Re: azalia SPDIF with monitored line-in

On Sat, Mar 04, 2023 at 08:27:45PM +0100, Jan Stary wrote: > On Mar 04 18:46:29, neb...@rawtext.club wrote: > > On Sat, Mar 04, 2023 at 06:21:08PM +0100, Jan Stary wrote: > > > > I have two devices around here. Let's call one devA and one devB. > > > > devB is my main OpenBSD workstation devA is

Re: azalia SPDIF with monitored line-in

is lost somewhere along the way.) That seems a bot convoluted to me. > > > I switched to SPDIF with the following mixerctl(8) command > > > `mixerctl -t outputs.mode=digital` > > > > > > I tried to set the "SPDIF_source" to something different but mi

Re: azalia SPDIF with monitored line-in

ried to set the "SPDIF_source" to something different but mixerctl > > states "Bad enum value ...". Is there any chance to mix the line-in > > with the default output like I did in analog mode? What am I missing > > here? In azalia(4) the outputs.mode

Re: azalia SPDIF with monitored line-in

with the following mixerctl(8) command > `mixerctl -t outputs.mode=digital` > > I tried to set the "SPDIF_source" to something different but mixerctl > states "Bad enum value ...". Is there any chance to mix the line-in > with the default output

azalia SPDIF with monitored line-in

at am I missing here? In azalia(4) the outputs.mode and record.mode can both be set to analog or digital as far as I unterstand line-in should be record? I'm running OpenBSD 7.2 GENERIC.MP#6 amd64 dmesg |grep audio --- azalia1 at pci10 dev 0 function 1 "ATI Renoir HD Audio" rev 0x00: msi a

[azalia] Audio stuck problem with Realtek ALC 892

Hi, right now I have a workstation with Ryzen 7 3800x, B550 Motherboard and a audio codec Realtek ALC892. From my first installation the only issue with OpenBSD is audio random stuck, a old problem with Realtek Audio and Ryzen PC not solved. In my hunting a test two awful patch in

no azalia nor sdmmc on Intel NUC

Hi, I have a Intel NUC (NUC7CJYHN) which I installed OpenBSD 7.1 on it. Installation went fine and most of the things work out of the box. There is a SD card slot on the side that does not seem effective, the only message I get is: sdmmc0: can't enable card There is no kernel activity if I

Re: Gemini Lake HD Audio (azalia?) not working on StarLabs StarLite MK IV

On Fri, Jun 03, 2022 at 05:33:15PM +0100, Chris Narkiewicz wrote: > > Your device is subclass audio not subclass hd audio. Try this: > > I can confirm that the patch works. Also, headphones are correctly > detected when plugged. > > Many thanks for the help. thanks, committed

Re: Gemini Lake HD Audio (azalia?) not working on StarLabs StarLite MK IV

ytes > 0x0100: Enhanced Capability 0x00: Unknown > > Relevant dmesg output: > cpu0: Intel(R) Pentium(R) Silver N5030 CPU @ 1.10GHz, 2800.01 MHz, 06-7a-08 > "Intel Gemini Lake HD Audio" rev 0x06 at pci0 dev 14 function 0 not configured > > Digging into t

Re: azalia: no sound

> It doesn't work under Win7, I just check... Fried soundcard? And you have a lot of disks too, amazing ...

Re: azalia: no sound

hine with both the same Realtek ALC892 codec > and the ESI-Julia card. > I just connected amplifier to the green jack and it makes sound when I > play sounds using azalia, with the default settings. > According to your mixerctl output, your're using the green jack (aka > line-out) a

Re: azalia: no sound

d the ESI-Julia card. I just connected amplifier to the green jack and it makes sound when I play sounds using azalia, with the default settings. According to your mixerctl output, your're using the green jack (aka line-out) as well; your audioctl tests show that the azalia host works. So I'm very surpr

Re: azalia: no sound

> OpenBSD detected 3 sound cards for you. From what I recall, the one on > the HDMI video output (associated to your video card) is not > supported, so no sound there. > Maybe the sound goes to your envy0, ESI Julia sound card. Could you > check with some phones or speakers? Sound goes to Realtek

