Re: [NTG-context] Software upgrade for ntg and contextgarden server 6 April

KUDOS to you guys and thanks a *lot*! W Am 11.04.23 um 22:42 schrieb Taco Hoekwater via ntg-context: Hi, So … the server now runs Ubuntu 22.04. Jay! This was a much harder upgrade though. ... In any case, today was the last of the big software update procedures Best wishes, Taco and Jules

Re: [NTG-context] Software upgrade for ntg and contextgarden server 6 April

On 4/11/2023 10:42 PM, Taco Hoekwater via ntg-context wrote: In any case, today was the last of the big software update procedures (at least for the next year or so). Thanks for doing this! Hans -

Re: [NTG-context] Software upgrade for ntg and contextgarden server 6 April

Hi, So … the server now runs Ubuntu 22.04. Jay! This was a much harder upgrade though. Various things were wrong, and are likely still a bit wrong in places. Robbert had to rescue the network configuration that went missing completely after the upgrade (requiring a trip to the data center

Re: [NTG-context] Software upgrade for ntg and contextgarden server 6 April

Hi again, from the other side! Jules has just finished with all the updating and restarting for now, and at first glance everything seems to be OK. The server now runs Ubuntu 20.04. Jay! If you notice anything wrong, please warn either me personally or ntg-ser...@ntg.nl. Unless major

[NTG-context] Software upgrade for ntg and contextgarden server 6 April

ConTeXt wiki, and some other subsites of contextgarden.net. We expect to the outage to last a few hours at most. I do not have an exhaustive list of potentially affected services and lists, so this message is sent out to the two largest mailing lists on the server. If you know of some other

Re: [NTG-context] Visual highlighted text with title, mix of enumeration and framedtext

On Mon, 6 Mar 2023, Henning Hraban Ramm via ntg-context wrote: > Am 06.03.23 um 12:19 schrieb Gerion Entrup via ntg-context: > > I want to typeset a "Good to know" section that is visually highlighted > > and can spawn across multiple pages. > > > > In

Re: [NTG-context] Visual highlighted text with title, mix of enumeration and framedtext

Am 06.03.23 um 12:19 schrieb Gerion Entrup via ntg-context: I want to typeset a "Good to know" section that is visually highlighted and can spawn across multiple pages. In LaTeX this would be possible with the mdframed package. See the attached screenshot for an example how it might

[NTG-context] Visual highlighted text with title, mix of enumeration and framedtext

Hi, I want to typeset a "Good to know" section that is visually highlighted and can spawn across multiple pages. In LaTeX this would be possible with the mdframed package. See the attached screenshot for an example how it might look like (it is copied out of page 4: Definition: Inh

Re: [NTG-context] \typefile not including file and returning success

taking so long. But I just now tested your fix and wanted to remove the absolute paths from my document and found that either your fix is not working or I'm doing something wrong (probably the latter). Example: # create file “bar” echo Bar > bar %% \adddefaultsuffix[foo,{},crap,bar] \add

Re: [NTG-context] Chapter number and titles in separate lines with grid layout

I somehow found a way. It doesn't work on my minimal example but it does in my real doc. I tested a lot of thing but I think it was thanks to the offset=none parameters For the record: ### \define[2]\MySection{ \framed[ location=top, strut=no, offset=none,

Re: [NTG-context] Chapter number and titles in separate lines with grid layout

On 2023-02-15 08:44, Alex Leray via ntg-context wrote: \showframe \showlayout \showgrid \setuplayout[     grid=yes, ] \define[2]\MySection{\framed[     location=keep,     frame=on,     width=broad,     % height=22pt,     align=middle ]{{#1.\\#2}}} \setuphead[section][     strut=no,     conve

Re: [NTG-context] Chapter number and titles in separate lines with grid layout

On 2023-02-15 08:44, Alex Leray via ntg-context wrote: \showframe \showlayout \showgrid \setuplayout[     grid=yes, ] \define[2]\MySection{\framed[     location=keep,     frame=on,     width=broad,     % height=22pt,     align=middle ]{{#1.\\#2}}} \setuphead[section][     strut=no,     conve

Re: [NTG-context] Makeup and page numbering increment

On 2/15/23 12:40, Alex Leray via ntg-context wrote: > Thanks a lot Wolfgang, that's perfect! > > I added an example in the wiki: > > https://wiki.contextgarden.net/Command/setupmakeup Hi Alex, many thanks for adding the info to the wiki. Just in case it might help, I added an explanation to th

