I know that I must be missing something really ridiculous, but when I
print_r these arrays they are empty. I have confirmed that $arrayElement
is properly formed, it just seems that array_push is not working. I know
I have done this before, but I cannot find my older code. Can someone
clear
Globals being used in a function.
-Stuart
On Tue, May 7, 2013 at 11:06 PM, Jay Blanchard
jay.blanch...@sigmaphinothing.org wrote:
I know that I must be missing something really ridiculous, but when I
print_r these arrays they are empty. I have confirmed that $arrayElement
is properly
On Tue, May 7, 2013 at 3:06 PM, Jay Blanchard
jay.blanch...@sigmaphinothing.org wrote:
I know that I must be missing something really ridiculous, but when I
print_r these arrays they are empty. I have confirmed that $arrayElement is
properly formed, it just seems that array_push is not working.
[snip]Globals being used in a function. [/snip]
*smacks forehead*
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
On Tue, May 7, 2013 at 4:28 PM, Jay Blanchard
jay.blanch...@sigmaphinothing.org wrote:
[snip]Globals being used in a function. [/snip]
*smacks forehead*
It bites me all the time, too.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
On Tue, May 7, 2013 at 9:42 PM, tamouse mailing lists
tamouse.li...@gmail.com wrote:
On Tue, May 7, 2013 at 4:28 PM, Jay Blanchard
jay.blanch...@sigmaphinothing.org wrote:
[snip]Globals being used in a function. [/snip]
*smacks forehead*
It bites me all the time, too.
(Might be worth a
hi,
I just started to write a simple PHP extension hello, but encountered
some problems. I followed tutorials step by step:
1. ./ext_skel --extname=hello
2. modified hello.c and php_hello.h, and wrote function hello_world() which
simply return a string hello world.
3. phpize
4. ./configure ; make
On Fri, Dec 16, 2011 at 10:09 PM, Francisco M. Marzoa Alonso
franci...@marzoa.com wrote:
I know it is NOT a problem with the website, because if I comment out
the line curl_setopt ($ch, CURLOPT_HTTPPROXYTUNNEL, 1) disabling the use
of a proxy, it works fine.
I know the proxy is working fine,
Hello,
The following code is failing and I do not find the cause (please, note
that checkurl value and CURLOPT_PROXY are NOT the real values I'm using,
of course):
$ch = curl_init();
$checkurl = 'http://mycheckhost.com/';
curl_setopt ($ch, CURLOPT_TIMEOUT, 6000);
Hello,
I'm developing a PHP application that runs on GNU/Linux with php cli. A
process must launch another one and store its pid, so I use proc_open
and then proc_status to achieve that.
The child process must also get its own pid and write it down to a file.
After that, the calling process
Hi,
I am having problems while trying to decrypt an encrypted string (generated
from a java system) in PHP.
To take external factors out of the way I decided to make them work first in
my local system.
So I've created a sample encrypt/decrypt from PHP (using mcrypt's extension)
and the java
Hi
I can`t open the pear set up executing the go-pear.bat file.
Alejandro
Hi.
The code I use to extract the data from a query which was just
performed looks like this:
$data = array();
$receiverRow = array();
$i = 0;
foreach ($columns as $column = $type)
$statement-bindColumn($i++,
On Sat, Dec 18, 2010 at 17:02, David Hutto smokefl...@gmail.com wrote:
or maybe it's saturday morning and i'm drunk?
This seems to be the most likely, and considering how all messages
are permanently and independently archived and propagate throughout
the Internet, it might be a good reason
On Mon, Dec 20, 2010 at 7:37 AM, Daniel Brown danbr...@php.net wrote:
On Sat, Dec 18, 2010 at 17:02, David Hutto smokefl...@gmail.com wrote:
or maybe it's saturday morning and i'm drunk?
This seems to be the most likely, and considering how all messages
are permanently and independently
On Fri, Dec 17, 2010 at 10:05 AM, la...@garfieldtech.com
la...@garfieldtech.com wrote:
What PHP has implemented is named break statements, as I understand it.
