t; <[EMAIL PROTECTED]> on 16.07.2001 15:14:21
Please respond to "Protel EDA Forum" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
cc:
Subject: Re: [PEDA] need uMAX10 footprint
Just to jump in in defense of Maxim...I use a lot of their powe
esigner,
> Norsat International Inc.,
> #300 - 4401 Still Creek Dr.,
> Burnaby, B.C., V5C 6G9.
> Tel. (604) 292-9089 direct
> Fax (604) 292-9010
> website www.norsat.com
>
> > -Original Message-
> > From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
> > S
st
> thought I would throw that out in case the negatives scare some designers
> away from some very good parts
> Madhu
>
> -Original Message-
> From: Jon Elson [mailto:[EMAIL PROTECTED]]
> Sent: Friday, July 13, 2001 3:47 PM
> To: Protel EDA Forum
> Subject:
Elson [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 3:47 PM
To: Protel EDA Forum
Subject: Re: [PEDA] need uMAX10 footprint
Bagotronix Tech Support wrote:
> > one last thought on this
> > it may not matter what footprint you use because when you really get
> > rolling an
001 10:02 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] need uMAX10 footprint
>
>
> thanks Brad
> so i take it you think it is worth it?
>
> Dennis Saputelli
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
> -Original Message-
> > From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
> > Sent: Sunday, July 15, 2001 9:07 PM
> > To: Protel EDA Forum
> > Subject: Re: [PEDA] need uMAX10 footprint
> >
> >
> > this s
rnaby, B.C., V5C 6G9.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com
> -Original Message-
> From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, July 15, 2001 9:07 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] need uMAX10 footprint
>
this sounds ok and potentially worthwhile ($175/yr)
but what is the cost to get in initially?
Dennis Saputelli
Brad Velander wrote:
>
> Ivan,
> can you point me directly towards a detail for the package size? I
> will then send you the footprint I would use from SMT+ 's footprint patter
One company that I've been doing some contract development for used one of
the Maxim ADC chips (don't remember which offhand). It was single sourced,
and Maxim pulled the plug on it. Right now they are buying it where they
can on the spot market for up to $75 per chip. I believe that the nor
> That is curious! I have been using a few Maxim parts in fair numbers, and
have
>
> never had trouble getting parts. Now, the parts I use probably are not
the
> ones
> going into cell phones, which may be the problem.
>
> I have used the Max 412, and use a lot of Max310 and Max901 parts, and
ha
N, say it isn't so... :)
_
Brian Guralnick
- Original Message -
From: "Dennis Saputelli" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Friday, July 13, 2001 2:45 PM
Subject: Re: [PEDA] need uMAX10 footpr
Bagotronix Tech Support wrote:
> > one last thought on this
> > it may not matter what footprint you use because when you really get
> > rolling and really need the chips they won't be available
> > it is Maxim you know :)
> >
>
> Yeah, they stink when it comes to parts availability. Their par
their game plan is to throw as many part types as they can against the
wall and see which ones stick
it works for them because the real money is in very high volume for
which there is usually enough planning and time
for the smaller guys ...
Dennis Saputelli
Bagotronix Tech Support wrote:
>
> >
> one last thought on this
> it may not matter what footprint you use because when you really get
> rolling and really need the chips they won't be available
> it is Maxim you know :)
>
Yeah, they stink when it comes to parts availability. Their parts are
great, if you can get 'em. I try to avo
t.com
> -Original Message-
> From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
> Sent: Friday, July 13, 2001 11:46 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] need uMAX10 footprint
>
>
> one last thought on this
> it may not matter what footprint you use because when you
one last thought on this
it may not matter what footprint you use because when you really get
rolling and really need the chips they won't be available
it is Maxim you know :)
Dennis Saputelli
--
___
www.integratedcontrolsi
When I saw Ivan's initial request, I remembered using a small 10 pin package
made by Analog Devices recently.
I looked on the web, found the uMax package drawing, and compared it to the
footprint I had made for that part, and it seemed to be compatible.
I cannot now re-create where I got the dat
Brad:
What is SMT+'s website URL?
Best regards,
Ivan Baggett
Bagotronix Inc.
website: www.bagotronix.com
- Original Message -
From: "Brad Velander" <[EMAIL PROTECTED]>
To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
Sent: Friday, July 13
ginal Message -
From: "Brad Velander" <[EMAIL PROTECTED]>
To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
Sent: Friday, July 13, 2001 12:29 PM
Subject: Re: [PEDA] need uMAX10 footprint
> Ivan,
> can you point me directly towards a detail for the packa
., V5C 6G9.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com
> -Original Message-
> From: Bagotronix Tech Support [mailto:[EMAIL PROTECTED]]
> Sent: Friday, July 13, 2001 9:06 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] need uMAX10 footprint
>
>
is hosted by a
local ISP for about $40 per month.
Best regards,
Ivan Baggett
Bagotronix Inc.
website: www.bagotronix.com
- Original Message -
From: "Dennis Saputelli" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Friday, July
having been in such a situation before i would suggest just making your
own based on the mech dwg with pad dimensions adjusted according to your
experience.
there are not a lot of pins on those uMax
the slight (but important) differences in footprints are as much a
matter of the particular assy p
Hello, all:
Does anyone have a land pattern (footprint) for the uMAX10 package? If so,
I would appreciate a copy of it. Please send it to my e-mail address, not
the Protel group.
This is used by a Maxim part, and I called Maxim for the recommended land
pattern. They didn't have one, and told
23 matches
Mail list logo