[NTG-context] Chapter number and titles in separate lines with grid layout

Hello again, I'm having another issue: I'd like Chapter/Section number and titles in separate lines but with grid alignement. I followed that advice: https://wiki.contextgarden.net/Titles#Chapter_number_and_titles_in_separate_lines I'm having an issue though: I can't

Re: [NTG-context] Makeup and page numbering increment

Thanks a lot Wolfgang, that's perfect! I added an example in the wiki: https://wiki.contextgarden.net/Command/setupmakeup Have a good day, Alex Le 15/02/23 à 12:03, Wolfgang Schuster via ntg-context a écrit : Alex Leray via ntg-context > schrieb am Mi., 15. Feb. 202

Re: [NTG-context] Makeup and page numbering increment

Alex Leray via ntg-context schrieb am Mi., 15. Feb. 2023, 11:59: > Hi Mikael, > > here it is: > > %%% > \definemakeup [title] [doublesided=empty] > Add pagestate=start to the settings. Wolfgang ___ If your question

Re: [NTG-context] Makeup and page numbering increment

Hi Mikael, here it is: %%% \definemakeup [title] [doublesided=empty] \starttext \input knuth \starttitlemakeup Title \stoptitlemakeup \input knuth \stoptext %%% thanks Le 15/02/23 à 11:43, Mikael Sundqvist via ntg-context a écrit : Hi, and welcome back! On Wed, Feb 15, 2023 at 11:42 AM

Re: [NTG-context] Makeup and page numbering increment

Hi, and welcome back! On Wed, Feb 15, 2023 at 11:42 AM Alex Leray via ntg-context wrote: > > Dear Context users, > > I'm new to this mailing-list. I've decided to use Context for two > separate publications. My previous experience with Context was almost 10 > yea

[NTG-context] Makeup and page numbering increment

Dear Context users, I'm new to this mailing-list. I've decided to use Context for two separate publications. My previous experience with Context was almost 10 years ago and it seems like the resources on Context have greatly expanded. So thank you all! There is a little thing th

[NTG-context] Fwd: BachoTeX 2023: invitation and call for papers

Weitergeleitete Nachricht Betreff: BachoTeX 2023: invitation and call for papers Datum: Wed, 1 Feb 2023 20:33:11 +0100 Von: Jerzy.Ludwichowski Dear Friends, please pass on the BachoTeX 2023 announcement to your members. With best wishes, -- Jerzy Ludwichowski

Re: [NTG-context] How to create multi-line headers and footers?

fits on just one-side, one page. Finally, in the footer, is contact information and some other closing details. == TITLE <-- big title <-- introduction paragraph == -- -- <-- body text -- == <-- messa

[NTG-context] How to create multi-line headers and footers?

footer, is contact information and some other closing details. ==TITLE <-- big title <-- introduction paragraph == <-- body text --== <-- message in footer == I tried placing that all into a macro called &q

Re: [NTG-context] Can ConTeXt print specific paragraph and sentences from an input file?

I've tried to keep all of the input files entirely plain text, as much as possible. The exception is two custom macros used to mark citations that are in the text, \turabian{}{}{} and \ibid{}{}{}. I could find no way of getting around including that in the text, as legally I must includ

Re: [NTG-context] autospacing and colonequals (was Lucida-1.901 (2023-01-21) available)

On 1/27/2023 6:58 PM, Aditya Mahajan via ntg-context wrote: On Fri, 27 Jan 2023, Hans Hagen via ntg-context wrote: On 1/27/2023 6:26 PM, Otared Kavian via ntg-context wrote: Hi Hans, Thank you for the hint: indeed \setupmathematics[collapsing=2] does exactly what I was looking for… Now, like

Re: [NTG-context] autospacing and colonequals (was Lucida-1.901 (2023-01-21) available)

On Fri, 27 Jan 2023, Hans Hagen via ntg-context wrote: > On 1/27/2023 6:26 PM, Otared Kavian via ntg-context wrote: > > Hi Hans, > > > > Thank you for the hint: indeed > > \setupmathematics[collapsing=2] > > does exactly what I was looking for… > > > > Now, like many others, I am just waiting fo

Re: [NTG-context] autospacing and colonequals (was Lucida-1.901 (2023-01-21) available)

