. ?
Im running OpenBSD 7.4 Stable on amd 64
I have upgraded to OpenBSD 7.5 snapshot and updated the Fastnetmon package
Thanks
Tom Smyth
On Fri, 23 Feb 2024 10:49:05 -0700
Ian Timothy wrote:
> > On Feb 23, 2024, at 10:33, Tom wrote:
> >
> > command `ssh user@fe80::262:bff::@em0` works just fine.
> >
> > `ssh -J user9001@jumpserver user@fe80::262:bff::%em0`
>
> Don’t know
Hi list!
Could you please guide me how to use link-local addresses with jumphost?
I have a server 'X' with a link local IPv6 address of
fe80::262:bff::
that IP is reachable from the server 'jumpserver' via interface em0,
command `ssh user@fe80::262:bff::@em0` works just fine.
Thanks for that...
Ill setup a test system so ... Thanks
On Thu, 13 Apr 2023 at 07:33, Stuart Henderson
wrote:
>
> On 2023-04-12, Tom Smyth wrote:
> > does anyone have experience on running coverity on OpenBSD ...
> > Im trying to scan a port im maintaining at the minute
Folks,
does anyone have experience on running coverity on OpenBSD ...
Im trying to scan a port im maintaining at the minute...
there does not seem to be binaries for coverity for OpenBSD
Tjanks
--
Kindest regards,
Tom Smyth.
to your ospf area in your ospfd.conf file
Note when you redistribute a static address it will appear as an
external route in the
The link state advertisements from the router ... (it wont be an intra
area route) which can affect the route metric during the route
selection process...
Thanks
Tom Smyth
safer not to) - smokeping_fcgi
> > > does not chroot.
> > >
> > >
> > Hmm, I did this on the basis of a post by you (5/11/20) in response to Tom
> > (5/10/20) which I interpreted as needing several files moved into www
> > "jail."
>
> No th
> > You shouldn't need that bit (and it is safer not to) - smokeping_fcgi
> > does not chroot.
> >
> >
> Hmm, I did this on the basis of a post by you (5/11/20) in response to Tom
> (5/10/20) which I interpreted as needing several files moved into www "jail."
Folks,
just on this changing the binary /usr/sbin/dig... to /usr/bin/dig and
going from 7.2 to 7.3 massive drop in latency of queries in a local
dns server in the same datacentre ...
just thought it would be useful ... before and after smoke graph below
On Tue, 7 Mar 2023 at 14:30, Tom Smyth
is way faster ... for the user interface... ... Ill let you know if
there are any negative impact on the graphs ...
Thanks
Tom Smyth
On Wed, 8 Mar 2023 at 15:21, Tom Smyth wrote:
>
> Hello
> I found that RRDCached helps with the gaps in the graphs... (write
> i/o burst sm
4:16, Stuart Henderson wrote:
>
> On 2023/03/07 14:38, Tom Smyth wrote:
> > the config below seems to get rrdcached working with httpd in OpenBSD. ...
>
> Thanks, I've added this to the pkg-readme.
>
> > the loading of the smokeping detailed graphs still takes a while ..
ePing of Wireless Connect Ltd. \
This Tool Shows the latency of the \
Wireless Connectnetwork.
alerts =
Sustained_5%_loss,Sudden_10%_Loss,Sporadic_Loss,Latency_Over_50ms,Offline_at_startup
#####config-sniped#
smoke1# rcctl ls started
cron
dhcpleased
ht
0 1264K 1956K idle kqread0:00 0.00% ntpd
30532 root 20 1716K 2164K idle kqread0:00 0.00% smtpd
On Tue, 7 Mar 2023 at 08:36, Stuart Henderson wrote:
> On 2023/03/07 07:10, Tom Smyth wrote:
> > I m running smokeping fcgi and rrdcached ontop of OpenbSD, to smok
Hi Peter,
Thanks for that ... you are 100% correct... I was caught off guard with
that thanks ...
I Think I need to go through my upgrades ... for more RmFiles... :/
Thanks it worked just fine...