Not exactly. You can jump to arbitrary (labeled) lines within the same
context (method/function), but you cannot enter loop
On Mon, Dec 20, 2010 at 4:47 PM, David Harkness
davi...@highgearmedia.com wrote:
On Fri, Dec 17, 2010 at 10:05 AM, la...@garfieldtech.com
la...@garfieldtech.com wrote:
What PHP has implemented is named break statements, as I understand it.
Not exactly. You can jump to arbitrary (labeled)
On Mon, Dec 20, 2010 at 7:45 PM, David Hutto smokefl...@gmail.com wrote:
Is the problem with using the goto convolutedness(as I've seen other
senior programmers in other languages when explaining, or 'showing
off'), or is their an actual functional problem with it?
It works perfectly well
06:39 PM
To: php-db-lists.php.net; php-general@lists.php.net
Subject: [PHP] Problems w/ goto
Dear List -
I am sending this again since it does not seem to have posted.
Ethan
+++
Dear List -
Thank you with your excellent help in the past. Here is another puzzler
I am trying
Rosenberg [mailto:eth...@earthlink.net]
Sent: 17 December 2010 06:39 PM
To: php-db-lists.php.net; php-general@lists.php.net
Subject: [PHP] Problems w/ goto
Dear List -
I am sending this again since it does not seem to have posted.
Ethan
+++
Dear List -
Thank you with your excellent help
You approved all of us, no matter the peer review, when you signed up
or the list. The accumulation of knowledge,
is insurmountable when delivered as a whole, but devourable if you
need satiation of appetite.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit:
or maybe it's saturday morning and i'm drunk?
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
check out my new sig.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Dear List -
I am sending this again since it does not seem to have posted.
Ethan
+++
Dear List -
Thank you with your excellent help in the past. Here is another puzzler
I am trying to write a program that can have two(2) independent forms
in one PHP file. When I run the code below
[snip]
Thank you with your excellent help in the past. Here is another
puzzler
I am trying to write a program that can have two(2) independent forms
in one PHP file. When I run the code below [from PHP - A Beginner's
Guide], to which I have added a second form, it freezes. Without the
On Fri, 2010-12-17 at 10:50 -0600, Jay Blanchard wrote:
[snip]
Thank you with your excellent help in the past. Here is another
puzzler
I am trying to write a program that can have two(2) independent forms
in one PHP file. When I run the code below [from PHP - A Beginner's
Guide],
On 17 December 2010 17:08, Steve Staples sstap...@mnsi.net wrote:
On Fri, 2010-12-17 at 10:50 -0600, Jay Blanchard wrote:
[snip]
Thank you with your excellent help in the past. Here is another
puzzler
I am trying to write a program that can have two(2) independent forms
in one PHP
On Dec 17, 2010, at 11:08 AM, Steve Staples wrote:
[snip /]
GOTO should never be used like this.
GOTO should never be used.
Wow... that brought me back to 1990... using basic and batch files...
I honestly didn't even know that the GOTO was still in existence,
especially within
On Fri, 2010-12-17 at 12:22 -0500, Robert Cummings wrote:
On 10-12-17 12:08 PM, Steve Staples wrote:
On Fri, 2010-12-17 at 10:50 -0600, Jay Blanchard wrote:
[snip]
Thank you with your excellent help in the past. Here is another
puzzler
I am trying to write a program that can have
On Fri, Dec 17, 2010 at 12:16, Richard Quadling rquadl...@gmail.com wrote:
And have you seen all the sad faces ...
: {
on http://docs.php.net/manual/en/control-structures.goto.php#92763
Can't be good for them.
If only people knew how many hours - literally, hours - it took me
to keep
On Fri, Dec 17, 2010 at 12:22, Robert Cummings rob...@interjinn.com wrote:
I was one of the people that argued in favour of GOTO on the Internals list
a few years ago. GOTO has a use, and a very good one at that. It is by far
the most efficient construct when creating parsers or other similar
On 12/17/10 11:57 AM, Steve Staples wrote:
I had to show the people in my office, and we all got a chuckle from teh
XKCD comic in the PHP documentation for GOTO
http://ca2.php.net/goto
Steve
I was one of the people that argued in favour of GOTO on the Internals
list a few years ago. GOTO has
On 3 November 2010 21:42, Alexander Holodny alexander.holo...@gmail.com wrote:
To exclude unexcepted behavior in case of wrongly formated input data,
it would be much better to use such type-casting method:
intval(ltrim(trim($inStr), '0'))
2010/11/3, Nicholas Kell n...@monkeyknight.com:
On
On 4 November 2010 10:33, Richard Quadling rquadl...@gmail.com wrote:
?php
// Create test file.
