On Jan 5, 2013, at 4:24 PM, Silvio Siefke siefke_lis...@web.de wrote:
What should me say this two words? You not use nano, ok. Editors enough
on earth. Or you not write manually? Then share the way! Or use a CMS?
Silvio:
You said --
1.) All websites are created manually. (nano + html/css
Hello,
On Sun, 6 Jan 2013 11:36:39 -0500
Tedd Sperling t...@sperling.com wrote:
You said --
1.) All websites are created manually. (nano + html/css Tags)
-- and I replied Not mine. In other words, some of my web-sites are
NOT created manually.
What do you mean I do realize. I'm just
On Jan 6, 2013, at 12:52 PM, Silvio Siefke siefke_lis...@web.de wrote:
On Sun, 6 Jan 2013 11:36:39 -0500
Tedd Sperling t...@sperling.com wrote:
So, where does that leave a Web Developer? It leaves them with the
responsibility to learn and apply what they learned to their craft.
Is there an
On 6 Jan 2013, at 18:42, Tedd Sperling t...@sperling.com wrote:
I also realize there is a language problem here -- while I cannot speak your
language, what you say in mine and my replies, may be misinterpreted -- but
in any case, no offense was meant.
Indeed. I'm guessing that when Silvio
Hello,
On Sat, 05 Jan 2013 07:53:04 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
I'm not sure quite what you'd expect such a module to do? Is this for
templating?
page2 creates complete websites. Would be useful because I'm sitting
at the website internationalization. Template
On Sat, 2013-01-05 at 15:23 +0100, Silvio Siefke wrote:
Hello,
On Sat, 05 Jan 2013 07:53:04 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
I'm not sure quite what you'd expect such a module to do? Is this for
templating?
page2 creates complete websites. Would be useful
On Sat, Jan 5, 2013 at 8:52 AM, Ashley Sheridan a...@ashleysheridan.co.uk
wrote
On Sat, 2013-01-05 at 15:23 +0100, Silvio Siefke wrote:
On Sat, 05 Jan 2013 07:53:04 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
I'm not sure quite what you'd expect such a module to do? Is this for
Hello,
On Sat, 05 Jan 2013 14:52:12 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
I've just had a quick look at page2, and I can't say I see the point.
You'd end up having to write a lot more code that was harder to manage
by adding each element through a class like that if your site
Silvio Siefke siefke_lis...@web.de wrote:
Hello,
On Sat, 05 Jan 2013 14:52:12 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
I've just had a quick look at page2, and I can't say I see the point.
You'd end up having to write a lot more code that was harder to
manage
by adding each
Hello,
On Sat, 05 Jan 2013 17:21:05 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
If the pages are already written, why do you want to start changing
the way they've been built?
1.) All websites are created manually. (nano + html/css Tags)
2.) The maintenance effort now is not
Silvio Siefke siefke_lis...@web.de wrote:
Hello,
On Sat, 05 Jan 2013 17:21:05 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
If the pages are already written, why do you want to start changing
the way they've been built?
1.) All websites are created manually. (nano + html/css
On Jan 5, 2013, at 3:11 PM, Silvio Siefke siefke_lis...@web.de wrote:
On Sat, 05 Jan 2013 17:21:05 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
If the pages are already written, why do you want to start changing
the way they've been built?
1.) All websites are created manually.
Hello,
On Sat, 05 Jan 2013 20:36:12 +
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
What I would start to do is break out common parts of pages to include
files. This would be stuff like headers, footers, sidebars, etc.
From there, you could use variables to set things like titles,
Hallo,
On Sat, 5 Jan 2013 15:40:56 -0500
Tedd Sperling t...@sperling.com wrote:
Not mine.
What should me say this two words? You not use nano, ok. Editors enough
on earth. Or you not write manually? Then share the way! Or use a CMS?
