bad_boo wrote:
> Thanks for your reply. I tried the IQAudio DAC+ but I get "Squeezelite
> noy running". I believe that means it is not compatible :/
> I'll check LMS if there is something I may have missed.
>
>
You have to press the "Save" Buttons on both the "Audio Output Device"
Settings
These are my settings for the IQAudio Dac+ which I think uses the same
chip:
No other fields filled in below.
I've been using these for ages without any problems and I have three
players in use and a couple more occasionally used.
But I do have DSD Player plugin installed on the LMS server.
Paul Webster wrote:
> I remember the paper tape reader
Can't help one more off topic reminisce:
I remember these. They didn't come close to your tape speeds though. The
paper moved along at 50 bauds and stopped at each traction hole where 5
small steel rods pressed upwards to see if a hole
paul- wrote:
> Ian,
>
> Seems I forgot to include the UTF-8 file system kernel module in the
> latest kernels.
>
> From an ssh session, run
>
> >
Code:
> >
> pcp-update filesystems-KERNEL
>
> >
>
> Sorry about that
>
> Paul
Thanks
I think I've fixed my unrecognised extended characters in LMS scan issue
but I'm not sure how.
I installed the util-linux-locales.tcz extension which I think also
installs util-linux.tcz and the scan started working properly.
However, when I removed the extensions and rebooted the pCp the scan
slartibartfast wrote:
> I had to look that up. The OP wouldn't have the issues he is having
> without the "Carons" [emoji3]
>
> Sent from my Pixel 3a using Tapatalk
It had occurred to me.
*Music Store and VPN Server: *Synology DS215J NAS*
Study Player:* Pi 3B pCp 6.1.0/IQ Audio DAC+
*Study
slartibartfast wrote:
> I saw Pavel Sporcl playing.at the Rudolfinum in Prague with the Wihan
> Quartet in 2013. Tickets were £8.[emoji3]
>
> Sent from my Pixel 3a using Tapatalk
I became interested in classical music late in life and haven't seen
many soloist or small ensemble violinists.
Un corrupted folder scanned by same LMS version on pCp 6.1.0 - test
files sent by PM are recognised.
+---+
|Filename: Un corrupted folder.JPG |
|Download:
Corrupted folder after scan by pCp 7.0.0
+---+
|Filename: Corrupted Folder.JPG |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=32232|
paul- wrote:
> Ian,
>
> Im going to send you a PM with a dropbox request linkif you could
> send me a couple test files. I'll drop on my Synology NAS and check it
> out.
>
> Paul
I've just done a "look for new and changed media scan" with that exact
folder/file structure added to my
Ernestu wrote:
> Exactly the same problem me everything was fine with 6.1
Thanks Ernestu. We'll see if the devs can sort it out.
*Music Store and VPN Server: *Synology DS215J NAS*
Study Player:* Pi 3B pCp 6.1.0/IQ Audio DAC+
*Study Server:* Pi 4 pcp 7.0.0 (beta)
*Refurbished 1962 RCA Stereo
mrw wrote:
> Have you tried explicitly setting -iocharset- as an additional option ?
> I'm thinking -iocharset=utf8- to be appended to the others on your
> network drive set up. Something to try, perhaps.
>
> I'm not a pCP user. Thanks for the suggestion. I tried adding that expression
> to
paul- wrote:
> Yes, but hard to say what is going on at the kernel level. I would ssh
> in and type mount. Look at the mount options on the network drive,
> compare.You could try to install cifs-utils.
>
> BTW, synology should support samba vers=3.0. You might want to check
> your
paul- wrote:
> Yes, but hard to say what is going on at the kernel level. I would ssh
> in and type mount. Look at the mount options on the network drive,
> compare.You could try to install cifs-utils.