Much Obliged,
Tom Smyth
On Tue, 7 Mar 2023 at 12:48, Peter Hessler wrote:
> On 2023
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (59cdf031e4c1fe67.a) swap on sd0b dump on sd0b
smoke1# uname -va
OpenBSD smoke1server.com 7.3 GENERIC.MP#1094 amd64
--
Kindest regards,
Tom Smyth.
ol Shows the latency of the \
Wireless Connectnetwork.
alerts =
Sustained_5%_loss,Sudden_10%_Loss,Sporadic_Loss,Latency_Over_50ms,Offline_at_startup
#config-sniped#########
smoke1# rcctl ls started
cron
dhcpleased
httpd
ntpd
pflogd
resolvd
rrdcached
smokeping
smokeping_fcgi
smtpd
sshd
syslogd
--
Kindest regards,
Tom Smyth.
; id=5
> 12 0.26551410.10.2.1 ? 10.10.2.10 RADIUS 161
> Access-Challenge id=5
> 13 0.266328 10.10.2.10 ? 10.10.2.1RADIUS 191 Access-Request
> id=6
> 14 0.28460710.10.2.1 ? 10.10.2.10 RADIUS 226 Access-Accept id=6
>
> Question: How to avoid altering fragment_size to get this working ?
>
> Some clients could not be set so easily like phones.
>
> Thank you.
>
> Mikhael.
>
>
--
Kindest regards,
Tom Smyth.
this issue (of network
timeouts for certain applications
I hope this helps,
Tom Smyths
On Mon, 6 Feb 2023 at 15:41, Riccardo Mottola
wrote:
> Hi,
>
> Rodrigo Readi wrote:
> > Can someone recommend a lightweight Browser that support javascript?
>
> "Lightw
t;
> $ cat /etc/hostname.vr3
> inet 10.1.111.1 255.255.255.0
>
> $ cat /etc/ospfd.conf
> router-id 10.109.3.15
> redistribute connected
>
> area 0.0.0.0 {
> interface vr0
> interface vr3
> }
>
> Thanks,
> Radek
>
>
--
Kindest regards,
Tom Smyth.
(ususally ) moan about it
watch your mac address table size and your hardware capacity on your
switch...with this stuff... (know your switch hardware capacity and specs)
i hope ths helps...
On Wed, 25 Jan 2023 at 15:14, Cristian Danila wrote:
> Thank you so much Tom and David for giving me id
minimising broadcast waste of bandwidth (on large
wireless access networks)
On Tue, 24 Jan 2023 at 23:53, David Gwynne wrote:
>
>
> > On 25 Jan 2023, at 09:47, Tom Smyth
> wrote:
> >
> > Hi David is that like a local proxy arp type setup (on typical
> > netwo
ARP for. eg:
>
> $ cat /etc/commarp.conf
> interface em0 {
> allow 192.168.1.16 - 192.168.1.254
> }
>
> There’s no point rewriting ARP requests for the IP your router is using on
> that subnet, or carp addresses on that subnet, etc.
>
>
> > On 24 Jan 2023,
nyone using RAID5 with SSD drives? How is the write speed there?
>
> Best wishes,
> Atanas
>
--
Kindest regards,
Tom Smyth.
this helps...
On Tue, 24 Jan 2023 at 12:24, Claudio Jeker wrote:
>
> On Tue, Jan 24, 2023 at 11:43:08AM +0000, Tom Smyth wrote:
> > Hello Cristian,
> > if you want to filter on layer 2 ... you would need to use Bridge
> > have a look at man ifconfig(8)
> > bridge filt
t I miss a
> starting point and I would
> really appreciate any hint.
>
> Kind regards,
> Claudiu
>
--
Kindest regards,
Tom Smyth.
> expecting some kind of issue, but when I told him they were dc(4)s,
> he was disappointed and said, "Well, of course those will work".
>
> I had a machine for a while with something like ten or
> eleven em(4)s in it, I had fired it up, don't recall seeing any
> problems with it identifying all the ports (in fact, iirc, it found
> a port on the MoBo that was not extended to the outside). Again,
> no issue, but after staring at the power hungry box for many years
> and never doing anything with it, it finally got recycled. Again,
> that was many releases ago...so not sure how it applies today.
>
> Current FW box is a old citrix appliance with a six port NIC and two
> onboard ports, for eight em(4)s.
