Re: [MBZ] Parallel flow condenser

2020-04-13 Thread Mike Esh via Mercedes
Thanks Dan, that is the information I was looking for. Mike > On Apr 13, 2020, at 9:15 AM, Dan Penoff via Mercedes > wrote: > > Mike, > > I replaced the hoses I could get to in the engine compartment and re-sealed > the compressor, along with replacing the stock condenser with the parallel

Re: [MBZ] Engine swap 1984 300D to 1983 240D

2020-03-21 Thread Mike Esh via Mercedes
> Both are automatics The 300D transmission is trash, Transmission in 240D is good, transimssion in 300D is trash. > On Mar 21, 2020, at 12:11 PM, Dan Penoff via Mercedes > wrote: > > I agree with Floyd. Unless there’s a difference in transmissions, why not > just swap the whole assembly

Re: [MBZ] Sprinter Vans

2020-01-14 Thread Mike Esh via Mercedes
Craig, I have a Big Red Van as well. 1990 Chevy G20 Beauville. It pretty worn out inside, clearcaot is gone and its end pretty beat up. The running gear and engine are in excellent condition. Are you selling yours? If so, where are you located. I maybe interested. Thanks, Mike > On Jan

Re: [MBZ] 1983 240D Lower Ball Joint

2019-03-09 Thread Mike Esh via Mercedes
Thanks Floyd! I got the drivers side apart and used a little heat from a MAPS torch and several swings of the hammer and it is out. I will order the Lemorder ball joints today. While going through my parts drawer I came across a new engine mount which prompted me to look at the ones in the

Re: [MBZ] Hirschmann Part

2019-03-03 Thread Mike Esh via Mercedes
Dan, Can you authorize photos and send on? > On Mar 3, 2019, at 10:38 AM, Mike Esh wrote: > > > I am looking for a gear for a Hirschmann Antenna Model 6000u 485 163 21. It > is from the 1983 240D and other than the gear, everything else appears to > work properly. > In the attached photo

[MBZ] Fwd: Monark nozzles - Update

2019-03-03 Thread Mike Esh via Mercedes
I installed the new Monark nozzles in the 85 300D. I did not follow the Mercedes Source tutorial to carefully disassemble the injectors, boil each one, meticulously clean and blow dry each one of the parts or sand the mating surfaces. I believe I am what my wife calls a, “ready, fire, aim,”

[MBZ] Hirschmann Part

2019-03-03 Thread Mike Esh via Mercedes
I am looking for a gear for a Hirschmann Antenna Model 6000u 485 163 21. It is from the 1983 240D and other than the gear, everything else appears to work properly. In the attached photo it is the small black gear in the center of the unit. Does anyone have one they could part with? Is there

Re: [MBZ] It's broke

2019-02-25 Thread Mike Esh via Mercedes
Got It. Thanks > On Feb 25, 2019, at 8:47 PM, Rick Knoble via Mercedes > wrote: > > > Me thinks you need a Google account. > > > > Rick > > > > Original Message > > > > From: mercedes@okiebenz.com > Sent: February 25, 2019 7:45 PM > To: mercedes@okiebenz.com > Reply-to:

[MBZ] Fwd: Hearing test and leaking exhaust.

2019-02-21 Thread Mike Esh via Mercedes
I am having more and more trouble hearing people talk in regular conversation and it gets even more difficult to hear if there is background noise. So I downloaded an iPhone app and using my headphones I tested my hearing. Results are below if anyone wants to see them. I completed the test

Re: [MBZ] 123 and older reman interior parts from Reinvent the Wheel (no affiliation, etc.)

2019-02-21 Thread Mike Esh via Mercedes
Dan, I would be interested in getting that contact information from you. Thanks, Mike > On Feb 21, 2019, at 10:18 AM, Dan--- via Mercedes > wrote: > > I can put you in direct contact with the guy in Turkey who is making these if > you’re interested. I just bought a new dash pad for my W111

Re: [MBZ] Da pahts bidness

2019-02-04 Thread Mike Esh via Mercedes
FWIW - I contacted Jabba about ordering some Mercedes parts several months ago and he said he had been out of the parts business for a while. > On Feb 4, 2019, at 6:35 PM, Buggered Benzmail via Mercedes > wrote: > > I’ve been pleased with FCPEuro for some things I’ve bought. Have not dealt