Re: azalia: no sound

OpenBSD detected 3 sound cards for you. From what I recall, the one on the HDMI video output (associated to your video card) is not supported, so no sound there. Maybe the sound goes to your envy0, ESI Julia sound card. Could you check with some phones or speakers? As for the Realtek one, it looks

azalia: no sound

Hello. My problem: no sound on azalia, My dmesg: OpenBSD 7.1-current (GENERIC.MP) #485: Thu Apr 28 09:39:27 MDT 2022 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8534949888 (8139MB) avail mem = 8258949120 (7876MB) random: good seed from bootblocks mpath0

no sound on azalia

Hello. My problem: no sound on azalia, My dmesg: https://pastebin.com/rK1uUUrZ My mixerctl -v: https://pastebin.com/DDifPsW7 My little debug after read faq: https://pastebin.com/Su54uEPq Help, please.

no sound on azalia

Hello. My problem: no sound on azalia, My dmesg: https://pastebin.com/rK1uUUrZ My mixerctl -v: https://pastebin.com/DDifPsW7 My little debug after read faq: https://pastebin.com/Su54uEPq Help, please. -- http://nightbbs.ru

Re: SPDIF not working with azalia(4) based card

100, Ricardo Mestre wrote: > > I have an azalia(4) based card integrated in my motherboard connected to a > > receiver through SPDIF, but I can't make it output any sound, only if I > > connect > > the cable to the 3.5mm headphone jack. And yes, I already toggled the > >

Re: SPDIF not working with azalia(4) based card

On Tue, Apr 10, 2018 at 07:28:03AM +0100, Ricardo Mestre wrote: > I have an azalia(4) based card integrated in my motherboard connected to a > receiver through SPDIF, but I can't make it output any sound, only if I > connect > the cable to the 3.5mm headphone jack. And yes, I alr

Re: no sound on built-in speaker with azalia(4) / Realtek ALC256 on Intel 500 Series

Felix Kronlage-Dammers wrote: > On Sun, Sep 26, 2021 at 01:59:21PM +0200, Stefan Hagen wrote: > > Hi Stefan, > > thanks for the reply and the pointer towards sof. > > > > am trying to figure out why on this laptop no sound through the speakers > > > is played. The speaker are functioning on a

Re: no sound on built-in speaker with azalia(4) / Realtek ALC256 on Intel 500 Series

On Sun, Sep 26, 2021 at 01:59:21PM +0200, Stefan Hagen wrote: Hi Stefan, thanks for the reply and the pointer towards sof. > > am trying to figure out why on this laptop no sound through the speakers > > is played. The speaker are functioning on a dual-booted linux (so > > technically they're

Re: no sound on built-in speaker with azalia(4) / Realtek ALC256 on Intel 500 Series

Felix Kronlage-Dammers wrote: > am trying to figure out why on this laptop no sound through the speakers > is played. The speaker are functioning on a dual-booted linux (so > technically they're wired ;) > > Sound is playing through the headphone jack just fine. > > --- > azalia0 at pci0 dev 31

no sound on built-in speaker with azalia(4) / Realtek ALC256 on Intel 500 Series

hi, am trying to figure out why on this laptop no sound through the speakers is played. The speaker are functioning on a dual-booted linux (so technically they're wired ;) Sound is playing through the headphone jack just fine. --- azalia0 at pci0 dev 31 function 3 "Intel 500 Series HD Audio"

OBSD 6.9 boot hangs on azalia

Hi, Kicking this as it first appeared in the 6.8 release. I have upgraded a PC with a VIA VE-900 chipset (VIA Nano X2 CPU) from 6.8 to 6.9. The box hangs on reboot after upgrade. The last line shown was for azalia. I disabled azalia which then allows 6.9 to boot to completion. Comparing

OBSD 6.8 boot hang on azalia, acpi vs msi issue?

Hi, I updated a box with a VIA VE-900 chipset (VIA Nano X2 CPU) from 6.7 to 6.8 which then hung during first boot with 6.8. The last line was for azalia. I rebooted and disabled azalia which allowed the 6.8 boot to complete. Comparing the dmesg with that from 6.7 showed that the change

SPDIF not working with azalia(4) based card

Hi misc@ I have an azalia(4) based card integrated in my motherboard connected to a receiver through SPDIF, but I can't make it output any sound, only if I connect the cable to the 3.5mm headphone jack. And yes, I already toggled the outputs.mode to digital through mixerctl(1). When I play

Re: Intel C610 azalia (ALC888) not configuring at /dev/audio

which has the Intel C610 > chipset, and the audio codec is the Realtek ALC888, although the latter > is not immediately relevant, as the azalia driver does not even get to > the stage of evaluating the codec; pertinent dmesg output with GENERIC.MP > modified with AZALIA_DEBUG enabled