On 1/27/2023 6:26 PM, Otared Kavian via ntg-context wrote: Hi Hans, Thank you for the hint: indeed \setupmathematics[collapsing=2] does exactly what I was looking for… Now, like many others, I am just waiting for the 3145 pages document about maths in ConTeXt :-) It will be 3147 because we ne

Re: [NTG-context] autospacing and colonequals (was Lucida-1.901 (2023-01-21) available)

Hi Hans, Thank you for the hint: indeed \setupmathematics[collapsing=2] does exactly what I was looking for… Now, like many others, I am just waiting for the 3145 pages document about maths in ConTeXt :-) Best regards: Otared > On 26 Jan 2023, at 23:23, Hans Hagen via ntg-context

Re: [NTG-context] Can ConTeXt print specific paragraph and sentences from an input file?

on the kind of input, coding etc .. how reliable is is to recognize a sentence and such, but given that tex is a programing environment all is possible in the end Hans - Hans Hagen

[NTG-context] Can ConTeXt print specific paragraph and sentences from an input file?

Assuming I have an input file with an essay: \starttext \input essay \stoptext Is there any command to tell ConTeXt to print a specific sentence, e.g. the first sentence from paragraph 2, or the last sentence from paragraph 1, etc? --Joel __

Re: [NTG-context] autospacing and colonequals (was Lucida-1.901 (2023-01-21) available)

On 1/26/2023 10:52 PM, Otared Kavian via ntg-context wrote: Indeed the command \colonequals give the precise expected alignment for the combination glyph « := ». Befors changing the combination « := » to \columnequals in my documents, I am wondering whether one could add a small lua code in or

Re: [NTG-context] autospacing and colonequals (was Lucida-1.901 (2023-01-21) available)

Hi Hans and Mikael, Thank you both for your attention to my reply and the clarification and hints regarding the comman \colonequals and \setupmathematics[autospacing=yes] Indeed the command \colonequals give the precise expected alignment for the combination glyph « := ». Befors

Re: [NTG-context] What's the current method for using a variable font in Context and Metapost?

olucci via ntg-context : >And how do you set the light variation? > >On Fri, Jan 20, 2023 at 2:08 AM Lutz Haseloff via ntg-context < >ntg-context@ntg.nl> wrote: > >> Hi Guido, >> >> >> this works here: >> >> \starttext >> Test

Re: [NTG-context] What's the current method for using a variable font in Context and Metapost?

And how do you set the light variation? On Fri, Jan 20, 2023 at 2:08 AM Lutz Haseloff via ntg-context < ntg-context@ntg.nl> wrote: > Hi Guido, > > > this works here: > > \starttext > Test Test > > \usemodule[fonts-variable] > \definefontfamily [mainface]

[NTG-context] A new version of the PocketDiary module and a collection of examples for creating calenders

Hi everybody, I uploaded a new version of the PocketDiary module to the ConTeXt garden. The version 2.2 is providing the calendar functionality as it is presented in PocketMods (https://pocketmod.com/). It includes day, week, month and year tables. There are two variations of the outcome. The

Re: [NTG-context] What's the current method for using a variable font in Context and Metapost?

Hi Guido, this works here: \starttext Test Test \usemodule[fonts-variable] \definefontfamily [mainface] [ss] [bahnschrift] \setupbodyfont[mainface] \ss 123456789 Wild! \medskip \startMPcode picture pic; pic := thelabel(textext("\ss This is in Metafont 0123456789"), (0, 0)); draw pic; \stopMP

[NTG-context] What's the current method for using a variable font in Context and Metapost?

I haven't been able to find working examples. Here is some sample code. I would really like to be able to use the light variation of this DIN-like font. \usemodule[fonts-variable] \definefontfamily [mainface] [ss] [bahnschrift] \setupbodyfont[mainface] \starttext \ss 123456789 Wild! \medskip \st

[NTG-context] Problem with float and new layout on same page

My MWE below produces this pdf. My problem is that on page 2, the body text flows beyond its frame and into the footer distance. Regards, Peter Play.pdf Description: Adobe PDF document MWE: \setuppapersize[A4][A3,landscape] \setuparranging[2SIDE] \showframe \definelayout[mypage

