Jurjen Oskam wrote:
At home, I have a wireless access point which is directly connected to rl1.
To eliminate the access point, I put a wireless PCI card in the machine,
and configured it for hostap mode.
A laptop running Linux is the wireless client. When the client associates
with the ral0
On 7/19/07, Jurjen Oskam [EMAIL PROTECTED] wrote:
On Wed, Jul 18, 2007 at 04:53:35PM +0300, Alexey Suslikov wrote:
Jurjen Oskam wrote:
At home, I have a wireless access point which is directly connected to rl1.
To eliminate the access point, I put a wireless PCI card in the machine
vilkai wrote:
same problem here :)
Steve Williams-2 wrote:
Hi,
I am trying to get squid working in transparent mode on a bridge. With
hints from previous emails on the list to use route-to, by all
appearances, the packets are getting redirected properly, they just
don't arrive
Hello [EMAIL PROTECTED]
spdmem0 at iic0 addr 0x52 DDR2 SDRAM non-parity PC25100CL5
CL5 is CAS latency I think, but what does PC25100 mean here? :)
Thanks.
Looks like PC- and PC2- will be a better form to display
to prevent a confusion.
- Alexey.
On 10/9/07, Jonathan Gray [EMAIL PROTECTED] wrote:
On Tue, Oct 09, 2007 at 12:26:28AM +0300, Alexey Suslikov wrote:
Hello [EMAIL PROTECTED]
spdmem0 at iic0 addr 0x52 DDR2 SDRAM non-parity
Hello [EMAIL PROTECTED]
As seen in http://wiki.x.org/wiki/IntelGraphicsDriver, xf86-video-i810
is no more and there is xf86-video-intel driver instead.
New driver supports more chipsets including i965 and i945 (aka
GMA 950 which is frequently used in laptops).
Is such i810 - intel update for
vcubus wrote:
Fugulta live-cd (OpenBSD 4.1)
# dmesg
Intel 82573E AMT rev 0x03 at pci4 dev 0 function 3 not configured
Intel 82573E KCS (Active Management) rev 0x03 at pci4 dev 0 function 4 not
configured
ichiic0 at pci0 dev 31 function 3 Intel 82801GB SMBus rev 0x01: irq 10
iic0 at ichiic0
Michael [EMAIL PROTECTED] wrote:
tun0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1500
groups: tun egress
inet 75.192.185.229 -- 66.174.20.4 netmask 0xff0
How about adjusting mtu on tun to take ppp encapsulation overhead
in account?
- Alexey.
Hello [EMAIL PROTECTED]
Is someone working on Waveplus 802.11b wireless chip?
http://www.waveplus.com/wp1200.asp
http://www.waveplus.com/download/wp1200_datasheet.pdf
Bye.
Hello [EMAIL PROTECTED]
Just FYI. TS-WIFIBOX Tiny WiFi Box Application Kit for $249.
* Internal TS-7400 SoM engine
* Ultra-Fast Bootup Firmware
* 200 MHz ARM9 processor with MMU
* Internal 802.11g WiFi with external antenna
* Industrial quality design
o Rugged aluminum enclosure
o No moving
Chris wrote:
I write once again for the same old things I was writing
at the opwnbsd 3.4. If you search the emails to the list are there.
Same old same old.
Please, clarify what are you talking about: userland pppoe (man 8
pppoe) or in-kernel one (man 4 pppoe)?
Hello [EMAIL PROTECTED]
Looks like FreeBSD is helping massively to make our world more BLOBby...
http://bsdblogs.droso.org/netchild/2006/10/19/native-realplayer-for-freebsd/
Bye.
[EMAIL PROTECTED] wrote:
I have a ppp(oe) problem under openbsd 4.2 (with 009_ppp.patch patch
applied).
You probably should try in-kernel pppoe instead of doing things in user-land.
See man 4 pppoe for details.
- Alexey.
[EMAIL PROTECTED] wrote:
Now I tested wuth very simply topology: just 2 pc's and switch
One OpenBSD another Linux with web server.