Intel C610 azalia (ALC888) not configuring at /dev/audio

the latter is not immediately relevant, as the azalia driver does not even get to the stage of evaluating the codec; pertinent dmesg output with GENERIC.MP modified with AZALIA_DEBUG enabled: azalia1 at pci0 dev 27 function 0 "Intel C610 HD Audio" rev 0x05: msi azalia_reset: resetting

Audio issue - azalia, AMD Hudson-2 HD Audio codecs: Realtek ALC269

Hi, I have an Acer Aspire One that has a problem with audio. The audio works for a few minutes (from internal speakers) and then eventually stops playing. I tried with and without headphones, same results. I first started with OpenBSD 6.2-release amd64 installed and noticed the issue. I

Re: azalia(4) partially working on Intel NUC NUC5i7RYH

play.rate=48000 play.channels=2 play.precision=16 play.bps=2 play.msb=1 play.encoding=slinear_le play.pause=1 play.active=0 play.block_size=3840 play.bytes=0 play.errors=0 record.rate=48000 record.channels=2 record.precision=16 record.bps=2 record.msb=1 record.encoding=slinear_le record.pause=1 rec

Re: azalia(4) partially working on Intel NUC NUC5i7RYH

@caoua.org> wrote: >> On Mon, Nov 30, 2015 at 11:09:51AM +0800, Josh wrote: >>> Hi, >>> >>> Running amd64-current (last update at ~5pm UTC 29th Nov), azalia(4) >>> works partially on that NUC NUC5i7RYH device: >>> Recording through audacity for ins

Re: azalia(4) partially working on Intel NUC NUC5i7RYH

out. >> >> Browsed the bug@ but didn't really find something related. Should I >> file a bug report? >> >> Cheers, >> >> On Mon, Nov 30, 2015 at 11:43 AM, Josh <mylis...@gmail.com> wrote: >> > On Mon, Nov 30, 2015 at 11:24 AM, Alexa

Re: azalia(4) partially working on Intel NUC NUC5i7RYH

lated. Should I > file a bug report? > > Cheers, > > On Mon, Nov 30, 2015 at 11:43 AM, Josh <mylis...@gmail.com> wrote: > > On Mon, Nov 30, 2015 at 11:24 AM, Alexandre Ratchov <a...@caoua.org> > wrote: > >> On Mon, Nov 30, 2015 at 11:09:51AM +0800,

Re: azalia(4) partially working on Intel NUC NUC5i7RYH

On Mon, Nov 30, 2015 at 11:09:51AM +0800, Josh wrote: > Hi, > > Running amd64-current (last update at ~5pm UTC 29th Nov), azalia(4) > works partially on that NUC NUC5i7RYH device: > Recording through audacity for instance seems to work as I can see the > amplitude changing whe

Re: azalia(4) partially working on Intel NUC NUC5i7RYH

On Mon, Nov 30, 2015 at 11:24 AM, Alexandre Ratchov <a...@caoua.org> wrote: > On Mon, Nov 30, 2015 at 11:09:51AM +0800, Josh wrote: >> Hi, >> >> Running amd64-current (last update at ~5pm UTC 29th Nov), azalia(4) >> works partially on that NUC NUC5i7RYH devi

azalia(4) partially working on Intel NUC NUC5i7RYH

Hi, Running amd64-current (last update at ~5pm UTC 29th Nov), azalia(4) works partially on that NUC NUC5i7RYH device: Recording through audacity for instance seems to work as I can see the amplitude changing when speaking through the microphone. However, I was unable to get any sound out through

Re: azalia audio works, then stutters until reboot

[I see I sent with too-long lines by mistake; sorry; resending with that corrected.] On 11/23/15 05:11, Alexandre Ratchov wrote: On Fri, Nov 20, 2015 at 10:31:34AM -0700, luke...@onemodel.org wrote: Could the root umask of 0077 be a problem? my /tmp/aucat directory has different permissions

Re: azalia audio works, then stutters until reboot

On Fri, Nov 20, 2015 at 10:31:34AM -0700, luke...@onemodel.org wrote: > > $ls -ltrd /tmp/aucat > drwx-- 2 root wheel 512B Nov 20 09:39 /tmp/aucat/ > $ls -ltr /tmp/aucat > ls: aucat: Permission denied > [and timidity playing a .mid file was working] > [then i killed sndiod with ^C.] > >

