freelsjd wrote:
> Thank you philippe_44. I had forgetten about not sync with the LMS
> devices. However, I made sure it is only my two mini-next hubs (black
> one and an orange one), and it is still a bit off on the sync. LIke
> listening to a little echo going on.
>
> I launch the bridge
philippe_44 wrote:
> As said in #1 post, sync is not supported between CC and other LMS
> devices. You must create a sync group WITHIN chromecast devices.
> The for the COU consumption, how do launch the bridge and what is your
> config file
Thank you philippe_44. I had forgetten about not
philippe_44 wrote:
> The Bridge installs a web server on a random port from 49152 (can be
> configured), up to 32 ports, so your firewall must allow that. If
> everything seems to work but you have no sound, you propably have these
> ports blocked to the Chromcast player cannot get the audio.
As said in #1 post, sync is not supported between CC and other LMS
devices. You must create a sync group WITHIN chromecast devices.
The for the COU consumption, how do launch the bridge and what is your
config file
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3,
Hello. I am using latest versions of both CastBridge plugin and LMS
(1.21.1 and 8.0.0~1586146269) on a Linux/Buster server. Generally, it
is working great. However, I have noticed that after I play music using
the plugin on cast devices, the plugin will continually cycle at 100% on
a single
philippe_44 wrote:
> This address is the result of an answer to a broadcast request "hey, is
> there an LMS server around ?" and the IP address is the IP of the
> responder. This is squeezelite code that has been using a lot, that
> specific part I only modified it to get more information from
philippe_44 wrote:
> I don't know. If you look here...
>
I've been playing with the settings and even setting it like this:
29945
I still get:
Code:
Starting Squeeze2cast:
Sparkman wrote:
> Thanks. LMS is on the 168.1 network as well. All my players are there
> and I'm accessing LMS from my PC on the 168.1 network (the .2 network is
> not accessible from the .1 network). Not sure why it thinks LMS is on
> the .2 network then. Where does the plugin pick that
philippe_44 wrote:
> I will check again but this is not what the log says. It says that that
> the detected devices report to be on the 168.2 network
>
> [edit]: oops no sorry, it says that *LMS* is on the 168.2 network. This
> si what LMS reports from the dis overt request
Thanks. LMS is on
Sparkman wrote:
> No, all the players are on the 168.1 network. I dont know why it
> thinks they are there. The 168.2 network is just a single connection to
> another qnap over which I run backups between the two.
I will check again but this is not what the log says. It says that that
the
philippe_44 wrote:
> oh I see - It's not that it is using the wrong adapter, but your players
> are on network 2 (168.2) and are responding as such. So than the bridge
> is trying to reach them on these addresses of course, but from 168.1. I
> don't know what are you routing rules, but it's
Sparkman wrote:
> Thanks, but Im running LMS on a QNAP which uses linux. It seems to
> want to talk to the wrong adapter even though Ive specified the correct
> one to use.
oh I see - It's not that it is using the wrong adapter, but you players
are on network 2 (168.2) and are responding as
philippe_44 wrote:
> No I don't. I've done one workaround which is to clear the SSL context
> (although it's not supposed to be needed) but I don't know what else to
> do. Maybe you can try a different ssl stack. Try removing xxxeay32.dll
> in the plugin directory to see in Win10 defaults
Sparkman wrote:
> Anyone have any ideas? @philippe_44, thoughts?
No I don't. I've done one workaround which is to clear the SSL context
(although it's not supposed to be needed) but I don't know what else to
do. Maybe you can try a different ssl stack. Try removing xxxeay32.dll
in the plugin
Anyone have any ideas? @philippe_44, thoughts?
Sparkman wrote:
> Hi all, I'm having issues with this plugin (and basically the same issue
> with the upnp plugin) running on a QNap. I've had it running before
> when I was using an older version of LMS, but since moving to 7.9.3 and
> getting
philippe_44 wrote:
> I'm not aware of anything to control that on a CCA. Re Windows mahcine,
> yes, please use that for test
I'm experiencing the same with the CastBridge running on a Windows 10
machine.
Code:
[04:59:09.946] CastConnect:365 [0048DB0C]: SSL
SmrtJustin wrote:
> Is there anyway to control that on a Chromecast Audio, besides
> unplugging them? They're left constantly plugged in, and I don't do a
> "power off" in LMS. I could potentially try running a server on one of
> my Windows machines.