Now I have only one line in my pf.conf:
scrub all max-mss 1400 fragment reassemble
This one-liner will not work unless you have corresponding
pass rule in your
Hello [EMAIL PROTECTED]
Assume the following situation:
- no serial console,
- no dmesg buffer,
- kernel crashes while box in X.
Can savecore help? If so, how can I use it?
- Alexey.
Reyk Floeter wrote:
I just committed the 2nd version of the patch to -current but I still
need more test reports on devices that used to work.
- Please update to -current (for example ar5212.c 1.44) or use the patch
that I sent to this list if your AnonCVS is not updated yet.
- Test it on
Hello [EMAIL PROTECTED]
Can somebody recommend well-supported external (u)audio
card with (u)midi controller?
Thanks.
Alexey
Markus Bergkvist wrote:
2.00 GHz cpu with unknown speedstep is reported to have 2200 MHz as
highest speed. Feature or defect? :-) Does this deserve a PR posting or
is it ongoing work?
$ apm -L sysctl hw.cpuspeed
hw.cpuspeed=1200
$ apm -H sysctl hw.cpuspeed
hw.cpuspeed=2200
Have you
Hello [EMAIL PROTECTED]
January 7, 2007, Nokia launches Developer Device Program.
Nokia is launching a Developer Device Program to provide open source
developers with Nokia N800 Internet Tablets at a discount. Maemo.org
will be providing 500 devices at a price of 99 euros per device to
OpenBGPD/OpenBSD: Free OpenBSD-based EGP/IGP routing platform.
Solid, secure, free, and very scalable. Again, you're operating without
vendor support. Non-standard of BGP functionality (modeled after PF).
Awesome integration with CARP and PF, makes for great firewalls, routers
and route servers.
Ivan Arsenyev wrote:
Hi, @misc,
Please advice good PCMCIA Wi-Fi card (11g, 36 Mb/s and upper)
working nice both at x86 and macppc platforms.
Check out ral(4) and acx(4) man pages. Maybe bwi(4).
Alexey
Ivan Arsenyev wrote:
Check out ral(4) and acx(4) man pages. Maybe bwi(4).
It's better to know end user's point, to avoid different
bugs and problems. bwi(4) is badliest choice, as it's totally
based on reverse engineering.
If ever looked into sys/arch/macppc/conf/GENERIC you should
notice
Sven Wolf wrote:
I've successfully installed -current on a ASUS EEEPC 1000H (via an usb
stick).
At the moment lii doesn't detect the wired lan adapter: Attansic
Technology L1E rev 0xb0 but maybe there will be a patch in the future...
L1 is a gigabit chipset from Attansic. It is different
Vladimir Kirillov wrote:
On 19:25 Fri 10 Oct, Beavis wrote:
Vladimir,
Sorry to bother you but I tried to apply the patch on uvm_map.c
i copied the patch you gave me here and run
patch -p0 uvm_map.patch
I get some rej. files. any pointers or help will be greatly
Hello [EMAIL PROTECTED]
We have two important diffs to azalia(4) audio driver.
1. http://marc.info/?l=openbsd-techm=122365193510743w=2
(If you mixerctl output shows to many items, you definitely
should try this one and report to us).
2. http://marc.info/?l=openbsd-techm=122381492825141w=2
Stephane Lapie wrote:
Hello,
I am currently working with a Portwell NAR-5530 (network appliance
running off Intel hardware, can use regular HDs or CF cards as boot
device).
We want to use this at work for network appliances, but end up
bumping in the following problem : the kernel detects
On Wed, Oct 22, 2008 at 9:15 AM, Stephane Lapie [EMAIL PROTECTED] wrote:
On Oct 21, 2008, at 8:01 PM, Alexey Suslikov wrote:
Stephane Lapie wrote:
Hello,
I am currently working with a Portwell NAR-5530 (network appliance
running off Intel hardware, can use regular HDs or CF cards as boot
On Thu, Oct 23, 2008 at 4:08 AM, Stephane Lapie [EMAIL PROTECTED] wrote:
On Oct 22, 2008, at 4:49 PM, Alexey Suslikov wrote:
On Wed, Oct 22, 2008 at 9:15 AM, Stephane Lapie [EMAIL PROTECTED]
wrote:
On Oct 21, 2008, at 8:01 PM, Alexey Suslikov wrote:
Stephane Lapie wrote:
Hello,
I am
On Fri, Oct 24, 2008 at 10:57 AM, Aaron Stellman [EMAIL PROTECTED] wrote:
Hello misc@,
Compiled freshly checked out -current from 10/23/08 -- no sound.
