Re: [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs

On Wed, Sep 21, 2016 at 10:02:47AM -0400, Tom Rini wrote: > On Wed, Sep 21, 2016 at 03:46:08PM +0200, Enric Balletbo Serra wrote: > > 2016-09-21 14:51 GMT+02:00 Tom Rini : > > > On Wed, Sep 21, 2016 at 01:46:51PM +0200, Enric Balletbo Serra wrote: > > >> Hi, > > >> > > >>

Re: [U-Boot] [PATCH v2 0/3] Add sdram capacity auto detect for rk3288

Hi Sandy, On 09/21/2016 08:41 PM, Sandy Patterson wrote: On Tue, Sep 20, 2016 at 10:56 PM, Kever Yang > wrote: parameters changes from dts to auto-detect including those I removed from dts and ddrconfig, stride, they

Re: [U-Boot] [PATCH v2 1/3] rk3288: config change for enable dram capacity auto-detect.

Hi Sandy, On 09/21/2016 07:53 PM, Sandy Patterson wrote: On Tue, Sep 20, 2016 at 11:00 PM, Kever Yang > wrote: Hi Sandy, On 09/20/2016 09:21 PM, Sandy Patterson wrote: You're probably going to need to change this

[U-Boot] [PATCH v2 3/3] arm: mvebu: NAND support for DB-88F6820-AMC

Enable the NAND interface on this board. Signed-off-by: Chris Packham --- Changes in v2: None arch/arm/dts/armada-385-amc.dts | 8 configs/db-88f6820-amc_defconfig | 2 ++ include/configs/db-88f6820-amc.h | 4 3 files changed, 14 insertions(+) diff

[U-Boot] [PATCH v2 2/3] arm: mvebu: add DB-88F6820-AMC board

This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass Signed-off-by: Chris Packham

[U-Boot] [PATCH v2 1/3] arm: mvebu: create generic 88F6820 config option

88F6820 is a specific Armada-38x chip that is used on the DB-88F6820-GP board. Rather than having DB_88F6820_GP and TARGET_DB_88F6820_GP which selects the former. Rename DB_88F6820_GP to 88F6820 so that other boards using the 88F6820 can be added. Signed-off-by: Chris Packham

Re: [U-Boot] ad-hoc config error

On 09/21/2016 08:45 AM, Tom Rini wrote: > On Wed, Sep 21, 2016 at 03:22:59PM +, york sun wrote: >> On 09/20/2016 03:30 PM, Tom Rini wrote: >>> On Tue, Sep 20, 2016 at 09:40:00PM +, york sun wrote: On 09/20/2016 02:36 PM, Tom Rini wrote: > On Tue, Sep 20, 2016 at 09:22:09PM +,

[U-Boot] [RFC Patch 0/5] Resolve conflict for merging

Tom, I made these patches on top of my fsl-qoriq master. Once merged, the ad-hoc config error should not appear. In this set, I start to convert some options to Kconfig. Please let me know if this is the right solution. I also convert the MMDC driver to use data structure as you suggested. Do not

[U-Boot] [RFC Patch 2/5] driver: ddr: fsl_mmdc: Pass board parameters through data structure

Instead of using multiple macros, a data structure is used to pass board-specific parameters to MMDC DDR driver. Signed-off-by: York Sun CC: Shengzhou Liu --- board/freescale/ls1012afrdm/ls1012afrdm.c | 18 ++-

Re: [U-Boot] [PATCH v3 1/9] ddr: altera: Configuring SDRAM extra cycles timing parameters

On 09/21/2016 04:25 AM, Chin Liang See wrote: > To enable configuration of sdr.ctrlcfg.extratime1 register which enable > extra clocks for read to write command timing. This is critical to > ensure successful LPDDR2 interface > > Signed-off-by: Chin Liang See > Cc: Marek Vasut

[U-Boot] [RFC Patch 5/5] armv8: ls1046ardb_emmc: Fix a typo in defconfig

It should be EMMC_BOOT instead of CONFIG_EMMC_BOOT. Signed-off-by: York Sun CC: Gong Qianyu --- configs/ls1046ardb_emmc_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/ls1046ardb_emmc_defconfig

[U-Boot] [RFC Patch 3/5] armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021A

Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun CC: Calvin Johnson CC: Prabhakar Kushwaha --- arch/arm/Kconfig | 3 +++

[U-Boot] [RFC Patch 4/5] Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option

Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun CC: Hou Zhiqiang --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 12 arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 - 2 files changed, 12

[U-Boot] [RFC Patch 1/5] armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A

Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun CC: Mingkai Hu CC: Gong Qianyu --- arch/arm/Kconfig | 4 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 ++

