) I have to adapt the appropriate entry in the preamble
(\addbibresource{/Users/E/Dropbox/bibdesk/…)
Is there a way to get a less complicated handling on two different
computers with th same BibTeX-database?
Thank you
Jess
Consecutive numbering in KOMA-Script article
Hello, I have a question regarding the numeration in KOMA-script article. I would like to have consecutive numbering starting from the beginning (with 1) in each section. Right now the numbering is consecutive throughout the whole document. After each section it just continues, while I would like to have to begin it with 1 in each section. I hope I have made clear, what I want to achieve: SECTION 2 1. Chapter 2. Chapter … SECTION 2 1. Chapter 2. Chapter … Thanks for any help Jess
Re: Space between footnote-number and Footnote-text
Thanks, this would be a very easy way in fact to use one command for all of
the footnotes. But right now I just get the TeX-command printed – I add a
screenshot (I entered 3 mm, to make it really obvious for testing)
Does anybody know what might go wrong here?
Thanks!
2016-04-17 19:36 GMT+02:00 Shay Riggs :
> Try sticking this [1] into the preamble:
>
>
> \let\oldfootnote\footnote
>
> \renewcommand\footnote[1]{%
>
> \oldfootnote{\hspace{1mm}#1}}
>
>
> Change “1mm” to whatever distance you require.
>
>
> It looks to me (in my limited experience) that this code automates
> Michael’s answer above.
>
>
> [1] Found at:
> http://tex.stackexchange.com/questions/54685/inserting-space-after-the-number-in-footnotes?rq=1
>
> On 17 April 2016 at 09:23, jezZiFeR wrote:
>
>> Hello Michael,
>>
>> thanks very much – this really seemed too simple, I just did not think of
>> that possibility…
>>
>> Best
>> Jess
>>
>>
>>
>>
>> 2016-04-17 10:04 GMT+02:00 Michael Berger :
>>
>>> You can user the normal formatting practice:
>>> Put the cursor in the ERT-box directly in front of the footnote text and
>>> then
>>> Insert > Formatting > Horizontal Space (choose e. g. 'interword space')
>>>
>>> Michael
>>>
>>>
>>> On 04/17/2016 09:21 AM, jezZiFeR wrote:
>>>
>>>> Hello,
>>>>
>>>> I would like to have a space between footnote-number and Footnote-text.
>>>> In the moment I do not have it, I add a small screenshot. I use the recent
>>>> versions of LyX, BibDesk and Biblatex-citation styles (biblatex-dw). How
>>>> could I achive a space after the small footnote-number?
>>>>
>>>> Thanks in advance, best
>>>> Jess
>>>>
>>>
>>>
>>
>
Two more questions regarding bibliographies…
Sorry, I have two more question regarding bibliographies: 1) I would like to use an emdash, when more than one publication of the same author are mentioned underneath. Right now I have the German word »ebda.«, which means ibidem, in the footnote. In the bibliography I would also like to haven an emdash, or at least not »Ders.«, what I have now. this is the word for male authors, but the author is not male. I add two small screenshots. 2) In the bibliography I have a dot at the end of each entry. How could I remove that? I use the recent versions of LyX, BibDesk and Biblatex-citation styles (biblatex-dw) on OS X. Thanks in advance Jess
Re: Space between footnote-number and Footnote-text
Hello Michael, thanks very much – this really seemed too simple, I just did not think of that possibility… Best Jess 2016-04-17 10:04 GMT+02:00 Michael Berger : > You can user the normal formatting practice: > Put the cursor in the ERT-box directly in front of the footnote text and > then > Insert > Formatting > Horizontal Space (choose e. g. 'interword space') > > Michael > > > On 04/17/2016 09:21 AM, jezZiFeR wrote: > >> Hello, >> >> I would like to have a space between footnote-number and Footnote-text. >> In the moment I do not have it, I add a small screenshot. I use the recent >> versions of LyX, BibDesk and Biblatex-citation styles (biblatex-dw). How >> could I achive a space after the small footnote-number? >> >> Thanks in advance, best >> Jess >> > >