Looked through mixerctl and audioctl outputs, didn't find anything
interesting.
Downgraded azalia_codec.c to 1.49
azalia.h to 1.15
Paul de Weerd wrote:
On Sun, Oct 26, 2008 at 12:01:40PM -0700, Chris Kuethe wrote:
| On Sun, Oct 26, 2008 at 11:41 AM, Matthew Weigel [EMAIL PROTECTED] wrote:
| Actually, (2^32)-1, or 4GB, is the max size per file
| (http://support.microsoft.com/kb/314463). I can see that being a problem
On Sun, Oct 26, 2008 at 10:11 PM, Jonathan Schleifer
[EMAIL PROTECTED] wrote:
Alexey Suslikov [EMAIL PROTECTED] wrote:
And there is the http://www.fs-driver.org/ - also free
and do read/write on ext2 for Windows.
Crashed my ext2 data partition more than once, but I could always
recover
On Sun, Oct 26, 2008 at 10:18 PM, Paul de Weerd [EMAIL PROTECTED] wrote:
On Sun, Oct 26, 2008 at 09:51:38PM +0200, Alexey Suslikov wrote:
| Paul de Weerd wrote:
|
| On Sun, Oct 26, 2008 at 12:01:40PM -0700, Chris Kuethe wrote:
| | On Sun, Oct 26, 2008 at 11:41 AM, Matthew Weigel [EMAIL
On Sun, Oct 26, 2008 at 10:22 PM, Jonathan Schleifer
[EMAIL PROTECTED] wrote:
Alexey Suslikov [EMAIL PROTECTED] wrote:
I crashed many FAT32 partitions. NTFS is kinda complex
to crash but, as discussed above, it is hard to access in
full-blown read/write mode from non-Windows.
Did you crash
On Mon, Oct 27, 2008 at 1:01 AM, J.C. Roberts [EMAIL PROTECTED] wrote:
On Sunday 26 October 2008, Paul de Weerd wrote:
On Sun, Oct 26, 2008 at 09:51:38PM +0200, Alexey Suslikov wrote:
| Paul de Weerd wrote:
| On Sun, Oct 26, 2008 at 12:01:40PM -0700, Chris Kuethe wrote:
| | On Sun, Oct 26
On Mon, Oct 27, 2008 at 2:25 AM, Neko [EMAIL PROTECTED] wrote:
im trying to report the issue of the ffs driver you sent me to its
developper, yes it can access disk labels.
yes it sees other disk labels,
but if you have /home on disk label d it wont work
my disklabel is kinda like so
bsd
On Sun, Oct 26, 2008 at 11:21 PM, dermiste [EMAIL PROTECTED] wrote:
On Sun, Oct 26, 2008 at 9:23 PM, Alexey Suslikov
[EMAIL PROTECTED] wrote:
On Sun, Oct 26, 2008 at 10:18 PM, Paul de Weerd [EMAIL PROTECTED] wrote:
On Sun, Oct 26, 2008 at 09:51:38PM +0200, Alexey Suslikov wrote:
| Paul de
Han Boetes wrote:
Gilles Chehade wrote:
[snip]
...and in OpenBSD land you better have a GOOD reason to have an
uptime longer than two releases.