Re: [U-Boot] [RFC Patch 4/5] Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig option

On Wed, Sep 21, 2016 at 03:51:17PM -0700, York Sun wrote: > Move this option to Kconfig and clean up existing uses. > > Signed-off-by: York Sun > CC: Hou Zhiqiang Reviewed-by: Tom Rini -- Tom signature.asc Description: Digital

Re: [U-Boot] [RFC Patch 5/5] armv8: ls1046ardb_emmc: Fix a typo in defconfig

On Wed, Sep 21, 2016 at 03:51:18PM -0700, York Sun wrote: > It should be EMMC_BOOT instead of CONFIG_EMMC_BOOT. > > Signed-off-by: York Sun > CC: Gong Qianyu Reviewed-by: Tom Rini -- Tom signature.asc Description: Digital

Re: [U-Boot] [RFC Patch 2/5] driver: ddr: fsl_mmdc: Pass board parameters through data structure

On Wed, Sep 21, 2016 at 03:51:15PM -0700, York Sun wrote: > Instead of using multiple macros, a data structure is used to pass > board-specific parameters to MMDC DDR driver. > > Signed-off-by: York Sun > CC: Shengzhou Liu Thanks for doing this!

Re: [U-Boot] [RFC Patch 3/5] armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021A

On Wed, Sep 21, 2016 at 03:51:16PM -0700, York Sun wrote: > Move this config to Kconfig option and clean up existing uses. > > Signed-off-by: York Sun > CC: Calvin Johnson > CC: Prabhakar Kushwaha Reviewed-by: Tom Rini

Re: [U-Boot] [RFC Patch 1/5] armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046A

On Wed, Sep 21, 2016 at 03:51:14PM -0700, York Sun wrote: > Move this option to Kconfig and clean up existing uses. > > Signed-off-by: York Sun > CC: Mingkai Hu > CC: Gong Qianyu Reviewed-by: Tom Rini -- Tom

[U-Boot] [PATCH 3/5] clk: uniphier: move U_BOOT_DRIVER entry to core code

Move U_BOOT_DRIVER() entry from the data file (clk-uniphier-mio.c) to the core support file (clk-uniphier-core.c) because I do not want to repeat the driver boilerplate when I add more clock data. Signed-off-by: Masahiro Yamada ---

[U-Boot] [PATCH 0/5] ARM: uniphier: UniPhier updates (round 3) for v2016.11-rc1

- Add PLL init code for LD11 SoC - Cleanup clk driver - Sync Device Trees Masahiro Yamada (5): ARM: uniphier: add PLL init code for LD11 SoC clk: uniphier: constify clock data arrays/structures clk: uniphier: move U_BOOT_DRIVER entry to core code clk: uniphier: allow to have clock

[U-Boot] [PATCH 1/5] ARM: uniphier: add PLL init code for LD11 SoC

- Initialize PLLs (SPL initializes only DPLL to save the precious SPL memory footprint) - Adjust CPLL/MPLL to the final tape-out frequency - Accelerate the Cortex-A53 clock to the maximum frequency since it is running at 500MHz (SPLL/4) on startup Signed-off-by: Masahiro Yamada

[U-Boot] [PATCH 5/5] ARM: dts: uniphier: sync clock/reset controller nodes with Linux

Sync device trees with Linux for easier DT life. Signed-off-by: Masahiro Yamada --- arch/arm/dts/uniphier-common32.dtsi | 56 +-- arch/arm/dts/uniphier-ph1-ld11.dtsi | 80

[U-Boot] [PATCH 4/5] clk: uniphier: allow to have clock node under syscon node

To sync the DT binding with Linux, the register base must be taken from the parent syscon node. Signed-off-by: Masahiro Yamada --- drivers/clk/uniphier/clk-uniphier-core.c | 18 +- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git

[U-Boot] [PATCH 2/5] clk: uniphier: constify clock data arrays/structures

Clarify these clock data are constant. Signed-off-by: Masahiro Yamada --- drivers/clk/uniphier/clk-uniphier-core.c | 6 +++--- drivers/clk/uniphier/clk-uniphier-mio.c | 6 +++--- drivers/clk/uniphier/clk-uniphier.h | 6 +++--- 3 files changed, 9

Re: [U-Boot] [RESEND PATCH 04/10] Remove arch/${ARCH}/include/asm/errno.h

2016-09-21 11:28 GMT+09:00 Masahiro Yamada : > Unlike Linux, nothing about errno.h is arch-specific in U-Boot. > As you see, all of arch/${ARCH}/include/asm/errno.h is just a > wrapper of . Actually, U-Boot does not > export headers to user-space, so we just have to