Re: [NTG-context] \typefile not including file and returning success

On Wed, 21 Dec 2022 13:17:15 +0100 Hans Hagen via ntg-context wrote: > > But context returning success when it clearly doesn't include the > > file is unfortunate. The missing file might go completely unnoticed. > > I'd expect an error there. > The next upload will have: > > \adddefaultsuffix[

Re: [NTG-context] \typefile not including file and returning success

On 12/17/2022 6:27 PM, Marco via ntg-context wrote: On Sat, 17 Dec 2022 17:43:48 +0100 Otared Kavian wrote: Thanks for your quick reply. It seems that one can fool ConTeXt into typing a file without suffix by giving the path to that file… That works, I can confirm. \typefile{/Users/kavian

Re: [NTG-context] \typefile not including file and returning success

On Sat, 17 Dec 2022 10:41:11 -0800 skyhorse--- via ntg-context wrote: > The context wiki says: > "When no file extension is specified the extension .tex is assumed." It's not on the page for typefile: https://wiki.contextgarden.net/Command/typefile And that surel

Re: [NTG-context] \typefile not including file and returning success

; bar > > > > # t.tex > > \starttext > > Foo > > \typefile{bar} > > \stoptext > > > > Then run > > > > context --errors='*' t.tex > > > > The text “bar” is not included in the PDF, only Foo is. The log file

Re: [NTG-context] \typefile not including file and returning success

On Sat, 17 Dec 2022 17:43:48 +0100 Otared Kavian wrote: Thanks for your quick reply. > It seems that one can fool ConTeXt into typing a file without suffix > by giving the path to that file… That works, I can confirm. > \typefile{/Users/kavian/Context/essais/mkiv/bar-bis} Hard-coded absolute

[NTG-context] Definestartstop, Narrower, and Blockquotej

=2in,right=1in] \startnarrower[left,right] \noindent}, after={\stopnarrower \blank[ExtractDistance] \indenting[next]}] %Now the following commands are available: \startExtract and \stopExtract \starttext The extract from Knuth \startExtract \input knuth \stopExtract

Re: [NTG-context] \typefile not including file and returning success

On Sat, 17 Dec 2022 16:25:01 +0100 Otared Kavian via ntg-context wrote: > If I create a file named « bar.txt » then > > \starttext > Nothing to say\dots > > \typefile{bar.txt} > > \stoptext > > gives the correct result. I can confirm that. > However ConTeXt seems to dislike \typefile{bar} w

Re: [NTG-context] \typefile not including file and returning success

*' t.tex > > The text “bar” is not included in the PDF, only Foo is. The log file > shows: > > verbatims > file 'bar' does not exist > > However, the file “bar” clearly does exist. Furthermore, context > exits with no error in the log file and

[NTG-context] \typefile not including file and returning success

> file 'bar' does not exist However, the file “bar” clearly does exist. Furthermore, context exits with no error in the log file and a successful exit value: context --errors='*' t.tex > /dev/null; echo $?

Re: [NTG-context] Project structure with nested subfolders and shared environments.

Pawel Urbanski via ntg-context schrieb am 16.12.2022 um 10:09: Hi, To address the first question: \usepath[{Metadata}] % Is the actual code - I put spaces for readability reasons, which was a bad idea. When I compile a document I switch to the SubSubFolder for the document file is in t

Re: [NTG-context] Project structure with nested subfolders and shared environments.

: Freitag, 16. Dezember 2022 11:01 An: mailing list for ConTeXt users Cc: Pawel Urbanski Betreff: Re: [NTG-context] Project structure with nested subfolders and shared environments. Thank you for responses. While the ability to sort of inherit setups would be very useful it looks like as of

Re: [NTG-context] Project structure with nested subfolders and shared environments.

Thank you for responses. While the ability to sort of inherit setups would be very useful it looks like as of time of posting this message in December 2022 it is not possible. As a workaround I will create a shead environment file and just bulk copy it to subfolders. In case when I'll ne

Re: [NTG-context] Project structure with nested subfolders and shared environments.

Am 16.12.22 um 10:09 schrieb Pawel Urbanski via ntg-context: When I compile a document I switch to the SubSubFolder for the document file is in there. In my experience this won’t work. ConTeXt searches from the current folder (you can configure search paths, but I gave up on that, and you’d

Re: [NTG-context] Project structure with nested subfolders and shared environments.

trag von Henning > Hraban Ramm via ntg-context > Gesendet: Freitag, 16. Dezember 2022 07:52 > An: Pawel Urbanski via ntg-context > Cc: Henning Hraban Ramm > Betreff: Re: [NTG-context] Project structure with nested subfolders and > shared environments. > > Am 15.12.22 um 22:5

Re: [NTG-context] Project structure with nested subfolders and shared environments.