[snip]
Gilles,
proud to never exceed 200 days of uptime
Speaking of which... I think I have a pretty good reason to bring
down my uptime
Jacob Meuser wrote:
I saw the suggestion to read tech@ in another thread but saw no (recent)
diffs there that I believe apply to this machine.
one thing I'm trying to do is get rid of the static mixer definitions
in azalia_codec.c. this exposes all the controls instead of a limited
Jacob Meuser wrote:
On Sun, Dec 14, 2008 at 06:09:24PM +0100, Martin Toft wrote:
A small follow-up:
The problem only occurs when opening the audio device. If I queue a
number of tracks in mpd's playlist and let it play, then it does not
suddenly start making noise from one track to the next.
Michael Warmuth wrote:
Hello,
since beginning of December, wpi stopped working with -current on my
system.
It seems to get detected correctly (see attached dmesg) but when running
ifconfig I get on stderr:
ifconfig: SIOCGIFNETMASK: Device not configured
ifconfig: SIOCGIFNETMASK_IN6:
How about resurrecting this diff?
http://thread.gmane.org/gmane.os.openbsd.ports/39927
On Thu, Oct 20, 2011 at 15:58, Martin Pelikan martin.peli...@gmail.com wrote:
2011/10/20 Alexey E. Suslikov alexey.susli...@gmail.com:
Vadim Zhukov persgray at gmail.com writes:
Another one
http://thread.gmane.org/gmane.os.openbsd.misc/180057/focus=180749
On Thu, Oct 20, 2011 at 21:32, Alexey Suslikov
alexey.susli...@gmail.com wrote:
How about resurrecting this diff?
http://thread.gmane.org/gmane.os.openbsd.ports/39927
On Thu, Oct 20, 2011 at 15:58, Martin Pelikan
Hello.
Does anybody know about iSCSI BIOS settings in recent Supermicro boards?
For example, manual for X8SIL family says:
1-7 iSCSI Support
The X8SIL/X8SIL-F/X8SIL-V motherboard supports the iSCSI Internet
Protocol. iSCSI
is an IP networking standard used to link and manage data storage, and
http://www.origenboard.org/index.php?document_srl=130
Ariane van der Steldt wrote:
On Tue, May 31, 2011 at 03:28:11PM -0500, Amit Kulkarni wrote:
basically rewriting the memory
management part of the OS in your browser.
Do some browsers do this on OpenBSD?
Googles v8 javascript engine has Pages, Spaces, Heaps and Pagination
logic.
Marc Espie wrote:
On Mon, Aug 29, 2011 at 01:13:14PM +0400, Vadim Zhukov wrote:
On Sunday 28 August 2011 19:50:51 Marc Espie wrote:
On Sun, Aug 28, 2011 at 05:00:46PM +0200, Tomas Bodzar wrote:
(and main link which caused that
Ted Unangst wrote:
Ted, Is it worth looking at the current system to see if the suck factor
can be vacuumed from it, or is it a hopeless case in your opinion?
It is hard to imagine a bug tracker that could actually suck more than
gnats. The current replacement, email bugs@ and search the
Hello m...@.
I'm complete out of insights with my Eaton NV 2000 which is supported
(http://www.networkupstools.org/compat/stable.html) by megatec_usb
driver.
$ dmesg | egrep -i generic|ugen
OpenBSD 4.7-beta (GENERIC.MP) #82: Fri Feb 5 01:05:44 MST 2010
...@gmail.com wrote:
Alexey Suslikov wrote (06/15/10 18:49):
I'm complete out of insights with my Eaton NV 2000 which is supported
(http://www.networkupstools.org/compat/stable.html) by megatec_usb
driver.
I don't know if this will be helpful, but this works for me:
$ cat /etc/nut/ups.conf | grep -v
Jacob Meuser wrote:
On Sun, Dec 26, 2010 at 12:46:14PM +0100, ??? ??? wrote:
On Tue, Dec 14, 2010 at 4:55 PM, Jacob Meuser jake...@sdf.lonestar.org
wrote:
On Tue, Dec 14, 2010 at 03:39:23PM +0100, Dmitrij D. Czarkoff wrote:
I have found my external microphone (mic2) not working
Claudio Jeker wrote:
On Wed, Mar 02, 2011 at 08:34:02PM +0100, Manuel Guesdon wrote:
On Wed, 2 Mar 2011 21:52:03 +0900
Ryan McBride mcbr...@openbsd.org wrote:
| On Mon, Feb 28, 2011 at 12:49:01PM +0100, Manuel Guesdon wrote:
| OK. Anyway NIC buffers restrict buffered packets number.