Space between footnote-number and Footnote-text
Hello, I would like to have a space between footnote-number and Footnote-text. In the moment I do not have it, I add a small screenshot. I use the recent versions of LyX, BibDesk and Biblatex-citation styles (biblatex-dw). How could I achive a space after the small footnote-number? Thanks in advance, best Jess
Migration of LyX, TeX and extensions on OS X
Happy 2016 & hello to you, I have a question regarding the migration of Lyx and all parts of the TeX distribution from OS X 10.10.3 to OS X 10.11.2: I have already installed TeXLive-2015 and the current version of LyX on the new computer, but there are still some extensions missing. Could somebody pls tell me which folders I have to copy? I know, that I have something (I think the bibtex-stuff) in the user-folder usr/texlive. Is there something like an overview where things are installed, so that extensions could just be copied? Would the place of the folders still be the same under 10.11.2? I hope it is understandable what I mean and that somebody could help. Thanks, all best Jess
Forced line-break does not work in tables
Hello, I use LyX 2.1.4 on OS X. When I try to insert a forced linebreak (strg+return) nothing happens, I get the line, that the command is disabled. How else could I insert line breaks in tables: Thanks Jess
Re: No indentation of first paragraphs
Thank you – I now understood, what you meant by »using sections for creating headers«, which indeed I do. I only did not do this in this short minimal example, which was way too short to see that in my large file the following examples with the headers use the behavior I want. In fact my first line »Texttexttext«-line *is* indented: It is just in the case of an empty line before a new paragraph where the paragraph settings have to be changed, if an indentation is not wanted. This is fine, because it just happens a few times in the document. Best Jess > Am 13.08.2015 um 10:54 schrieb David : > > Am 13.08.2015 um 10:31 schrieb jezZiFeR: >> As far as I know I did not change the class options in the preamble. There >> is a XeTeX-command in the preamble, which might be unnecessary, but I see no >> changes in the class options. As I do not know what using Sections for >> creating headers is, I think I do not. >> >> Here is a minimal file: >> > > I highly advise you to organize your document using Sections, > Subsections and so on. > > Lyx/Latex cannot know that you mean "Texttexttext" to be a heading. It > is just a paragraph followed by a linebreak (whose usage is not > recommended). As "Texttexttext" is the first paragraph in your document, > it is *not* indented. All following paragraphs are indented. Actually, > this is the behaviour you want. > > To make "Texttexttext" a heading, put your cursor to this line, then > choose Section or similar from the pull-down menu in the upper left > corner (see screenshot attached). > > I have also attached an example Lyx file using an unnumbered Subsection. > > >
Re: No indentation of first paragraphs
As far as I know I did not change the class options in the preamble. There is a XeTeX-command in the preamble, which might be unnecessary, but I see no changes in the class options. As I do not know what using Sections for creating headers is, I think I do not. Here is a minimal file: Minimal Indentation.lyx Description: Binary data Thank you! > Am 13.08.2015 um 10:17 schrieb David Rörich > : > > Am 13.08.2015 um 10:10 schrieb jezZiFeR: >> >> I use KOMA-Script-report. >> > > Ok, this is weird. KOMAScript would usually not indent the first > paragraph in a new section or chapter unless you change the class > options in the preamble. Did you? > Do you use Sections for creating headers? > Could you send us a minimal Lyx file which illustrates your problem?