>
> BTW, synology should support samba vers=3.0. You might want to check
> your
ian_heys wrote:
> Just did an artist search on the term "Dvoák" on both systems and
> the one the complete track list had 85 more tracks than the one with the
> missing tracks accounting for almost all of them. So it looks like
> there's definitely a character
mrw wrote:
> Well, I don't use pCP, and I don't know what mount options your remote
> file system would have.
>
> I have found, sometimes, that interpretation of file names can depend on
> character set/utf8 options passed at time of mounting, as well as the
> current user locale. And perhaps
mrw wrote:
> Do you have the same mount options for the drive in your pi 3B system
> and your pi 4 system ? I'm thinking in particular of the file name
> character set that is being used.
Hi thanks for replying. I've posted this on the LMS forum at Paul's
suggestion, but to answer your
paul- wrote:
> There are changes being made to the scanning in LMS8, and it was broken.
> There may be other issues. Best to start a thread in the LMS forum and
> post your scanner log.
Thanks paul will do that.
*Music Store and VPN Server: *Synology DS215J NAS*
Study Player:* Pi 3B pCp
carsten_h wrote:
> You can edit your posts, and you can also delete posts. :-)
Thanks for that. I've just deleted a couple of posts which I've
inadvertently posted today.
*Music Store and VPN Server: *Synology DS215J NAS*
Study Player:* Pi 3B pCp 6.1.0/IQ Audio DAC+
*Study Server:* Pi 4 pcp
ian_heys wrote:
>
> Any ideas? Not a show stopper. I know what's happening and how to fix
> it. Just interested as to why it's happened.
I corrected the file names shown in the log and the files were
recognised on the next scan. There are still 119 music tracks missing,
the
ian_heys wrote:
>
>
> Any ideas? Not a show stopper. I know what's happening and how to fix
> it. Just interested as to why it's happened.
I corrected the file names which were noted in the log and the files
were recognised on the next scan but there are still 119 files miss
So much for fancy posts.
This was missing from previous post:
32147
+---+
|Filename: Scan 2.JPG |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=32147|
I have a scanning issue but I'm not sure if it's and LMS issue or a pCp
issue.
I have an existing pi 3B running pcp 6.1.0/LMS 7.9.3 and can scan the
Music files on my Synology NAS
321423214332144
I also have a Pi 4 running pCp 7.0.0/LMS 8.0.0 and scan the SAME music
files I see about 100
paul- wrote:
> As far as turning off the HDMI, the RPI4 does not need any intervention
> to turn off HDMI. Just don't plug in anything.
Thanks Paul, don't have anything plugged in and working fine thanks.
Great work.
*Music Store, LMS Server and VPN Server: *Synology DS215J NAS*
Study
Man in a van wrote:
> Hi Paul
>
> I'm trialling the 7beta on a rpi4b using the 64 bit OS on a usb 2 stick
>
> All seems well at the moment
>
> I can't find
>
> pcp-dsdplay.tcz
>
>
> has it been retired, terminated or furloughed :confused:
>
> Cheers :)
>
> ronnie
DSD's play fine with
Man in a van wrote:
> Hi Paul
>
> I'm trialling the 7beta on a rpi4b using the 64 bit OS on a usb 2 stick
>
> All seems well at the moment
>
> I can't find
>
> pcp-dsdplay.tcz
>
> 32130
>
> has it been retired, terminated or furloughed :confused:
>
> Cheers :)
>
> ronnie
I've just
Thanks, Ralphy, Phillipe and Paul. All working properly again now. The
additional WAV streaming has some advantages too.
Caused me to look closer at my streaming during the investigation and
noticed my tuner output levels were much higher than the codec card
needed.
Have adjusted alsamixer for
Think I forgot to reboot after updating extension yesterday. Now
streaming in WAV format.
Thanks all for the help. Will probably revert to FLAC when that starts
working again but just fine now and my home network is more than able to
carry this traffic.
I live close to a BBC radio transmitter
paul- wrote:
> If you update the streamer extension, ralphy just added the capability
> to stream in Wave format. This will obviously increase the network
> throughput needed, but won't be lossy compression of MP3.