RLW wrote:
W dniu 2011-03-05 21:24, Manuel Guesdon pisze:
On Sat, 5 Mar 2011 22:09:51 +0900
Ryan McBridemcbr...@openbsd.org wrote:
| On Fri, Feb 25, 2011 at 08:40:10PM +0100, Manuel Guesdon wrote:
| systat -s 2 vmstat:
|
| 3.2%Int 0.1%Sys 0.0%Usr 0.0%Nic 96.8%Idle
|
Hello.
I have found interesting articles (opinions) about hardware
support in Linux. Just FYI and interesting to read (learn).
Linux Doesn't Lack Drivers, it Lacks Complete Drivers.
http://www.apreche.net/2007/10/27/linux-doesnt-lack-drivers-it-lacks-complete-drivers/
This is a list of hardware
giovanni wrote:
while I'm trying to better understand what happens I'm curious if
anybody out there is having troubles w/ recent added acpi global lock
or it's just me
uvm_fault(..., 0x0, 0, 1) - e
kernel: page fault trap, code=0
stopped at acpi_acquire_glob_lock+0x4 movl 0(%ecx),%eax
[EMAIL PROTECTED] wrote:
acpi at mainbus0 not configured
Have you tried to enable acpi? GENERIC.MP with acpi?
- Alexey.
Andreas Maus wrote:
Did anyone try to run OpenBSD on Asus new small eeePC?
Output of /proc/cpuinfo (1) and lspci (2) can be found here:
(1) http://scr3.golem.de/?d=0711/Eee-Testa=55901s=9
(2) http://scr3.golem.de/?d=0711/Eee-Testa=55901s=10
4 GB Flashdrive and 512MB+ RAM is enough and the
Full dmesg and lspci
http://www.fabianrodriguez.com/blog/archives/2007/10/26/ubuntu-710-gibbon-swings-on-the-asus-eee/
- Alexey.
On Nov 14, 2007 1:02 AM, Alexey Suslikov [EMAIL PROTECTED] wrote:
Andreas Maus wrote:
Did anyone try to run OpenBSD on Asus new small eeePC?
Output of /proc
:
0cf2:6225 ENE Technology, Inc. is probably an SD controller
and
eb1a:2761 eMPIA Technology, Inc. is probably a web-camera.
- Alexey.
On Nov 14, 2007 1:29 AM, Alexey Suslikov [EMAIL PROTECTED] wrote:
Full dmesg and lspci
http://www.fabianrodriguez.com/blog/archives/2007/10/26/ubuntu-710-gibbon
Maybe different Eee-PC models?
If I understand correctly, AR5007 solution is based on AR2417 chip. AR5006 is
based on AR5424. And this is mini-PCI so ASUS can plug anything...
- Alexey.
On Nov 14, 2007 1:45 AM, Stuart Henderson [EMAIL PROTECTED] wrote:
On 2007/11/14 01:02, Alexey Suslikov
On Nov 14, 2007 10:32 AM, Andreas Maus [EMAIL PROTECTED] wrote:
On Wed, Nov 14, 2007 at 01:02:55AM +0200, Alexey Suslikov wrote:
Hi Alexey.
Looks like WLAN is Atheros 5212 which is ath(4) under OpenBSD.
See here http://forums.bsdnexus.com/viewtopic.php?pid=16360#p16360
About LAN. I
Hello [EMAIL PROTECTED]
FYI.
Abstract
As CPU cores become both faster and more numerous, the limiting factor for
most programs is now, and will be for some time, memory access. Hardware
designers have come up with ever more sophisticated memory handling and
acceleration techniquessuch as CPU
Johan Mson Lindman wrote:
http://people.redhat.com/drepper/cpumemory.pdf
- Alexey.