>
> Nick.
>
--
Kindest regards,
Tom Smyth.
D host (vmx)
>
> I am asking because I am running an OpenBSD on a VMware host but apparently
> OpenBSD can only see 8 of them.
>
> Can I raise the limit somehow?
>
> Regards, Lars.
--
Kindest regards,
Tom Smyth.
on mikrotik
> RB5009UG+S+IN and cisco 2960 switch. On aruba 2540 (allow unsupported
> transceiver), ibm switch and openbsd ix(4) it won't work.
>
> I've ordered few BiDi sfp from fs.com and maybe my ISP will lend me
> MaxLink sfp so I could test them in lab.
>
> Thank you Stuart for information ...
>
--
Kindest regards,
Tom Smyth.
prefixes to your upstream peers...
man bgpd.conf will show any other syntax that may be depreciated... (
I have nevever set the softreconfig I *think* it is now a default ...
I hope this helps,
Tom Smyth
On Mon, 19 Dec 2022 at 11:59, Toni Mueller wrote:
>
>
> Hi,
>
> I am tr
want to decend into
plugging a propietary solution ...
I hope this helps
Tom Smyth
On Mon, 12 Dec 2022 at 22:35, Stuart Henderson
wrote:
>
> On 2022-12-12, c0ry wrote:
> > Hey folks,
> >
> > I noticed this line in the VMM FAQ (
> > https://www.ope
##
On Mon, 28 Nov 2022 at 21:46, Tom Smyth
wrote:
> Hello, Folks,
>
> Im reviewing our filesystem setup for OpenBSD CPEs that we deploy in the
> field
>
> in order to minimise the impact of Power Outages / Customer interference
> on the boxes,
> we install a 4G root partition
/dev/MAKEDEV /persist-fs/dev/
cd /persist-fs/dev/
/persist-fs/dev/MAKEDEV all
any feedback welcome, are there other folders that could be heavily written
to ?
is there shortcommings I have ommited swap (because of flash and ssd wear
concerns)
I hope this helps...
Tom Smyth
--
Kindest regards
/www.pcengines.ch/wle200nx.htm
>
> If you would build today an accesspoint, on hardware with miniPCI, what
> would you choose, for OpenBSD?
>
> --
> Regards,
> Mikolaj
>
>
--
Kindest regards,
Tom Smyth.
yeah 0.0.0.0/32 ,( legacy broadcast address is a valid address and would be
included in very verbose explicit rules blocking traffic from invalid src
addresses ( for example)
hope this helps
On Fri 11 Nov 2022, 20:23 3, wrote:
> a very clever man once said that God does not play dice.. and he
passowrds listed on a card , and ask
the user to enter password X ?
Thanks,
Tom Smyth
On Wed, 2 Nov 2022 at 02:14, Stuart Henderson
wrote:
> If anyone's got any good suggestions on how to do VPNs with 2FA
> on an OpenBSD gateway for non-technical users to access (iOS, Android,
>
Hi Jesse,
you can check out https://www.openbsd.org/want.html perhaps there is an
overlap between developers requirements and what you have surplus,
it is a voluntary project so consider donating some hardware to the
developers according to that list,
Hope this helps,
Tom Smyth
On Fri, 7
howdy Steve...
on newer versions of openBSD open SMTPD
legacy tls versions / ciphers are disabled by default...
there is an option to allow legact tls versions ( i cant remember the
option off hand but man smtpd.conf and search for tls you should find it
handy enough...( this caught me out on an
os over
> > > the entire USB stick before expecting it to actually work. Nothing to
> > > do with the T5500.
>
> I am puzzled: how exactly is a zero filled USB stick
> less panicky than another USB stick?
>
>
--
Kindest regards,
Tom Smyth.
be a separate card or i/o
module to the onboard sata ...
Hope this helps
On Wed, 7 Sept 2022 at 12:19, Erling Westenvik
wrote:
> On Wed, Sep 07, 2022 at 11:41:49AM +0100, Tom Smyth wrote:
> > hi
> >
> > i would check bios / firmware settings
> >
> > try disabling memory
hi
i would check bios / firmware settings
try disabling memory mapped i/o in bios
check processor settings enable vt-d disable hyper threading ensure execute
disable is enabled
update the bios as it will update cpu microcode ...
dell alow you to select the emulation of sata
ahci vs raid
has an idea, please let me know.
