Re: [Nighthawk Lovers] Hello Nighthawk Riders

Yes let’s please find a way to archive if possibleWith my best regardsMike Robinson1985 650I apologize for the brevity but wanted to respond to you most promptly. Sent from mobile device.On Mar 27, 2023, at 10:42 AM, David Shevlin wrote:Paul.thanks for your good work.  If the "service"

Re: [Nighthawk Lovers] Hello Nighthawk Riders

Before you shut down the group, I'd like to point you in the direction of a Facebook group I admin. Some of you may already be members, some of the moderators there are from the Nighthawk forum that used to exist.. https://www.facebook.com/groups/3130899273896937/?ref=share On Mon, Mar 27, 2023,

Re: [Nighthawk Lovers] 85 NH700s petcock fuel strainer

that one strainer tube is the same as another. > > You could also just use an aftermarket Petcock, and aftermarket internals. > > > On Mon, Oct 31, 2022 at 3:43 AM mike wrote: > >> Ian, it's I no longer available on this planet. >> >> On Sun, Oct 30, 2022, 1:03 AM

Re: [Nighthawk Lovers] 85 NH700s petcock fuel strainer

sembling. >> >> Sent from my iPhone >> >> On Oct 29, 2022, at 1:01 PM, William M wrote: >> >> Mike and Drew, >> thanks for your replies. >> An ad-on question, is it worth the effort to clean out the screen on the >> bottom of the petcock?

Re: [Nighthawk Lovers] 85 NH700s petcock fuel strainer

It could be worth it. It's just a little cup with an o-ring and the screen. Requiring servicing really depends on the condition of everything.. if the bike never acts like it's starved for fuel, I wouldn't. On Sat, Oct 29, 2022, 1:01 PM William M wrote: > Mike and Drew, > thanks fo

Re: [Nighthawk Lovers] 85 NH700s petcock fuel strainer

You could probably look forever and not find another Petcock screen, discontinued and hard to come by intact. There's also a small strainer filter in the bottom of the petcock bowl. On Sat, Oct 29, 2022, 1:25 AM William M wrote: > Hello All, > I took the petcock off today, intending to

[Nighthawk Lovers] What happened to the Nighthawk Forum

Nighthawk-forums.com? Had a lot of good discussions Mike Robinson I apologize for the brevity but wanted to respond to you most promptly. Sent from mobile device. > On Aug 19, 2022, at 11:14 PM, Kyle Munz wrote: > >  > That's why I went with the 2mm over the 1mm thick

Re: [Nighthawk Lovers] My poor clutch...? 85 NH 700

If you join the Facebook group,there is a free downloadable Honda shop manual as well as a ton of useful and interesting documentation. There is also an entire group and several members that would have any part you're looking for. https://www.facebook.com/groups/3130899273896937/?ref=share On

Re: [Nighthawk Lovers] My poor clutch...? 85 NH 700

https://www.facebook.com/groups/3130899273896937/?ref=share On Mon, Jul 18, 2022, 4:03 PM William M wrote: > Hello ALL, > I finally got around to bleeding the clutch for the first time since > buying the bike in March 2020. > All went well, and I then took off the lever to inspect the brass >

Re: [Nighthawk Lovers] Digest for nighthawk_lovers@googlegroups.com - 2 updates in 2 topics

Got my new spring Saturday! Mike Robinson 1985 650 - Candy Empire Blue 10k miles I apologize for the brevity but wanted to respond to you most promptly. Expect typos and short answers. Sent from mobile device. > On May 17, 2022, at 7:14 AM, Jim Frazer wrote: > re; rattle noise under

Re: [Nighthawk Lovers] Corbin Seat

Thank you  On Sat, Mar 5, 2022, 4:04 PM Dave duChêne wrote: > Here's your tracking number > Dave > > On Fri, 4 Mar 2022 at 14:26, mike wrote: > >> Awesome  thanks  >> >> On Fri, Mar 4, 2022, 1:10 PM Dave duChêne wrote: >> >>> OK,