Thank you for help, Kind Regards
Silvio
--
PHP General
On Sat, 2013-01-05 at 22:24 +0100, Silvio Siefke wrote:
Hallo,
On Sat, 5 Jan 2013 15:40:56 -0500
Tedd Sperling t...@sperling.com wrote:
Not mine.
What should me say this two words? You not use nano, ok. Editors enough
on earth. Or you not write manually? Then share the way! Or use
Hello,
Is there something similar to Pear/Page2 module, that can working with HTML5?
Thanks for help, Greetings
Silvio
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
On Fri, Jan 4, 2013 at 8:18 PM, Silvio Siefke siefke_lis...@web.de wrote:
Is there something similar to Pear/Page2 module, that can working with HTML5?
Would phptal be of use? http://phptal.org/
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit:
On Fri, 2013-01-04 at 20:44 -0600, tamouse mailing lists wrote:
On Fri, Jan 4, 2013 at 8:18 PM, Silvio Siefke siefke_lis...@web.de wrote:
Is there something similar to Pear/Page2 module, that can working with
HTML5?
Would phptal be of use? http://phptal.org/
I'm not sure quite what
On Thu, Nov 15, 2012 at 9:52 AM, Rick Dwyer rpdw...@earthlink.net wrote:
Same result… which is to say no error returned even for messages sent with no
email in the to address field.
Okay, that is odd. If I try it with a blank I get a failure saying
that it has a bad address. See:
On Nov 14, 2012, at 10:48 PM, tamouse mailing lists tamouse.li...@gmail.com
wrote:
On Wed, Nov 14, 2012 at 7:19 PM, Rick Dwyer rpdw...@earthlink.net wrote:
Hello all.
I have some Pear Mail code composing an email and sending it to an external
smtp server for sending.
The issue is
Hello all.
I have some Pear Mail code composing an email and sending it to an external
smtp server for sending.
The issue is determining whether that external server actually accepted the
mail or not. In the IF(PEAR… code below, it will return success even if I
leave the $to value empty.
On Wed, Nov 14, 2012 at 7:19 PM, Rick Dwyer rpdw...@earthlink.net wrote:
Hello all.
I have some Pear Mail code composing an email and sending it to an external
smtp server for sending.
The issue is determining whether that external server actually accepted the
mail or not. In the
Hello.
I am trying to use pear Auth packet but am doing something wrong.
I am currently looking at the simple example in the documentation, but
something is wrong in my source code, because if I write a username
and a password in the fields and hit the submit button, I receive a
blank pages
Hello.
I am trying to use pear Auth packet but am doing something wrong.
I am currently looking at the simple example in the documentation, but
something is wrong in my source code, because if I write a username
and a password in the fields and hit the submit button, I receive a
blank pages
Running PHP 5.3.6 Windows VC9 zipped binaries (windows.php.net).
I got the following messages after running 'pear' in the command line:
PHP Parser error: syntax error, unepxected '@' in
C:\php\PEAR\pearcmd.php on line 28
PHP Parser error: syntax error, unepxected '@' in
C:\php\PEAR\pearcmd.php
A client has:
PHP 5.3 on Win7x64 running a local web app that needs to send mail. (This app
was once hosted on a linux-based hosted space.) Apache 2.2 is installed but
apparently not being used. I think the IIS service is actually the web server
that is engaged.
During troubleshooting a wide
On 7/8/2011 9:50 AM, Brian Smither wrote:
A client has:
PHP 5.3 on Win7x64 running a local web app that needs to send mail.