> > > Hi, To address the first question: \usepath[{Metadata}] % Is the actual code - I put spaces for readability reasons, which was a bad idea. When I compile a document I switch to the SubSubFolder for the document file is in there. I will appriciate any further hints. Obvious htings are usual

Re: [NTG-context] Project structure with nested subfolders and shared environments.

Am 15.12.22 um 22:52 schrieb Pawel Urbanski via ntg-context: \usepath [{ Metadata }] Did you try without the spaces? I’d assume ConTeXt will look for a folder " Metadata " and not "Metadata". If this is just a template variable, you didn’t tell us about templating. And

[NTG-context] Project structure with nested subfolders and shared environments.

Dear Everyone, I'm setting up a project structure that will possibly let me share styles and layouts with lots of documents I need to create weekly. Unfortunately my definitions in the environment file or files are ignored... Here is the setup under the purposely created structure: ** The f

Re: [NTG-context] Radial and linear gradients

Inkscape, so users won't even know. It is, however, a minor duplication to have two programs that can convert SVG to PDF. (And Inkscape will bloat the container size.) For my images, at least, gradients are one of the last features needed to render them correctly using MetaPost. The other is

Re: [NTG-context] Radial and linear gradients

er, a minor duplication to have two programs that can convert SVG to PDF. (And Inkscape will bloat the container size.) For my images, at least, gradients are one of the last features needed to render them correctly using MetaPost. The other is font rendering in some cases will be incorrect (e.g., try

Re: [NTG-context] Radial and linear gradients

\starttext \placefigure{}{\includesvgbuffer[csvg][conversion=mp]} \stoptext % EOF See attached a comparison of the PDF generated using ConTeXt and the PNG file generated by exporting from Inkscape. these gradients definitions get crazier by the day ... does inkscape output a bitmap or vector

[NTG-context] Radial and linear gradients

on=mp]} \stoptext % EOF See attached a comparison of the PDF generated using ConTeXt and the PNG file generated by exporting from Inkscape. Many thanks! gradient.pdf Description: Adobe PDF document ___ If your quest

Re: [NTG-context] \jobname and \doifelse

On 11/6/22 11:21, Hans Hagen via ntg-context wrote: > [...] > More relevan tis that you'r on TeX where catcodes matter > (here letter vs other) > >\doifelse{\inputfilebarename}{oeps} > {yes}{no} > >\doifelse{\detokenize\expandafter{\jobname}}{\detokenize{oeps}} > {yes}{no} Many

Re: [NTG-context] \jobname and \doifelse

On 11/5/22 16:55, Wolfgang Schuster via ntg-context wrote: > Pablo Rodriguez via ntg-context schrieb am 05.11.2022 um 16:30: >> >>\doifelse{\jobname}{a} >> {yes}{no} >> >> I get "no" as in TeX and "yes" with Lua, being "a.tex"

Re: [NTG-context] \jobname and \doifelse

t;yes") else context("no") end \stopluacode \stoptext I get "no" as in TeX and "yes" with Lua, being "a.tex" the source file. The TeX conditional used to work before. Am I missing something or have I hit a bug? I’m on Linux64 (if this may be r

Re: [NTG-context] \jobname and \doifelse

t;yes") else context("no") end \stopluacode \stoptext I get "no" as in TeX and "yes" with Lua, being "a.tex" the source file. The TeX conditional used to work before. Am I missing something or have I hit a bug? Are you sure the check worke

[NTG-context] \jobname and \doifelse

Dear list, using current latest (2022.10.22 11:23), I have the following sample: \starttext \doifelse{\jobname}{a} {yes}{no} \jobname \startluacode if tex.jobname == "a" then context("yes") else context("no") end \stopluacode \stop

Re: [NTG-context] context --autopdf and --showdirectives

Am 01.11.22 um 23:22 schrieb Hans Hagen via ntg-context:  > * How can I configure the command for --autopdf ? (Something in texmfcnf.lua?) you can try to set it in the cnf: -- ["pdfview.method"]   = "sumatra", Oops, I didn’t see that line. But I can’t set it to "open" or

Re: [NTG-context] context --autopdf and --showdirectives

On 10/31/2022 11:01 PM, Henning Hraban Ramm via ntg-context wrote: I’d like to configure the default behaviour of "context --autopdf"; since on my Mac I must always write "--autopdf=auto", otherwise context tries to call wine "sumatrapdf.exe" -reuse-instance -bg-color 0xCC instead of e.g.