Re: [Nighthawk Lovers] Corbin Seat

Awesome  thanks  On Fri, Mar 4, 2022, 1:10 PM Dave duChêne wrote: > OK, I'll get the seat in the mail tomorrow. > Dave > > On Fri, 4 Mar 2022 at 13:55, mike wrote: > >> It was me. From Blair. The password is "corbin" >> >> We have zelle in the

Re: [Nighthawk Lovers] Any references for someone to clean carbs in/around Maryland, on an '03 Nighthawk?

s takes longer. >> >> So long as they aren't trashed inside, the bike will run just fine. >> >> Good Luck >> >> On Thu, May 13, 2021 at 12:47 AM Kimberly Reynolds >> wrote: >> >>> These guys worked on my carbs on my ‘83 Nighthawk 650 several years

Re: [Nighthawk Lovers] Any references for someone to clean carbs in/around Maryland, on an '03 Nighthawk?

I can clean and rebuild carbs if you're able to pull them. I'm in WNY and may be too far for you. I have been doing nighthawk 700s carbs for years. On Wed, May 12, 2021, 11:09 AM mhillard wrote: > OK... I'll admit it up front... I have neglected my Nighthawk over the > last few years. No

Re: [EXTERNAL]--Re: [Nighthawk Lovers] Carb up for grabs

You meet the nicest people (working) on a Honda! Mike Robinson On Apr 14, 2021, at 8:25 PM, Gmail wrote:  This has been claimed. Good luck everybody it’s been a fun ride. Thanks, J. Greaves On Apr 12, 2021, at 11:16 PM, NghthawkLvr wrote:  Are these still available? I have a nighthawk

Re: [EXTERNAL]--Re: [Nighthawk Lovers] Carb up for grabs

Joel You’re in Wilkes? I’ll be up to get them! Where, when and how much? Mike Robinson, Distinguished Associate Global PeX Champion 828 226 0623 I apologize for the brevity but wanted to respond to you most promptly. Sent from mobile device. On Apr 10, 2021, at 11:05 AM, Gmail wrote

Re: [Nighthawk Lovers] a single no start day...

Starters are expensive for these bikes. I saw you've been warned about that stater chain already. Take it seriously. It brings down a lot of bikes. I have an 1984 red with 15.9k miles on it... Broken starter chain. I'm going to repair it. As far as the engine guards, the oy ones from Honda are

Re: [Nighthawk Lovers] 1985 700s fuel gauge

d. > > I love the car. > > Gary > > On Sun, Jul 26, 2020 at 3:23 PM mike wrote: > >> I'd it happens to be the gauge I have spares. >> >> On Sun, Jul 26, 2020, 3:19 PM Kyle Munz wrote: >> >>> I'd say chances are better than even the problem is in

Re: [Nighthawk Lovers] 1985 700s fuel gauge

I'd it happens to be the gauge I have spares. On Sun, Jul 26, 2020, 3:19 PM Kyle Munz wrote: > I'd say chances are better than even the problem is in the sending unit > and not the gauge. > > -Kyle > > > On Sun, Jul 26, 2020 at 10:55 AM Dave duChêne wrote: > >> Clean all connections leading to

Re: [Nighthawk Lovers] email a NHL member on the map?

Link me to the map? On Sat, Jul 4, 2020, 3:08 PM Graham Rogers wrote: > I don’t know. Easy to just say ‘here I am’ > > On Sat, Jul 4, 2020 at 2:05 PM mike wrote: > >> Map? >> >> On Sat, Jul 4, 2020, 10:30 AM Graham Rogers >> wrote: >> >>&

Re: [Nighthawk Lovers] email a NHL member on the map?

Map? On Sat, Jul 4, 2020, 10:30 AM Graham Rogers wrote: > Just tell us where you are and you’ll have done it > > On Sat, Jul 4, 2020 at 10:00 AM William M wrote: > >> Good morning All, >> is it possible to attempt to email a NH neighbor from the map? >> Thanks, William >> >> -- >> You received

Re: [Nighthawk Lovers] Re: Life here on Nighthawk Lovers

Yup, same people new name. That's who made that full fairing. On Tue, Jun 30, 2020, 9:08 PM Graham Rogers wrote: > Gustafsson Plastics (www.bikescreen.com) > > On Tue, Jun 30, 2020 at 9:04 PM mike wrote: > >> The specII site? Formerly telefix? >> >> >>