Re: [U-Boot] [PATCH] pwm: add MACRO to limit some code which only for rk3288

Hi, Am Donnerstag, 28. Juli 2016, 21:46:04 schrieb Doug Anderson: > On Mon, Jul 11, 2016 at 7:45 PM, Kever Yang wrote: > > Hi Simon, > > > > CC Doug for this topic. > > > > On 07/12/2016 07:54 AM, Simon Glass wrote: > >> Hi Kever, > >> > >> On 11 July 2016 at

[U-Boot] [PATCH] clk.h: Switch to

Signed-off-by: Tom Rini --- You don't need to issue a new series for just this change, but I had to fix clk.h for today. --- include/clk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/clk.h b/include/clk.h index 94c003714700..5a5c2ff1e674 100644

[U-Boot] [PATCH] clk.h: Add

Since we return -ENOSYS in some cases we must have available. Signed-off-by: Tom Rini --- include/clk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/clk.h b/include/clk.h index 9b2452268d40..94c003714700 100644 --- a/include/clk.h +++ b/include/clk.h @@ -10,6

[U-Boot] [PATCH 2/2] configs: fsl: Move SPI/SPI-FLASH configs to defconfig

From: Jagan Teki Moved FSL_QSPI/SPI/SPI-FLASH configs from include/configs into respective used defconfigs. - CONFIG_FSL_QSPI - CONFIG_SPI_FLASH - CONFIG_SPI_FLASH_BAR - CONFIG_SPI_FLASH_STMICRO Cc: Stefano Babic Cc: Peng Fan

[U-Boot] [PATCH 1/2] spi: Kconfig: Move FSL_QSPI entry to non-dm place

From: Jagan Teki Since FSL_QSPI driver still supporting non-dm code better to move the Kconfig from DM undefined place. Cc: Stefano Babic Cc: Peng Fan Signed-off-by: Jagan Teki --- drivers/spi/Kconfig | 14

Re: [U-Boot] [PATCH v2 0/2] spi: ti_qspi: Increase write speed

On Wed, Sep 7, 2016 at 3:18 PM, Vignesh R wrote: > This patch series tries to improve QSPI write speed by writing 16 bytes > at once whenever possible. Also remove unnecessary 100us delay for > AM437x. > > Tested on AM437x SK, DRA74 and DRA72 EVM. Applied to u-boot-spi/master

Re: [U-Boot] ad-hoc config error

On 09/21/2016 12:01 PM, Tom Rini wrote: > On Wed, Sep 21, 2016 at 04:07:49PM +, york sun wrote: >> On 09/21/2016 08:45 AM, Tom Rini wrote: >>> On Wed, Sep 21, 2016 at 03:22:59PM +, york sun wrote: On 09/20/2016 03:30 PM, Tom Rini wrote: > On Tue, Sep 20, 2016 at 09:40:00PM +,

Re: [U-Boot] ad-hoc config error

On Wed, Sep 21, 2016 at 04:07:49PM +, york sun wrote: > On 09/21/2016 08:45 AM, Tom Rini wrote: > > On Wed, Sep 21, 2016 at 03:22:59PM +, york sun wrote: > >> On 09/20/2016 03:30 PM, Tom Rini wrote: > >>> On Tue, Sep 20, 2016 at 09:40:00PM +, york sun wrote: > On 09/20/2016 02:36

Re: [U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support

Hi York, PCIe couldn't work on ls1046a as the driver code is not updated yet. So I removed the configs from board files. And Minghuan has been working on the PCIe driver patch. Hi Mingkai and Shengzhou, Could you please help on the DDR option question? Thanks. Regards, Qianyu > -Original

[U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips

H3 seems to have a silicon bug breaking the impedance calibration. This is currently worked around in software by multiple steps combining the results to replace the wrong values. Revision A chips need a different workaround, which is present in the vendor bootloader too, but got overlooked in

Re: [U-Boot] ad-hoc config error

On Wed, Sep 21, 2016 at 03:22:59PM +, york sun wrote: > On 09/20/2016 03:30 PM, Tom Rini wrote: > > On Tue, Sep 20, 2016 at 09:40:00PM +, york sun wrote: > >> On 09/20/2016 02:36 PM, Tom Rini wrote: > >>> On Tue, Sep 20, 2016 at 09:22:09PM +, york sun wrote: > >>> > Tom and Simon,

[U-Boot] [GIT PULL] u-boot-mips/master

Hi Tom, this pull-request introduces: - new board: MIPSfpga - new board: Boston with variants for MIPS32r2/MIPS64r2 and BE/LE - updates to DM core code needed for Boston board - support for L2 cache and MIPS coherency manager - various fixes on cache initialization The following changes since