(This app was once hosted on a linux-based hosted space.) Apache 2.2
is installed but apparently not being used. I think the IIS service
is actually the web server
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01/30/2011 05:43 AM, Ethan Rosenberg wrote:
Dear list -
I enter the command pear list, and get errors. See below --
ethan@rosenberg:/usr/lib/php5$ ls -l
total 12
drwxr-xr-x 2 root root 4096 Jan 6 00:53 20090626+lfs
drwxr-xr-x 2 root
At 03:29 AM 1/30/2011, Thijs Lensselink wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01/30/2011 05:43 AM, Ethan Rosenberg wrote:
Dear list -
I enter the command pear list, and get errors. See below --
ethan@rosenberg:/usr/lib/php5$ ls -l
total 12
drwxr-xr-x 2 root root 4096
Ethan Rosenberg eth...@earthlink.net wrote:
At 03:29 AM 1/30/2011, Thijs Lensselink wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01/30/2011 05:43 AM, Ethan Rosenberg wrote:
Dear list -
I enter the command pear list, and get errors. See below --
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
Ethan Rosenberg eth...@earthlink.net wrote:
At 03:29 AM 1/30/2011, Thijs Lensselink wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01/30/2011 05:43 AM, Ethan Rosenberg wrote:
Dear list -
I enter the command pear list, and get
At 01:51 PM 1/30/2011, Ashley Sheridan wrote:
Ashley Sheridan a...@ashleysheridan.co.uk wrote:
Ethan Rosenberg eth...@earthlink.net wrote:
At 03:29 AM 1/30/2011, Thijs Lensselink wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01/30/2011 05:43 AM, Ethan Rosenberg wrote:
Dear list -
On 1/30/2011 2:34 PM, Ethan Rosenberg wrote:
I make more mistakes reading emails than you do!!
Would you [or anyone else on this list] please help me with my questions
1] How do I install it? [msql NOT mysql] apt-get install does not find
the package.
http://www.google.com
Enter your
Dear list -
I enter the command pear list, and get errors. See below --
ethan@rosenberg:/usr/lib/php5$ ls -l
total 12
drwxr-xr-x 2 root root 4096 Jan 6 00:53 20090626+lfs
drwxr-xr-x 2 root root 4096 Jul 18 2010 libexec
-rwxr-xr-x 1 root root 596 Jan 5 08:09 maxlifetime
On Fri, Jan 28, 2011 at 00:33, Ethan Rosenberg eth...@earthlink.net wrote:
Please take a look at php.ini in the vicinity of line 510. You will see the
construct to which I refer. Can you explain what is going on? I do not
think it is a problem with commenting out a line.
Any ideas from
At 01:54 AM 1/27/2011, Adam Richardson wrote:
On Thu, Jan 27, 2011 at 1:01 AM, Ethan Rosenberg eth...@earthlink.netwrote:
Dear List -
I am executing the command pear list.
This is what I get -
ethan@rosenberg:/usr/bin$ pear list
PHP: syntax error, unexpected '' in /etc/php5/cli/php.ini
Dear List -
I am executing the command pear list.
This is what I get -
ethan@rosenberg:/usr/bin$ pear list
PHP: syntax error, unexpected '' in /etc/php5/cli/php.ini on line 510
Installed packages, channel pear.php.net:
=
Package Version State
On Thu, Jan 27, 2011 at 1:01 AM, Ethan Rosenberg eth...@earthlink.netwrote:
Dear List -
I am executing the command pear list.
This is what I get -
ethan@rosenberg:/usr/bin$ pear list
PHP: syntax error, unexpected '' in /etc/php5/cli/php.ini on line 510
Installed packages, channel
. As there is no
package called pear, it finds nothing.
Instead, you can use:
yum install php-pear*
to install all the php-pear packages, or install them as you need by:
yum install php-pear-subpackage
Thanks,
Ash
http://www.ashleysheridan.co.uk
use:
yum install php-pear*
to install all the php-pear packages, or install them as you need by:
yum install php-pear-subpackage
Thanks,
Ash
http://www.ashleysheridan.co.uk
Dear Ash,
1, Thank for your technical support of the installation / update
operation
2, If your is FC11
Ashley Sheridan wrote:
On Mon, 2010-03-08 at 22:39 +0800, Edward. S. P. Leong wrote:
Ashley Sheridan wrote:
On Mon, 2010-03-08 at 01:07 +0800, Edward. S. P. Leong wrote:
Dear All,
Which can we download pear ann install into fc 11 system ?