Re: [Nighthawk Lovers] Re: Life here on Nighthawk Lovers

Jaso-ma or jaso-ma2 oil synthetic or not On Mon, Jun 29, 2020, 3:59 PM Ric Holder wrote: > I have a 1984 750 nighthawk (canadian model). I was told to always use a > oil with a Zink base. Stay away from synthetic. > > Sent from my BlackBerry 10 smartphone on the Bell network. > *From: *gary

Re: [Nighthawk Lovers] New proud owner of '85 700S

You would have to change the swing arm. Not much swaps to the 700s. Enjoy your bike. On Sun, Jun 28, 2020, 11:19 AM gary glick wrote: > There is a complete Honda shop manual on the internet, free. > > I do not remember the address but it was compressed and had to be > uncompressed after

Re: [Nighthawk Lovers] 85 700s red-Need right side cover-Best Led headlight bulb recommendation-Hondaline (or good quality recommendation) engine guard-was hondaline chrome in color?

Picture? On Fri, Jun 26, 2020, 9:53 PM Drew Gormley wrote: > Hey while we're all at it, I need to swap a side panel myself. I bought a > dark red (burgundy) on ebay by accident and instead need that more cherry > red. > > That is if anyone is in need of a trade. Anyone have a left cherry red

Re: [Nighthawk Lovers] 85 700s red-Need right side cover-Best Led headlight bulb recommendation-Hondaline (or good quality recommendation) engine guard-was hondaline chrome in color?

Did you have pictures? How many did you want to sell? On Fri, Jun 26, 2020, 9:08 AM Tommy Hill wrote: > I have a couple of right side covers. What color do you need? > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To

Re: [Nighthawk Lovers] Re: 85 700s red-Need right side cover-Best Led headlight bulb recommendation-Hondaline (or good quality recommendation) engine guard-was hondaline chrome in color?

I have purchased and sold 3 sets of black hondaline crash bars. On Sat, Jun 13, 2020, 4:01 PM 'MOPARJOE' via Nighthawk Motorcycle Lovers! < nighthawk_lovers@googlegroups.com> wrote: > Yes, the HONDALINE crash bars were chrome (don't know if I've seen them in > black, but would think they would

Re: [Nighthawk Lovers] Re: 85 700s red-Need right side cover-Best Led headlight bulb recommendation-Hondaline (or good quality recommendation) engine guard-was hondaline chrome in color?

Would you please share the contact information? On Sat, Jun 13, 2020, 3:40 PM Ric Holder wrote: > Here in Ontario there is a repair shop called the Plastic Surgeon ( no > joke). He made me new pins and plastic welded them on for me. I still had > to have a bit of body work done to them and

Re: [Nighthawk Lovers] Re: 85 700s red-Need right side cover-Best Led headlight bulb recommendation-Hondaline (or good quality recommendation) engine guard-was hondaline chrome in color?

>From time to time, repop tabs show up on eBay. Trim to length and eboxy. On Sat, Jun 13, 2020, 3:04 PM gary glick wrote: > > > On Friday, June 12, 2020 at 9:30:27 PM UTC-4, gary glick wrote: >> >> Waiting for my bike to be delivered. Also looking for an owners manual. >> Tool kit would not be

RE: [Nighthawk Lovers] paint matching

My local Advance Auto brought out a ‘gun’, shot the paint and handed me a pint that was spot on with 15 minutes. Mike “I’m happy to be here and just hope that I can help the ball club.” Nuke LaLoosh From: nighthawk_lovers@googlegroups.com On Behalf Of Ric Holder Sent: Thursday, May 28

Re: [Nighthawk Lovers] 1972 CB500

Sweet i had this bike back in 79 my 1st bike On Fri, Apr 19, 2019, 6:04 PM Graham Rogers wrote: > This is what my cousin is riding in New Plymouth, New Zealand. He looked > everywhere for this model, this year. He checked around the world and guess > where he found this one? New Plymouth, NZ,