I'm not aware of anything to control that
philippe_44 wrote:
> No I mean, the device shutting down. I was also suggesting using another
> server to check if the openSSL stack behaves differently (which was the
> case in the issue I saw previously) because your case seems to be
> similar where the SSL connection terminates and when it's
Hi
first of all thankyou philippe_44 for making this addon!
I have it set up with LMS on windows. I can see my Chromecasts in the
web control. But when I play there is no audio. when chromebridge
start I hear the startup sound and If I click on the volume I can hear
the volume changing
philippe_44 wrote:
> It's documented here https://github.com/thibauts/node-castv2, you can
> look at the "keeping the connection alive" section. It's a JSON-encoded
> 'PING' sent every ~3s
Thanks Philippe!
//Johan
Windows 10
LMS 7.9.3
Local Player Plugin (Squeezelite)
Intel Compute Stick
SmrtJustin wrote:
> Squeezebox is running on an always on server in my house, so it's not
> shutting down. I suppose anything is possible that something ends those
> connections. Thanks for looking.
No I mean, the device shutting down. I was also suggesting using another
server to check if
ButC wrote:
> Revo says they'll look into it. But they also asked: "It would be
> interesting to know what format the keep awake message takes ".
>
> Is there such a format and if so, what is it called?
It's documented here https://github.com/thibauts/node-castv2, you can
look at the
philippe_44 wrote:
> So, as expected, the device does shutdown the connection at some point.
> Are you sure it's not entering into some sort of idle/powerdown? Still,
> it should reconnect properly when you try to play again. What is
> surprising is that a month or so ago I did a correction at
philippe_44 wrote:
> The way the chromecast protocol works, there is keep-alive message every
> 3s on an always open SSL connection and I'm using it as long as you
> don't power off the device in LMS. So if it still goes off, it means it
> ignores that keep-alive message
Revo says they'll look
SmrtJustin wrote:
> Here is a log from last night. You can see the earlier playing with
> Spotify URLs that ends at ~7:32, and then when I went to try playing
> again at 00:45 from the server (192.168.1.100). It wouldn't play until
> I restarted squeeze2cast.
>
> Here are the time stamps
SmrtJustin wrote:
> Okay. I'll let it sit overnight and try to get a log of it not working
> tomorrow.
Here is a log from last night. You can see the earlier playing with
Spotify URLs that ends at ~7:32, and then when I went to try playing
again at 00:45 from the server (192.168.1.100). It
Revo says they'll look into it. But they also asked: "It would be
interesting to know what format the keep awake message takes ". Is there
such a format and if so, what would it be?
//Johan
Windows 10
LMS 7.9.3
Local Player Plugin (Squeezelite)
Intel Compute Stick
Okey, thanks Philippe. I'll check with Revo and hear what they have to
say.
//Johan
Windows 10
LMS 7.9.3
Local Player Plugin (Squeezelite)
Intel Compute Stick
ButC's Profile:
ButC wrote:
> I'm having a chromecast audio connected through aux in to my kitchen
> radio (Revo Superconnect). Using this plugin works wonders playing Radio
> Paradise to the kitchen radio. Thanks for all the hard work keeping this
> running!
>
> I have a question: When pausing the music and
No, the radio shuts off. I have to manually turn it on pretty much every
time I've paused the music.
I'd rather not have RP stream for hours on end. But maybe there's no
other way...
//Johan
Windows 10
LMS 7.9.3
Local Player Plugin (Squeezelite)
Intel Compute Stick
Does the radio Mute ?
Pop a headphone jack into the radio ? That often disconnects the speaker
Turn the volume down
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this
I'm having a chromecast audio connected through aux in to my kitchen
radio (Revo Superconnect). Using this plugin works wonders playing Radio
Paradise to the kitchen radio. Thanks for all the hard work keeping this
running!
I have a question: When pausing the music and nothing is being played
philippe_44 wrote:
> I would rather have a clean log without additional debugging to start
> with
Okay. I'll let it sit overnight and try to get a log of it not working
tomorrow.