Re: [MBZ] Hibernation

2019-01-30 Thread Mike Esh via Mercedes
1/28/2019 _ 9 degrees and winds of about 40 mph on Lake Michigan near Whitehall, Mi > On Jan 29, 2019, at 9:42 PM, Andrew Strasfogel via Mercedes > wrote: > > 1/3 of the USA is below zero or below freezing. We got a 1" blizzard in > the middle of rush hour that caused havoc. > > On

Re: [MBZ] Monark nozzles

2019-01-17 Thread Mike Esh via Mercedes
I have bought from him in the past. I just don’t want to buy the Kit he is selling. I don’t want or need another compression tester. > On Jan 17, 2019, at 5:53 PM, Randy Bennell via Mercedes > wrote: > > On 17/01/2019 4:32 PM, Dan Penoff via Mercedes wrote: >> I have a German eBay guy

Re: [MBZ] Any interest in a 87 300TD with a #17 head?

2019-01-10 Thread Mike Esh via Mercedes
Kaleb, What color is it and how many miles does it have on it? Thanks, Mike > On Jan 10, 2019, at 6:50 AM, M. Mitchell Marmel via Mercedes > wrote: > > SEND TITLE > > On Wed, Jan 9, 2019 at 11:17 PM Kaleb C. Striplin via Mercedes < > mercedes@okiebenz.com> wrote: > >> It’s been sitting a

[MBZ] $700 Car

2018-12-23 Thread Mike Esh via Mercedes
1983 240D $700 Plus - New tires for car hauler. Replace speedo drive gear caused by towing without removing driveshaft. (It was way to cold and way to dark) Fuel and expenses for getting car home. Testing relationship with buddy and his truck. Diesel fuel filters - main, tank, and secondary.

[MBZ] deisel Injector

2018-12-21 Thread Mike Esh via Mercedes
I am going to look at the injectors on my 240D this weekend Has anyone rebuilt the their injectors lately? What brand is reccomended? Thanks, Mike ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or

Re: [MBZ] 1983 240D Parts -

2018-12-03 Thread Mike Esh via Mercedes
> send what you think its worth. I think I have some that look "used" and one > that looks new. got a preference? Just functional or pretty and > functional? Ive got a lot of 124 stuff, but not much 123 stuff. I have > never junked a 123. They keep running! > >

Re: [MBZ] 1983 240D Parts -

2018-12-03 Thread Mike Esh via Mercedes
Sold! Let me cost and shipping and please send it along. Do you still have my address? > On Dec 3, 2018, at 2:47 PM, Curley McLain via Mercedes > wrote: > > I'm pretty sure I have a gas cap. Don't think I can help with any other items > > > Mike Esh via Mercedes w

Re: [MBZ] 1983 240D Parts -

2018-12-03 Thread Mike Esh via Mercedes
Nice! My son in law is going to print one tomorrow. I let you know how it turns out > On Dec 3, 2018, at 7:18 PM, Greg Fiorentino via Mercedes > wrote: > > https://www.thingiverse.com/thing:1480687 > > Greg > > -Original Message- > From: Mercedes

[MBZ] 1983 240D Parts -

2018-12-03 Thread Mike Esh via Mercedes
Does anyone want to sell any of the following. I am placing an order later today for my newly acquired 1983 240D Autohaus AZ wants almost $30.00 for a visor clip! Does anyone have a used one they would like to part with or know where I can get a used one? I am checking local junk yards.

Re: [MBZ] no cranky 87 td

2018-12-03 Thread Mike Esh via Mercedes
I’ve never tried it, but would and an inner tube work in the same manner? Place under car, blow up with portable air compressor, place jack stands, get the work done, remove. Or just use a floor jack. > On Dec 3, 2018, at 10:29 AM, Karl Wittnebel via Mercedes > wrote: > > Yes. Weirdly I

[MBZ] Woodstock, Georgia

2018-10-10 Thread Mike Esh via Mercedes
Is anyone around Woodstock, Georgia that could look at a 300D for me. The engine is out and I just want to ensure it is as rust free as the seller claims. I am thinking of having it shipped to Michigan or driving down and hauling it back on a tow dolly. I will get the address if anyone is

Re: [MBZ] Anyone want a rare Manny 240CD?