Re: [Nighthawk Lovers] Re: Sidecar hack

Love the storytelling On Wed, Apr 17, 2019, 9:03 PM mark weisenfeld wrote: > Funny, you saying this right now. I met at a guy with Ural outside the > bank while my wife was inside doing business. He caught my eye also because > he had his timing light out and was adjusting the timing, in the

Re: [Nighthawk Lovers] 1984 Honda 450 SL, nighthawk

Hey sorry i didnt send pictures yet been swamped will send a few today for sure! On Sun, Apr 7, 2019, 7:51 AM Tommy Hill wrote: > Hey Michael, > > Can you send me a few pics? > Ominbound at gmail > > -- > You received this message because you are subscribed to the Google Groups >

Re: [Nighthawk Lovers] Re: Carbs started leaking out of the

mailSignature> On Wed, Mar 20, 2019 at 1:29 PM, mike beatty wrote: This is what i did to my hawkyou guys like? On Mar 19, 2019 5:39 PM, "bobshel...@gmail.com" wrote: You will definitely need to try some leaning if it's spitting fuel out the exhaust! That's a 120 jet. Sent from Ya

Re: [Nighthawk Lovers] Re: Carbs started leaking out of the

mailSignature> > > On Wed, Mar 20, 2019 at 1:29 PM, mike beatty > wrote: > This is what i did to my hawkyou guys like? > > On Mar 19, 2019 5:39 PM, "bobshel...@gmail.com" > wrote: > > > You will definitely need to try some leaning if it's spittin

Re: [Nighthawk Lovers] UK members

Are there any trike kits available for 2000 750 night hawk used is ok as well On Wed, Mar 6, 2019, 12:36 PM bobshel...@gmail.com wrote: > Thanks! We love to help. It's about riding and saving $. Ride safe brother! > > Sent from Yahoo Mail on Android >

[Nighthawk Lovers] Re: 84 cb650sc oil filter washer

If no one is doing an oil change any time soon, maybe this can help... Thats Honda pn 15414-300-000 >From an ebay ad looks like OD 30mm, ID 20mm, I'd hazard to guess a few mm thick. If your local store is SAE only,

Re: [Nighthawk Lovers] Exhaust Pipes

Thanks for that catch kiwin. 93, 750K. Ad corrected, too. On Monday, February 12, 2018 at 9:52:47 PM UTC-5, kiwinPA wrote: > > > Year and model nighthawk, 650 or 700SOn Mon, Feb 12, 2018 at 9:47 PM Mike < > hend...@gmail.com > wrote: > >> Dollars to donuts

[Nighthawk Lovers] Re: My 1986 Honda sc700s nighthawk

I have the shop manual for this bike that I'd like to sell for a non-outlandish amount of rapidly depreciating American dollars (30, plus shipping, to be exact). It's in very good shape. Best, Michael C. On Sunday, December 17, 2017 at 6:58:38 PM UTC-5, Mark Schroeder wrote: > > Hi all Honda

[Nighthawk Lovers] Exhaust Pipes

Dollars to donuts this is not the first time for this question, but it is for me. My ace Nighthawk artisan appears to have either uncovered rust in my pipes, or broken one or two of the connections while disassembling. The mufflers are fine and they're stock originals. It looks like I may be

[Nighthawk Lovers] Bright Night Lights

Friends: I've heard much about the super bright headlight bulbs one can use to replace standard issue. ('92 Nighthawk 750) Suggestions on brand and type appreciated, as well as any downsides that people might have failed to tell me about. Thank you. -- You received this message because you

Re: [Nighthawk Lovers] Handlebars

Not to be "that guy" but I've never seen 3/4" bars Most Japanese and metric (euro) bikes are 7/8" bars (or 22mm for most of the world). Some "cruiser" types can have 1" bars so all the JPCycles cruiser farkles marketed at the HD crowd fit. For more complete information, the wikipedia blurb

Re: [Nighthawk Lovers] Center Stand

Before I aired up the tires on my NH650, the center stand was a struggle. Proper inflation and the center stand was much easier. Tires can be a factor. On Thursday, August 25, 2016 at 7:34:40 PM UTC-4, Brian wrote: > > I have a ST1100 that when I got the bike the previous owner put lower >