Thank for your help !
Edward.
I'm not
Ashley Sheridan wrote:
On Mon, 2010-03-08 at 01:07 +0800, Edward. S. P. Leong wrote:
Dear All,
Which can we download pear ann install into fc 11 system ?
Thank for your help !
Edward.
I'm not sure I understand your question. Do you mean what Pear
components can be installed on a
On Mon, 2010-03-08 at 22:39 +0800, Edward. S. P. Leong wrote:
Ashley Sheridan wrote:
On Mon, 2010-03-08 at 01:07 +0800, Edward. S. P. Leong wrote:
Dear All,
Which can we download pear ann install into fc 11 system ?
Thank for your help !
Edward.
I'm not sure I
Dear All,
Which can we download pear ann install into fc 11 system ?
Thank for your help !
Edward.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
On Mon, 2010-03-08 at 01:07 +0800, Edward. S. P. Leong wrote:
Dear All,
Which can we download pear ann install into fc 11 system ?
Thank for your help !
Edward.
I'm not sure I understand your question. Do you mean what Pear
components can be installed on a Fedora 11 system? I'm
A few days ago I upgraded my development server with PHP 5.3, and
found that some pear packages stopped working giving FATAL ERRORs,
like this (this one is from package Image_Graph):
PHP Fatal error: Call to undefined method
Image_Graph_Plotarea_Element::Image_Graph_Element() in
Martín Marqués wrote:
A few days ago I upgraded my development server with PHP 5.3, and
found that some pear packages stopped working giving FATAL ERRORs,
like this (this one is from package Image_Graph):
PHP Fatal error: Call to undefined method
Michael A. Peters wrote:
Martín Marqués wrote:
A few days ago I upgraded my development server with PHP 5.3, and
found that some pear packages stopped working giving FATAL ERRORs,
like this (this one is from package Image_Graph):
PHP Fatal error: Call to undefined method
I've got script that uses the pear Mail class and have had problems on some
shared hosts with the include path to Mail. E.g., Blue Host insists the site
owner must change the php.ini file. I'd rather not expect them to do that.
Can you folks critique this approach for me.
Al wrote:
I've got script that uses the pear Mail class and have had problems on
some shared hosts with the include path to Mail. E.g., Blue Host insists
the site owner must change the php.ini file. I'd rather not expect them
to do that.
Can you folks critique this approach for me.
Jim Lucas wrote:
Al wrote:
I've got script that uses the pear Mail class and have had problems on
some shared hosts with the include path to Mail. E.g., Blue Host insists
the site owner must change the php.ini file. I'd rather not expect them
to do that.
Can you folks critique this approach
Typing 'pear segmentation fault' in Google produces tons of
responses so I know I'm not the only one with this issue, but I'll be
damned if I can figure out what the problem is and how to fix it. I
rolled my own PHP 5.3.0 from source. Compilation went fine, no errors.
Installation went
Typing 'pear segmentation fault' in Google produces tons of
responses so I know I'm not the only one with this issue, but I'll be
damned if I can figure out what the problem is and how to fix it. I
rolled my own PHP 5.3.0 from source. Compilation went fine, no
errors. Installation
Thodoris wrote:
Was, by any chance, PHP installed as binary before you install it from
source?
If this is the case try uninstalling the binary and then configure and
compile the source again running 'make clean' before.
PHP was not installed at all on this machine. I grabbed the source
Thodoris wrote:
Was, by any chance, PHP installed as binary before you install it
from source?
If this is the case try uninstalling the binary and then configure
and compile the source again running 'make clean' before.
PHP was not installed at all on this machine. I grabbed the source
Thodoris wrote:
Is there a good reason for needing this pear package?
http://pear.php.net/package/DB
It is old and it has been replaced with MDB2 some time ago. Why don't
you use it instead of trying to install DB.
The issue here isn't what package is being installed. The issue is
that
Thodoris wrote:
Is there a good reason for needing this pear package?
http://pear.php.net/package/DB
It is old and it has been replaced with MDB2 some time ago. Why don't
you use it instead of trying to install DB.