>
> Best regards
> Florian
>
>
--
Kindest regards,
Tom Smyth.
valid..
I hope this helps,
Tom Smyth
On Wed, 13 Jul 2022 at 02:38, Tobias Fiebig <
tob...@reads-this-mailinglist.com> wrote:
> Heho,
> I am running OpenBGPd (on 7.1+binpatches), and have some tunnel links
> between hosts and up/downstreams over wg tunnels.
>
> I am basica
hi Adriano
can you just restart httpd with
rcctl restart httpd
did your ip addresses on external interface change ?
what are the loadef firewall rules
Thanks
Tom Smyth
On Thu 23 Jun 2022, 00:05 Adriano Barbosa, wrote:
> Hi.
>
> My httpd was working perfectly for the las
Hello Folks Im in Brussles for the evening if anyone wants to meet up
--
Kindest regards,
Tom Smyth.
es do not perform
> in the circus
>
--
Kindest regards,
Tom Smyth.
in tunnels (layer3) )
the benefit of being able to send the full packet over the fragmented
tunnel does not in any way increase perf...
and the TCP MSS clamping gives the best throughput (in my experience) ...
Thanks again,
Tom Smyth
On Sun 15 May 2022, 21:02 Stuart Henderson,
wrote:
> On 2022-05
ace)
the Router on the VPN wont sent a Fragment needed IP message to the
client because the MTU of the Tunnel was not exceeded
(but the MTU on the underlay was exceeded)
I hope the clarifications helps and that im right or at least that I
learn something new :)
Thanks
Tom Smyth
On Sun,
i have knowledge of
>
> - "more information in pf.conf": yes there is information in pf.conf on
> mtu, mss, and nat, including the syntax for using them. again, why
> wouldn;t we point people there?
>
> i'm happy to try and rework the text if you think it can be improved.
>
> jmc
>
--
Kindest regards,
Tom Smyth.
Hello all,
Thanks for the feedback it is really helpful to have peoples
experiences in the wild to
help feed into the training course content. and certainly better than
just my humble experience
I really appreciate all of your feedback.
Thanks again folks,
Tom Smyth
Tom Smyth
On Fri, 13 May
regards,
Tom Smyth.
or balanced
I hope this helps,
( and thanks for your patience with my previous impulsive (albeit
trying to help) replies earlier
Tom Smyth
On Fri, 15 Apr 2022 at 11:12, Stuart Henderson
wrote:
>
> On 2022-04-14, Stefan Sperling wrote:
> > On Thu, Apr 14, 2022 at 09:26:41PM -, Stuart Hen
to the preemption timer on the
Proxmox Host
Sorry for bombing the list on this one ...
On Thu, 14 Apr 2022 at 22:54, Tom Smyth wrote:
>
> Stuart,
> sorry I wasnt entirely clear in my last email
>
> 1) you can try the /sys/module/kvm_intel/parameters/preemption_timer
>
> if the s
I have an Intel based Proxmox 7.1 being built pre-Production Ill have
a go with it... Tomorrow and let you know
On Thu, 14 Apr 2022 at 22:54, Tom Smyth wrote:
>
> Stuart,
> sorry I wasnt entirely clear in my last email
>
> 1) you can try the /sys/module/kvm_intel/parameters/p
Kernel sorted it
On Thu, 14 Apr 2022 at 22:45, Tom Smyth wrote:
>
> Stuart
>
> is your host on an Intel System ?
>
> I had an awful time with Proxmox 5.0 and 5.1
>
> with clock drift and console freezes
>
> can you try to disable the following feature in the Proxm
irq 6 drq 2
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB Tablet"
> rev 2.00/0.00 addr 2
> uhidev0: iclass 3/0
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (cf14a346fbf0559d.a) swap on sd0b dump on sd0b
> fd0 at fdc0 drive 1: density unknown
>
>
>
--
Kindest regards,
Tom Smyth.
Steve,
if you like books ...
