Content Library Explorer is what I have used, seems to work well.
Mike
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Sherry Kissinger
Sent: Thursday, February 26, 2015 8:21 AM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] SCCM 2012R2 CU3 - Monitor
I have an application that will not appear in the list of available
applications when I add a "install application" step to my TS. I deleted the
application completely, built a new one and redistributed it, verified content,
etc. It still will not show. What might cause this:?
Best Regards,
M
NM, I think I figured it out. /facepalm
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Murray, Mike
Sent: Thursday, February 26, 2015 1:27 PM
To: mssms@lists.myitforum.com
Subject: [mssms] Application not available in task sequence
I have an
S.
Also (not sure on this one, though), if all of the deployment types have the
Logon Requirement set to "Only when a user is logged on" that could also block
it.
Kenneth Merenda
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists
You could try
wmic computersystem get model
Mike
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Chris Carbone
Sent: Wednesday, March 4, 2015 9:49 AM
To: mssms@lists.myitforum.com
Subject: [mssms] Get product name is blank
When I use the command below
om] On Behalf Of Murray, Mike
Sent: Wednesday, March 04, 2015 12:59 PM
To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com>
Subject: [mssms] RE: Get product name is blank
You could try
wmic computersystem get model
Mike
From: listsad...@lists.myitforum.com<mailto:lists
pport and there are probably more
I pity you :)
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Mittwoch, 4. März 2015 19:10
To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com>
oly sh.. that’s a lot of models to support and there are probably more
I pity you ☺
From:
listsad...@lists.myitforum.com
[mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Mittwoch, 4. März 2015 19:10
To:
mssms@lists.myitforum.com
Subject: [mssms] RE: Get product name is
what that usually is
called…
-Roland
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Mittwoch, 4. März 2015 23:18
To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com>
Subject
Congrats!
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Lutz, Ken
Sent: Friday, March 20, 2015 4:01 PM
To: SMS List
Subject: [mssms] My turn to retire
I am both pleased and saddened to announce that I will no longer be monitoring
this list. I must sa
You may need network drivers added to the boot image, or maybe check the
date/time in BIOS.
Mike
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Marilyn Muhammad-Lawal
Sent: Friday, March 20, 2015 12:35 PM
To: mssms@lists.myitforum.com
Subject: [mssms]
I'm trying to use this to create a report. When I run the report, I get:
* An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
Here's the SQL:
select distinct
SMS_R_System.ItemKey,SMS_G_System_PC_B
yitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Tuesday, March 24, 2015 11:23 AM
To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com>
Subject: [mssms] Help with SQL for report
I'm trying to
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Tuesday, March 24, 2015 3:25 PM
To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com>
Subject: [mssms] RE: Help with SQL for report
Hi G
om on behalf
of Murray, Mike
Sent: Tuesday, March 24, 2015 1:15 PM
To: mssms@lists.myitforum.com
Subject: [mssms] RE: Help with SQL for report
It appears removing RV.Description0 fixed the problem. Is there another way to
grab that field?
From: listsad...@lists.myitforum.com [mailto:l
Good morning,
Could some help me add the following to this query I am using to pull EP
data into Excel?
Client:
Last Active Time
Last Policy Request
Last Software Scan
Last Hardware Scan
User:
User
Top Console User
Existing Query:
SELECT v_R_System.Name0 as 'Co
stsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: 9. maj 2016 19:57
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com>
Subject: [mssms] SQL query help?
Good morning,
Could som
:bump:
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Monday, May 9, 2016 10:57 AM
To: mssms@lists.myitforum.com
Subject: [mssms] SQL query help?
Good morning,
Could some help me add the following to this query I am using to
serRankingPerComputer =1
On Wed, May 11, 2016 at 11:14 AM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
:bump:
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com
<mailto:listsad...@lists.myitforum.co
What does smsts.log say?
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Stewart, Michael
Sent: Tuesday, May 24, 2016 12:47 PM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] Windows 10 OSD Help
No ccmsetup.log I can find anywhere. Client version
We use it quite a bit. We customized the appearance to match our org colors,
too. If you have apps that require special licensing, you can require
approval on those, which is nice.
Mike
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of henry.wil...