Re: [U-Boot] ad-hoc config error

On 09/20/2016 03:30 PM, Tom Rini wrote: > On Tue, Sep 20, 2016 at 09:40:00PM +, york sun wrote: >> On 09/20/2016 02:36 PM, Tom Rini wrote: >>> On Tue, Sep 20, 2016 at 09:22:09PM +, york sun wrote: >>> Tom and Simon, After commit 371244cb19f9804711dd66e4281ff7979915fd2e, all

Re: [U-Boot] [PATCH] image-fit: Fix fit_get_node_from_config semantics

On Wed, Sep 21, 2016 at 10:15 AM, Stefan Roese wrote: > On 21.09.2016 17:12, Marek Vasut wrote: >> >> On 09/20/2016 07:17 PM, Paul Burton wrote: >>> >>> Commit bac17b78dace ("image-fit: switch ENOLINK to ENOENT") changed >>> fit_get_node_from_config to return -ENOENT when a property

Re: [U-Boot] [Patch v6 8/9] armv8: ls1046ardb: Add LS1046ARDB board support

On 09/21/2016 12:46 AM, Mingkai Hu wrote: > > >> -Original Message- >> From: york sun >> Sent: Saturday, September 17, 2016 4:14 AM >> To: Q.Y. Gong ; u-boot@lists.denx.de >> Cc: Prabhakar Kushwaha ; Mingkai Hu >> ; S.H.

Re: [U-Boot] [PATCH 2/2] PowerPC: Update last users of CONFIG_ISO_STRING to Kconfig

On Mon, Sep 19, 2016 at 10:05:45PM -0400, Tom Rini wrote: > There are a few boards that use CONFIG_ISO_STRING as part of a sanity > check during firmware update at run time. Move this string to Kconfig. > > Signed-off-by: Tom Rini Applied to u-boot/master, thanks! -- Tom

Re: [U-Boot] [U-Boot, 1/3] Kconfig: zynqmp: Move config IDENT_STRING to Kconfig

On Fri, Jul 29, 2016 at 03:31:47PM +0530, Siva Durga Prasad Paladugu wrote: > Move the config IDENT_STRING to Kconfig and migrate all boards > > [sivadur: Migrate zynq boards] > Signed-off-by: Siva Durga Prasad Paladugu > [trini: Update configs, add some default to sunxi

Re: [U-Boot] Please pull u-boot-dm

On Sun, Sep 18, 2016 at 09:09:39PM -0600, Simon Glass wrote: > Hi Tom, > > This includes some refactoring to improve the dtoc code. > > > The following changes since commit 9a6535e05f17acf03e891266a650cb6029124743: > > Merge branch 'master' of git://git.denx.de/u-boot-uniphier > (2016-09-18

Re: [U-Boot] [PATCH 1/2] PowerPC: Update MIP405/MIP405T to use Kconfig better

On Mon, Sep 19, 2016 at 10:05:44PM -0400, Tom Rini wrote: > Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config > > There are two boards, MIP405 and MIP405T that have a few differences. > Start by checking for CONFIG_TARGET_MIP405. Then introduce > CONFIG_TARGET_MIP405T and use that

Re: [U-Boot] [PATCH] image-fit: Fix fit_get_node_from_config semantics

On 21.09.2016 17:12, Marek Vasut wrote: On 09/20/2016 07:17 PM, Paul Burton wrote: Commit bac17b78dace ("image-fit: switch ENOLINK to ENOENT") changed fit_get_node_from_config to return -ENOENT when a property doesn't exist, but didn't change any of its callers which check return values.

Re: [U-Boot] [PATCH] image-fit: Fix fit_get_node_from_config semantics

On 09/20/2016 07:17 PM, Paul Burton wrote: > Commit bac17b78dace ("image-fit: switch ENOLINK to ENOENT") changed > fit_get_node_from_config to return -ENOENT when a property doesn't > exist, but didn't change any of its callers which check return values. > Notably it didn't change

Re: [U-Boot] [PATCH v4] MIPS: Hang if run on a secondary CPU

On Wednesday, 21 September 2016 16:19:58 BST Daniel Schwierzeck wrote: > Am 21.09.2016 um 15:59 schrieb Paul Burton: > > Some systems are configured such that multiple CPUs begin running from > > their reset vector following a system reset. If this occurs then U-Boot > > will be run on multiple

Re: [U-Boot] [PATCH v4] MIPS: Hang if run on a secondary CPU

Am 21.09.2016 um 15:59 schrieb Paul Burton: > Some systems are configured such that multiple CPUs begin running from > their reset vector following a system reset. If this occurs then U-Boot > will be run on multiple CPUs simultaneously, which causes all sorts of > issues as the multiple