>
> Up to you. I've updated the streamer tcz and tried /W at the end of the
Thanks Paul.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 8.0.0 on Pi 4 pCp 6.1.0 Server/IQ Audio
DAC+
*Refurbished 1962 RCA Stereo Console Server/Player *LMS 8.0.0 on Pi 4B
pCp 6.1.0 Server/IQ Audio DAC+
*Headphone Players: x2:* pCp 6.1.0 on Pi 3B /IQ Audio
Can this codec stream PCM? I've tried P and W at the end of the
streaming URL but neither of these work. PCM streaming would be fine for
me.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 8.0.0 on Pi 4 pCp 6.1.0 Server/IQ Audio
DAC+
*Refurbished 1962 RCA
My IQaudio Codec+ has stopped streaming flac but continues to stream MP3
it's been like this for about a week and I haven't been able to find out
the cause. Flac streams appear to start but are silent and usually stop
after 16 seconds.
I think it might be related to an LMS nightly update but
ian_heys wrote:
> I had a look back through the thread and the in-situ upgrade didn't work
> on the last in-situ either. So will burn a new SD card and report back
> in due course.
That worked fine Paul. I had to install the streamer after booting as
expected. Just wondere
paul- wrote:
> Ian,
>
> Check the tweaks page, make sure the correct input is still listed in
> the streamer section.
I had a look back through the thread and the in-situ upgrade didn't work
on the last in-situ either. So will burn a new SD card and report back
in due course.
*Music Store
paul- wrote:
> Ian,
>
> Check the tweaks page, make sure the correct input is still listed in
> the streamer section.
I'd already done that Paul. Here's a couple of snips from the setup
pages. I also confirmed that card works as a dac by streaming to the
device rather than from it.
I can't get my IQ Audio Flac Stream to work after the latest upgrade.
PCP Streamer Log (Info) shows this:
-Connect: 20200610121404-
-GET /S16_LE/44100/2/F HTTP/1.0-
-Connection: close-
-Cache-Control: no-cache-
-Accept: */*-
-Host: 192.168.0.90:9100-
-User-Agent: iTunes/4.7.1 (Linux; N;
DecTenToo wrote:
> I've set up my Pi with the latest version and have a problem where the
> mount works for a while and then suddenly stops
>
> >
Code:
> > mount -v -t cifs -o username=picore,password=corepi,uid=1001,gid=50
//192.168.1.200/"music" /mnt/music
paul- wrote:
> The meta-data is generated by the tcp server based on what type of input
> you have selected, there is no way to override it.
I was thinking of changing the stream title, but I can have the playlist
title do more or less the same thing. I have a custom icon which I'm
going to
paul- wrote:
> We work with git, so all revision control is tracked. So yes, its
> there. The card seems to lockup if you do things in the wrong order.
>
> What I would do is make sure squeezelite opens the card in 16 bit mode.
> Put a 16 in this box on the squeezelite page.
>
> 29727
Hi
Man in a van wrote:
> Ian
>
> use this to format the cards
>
> /QUOTE]
>
> Thanks Ronnie. I've downloaded that and now that I'm confined to
> barracks I'll have plenty of time to experiment with it over the next
> few weeks.
*Music Store & VPN Server: *Synology DS215J NAS*
Home
paul- wrote:
>
> What I would do is make sure squeezelite opens the card in 16 bit mode.
> Put a 16 in this box on the squeezelite page.
>
> 29727
I'd already set that Paul, but still unable to get the streaming going.
However, I decided to go with a clean 6.0.0 install rather than the
paul- wrote:
> Nothing changed that would have affected that. Make sure squeezelite
> isnt causing conflicts with the recording. I would shutdown
> squeezelite on that device.
I've tried without squeezelite but no joy. I remember that when it
worked it both streamed and played at the same
Hi paul-
I had some time to test streaming on my IQ Audio Codec + today.