There are reports under "Software - Companies and Products" that should
handle what you need.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Garth Jones
Sent: Wednesday, June 1, 2016 1:45 PM
To: mssms@lists.myitforum.com
Subject: [mssms] RE: Query Help
Maybe something like the query here?
https://social.technet.microsoft.com/Forums/en-US/0f1ef5a9-7b83-49cf-b47b-90da8d535e85/need-a-sccm-sql-query-report-for-installed-software-with-packages-and-applications?forum=configmanagergeneral
SELECT v_GS_COMPUTER_SYSTEM.Name0 as 'Computer Name',
Hey folks,
I'm trying to inventory network printers on computers. I followed the
instructions here:
https://gallery.technet.microsoft.com/SCCM-2012-NETWORK-PRINTER-776b59b4
When I tested the script to add the registry keys from the computer, it
added it under HKLM\Software, but when I built
com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Tuesday, June 07, 2016 8:22 AM
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com>
Subject: [mssms] Network printer inventory question - PowerShell content
Hey folks,
I'm trying to inventory ne
I'm still trying to inventory network printers on computers. The script
below is a combination of the two scripts mentioned here:
https://gallery.technet.microsoft.com/SCCM-2012-NETWORK-PRINTER-776b59b4
I deploy it as a package that runs only when a user is logged on. It runs,
but only does the
] More PowerShell help, please
run it as a DCM rule as user with admin permissions.
On Wed, Jun 8, 2016 at 1:30 PM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
I’m still trying to inventory network printers on computers. The script below
is a combination of the two scripts men
g to say.
Just like has to be done if you were using this old way, using old and boring
vbscripts instead of cool new POSH scripts:
http://www.mnscug.org/blogs/sherry-kissinger/316-configmgr-inventory-per-user-network-printer-mapped-information-datashift-replacement
On Wed, Jun 8,
On Wed, Jun 8, 2016 at 1:30 PM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
I’m still trying to inventory network printers on computers. The script below
is a combination of the two scripts mentioned here:
https://gallery.technet.microsoft.com/SCCM-2012-NETWORK-PRINTER-776b59b4
Sherry, that did the trick. Thanks much!
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Murray, Mike
Sent: Wednesday, June 8, 2016 2:33 PM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] More PowerShell help, please
Sounds good, I’ll give it a
Hey folks,
I have the script below that adds the *computer* account to a security group
via "CSCRIPT.EXE AddGroup.vbs "Group Name". Could someone help me modify it
to add a user to the same group? The user would be a task sequence variable
(OSDUser or whatever). Thanks in advance!
Const ADS
:bump:
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Thursday, June 16, 2016 4:26 PM
To: mssms@lists.myitforum.com
Subject: [mssms] VB Script to add user to security group during imaging?
Hey folks,
I have the script below
listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Monday, June 20, 2016 10:54 AM
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com>
Subject: [mssms] RE: VB Script to add user to s
1 -Adgroup
%TSVar% -userName %TSVar2%
Thanks,
Jeff Jerousek <mailto:jeff.jerou...@lrs.com>
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Monday, June 20, 2016 11:44 AM
To: ms
CCM user at the start of the task sequence and remove it at the
end.
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Tuesday, June 21, 2016 12:43 PM
To: mssms@lists.myitforum.com <mailto:m
um.com
Subject: Re: [mssms] RE: VB Script to add user to security group during imaging?
The original script doesn't use the AD cmdlets so it should work in WinPE.
On Tue, Jun 21, 2016, 5:21 PM Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
This doesn’t seem to be working via the
um.com < <mailto:listsad...@lists.myitforum.com>
listsad...@lists.myitforum.com> on behalf of Murray, Mike <
<mailto:mmur...@csuchico.edu> mmur...@csuchico.edu>
Sent: Wednesday, June 22, 2016 9:38:50 AM
To: <mailto:mssms@lists.myitforum.com> mssms@lists.myitforum.com
Subje
When we image Windows 10 clients, we do not specify a product key. We have
AD configured for KMS activation, yet our clients are showing as MAK. Any
ideas?
Best Regards,
Mike Murray
Desktop Management Coordinator - IT Support Services
California State University, Chico
530.898.43
ain. If you don't
specify a KMS server to use, then Windows is going to look for one in DNS.
https://technet.microsoft.com/en-us/library/ff793405.aspx
From: <mailto:listsad...@lists.myitforum.com>
listsad...@lists.myitforum.com [ <mailto:listsad...@lists.myitforum.com>
I'm sure someone has something prettier, but this one works for me. I limit
the collection to All Servers (including the query for that below as well).