$s_TabbedFilename = './test.tab';
file_put_contents($s_TabbedFilename, 0\t0002 . PHP_EOL .
4\t0004 . PHP_EOL);
// Open test file.
$fp_TabbedFile = fopen($s_TabbedFilename, 'rt') or
Hi,
The core of the code is simply
$fp = fopen('file.tab', 'rb');
while(!feof($fp))
{
$line = fgets($fp);
$data = explode(\t, $line);
...
}
So I try to manipulate the $data[X]. For example $data[0] is supposed to be
numeric so I $n = (int) $data[0]
One other thing if the second
On 4 November 2010 15:11, robert mena robert.m...@gmail.com wrote:
Hi,
The core of the code is simply
$fp = fopen('file.tab', 'rb');
while(!feof($fp))
{
$line = fgets($fp);
$data = explode(\t, $line);
...
}
So I try to manipulate the $data[X]. For example $data[0] is supposed
On 4 November 2010 15:31, robert mena robert.m...@gmail.com wrote:
Hi Richard,
I am not top posting. I am just explaining other symptoms that may point to
the cause since they may be the same and this is happening with the same
file. I'll try to get approval to release the file.
Meanwhile,
Hi,
I have a text file (utf-8 encoded) which contains lines with numbers and
text separated by \t. I need to convert the numbers that contains 0 (at
left) to integers.
For some reason one line that contains 0002 is casted to 0 instead of 2.
Bellow the output of the cast (int) $field[0]
To exclude unexcepted behavior in case of wrongly formated input data,
it would be much better to use such type-casting method:
intval(ltrim(trim($inStr), '0'))
2010/11/3, Nicholas Kell n...@monkeyknight.com:
On Nov 3, 2010, at 4:22 PM, robert mena wrote:
Hi,
I have a text file (utf-8
On Nov 3, 2010, at 4:22 PM, robert mena wrote:
Hi,
I have a text file (utf-8 encoded) which contains lines with numbers and
text separated by \t. I need to convert the numbers that contains 0 (at
left) to integers.
For some reason one line that contains 0002 is casted to 0 instead
Hi,
Good morning for all,
I'd like to understand why when i try to install the package 'php52-pdo-oci'
generated by 'rpmbuild -ba php52.spec' with feature inside of file , doesn't
work and returns the follow error :
# rpm -qpl /usr/src/linux/RPMS/x86_64/php52-pdo-oci-5.2.12-2.fc11.x86_64.rpm
I have csv file with special characters, stored in default
encoding(ISO-8859-1). I am convert file contents(string) to UTF-8using iconv.
This doesn't convert special characters properly, shows broken on fronted. Page
encoding meta tag are properly set to utf-8.
Characters are shown properly
On 11 February 2010 09:31, Pat patrick.j.r...@gmail.com wrote:
Richard Quadling wrote:
On 10 February 2010 16:31, Pat patrick.j.r...@gmail.com wrote:
hi all
having trouble here with a site that I am hosting on go-daddy
I want to keep my php and my images apart
so to do this I have the
hi all
having trouble here with a site that I am hosting on go-daddy
I want to keep my php and my images apart
so to do this I have the base directory which contains the php scripts.
On the directory above that I have
my photos stored in /photos
when I run my scripts I get the following:
On 10 February 2010 16:31, Pat patrick.j.r...@gmail.com wrote:
hi all
having trouble here with a site that I am hosting on go-daddy
I want to keep my php and my images apart
so to do this I have the base directory which contains the php scripts. On
the directory above that I have
my photos
I am using test-harness.php (PHP TAP Test Harness 1_0_0_BETA) and
test-more.php to write some unit tests for several libraries of
functions. These tests need to run from a MS-Windows CLI so they can be
run on our desktops for now and can be added to the automated build
process later.