Re: azalia audio works, then stutters until reboot

On 11/23/15 05:11, Alexandre Ratchov wrote: On Fri, Nov 20, 2015 at 10:31:34AM -0700, luke...@onemodel.org wrote: Could the root umask of 0077 be a problem? my /tmp/aucat directory has different permissions than yours. The problem is in sndiod; it's supposed create a world readable directory

Re: azalia audio works, then stutters until reboot

On 11/20/15 02:12, Alexandre Ratchov wrote: On Thu, Nov 19, 2015 at 12:48:08PM -0700, luke call wrote: $cat sndiod-log snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup listen(/tmp/aucat/aucat0|ini): created this is very strange, sndiod would have logged all the audio traffic. Could you

Re: Azalia Volume Too Quiet

Daniel Wilkins wrote: > inputs.dac-0:1=150,150 > inputs.dac-2:3=150,150 > inputs.mix_spkr2=248,248 > inputs.mix_spkr3=248,248 > inputs.spkr2=255,255 > outputs.spkr2_dir=output > inputs.spkr3=255,255 > outputs.spkr3_dir=output > outputs.master.slaves=dac-0:1,dac-2:3,spkr,hp,spkr2,spkr3 2 volume

Re: Azalia Volume Too Quiet

On Thu, Nov 19, 2015 at 11:34:53AM +0200, Alexey Suslikov wrote: > 2 volume controls in output path (at least). You probably may try > to limit volume control to DACs > > outputs.master.slaves=dac-0:1,dac-2:3 > > and max out everything else in output path. Or > > outputs.master.slaves=spkr,hp >

Re: Azalia Volume Too Quiet

Sure. You can reply to just the list, by the way; I'm subscribed. inputs.dac-0:1=142,142 inputs.dac-2:3=142,142 record.adc-2:3_mute=off [ off on ] record.adc-2:3=124,124 record.adc-0:1_mute=off [ off on ] record.adc-0:1=124,124 inputs.mix_source=mic2,spkr2,spkr3,beep { mic2 spkr2 spkr3

Re: Azalia Volume Too Quiet

Could you show  the output from mixerctl -av On Thursday, November 19, 2015 7:32 PM, Daniel Wilkins wrote: On Thu, Nov 19, 2015 at 11:34:53AM +0200, Alexey Suslikov wrote: > 2 volume controls in output path (at least). You probably may try > to limit volume

Re: Azalia Volume Too Quiet

There is no direct path to dac in your mixer. I would try to exclude mix from inputs.mix2_source=dac-0:1,mix inputs.mix3_source=dac-2:3,mix. So your outputs.spkr_source will contain mix3 but without mix components. On Thursday, November 19, 2015 10:10 PM, Daniel Wilkins

Re: Azalia Volume Too Quiet

On Thu, Nov 19, 2015 at 10:13:09PM +, Mike Cond wrote: > There is no direct path to dac in your mixer. I would try to exclude mix from > inputs.mix2_source=dac-0:1,mix > inputs.mix3_source=dac-2:3,mix. > > So your outputs.spkr_source will contain mix3 but without mix components. Did a

Re: Azalia Volume Too Quiet

Did you try mixerctl inputs.dac-0:1=255,255                      mixerctl inputs.dac-2:3=255,255                     mixerctl outputs.spkr_source=dac-2:3                     mixerctl  outputs.hp_source=dac-0:1              

Re: Azalia Volume Too Quiet

On Wed, Nov 18, 2015 at 02:27:21PM GMT, Stefan Wollny wrote: > Am 11/18/15 um 01:43 schrieb Daniel Wilkins: > >When I try to play sounds on my Thinkpad T430 I find that the audio's rather > >quiet, I've experimented a bit and found that at about 170 (mixerctl > >outputs.master=170) the volume

Re: Azalia Volume Too Quiet

Am 11/18/15 um 01:43 schrieb Daniel Wilkins: When I try to play sounds on my Thinkpad T430 I find that the audio's rather quiet, I've experimented a bit and found that at about 170 (mixerctl outputs.master=170) the volume stops increasing. It just stays constant from 170 to 255, or at least the

Re: Azalia Volume Too Quiet

Oh, a quick self reply: I've noticed that when I look in audioctl, if I have just oss then lowat = hiwat = 25, with sndio running lowat = hiwat = 8. Not sure if this is helpful information.