Re: No indentation of first paragraphs
Dear Michael, Thank you, this works well. Is there also an automatic possibility to not indent the first paragraphs after a headline in the whole document? Best Jess > Am 12.08.2015 um 23:07 schrieb Michael Berger : > > jezZiFeR gmail.com> writes: > >> >> Hello, >> >> how could I achieve, that the first line of a paragraph is indeed > completely to the left, when there is an >> empty line before it or rather when there is no other paragraph directly > before it. I add an example, so that >> it might be easier to understand: >> >> I want the first line (»Text«) to begin on the left, and the first line of > the first paragraph >> (»Arbeitsbereiche«) also. But the following paragraphs should still be > indented. >> >> Best >> Jess > Right-click in the respective paragraph, select paragraph settings and > remove the tick in 'indent paragraph' > Michael
Re: Biblatex not not found by LyX work on new computer / OS 10.10.3
Thanks again. Sorry, I wanted to mail the .bib, not the .tex-file. But I removed the BibTeX inset, which has been double anyway. I left the one in the LyX-note, and now it works. BTW: it is strange for me, the whole thing did not work, before I installed biblatex.module from my old computer, which is much older. Its name is not biblatex.module, but biblatex.module.module. With the other one bilatex does not work. Best Jess > Am 28.07.2015 um 17:16 schrieb Jürgen Spitzmüller : > > Am Dienstag 28 Juli 2015, 16:50:37 schrieb jezZiFeR: >> Thank you. >> >> I now removed the .txt-ending, so that I just have .module as ending. I >> reconfigured, but still, LyX does not find biblatex.module. Could I use >> Biblatex-citation-styles instead? > > This is the biblatex.module. It is called "Biblatex-citation-styles" in the > GUI. So if Document > Settings > Modules lets you select this, the module is > found. > >> When I try I get another error-message: >> bibliographystyle invalid. > > Yes, biblatex does not use the \bibliographystyle command of BibTeX. > Terefore, > the BibTeX inset must be put in a LyX note. > >> How could I get biblatex working? Are there any additional test I could do >> to find out what ist wrong? > > Delete the BibTeX inset which is outside the LyX note. See attached file (I > cannot test this file myself, since I do not have the *.bib file). > > HTH > Jürgen > >> Just in case I add a minimal-file and would be very thankful if anybody >> could help. >> >> Thanks >> Jess > >
Re: Biblatex not not found by LyX work on new computer / OS 10.10.3
Thanks again. Sorry, I wanted to mail the .bib, not the .tex-file. But I removed the BibTeX inset, which has been double anyway. I left the one in the LyX-note, and now it works. BTW: it is strange for me, the whole thing did not work, before I installed biblatex.module from my old computer, which is much older. Its name is not biblatex.module, but biblatex.module.module. With the other one bilatex does not work. Best Jess > Am 28.07.2015 um 17:16 schrieb Jürgen Spitzmüller : > > Am Dienstag 28 Juli 2015, 16:50:37 schrieb jezZiFeR: >> Thank you. >> >> I now removed the .txt-ending, so that I just have .module as ending. I >> reconfigured, but still, LyX does not find biblatex.module. Could I use >> Biblatex-citation-styles instead? > > This is the biblatex.module. It is called "Biblatex-citation-styles" in the > GUI. So if Document > Settings > Modules lets you select this, the module is > found. > >> When I try I get another error-message: >> bibliographystyle invalid. > > Yes, biblatex does not use the \bibliographystyle command of BibTeX. > Terefore, > the BibTeX inset must be put in a LyX note. > >> How could I get biblatex working? Are there any additional test I could do >> to find out what ist wrong? > > Delete the BibTeX inset which is outside the LyX note. See attached file (I > cannot test this file myself, since I do not have the *.bib file). > > HTH > Jürgen > >> Just in case I add a minimal-file and would be very thankful if anybody >> could help. >> >> Thanks >> Jess > >
Re: Biblatex not not found by LyX work on new computer / OS 10.10.3
Thank you. I now removed the .txt-ending, so that I just have .module as ending. I reconfigured, but still, LyX does not find biblatex.module. Could I use Biblatex-citation-styles instead? When I try I get another error-message: bibliographystyle invalid. How could I get biblatex working? Are there any additional test I could do to find out what ist wrong? Just in case I add a minimal-file and would be very thankful if anybody could help. Thanks Jess LyX Minimal LyX Minimal neu.lyx Description: Binary data Minimal.tex Description: TeX document Am Montag 20 Juli 2015, 20:12:59 schrieb jezZiFeR: > I run LyX 2.1.3 on OS 10.10.3. I installed the current bib latex.module, but > it could not be found by LyX. Could you please tell me, where the > biblatex.module has to be placed? LyX/about LyX tells me to put it into: > library/application support/LyX-2.1/ > > It is not placed exactly there, but has an own folder at that place: > /layouts. I hope this is fine. Should be fine. I am not a Mac user, though, > It has a .txt-ending, is that correct? > (biblatex.module.txt) No. It should be named biblatex.module (*.module is the file suffix). > > BTW: On my old system (OSX10.8) it was placed in > /usr/local/texlive/texmf-local/ > but in OS 10.10.3 it seems to have a new place. This is the TeX directory. Definitely not the correct place for LyX modules. Jürgen > Thank you! > Jess