The issue here isn't what package is being installed. The issue is
that
Thodoris wrote:
Obviously something went wrong while installing PHP and you will have
to find this because this probably the reason pear segfaults.
Did you run make test before installing? (makes sure everything went
well)
You know you don't need pear binary to use a pear's package right?
On Mon, Oct 19, 2009 at 1:28 PM, Ashley M. Kirchner ash...@pcraft.com wrote:
Thodoris wrote:
Obviously something went wrong while installing PHP and you will have to
find this because this probably the reason pear segfaults.
Did you run make test before installing? (makes sure everything
On Mon, Oct 19, 2009 at 1:35 PM, Ashley M. Kirchner ash...@pcraft.com wrote:
Eddie Drapkin wrote:
Have you tried running pear upgrade pear?
Yep, but I'll do it again for you to see:
pear -vvv upgrade pear
Warning: file_exists(): Unable to find the wrapper channel -
Eddie Drapkin wrote:
Try rebuilding PEAR manually.
No dice. Same segfault. Bunch of deprecated warnings too ...
[ ... snip ... ]
Installing selected packages..
PHP Deprecated: Assigning the return value of new by reference is
deprecated in
O/H Ashley M. Kirchner έγραψε:
Eddie Drapkin wrote:
Try rebuilding PEAR manually.
No dice. Same segfault. Bunch of deprecated warnings too ...
[ ... snip ... ]
Installing selected packages..
PHP Deprecated: Assigning the return value of new by reference is
deprecated
Eddie Drapkin wrote:
Have you tried running pear upgrade pear?
Yep, but I'll do it again for you to see:
pear -vvv upgrade pear
Warning: file_exists(): Unable to find the wrapper channel - did you
forget to enable it when you configured PHP? in
Ok, we have activity here. Before deleting everything and
re-installing, I decided to just rename my php.ini file. Low and
behold, pear works now. So, now the next task is figuring out where and
why does php.ini cause pear to bomb.
--
H | It's not a bug - it's an undocumented feature.
Thodoris wrote:
Manually is the best solution as far as I can tell:
http://pear.php.net/manual/en/installation.getting.php
That's exactly what I did. I grabbed http://pear.php.net/go-pear
and saved it, then ran php go-pear.php. The result is what you saw in
my previous e-mail.
--
H |
Well, it boiled down to zlib.so causing the segfault. As soon as I
removed that module, everything worked. Recompiling just the zlib.so
module yielded the same result: pear segfaults.
So now the question is: is it zlib's fault, or is it pear?
At this point I've accomplished what
Ashley M. Kirchner wrote:
Well, it boiled down to zlib.so causing the segfault. As soon as I
removed that module, everything worked. Recompiling just the zlib.so
module yielded the same result: pear segfaults.
So now the question is: is it zlib's fault, or is it pear?
At this
Thodoris wrote:
I've used it for some time but never needed to lock a cell. Here is a
piece of code that shows how to apply a format to a cell:
Hope it helps. I think that by doing something like this:
$format_bold-setLocked();
while creating the format could do the trick but it is not
Hey all,
Any one use the PEAR Spreadsheet_Excel_Writer package?
I need to know how to implement the setLocked method to lock out a
cell, but can't figure out how this would be done.
Do you add it as a format? But then how is it applied to a cell. It's
not documented on the PEAR pages.
Thodoris wrote:
I've used it for some time but never needed to lock a cell. Here is a
piece of code that shows how to apply a format to a cell:
Hope it helps. I think that by doing something like this:
$format_bold-setLocked();
while creating the format could do the trick but it is not
Hey all,
Any one use the PEAR Spreadsheet_Excel_Writer package?
I need to know how to implement the setLocked method to lock
out a cell, but can't figure out how this would be done.
Do you add it as a format? But then how is it applied to a
cell. It's not documented on the PEAR pages.