2018-09-24 Thread Mike Esh via Mercedes
Anyone have an idea of how much it would cost to have it shipped to Michigan? I am very interested. Michael E. Esh michael...@mac.com (C) 231.894.5505 On Sep 24, 2018, at 09:27 AM, "Kaleb C. Striplin via Mercedes" wrote: It’s probably worth it for the parts if nothing else. Sent from my

[MBZ] seat parts

2018-09-02 Thread Mike Esh via Mercedes
Clay, Just wanted to let you know, the seat parts you sent are exactly what I need. Thanks again for taking the time to help me out! Mike ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery

[MBZ] seat rail 3400 TD

2018-08-12 Thread Mike Esh via Mercedes
I am getting back to work on my 1985 300 TD. I am having new floor pans welded in - Does anyone have and would like to sell a drivers side set of seat rails and nuts and bolts that attach it to the seat and to the floor pan. The seat that came out the car has rusted to the point that the

Re: [MBZ] 84 Wagon?

2018-08-02 Thread Mike Esh via Mercedes
Has anyone went to look at this vehicle or made any inquiries?  I am very interested. thanks, Mike Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On Aug 01, 2018, at 01:37 PM, Frederick Moir via Mercedes wrote: 1984 Mercedes 300D Wagon $400

Re: [MBZ] Another reason to stay away from Walmart!

2018-06-14 Thread Mike Esh via Mercedes
Just got the estimate for repairs. $6856.00 I will attach a pdf as well for those interested. Mercedes 1985 repair Estimate 6-13-18.pdf Description: Adobe PDF document > On Jun 14, 2018, at 10:00 AM, Michael Esh via Mercedes > wrote: > > >> >> I got smacked by a Buick yesterday driving

Re: [MBZ] No frills - car Radio Supplier

2018-05-21 Thread Mike Esh via Mercedes
Thanks, Max. > On May 21, 2018, at 7:22 PM, Max Dillon via Mercedes > wrote: > > Looks like price has gone up a bit, I think I got it for about $150. > > https://www.egauges.com/TR7412UB-OR-USB-Bluetooth-12-Volt-Orange-LED-p/tr7412ub-or.htm > > -- > Max Dillon >

Re: [MBZ] Need a wagon?

2018-05-07 Thread Mike Esh via Mercedes
I have sent the info to her. Im hoping she can go take a look. > On May 7, 2018, at 12:15 PM, Mitch Haley via Mercedes > wrote: > > >> On May 7, 2018 at 11:56 AM Meade Dillon via Mercedes >> wrote: >> >> >> BaT flipper.. > > In serious need

[MBZ] Austin TX trip

2018-05-01 Thread Mike Esh via Mercedes
Just got back from Austin, TX trip driving the 85 300D It performed flawlessly and was a very comfortable and enjoyable trip. It took me about 23 hours each way with a 3 hour nap in the middle. Interestingly my MPG was better on the way down than on the way back. Probably due to a trailing

[MBZ] I won a new mercedes! hahahha.

2018-04-28 Thread Mike Esh via Mercedes
> Begin forwarded message: > > From: MERCEDES-BENZ NG > Subject: Re: 2018 Mercedes-Benz GLA-Class winner > Date: April 28, 2018 at 5:00:53 AM CDT > To: Mike Esh > > Mercedes-Benz Lottery International Promotions , > Fl 17 Shorthorn Eduro

[MBZ] Trio to Austin TX from Michigan

2018-04-18 Thread Mike Esh via Mercedes
I am driving from Kalamazoo, MI to visit my daughter at 5213 Jim Hogg, Austin TX. (love that street name) I’m leaving this Friday and returning on or about next Friday. I will be driving my 1985 300D. Does anyone in-between/on the way (within reason) need anything picked up and delivered?

[MBZ] Scam Bolts? Was Re: MB Canada

2018-04-09 Thread Mike Esh via Mercedes
No Benz content question. 2011 Subaru Outback - Cam bolts. I brought my daughters car in for alignment after my indy replaced tie rod ends (he can’t do alignments). Shop calls and says they can’t align it properly because it doesn’t have any “cam bolts” and it needs new “cam bolts”. I asked

Re: [MBZ] Crazy as BAT?