Peter Hansteen has written a book the book of pf
which I have read and would recommend
https://nostarch.com/pf3
and if you are interested in firewalls ingeneral and comparing features
On Thu, 7 Apr 2022 at 10:40, Tom Smyth wrote:
>
> Hi Steve,
> Im goin
of Openbsd you are running ...
man pfctl or man pf.conf will help you ...
if you need a intro to the intro ...
https://openbsdjumpstart.org by Wesley is pretty cool and gets you
started on OpenBSD and PF
Hope this helps,
Tom Smyth
On Thu, 7 Apr 2022 at 10:28, Brodey Dover wrote:
>
> To be
:/usr/src/lib/libssl/tls13_lib.c:150:
> lost connection after STARTTLS from mout.web.de
>
> Can anybody with more knowledge of libressl and it's error messages tell by
> this error what is wrong?
>
> Best regards,
> Stephan
>
--
Kindest regards,
Tom Smyth.
Hey David thanks for reply makes more sens to me now ... Thanks again...
Tom Smyth
On Sat, 2 Apr 2022 at 04:11, David Gwynne wrote:
>
> loopback interfaces are special and kind of end up representing an rdomain
> inside the kernel, which is where this restriction comes from
: Operation not permitted
tobsd# ifconfig
--
Kindest regards,
Tom Smyth.
ng something, or is this a bug? If the latter, is this email
> sufficient to get it looked at, or i would need to report it more
> formally?
>
> Thanks,
> ITwrx
>
>
--
Kindest regards,
Tom Smyth.
e all the
> dangerous functions, you can hardly use PHP. And then.. its on the PHP
> level, sooo. But maybe every little bit counts?
>
> Anyway, what are you guys doing if you're running PHP in production on
> OpenBSD? Besides from NOT running PHP in production at all.
>
> Kindest regards.
>
> --
> Sent with Tutanota, the secure & ad-free mailbox.
>
--
Kindest regards,
Tom Smyth.
Hello all, just following up on this as a call out to anyone who use nsh
or have used it in the past,
if you have any feedback / suggestions I would really appreciate that,
Thanks
Tom Smyth
On Sun, 18 Apr 2021 at 13:31, Tom Smyth
wrote:
> Hello,
>
> If anyone has used shells/
recipients up front with a message of your choosing:
filter validuser phase rcpt-to match !rcpt-to \
reject "550 5.1.1 Mailbox does not exist"
and then include that filter in the chain for the exchanger listener.
HTH,
Tom
>
>
> Configurations are below; thank you very much
is pf allowing tcp port53 as well as udp port53 ?
On Wed 19 Jan 2022, 11:46 Laura Smith,
wrote:
> Hi
>
> OpenBSD NSD slave is driving me nuts with the following message in the
> logs "Could not tcp connect to X Operation timed out".
>
> The answer sounds obvious, but I can:
>
> - Ping the IP
>
i think u need to do as root or configure doas to perform privleged
operation...
On Thu 13 Jan 2022, 17:26 Rob Whitlock, wrote:
> Attempting to extract xenocara.tar.gz while avoiding root proviliges as
> described here https://www.openbsd.org/faq/faq5.html#wsrc, I ran into an
> error, shown
... It is awesome ...
Tom Smyth
On Wed, 5 Jan 2022 at 16:09, Sean McBride wrote:
> Hi all,
>
> (Newbie and first time poster, please be gentle :))
>
> I'm trying to set up spamd, and I think I'm having trouble with pf. So
> I tried to add a very basic test rule. I added to the b
again, Really appreciate your
Tom Smyth
On Wed, 22 Dec 2021 at 11:26, Stuart Henderson
wrote:
> On 2021-12-22, Dirk Coetzee wrote:
> > Hi Tom,
> >
> > I would recommend debugging using "unbound-control stats_noreset" and
> referencing the unbound conf
THanks Dirk Ill give that a go
Cheers,
Tom Smyth
On Wed, 22 Dec 2021 at 00:30, Dirk Coetzee wrote:
> Hi Tom,
>
> I would recommend debugging using "unbound-control stats_noreset" and
> referencing the unbound configuration documentation at
> https://www.nlnetlabs
Sorry forgot to say running OpenBSD on an amd64, and hosted in a KVM
environment,
Thanks
Tom Smyth
On Tue, 21 Dec 2021 at 21:15, Tom Smyth
wrote:
> Recommendations on Buffer Space for Busy Unbound Resolver Service for a
> network serving a 3000, customers
>
> Thanks
>
Recommendations on Buffer Space for Busy Unbound Resolver Service for a
network serving a 3000, customers
Thanks
--
Kindest regards,
Tom Smyth.
thanks
--
Kindest regards,
Tom Smyth.