Biblatex not not found by LyX work on new computer / OS 10.10.3
Hello, I have problems using biblatex an my new computer for weeks now, and could not find the problem. I run LyX 2.1.3 on OS 10.10.3. I installed the current bib latex.module, but it could not be found by LyX. Could you please tell me, where the biblatex.module has to be placed? LyX/about LyX tells me to put it into: library/application support/LyX-2.1/ It is not placed exactly there, but has an own folder at that place: /layouts. I hope this is fine. It has a .txt-ending, is that correct? (biblatex.module.txt) BTW: On my old system (OSX10.8) it was placed in /usr/local/texlive/texmf-local/ but in OS 10.10.3 it seems to have a new place. Thank you! Jess
Biblatex not not found by LyX work on new computer / OS 10.10.3
Hello, I have problems using biblatex an my new computer for weeks now, and could not find the problem. I run LyX 2.1.3 on OS 10.10.3. I installed the current bib latex.module, but it could not be found by LyX. Could you please tell me, where the biblatex.module has to be placed? LyX/about LyX tells me to put it into: library/application support/LyX-2.1/ It is not placed exactly there, but has an own folder at that place: /layouts. I hope this is fine. It has a .txt-ending, is that correct? (biblatex.module.txt) BTW: On my old system (OSX10.8) it was placed in /usr/local/texlive/texmf-local/ but in OS 10.10.3 it seems to have a new place. Thank you! Jess
Re: biblatex.module and biber not available
Thanks, Kornel, it is strange, that MacTeX says, that biblatex is installed, and biber also. Both are not available. I reinstalled both now, via teX Live Utility but it did not change anything. I do not really understand where to add the file you mention, because in my usr no layouts-directory exists (OSX10.10.3). I also checked my old system, there the biblatex.module ist not selected, but biber. Here it does not even appear, so it is not only biblatex.module, but also Biber I could not use. I would prefer Biber, because I have used it in the last year and it worked well. Why does the Biber-module not appear in my document preferences? Thanks Jess > Am 02.07.2015 um 21:44 schrieb Kornel Benko : > > The error message says it all. Missing file "biblatex.module". > You may want to download it from > "http://wiki.lyx.org/uploads/BibTeX/biblatex.module"; > to your userdir/layouts directory. > > Kornel > > Am Donnerstag, 2. Juli 2015 um 19:29:24, schrieb Steve Burnham > >> -Steve Burnham >> >> On Thu, Jul 2, 2015 at 1:10 PM jezZiFeR wrote: >> >>> Dear Steve, dear list, >>> >>> I also used MacTeX. I use biblatex, because I use Dominik Wassenhovens >>> Styles. On my last setup this went very well with fiber, which I could not >>> find in the modules. Here are the minimal example of my LyX and >>> BibDesk-files, and also the error message, which is in German. BTW: I >>> reconfigured several times. >>> >>> Thanks >>> >>> >>> >>> >>>> Am 02.07.2015 um 19:54 schrieb Steve Burnham : >>>> >>>> I'm running the same setup as you are. I used the MacTeX distribution to >>> get TeX installed and then I just installed LyX. That is the only software >>> I had to install. I have only used BibTeX and that has always worked just >>> fine for me. I don't have any experience with biblatex though. If you want >>> to send an example file over I'm happy to test it out just to confirm if >>> there are issues or not but I don't know if I will be much help in the >>> trouble shooting area. >>>> >>>> -Steve >>>> >>>> On Thu, Jul 2, 2015 at 11:44 AM jezZiFeR wrote: >>>> Hello, >>>> >>>> I have installed TeX and LyX on my new Laptop (OSX10.10) and now LyX >>> could not find biber or the bib latex.module. In TeX Live Utility biber is >>> installed, biblatex also is. Do I have to install anything else, or why >>> could I not find the appropriate modules in document/preferences/modules. >>>> >>>> Thanks for help >>>> Jess >>> >>> >> >> I can confirm I have the same issue. For the benefit of the forum I'm >> attaching a screenshot of the error in English. I also checked my package >> repository to see if biber was installed per instructions on the LyX site ( >> http://wiki.lyx.org/BibTeX/Biblatex) and you can see that it is in fact >> installed (also in the screen shot). To me the error gives the impression >> that there are just some LaTeX packages missing but I cannot figure out >> what in my research. >> >> -Steve >> [image: Screen Shot 2015-07-02 at 13.19.06.png]