Re: [U-Boot] [PATCH v2] MIPS: Hang if run on a secondary CPU

Paul Burton writes: > Some systems are configured such that multiple CPUs begin running from > their reset vector following a system reset. If this occurs then U-Boot > will be run on multiple CPUs simultaneously, which causes all sorts of > issues as the multiple

[U-Boot] [PATCH v4] MIPS: Hang if run on a secondary CPU

Some systems are configured such that multiple CPUs begin running from their reset vector following a system reset. If this occurs then U-Boot will be run on multiple CPUs simultaneously, which causes all sorts of issues as the multiple instances of U-Boot clobber each other. Prevent this from

Re: [U-Boot] [PATCH v2] MIPS: Hang if run on a secondary CPU

On Wednesday, 21 September 2016 14:51:05 BST Matthew Fortune wrote: > Paul Burton writes: > > Some systems are configured such that multiple CPUs begin running from > > their reset vector following a system reset. If this occurs then U-Boot > > will be run on multiple CPUs

[U-Boot] [PATCH] MIPS: Fix boston L2 cache Kconfig selection

The Kconfig entry for L2 cache support is MIPS_L2_CACHE, not MIPS_L2. Fix that. Signed-off-by: Paul Burton --- Feel free to fold this into "boston: Introduce support for the MIPS Boston development board" as it's a minor fixup. arch/mips/Kconfig | 2 +- 1 file changed,

Re: [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs

On Wed, Sep 21, 2016 at 03:46:08PM +0200, Enric Balletbo Serra wrote: > 2016-09-21 14:51 GMT+02:00 Tom Rini : > > On Wed, Sep 21, 2016 at 01:46:51PM +0200, Enric Balletbo Serra wrote: > >> Hi, > >> > >> 2016-09-21 11:39 GMT+02:00 Ladislav Michl : > >> > On

Re: [U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU

On Wednesday, 21 September 2016 15:14:41 BST Daniel Schwierzeck wrote: > Hi Paul, > > Am 21.09.2016 um 12:08 schrieb Paul Burton: > > Some systems are configured such that multiple CPUs begin running from > > their reset vector following a system reset. If this occurs then U-Boot > > will be run

Re: [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs

2016-09-21 14:51 GMT+02:00 Tom Rini : > On Wed, Sep 21, 2016 at 01:46:51PM +0200, Enric Balletbo Serra wrote: >> Hi, >> >> 2016-09-21 11:39 GMT+02:00 Ladislav Michl : >> > On Tue, Sep 20, 2016 at 08:26:36PM -0400, Tom Rini wrote: >> >> On Wed, Sep 21, 2016

[U-Boot] [PATCH v2] MIPS: Hang if run on a secondary CPU

Some systems are configured such that multiple CPUs begin running from their reset vector following a system reset. If this occurs then U-Boot will be run on multiple CPUs simultaneously, which causes all sorts of issues as the multiple instances of U-Boot clobber each other. Prevent this from

Re: [U-Boot] [bug report] sunxi: booting from eMMC

Hi Jaehoon, On Tue, Sep 20, 2016 at 08:10:52AM +0900, Jaehoon Chung wrote: > On 09/19/2016 10:17 PM, Maxime Ripard wrote: > > On Wed, Sep 14, 2016 at 12:05:19PM +0200, Hans de Goede wrote: > >> Hi, > >> > >> On 13-09-16 13:50, Maxime Ripard wrote: > >>> Hi, > >>> > >>> On Mon, Sep 12, 2016 at

Re: [U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU

On Wednesday, 21 September 2016 12:59:39 BST Langer, Thomas wrote: > Hello Paul, > > > diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S > > index fc6dd66..dd37ac3 100644 > > --- a/arch/mips/cpu/start.S > > +++ b/arch/mips/cpu/start.S > > @@ -112,6 +112,31 @@ ENTRY(_start) > > > >

Re: [U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU

Hi Paul, Am 21.09.2016 um 12:08 schrieb Paul Burton: > Some systems are configured such that multiple CPUs begin running from > their reset vector following a system reset. If this occurs then U-Boot > will be run on multiple CPUs simultaneously, which causes all sorts of > issues as the multiple

Re: [U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU

Hello Paul, > > diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S > index fc6dd66..dd37ac3 100644 > --- a/arch/mips/cpu/start.S > +++ b/arch/mips/cpu/start.S > @@ -112,6 +112,31 @@ ENTRY(_start) > > .align 4 > reset: > +#if __mips_isa_rev >= 6 > + .setpush > + .set