[NTG-context] context --autopdf and --showdirectives

I’d like to configure the default behaviour of "context --autopdf"; since on my Mac I must always write "--autopdf=auto", otherwise context tries to call wine "sumatrapdf.exe" -reuse-instance -bg-color 0xCC instead of e.g. "open". There’s a hint about "directives_pdfview_method", so I wan

Re: [NTG-context] debugging lmtx and firefox (was: TeXGyre Heros on Firefox)

n here. > > > > https://bugzilla.mozilla.org/show_bug.cgi?id=1781022 > > Hi juh, > > this should have been fixed in current latest. So I think it may be safe > to close the issue. > > Sorry, but I cannot access to my Mozilla account temporarily (and I > think you may close your

Re: [NTG-context] debugging lmtx and firefox (was: TeXGyre Heros on Firefox)

think it may be safe to close the issue. Sorry, but I cannot access to my Mozilla account temporarily (and I think you may close your issue without having to ask administrators). Many thanks for your help, Pablo ___ If y

Re: [NTG-context] \quotation, protrusion and linebreaking

Alan Braslau schrieb am 13.10.2022 um 00:43: On 12/10/22 12/10/22, 14:25, Wolfgang Schuster via ntg-context wrote: Denis Maier via ntg-context schrieb am 12.10.2022 um 21:17: Instead of what? By default the symbols are placed with a box because you aren't limited to normal quotation marks. \

Re: [NTG-context] \quotation, protrusion and linebreaking

On 12/10/22 12/10/22, 14:25, Wolfgang Schuster via ntg-context wrote: Denis Maier via ntg-context schrieb am 12.10.2022 um 21:17: Instead of what? By default the symbols are placed with a box because you aren't limited to normal quotation marks. \setupexternalfigure [location=default] \setup

Re: [NTG-context] \quotation, protrusion and linebreaking

Denis Maier via ntg-context schrieb am 12.10.2022 um 21:17: Instead of what? By default the symbols are placed with a box because you aren't limited to normal quotation marks. \setupexternalfigure [location=default] \setupdelimitedtext   [quotation]   [ left={\externalfigure[cow][height=\stru

Re: [NTG-context] \quotation, protrusion and linebreaking

On 2022-10-11 15:06, Leah Neukirchen via ntg-context wrote: Henning Hraban Ramm via ntg-context writes: Am 11.10.22 um 20:00 schrieb Leah Neukirchen via ntg-context: Hello, I noticed the following problem: \showframe \startluacode fonts.protrusions.vectors.pure[0x201C] = { 1, 1 } \stoplu

Re: [NTG-context] \quotation, protrusion and linebreaking

> -Ursprüngliche Nachricht- > Von: ntg-context Im Auftrag von Hans Hagen > via ntg-context > Gesendet: Mittwoch, 12. Oktober 2022 21:12 > An: Denis Maier via ntg-context > Cc: Hans Hagen > Betreff: Re: [NTG-context] \quotation, protrusion and linebreaking >

Re: [NTG-context] \quotation, protrusion and linebreaking

, protrusion and linebreaking Am 11.10.22 um 21:06 schrieb Leah Neukirchen: Henning Hraban Ramm via ntg-context writes: \setupdelimitedtext[quotation][method=font] Just a quick request for clarification: What does that actually do? uses glyph in font instead (most opentype have them

Re: [NTG-context] \quotation, protrusion and linebreaking

> -Ursprüngliche Nachricht- > Von: ntg-context Im Auftrag von Henning > Hraban Ramm via ntg-context > Gesendet: Mittwoch, 12. Oktober 2022 10:15 > An: ntg-context@ntg.nl > Cc: Henning Hraban Ramm > Betreff: Re: [NTG-context] \quotation, protrusion and linebreaking &

Re: [NTG-context] \quotation, protrusion and linebreaking

Wolfgang, probably) told me at one time, or I picked it up from a discussion on the list, and it’s part of my default setup since. Hraban ___ If your question is of interest to others as well, please add an entry to