Any
[snip]
I need it to error when an attempt to create a record without setting that
field is attempted, but setting the field to an empty string is fine.
Attempting to insert data without defining that field indicates there is
not sufficient information to create a record. Setting that field to
On Apr 11, 2009, at 21:38, Michael A. Peters mpet...@mac.com wrote:
I've run into a small issue with mdb2.
I have a mysql database with a field set to longtext not null.
inserting into that field works just dandy when using the mysql_
functions.
However, when using mdb2 - it converts
Phpster wrote:
On Apr 11, 2009, at 21:38, Michael A. Peters mpet...@mac.com wrote:
I've run into a small issue with mdb2.
I have a mysql database with a field set to longtext not null.
inserting into that field works just dandy when using the mysql_
functions.
However, when using mdb2
Michael A. Peters wrote:
Phpster wrote:
On Apr 11, 2009, at 21:38, Michael A. Peters mpet...@mac.com wrote:
I've run into a small issue with mdb2.
I have a mysql database with a field set to longtext not null.
inserting into that field works just dandy when using the mysql_
functions.
I've run into a small issue with mdb2.
I have a mysql database with a field set to longtext not null.
inserting into that field works just dandy when using the mysql_
functions.
However, when using mdb2 - it converts to NULL which is NOT what I
want to have happen, and the result is that
Might it be the Unix newline characters?
Unlikely, IIRC the PEAR mime stuff uses \r\n (ie Windows). Try using
the htmlMimeMail5 code here:
http://www.phpguru.org/downloads/html.mime.mail/htmlMimeMail5/
--
Richard Heyes
HTML5 Graphing for FF, Chrome, Opera and Safari:
http://www.rgraph.org
Hi All,
Can someone think of a reason why when changing from a Windows 2003 Web
Edition server running PHP 5.2 to a Ubuntu machine, also with PHP 5.2 can
cause the following problem:
The emails sent from the server, which should be in HTML format (the client
wanted this specifically) now only
On Tue, Dec 9, 2008 at 6:57 AM, German Geek [EMAIL PROTECTED] wrote:
Hi All,
Can someone think of a reason why when changing from a Windows 2003 Web
Edition server running PHP 5.2 to a Ubuntu machine, also with PHP 5.2 can
cause the following problem:
The emails sent from the server, which
Hi All,
I installed PEAR fine.
How I need to install OLE and Spreadsheet_Excel_Writer and I dont see
how
pear install .
fails every time with channel errors and not found errors.
I have downloaded the .tgz files, but I dont know where to put the
contents.
Any thoughts?
-Jason
I found the PEAR tarballs to be corrupt a day or two ago...
The PEAR bug report captcha continually rejected my correct answers to simple
math questions. :-(
I snagged a re-packaged version from:
http://pizzaseo.com/
ymmv
--
PHP General Mailing List (http://www.php.net/)
To
The PEAR tarball for ExcelWriter is corrupt for 0.9.1, 0.9.0 and 0.8.0
The PEAR bug-reporting system CAPTHCA won't accept the correct answers.
In desparation, I'm reporting this here, hoping somebody from PEAR
reads this and can do something...
$ tar -xvf Spreadsheet_Excel_Writer-0.9.1.tar
Anyone have opinions on these two mail functions for sending smtp emails, pear mail() verses
net-smtp()? Which is best, etc.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Al wrote:
Anyone have opinions on these two mail functions for sending smtp
emails, pear mail() verses net-smtp()? Which is best, etc.
Pear mail puts everything together and if necessary uses net_smtp to
send it.
If you want to have to build the emails yourself, you can do it and then
use
Al wrote:
Anyone have opinions on these two mail functions for sending smtp
emails, pear mail() verses net-smtp()? Which is best, etc.
Pear mail puts everything together and if necessary uses net_smtp to
send it.