Re: [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs

On Wed, Sep 21, 2016 at 01:46:51PM +0200, Enric Balletbo Serra wrote: > Hi, > > 2016-09-21 11:39 GMT+02:00 Ladislav Michl : > > On Tue, Sep 20, 2016 at 08:26:36PM -0400, Tom Rini wrote: > >> On Wed, Sep 21, 2016 at 01:52:21AM +0200, Ladislav Michl wrote: > >> > On Tue, Sep

Re: [U-Boot] [PATCH v2 0/3] Add sdram capacity auto detect for rk3288

On Tue, Sep 20, 2016 at 10:56 PM, Kever Yang wrote: > > parameters changes from dts to auto-detect including those I removed from > dts and ddrconfig, stride, they should be the same as without my patch, > which means my patch suppose to not change any parameter for DDR

Re: [U-Boot] [PATCH v2 1/3] rk3288: config change for enable dram capacity auto-detect.

On Tue, Sep 20, 2016 at 11:00 PM, Kever Yang wrote: > Hi Sandy, > > On 09/20/2016 09:21 PM, Sandy Patterson wrote: > > You're probably going to need to change this around now that the Kconfig > stuff has been applied to master. Suggest following patch instead: > > > I

Re: [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs

Hi, 2016-09-21 11:39 GMT+02:00 Ladislav Michl : > On Tue, Sep 20, 2016 at 08:26:36PM -0400, Tom Rini wrote: >> On Wed, Sep 21, 2016 at 01:52:21AM +0200, Ladislav Michl wrote: >> > On Tue, Sep 20, 2016 at 07:45:14PM -0400, Tom Rini wrote: > [snip] >> > > But why do we even

[U-Boot] [PATCH] board: tbs2910: Fix BOOTMAPSZ

The linux kernel imx_v6_v7_defconfig sets the user/kernel memory split to 3G/1G now (was 2G/2G before). We have to adapt the BOOTMAPSZ so that the decompressor finds zImage and dtb in lowmem. Signed-off-by: Soeren Moch --- Cc: Stefano Babic Cc: u-boot@lists.denx.de

Re: [U-Boot] [PATCH] ARMv7: LS102xA: Move two macros from header files to Kconfig

On Wed, Sep 21, 2016 at 1:31 AM, york sun wrote: > On 09/19/2016 09:59 PM, macro.wav...@gmail.com wrote: >> From: Hongbo Zhang >> >> ARMV7_PSCI depends on ARMV7_NONSEC && ARCH_SUPPORT_PSCI, and ARMV7_NONSEC >> depends on CPU_V7_HAS_NONSEC, LS102XA didn't

[U-Boot] [PATCH v2] ARMv7: LS102xA: Move two macros from header files to Kconfig

From: Hongbo Zhang Following commits 217f92b and 1544698, these two config CPU_V7_HAS_NONSEC and CPU_V7_HAS_VIRT are moved to Kconfig, for correctly select ARMV7_PSCI. Signed-off-by: Hongbo Zhang --- arch/arm/Kconfig | 4

[U-Boot] [PATCH v3 14/14] MIPS: Ensure cache ops complete in mips_cache_reset

Ensure that cache operations complete before returning from mips_cache_reset by placing a completion barrier (sync instruction) before the return. Without this there is no guarantee that the cache ops will complete before any subsequent memory accesses, since they are indexed cache ops & thus not

[U-Boot] [PATCH v3 13/14] MIPS: Clear hazard between TagLo writes & cache ops

Writing to the coprocessor 0 TagLo registers introduces an execution hazard in that we need that write to complete before any cache instructions execute. Ensure that hazard is cleared by inserting an ehb instruction between the TagLo writes & cache op loop. Signed-off-by: Paul Burton

[U-Boot] [PATCH v3 12/14] MIPS: Ensure Config.K0=2 applies before any memory accesses

During boot we set Config.K0=2 (uncached) such that any accesses to the kseg0 memory region are performed uncached before the caches are initialised. This write to the Config register introduces an execution hazard between it & any following memory accesses (such as the load of _gp), which we need

[U-Boot] [PATCH v3 11/14] MIPS: Malta: Enable CM & L2 support

Enable support for the MIPS Coherence Manager & L2 caches on the MIPS Malta board, removing the need for us to attempt to bypass the L2 during boot (which would fail with recent CPUs that expose L2 config via the CM anyway). Signed-off-by: Paul Burton --- Changes in v3:

[U-Boot] [PATCH v3 09/14] MIPS: L2 cache support

This patch adds support for initialising & maintaining L2 caches on MIPS systems. The L2 cache configuration may be advertised through either coprocessor 0 or the MIPS Coherence Manager depending upon the system, and support for both is included. If the L2 can be bypassed then we bypass it early