Re: Azalia Volume Too Quiet

On Wed, Nov 18, 2015 at 08:15:08PM +, Raf Czlonka wrote: > Stefan, the OP already mentioned (see above) that he had already tried > that and it stays constant. > > On my machine, increasing the volume on 'outputs.mixY', where 'Y' is > '2', did the trick. > > Setting 'outputs.hp_boost=on'

Azalia Volume Too Quiet

When I try to play sounds on my Thinkpad T430 I find that the audio's rather quiet, I've experimented a bit and found that at about 170 (mixerctl outputs.master=170) the volume stops increasing. It just stays constant from 170 to 255, or at least the change is so quiet that I can't hear it. I've

Fw: No sound on speaker with azalia and Intel HD 3400

;j...@jsg.id.au> wrote: On Mon, Nov 16, 2015 at 06:02:38PM +, Mike Cond wrote: > Hello, that is my first post on openbsd mailing list. > I have installed openbsd 5.8 stable on HP Elitebook 2540p and encountered a > problem with sound system. > It's a Intel HD 3400 versio

No sound on speaker with azalia and Intel HD 3400

Hello, that is my first post on openbsd mailing list. I have installed openbsd 5.8 stable on HP Elitebook 2540p and encountered a problem with sound system. It's a Intel HD 3400 version 0.5 . The kernel uses azalia driver. There is sound on hp2 (headphone) but no sound on speaker. I tested all

Re: No sound on speaker with azalia and Intel HD 3400

On Mon, Nov 16, 2015 at 06:02:38PM +, Mike Cond wrote: > Hello, that is my first post on openbsd mailing list. > I have installed openbsd 5.8 stable on HP Elitebook 2540p and encountered a > problem with sound system. > It's a Intel HD 3400 version 0.5 . The kernel uses a

Re: azalia audio works, then stutters until reboot

$cat sndiod-log snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup listen(/tmp/aucat/aucat0|ini): created this is very strange, sndiod would have logged all the audio traffic. Could you check that this is the right file or that programs are not bypassing sndiod for any reason ? It's the

Re: azalia audio works, then stutters until reboot

[sorry for the dupe; correcting the 'from' address.] On 11/07/15 04:20, Alexandre Ratchov wrote: On Fri, Nov 06, 2015 at 05:00:13PM -0700, luke...@onemodel.org wrote: On 09/11/15 11:55, luke...@onemodel.org wrote: [...details are found in original thread at:

Re: azalia audio works, then stutters until reboot

On Fri, Nov 06, 2015 at 05:00:13PM -0700, luke...@onemodel.org wrote: > On 09/11/15 11:55, luke...@onemodel.org wrote: > >Short version: In OpenBSD 5.7 (with all the latest security > >patches), after some video playing, it > >starts to stutter, and doesn't recover until I reboot. Is there > >a

Re: azalia audio works, then stutters until reboot

On Sat, Nov 07, 2015 at 06:27:17AM -0700, luke...@onemodel.org wrote: > [sorry for the dupe; correcting the 'from' address.] > > On 11/07/15 04:20, Alexandre Ratchov wrote: > >On Fri, Nov 06, 2015 at 05:00:13PM -0700, luke...@onemodel.org wrote: > >>On 09/11/15 11:55, luke...@onemodel.org wrote:

Re: azalia audio works, then stutters until reboot

On 11/07/15 12:21, Alexandre Ratchov wrote: sorry, forgot to mention it; please restart sndiod first; this way all the operations that lead to the bug are logged. Then, right after the failure, run the audioctl commands. I rebooted, restarted sndiod -ddd..., sound working with timidity,

Re: azalia audio works, then stutters until reboot

On 09/11/15 11:55, luke...@onemodel.org wrote: Short version: In OpenBSD 5.7 (with all the latest security patches), after some video playing, it starts to stutter, and doesn't recover until I reboot. Is there a way to "reset all the audio" back so it works, short of rebooting? I haven't found

Re: azalia audio works, then stutters until reboot

On 09/12/15 05:25, Alexandre Ratchov wrote: Audio didn't properly recover after missed interrupts (which happens on MP systems). The new audio driver (in 5.8 and -current) is supposed to recover, at least with your hardware. ... I'd suggest trying -current; there's a new audio driver and many

Re: azalia audio works, then stutters until reboot

On 09/12/15 17:56, luke...@onemodel.org wrote: Thanks, good to know. I think I'm better suited for "-stable" than for "-current", currently. So I might wait for 5.8's release then upgrade, or I'd have to figure out if it's a supported configuration to be on -current now then switch back to