SmrtJustin's Profile:
SmrtJustin wrote:
> I keep having the following problem with the bridge. After my
> Chromecasts have sat idle for ~12 hours (could be less, but that's
> certainly enough time), when I try playing music, they simply won't
> start playing. Enough skipping, pausing, playing, etc will eventually
I keep having the following problem with the bridge. After my
Chromecasts have sat idle for ~12 hours (could be less, but that's
certainly enough time), when I try playing music, they simply won't
start playing. Enough skipping, pausing, playing, etc will eventually
make the player disappear
Hi all, I'm having issues with this plugin (and basically the same issue
with the upnp plugin) running on a QNap. I've had it running before
when I was using an older version of LMS, but since moving to 7.9.3 and
getting rid of SSOTS/SSODS as the LMS installer, it has not worked. I
tried
Hi all, I'm having issues with this plugin (and basically the same issue
with the upnp plugin) running on a QNap. I've had it running before
when I was using an older version of LMS, but since moving to 7.9.3 and
getting rid of SSOTS/SSODS as the LMS installer, it has not worked. I
tried
philippe_44 wrote:
> Try to put "Extra command line options" to "-d all=sdebug" and send me
> (zip attach b/c it will be big) the relevant castbridge log
Will do - but may take a couple of days. A bit overwhelmed here coping
with the virus lockdown.
LMS server: O2 Joggler with Jivelite
castalla wrote:
> And again:
>
> [20-03-15 23:31:40.2429] Slim::Player::Squeezebox2::statHandler (149)
> Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
> [20-03-16 05:02:24.6234] Slim::Player::Squeezebox2::statHandler (149)
> Error: cc:cc:70:48:d0:97: Decoder does not
And again:
[20-03-15 23:31:40.2429] Slim::Player::Squeezebox2::statHandler (149)
Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
[20-03-16 05:02:24.6234] Slim::Player::Squeezebox2::statHandler (149)
Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
philippe_44 wrote:
> That's a good hint. @castalla, do you use transcode?
No transcode ... the stream is from Tunein NDR1 - reported as 128kbps
CBR, MP3 Radio. Been playing same stream now for over 8 hours without
any issues.Doesn't happen with other mp3 streams.
LMS server: O2 Joggler
bpa wrote:
> I've seen this error with MPEG4 files with leading mdat (i.e.index is
> after audio data which is not good for streaming) so files needs to be
> transcoded even for player than can play MPEG4 natively. A fix fwas
> committed to LMS last July (i.e. 7.9.2) which I thought fixed
castalla wrote:
> I am still getting these messages in the log
>
> [20-03-14 06:36:57.7651] Slim::Player::Squeezebox2::statHandler (149)
> Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
> [20-03-14 07:55:29.6449] Slim::Player::Squeezebox2::statHandler (149)
> Error:
castalla wrote:
> I am still getting these messages in the log
>
> [20-03-14 06:36:57.7651] Slim::Player::Squeezebox2::statHandler (149)
> Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
> [20-03-14 07:55:29.6449] Slim::Player::Squeezebox2::statHandler (149)
> Error:
Verulamius wrote:
> Philippe,
>
> Thanks for your hard work on this. My castbridge plugin is still at
> 1.21.0. Is there any way I can force an update to 1.21.1? I run my LMS
> on a rasberry pi - using the Max2play architecture.
> Alternatively, I can wait until it updates in the
I am still getting these messages in the log
[20-03-14 06:36:57.7651] Slim::Player::Squeezebox2::statHandler (149)
Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
[20-03-14 07:55:29.6449] Slim::Player::Squeezebox2::statHandler (149)
Error: cc:cc:70:48:d0:97: Decoder does
philippe_44 wrote:
> But meanwhile I've looked at this and there is an issue with some
> openssl version and new CC if the ssl session is not cleared upon
> closing. So I've updated that and it seems to work now. Can you verify?
Philippe,
Thanks for your hard work on this. My castbridge
Verulamius wrote:
> Philippe,
>
> Thanks for the response. I will pause the music from now on.
But meanwhile I've looked at this and there is an issue with some
openssl version and new CC if the ssl session is not cleared upon
closing. So I've updated that and it seems to work now. Can you
Hi All
I just setup LMS-to-Cast up on my Squeeze server (running on my NAS).