I have
So I am developing a custom extension and I am having a issue. I have a header
file that I need included in the project. If I #include the header file
everything compiles and makes just fine, but after restarting the web server
the extension won't load.
If I remove or comment out the #include
On Sun, Jun 28, 2009 at 10:56, Eric A.
Boneymailingli...@vanhlebarsoftware.com wrote:
So I am developing a custom extension and I am having a issue. I have a header
file that I need included in the project. If I #include the header file
everything compiles and makes just fine, but after
On Sunday 28 June 2009 11:00:48 you wrote:
On Sun, Jun 28, 2009 at 10:56, Eric A.
Boneymailingli...@vanhlebarsoftware.com wrote:
So I am developing a custom extension and I am having a issue. I have a
header file that I need included in the project. If I #include the header
file
On Sun, Jun 21, 2009 at 6:17 PM, James McLean james.mcl...@gmail.comwrote:
On Mon, Jun 22, 2009 at 9:40 AM, Nathan Nobbequickshif...@gmail.com
wrote:
On Sun, Jun 21, 2009 at 5:56 PM, James McLean james.mcl...@gmail.com
wrote:
did you take a look at the size of the cache you created ?
On Tue, Jun 23, 2009 at 6:17 AM, Nathan Nobbequickshif...@gmail.com wrote:
hmm, 2 other thoughts i have..
. long shot, but do you have apc.php installed on a diff domain than the
moodle app (not sure but i suspect apc.php only shows cached values for the
domain in which its currently running
(Resend from around 1 week ago, because of no responses)
Hi All,
Over the weekend I setup a test of APC intending to benchmark a Moodle
installation with various APC settings to see how well I could get it
to perform. I successfully installed Moodle 1.9 and 2.0 under Apache
2.2.3 (installed via
On Sun, Jun 21, 2009 at 5:56 PM, James McLean james.mcl...@gmail.comwrote:
(Resend from around 1 week ago, because of no responses)
Hi All,
Over the weekend I setup a test of APC intending to benchmark a Moodle
installation with various APC settings to see how well I could get it
to
On Mon, Jun 22, 2009 at 9:40 AM, Nathan Nobbequickshif...@gmail.com wrote:
On Sun, Jun 21, 2009 at 5:56 PM, James McLean james.mcl...@gmail.com
wrote:
did you take a look at the size of the cache you created ?
Yes. Tried multiple segments and single, with cache size values
between 128mb and
Can you do a phpinfo(); and tell us the value of the setting
apc.filters (or every apc.* if you can)? Just curious, but I've seen
apps set that setting to avoid APC opcode caching.
Jonathan
On Sun, Jun 21, 2009 at 8:56 PM, James McLeanjames.mcl...@gmail.com wrote:
(Resend from around 1 week
On Mon, Jun 22, 2009 at 10:02 AM, Jonathan Tapicertapi...@gmail.com wrote:
Can you do a phpinfo(); and tell us the value of the setting
apc.filters (or every apc.* if you can)? Just curious, but I've seen
apps set that setting to avoid APC opcode caching.
Certainly, however it will have to
Hi.
Yes, as it turned out, the extension was not loaded. While following
some tutorial i added only apc.rfc1867 = 1 to php.ini. Turns out
that this particular line turns on one of apc functions (file
tracking), but not the apc itself.
However, now when i have apc turned on i still have a problem
Found the problem:
input type=hidden name=APC_UPLOAD_PROGRESS id=progress_key value=1 /
must always be before file input in the form.
2009/6/17 Valentinas Bakaitis v.bakai...@gmail.com:
Hi.
Yes, as it turned out, the extension was not loaded. While following
some tutorial i added only
Hello!
I am trying to track file upload progress using APC extension.
However, when trying to use, it gives
Fatal error: Call to undefined function apc_fetch() in
C:\wamp\www\old\getprogress.php on line 3
I am using WAMP 2.0, with php 5.2.8
APC extension appear on extensions list and is
Hi,
Does the extension appear on a phpinfo()?