[U-Boot] [PATCH v3 10/14] MIPS: Join the coherent domain when a CM is present

MIPS Linux expects the bootloader to leave the boot CPU a member of the coherent domain when running on a system with a CM, and we will need to do so if we wish to make use of IOCUs to have cache-coherent DMA in U-Boot (and on some systems there is no choice in that matter). When a CM is present,

[U-Boot] [PATCH v3 08/14] MIPS: Map CM Global Control Registers

Map the Global Control Registers (GCRs) provided by the MIPS Coherence Manager (CM) in preparation for using some of them in later patches. Signed-off-by: Paul Burton --- Changes in v3: None Changes in v2: None arch/mips/Kconfig | 16

[U-Boot] [PATCH v3 07/14] MIPS: Define register names for cache init

Define names for registers holding cache sizes throughout mips_cache_reset, in order to make the code easier to read & allow for changing register assignments more easily. Signed-off-by: Paul Burton --- Changes in v3: None Changes in v2: None arch/mips/lib/cache_init.S

[U-Boot] [PATCH v3 06/14] MIPS: If we don't need DDR for cache init, init cache first

On systems where cache initialisation doesn't require zeroed memory (ie. systems where CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD is not defined) perform cache initialisation prior to lowlevel_init & DDR initialisation. This allows for DDR initialisation code to run cached & thus significantly faster.

[U-Boot] [PATCH v3 03/14] MIPS: Probe cache line sizes once during boot

Rather than probing the cache line sizes on every call of any cache maintenance function, probe them once during boot & store the values in the global data structure for later use. This will reduce the overhead of the cache maintenance functions, which isn't a big deal yet but becomes more

[U-Boot] [PATCH v3 05/14] MIPS: Preserve Config implementation-defined bits

The coprocessor 0 Config register includes 9 implementation defined bits, which in some processors do things like enable write combining or other functionality. We ought not to wipe them to 0 during boot. Rather than doing so, preserve their value & only clear the bits standardised by the MIPS

[U-Boot] [PATCH v3 04/14] MIPS: Enable use of the instruction cache earlier

Enable use of the instruction cache immediately after it has been initialised. This will only take effect if U-Boot was linked to run from kseg0 rather than kseg1, but when this is the case the data cache initialisation code will run cached & thus significantly faster. Signed-off-by: Paul Burton

[U-Boot] [PATCH v3 02/14] MIPS: ath79: Use mach_cpu_init instead of arch_cpu_init

In order to prepare for MIPS arch code making use of arch_cpu_init in a later patch, stop using it from ath79 SoC code & instead use the new mach_cpu_init which is provided for this purpose. Signed-off-by: Paul Burton --- Changes in v3: None Changes in v2: - Rebase atop

[U-Boot] [PATCH v3 01/14] board_f: Add a mach_cpu_init callback

Currently we have a mismash of architectures which use arch_cpu_init from architecture-wide code (arc, avr32, blackfin, mips, nios2, xtensa) and architectures which use arch_cpu_init from machine/SoC level code (arm, x86). In order to clean this mess up & allow for both use cases, introduce a new

[U-Boot] [PATCH v3 00/14] MIPS L2 cache support

This series introduces support for initialising & maintaining L2 caches on MIPS systems. This allows U-Boot to function correctly on systems where such caches are present, whereas without performing L2 maintenance it is likely to fail with cache coherence issues when writing code or performing DMA

[U-Boot] [PATCH] MIPS: Fix cache maintenance in relocate_code & simplify

The relocate_code function was handling cache maintenance incorrectly. It copied U-Boot to its new location, flushed the caches & then proceeded to apply relocations & jump to the new code without flushing the caches again. This is problematic as the instruction cache could potentially have

[U-Boot] [PATCH] MIPS: Hang if run on a secondary CPU

Some systems are configured such that multiple CPUs begin running from their reset vector following a system reset. If this occurs then U-Boot will be run on multiple CPUs simultaneously, which causes all sorts of issues as the multiple instances of U-Boot clobber each other. Prevent this from

Re: [U-Boot] [PATCH] doc: socfpga: Update README.socfpga for Preloader development flow

On 09/21/2016 04:35 AM, Chin Liang See wrote: > Update documentation to include the Cyclone V SoC Preloader > development flow. This include the update of Preloader handoff > through qts-filter.sh script. At same time, removed the SDMMC > documentation as its using DM now. Good stuff .