[Nighthawk Lovers] Re: 1985 700s Intermitten Fuel Leak

I had to separate my rack of carbs for these leaks this week. I have an 84 650. I took my cheap digital calipers to them and made some measurements Heres what the loaded cart looks like on theoringstore.com http://imgur.com/b3HoFtL On Wednesday, July 27, 2016 at 9:12:06 PM UTC-4, Mike wrote

[Nighthawk Lovers] Re: Question about 650 Performance

Power restrictions are a thing they do in the UK. They have a graduated motorcycle license that is restricted by HP. I've heard in some applications they use restrictor plates in the intake path. On Thursday, July 28, 2016 at 3:22:22 AM UTC-4, Paul wrote: > > I had a 650 owner from the UK email

[Nighthawk Lovers] Re: 1985 700s Intermitten Fuel Leak

Regular rubber o-rings work... for a while. Then the gas rots em enough that you move em a bit and they fall apart. You need to make sure they are buna n or viton if you want them to not rot in gas/oil On Tuesday, July 26, 2016 at 8:49:30 PM UTC-4, FLIGHT 327 wrote: > > > My 700S leaks fuel

[Nighthawk Lovers] Clutch not engaging- any similar experiences

a similar problem. thanks in advance...Mike -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.co

[Nighthawk Lovers] Clean carbs, new battery, won't stay alive

So my 650 sat for a long time, I disassembled and cleaned the carbs, got a new battery, and I can't keep the thing started. Mostly it will just turn and not survive more than 1-2 seconds. Using starter fluid directly into the carb the best I was able to manage was about 20 seconds of the

[Nighthawk Lovers] Re: Looking for an '84-86 CB 700 SC luggage rack??

Have both the same NH as you and a luggage rack. It is NOT oem. My local friendly mechanic says it will fit but I don't care to put it on. It's not new, but it's nice. It's in my office at work and I'll shoot a pic or two for you to look at. If you like it, $35 of Uncle Sam's currency, plus UPS

[Nighthawk Lovers] 86 700SC

I know hands off bars is not a recommended way to ride, and I don't. However, I do find on my 86 700sc that hands off (briefly) at any speeds from 20-60mph and I get some serious tank slapping front wheel wobble. Nothing noticeable when driving hands on, but cornering doesn't feel quite right.

Re: [Nighthawk Lovers] Need Help:

Seems to be working, leaks have slowed down, plan on working on them again tomorrow. Thanks -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [Nighthawk Lovers] Need Help:

Thanks will learn -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email

[Nighthawk Lovers] Need Help:

County in Michigan. Called two Honda dealers and they stated they do not work on bikes that are over 10 years old. Does anyone know of anyone that can work on this bike in this area? Can't wait to get out and ride again. Thanks, Mike -- You received this message because you are subscribed

[Nighthawk Lovers] Dealer Service:

I have a 1984 Honda Night Hawk S 700cs and can not fine anyone to work on it. If you know of someone in the Michigan area I would appreciate it. -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and

[Nighthawk Lovers] 86 700c (I think)

On the cusp of purchasing an 86, 700c, the one with the abbreviated instrument nacelle. Suggestions appreciated for acquiring and installing both a more protective windshield, and some kind of backrest for my favorite passenger. Thanks, all. -- You received this message because you are

[Nighthawk Lovers] 93 750 Nighthawk

Sources appreciated, please, for 1993 Nighthawk 750 for (a) operator manual (b) shop manual. Thank you. -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an

[Nighthawk Lovers] 99 250 Nighthawk

Question: easy for some, but new for me. 99 250 Nighthawk. I understand valve settings to be 3/1000 for both inlet and exhaust. Will I need a replacement gasket when removing/replacing the cover? Thanks. -- You received this message because you are subscribed to the Google Groups Nighthawk

Re: [Nighthawk Lovers] Electrical Problems...brake lights and turn signals

switch and the clutch switch controlling power to the starter relay. The front turn signals should act as running light though but that function uses the orange/white and blue/white wires. Sent via BlackBerry by ATT -- *From: * Mike m.sz...@gmail.com javascript