Is this paper from the same Drepper as is posting in the URL below?
http://sources.redhat.com/ml/libc-alpha/2000-08/msg00053.html
Yes. But it's up to you - to leave yourself in 2000.
- Alexey.
Predrag Punosevac wrote:
I apologize to everyone for my first message as it seems stirred high
unintended emotions. I was merely interested in the technical
possibility to run the Skype on the OpenBSD box. As of this moment
I do not have even a Linux emulator turned on as I have strong
Richard Stallman wrote:
Torvalds' version of Linux is not free software, for this reason.
Ututo and gNewSense include a version of Linux which remove the
firmware blobs, in order to make it free software.
that's awesome, can users add these back in if they choose?
I suppose
df wrote:
Sorry for top posting...and the intrusion...
Just wondering if you solved this problem?
Noticed that acx0 had an MSDU (MAC Service Data Unit) life timeout
- I know you said you loaded the firmware...was it the latest? 13 Oct 07
acx-firmware-1.4.tgz
- What are the specifics of
Hello [EMAIL PROTECTED]
We're using relayd for proxying radio streams in our company (via relay
rules). Recently, we've decided to put these streams into a queue on the
upstream router/shaper but we need to mark them by specific TOS (like
we do for http proxy traffic going from squid).
Although
carlopmart wrote:
block in quick on egress inet proto tcp from any to any flags /S label
Traffic \
Denied block in quick on egress inet proto tcp from any to any flags /SFRA
label \
Traffic Denied block in quick on egress inet proto tcp from any to any
flags /SFRAU \
label Traffic
BOG BOG wrote:
Hello everybody,
yes Sam, you are right, but this bios is a little bit different, there is
only a \
setting regarding SATA: SATA0 legacy. with this option enabled, the kernel
detects \
the hard drive, but is not able to initialize it in order to be partitioned .
So i \
BOG BOG wrote:
I have followed your suggestions regarding -current.
amd64 -current (GENERIC.MP) does no longer hangs when trying to detach re0,
but now, \
re0 is sometimes detected correctly and sometimes not:
no. main controller itself works in both shown cases.
there is something wrong
larsnoo...@openoffice.org wrote:
Based on what I've seen from other peoples ongoing attempts at using
virtualization from the company you mentioned, it's not going to lead to
anything of practical value.
What exactly wrong with Microsoft's (oh, gosh, I said that) virtualization
technologies?
irix wrote:
Hello Misc,
When the final port altq in pf? And then in 2002 and stretches porting CDNR,
the \
kernel ported in pf no.
Here is an excerpt from the log of 16.12.2002 about altq
Log message:
switchover to pf-based altq.
- remove files which are no longer used, or we don't
Daniel A. Ramaley wrote:
On 2009-03-10 at 14:34:30, you wrote:
I want to set up the web server to share file, but i know apache-1.3.x
(which is openbsd default httpd) had the 4G file size limit, can i
break this limit?
I don't know the correct answer to this question, but i thought of a
On Wed, Mar 11, 2009 at 17:56, Ted Unangst ted.unan...@gmail.com wrote:
On Wed, Mar 11, 2009 at 11:37 AM, Alexey Suslikov
alexey.susli...@gmail.com wrote:
The limitation is 2Gb on 32-bit platforms because of off_t (man lseek).
off_t is always 64-bit.
Stock ftpd also has mentioned limitation
On Wed, Mar 11, 2009 at 19:11, Ted Unangst ted.unan...@gmail.com wrote:
On Wed, Mar 11, 2009 at 12:01 PM, Alexey Suslikov
alexey.susli...@gmail.com wrote:
On Wed, Mar 11, 2009 at 17:56, Ted Unangst ted.unan...@gmail.com wrote:
If using a 64-bit machine fixes it, then the type in question
Remember SOPA/ACTA? If somebody is planning to have a regulation,
this somebody should take care about tools which guarantee direct, not
circumstantial, evidence of somebody else broke this regulation.
UEFI implements network stack so it can be a long-standing strategy.