I've had a few Squeezeboxes for a looong time. I now listen to a lot of
Spotify but it doesn't have everything! I'm delighted to be able to
play my collection now in my kitchen via a Google Home connected to a
high
philippe_44 wrote:
> If you have not setup any of my bridge to do transcoding (both use
> "none" for transcode), then there is no bit-level difference as far as
> the bridges are concerned. Only thing is that audio level forwarded to
> UPnP/Chromecast are indeed different, but that's just a
philippe_44 wrote:
> Maybe Google has done some funny change again to their FW. What happens
> here is that when you power it on again, the connection is established
> but it fails a few seconds later. You don't really need to switch off
> the CC, you know.
Philippe,
Thanks for the response.
Verulamius wrote:
> Log:
>
> The problem child is the "Kitchen speaker". Played Radio 3, turned off
> the speaker (using the LMS web screen), turned it on again but not
> playing radio 3.
>
> [10:22:01.231717] sq_callback:253 [0x133a00]: device set OFF
> [10:22:01.280046] read_bytes:169
mjl33 wrote:
> I'm hearing sounds differences in between CastBRidge and UPNP Bridge.
> I'll give you some background and maybe you can help me understand what
> I am hearing.
>
> My setup:
>
> Daphile server (LMS 7.9.2), Material Skin controller, streaming to a
> Naim Muso-2 (wired
I'm hearing sounds differences in between CastBRidge and UPNP Bridge.
I'll give you some background and maybe you can help me understand what
I am hearing.
My setup:
Daphile server (LMS 7.9.2), Material Skin controller, streaming to a
Naim Muso-2 (wired connection)
I first streamed to the
philippe_44 wrote:
> Not providing a log ;)
Log:
The problem child is the "Kitchen speaker". Played Radio 3, turned off
the speaker (using the LMS web screen), turned it on again but not
playing radio 3.
Starting Squeeze2cast:
castalla wrote:
> I've started to see these messages over the last few days - playing an
> mp3 live stream from Tunein:
>
> [20-03-10 00:24:05.5389] Slim::Player::Squeezebox2::statHandler (149)
> Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
> [20-03-10 00:36:39.2385]
.. and again - out of the blue
[20-03-11 19:07:35.2886] Slim::Player::Squeezebox2::statHandler (149)
Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
The stream is 128 kbps mp3 (via Tunein)
LMS server: O2 Joggler with Jivelite
Amp: Denon PMA-50
Players/Speakers:
Verulamius wrote:
> I have just started to have a problem with my chromecasts which have
> been working up to now.
>
> After using the chromecast I turn it off (eg after using iplayer). When
> I try to play to it again it is not being recognised by LMS.
>
> However when I click on the
I have just started to have a problem with my chromecasts which have
been working up to now.
After using the chromecast I turn it off (eg after using iplayer). When
I try to play to it again it is not being recognised by LMS.
However when I click on the generate button in the advanced
I've started to see these messages over the last few days - playing an
mp3 live stream from Tunein:
[20-03-10 00:24:05.5389] Slim::Player::Squeezebox2::statHandler (149)
Error: cc:cc:70:48:d0:97: Decoder does not support file format, code 0
[20-03-10 00:36:39.2385] Slim::Utils::Misc::msg (1256)
Paul Webster wrote:
> Looks like it does get the track details from TuneIn ...
> I managed to find a station (Hippie Soul Cafe) that has track info in
> the stream (from Icecast in this case) but does not send track info to
> TuneIn ... and Nest/Google Home Mini does not see it.
> Ah well
>
>
Looks like it does get the track details from TuneIn ...
I managed to find a station (Hippie Soul Cafe) that has track info in
the stream (from Icecast in this case) but does not send track info to
TuneIn ... and Nest/Google Home Mini does not see it.
Ah well
Looks like I'll have to try to
Firmware version 191160
Cast version 1.44.191160
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105
View this thread:
... or thinking a bit more about it ... it might be getting the
track info from TuneIn because the radio station sends it there as
well.
I'll try to find another station to test with that has ICY but does not
have track info appearing in TuneIn.
Paul Webster
http://dabdig.blogspot.com
Paul Webster wrote:
> I just tried a radio station that I know has ICY metadata for the track
> info (I know because I put it there) and the Home Mini identifies it
> correctly, including on track change.
> Given how obscure the tracks were that were playing, I am pretty sure it
> did not get it
philippe_44 wrote:
> But Chromecast devices devices do not support ICY.