2018-03-26 Thread Mike Esh via Mercedes
Is it normal on this vehicle to one backup light that is red and the other white? > On Mar 26, 2018, at 9:13 PM, Curley McLain via Mercedes > wrote: > > yellow box is yuro emergency triangle reflector. > >> Curt Raymond via Mercedes >>

Re: [MBZ] Anyone there today?

2018-03-08 Thread Mike Esh via Mercedes
ok. Thanks > On Mar 8, 2018, at 5:39 PM, Buggered Benzmail via Mercedes > <mercedes@okiebenz.com> wrote: > > Pretty much body rotted. Mechanicals are pretty much OK. > > --R > Sent from iPhone > >> On Mar 8, 2018, at 5:26 PM, Mike Esh via Merced

Re: [MBZ] Anyone there today?

2018-03-08 Thread Mike Esh via Mercedes
What is up with the 300TD? I need a good TD 81 - 85 body. Mike > On Mar 8, 2018, at 3:53 PM, Floyd Thursby via Mercedes > wrote: > > I'm here, no Benzing yet today since I got the $500E300 running pretty well > yesterday. > > But I was thinking I need to start

Re: [MBZ] LIST MOM Re: OT a little truth for the albore crowd.

2018-02-26 Thread Mike Esh via Mercedes
Can you list a couple of the unbiased sites that i could look at to learn more facts instead of opinions. thanks, Mike > On Feb 25, 2018, at 9:44 PM, Rick Knoble via Mercedes > wrote: > > Dwight sez: > >> ‎I am wondering how many of the listers >posting on this have

Re: [MBZ] Trashed my heater valve

2018-01-24 Thread Mike Esh via Mercedes
Thanks Andrew.  I will send you an email if I do here from by Monday or Tuesday. Mike Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On Jan 24, 2018, at 11:01 AM, Andrew Strasfogel via Mercedes wrote: Just found out I will be going on a day hike

[MBZ] Trashed my heater valve

2018-01-23 Thread Mike Esh via Mercedes
I'm still working on intermittent heat in 85 300D and ruined the monovalve housing.(the part with 4 screws that the monovalve insert slides into.   When I took it out to look at the insert for leaks I pulled the wires off the transformer.  Does anyone have a extra used one laying around they

[MBZ] New Heater Question was Re: Monovalve Static test out of the car?

2017-11-28 Thread Mike Esh via Mercedes
The heat in my 85 300D is difficult to regulate each time I start out.  If I have the temp regulator set for anything other than all the way cold it blows major heat until I rotate the regulator all the way to cold, then wait for it to blow cold.  After doing that I can regulate temp pretty

Re: [MBZ] Subject: lug bolts for 300D w/ steel wheels (the short

2017-11-10 Thread Mike Esh via Mercedes
Thanks, yes, I think he is  sending them to the address I provided. Mike Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On Nov 10, 2017, at 03:11 PM, Rdeafboy via Mercedes wrote: Mike ...I see you are getting them ...Anyhow i found 3 short

Re: [MBZ] lug bolts for 300D w/ steel wheels (the short ones)

2017-11-09 Thread Mike Esh via Mercedes
bolt wizards. -D On Nov 9, 2017, at 2:33 PM, Mike Esh via Mercedes <mercedes@okiebenz.com> wrote: Does anyone have a set of 20 lug bolts for 300D w/ steel wheels (the short ones) they would like to sell me? Mine went with the 84 300D I sold a couple of months ago and now it is time to

Re: [MBZ] Subject: lug bolts for 300D w/ steel wheels (the short

2017-11-09 Thread Mike Esh via Mercedes
Thanks Bob, I'll be waiting! Mike Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On Nov 09, 2017, at 04:27 PM, Rdeafboy via Mercedes wrote: Hang tight ..Let me look for mine since I grabbed them at a junkyard...I have a 240D so I need the long ones

[MBZ] lug bolts for 300D w/ steel wheels (the short ones)

2017-11-09 Thread Mike Esh via Mercedes
Does anyone have a set of 20 lug bolts for 300D w/ steel wheels  (the short ones) they would like to sell me?  Mine went with the 84 300D I sold a couple of months ago and now it is time to put the Blizzacks winter treads on.   Thanks in advance, Mike Michael E. Esh m...@barr.com