Re: biblatex.module and biber not available
Dear Steve, dear list, I also used MacTeX. I use biblatex, because I use Dominik Wassenhovens Styles. On my last setup this went very well with fiber, which I could not find in the modules. Here are the minimal example of my LyX and BibDesk-files, and also the error message, which is in German. BTW: I reconfigured several times. Thanks Minimal.bib Description: Binary data Minimal.lyx Description: Binary data > Am 02.07.2015 um 19:54 schrieb Steve Burnham : > > I'm running the same setup as you are. I used the MacTeX distribution to get > TeX installed and then I just installed LyX. That is the only software I had > to install. I have only used BibTeX and that has always worked just fine for > me. I don't have any experience with biblatex though. If you want to send an > example file over I'm happy to test it out just to confirm if there are > issues or not but I don't know if I will be much help in the trouble shooting > area. > > -Steve > > On Thu, Jul 2, 2015 at 11:44 AM jezZiFeR wrote: > Hello, > > I have installed TeX and LyX on my new Laptop (OSX10.10) and now LyX could > not find biber or the bib latex.module. In TeX Live Utility biber is > installed, biblatex also is. Do I have to install anything else, or why could > I not find the appropriate modules in document/preferences/modules. > > Thanks for help > Jess
biblatex.module and biber not available
Hello, I have installed TeX and LyX on my new Laptop (OSX10.10) and now LyX could not find biber or the bib latex.module. In TeX Live Utility biber is installed, biblatex also is. Do I have to install anything else, or why could I not find the appropriate modules in document/preferences/modules. Thanks for help Jess
Re: Usability / index-window
>> 2015-04-25 18:04 GMT+02:00 jezZiFeR: >> In my outliner-window I could only switch inside of this outliner-window, >> not into the workspace. How did you get this working? >> >> Well, just hit the tab key. I did not do anything specific to achieve this. >> >> >> I could not provide screenshots for my second issue, because it does not >> exist this way. In the moment there are separate windows for the workspace >> and the outliner, and I think it could be comfortable to integrate the >> outliner into the workspace, maybe according to other word processors, where >> the index is integrated somehow. Every time I close the outliner, because it >> is too complicated to bring the cursor back into the workspace otherwise, >> and open it again, I have to resize it. >> >> >> Please provide a screenshot how LyX looks for you. I do not understand what >> you mean with "two windows". >> >> Jürgen > > I think Jess wants to dock the outliner pane. This is possible by dragging > the pane window near the left or right margin of the document window. See the > attached screenshot. The two windows one gets again with a click at the left > icon in the title. > > Stephan Thank you, Stephan, great! This is exactly what I was looking for. All problems solved… Best **
Usability / index-window
Dear list-members, I do not know where to send my wishes regarding the usability of LyX. Could anybody help, please? Or maybe there are some work-arounds which I don't know? / I have some proposals regarding the usability. At least for me and my personal use some things could be more comfortable, and I stumble across it again and again: + I would find it very useful to be able to switch the cursor from the index-window to the text-documents directly. I mean by this, that when I for example find for a certain place in the document via the index, and then start typing, the text is inserted in the filter-field of the index. Is there any easy way to get back to the document? I always have to click into it several times, until the cursor really gets there. And no, this is not my mouse… :] + Sometimes I also think it would be more comfortable to have the possibility to have the index-window in a different frame, but in the same window as the text. Then it would not be necessary to resize the items again and again. Especially when I want to enlarge the index-window I could do this over the document, but could not resize that then. I always have to think of making the document-window smaller first. Particularly in fullscreen-mode the window of the index is always in the way. LyX 2.1.3 OSX 10.8.5 / Thank you, best Jess
Re: Title of referenced URLs
Dear Ben,
thanks a lot, and it does not matter taking time, I am not in a rush.