>
I just tried a radio station that I know has ICY metadata for the track
info (I know because I put it there) and the Home Mini identifies it
correctly, including on track change.
Given how obscure the tracks were that
Paul Webster wrote:
> I finally have a Google Chromecast device ... a gifted Nest Home Mini
> (Google Home Mini v2).
>
> One thing I noticed ... if I play Radio France stations with my plug-in
> to get the meta info then the song changes do not get recognised by the
> Chromecast device - so it
I finally have a Google Chromecast device ... a gifted Nest Home Mini
(Google Home Mini v2).
One thing I noticed ... if I play Radio France stations with my plug-in
to get the meta info then the song changes do not get recognised by the
Chromecast device - so it always thinks that the current
philippe_44 wrote:
> No change on my side
I suspect something to do with my crappy internet connection ... will
monitor
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker,
castalla wrote:
> I'm suddennly getting the following entries in the server log
>
> [20-02-19 05:22:43.1119] Plugins::CastBridge::Squeeze2cast::beat (178)
> crashed ... restarting
> [20-02-19 05:22:43.1363] Plugins::UPnPBridge::Squeeze2upnp::beat (187)
> crashed ... restarting
> [20-02-19
I'm suddennly getting the following entries in the server log
[20-02-19 05:22:43.1119] Plugins::CastBridge::Squeeze2cast::beat (178)
crashed ... restarting
[20-02-19 05:22:43.1363] Plugins::UPnPBridge::Squeeze2upnp::beat (187)
crashed ... restarting
[20-02-19 05:23:13.1370]
philippe_44 wrote:
> You have squeeze2cast-win otherwise you would not have that log. Youre
> looking at the wrong place, plugins are in
> programdata\squezzboxserver\cache ... (youll find it from there)
I'm a doughball, found the path and added the inbound rule, all working
fine now can use
You have squeeze2cast-win otherwise you would not have that log. Youre
looking at the wrong place, plugins are in
programdata\squezzboxserver\cache ... (youll find it from there)
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat,
philippe_44 wrote:
> Send the log of castbridge (dont change any setting, just copy paste
> the log as you find it in settings, advanced chromecast bridge). And I
> still think this is a firewall issue, the rule you have to set is not
> for squeezesvr but for squeeze2cast-win.exe
Thanks
strocky wrote:
> Thanks for the tips but changing the transcode to NONE doesn't work
>
> Don't think the firewall is the issue as it streams the metadata,
> however did make an inbound rule to C:\Program Files
> (x86)\Squeezebox\server\SqueezeSvr.exe
> However still doesn't work
>
> I don't
Thanks for the tips but changing the transcode to NONE doesn't work
Don't think the firewall is the issue as it streams the metadata,
however did make an inbound rule to C:\Program Files
(x86)\Squeezebox\server\SqueezeSvr.exe
However still doesn't work
strocky wrote:
> Hi there recently purchased a LG WK9 XBOOM Smart Speaker and installed
> this plugin via LMS
> The plugin recognises the speaker and sends the cover art and title file
> to the speaker but doesn't play any music (sticks on 0:00)
>
> These are my setting below, any idea what I
strocky wrote:
> Hi there recently purchased a LG WK9 XBOOM Smart Speaker and installed
> this plugin via LMS
> The plugin recognises the speaker and sends the cover art and title file
> to the speaker but doesn't play any music (sticks on 0:00)
>
> These are my setting below, any idea what I
Hi there recently purchased a LG WK9 XBOOM Smart Speaker and installed
this plugin via LMS
The plugin recognises the speaker and sends the cover art and title file
to the speaker but doesn't play any music (sticks on 0:00)
These are my setting below, any idea what I need to change?
29323
philippe_44 wrote:
> The player is closing the connection or something in your network is
> dropping it
How can I prevent that from happening?
tmn103's Profile: http://forums.slimdevices.com/member.php?userid=66786
View
The player is closing the connection or something in your network is
dropping it
Envoyé de mon iPad en utilisant Tapatalk
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000,
ShairPortW, JRiver 21,
I've been having a problem where playback stops in the middle of an
album, e.g. three tracks from 10 might play and after track 3 the music
stops.