Re: [MBZ] Spring Stretch Results

2017-03-27 Thread Mike Esh via Mercedes
I removed the bolt but I could not remove the spring.  It looks like a ball with a spring some how holding the ball?  I  could see the ball and spring through the holes in the bolt but not remove the spring.   Am I doing some thing wrong? Mike Michael E. Esh m...@barr.com michael...@mac.com

Re: [MBZ] Continental Radios

2017-01-17 Thread Mike Esh via Mercedes
On the website mentioned in the email this radio mentions it comes with USB and Orangetooth Part # Tr7412UB=OR What is Orangetooth?  I have never heard of this.  I  googled it couldnt find anything. Thanks Mike Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On Jan 17, 2017,

[MBZ] 1985 300D Dash Lights Glowing

2016-11-29 Thread Mike Esh via Mercedes
I just completed a diesel purge a couple of days ago(thanks to those who helped) and when I got in the car last night I noticed the parking brake warning light, the glow plug light which is right next to it and the low fuel level warning light, which is no where near it, were glowing faintly.  

Re: [MBZ] Diesel purge.

2016-11-28 Thread Mike Esh via Mercedes
Thanks for the help. The job is complete. Definately running a little better? Mike Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On Nov 28, 2016, at 12:58 PM, Meade Dillon via Mercedes wrote: I left out a lot of stuff, like the fact that the steel

Re: [MBZ] 1985 300D

2016-08-02 Thread Mike Esh via Mercedes
Yes, Please contact me. Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On Aug 02, 2016, at 06:08 PM, Rick Knoble via Mercedes wrote: I know someone who has a complete stainless steel exhaust (used) if you are interested. Rick Sent from

[MBZ] 1985 300D

2016-08-02 Thread Mike Esh via Mercedes
My exhaust pipe rusted through where the downpipe attaches to the rest of the system and fell off on the way home today. I removed everything from there back and discovered holes in other areas as well. I am going to replace the whole system. Any suggestions as to where the best place to

Re: [MBZ] Ball joint(s) 1985 300D

2016-06-04 Thread Mike Esh via Mercedes
ontrol arm while the knuckle was removed. But replacing most of the other rubber (except upper control arm) will require a good spring compressor. Scott -Original Message- From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Mike Esh via Mercedes Sent: Wednesday, May

Re: [MBZ] Ball joint(s) 1985 300D

2016-05-25 Thread Mike Esh via Mercedes
Thanks fellas, I'll take it in have it checked.  Then the appropriate parts from NorthLake. Mike Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 On May 24, 2016, at 11:31 AM, Mitch Haley via Mercedes wrote: Rusty used to sell a front suspension kit,

[MBZ] 280 SE on Craigs list

2016-01-16 Thread Mike Esh via Mercedes
73 280SE 4.5 $3000.00 on Craigslist . No interest http://slo.craigslist.org/cto/5389945355.html Michael E. Esh m...@barr.com michael...@mac.com (C) 231.894.5505 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

[MBZ] OT - Speeding Up Time Machine Backups,

2015-12-14 Thread Mike Esh via Mercedes
I am interested and do not know very much about how to work on a computer so I would need detailed instruction. I am using the newer Airport Time Capsule that is also a Wifi station. My wife has about 1.5 terabytes of pictures we have backed up using an Ethernet cable and it took about 72

[MBZ] Fwd: Cars.com Used Car Lead for A Quality Auto Sales - 1985 Mercedes-Benz E-Class

2015-08-06 Thread Mike Esh via Mercedes
The 1985 300E Wagon is still available as of 2:00 p.m. today. Located: 1420 N Causeway Blvd, Metairie, LA. Wish I was closer. Mike Michael E. Esh me...@horizonenv.com michael...@mac.com (C) 231.894.5505 Begin forwarded message: From: David Munoz munoz.davi...@gmail.com Date: August 06,

[MBZ] 1985 300D - Intermittent glow light while driving

2015-06-25 Thread Mike Esh via Mercedes
Last night while driving home my glow light flickered on and off several times and then on my way to work this morning it came on several times while driving. At one point it stayed on solidly for more than a minute. Then it flickered a few more times and went out and did not come back the rest