Re: [Nighthawk Lovers] Electrical Problems...brake lights and turn signals

), or possibly a bad diode. Do you have a manual or wiring diagram? I'll look at one tonight and see if I can give you a hand with a testing methodology. Sent via BlackBerry by ATT -- *From: * Mike m.sz...@gmail.com javascript: *Sender: * nighthaw...@googlegroups.com

[Nighthawk Lovers] Electrical Problems...brake lights and turn signals

Hey everyone! I have a 1992 Nighthawk 750 that ive slowly been putting together after Sandy. Its been a long process, and Im so close to the end, but Im stumped. My brake lights do not work (however the tail lights do) and my turn signals are always on. When I try to use the turn signal

[Nighthawk Lovers] help

my 1993 nighthawk wont start already cleand the carb after sitting for 6 years. cleaned the gas tank got it running for a day. turened it of and now it wont start at all help -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To

[Nighthawk Lovers] Passenger Back Rest

Would appreciate helpin locating a factory-made passenger backrest to install on a 250 Nighthawk, 1999. Thanks, all. -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from

[Nighthawk Lovers] 99 250 Nighthawk.

Any input on this bike's ability to mount a rear carry rack and some kind of top box much appreciated. Thanks. -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send

[Nighthawk Lovers] The table has been turned

I have gone from the outcast with the Honda to the hero on the motorcycle. The Harley guys are now in awe of me. Here at work, where the Harley guys were relentless in their ridiculing of my 1800 Vtx and my Night hawk, things have changed. we have limited parking here at work and the

[Nighthawk Lovers] Sick and tired!

as far as to tell me I can't park my bike (650 nighthawk or my 1800 vtx) at work because this is an american plant and they don't want any junk in the lot. Let me tell you, my VTX will blow their Harleys away any day. Sorry, I just had to vent. Thanks for allowing me the forum to do it. Mike

Re: [Nighthawk Lovers] Sick and tired!

can't ride unless it's straight anyway. Sent via BlackBerry by ATT From: Mike Erickson rafon...@gmail.com Sender: nighthawk_lovers@googlegroups.com Date: Wed, 16 May 2012 18:31:56 -0500 To: nighthawk_lovers@googlegroups.com ReplyTo

RE: [Nighthawk Lovers] Sick and tired!

His car is a Toyota, so I give no credence to him, it is just really annoying. On May 16, 2012 8:53 PM, Pastor Ron pastor...@cox.net wrote: Mike, smile and walk away. You don’t want him ticked in this job market. If he presses you, you may want to ask him that American made vehicles

Re: [Nighthawk Lovers] some rather interesting finds on cl?

Estimate the weight and dimensions of the box and you can use UPS or Fedex website for cost. Mike On May 15, 2012 4:03 PM, Kurt Nolte vturbine.po...@gmail.com wrote: Anyone have a ballpark estimate on what shipping that much -should- cost? Need to make sure I won't blow too much running parts

[Nighthawk Lovers] Tire info

OK, before I turn my 1984 650 Nighthawk over to my wife to start riding, I need to replace the tires. Does anyone know anything about Shinko brand tires? A friend of mine told me that since she will only be riding it on city streets (no highway riding) that they would be a good inexpensive tire.

[Nighthawk Lovers] Thanks for the help.

I found a pair of handlebars to fit my 84 Nighthwak 650 (thanks to the dimensions provided by some of you). I have been working on it for about a month now and took it out for my first ride on Sunday! It was great until the rain came in. Now that it is up and running (and safe on the road) it

Re: [Nighthawk Lovers] Re: 1984 cb650 Nighthawk handlebars

Here are some photos as promised. I hope that this link works. https://picasaweb.google.com/106011619016468537634/MyMotorcycles?authuser=0feat=directlink Mike On Sun, May 6, 2012 at 8:06 PM, rafone66 rafon...@gmail.com wrote: I found a pair of handlebars to fit my 84 Nighthwak 650. I have

[Nighthawk Lovers] Rich Mixture 250 N'hawk

Friends: On my 99 250 NH the only adjustment screw I find is under the carb. Bike runs great, idles fine and I'm not anxious to mess with success. But...plugs are very sooty, and idle, though good, sounds a tad as if the choke is on (it's not). Should I screw in for leaner, or out, or leave the

[Nighthawk Lovers] 250 Nighthawk

Love this little bike. Runs perfectly but a tad rich. Is the mixture screw the one underneath the carb? Thanks. -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group, send email to

[Nighthawk Lovers] Bike will stall at high speeds...