Re: [NTG-context] \quotation, protrusion and linebreaking

Henning Hraban Ramm via ntg-context writes: > Am 11.10.22 um 20:00 schrieb Leah Neukirchen via ntg-context: >> Hello, >> I noticed the following problem: >> \showframe >> \startluacode >>fonts.protrusions.vectors.pure[0x201C] = { 1, 1 } >> \stopluacode >> \definefontfeature[default][default][

Re: [NTG-context] \quotation, protrusion and linebreaking

Am 11.10.22 um 20:00 schrieb Leah Neukirchen via ntg-context: Hello, I noticed the following problem: \showframe \startluacode fonts.protrusions.vectors.pure[0x201C] = { 1, 1 } \stopluacode \definefontfeature[default][default][protrusion=pure] \setupalign[hanging] \starttext This text i

[NTG-context] \quotation, protrusion and linebreaking

Hello, I noticed the following problem: \showframe \startluacode fonts.protrusions.vectors.pure[0x201C] = { 1, 1 } \stopluacode \definefontfeature[default][default][protrusion=pure] \setupalign[hanging] \starttext This text is unquoted. “This text is quoted manually.” \quotation{This tex

Re: [NTG-context] TOC colors and in-page anchors

h links here: > > \setupinteraction[state=start, > color=darkred, > contrastcolor=darkred, > focus=standard] > \starttext > \completecontent > \section[a]{b} > \about[a] > \stoptext > > And this is a regression. I think it was introduced in

Re: [NTG-context] Missing letters and numbers in printout

On 9/29/22 15:54, Angel M Alganza via ntg-context wrote: > On Wed, Sep 28, 2022 at 03:59:07PM +0200, Hans Hagen via ntg-context wrote: > [...] >> but lmtx is and will stay as default > > Too bad the default won't work as expected (it did before or, at least > with TeXLiv

Re: [NTG-context] Missing letters and numbers in printout

publising it if it was possible.  I don't know if it has finally been removed or not, but I can't find it anywhere. openbsd is tricky in the sense that ervery update means that we need to install a new vm what you can try is to download the installation from git (contextgarden) and th

Re: [NTG-context] Missing letters and numbers in printout

On Wed, Sep 28, 2022 at 03:59:07PM +0200, Hans Hagen via ntg-context wrote: changed to have 'context file.txt' to compile using luatex instead of LuaMetaTeX? top line: % engine=luatex Thank you, I'll add that to my source files from now on. but lmtx is and will stay as d

Re: [NTG-context] TOC colors and in-page anchors

mpare both links here: \setupinteraction[state=start, color=darkred, contrastcolor=darkred, focus=standard] \starttext \completecontent \section[a]{b} \about[a] \stoptext And this is a regression. I think it was introduced in latest from 2022.07.06 21:42, since latest from

Re: [NTG-context] Missing letters and numbers in printout

On 9/28/2022 5:10 PM, Pablo Rodriguez via ntg-context wrote: Well, that is probably too much to say (I mean, that "--luatex" generates more accurate PDF documents). depends on how one defines accurate The main issue would be pretending to use with LuaTeX some features available only in LuaMe

Re: [NTG-context] Missing letters and numbers in printout

ces to produce a > complete product, shouldn't it be convenient for this option to be the > default? Well, that is probably too much to say (I mean, that "--luatex" generates more accurate PDF documents). What you are experiencing might be a pretty extreme case. And you are takin

Re: [NTG-context] Missing letters and numbers in printout

On 9/28/2022 3:30 PM, Angel M Alganza via ntg-context wrote: On Tue, Sep 27, 2022 at 04:03:06PM +0200, Pablo Rodriguez via ntg-context wrote: In that case, run "context --luatex --generate" first and then "context --luatex a6lua.tex". This would give you a pure LuaTeX-c

Re: [NTG-context] Missing letters and numbers in printout

On Tue, Sep 27, 2022 at 04:03:06PM +0200, Pablo Rodriguez via ntg-context wrote: In that case, run "context --luatex --generate" first and then "context --luatex a6lua.tex". This would give you a pure LuaTeX-compiled PDF document. I think that this PDF document will be fi