Re: [MBZ] trouble right here in River City

2015-06-12 Thread Mike Esh via Mercedes
Just received my new ATE Master Cylinder from Gary for my 85 300D. $119.00 delivered to my front door in three days. My Indy ruined mine when I had him install rear ATE calipers and pads.(From Gary) He flushed system and renewed fluid while tearing up seals. :( They seem to figure out a

Re: [MBZ] And now for something completely different (not OT) - R/R W123 coolant hose

2015-06-10 Thread Mike Esh via Mercedes
Explained the hose location to Gary and he ordered the right one. Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.894.5505 On Jun 10, 2015, at 03:11 AM, Andrew Strasfogel via Mercedes mercedes@okiebenz.com wrote: Thanks, Mike - how did

Re: [MBZ] And now for something completely different (not OT) - R/R W123 coolant hose

2015-06-10 Thread Mike Esh via Mercedes
Actually mine was #257. Or are you referring to Andrew's hose?  Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.894.5505 On Jun 10, 2015, at 04:04 AM, Dan Penoff via Mercedes mercedes@okiebenz.com wrote: All over the place online. Your

[MBZ] Short coolant hose

2015-05-18 Thread Mike Esh via Mercedes
I am going to replace the short coolant hose between the block and the thermostat mount on my 85 300D. Is there anything I need to know before getting into it? I have ordered a new thermostat and the gasket between the block and the mount. Thanks, Mike Michael E. Esh me...@horizonenv.com

Re: [MBZ] OT faucets

2015-03-23 Thread Mike Esh via Mercedes
Here is an nice one. A little on the high side for me. (: Buy Kohler K-6227-c15-bv Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344 On Mar 23, 2015, at 12:44 PM, OK Don via Mercedes mercedes@okiebenz.com wrote: I've taken to

[MBZ] New tires link?

2015-03-16 Thread Mike Esh via Mercedes
Can someone send me the name of the tire company that whas reccomended by a list member a couple of months ago? It was for inexpensive tires ordered online. Thanks, Mike Michael E. Esh michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344

Re: [MBZ] New tires link?

2015-03-16 Thread Mike Esh via Mercedes
, 2015 at 9:59 AM, Kaleb C. Striplin via Mercedes mercedes@okiebenz.com wrote: I buy most of my tires from discounttiredirect.com Sent from my iPhone On Mar 16, 2015, at 8:58 AM, Mike Esh via Mercedes mercedes@okiebenz.com wrote: Can someone send me the name of the tire company that whas

Re: [MBZ] New tires link?

2015-03-16 Thread Mike Esh via Mercedes
, Mike Esh via Mercedes mercedes@okiebenz.com wrote: Thanks Andrew, thats the one I was looking for. Kaleb, I did find some Cooper CS3 Touring 195 /60 R15 88T SL BSW for $60.00 including shipping! With 40.00 mail in rebate. They might be the ones I order for my son's 2002 Honda Civic. Michael

[MBZ] Heating or Propulsion?

2015-03-13 Thread Mike Esh via Mercedes
Pretty cold in Russiaalternate fuel.jpg Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or

[MBZ] More Austin Info-if anyone is interested

2015-03-12 Thread Mike Esh via Mercedes
My daughtermoved to Austin about a year ago, leased the property on Jim Hogg Avenue and is in the process of supporting supporting local and traveling musicians in the Austin area.

Re: [MBZ] Another question for poos

2015-03-12 Thread Mike Esh via Mercedes
I bought my last compressor from Gary. It is still working well and coming up to the 3rd summer. Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344 On Mar 11, 2015, at 04:10 PM, Dan Penoff via Mercedes mercedes@okiebenz.com wrote:

[MBZ] Too Much Heat

2015-03-12 Thread Mike Esh via Mercedes
Took my 85 300D to work this morning and I was unable to control the heat output unless I kicked on the AC. Lots of heat and would not start cooling unless AC was full on. I tried all of the buttons to no avail. Is this a PBU problem or monovalve problem? Thaks, Mike Michael E. Esh

Re: [MBZ] Austin TX Rental Car Info?