Seems like the extension isn't loaded.
Jonathan
On Tue, Jun 16, 2009 at 5:20 PM, Valentinas
Bakaitisv.bakai...@gmail.com wrote:
Hello!
I am trying to track file upload progress using APC extension.
However, when trying to use, it gives
Fatal
Is there a straightforward way (or, heck, any way) of placing mixed
html/text content into xpath-specified nodes using any of PHP's XML
tools?
So far, I've tried SimpleXML and the DOM and things aren't coming out well.
SimpleXML:
/* $filename contains path to valid XML file, $xpathxpr
Weston C wrote:
Is there a straightforward way (or, heck, any way) of placing mixed
html/text content into xpath-specified nodes using any of PHP's XML
tools?
So far, I've tried SimpleXML and the DOM and things aren't coming out well.
Not sure if it is of any use to you, I don't use XPath at
Hey all,
A while back I asked about forms that take credit card info
and https. I have always put such forms behind SSL, but a site
I have been asked to do maintenance work on did not, and after
responses from the list and at my recommendation they
installed an SSL and I modified the code to
RewriteRule . index.php
Add an asterisk after the dot:
RewriteRule .* index.php
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Hey all,
No, adding * after the period had no affect at all. Still goes
to the live site.
Any other ideas? I'm stumped, desperate and on the verge of
requiring medication.
Skip
Alex S Kurilo aka Kamazee wrote:
RewriteRule . index.php
Add an asterisk after the dot:
RewriteRule .*
No, adding * after the period had no affect at all. Still goes to the
live site.
Sorry, I misunderstood you. I'm too lazy to read all the message :)
http and https may be handled by different virtual hosts.
http for http://dev.sitename.com/ seems to be configured properly (Virtual host
at
On 20 Apr 2009 at 11:37, Ray wrote:
snip
Any suggestions, Anyone?
Ray
Hi,
I adapted these scripts for my own user and have not had any problems:
http://www.theoslogic.com/scripts/php-gpg/
It does not use the gnupg extension at all but popen() or proc_open().
Regards
Ian
--
--
PHP
On Monday 13 April 2009 10:17:28 Ray wrote:
Hello all,
I'm trying to use the gnupg extension and I think everything is properly
installed.
I'm just using test data. I'm encrypting and then immediately decrypting.
But the decryption is failing with a unhelpful error message.
error message
Hello all,
I'm trying to use the gnupg extension and I think everything is properly
installed.
I'm just using test data. I'm encrypting and then immediately decrypting. But
the decryption is failing with a unhelpful error message.
error message :
Warning: gnupg::decrypt() [gnupg.decrypt]:
I can confirm the presence of the same issue on my installation, 5.2.9-2 on
Windows XP. Very annoying bug.
--
This message was sent on behalf of henrikol...@gmail.com at openSubscriber.com
http://www.opensubscriber.com/message/php-general@lists.php.net/11719414.html
--
PHP General Mailing List
Hi,
I have got an extension loaded in all three of my php config files (in
cli, in cgi, and in apache2 directories). The functions in the
extension are all accessible when running test scripts from the command
line, like:
php init.php
for example, in the init.php file I have calls to
Tom Worster skrev:
On 3/24/09 9:25 AM, Andrea Giammarchi an_...@hotmail.com wrote:
Dunno why you guys started talk about utf-8 problems, he has a list of ids
which should contain only unsigned integers, otherwise I do not get how that
query could work with an implode(',', $whatever) rather
Dunno why you guys started talk about utf-8 problems, he has a list of
ids
which should contain only unsigned integers, otherwise I do not get how
that
query could work with an implode(',', $whatever) rather than 'id in
('.implode(',', array_map('mysql_real_escape_string', $whatever)).')'
: virgilio.quila...@gmail.com
To: t...@ezl-data.dk
CC: php-general@lists.php.net
Subject: Re: [PHP] Problems with implode
Dunno why you guys started talk about utf-8 problems, he has a list of
ids
which should contain only unsigned integers, otherwise I do not get how
that
query could
max_allowed_packet setting? is it bigger than produced string?