Re: azalia audio works, then stutters until reboot

On Fri, Sep 11, 2015 at 11:55:29AM -0600, luke...@onemodel.org wrote: > Short version: In OpenBSD 5.7 (with all the latest security > patches), after some video playing, it > starts to stutter, and doesn't recover until I reboot. Is there > a way to "reset all the audio" back so it works, short of

azalia audio works, then stutters until reboot

from those commands is normal again. They work fully before the audio stuttering starts. The related lines from lspci seem to be: 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1308 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (*rev 01) The pro

Re: Proposed patch to unmute Azalia sound card on Compaq 610

On Tue, Dec 09, 2014 at 07:31:47AM +0100, Alessandro DE LAURENZIS wrote: Hi Jonathan, On Tue 09/12 16:03, Jonathan Gray wrote: I'm curious why you decided to mask the subid here and not just test subid == 0x308a103c ? In my understanding (I'm definitely not an expert), the last part of

Re: Proposed patch to unmute Azalia sound card on Compaq 610

I'm curious why you decided to mask the subid here and not just test subid == 0x308a103c ? On Sun, Dec 07, 2014 at 03:46:13PM +0100, Alessandro DE LAURENZIS wrote: Greetings, Some days ago I installed OBSD 5.6 on my old Compaq 610 laptop (a pretty standard CORE2 Duo 2010 machine - yes, I

Re: Proposed patch to unmute Azalia sound card on Compaq 610

Hi Jonathan, On Tue 09/12 16:03, Jonathan Gray wrote: I'm curious why you decided to mask the subid here and not just test subid == 0x308a103c ? In my understanding (I'm definitely not an expert), the last part of subid represents the vendor signature (HP in this case); the first 4 digits

Proposed patch to unmute Azalia sound card on Compaq 610

Greetings, Some days ago I installed OBSD 5.6 on my old Compaq 610 laptop (a pretty standard CORE2 Duo 2010 machine - yes, I know that standard is a kind of hard concept in the i386/amd64 world...), dmesg in [1]. Great hardware support, except that sound card was completely silent (dmesg with

Re: Recording from azalia does not work

On Tue, Jun 26, 2012 at 09:16:38AM +0200, Alexandre Ratchov wrote: On Mon, Jun 25, 2012 at 10:53:34AM +0200, Gregor Best wrote: I'm trying to get recording from the mic input of my laptop working, but have not have success so far. I'm using a thinkpad laptop with an azalia device

Re: Sound - Azalia Codecs

=120,120 record.volume.mute=off [ off on ] record.volume.slaves=adc-0:1 { adc-0:1 } *** I do not see any hp or line-out outputs and I am unsure what to make of the empty sel2_source. The notebook chipset is Via based *** dmesg | grep azalia azalia0 at pci4 dev 1 function 0 VIA HD

Sound - Azalia Codecs

of the empty sel2_source. The notebook chipset is Via based *** dmesg | grep azalia azalia0 at pci4 dev 1 function 0 VIA HD Audio rev 0x10: apic 1 int 17 azalia0: codecs: VIA/0x1708 audio0 at azalia0 *** The Windows drivers for the same notebook use the ALC 655 azalia codec. The ALC 655

Re: Recording from azalia does not work

On Tue, Jun 26, 2012 at 09:46:23PM -0700, patrick keshishian wrote: [...] sleep-wake cycle test? I had the problem again, and indeed, suspending the machine with zzz and resuming it fixes audio input. Is there anything I can do to investigate this? Dump some hardware registers before and

Re: no sound azalia(4)

as Jan said, the sound card is getting the signal; but according to the mixerctl output, your card has 3 independent stereo dacs, so you could try to kill sndiod and start it as follows: sudo sndiod -dd -c0:5 to force it to send the signal to all outputs (hopefully the speaker is one of

Re: no sound azalia(4)

On 02/28/13 09:53, Alexandre Ratchov wrote: as Jan said, the sound card is getting the signal; but according to the mixerctl output, your card has 3 independent stereo dacs, so you could try to kill sndiod and start it as follows: sudo sndiod -dd -c0:5 to force it to send the signal to

Re: no sound azalia(4)

On Thu, Feb 28, 2013 at 06:19:14PM +0100, Martijn van Duren wrote: On 02/28/13 09:53, Alexandre Ratchov wrote: as Jan said, the sound card is getting the signal; but according to the mixerctl output, your card has 3 independent stereo dacs, so you could try to kill sndiod and start it as