Thanks a lot for your examples. I see that you used the same line in the
preamble and this worked the way I wanted to, because I wanted the
URL-date to be displayed.
After trying some things out with BibDesk and LyX I saw, that there was
one url-reference in my document, which was working correctly, the
URL-date was shown. I compared the entries in BibTeX and also in LyX and
then figured out, that it seems to be crucial to use a citation style in
LyX, which shows a year’s date.
By this I mean: In my case the url-date was not shown, when I did not
enter a citation-style LyX’s format-section, which does not display a
year – either in brackets or with a comma. Even if there is no entry of
a year’s date in BibTeX, it is important to choose such a style. Lyx in
this case shows two question marks in the gray field of the reference,
but nonetheless shows the URL-date in the document.
I hope that it is understandable what I mean. Thank you for your help,
it was good to know, that in your case things worked as I wanted them to.
Best
Jess
Benedict Holland <mailto:benedict.m.holl...@gmail.com>
9. Februar 2015 22:55
Sorry for getting back to you so late.
I tried this as the call to bibtex:
\usepackage[natbib=true,style=footnote-dw,urldate=long,abbreviate=true,pageref=true,idemtracker=false,backend=biber]{biblatex}
with a document I know would work with it. I get references that look
like this:
For example see Jens Abildtrup et al.: Spatial preference
heterogeneity in forest recreation, in: Ecological Economics 92.C
(2013), 67–77, URL: http:
//EconPapers.repec.org/RePEc:eee:ecolec:v:92:y:2013:i:c:p:67-
<http://EconPapers.repec.org/RePEc:eee:ecolec:v:92:y:2013:i:c:p:67-> 77,
within the next and like this in the references section:
Hanemann,W. Michael: Valuing the environment through contingent
valuation, English, in: The Journal of Economic Perspectives
8.4 (1994), 19–43, URL: http://www.jstor.org/stable/2138337.
The output might look different. I see the URL, the title of the
paper, and all other relevant information. What is it exactly you are
looking for?
Thanks,
~Ben
jezZiFeR <mailto:jezzi...@gmail.com>
6. Februar 2015 14:21
Dear Ben,
I think I don’t understand exactly what you mean. This is what I have
in the preamble:
\usepackage[natbib=true,style=footnote-dw,urldate=long,abbreviate=true,pageref=true,idemtracker=false,backend=biber]{biblatex}
Should I modify something?
Thank you
Jess
jezZiFeR <mailto:jezzi...@gmail.com>
5. Februar 2015 12:49
Hello Ben,
yes, I use biber as backend, sorry for not telling that before. So I
have those problems in spite of using biber.
Best
Jess
jezZiFeR <mailto:jezzi...@gmail.com>
3. Februar 2015 18:18
Hello,
I have a question regarding citing-formats for URLs. In the moment I
don´t get figured out, how the title of my reference could be
displayed. In BisDesk I tried out the different BibText-types (URL,
electronic, webpage). None of them shows the title, and also noct the
URL-date. I use the recent version of BibDesk, LyX and have installed
biblatex-dw, which I use with footnote-dw.
Is it normal, that the title of electronic sources is not shown?
Thank you
Jess
Re: Title of referenced URLs
Dear Ben,
I think I don’t understand exactly what you mean. This is what I have in
the preamble:
\usepackage[natbib=true,style=footnote-dw,urldate=long,abbreviate=true,pageref=true,idemtracker=false,backend=biber]{biblatex}
Should I modify something?
Thank you
Jess
Benedict Holland <mailto:benedict.m.holl...@gmail.com>
5. Februar 2015 17:55
In that case, can you post your call to biblatex located in the preamble?
~Ben
jezZiFeR <mailto:jezzi...@gmail.com>
5. Februar 2015 12:49
Hello Ben,
yes, I use biber as backend, sorry for not telling that before. So I
have those problems in spite of using biber.
Best
Jess
Benedict Holland <mailto:benedict.m.holl...@gmail.com>
4. Februar 2015 17:56
Are you using biblatex and biber as a backend? I don't think bibtex
and bibtex8 displays URLs by default. Biber does however. If this is
something which you need, perhaps biber is an option you want?