To: php-general@lists.php.net
Date: Tue, 24 Mar 2009 15:23:20 +0100
From: t...@ezl-data.dk
Subject: Re: [PHP] Problems with implode
Per Jessen skrev:
Andrea Giammarchi wrote:
Dunno why you guys started talk about utf-8 problems
Giammarchi skrev:
What about MySQL max_allowed_packet setting? is it bigger than
produced string?
To: php-general@lists.php.net
Date: Tue, 24 Mar 2009 15:23:20 +0100
From: t...@ezl-data.dk
Subject: Re: [PHP] Problems with implode
Per Jessen skrev:
Andrea Giammarchi wrote:
Dunno why you guys
array:
$list = array(12300..12800); and see what happens.
regards,
Toke
Andrea Giammarchi skrev:
What about MySQL max_allowed_packet setting? is it bigger than
produced string?
To: php-general@lists.php.net
Date: Tue, 24 Mar 2009 15:23:20 +0100
From: t...@ezl-data.dk
Subject: Re: [PHP] Problems
Subject: Re: [PHP] Problems with implode
Per Jessen skrev:
Andrea Giammarchi wrote:
Dunno why you guys started talk about utf-8 problems, he has a list of
ids which should contain only unsigned integers, otherwise I do not
get how that query could work with an implode(',', $whatever)
Very
On 3/24/09 9:25 AM, Andrea Giammarchi an_...@hotmail.com wrote:
Dunno why you guys started talk about utf-8 problems, he has a list of ids
which should contain only unsigned integers, otherwise I do not get how that
query could work with an implode(',', $whatever) rather than 'id in
Hi All,
I've an array() with approx 1200 items (list of id-mappings) that part
works fine.
Now I want to add this list to a query:
$where = id in (.$idList.);
To accomplish that i do an implode:
$idList = implode(',', $TidList);
My problem is that some of the values gets concenated, others
On 3/24/09 7:14 AM, Toke Herkild t...@ezl-data.dk wrote:
I've an array() with approx 1200 items (list of id-mappings) that part
works fine.
Now I want to add this list to a query:
$where = id in (.$idList.);
To accomplish that i do an implode:
$idList = implode(',', $TidList);
My
Toke Herkild wrote:
Hi All,
I've an array() with approx 1200 items (list of id-mappings) that part
works fine.
Now I want to add this list to a query:
$where = id in (.$idList.);
To accomplish that i do an implode:
$idList = implode(',', $TidList);
My problem is that some of the
a problem, but I've never seen any issues
with it like you're describing.
-TG
- Original Message -
From: Toke Herkild t...@ezl-data.dk
To: php-general@lists.php.net
Date: Tue, 24 Mar 2009 12:14:01 +0100
Subject: [PHP] Problems with implode
Hi All,
I've an array() with approx 1200
TG wrote:
I don't think that would be a problem, the size of the array. I've
used implode at least once or twice on fairly large arrays. More
likely is something weird with your data.
Yeah, like the odd backspace or carriage return perhaps.
/Per
--
Per Jessen, Zürich (3.0°C)
--
PHP
On Tue, Mar 24, 2009 at 9:15 AM, Per Jessen p...@computer.org wrote:
TG wrote:
I don't think that would be a problem, the size of the array. I've
used implode at least once or twice on fairly large arrays. More
likely is something weird with your data.
Yeah, like the odd backspace or
On 3/24/09 8:58 AM, Per Jessen p...@computer.org wrote:
I can't reproduce that behaviour - I tried with ascii ('klop') and utf8
('Köhler') text.
neither can i. if the mail systems don't screw it up, here's my test
strings:
$strs = array(
'Iñtërnâtiônàlizætiøn',
'החמאס:
)).')' ...
so, the problem could be more about missed ids in the array obtaining ,, ...
so, in this case, array_filter before, no?
Regards
Date: Tue, 24 Mar 2009 09:19:53 -0400
From: m...@neimeyer.org
To: php-general@lists.php.net
Subject: Re: [PHP] Problems with implode
On Tue, Mar 24, 2009 at 9:15
2009/3/24 Toke Herkild t...@ezl-data.dk:
Hi All,
I've an array() with approx 1200 items (list of id-mappings) that part works
fine.