13.9.2021. 12:58, Tom Smyth wrote:
> > Hi Hrvoje,
> >
> > is 10.90.0.0/24 <http://10.90.0.0/24> local to your firewall, and if I
> > understand your rule,
> > ike esp from 10.90.0.0/24 <http://10.90.0.0/24> to anyyou are
> saying
> > encryp
se point me in the right direction on what to look and
> configure?
>
> Thank you ..
>
>
--
Kindest regards,
Tom Smyth.
you might be able to statically configure
> > it, if not then you could modify vpnc-script to have it update the
> > address in unwind.conf and reload it.
>
> Thanks, this works somewhat:
>
> forwarder { $ip1 $ip2 }
> force accept bogus forwarder { $internal_domain1 }
&g
Am 2021-07-14 13:01, schrieb Stefan Sperling:
If the demote count never drops then perhaps pfsync traffic isn't
passing
properly?
tcpdump on pfsync device shows me PFSYNCv6 traffic all the time
as well comparing the results of "pfctl -s state" on both
systems shows no differences. The same
but why? If I reboot the other node, the system become MASTER.
That is because the other system stops sending carp announcements
when you reboot it. This is unrelated to the demote counter. The demote
counter only matters as long as another carp MASTER remains visible.
A forced failover like
2021-07-13 18:12, schrieb Jorge Peixoto:
Tom,
Assuming the fw cluster is properly set up, I guess because PF rule
states is unsync.
As times goes by, states gets synchronized.
JP
system as
expected.
This ar physical machines. I try to simulate this on vmware, but there
is everything fine. Both system starting with demote count 0.
I would appreciate any hint to understand this.
Tom
not possible with udp?
>
> Axel
> ---
> PGP-Key: CDE74120computing @ chaos claudius
>
--
Kindest regards,
Tom Smyth.
regards.
Tom
.
Best regards.
Tom
On 2021-05-04 13:58, Nam Nguyen wrote:
Hrvoje Popovski writes:
Problem is that when i should get login screen, gdm to ask me for user
and password, i'm getting blank grey screen ..
after moving through terminals with ctrl-alt fX, from time to time i can
get this (screenshot
68.163.94.443 > x.y.z.171.53: [no udp cksum] 1+ RRSIG?
> pizzaseo.com.(30) (ttl 249, id 55913, len 58)
> 0800 532: x.y.z.171.53 > 146.168.163.94.443: [udp sum ok] 1- 0/13/14(490)
> (ttl 62, id 53578, len 518)
>
>
> What is wrong in my setup?
>
> Thanks, Axel
> ---
> PGP-Key: CDE74120computing @ chaos claudius
>
--
Kindest regards,
Tom Smyth.
ant ,for now anyway,
Ill do a little digging on FFS and FFS2 and see how the filesystem
database (or table)
is structured...
Thanks for the feedback it is very helpful to me
All the best,
Tom Smyth
On Wed, 21 Apr 2021 at 15:25, Christian Weisgerber wrote:
>
> Tom Smyth:
>
> > i
to reduce wear on SSDs, and improve performance
in Virtualized Environments with large allocation units on what ever storage
subsystem they are running.
Thanks for your time
Tom Smyth
On Wed, 21 Apr 2021 at 08:49, Otto Moerbeek wrote:
>
> On Wed, Apr 21, 2021 at 08:20:10AM +0100, Tom
hardware)
Thanks
Tom Smyth
On Tue, 20 Apr 2021 at 22:52, Christian Weisgerber wrote:
>
> Tom Smyth:
>
> > just installing todays snapshot and the default offset on amd64 is 64,
> > (as it has been for as long as I can remember)
>
> It was changed from 63 in 20
but It might
be worth re-visiting as it would
make for more straightforward aligned partitions on OpenBSD installs..
my experience is more for x86 / amd64 rather than other platforms ..