Re: [NTG-context] TOC colors and in-page anchors

\section{s3}\ipsum \section{s4}\ipsum \section{s5}\ipsum \section{s6}\ipsum \stoptext context version: 2022.09.11 20:44 The viewer is on 'Continuous Scoll' mode both before and after the click, but clicking s4 still jumps to the beginning of page 2. On Wed, 28 Sept 2022 at 16

Re: [NTG-context] TOC colors and in-page anchors

tion{s3}\ipsum > \section{s4}\ipsum > \section{s5}\ipsum > \section{s6}\ipsum > \stoptext > > In the table of contents, s1 and s2 (at page 1) are rendered in red, while > others in green. > > Moreover, when I click s4, it jumps to page 2 without locatin

[NTG-context] TOC colors and in-page anchors

Dear list, \usemodule[ipsum] \setupinteraction[state=start] \starttext \completecontent \section{s1}\ipsum \section{s2}\ipsum \section{s3}\ipsum \section{s4}\ipsum \section{s5}\ipsum \section{s6}\ipsum \stoptext In the table of contents, s1 and s2 (at

Re: [NTG-context] Missing letters and numbers in printout

On Tue, Sep 27, 2022 at 04:03:06PM +0200, Pablo Rodriguez via ntg-context wrote: Producer: LuaMetaTeX-2.09 No, this was compiled with LuaMetaTeX. It looks so obvious now, but it didn't (to me) before. :-) In that case, run "context --luatex --generate" first an

Re: [NTG-context] Missing letters and numbers in printout

On 9/26/22 23:04, Angel M Alganza via ntg-context wrote: > On Mon, Sep 26, 2022 at 10:44:55PM +0200, Hans Hagen via ntg-context wrote: > >> mtxrun --script pdf --info oeps.pdf > [...] > mtx-pdf | creation date > D:20220920071929+02'00' > mtx-pdf | modification date > D:202209200

Re: [NTG-context] Missing letters and numbers in printout

king "context source.tex", use "context --luatex >> source.tex". > > When I try that I get: > > $ context --luatex a6lua.tex > [...] > mtxrun | unknown script 'mtx-context.lua' or 'mtx-mtx-context.lua' In that case, run "cont

Re: [NTG-context] Missing letters and numbers in printout

On 9/26/2022 11:04 PM, Angel M Alganza via ntg-context wrote: On Mon, Sep 26, 2022 at 10:44:55PM +0200, Hans Hagen via ntg-context wrote: mtxrun --script pdf --info oeps.pdf $ mtxrun --script pdf --info a6.pdf mtx-pdf | filename  > a6.pdf mtx-pdf | pdf version   >

Re: [NTG-context] Missing letters and numbers in printout

On 9/26/2022 8:26 PM, Angel M Alganza via ntg-context wrote: I didn't know any of the poppler-utils, thank you! Otherwise, the only option about your documents is guessing. mtxrun --script pdf --info oeps.pdf mtxrun --script pdf --fonts oeps.pdf the second one also shows what characters are

Re: [NTG-context] Missing letters and numbers in printout

On Mon, Sep 26, 2022 at 10:44:55PM +0200, Hans Hagen via ntg-context wrote: mtxrun --script pdf --info oeps.pdf $ mtxrun --script pdf --info a6.pdf mtx-pdf | filename > a6.pdf mtx-pdf | pdf version > 1.7 mtx-pdf | major version > 1 mtx-pdf | m

Re: [NTG-context] Missing letters and numbers in printout

On 9/26/2022 8:26 PM, Angel M Alganza via ntg-context wrote: I didn't know any of the poppler-utils, thank you! mtxrun --script pdf --info oeps.pdf mtxrun --script pdf --fonts oeps.pdf the second one also shows what characters are in there Hans -

Re: [NTG-context] Missing letters and numbers in printout

cted mtxrun | unknown script 'mtx-context.lua' or 'mtx-mtx-context.lua' But the way to know for sure which tools generated your PDF document and whether fonts are embedded, "pdfinfo your-file.pdf" and "pdffonts your-file.pdf" are your friends. I

Re: [NTG-context] Missing letters and numbers in printout

On 9/26/22 16:06, Angel M Alganza via ntg-context wrote: > Hello, Hi Ángel, > [...] > I tried printing the same file (from the same USB drive) into a > different printer, this time connected to a computer, and sending the > file from it, which worked just fine. My guess is

<    1   2   3   4   5   6   7   8   9   10   >