UEFI is about remote
On Mon, Jul 9, 2012 at 5:03 AM, Nico Kadel-Garcia nka...@gmail.com wrote:
Many of us can comfortably disable UEFI, but it's going to be
problematic for our less skilled colleagues.
Well, are you sure UEFI disable button will turn off ALL of UEFI functions?
Also, UEFI will possibly take down a
Hello misc.
http://klang.eudyptula.org/
Just curious, why they didn't even try to evaluate OpenBSD sndio.
An overall approach to the problem is interesting thing too
Q: Why a audio system in the kernel?
A: Because it's the only reasonable thing to do.
What people think? Maybe we should write
On Thu, Mar 14, 2013 at 9:12 PM, Stefan Sperling s...@openbsd.org wrote:
On Thu, Mar 14, 2013 at 06:51:54PM +, Alexey E. Suslikov wrote:
John Tate john at johntate.org writes:
I've been trying to get PHP to be able to email from a chrooted apache
server. Running without chroot is not
On Thu, Mar 14, 2013 at 9:35 PM, John Tate j...@johntate.org wrote:
From the end of error_log:
femail: no recipients
femail commandline switches aren't 100% sendmail-
compatible.
check php.ini on how you pass recipients to femail.
search over misc@ archives
On Fri, May 17, 2013 at 7:24 PM, Dārayavahush Khola da.kh...@gmail.com wrote:
There is just now way. How did you know That is exactly what I was
talking about. I even have it bookmarked for when I get some hardware
together Amazing Alexy Ok The man
On Wed, Nov 13, 2013 at 2:30 PM, Claudio claudiozu...@gmail.com wrote:
On Wed, Nov 13, 2013 at 12:12:47PM +, Alexey E. Suslikov wrote:
Tomas Bodzar tomas.bodzar at gmail.com writes:
Right, my fault. Missed complete path in output. Those are for Haswell
Looking at mentioned commits, at
On Wed, Nov 13, 2013 at 3:18 PM, Claudio claudiozu...@gmail.com wrote:
On Wed, Nov 13, 2013 at 03:06:08PM +0200, Alexey Suslikov wrote:
On Wed, Nov 13, 2013 at 2:30 PM, Claudio claudiozu...@gmail.com wrote:
On Wed, Nov 13, 2013 at 12:12:47PM +, Alexey E. Suslikov wrote:
Tomas Bodzar
On Wed, Nov 13, 2013 at 4:18 PM, Claudio claudiozu...@gmail.com wrote:
After updating the bios and setting setperf I can no longer reproduce the
issue :), I'll try enabling apmd again later and check how it runs.
(On an unrelated note Firefox uses incredibly high amounts of cpu compared to
On Wed, Nov 13, 2013 at 4:54 PM, Tomas Bodzar tomas.bod...@gmail.com wrote:
Yeah, however Firefox is running pretty badly after introduction of KMS on
my Dell E6320 (tried like 3 weeks ago or so), Chromium was simply just
crashing all the time.
could you provide dmesg with most recent
On Sat, Nov 16, 2013 at 5:03 PM, Claudio claudiozu...@gmail.com wrote:
Unfortunately today I was able to reproduce the issue by simply going to
youtube with chromium and browsing around (not even reproducing any video)
To find exact problematic code path, have you considered using
google
On Tue, Dec 24, 2013 at 12:16 AM, Chris Smith obsd_m...@chrissmith.org wrote:
On Mon, Dec 23, 2013 at 5:10 PM, Alexey E. Suslikov
alexey.susli...@gmail.com wrote:
blind guess - you have kernel and userland out of sync.
Not so.