Re: no sound azalia(4)

On 02/28/13 18:33, Alexandre Ratchov wrote: On Thu, Feb 28, 2013 at 06:19:14PM +0100, Martijn van Duren wrote: On 02/28/13 09:53, Alexandre Ratchov wrote: as Jan said, the sound card is getting the signal; but according to the mixerctl output, your card has 3 independent stereo dacs, so you

Re: no sound azalia(4)

On Feb 27 07:59:46, martijn...@gmail.com wrote: On Tue, 2013-02-26 at 23:36 +0100, Jan Stary wrote: On Feb 26 23:25:17, martijn...@gmail.com wrote: Hello misc, I'm having troubles setting up my sound system on my openbsd-current laptop, a quite old Sony Vaio PCG-7H2M. If anyone has

Re: no sound azalia(4)

On Wed, 27 Feb 2013 10:12:31 +0100, Jan Stary wrote: On Feb 27 07:59:46, martijn...@gmail.com wrote: On Tue, 2013-02-26 at 23:36 +0100, Jan Stary wrote: On Feb 26 23:25:17, martijn...@gmail.com wrote: Hello misc, I'm having troubles setting up my sound system on my

Re: no sound azalia(4)

On Wed, 2013-02-27 at 13:07 +0100, Tim van der Molen wrote: On Wed, 27 Feb 2013 10:12:31 +0100, Jan Stary wrote: On Feb 27 07:59:46, martijn...@gmail.com wrote: On Tue, 2013-02-26 at 23:36 +0100, Jan Stary wrote: On Feb 26 23:25:17, martijn...@gmail.com wrote: Hello misc,

Re: no sound azalia(4)

On 02/27/13 13:07, Tim van der Molen wrote: On Wed, 27 Feb 2013 10:12:31 +0100, Jan Stary wrote: On Feb 27 07:59:46, martijn...@gmail.com wrote: On Tue, 2013-02-26 at 23:36 +0100, Jan Stary wrote: On Feb 26 23:25:17, martijn...@gmail.com wrote: Hello misc, I'm having troubles setting up my

Re: no sound azalia(4)

On Feb 27 18:32:37, martijn...@gmail.com wrote: On 02/27/13 13:07, Tim van der Molen wrote: On Wed, 27 Feb 2013 10:12:31 +0100, Jan Stary wrote: On Feb 27 07:59:46, martijn...@gmail.com wrote: On Tue, 2013-02-26 at 23:36 +0100, Jan Stary wrote: On Feb 26 23:25:17, martijn...@gmail.com wrote:

Re: no sound azalia(4)

Use SNDIO_DEBUG with the application you use to play the sound. $ env SNDIO_DEBUG=1 play file.mp3 aucat_open: host= unit=0 devnum=0 opt=default /tmp/aucat-1000/aucat0: No such file or directory aucat: start, maxwrite = 0 file.mp3: File Size: 4.52M Bit Rate: 128k Encoding: MPEG audio

no sound azalia(4)

Hello misc, I'm having troubles setting up my sound system on my openbsd-current laptop, a quite old Sony Vaio PCG-7H2M. If anyone has any idea of what the problem could be and has tips on how to solve it, it would be highly appreciated. My audioctl: name=HD-Audio version=1.0 config=azalia0

Re: no sound azalia(4)

On Feb 26 23:25:17, martijn...@gmail.com wrote: Hello misc, I'm having troubles setting up my sound system on my openbsd-current laptop, a quite old Sony Vaio PCG-7H2M. If anyone has any idea of what the problem could be and has tips on how to solve it, it would be highly appreciated. What

Re: no sound azalia(4)

On Tue, 2013-02-26 at 23:36 +0100, Jan Stary wrote: On Feb 26 23:25:17, martijn...@gmail.com wrote: Hello misc, I'm having troubles setting up my sound system on my openbsd-current laptop, a quite old Sony Vaio PCG-7H2M. If anyone has any idea of what the problem could be and has tips

Re: azalia audio: Sound distorted

Hello, Christian Weisgerber naddy at mips.inka.de writes: Mark Kettenis: Does the diff below fix the problem? Yes, it does. The diff works for me too. Many thanks to you all for your help. Alexander