select SMS_R_System.Name from SMS_R_System inner join
SMS_G_System_INSTALLED_SOFTWARE on
SMS_G_System_INSTALLED_SOFTWARE.ResourceID = SMS_R_Sy
We’ve always used IP ranges, maybe this was why. I don’t recall.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Adam Juelich
Sent: Wednesday, July 13, 2016 1:21 PM
To: mssms@lists.myitforum.com
Subject: Re: [mssms] Site Assignment Issues
I thought
Absolutely. We’re all virtual. Just make sure your storage array has fast
disks. We moved to SSD storage, and things run great.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Burke, John
Sent: Tuesday, July 19, 2016 10:13 AM
To: mssms@lists.myitforum
LOL, me too. We only put the SQL volume on SSD, the others run on regular fast
disks. So they’re at least happy our entire environment isn’t using SSD’s.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Todd Hemsell
Sent: Tuesday, July 19, 2016 1:13 PM
Here's some basic stuff to get you started. You could read the logged in
user and search their AD user record:
Import-Module ActiveDirectory
Get-ADUser -Identity $env:USERNAME -Properties * | Select-Object
-ExpandProperty TelephoneNumber | Out-File C:\Scripts\Config.txt
This writes the p
e
$text | Out-File C:\Scripts\test.txt
The "`r`n" is a CR-LF.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Tuesday, July 26, 2016 4:03 PM
To: mssms@lists.myitforum.com
Subject: [mssms] RE: Scripting - Pwr Shell
+1. If the computer managed to get far enough along to get a record in the
console, you should delete that.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Adam Juelich
Sent: Wednesday, July 27, 2016 5:42 AM
To: mssms@lists.myitforum.com
Subject: Re:
By that, I mean the actual name of the computer. J
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Murray, Mike
Sent: Wednesday, July 27, 2016 7:13 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] There are no task sequences available
+1. If
dy
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Wednesday, 27 July 2016 9:56 AM
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com>
Subject: [mssms] RE: Scripting - Pwr Shell
We've already deployed this update, now I'd like to remove it. Would there
be any issue just deploying one removal batch file to all workstations
(rather than trying to identify which workstations have each one)?
BAT:
@echo off
wusa /uninstall /kb:3172985 /quiet /norestart
wusa /uninsta
rceid in (
Select MachineID from SMS_UpdateComplianceStatus
Where CI_ID=16783193 and Status=3
)
On Wed, Aug 3, 2016 at 11:29 AM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
We’ve already deployed this update, now I’d like to remove it. Would there be
any issue just deployin
tected.
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
] On Behalf Of Murray, Mike
Sent: Wednesday, August 03, 2016 11:29 AM
To: mssms@lists.myitforum.com <mailto:mssm
applicability.
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Wednesday, August 03, 2016 12:44 PM
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com>
Subject: RE:
I've been told "get used to it" on the patch management list. Not good
enough. I think this is ridiculous.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Roland Janus
Sent: Monday, August 15, 2016 4:08 PM
To: mssms@lists.myitforum.com
Subject: AW: [mss
If you do end up considering 1E Nomad, it worked great for us when we had
some slow connections.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Burke, John
Sent: Thursday, August 25, 2016 7:34 AM
To: mssms@lists.myitforum.com
Subject: [mssms] Current
Howdy,
I'm finding if I try to just use the TPM section of hardware inventory, it's
not reporting all of the TPM-capable systems (I'm assuming it only reports
systems that have TPM on?). What hardware inventory value would you look for
in a query? I suppose I could look under DCIM BIOS Enumera
fault.
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Thursday, August 25, 2016 5:30 PM
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com>
Subject: [mssms] Qu
capable systems
Win32_TPM is where my data is.
On Fri, Aug 26, 2016 at 11:29 AM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
Which one?
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com <
Hey folks,
Yesterday I ran a few recovery keys through the MBAM console with no
results. I tried the same ones in AD, they showed up. Later I tried another
one via AD, no result. It showed in the console, though. Weird? Anyone know
why this would be?
Best Regards,
Mike Murray
Deskto
Directory Domain
Services
-Phil
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Wednesday, September 7, 2016 11:55 AM
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com&
Although we do have a similar setting under Windows
Components\BitLocker.\Operating System Drives - Choose how
BitLocker-protected operating systems drives can be recovered
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Wednesday
I'm trying to retrieve the ManagedBy field with Get-ADComputer, but it comes
out as "CN=Last\, First,CN=Users,DC=csuchico,DC=edu". In the below script is
there a way to take that result and find the SamAccountName instead? Maybe
by looping through using Get-ADUser?