Re: [U-Boot] [PATCH v2] ddr: altera: Configuring SDRAM extra cycles timing parameters

On 09/21/2016 03:53 AM, Chin Liang See wrote: > On Wed, 2016-09-21 at 03:20 +0200, Marek Vasut wrote: >> On 09/20/2016 08:05 AM, Chin Liang See wrote: >>> To enable configuration of sdr.ctrlcfg.extratime1 register which >>> enable >>> extra clocks for read to write command timing. This is critical

Re: [U-Boot] [PATCH 1/2] usb: host: add Kconfig for USB_XHCI_ROCKCHIP

On 09/21/2016 05:35 AM, Kever Yang wrote: > Add a Kconfig for Rockchip xhci controller. > > Signed-off-by: Kever Yang Acked-by: Marek Vasut Feel free to pick it through rockchip tree . -- Best regards, Marek Vasut

[U-Boot] [PATCH] ARM64: zynqmp: Use the same name for atf image everywhere

Use atf-uboot.ub image instead of atf.ub. Signed-off-by: Michal Simek --- include/configs/xilinx_zynqmp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index

Re: [U-Boot] [PATCH 2/3] igep00x0: consolidate defconfigs

On Tue, Sep 20, 2016 at 08:26:36PM -0400, Tom Rini wrote: > On Wed, Sep 21, 2016 at 01:52:21AM +0200, Ladislav Michl wrote: > > On Tue, Sep 20, 2016 at 07:45:14PM -0400, Tom Rini wrote: [snip] > > > But why do we even need to set MACH_TYPE these days? > > > > That's only needed for non-device

[U-Boot] [PATCH] usb gadget: increase envstr size in cb_getvar

Hi, I propose you this patch in order to take into account strings larger than actual size (32). I recently faced to 'fastboot.partition-type:userdata' (it was in Android context) but this could be the case for other purposes. I propose to simply double the size. Is it ok for you? Regards ---

Re: [U-Boot] [PATCH v10] dm: at91: Add driver model support for the spi driver

On Sun, Sep 18, 2016 at 12:28 PM, Wenyou Yang wrote: > Add driver model support while retaining the existing legacy code. > This allows the driver to support boards that have converted to > driver model as well as those that have not. > > Signed-off-by: Wenyou Yang

[U-Boot] [PATCH] doc: socfpga: Update README.socfpga for Preloader development flow

Update documentation to include the Cyclone V SoC Preloader development flow. This include the update of Preloader handoff through qts-filter.sh script. At same time, removed the SDMMC documentation as its using DM now. Signed-off-by: Chin Liang See Cc: Marek Vasut

Re: [U-Boot] [PATCH 09/15] arm64: mvebu: Armada 3700: Add SPI device tree nodes

On Fri, Sep 16, 2016 at 6:39 PM, Stefan Roese wrote: > This patch adds the SPI device tree nodes that are still missing to > the Armada 3700 dts files. > > Signed-off-by: Stefan Roese > Cc: Nadav Haklai > Cc: Kostya Porotchkin

Re: [U-Boot] [PATCH 02/15] spi: Add driver for Marvell Armada 3700 SoC

On Fri, Sep 16, 2016 at 6:39 PM, Stefan Roese wrote: > The SPI IP core in the Marvell Armada 3700 is similar to the one in the > other Armada SoCs. But the differences are big enough that it makes > sense to introduce a new driver instead of cluttering the old > kirkwood driver with

[U-Boot] Please pull u-boot-mmc

Dear Tom, Could pull these patches on u-boot/master? The following changes since commit 9b1b6d42256a4c2e59c803afdbf90d39371e61ba: Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" (2016-09-19 15:20:09 -0400) are available in the git repository at:

Re: [U-Boot] [PATCH 2/8] Remove arch/${ARCH}/include/asm/errno.h

Hi Masahiro-san, On Wed, 2016-09-21 at 11:01 +0900, Masahiro Yamada wrote: > Unlike Linux, nothing about errno.h is arch-specific in U-Boot. > As you see, all of arch/${ARCH}/include/asm/errno.h is just a > wrapper of .  Actually, U-Boot does not > export headers to user-space, so we just have to

[U-Boot] [PATCH v2] kconfig: introduce kconfig for UBI

move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Andrew F. Davis Reviewed by: Evgeni Dobrev --- Tested with tbot: http://lists.denx.de/pipermail/u-boot/2016-June/258119.html result:

Re: [U-Boot] [RFC PATCH] kconfig: introduce kconfig for UBI

Hello Andrew, Am 20.09.2016 um 17:02 schrieb Tom Rini: On Tue, Sep 20, 2016 at 09:26:15AM -0500, Andrew F. Davis wrote: On 09/20/2016 12:50 AM, Heiko Schocher wrote: Hello Andrew, Am 19.09.2016 um 18:03 schrieb Andrew F. Davis: BTW, the following addresses that bounce should be removed from