~Ben
jezZiFeR <mailto:jezzi...@gmail.com>
3. Februar 2015 18:18
Hello,
I have a question regarding citing-formats for URLs. In the moment I
don´t get figured out, how the title of my reference could be
displayed. In BisDesk I tried out the different BibText-types (URL,
electronic, webpage). None of them shows the title, and also noct the
URL-date. I use the recent version of BibDesk, LyX and have installed
biblatex-dw, which I use with footnote-dw.
Is it normal, that the title of electronic sources is not shown?
Thank you
Jess
Re: Title of referenced URLs
Hello Ben, yes, I use biber as backend, sorry for not telling that before. So I have those problems in spite of using biber. Best Jess Benedict Holland <mailto:benedict.m.holl...@gmail.com> 4. Februar 2015 17:56 Are you using biblatex and biber as a backend? I don't think bibtex and bibtex8 displays URLs by default. Biber does however. If this is something which you need, perhaps biber is an option you want? ~Ben jezZiFeR <mailto:jezzi...@gmail.com> 3. Februar 2015 18:18 Hello, I have a question regarding citing-formats for URLs. In the moment I don´t get figured out, how the title of my reference could be displayed. In BisDesk I tried out the different BibText-types (URL, electronic, webpage). None of them shows the title, and also noct the URL-date. I use the recent version of BibDesk, LyX and have installed biblatex-dw, which I use with footnote-dw. Is it normal, that the title of electronic sources is not shown? Thank you Jess
Title of referenced URLs
Hello, I have a question regarding citing-formats for URLs. In the moment I don´t get figured out, how the title of my reference could be displayed. In BisDesk I tried out the different BibText-types (URL, electronic, webpage). None of them shows the title, and also noct the URL-date. I use the recent version of BibDesk, LyX and have installed biblatex-dw, which I use with footnote-dw. Is it normal, that the title of electronic sources is not shown? Thank you Jess
Formatting of footnote does not work
Dear list, I have a question regarding the formatting of footnotes. I use LyX 2.0.7.1 on OSX with BibDesk 1.6.2. There is one footnote, which is shown unformatted, others are formatted and I can't find out, why. Does somebody have an idea? I add a minimal example here. Thanks in advance Jess Minimal.lyx Description: Binary data Minimal.bib Description: Binary data
Re: LyX wants to install X11…
Hello Stephan,
I now cleared the cache, and this is the new output:
10:44:42.184: Öffne Dokument ~/Desktop/Minimal braucht X11.lyx...
10:44:42.500: Dokument ~/Desktop/Minimal braucht X11.lyx ist geöffnet.
10:44:42.502: (file-open /Users/ZZZ/Desktop/Minimal braucht
X11.lyx)support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (832): filetools(getFormatFromContents)
File type not recognised before EOF!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
support/FileName.cpp (950): filetools(getFormatFromContents)
Couldn't find a known format!
graphics/PreviewLoader.cpp (473): adding snippet:
$ $
graphics/PreviewLoader.cpp (535): PreviewLoader::startLoading()
Buffer.cpp (1468): Validating buffer...
LyX needs the following commands when LaTeXing:
* Packages:\usepackage{setspace}
* Macros:
* Textclass stuff:\usepackage{enumitem} % customizable list
environments
\newlength{\lyxlabelwidth} % auxiliary length
* done.
Buffer.cpp (1474): Buffer validation done.
I hope this helps…
Jess
Am 29.05.2014 um 23:00 schrieb Stephan Witt :
> Am 29.05.2014 um 22:29 schrieb Richard Heck :
>
>> On 05/29/2014 01:15 PM, jezZiFeR wrote:
>>> Stephan, thank you, I have added the output . My TeX engine is TeXLive2012.
>>> Is it too old?
>
> No, I don't think so. I'm using the same.