$ou = 'DC=csuchico,DC=edu'
.
select Name, @{Name="SAMAccName";Expression={(get-aduser
$_.managedby).SamAccountName}}
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Wednesday, 14 September 2016 6
Hello,
I am using the following query to get a list of all computers models in our
DB plus the count of each. But this report returns more values than should
exist. Example, it says we have 450 of Dell X, but through other reports
I count far less. Ideas?
SELECT
Manufactur
report?
How many more does it see?
This query look right, you should only see a few extra at best, due to dupe and
deleted pcs.
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Sep
We're playing with the 1607 build of Win10. The "suggested apps" and sneaky
"paid" apps are annoying. Anyone have some PowerShell to disable/remove
these during imaging?
Best Regards,
Mike Murray
Desktop Engineer/IT Consultant - IT Support Services
California State University
NM, found the group policy setting. J
From: Murray, Mike
Sent: Friday, September 23, 2016 9:41 AM
To: mssms@lists.myitforum.com
Subject: Removing suggested and various "paid" apps from Win10 during
imaging
We're playing with the 1607 build of Win10. The "suggested ap
Well, never mind again. I set the "turn off Microsoft consumer experiences"
in group policy, but I still see the suggested apps. Any ideas?
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Friday, September 23, 2016 9:56 AM
Sheesh, NM again. I had already logged in before I made the GPO change.
Sorry for the clutter. L
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Friday, September 23, 2016 10:56 AM
To: mssms@lists.myitforum.com
Subject: [mssms] RE
>From Mr. Niehaus:
https://blogs.technet.microsoft.com/mniehaus/2015/12/31/updated-remove-apps-script-and-a-workaround/
On Fri, Sep 23, 2016 at 12:56 PM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
Well, never mind again. I set the “turn off Microsoft consumer experiences” in
group policy, but
MMS is excellent. I went last year and plan on attending next year as well.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of rodtr...@myitforum.com
Sent: Tuesday, September 27, 2016 11:31 AM
To: SMS
Subject: RE: [mssms] Horrible food at Ignite
If y
I’m so over Vegas. I’d much rather go to SF, SD, or even Minnesota. :D
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Marcum, John
Sent: Tuesday, September 27, 2016 11:35 AM
To: SMS
Subject: RE: [mssms] Horrible food at Ignite
Ah man! No more Ve
If it’s in SF, I might even be able to attend. I’m not allowed to go to
anything out of state. L
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Tuesday, September 27, 2016 2:10
CM2012. I'd like to allow certain staff members to add computers to a
collection. I found this article:
https://social.technet.microsoft.com/Forums/en-US/c9d7531c-c8e1-4b0f-ab95-5a9ec5207e41/sccm-2012-security-to-allow-users-to-add-resource-to-a-collection?forum=configmanagersecurity
It says the
ilize Role-Based Administration on a Security Group / Collection
level?
On Thu, Oct 6, 2016 at 12:23 PM, Murray, Mike
mailto:mmur...@csuchico.edu>> wrote:
CM2012. I’d like to allow certain staff members to add computers to a
collection. I found this article:
https://social.technet.microsoft
ursday, October 6, 2016 12:56 PM
To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com>
Subject: Re: [mssms] Allowing staff to add computers to collection
[External Email]
Can't you utilize Role-Based Administration on a Security Group / Collection
level?
On Thu, Oct 6, 2016 at
s.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Thursday, October 6, 2016 1:51 PM
To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com>
Subject: RE: [mssms] Allowing staff to add computers to collection
This is for BitLocker deployment
://technet.microsoft.com/en-us/library/mt592917.aspx#bkmk_planCol
This doesn't fit the bill?
On Thu, Oct 6, 2016 at 1:52 PM, Murray, Mike
mailto:mmur...@csuchico.edu>> wrote:
I don’t see a role that fits. :/
From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com>
We have our Endpoint Protection settings to check for updates every 8 hours,
but many clients that are online are 2, 3, even 5 days out of date. I've
verified the definition updates are being downloaded and set to deploy. I've
verified our ADR is deployed to All Systems. This is a big concern - we'
.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Monday, October 10, 2016 9:13 AM
To: mssms@lists.myitforum.com <mailto:mssms@lists.myitforum.com>
Subject: [mssms] Endpoint client definitions not updating regularly
We h
I'm sure there's an Excel guru out there that can easily explain why this
isn't working. In the "testcomp" sheet I'm trying to looking up the
distinguished name value on column C to a matching value on the "testuser"
sheet and return the friendly user name (or any other columns I choose). It
keeps
Never mind, turns out it's a limitation of VLOOKUP - the value it checks
against must be in the first column.