When I look at the interface it appears that the player is stuck in some
way. The track timer is stuck part way through the last song that was
Hi,
Thanks for all your wonderful plugins. I am utilizing castbridge (vizio
soundbar) with shairtunes2W and airplaybridge with group plugins. While
the group gets discovered properly in all airplay devices and music is
heard through devices, there is synchronization issue between my
chromecast
Balls!
It's now working. On both players.
I did tinker with Windows networking, the server thought it was on a
public network (a repeating Windows annoyance)not sure I done
anything else but now working.
Much more slick on the full fast cc compared to the built in cc audio on
the amp,
Hi,
Had this plugin a while but not needed to use it recently.
However I remembered it hadn't worked the last time, so unticked from
LMS plugin screen to uninstall it, rebooted, reinstalled, read through
the guide, didn't change much.
Generated new XML.
Liked the sound of full processing, so
I can report back that it somehow seems to have solved itself, all
working OK now.
piert's Profile: http://forums.slimdevices.com/member.php?userid=65909
View this thread:
For some reason, for the last week I have to re-generate the
configuration file every day. Is this a problem that anybody recognizes?
I am running LMS on a Win 10 NUC and 3x Chromecast and 4x Squeezebox
Classic. Every day only the Squeezeboxes are 'present' and all
Chromecasts are 'lost' until I
Thanks, I'll keep an eye on it and report back if needed. Again, thanks
for a great plug-in.
mikeh49's Profile: http://forums.slimdevices.com/member.php?userid=48620
View this thread:
mikeh49 wrote:
> I just invoked CastBridge using the plug-in menu of the LMS. It works!
> I was able to cast to a Chromecast Audio and Nest Mini speaker with only
> basic setup using the guide included with the plug-in. Good work, and
> thanks.
>
> Checking the log, I see the following:
>
I just invoked CastBridge using the plug-in menu of the LMS. It works!
I was able to cast to a Chromecast Audio and Nest Mini speaker with only
basic setup using the guide included with the plug-in. Good work, and
thanks.
Checking the log, I see the following:
> [/[20-01-07 15:27:13.1566]
PasTim wrote:
> The command line option would look like:
> -s 192.168.1.142:3483
>
> Whether you also need to specify a "network socket to use" I'm not sure,
> but it may help, something like:
>
> 192.168.1.142:49153
Thanks to all.
john greenwood wrote:
> My config file says "?", which I assume means no. I
> found this:
>
> " [ip[:port] | ?] default = ?
>
> ip = IP address or network name, port = port number (usually 3483) of
> your LMS server.
>
> Use ? for auto-discovery
>
> This can be overridden in the command
PasTim wrote:
> Do you always specify the server on the bridge spec? It might be worth
> doing. See the user guide.
My config file says "?", which I assume means no. I
found this:
" [ip[:port] | ?] default = ?
ip = IP address or network name, port = port number (usually 3483) of
your LMS
john greenwood wrote:
> Just ran a complete virus scan on my music server with no reported
> issues. In the course of my troubleshooting, I've also done a factory
> reset of my router. I have no problems with it other than this.
>
> Right now things are working - fingers crossed - tomorrow
philippe_44 wrote:
> I concur with Pauls view of a network problem because the bridge is
> loosing connection with LMS (not with the CC device) all the time and
> that should really not happen.
>
> So either your OS does something strange, a firewall, or there is a new
> PLC in the network
Paul Webster wrote:
> Has anything been added to, or changed in, the network recently?
> e.g. new routers, firmware update, smart home stuff
I concur with Pauls view of a network problem because the bridge is
loosing connection with LMS (not with the CC device) all the time and
that should
Has anything been added to, or changed in, the network recently?
e.g. new routers, firmware update, smart home stuff
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile:
john greenwood wrote:
> Seems the config file did not upload. Trying again.
>
>
After relying on Squeezebox/LMS for more than a decade and relying on
CastBridge for several years, it has all of a sudden become so
problem-ridden that absent a fix, I will have to switch systems. I
don't want
Seems the config file did not upload. Trying again.
28893
+---+
|Filename: CastBridge config file.txt |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=28893|
philippe_44 wrote:
> What seems to happen is that the bridge is losing connection with LMS
> very often. What is your network configuration?
Hi - didn't see the response at first. As mentioned above, after LMS
worked for one evening, the problem has returned.
Yesterday during
601 - 700 of 2237 matches
Mail list logo