If you want to have to build the emails yourself, you can do it and then
use
Hi
I know nothing about Pear, so I don't know how to debug this:
I've got a newly installed Movable Type blog with a couple of entries in
it, and I just found from php.net the pear classes to parse an RSS feed,
parser.php and rss.php, and this code from the PEAR site works
require_once
Hi Folks,
I have just successfully lobbied for the company I work for to use
PHP/MySQL for our next website. My Question is regarding DB abstraction
. I know there is a Pear DB module, is this the best to use ? I have a
vague memory of reading somewhere that there is a newer lib or
On Thu, 2008-07-10 at 16:47 +1000, John Comerford wrote:
Hi Folks,
I have just successfully lobbied for the company I work for to use
PHP/MySQL for our next website. My Question is regarding DB abstraction
. I know there is a Pear DB module, is this the best to use ? I have a
vague
PEAR::DB was deprecated years ago. Do not use it.
PEAR::MDB2 is the preferred PEAR wrapper these days.
Personally, I skip them both and prefer to go straight to PDO, available in
PHP 5.
http://www.php.net/pdo
On Thursday 10 July 2008 1:47:34 am John Comerford wrote:
Hi Folks,
I have
Hi Folks,
I have just successfully lobbied for the company I work for to use
PHP/MySQL for our next website. My Question is regarding DB abstraction
. I know there is a Pear DB module, is this the best to use ? I have a
vague memory of reading somewhere that there is a newer lib or
John Comerford wrote:
Hi Folks,
I have just successfully lobbied for the company I work for to use
PHP/MySQL for our next website. My Question is regarding DB abstraction
. I know there is a Pear DB module, is this the best to use ? I have a
vague memory of reading somewhere that there is
SPM decided to move stuff to a different place, namely inside of a
/usr/share/php/PEAR directory, instead of just /usr/share/PEAR.
So change your include path and be done with it.
On Wed, March 5, 2008 11:59 am, Stephen wrote:
My LAMP is on Ubuntu 7.10
I am trying to use PEAR, for the first
You could just copy and paste from the PEAR website, And replicate the
directory structure manually. g
1. Create the dire /use/local/share/pear/HTML
2. Copy (or create) the file Quickform (and all it's associated stuff)
into that directory. IIRC, Quickform has quite a lot of files, so you
/roissy.ca/public_html/quotesForm.php on line 3
Now I have always just used the Synaptic Package Manager, and I just did
a reinstall of PEAR.
But there is no /usr/share/pear directory.
I have a /usr/share/php/PEAR and it has things that look like
installation files.
I am venturing where I have
/quotesForm.php on line 3
[snip!]
But there is no /usr/share/pear directory.
I have a /usr/share/php/PEAR and it has things that look like
installation files.
[snip!]
Can anyone help me figure out how to get the installation fixed?
Update your php.ini to add /usr/share/php/PEAR
/roissy.ca/public_html/quotesForm.php on line 3
[snip!]
But there is no /usr/share/pear directory.
I have a /usr/share/php/PEAR and it has things that look like
installation files.
[snip!]
Can anyone help me figure out how to get the installation fixed?
Update your php.ini to add /usr/share
[snip!]
But there is no /usr/share/pear directory.
I have a /usr/share/php/PEAR and it has things that look like
installation files.
[snip!]
Can anyone help me figure out how to get the installation fixed?
Update your php.ini to add /usr/share/php/PEAR to the include
Wolf wrote:
Open a terminal window on the server
at the prompt type:
locate QuickForm.php
If it comes back with the path/file, make sure the path to the file is in the
include folder
If it comes back to just a regular terminal prompt right away, then you need to
install it.
The following
Stephen wrote:
Wolf wrote:
Open a terminal window on the server
at the prompt type:
locate QuickForm.php
If it comes back with the path/file, make sure the path to the file is
in the include folder
If it comes back to just a regular terminal prompt right away, then
you need to install
Shawn McKenzie wrote:
sudo pear install HTML_QuickForm
That was so easy.
Thank you!
Stephen
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
1 - 100 of 444 matches
Mail list logo