2015-03-11 Thread Mike Esh via Mercedes
drink Shiners. --R On 3/11/15 9:52 AM, Mike Esh via Mercedes wrote: My family and I will be visiting my daughter who lives on Jim Hogg, Austin, TX 78756. We will be flying on Delta, leaving from Kalamazoo on April 5 and departing Austin on April 11. We will need to rent a car. Does anyone know

Re: [MBZ] Austin TX Rental Car Info?

2015-03-11 Thread Mike Esh via Mercedes
Sorry, sent to the wrong address. Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344 On Mar 11, 2015, at 02:32 PM, Mike Esh via Mercedes mercedes@okiebenz.com wrote: hi Jules, Do you have a plan or ideas about where you are going

[MBZ] Austin TX Rental Car Info?

2015-03-11 Thread Mike Esh via Mercedes
My family and I will be visiting my daughter who lives on Jim Hogg, Austin, TX 78756. We will be flying on Delta, leaving from Kalamazoo on April 5 and departing Austin on April 11. We will need to rent a car. Does anyone know of any deals/favorable places to rent from. Looking for

Re: [MBZ] Global warming? No, Global ice age.

2015-03-06 Thread Mike Esh via Mercedes
John Coleman says no to human induced global warming! http://conservativepost.com/80-yr-old-weather-channel-founder-explains-the-history-of-the-global-warming-fraud/ Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344 On Mar 06, 2015,

Re: [MBZ] OT - CITI Replaces AMEX @ Costco

2015-03-02 Thread Mike Esh via Mercedes
Am I missing something? I used my Mastercard Credit Card at Sam's today. It is not affiliated with Sam's in any way. Mike michael...@mac.com (C) 231.286.2344 On Mar 02, 2015, at 12:36 PM, Russ Williams via Mercedes mercedes@okiebenz.com wrote: It will be a Citi Visa card according to

Re: [MBZ] OT - CITI Replaces AMEX @ Costco

2015-03-02 Thread Mike Esh via Mercedes
/2/15 1:17 PM, Mike Esh via Mercedes wrote: Am I missing something? I used my Mastercard Credit Card at Sam's today. It is not affiliated with Sam's in any way. Mike michael...@mac.com (C) 231.286.2344 On Mar 02, 2015, at 12:36 PM, Russ Williams via Mercedes mercedes@okiebenz.com wrote

Re: [MBZ] Why the French banned some diesels in Paris. AP story

2015-02-11 Thread Mike Esh via Mercedes
Andrew, Are you referring to the temperature? I don't know how they manage to make the adjustment... Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344 On Feb 10, 2015, at 11:19 AM, Andrew Strasfogel via Mercedes

Re: [MBZ] A rare break (SDL)

2015-01-26 Thread Mike Esh via Mercedes
I have a front seat without covering out of a 1984 300D that is in good shape. The sliders and motor are gone, just the top section is there. What exactly do you need. Let me know an I will take a look to see if it is on good condition. Michael E. Esh me...@horizonenv.com michael...@mac.com

Re: [MBZ] 190D back to legal again

2015-01-06 Thread Mike Esh via Mercedes
We have had about foot of snow over the last couple of days and the temps are hovering around 10 degrees. Thank goodness we have had little wind to blow the stuff around. Whitehall, MI Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C)

[MBZ] Off Topic - Reliable electric dimmer switch

2014-09-04 Thread Mike Esh via Mercedes
Does anyone have a source for a a good, long lasting,and reliable dimmer switch for my kitchen and bathroom lights. The kitchen needs to run 7 can light lights and the bathroom has twelve 40 watt globe lights. I have replaced both of them twice over the past couple of years because they begin

Re: [MBZ] W124 Lower Control Arms and Ball joints - cost comparison

2014-07-24 Thread Mike Esh via Mercedes
I just ordered new parts for my 1985 300D from Gary. He is very helpful in making sure I get the right part and the right quality of the part. I just recieved new Lemforder Tie Rod Assemblies, a drag link and a Bilstien steering shock. I communicate with him and place my orders via email.

Re: [MBZ] 123 Body Panels

2014-07-17 Thread Mike Esh via Mercedes
I bought a couple of floor boards from these guys last year. They may have what you are looking for. KK Manufacturing 951 Nine Mile Road Sparta MI, 49435 616 784 4286 Michael E. Esh me...@horizonenv.com michael...@mac.com http://www.yugster.com/invite/138123 (C) 231.286.2344 On Jul 16,