Now I want to add this list to a query:
$where = id in (.$idList.);
To accomplish that i do an implode:
$idList = implode(',', $TidList);
Are all of the
On 3/24/09 9:15 AM, Per Jessen p...@computer.org wrote:
TG wrote:
I don't think that would be a problem, the size of the array. I've
used implode at least once or twice on fairly large arrays. More
likely is something weird with your data.
Yeah, like the odd backspace or carriage
Andrea Giammarchi wrote:
Dunno why you guys started talk about utf-8 problems, he has a list of
ids which should contain only unsigned integers, otherwise I do not
get how that query could work with an implode(',', $whatever)
Very good point - maybe the OP has not yet tested his code that
Per Jessen skrev:
Andrea Giammarchi wrote:
Dunno why you guys started talk about utf-8 problems, he has a list of
ids which should contain only unsigned integers, otherwise I do not
get how that query could work with an implode(',', $whatever)
Very good point - maybe the OP has not yet
Tom Worster skrev:
On 3/24/09 9:15 AM, Per Jessen p...@computer.org wrote:
TG wrote:
I don't think that would be a problem, the size of the array. I've
used implode at least once or twice on fairly large arrays. More
likely is something weird with your data.
Yeah, like the odd backspace
What about MySQL max_allowed_packet setting? is it bigger than produced string?
To: php-general@lists.php.net
Date: Tue, 24 Mar 2009 15:23:20 +0100
From: t...@ezl-data.dk
Subject: Re: [PHP] Problems with implode
Per Jessen skrev:
Andrea Giammarchi wrote:
Dunno why you guys started
Hi,
I'm trying to use exec to call gammu.exe and send sms on windows XP.
This works from commandline:
C:\path\to\gammu.exe 1 --sendsms EMS 200 -text test1 test2
But if I run it through php like this:
$command = \C:\path\to\gammu.exe\ --sendsms EMS 200 -text \test1
test2\.;
@exec($command,
On Thu, Mar 19, 2009 at 9:19 AM, Kyohere Luke pr0...@gmail.com wrote:
Hi,
I'm trying to use exec to call gammu.exe and send sms on windows XP.
This works from commandline:
C:\path\to\gammu.exe 1 --sendsms EMS 200 -text test1 test2
But if I run it through php like this:
$command =
On Thu, Mar 19, 2009 at 9:25 AM, haliphax halip...@gmail.com wrote:
On Thu, Mar 19, 2009 at 9:19 AM, Kyohere Luke pr0...@gmail.com wrote:
Hi,
I'm trying to use exec to call gammu.exe and send sms on windows XP.
This works from commandline:
C:\path\to\gammu.exe 1 --sendsms EMS 200 -text
I have two queries one pulls out which users to use and the second pulls
those users orders
Looks something like this but is only pulling the first record:
$query = SELECT `UserName`, `AdminID` FROM admin
WHERE Key1 = 'YES' ;
$result = mysql_query ($query) ;
$row =
On Mon, Nov 3, 2008 at 2:46 PM, Ashley Sheridan [EMAIL PROTECTED]wrote:
On Mon, 2008-11-03 at 15:56 +0100, Anders Norrbring wrote:
Anders Norrbring wrote:
I've been staring myself blind, so now I don't get anywhere, please
do
advice..
I have a web page printed with PHP,
I've been staring myself blind, so now I don't get anywhere, please do
advice..
I have a web page printed with PHP, in a table I need to display images that
are stored in a SQL DB.
Getting the images into variables isn't an issue at all, but how do I output
it?
This is what I want to accomplish:
-Original Message-
From: Anders Norrbring [mailto:[EMAIL PROTECTED]
Sent: Monday, November 03, 2008 7:44 AM
To: php-general@lists.php.net
Subject: [PHP] Problems with images..
I've been staring myself blind, so now I don't get anywhere, please do
advice..
I have a web page
1 - 100 of 1046 matches
Mail list logo