It doesn't matter how so: ABI is either in sync, or it is out of
On Tue, Dec 24, 2013 at 12:26 AM, Jérémie Courrèges-Anglas
j...@wxcvbn.org wrote:
Alexey Suslikov alexey.susli...@gmail.com writes:
On Tue, Dec 24, 2013 at 12:16 AM, Chris Smith obsd_m...@chrissmith.org
wrote:
On Mon, Dec 23, 2013 at 5:10 PM, Alexey E. Suslikov
alexey.susli...@gmail.com
Sebastian Reitenbach sebastia at l00-bugdead-prods.de writes:
Anyways, at work I specify the nwid and the wpakey like this:
ifconfig urtw0 nwid MYID wpakey SECRETKEY up
but status keeps telling me: no network
however, the manual page tells me that WPA and WPA2 should work.
from
Brian Curran brian at brianpcurran.com writes:
Hello,
I have an Alfa AWUS036H USB wi-fi adapter that I am using on OpenBSD
5.4 amd64. Problem is, sometimes as often as every 15 minutes, the only way
to
get the interface to pass traffic is with 'ifconfig urtw0 down
ifconfig urtw0 up'.
Brian Curran brian at brianpcurran.com writes:
when it stops passing traffic, does issuing ifconfig urtw0 scan help?
I test this just now and it seemed to help, although I only started
seeing ping replies about 10 seconds after issuing the scan. There is
a similar small delay, though
Leonardo Santagostini lsantagostini at gmail.com writes:
pci1 at ppb0 bus 1
Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not
configured
I have
pci3 at ppb2 bus 3 Attansic Technology AR8172 rev 0x10 at pci3 dev 0
function 0 not configured
More info about supporting these
Atanas Vladimirov vlado at bsdbg.net writes:
nvt0 shows wrong values for fan speed and voltage.
In BIOS values are correct. The motherboard is Supermicro X8STE (dmesg
at the end).
Is this a known behavior of nvt sensor/driver?
P.S.: lm1 sensor also shows wrong/different values.
Christian Weisgerber naddy at mips.inka.de writes:
I'm interested in what values people have in their /var/db/ntpd.drift
files.
cpu0: Intel(R) Pentium(R) CPU 2117U @ 1.80GHz, 1796.23 MHz
5.323365e-06
cpu0: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2394.38 MHz
1.213260e-05
if it is important, how
Atanas Vladimirov vlado at bsdbg.net writes:
https://www.marc.info/?t=14148214521r=1w=2
Earlier statement still applies: unified diff against -current
to tech@ with cc to usual networking suspects.
On Mon, Mar 30, 2015 at 9:28 PM, Atanas Vladimirov vl...@bsdbg.net wrote:
On 30.03.2015 21:08, Alexey Suslikov wrote:
Atanas Vladimirov vlado at bsdbg.net writes:
https://www.marc.info/?t=14148214521r=1w=2
Earlier statement still applies: unified diff against -current
to tech@ with cc
Joel Rees joel.rees at gmail.com writes:
When I touch the trackpad while running xfce4, the console and the
dmesg fill up with
pms0: not in sync yet, discard input (state n)
It isn't strictly related to X11 and should now be fixed in -current.
Check out recent snapshot.
Joel Rees joel.rees at gmail.com writes:
Care to point me in a general direction in the source tree? ports or
src, for instance?
Well, I was hacking around src/sys/dev/pci/if_ral_pci.c and
friends.
At first, RT3290 needs different firmware (I do believe I used
Debian package to extract
Joel Rees joel.rees at gmail.com writes:
From my dmesg:
Ralink RT3290 rev 0x00 at pci2 dev 0 function 0 not configured
Ralink Bluetooth rev 0x00 at pci2 dev 0 function 1 not configured
RT3290 isn't supported.
But you can play with
Frederic URBAN frederic.urban at ircad.fr writes:
We have some ACPI problems with various IBM server X. Since it's a very
early panic when kernel boot there is now access to ddb to print the
trace. You are prompted to press any key to reboot :) It has been
verified on IBM Server x3650 M1,
Atanas Vladimirov bsdbg.net> writes:
> I observe strange behavior with Supermicro X8SIL-F. Latest BIOS and IPMI
> firmware.
> Only one FAN is present (CPU FAN).
> After some time of normal work IPMI start to report errors with one (or
> more) fans (low speed or not present).
> 'systat sensors'
1 - 100 of 113 matches
Mail list logo