I can't seem to get it to stream at all. Seems exactly like it was
before you did the patch update last week.
Is yours OK?
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 8.0.0 on Pi 4
paul- wrote:
> Turning HDMI on during an update is by design. In case there is a boot
> issue, you can connect a monitor.
I was unaware of this and hadn't noticed. I did notice that CPU temp had
risen by 5 degrees when playing a track on a non HDMI player though. Is
there any way that a
Big fan here:
2 x 4B Server/Players IQ Audio DAC+ updated
2 x 3B Players IQ Audio DAC+ updated
1 x 3B Player/Streamer IQ Audio Codec+
All updated without issue.
Thanks everyone.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 8.0.0 on Pi 4 pCp 6.0 (rc)
2959829599
Thank you paul-
+---+
|Filename: 20200301_160434.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29599|
paul- wrote:
> 6.0.0 Release Candidate 1 is posted. See
> https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664
> for details
I have four pCp's
2 x pi 4B Server/Players with IQ Audio DAC+
2 x pi 3B Players with IQ Audio DAC+
All four
chill wrote:
> So don't forget to accept FileZilla's prompt to upload it.
Noted.
And thanks again.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 8.0.0 on Pi 4 pCp 6.0 (beta) Server/IQ
Audio DAC+
*Refurbished 1962 RCA Stereo Console Server/Player *LMS 8.0.0
chill wrote:
> Use 'BBEdit'
> (https://www.barebones.com/support/bbedit/updates.html#up12) (ex
> 'TextWrangler'). The free version is a great full-featured text editor
> that works perfectly with Linux text files such as wpa_supplicant.conf.
> I have it configured as the default text editor
paul- wrote:
> If the card has an eeprom on it, it will load the overlay automatically.
> IQaudio is sending a sample out to me to get it figured out.
I think I'll wait till then. Been sitting here trying everything. but to
no avail. Thanks for all your help so far.
Cheers
Ian
*Music
paul- wrote:
> Ian,
>
> I'm a bit confused as to the sequence of your emailwhen you posted
> the diagnostic output, the output device was clearly there.
>
> hw:CARD=IQaudIOCODEC,DEV=0
>
> You should be able to use that in the squeezelite output setting, and it
> should be fine.If you
Hi Paul
I've had a couple of go's at this, including burning a fresh image of
pCp.
I don't have a problem with the procedures and they seem to be working.
I checked the config.txt had taken by going through the edit config.txt
procedure a second time just to check the the overlay setting was
I found the edit config.txt procedure - will report idc.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 8.0.0 on Pi 4 pCp 6.0 (beta) Server/IQ
Audio DAC+
*Refurbished 1962 RCA Stereo Console Server/Player *LMS 8.0.0 on Pi 4B
pCp 6.0 (beta) Server/IQ Audio DAC+
>From the pCp Diagnostics page:
Output devices:
null - Discard all samples (playback) or
generate zero samples (capture)
default
plugequal
equal
sysdefault:CARD=ALSA - bcm2835 ALSA, bcm2835
paul- wrote:
> Ian,
>
> I've added the needed module to the alsa extensionseasiest way to
> update is to start a shell and run.
>
> pcp-update libasound.tcz
>
> Then reboot. You might manually need to add
>
> dtoverlay=iqaudio-codec
>
> to your config.txt. Until I can get a new
Greg, Yatsushiro
Thanks for replying.
I think I'll wait till Paul finishes, I've tried in the past without
success.
I'm quite familiar with pCp, I have four others, all latest beta.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 8.0.0 on Pi 4 pCp 6.0 (beta)
Today's reply from IQ Audio:
The quicktest image on our download site uses standard raspbian and
includes codec drivers.
Other audio applications may need to update their environments to
include the codec driver - which has been available for 6months plus.