I have a 92 Nighthawk 750. When I start it up in the morning, I put the choke on about half way. It seems sluggish at first but then it gets going aroung 1500rpm. I let that run for about 5-10 minutes, then I get on to ride. I take to my corner (1 block away) the I turn the choke off. When I

[Nighthawk Lovers] 250 Nighthawk 1999

Where, please, is the mixture adjusting screw to be found on my 250 Nighthawk's carb. Which way for rich and which way for lean. Thank you -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group, send email to

[Nighthawk Lovers] '99 250 seat

Mr Corbin and the like don't seem to offer a replacement and more cushy seat for my 250 Nighthawk. I know about Airhawk strap on alternatives but wonder if others know of a total replacement seat available on the market. Thanks, Michael C. -- You received this message because you are subscribed

Re: [Nighthawk Lovers] Looking for that Custom Look for your Older bike?

Ridiculous. Lol Sent from my iPhone On Aug 24, 2011, at 10:27 PM, Joey Kelley sandp...@gmail.com wrote: http://www.batrodz.com/packages_cycle.htm Just when I thought I'd seen everything. -Joey -- -Joey Kelley JoeyKelley.com - My Life Online JoeyFixesComputers.com - Its

Re: [Nighthawk Lovers] Re: Off-Topic: Honda CB1000f

miles on that bike? Sent from my iPad On Jul 15, 2011, at 10:30 PM, Mike Dosreis mpdo...@gmail.com wrote: 1993 Honda Nighthawk 750 $2000 Revere - motorcycles/scooters - by owner 2011-07-15, 5:48PM EDT Sent from my iPhone On Jul 15, 2011, at 10:07 AM, Allen Thomas althomas

Re: [Nighthawk Lovers] Re: Off-Topic: Honda CB1000f

1993 Honda Nighthawk 750 $2000 Revere - motorcycles/scooters - by owner 2011-07-15, 5:48PM EDT Sent from my iPhone On Jul 15, 2011, at 10:07 AM, Allen Thomas althomas...@gmail.com wrote: They want too much for it like $4000. Check their website it is immaculate with low miles though.

Re: [Nighthawk Lovers] Google+ Invite

What is google +? On Mon, Jul 11, 2011 at 3:18 PM, Matt Temple heuris...@gmail.com wrote: Count me in. heuris...@gmail.com Matt Temple On Sat, Jul 9, 2011 at 11:02 PM, Paul p...@hondanighthawks.net wrote: Hey Nighthawk Lovers, If you have a Gmail address and would like an invite to

Re: [Nighthawk Lovers] Re: Customized Honda - was it a Nighthawk?

Same here. To crazy for me. Sent from my iPhone On Jun 2, 2011, at 6:57 PM, Paul p...@hondanighthawks.net wrote: I'm gonna have to do with bad as in yuk. Sorry...personal preference. :/ On Thu, Jun 2, 2011 at 4:54 PM, Hawaii Sean sfox...@yahoo.com wrote: The good / bad news is Hawaii does

Re: [Nighthawk Lovers] My 84 Nighthawk

It's a 650 Sent from my iPhone On May 25, 2011, at 9:29 AM, grahamwr graha...@ptd.net wrote: Mike, welcome to the group. NH what? a 650 or 700S, Graham On Wed, 25 May 2011 02:02:39 -0400, Michael Dosreis mpdo...@gmail.com wrote: I had been looking for a dependable ride for the season

Re: [Nighthawk Lovers] netural switch

thanks will check it out From: Kyle Munz kyle...@gmail.com To: nighthawk_lovers@googlegroups.com Sent: Tue, March 29, 2011 8:20:12 AM Subject: Re: [Nighthawk Lovers] netural switch The gear selector switch right above the left foot peg controls the neutral

Re: [Nighthawk Lovers] Not exactly On Topic: Different Motorcycle Engine Configurations

they corner great  where the old hogs float up high in the corners From: Joey Kelley sandp...@gmail.com To: nighthawk_lovers@googlegroups.com Sent: Tue, March 29, 2011 8:20:04 AM Subject: Re: [Nighthawk Lovers] Not exactly On Topic: Different Motorcycle Engine