Kindest Regards,
Tom Smyth
--
Kindest regards,
Tom Smyth.
in NSH that you can do in base.
We will be working on it to track current, and hopefully
7.0 release.
Thanks
Tom Smyth
I think i know what it is, but i'm not sure
> since it was so long ago.
> Therefore booting into single user mode is probably the only choice for
> option 1.
>
> Thank you for your suggestions.
>
> Br, Ales
>
>
--
Kindest regards,
Tom Smyth.
od context and insights...
but refer to the manuals also to validate any improved syntax and or
features
Hope this helps
Tom Smyth
On Tue, 13 Apr 2021 at 09:34, jannick Weiss wrote:
>
> Hello,my name is Jannick Weiss and i am currently in the process of taking
> my education as a datatechni
:
>
> On Sat, Apr 10, 2021 at 10:22:17PM +0100, Tom Smyth wrote:
> > Hello,
> >
> > 1) issue does not occur with fvwm or with chrome running in fvwm
> >
> > so the issue seems to be confined to xfce, and I was running just 1
> > xfce terminal session
>
Geoff,
The force is strong with you :)
Thanks that worked xfce-screensaver was active but I was not seeing
the screen-saver
Appreciate your help
Tom Smyth
On Sat, 10 Apr 2021 at 22:48, gwes wrote:
>
>
>
> On 4/10/21 5:22 PM, Tom Smyth wrote:
> > Hello,
> >
>
Hello,
1) issue does not occur with fvwm or with chrome running in fvwm
so the issue seems to be confined to xfce, and I was running just 1
xfce terminal session
2) (so the issue is not related to chromium)
Thanks
On Fri, 9 Apr 2021 at 19:09, Tom Smyth wrote:
>
> just to update this
he Mellanox 655902-001 QSA adapter.
> >
> > Which is pretty much what we have in production. :)
> > Are you planning to buy new or eBay? There are some pretty good deals on
> eBay.
> >
> > Mischa
>
>
--
Kindest regards,
Tom Smyth.
Apr 2021 at 19:33, Tom Smyth wrote:
>
> Hello
>
> 6.9 Current amd64 xfce seems to freeze and not respond to mouse
> clicks or keystrokes. I cant seem to change windows or enter text on
> the X terminal
>
>
> im running OpenBSD on an Oracle Virtualbox VM
>
> h
Hello
6.9 Current amd64 xfce seems to freeze and not respond to mouse
clicks or keystrokes. I cant seem to change windows or enter text on
the X terminal
im running OpenBSD on an Oracle Virtualbox VM
however + does work and im able to restart the x
session using the console
rcctl
...
suggested current as the bug might already be fixed in current as
opposed to release ...
On Wed, 7 Apr 2021 at 11:56, Jonathan Gray wrote:
>
> On Wed, Apr 07, 2021 at 11:34:54AM +0100, Tom Smyth wrote:
> > Try Current and 6.8 and see if you get a different result in each..
> &
Try Current and 6.8 and see if you get a different result in each..
dmesgs are key for getting help on this type of query ...
On Wed, 7 Apr 2021 at 11:33, Tom Smyth wrote:
>
> Hi Michel,
> if you send the dmesg from OpenBSD when it is installed and Ubuntu
> it would hel
fferent here.
> >
> > >
> > > Any pointing to the right direction would be appreciated. (If this
> > problem
> > > relates to Xorg specifically and not to OpenBSD please let me know).
> > >
> > > [1] https://marc.info/?l=openbsd-bugs=161754767328009=2
> > >
> > > Regards,
> > >
> > > Michel
> > >
> >
--
Kindest regards,
Tom Smyth.
of other software that I use on top of OpenBSD
I couldn't agree more with you
Thanks again..
On Sun, 21 Feb 2021 at 18:42, Stuart Henderson wrote:
>
> On 2021-02-21, Tom Smyth wrote:
> > my thinking is by having the service off by default would reduce the
> > default attack
1 - 100 of 720 matches
Mail list logo
