Hello Jacques,
Interestingly, your program stops at 309 on Pro v4.5, suggesting that the
limit was raised in latter versions. The limit has never caused me much of a
problem. Most tasks can be broken down or redesigned to accommodate the
restriction.
Regards,
Warren Vick
Europa Technologies Ltd
time. The exam was said
to be put together based on the technical support query database.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday
m obj_type As Integer
obj_type = ObjectInfo(ObjAlias, OBJ_INFO_TYPE)
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Eric Frost / HR and
Associates, Inc.
Sent: Monday, Augus
Hello Bob,
I'm pretty sure that you can only set label rotation for specific labels,
not all in a layer. Try performing a loop which goes through every object in
your layer. This however, may not be practical for large table.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa
y also be important.
Needless to say, Global Insight products address all of these issues!
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL P
nformation and a picture snapshot on our web site at
http://www.europa-tech.com
Let me know if you have any questions.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this li
As an additional to Ole's list, you can get base 10 (or indeed any base) log
of x from the natural log function using;
(log(x) / log(10))
Replace 10 with any base.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
-Original Message-
From: [EMAIL PROTECTED
in a region
is not guaranteed to be an include. So, even with a simple donut, the hole
may be expressed as the first polygon.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jon Petter N
distance.
Also, ensure that very long "straight" lines have a suitable number of
coincident nodes. This will reduce errors induced by the geometric straight
line vs. great circle path discrepancy.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
-Origin
://www.bosrup.com/web/overlib/). There is of course no reason
why each of the hot-spots could not link to other web pages.
Let me know what you think about it, or if you experience any problems with
your IE browser.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
n, the use of format$() to request a particular
number of decimal places solves that problem.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.comt
--
To unsubscribe from this list, send e-mail to [EMAI
product family with over
73,000 graded places - cost $845. This is just a point gazetteer - if you
need reference mapping instead, take a look at the Global Insight products.
Full details at http://www.europa-tech.com
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
London area)? If this field is all there
is then I would assume they are expressed to 100m resolution and need to be
multiplied up to convert to metres.
If you can described your coordinate data fully, I'd be happy to guide you
through the coordinate preparation and create points process.
Regar
n, reissue your query using the
results in the temporary column. I have tried other methods (casting, etc.)
but nothing seems to work, or work well. If anyone has cracked the direct
method, do let me know!
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europ
,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
by issuing the MB
window command;
set coordsys table TableName
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubs
it to display Zoom (Window Width).
Manually switch on your layers one-by-one and zoom in/our until you see your
desired range. Note the zoom value for min and max. Finally, in Layer
Control set the Zoom Layering parameters to the values.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http
on the toolbars to bring up the "Toolbar Options"
dialog and checking "Save as default". Is there anything with this option
that is not being saved?
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
P.S. This message is free
their nations.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or cont
. If I can list the above polylines and edit the coordinates of the
polylines ?
Answer as 2).
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL
it into something which could be imported into Access
or Excel and then exported as DBF.
The best solution would be to write a MapBasic program. It should be a
relatively short program which would not take long to develop and would
perform your task quickly and easily.
Regards,
Warren Vick
Europa
trying to achieve?
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body,
page.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
to tedious workarounds!
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or cont
e duplicates. Work with ANDs would be a bit more
complicated.
Sounds like a "data rich" project. Good luck!
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this
or
line-by-line file copying with replacement.
There is indeed no seek() function native to MapBasic. It's pretty straight
forward in a DLL, especially in C where this function has been a long
standing part of the standard run-time library,
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http
!
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
!
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
nt reaches a certain
threshold would be necessary. A good utility would also need to handle
multi-polygon regions and multi-segment polylines.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
ression as MI assumes it. Also, it would be wise to have your directory
paths implemented as variables rather than hard-coded and also to check for
the existence of the copy table before attempting the copy. You can do this
with the FileExists() function.
Regards,
Warren Vick
Europa Technolog
oop
which runs through the entered string and extracts the sub-strings/numbers
for your array.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROT
ions".
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
) - try
using it to see how bizarre it is. It is more in line with Windows GUI
guidelines to have the user enter the number in a dialog editbox and then a
button to validate action.
Regards,
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
ainder. ie. the result you require.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L"
your table with the expression:
first_names+second_names
If you wanted a space you would use: first_names+" "+second_names
Even with thousands of records, this update will not take too long.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http:/
a
suitable external function declaration.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L"
luck!
P.S. Are you going to the new F1 Grand Prix in KL?
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubs
the WGS-84 datum. This is correct for DCW and VMAP0 data.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubs
CLS print chr$(12)
CLS will not work if you type it in manually into the MI/MB window. You'll have to use
print
chr$(12).
This question is worth an extra 50 cents at $21
Boy am I gonna be rich out of you. :-)
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
at (317585,
4157043) in
UTM52/North.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the m
Hello all,
Any telecoms -L'ers going to the massive ITU event in Geneva next week? Finally
arrangements
permitting, I hope to be there for a day or two.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
(say 1000
records) and perform some analysis (using tools or perhaps just tweaking) to see what
makes a
difference. A 0.1 second saving will you a day by my linear reckoning.
Of course the thing not to do is spend 10 days think about it... :-)
Regards,
Warren Vick
Europa Technologies Ltd, U.K
:
PathToDirectory$(PathString)
Thanks in advance to anybody with the answer to my $20.50 question
If only I could earn $20.50 so quickly all the time. :-)
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
of
the
records you want to delete and delete the results. For example:
select * from TestTable where rowid mod 2 = 0 into TO_DEL ' Select every even record
delete from TO_DEL
Ditto for updates.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
political mapping (evening including East Timor) and a 19,500
place
gazetteer. It's a soft product downloaded from the web and licence purchase includes a
years
worth of updates free of charge. Full details on our web site at
http://www.europa-tech.com
Regards,
Warren Vick
Europa Technologies Ltd
borrowed this divider from another lister.
I'd give it back. :-)
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubs
serious bugs in MapInfo. Given that professionals may
stake their
reputation on distances and areas, it really does need to be looked at immediately.
By the way, complex buffer performance is terrible in v5.5... I've gone back to v5.0.
Regards,
Warren Vick
Europa Technologies Ltd, U
. For
anything other
than a basic find, this may not be sufficient positional accuracy.
Feel free to e-mail if you have any questions.
Regards,
Warren Vick
Europa Technologies Ltd, U.K.
http://www.europa-tech.com
48 matches
Mail list logo