[Nighthawk Lovers] CB550SC rotor

for my bike? Thanks Mike -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group, send email to nighthawk_lov...@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr

[Nighthawk Lovers] Clutch Adjustment

With a lifetime of riding and a still growing collection of bikes, the little 99 250 Nighthawk I, ostensibly, bought for my son just might be my favorite ride. The clutch drags a tad, however. Just inconvenient enough to not be able to select neutral with the engine running when the bike is

[Nighthawk Lovers] ignition switch

Have any of you replace an ignition switch on a 700s? Where did you get one? Any tips? Thanks Mike -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group, send email to nighthawk_lov...@googlegroups.com

[Nighthawk Lovers] Re: electrical issues

Thanks, Kyle! I do have a shop manual. The problem is I am in the middle of moving and the manual is in storage right now, two hours away. I plan to try to get it soon and do as you suggest. Mike On Mar 11, 6:40 am, Kyle Munz kyle...@gmail.com wrote: Do you have the shop manual? If not I can

[Nighthawk Lovers] electrical issues

to replace? Thanks for helping! Mike -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group, send email to nighthawk_lov...@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr

[Nighthawk Lovers] key on, nothing lights up

happened? Thanks Mike -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group, send email to nighthawk_lov...@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr

[Nighthawk Lovers] coating a fuel tank

I know that we have covered this issue before, but I haven't found it - what is the best product and method for coating the inside of the fuel tank for 84 700s? Thanks in advance for your consistent help! Mike Prince -- You received this message because you are subscribed to the Google Groups

[Nighthawk Lovers] Removal from E-mail mailing list

Hi, Michael here. Wanted to know if I could be removed from the e-mail mailing list. Thank you my Email is mike...@hotmail.com _ Bing brings you maps, menus, and reviews organized

[Nighthawk Lovers] Hello Everyone

Hello Everyone! I just joined this group and wanted to introduce myself. I look forward to some great conversations. M --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to

[Nighthawk Lovers] Re: Hearing issues

Stanley, I do have amalgam fillings. I will research this. thanks Mike On Sep 17, 3:27 pm, stanley/ Randolph tinkrm...@yahoo.com wrote: Once again, I ask: do you have any amalgam fillings in your mouth?   Get them out.  They will cause tinnitis, among other things.  It could be the noise

[Nighthawk Lovers] Re: forks

Yes, I have the manual and have read the pages. Thanks! I am a little intimidated by the process. If several non-pro mechanics have done it without problem, then maybe I will try it. Thanks Mike On Sep 16, 11:26 pm, Dennis Hammerl blues...@yahoo.com wrote: Do you have the OEM shop manual

[Nighthawk Lovers] Re: forks

You guys are awesome! Thanks for your help! Mike On Sep 17, 1:42 pm, Dennis Hammerl blues...@yahoo.com wrote: I can make it a bit easier. Loosen the caps on the top of the forks while they are still on the bike before you loosen the clamp bolts that hold the forks. DON'T REMOVE THE CAPS

[Nighthawk Lovers] forks

with the results? Any tips?Mike --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group, send email to nighthawk_lovers@googlegroups.com To unsubscribe from this group, send email

[Nighthawk Lovers] Hearing issues

of ear plugs. Have any of you had this happen? I have ridden for 40 years and this is new to me. Thanks! Mike --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To post to this group

[Nighthawk Lovers] Re: Antique Nighthawk?

I just got an antique plate on my 84 nighthawk 700 a few weeks ago. No real limits on useage in Arkansas. Mike On Jun 17, 8:49 am, Jeff Rumer magilla...@yahoo.com wrote: To satisfy my own curiosity, I went to the BMV to inquire about how old a motor vehicle has to be before it is an antique

[Nighthawk Lovers] fuel line

Hello, everyone!I just had a friend rebuild my carbs on my 84 700s. It runs much better now. I need a new fuel line. The old one seems to be pre-formed line. Can anyone direct me to a good source for a new fuel line? Thanks! Mike Prince

  1   2   >