1.We went to annual for 2017, but then we are in permanent shutdown.
2.Not yet, but we expect it. A little data mining of the electronic
dosimeter data for previous periods should be able to provide an estimate.
3.Landauer OSLN
4.10 mrem
5.Right now, if you are a radworker
Looking for someone with some hands-on experience with the Canberra iPix.
David Brehm
Sr. Radiological Engineer
Radiation Protection - Fort Calhoun Station
Omaha Public Power District
9610 Power Lane, Blair, NE 68008
Office: 402.533.7582
Cellular: 402.237.9840
dmbr...@oppd.com
---
OPPD - Fort Calhoun has a Shepherd Model 89 and a Shepherd Mini 89 that are no
longer in use. We are seeking a new home for them. They are both in
operational condition. Both units have Cs-137 sources. The larger source (~
200 Ci) in the Model 89 is required to be tracked in the National So
Yea...they did ask us to do that. Not surprisingly, a gas-proportional (Argos
5 A/B in our case) has very poor gamma sensitivity - the specification sheets
indicate < 1% gamma efficiency. It took about 3,000 nCi of Cs137 (equivalent
to around 10 ALI of our mix) to get it to alarm 10/10 times.
1.Yes
2.We use the Mirion/Canberra Apex Gamma with LabSOCS characterized
detectors. For the mathematical efficiency calibrations, we perform an annual
verification count to ensure that the characterization is still valid. Any
empirically derived efficiency calibrations are performed a
houn Station
Omaha Public Power District
9610 Power Lane, Blair, NE 68008
Office: 402.533.7582
Cellular: 402.237.9840
dmbr...@oppd.com<mailto:dmbr...@oppd.com>
From: Vickers, Glen:(GenCo-Nuc) [mailto:glen.vick...@exeloncorp.com]
Sent: Thursday, August 24, 2017 7:09 AM
To: BREHM, DAVID M ;
Get a large magnetic field too close to the PMT and the count rate will likely
go to zero on that detector. Seen this with PMT based instruments near large
magnetic fields (e.g., heavy equipment hydraulic rams, large vehicle
alternators, large magnets, etc.)
Suggest testing this with the magne
At one time or another, we’ve had most of the problems listed. The biggest fix
was switching to the LDM-250. That prevented the folks from taking the
dosimeter in the middle of writing to the dosimeter. Far fewer issues since
doing that. Failing the LDM-250, coach folks to take their hands o
For the most part, Fort Calhoun Station uses the MaxAir PAPR hood (we get them
via UniTech). No cross-contamination issues that I can recall.
David Brehm
Sr. Radiological Engineer
Radiation Protection – Fort Calhoun Station
Omaha Public Power District
FC-3-1
9610 Power Lane, Blair, NE 68008
Offi
Generally, we use an alpha-only instrument operating on the alpha voltage
plateau. That way there is essentially no beta interference - the precise
quantifying of which, for a calculated compensation, is tricky & very
instrument and radionuclide mix dependent. The detector type will determine
All,
I'm looking for any actual or planned radiological monitoring during cask/fuel
drying operations. In particular, monitoring of the gas flow path from the
cask to the installed building exhaust plenum(s).
The object of this exercise is to ensure that we have sufficient data to
accurately
We did. Much discussion on the very issues you mention. The individual wound
up working in another non-shift position that also required a licensed operator.
David Brehm
Sr. Radiological Engineer
Radiation Protection - Fort Calhoun Station
Omaha Public Power District
FC-3-1
9610 Power Lane, Bla
I’d be reluctant to put in a procedure hard limits. A guideline or documented
expectation does seem prudent to ensure that someone does not do something that
would result in an area posting change without some prior thought/planning.
While rare (in my experience) it does happen that particularl
Fort Calhoun Station does not use tamper seals. Our near zero instance of
as-found our of calibration (excluding broken instruments), indicates that
staff are not messing with the instruments.
[OPPD logo]
David Brehm
Sr. Radiological Engineer
Radiation Protection - Fort Calhoun Station
Omaha Pu
I find the concept intriguing, but not sure how useful it would be for most
field applications. If, for example, you had a radionuclide mix that varied, it
would be handy. Particularly if you are operating with low-level airborne
activity. For us, we determine either a weighted average energy
1.We calibrate & maintain the whole body counters (Canberra/Mirion Fastscan
and AccuScan II) in house. We've kept the calibration of all our spectrometers
within the RP group and have been able to maintain the expertise to do so.
Assuming that you have individuals with the interest, backgro
16 matches
Mail list logo