From: Murray, Mike
Sent: Monday, October 10, 2016 4:42 PM
To: mssms@lists.myitforum.com
Subject: OT - Excel VLOOKUP help?
I'm sure there's an Excel guru out there
only 2500 clients though so maybe that's not ideal
from a bandwidth perspective if, for example, you have 10x that.
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: Monday, October
Check this out, it might do the trick. Note, the author is leaving the
ConfigMgr community, so I don’t know if it will be updated again.
https://scottkeiffer.wordpress.com/2013/09/13/configuration-manager-web-frontend/
Mike
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.
Hey all,
I'm looking to create a high level dashboard report for management. Is
anyone doing something similar to the link below? What other data do you
display? Could you provide a report for me to try?
https://blogs.technet.microsoft.com/configmgrdude/2015/01/06/creating-a-simp
le-configm
Bump
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Wednesday, October 12, 2016 9:37 AM
To: mssms@lists.myitforum.com
Subject: [mssms] Management dashboard
Hey all,
I'm looking to create a high level dashboard repor
ta in from other sources that
you might want to show in a dashboard.
Regards,
Stephen
On Oct 13, 2016, at 11:26 AM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
Bump
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.my
this is an option, there are a few SCCM Power BI templates available.
This path will also make it easier to pull data in from other sources that
you might want to show in a dashboard.
Regards,
Stephen
On Oct 13, 2016, at 11:26 AM, Murray, Mike mailto:mmur...@csuchico.edu> > wrote:
Bump
My Endpoints are getting updated this morning. When I checked the update
package, I see an update from 10/13 that has not been superseded. There are
newer updates, so I'm not sure why this one is still there?
Best Regards,
Mike Murray
Desktop Engineer/IT Consultant - IT Support Ser
Honestly we have a mixed bag of USB keys and they all work fine. Are you
talking about standalone imaging or just putting the boot image on it?
Either way, we use a wide variety.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Chris Carbone
Sent: Monday
This should read "My Endpoints are NOT getting updated this morning."
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Monday, October 17, 2016 10:16 AM
To: mssms@lists.myitforum.com
Subject: [mssms] Old Windows Defender
ton of headaches and less
frustrated deployment techies.
//A
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
[mailto:listsad...@lists.myitforum.com] On Behalf Of Murray, Mike
Sent: den 17 oktober 2016 13:19
To: mssms@lists.myitforum.com <mai
Well, for now I'm going to set my ADR to only include updates from the last
1 day. Maybe that will help.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Monday, October 17, 2016 11:12 AM
To: mssms@lists.myitforum.com
Su
what one does over the other.
-Russell
_
From: listsad...@lists.myitforum.com <mailto:listsad...@lists.myitforum.com>
mailto:listsad...@lists.myitforum.com> > on
behalf of Murray, Mike mailto:mmur...@csuchico.edu> >
Sent: Monday, October 17, 2016 4:19 PM
To: mssms@li
I'm sure you will get many different responses - there is no single way. We
went for simplicity. Everything goes into one SUG for the current month's
updates, then get moved to a 2016 - all SUG once the next month's updates
are released. Then we set our deployments to our desired tastes.
Mike
And yes, as others have stated, don't go over 100 per SUG. I actually have
two 2016 SUGs, one is for overflow. J
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Tuesday, October 18, 2016 1:14 PM
To: mssms@lists.myitforu
Gah! We haven’t used copyprofile since the XP days.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of Jason Sandys
Sent: Thursday, October 20, 2016 12:56 PM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] default profile customization
Three gold s
Maybe try this? It’s worked for us. Admin command prompt.
"C:\Program Files\Windows Defender\MpCmdRun.exe" -removedefinitions -all
"C:\Program Files\Windows Defender\MpCmdRun.exe" -SignatureUpdate
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On
Behalf Of
I've Googled, but haven't found any definitive answers. We have some ports
that used wired NAC and computers connected to these ports require special
network settings in order to connect. We're trying to change these settings
during OSD with package that contains a PowerShell script (shown below).
Also, the script does seem to work. If I set this step to continue on error,
it goes through and the network settings are applied.
From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com]
On Behalf Of Murray, Mike
Sent: Thursday, November 17, 2016 1:07 PM
To: mssms
We have WOL enabled on our network. I'm able to wake a sleeping computer,
but not a powered off computer. I verified WOL is enabled in BIOS and the
network adapter is not getting powered off. Is this normal?
Best Regards,
Mike Murray
Desktop Engineer/IT Consultant - IT Support Ser
301 - 400 of 451 matches
Mail list logo