>
>>
>> Hi, Jezz,
>>
>> Can you clear out the cache/ subdirectory of your user directory and try
>> this agai
Re: LyX wants to install X11…
s(0): processing succeeded for python -tt "/Applications/LyX.app/Contents/Resources/scripts/lyxpreview2bitmap.py" png "/var/folders/s5/yxhvjb7s4j1bx3x8xssb11ymgn/T/lyx_tmpdir.xJL580/lyx_tmpbuf2/0lyxpreview.tex" 120 00 faf0e6 xelatex Am 29.05.2014 um 18:50 schrieb Stephan Witt : > Am 29.05.2014 um 16:57 schrieb jezZiFeR : > >> Thank you, Stephan. >> Could you maybe tell me the name of the settings in 3. in German? >> >> >> Am 29.05.2014 um 15:09 schrieb Stephan Witt : >> >>> Am 29.05.2014 um 12:41 schrieb jezZiFeR : >>> >>>> Stephan, could you please tell me how to do that correctly? Thank you! >>>> Jess >>> >>> Yes. >>> >>> 1. Start LyX without any document open. >>> 2. View -> View Messages >>> 3. Go to Settings and choose "Selected" Debug Messages >> >> I do not find this in Germen (»Angewählt«) – where would I have to look? >> Thank you! > > 2. Ansicht -> Meldungen anzeigen > 3. Einstellungen, "Ausgewählte" Testmeldungen > 4. LaTeX Erzeugung/Ausführung und Laden und Konvertierung einer Grafik > > Stephan > >> >>> 4. Enable LaTeX generation/execution and Graphics conversion and loading >>> 5. Open your example >>> 6. Copy the text from Output and paste it to mail >
Re: LyX wants to install X11…
Thank you, Stephan. Could you maybe tell me the name of the settings in 3. in German? Am 29.05.2014 um 15:09 schrieb Stephan Witt : > Am 29.05.2014 um 12:41 schrieb jezZiFeR : > >> Stephan, could you please tell me how to do that correctly? Thank you! >> Jess > > Yes. > > 1. Start LyX without any document open. > 2. View -> View Messages > 3. Go to Settings and choose "Selected" Debug Messages I do not find this in Germen (»Angewählt«) – where would I have to look? Thank you! > 4. Enable LaTeX generation/execution and Graphics conversion and loading > 5. Open your example > 6. Copy the text from Output and paste it to mail > > Stephan
Re: LyX wants to install X11…
Stephan, could you please tell me how to do that correctly? Thank you! Jess Am 27.05.2014 um 22:36 schrieb Stephan Witt : > > I don't have the problem with the example. > > I enabled the log messages for LaTeX/generation and Graphics conversion. > This leads to the following output when opening Jezz's example file: > > = > 22:28:01.190: Opening document ~/Documents/lyxtest/Minimal braucht X11.lyx… > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (832): filetools(getFormatFromContents) > File type not recognised before EOF! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) > Couldn't find a known format! > support/FileName.cpp (950): filetools(getFormatFromContents) >
Re: LyX wants to install X11…
Dear Stephan, I have made a minimal example and add it here. The message appears already when opening the file. Thank you Jezz Minimal braucht X11.lyx Description: Binary data Am 27.05.2014 um 17:41 schrieb Stephan Witt : > Am 27.05.2014 um 17:13 schrieb jezZiFeR : > >> Hello, >> >> I do not know since when this happens, but in the moment LyX always tells >> me, that I would have to install X11 to open »gs«. Why does it ask that? >> I use LyX 2.0.7.1 on OSX 10.8.5. It might be, that this only happens when I >> open older documents, I am not sure up to now. Does anybody have an idea >> about that? > > Hello Jezz, > > "gs" is the program GhostScript and it needs an X11-display to present the > contents. > Apple isn't providing X11 out-of-the-box anymore since Mountain Lion (10.8.X). > Normally LyX is producing PDF documents directly and there is no need to > start "gs". > > The question is: why is "gs" used by LyX? And why doesn't it happen for all > documents? > Perhaps you have some special image in use? > > Stephan
LyX wants to install X11…
Hello, I do not know since when this happens, but in the moment LyX always tells me, that I would have to install X11 to open »gs«. Why does it ask that? I use LyX 2.0.7.1 on OSX 10.8.5. It might be, that this only happens when I open older documents, I am not sure up to now. Does anybody have an idea about that? Best Jezz
Shared view / split windows
Hello, I have a question regarding a function, which in the german LyX-version 2.0.7.1 is called »Ansicht teilen«, which means something like »shared view«. One could split the window horizontally or vertically. I would like to view two different files, but I don't always get opened the same file in the two windows. Is it possible to view two different files? Thank you Jess