Re: azalia audio: Sound distorted

On Aug 09 23:12:27, Alexander Shendi (web.de) wrote: Hello, I am currently running a snapshot of OpenBSD-current (amd64) as of 31st July, 2012. I am having audio problems, i.e. the sound is distorted when playing an mp3 or ogg-file. How exactly do you play it? Do you run sndiod? How

Re: azalia audio: Sound distorted

Jan Stary h...@stare.cz wrote: I am currently running a snapshot of OpenBSD-current (amd64) as of 31st July, 2012. I am having audio problems, i.e. the sound is distorted when playing an mp3 or ogg-file. How exactly do you play it? Do you run sndiod? How exactly? I got a new Ivy

Re: azalia audio: Sound distorted

Does the diff below fix the problem? Index: azalia.c === RCS file: /cvs/src/sys/dev/pci/azalia.c,v retrieving revision 1.200 diff -u -p -r1.200 azalia.c --- azalia.c10 May 2012 22:46:48 - 1.200 +++ azalia.c10 Aug

Re: azalia audio: Sound distorted

Mark Kettenis: Does the diff below fix the problem? Yes, it does. --- azalia.c 10 May 2012 22:46:48 - 1.200 +++ azalia.c 10 Aug 2012 16:22:12 - @@ -461,6 +461,7 @@ azalia_configure_pci(azalia_t *az) case PCI_PRODUCT_INTEL_3400_HDA: case

Re: azalia audio: Sound distorted

Christian Weisgerber naddy at mips.inka.de writes: Mark Kettenis: Does the diff below fix the problem? Yes, it does. --- azalia.c10 May 2012 22:46:48 - 1.200 +++ azalia.c10 Aug 2012 16:22:12 - @@ -461,6 +461,7 @@ azalia_configure_pci(azalia_t *az)

azalia audio: Sound distorted

Hello, I am currently running a snapshot of OpenBSD-current (amd64) as of 31st July, 2012. I am having audio problems, i.e. the sound is distorted when playing an mp3 or ogg-file. Sometimes even cat /dev/zero /dev/audio leads to errors (as reported by audioctl play.errors). Should I try a

Re: Recording from azalia does not work

On Mon, Jun 25, 2012 at 10:53:34AM +0200, Gregor Best wrote: Hi people, I'm trying to get recording from the mic input of my laptop working, but have not have success so far. I'm using a thinkpad laptop with an azalia device and a pretty run of the mill headset, attached to headphone out

Re: Recording from azalia does not work

On Tue, Jun 26, 2012 at 09:16:38AM +0200, Alexandre Ratchov wrote: [...] this seems correct at first glance; could you see whether the recorded file is full of silence (zeros) or noise (numbers close to zero)? aucat -o /tmp/foo and then: hexdump /tmp/foo |less noise would mean that

Re: Recording from azalia does not work

On Tue, Jun 26, 2012 at 7:23 AM, Gregor Best g...@ring0.de wrote: On Tue, Jun 26, 2012 at 09:16:38AM +0200, Alexandre Ratchov wrote: [...] this seems correct at first glance; could you see whether the recorded file is full of silence (zeros) or noise (numbers close to zero)? aucat -o

Recording from azalia does not work

Hi people, I'm trying to get recording from the mic input of my laptop working, but have not have success so far. I'm using a thinkpad laptop with an azalia device and a pretty run of the mill headset, attached to headphone out and microphone in. The headset itself works fine on other machines

Radeon 4200 and azalia audio problems

I recently upgraded to the most recent (Jan. 26) snapshot from a system built from source on Jan. 24th, with mixed results: (dmesg follows) - Jan. 24th: using the xf86-video-ati-6.14.3.tar.gz driver from x.org, mplayer video output was jittery, like the driver couldn't keep up, but audio was

Re: Radeon 4200 and azalia audio problems

On Sat, 28 Jan 2012 15:20:27 -0500 Scott McEachern sc...@blackstaff.ca wrote: [*1] - I'm not sure exactly when this popped up matthieu@ updated the ati driver recently. (yesterday? check the source-changes@ archives, http://www.openbsd.org/faq/current.html ) ati cards are now all attached to

Only noise from Azalia

I can get only noise from the audio of a notebook Acer Aspire 5820T-6825. OpenBSD uranio.dlg 4.9 GENERIC.MP#6 amd64 The snapshots until 9051478 Jan 9 14:51 bsd.mp have not worked. dmesg, audioctl -a and mixerctl -av are attached. I do need your help. Thank you. --Jairo Souto

  1   2   3   4   >