What OS are you trying to use?
ian_heys wrote:
> dmesg and lsmod attached - I hope
Any hope of getting this integrated in pCp.
I note you have been busy releasing an update since I last posted.
I'm thinking of returning it as, despite some effort and contacting the
supplier, I haven't been able to find an
dmesg and lsmod attached - I hope
+---+
|Filename: lsmod.txt|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29289|
paul- wrote:
> We support the hifiberry ADC products. This one might take a little
> work. They are using the HAT eeprom to automatically load drivers, I'm
> not sure we have that mechanism in pCP (Never researched it) But
> there are not new drivers published for the card, so I'm not
Is there any chance of supporting this device in pCp 6.
Just exploring streaming high quality analog audio say FM Tuner, CD
Player, Record Deck etc etc
The streaming seems to be an available feature on the Tweaks page - but
the support for this device isn't there.
Just experimenting.
I know
JulianH wrote:
>
>
> RPI4 is in a small cupboard (sitting on HDD) and running at a cool 45C
> with one of these
>
> https://thepihut.com/products/dual-fan-heatsink-case-for-raspberry-pi-4
>
> Julian
JulianH wrote:
>
> RPI4 is in a small cupboard (sitting on HDD) and running at a cool
paul- wrote:
> With upgraded firmware, the heat is better on the PI4, but I still
> wouldn't put it in a sealed case, it needs some sort of ventilation
Thanks Paul,
Guess I'll put it on the back burner for the time being as the only
problem I have is slow samba transfers from my ripping pc.
Man in a van wrote:
> Ian, I loaded up an IQAudio DAC+ onto a rpi4b (4gb).
>
> ronnie
Thanks for this Ronnie. I haven't bought a pi 4 yet I thought I would
leave it a month or so and then upgrade.
If IQAudio haven't come up with a case by then I may buy something like
the Pimoroni case with
Has anyone used pCP 6.0.0 with an on board DAC. I was thinking in
particular about the heat issues.
I have a remote (from my router/NAS/Home PC) player/server using pCp
5.01 with an IQAudio DAC+ and a SSD music drive attached by USB 2.0.
This works really well including playing a growing
Updated a Server/Player and two players today From 4.1 to 5.0 using the
hotfix/update method.
All seem to working fine. Took about 5 minutes each.
Thanks pcp team.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Study Player:* LMS 7.9.2 on Pi 3B piCorePlayer v4.1
Server/USB
Ralphy I'm using the jivelite joggler skin on an HDMI display.
When operating the top left power button in the home menu (using a
mouse) the button colour remains absolutely unchanged and gives no
indication of whether the player is on or off.
Is this standard behaviour?
It would be great if
Thanks again, the procedure worked fine and re-familiarised me with some
basic terminal commands from years ago.
Very happy, sorry for being unspecific earlier.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v4.0 Server/IQAudio
Digi+
Thanks for all your help.
Looks like I can take it from here.
I have to break for a while but I think I'll be able to do it from here.
Thanks again.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v4.0 Server/IQAudio
Digi+
*Homeplug &
That didn't work either Michael.
I've PM'd Ralphy. Hate to bother him when he does so much for the
community but I have tried.
And of course the same to you too.
Ian
A very happy 13 year user of Slimdevices, Logitech Devices and pi and
UPNP devices.
Keep up the good work.
*Music Store &
I don't seem to be able to ssh in there as root using "sudo /bin/sh".
Still permission denied.
My terminal command usage is very rusty.
Ralphy, if I PM you the png would you mind including it in the list of
VU meters?
Uploading it to this forum seems to change it to a jpg so maybe email
Using either Filezilla or Putty with tc user and piCore password
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v4.0 Server/IQAudio
Digi+
*Homeplug & LAN Players: *Squeezelite on Windows 10 PC
*UPNP Wifi Players:* Samsung Soundbar,
I've created a replacement VU meter animation frieze for the Kolossos VU
meter for my Stereo Console re-purposeing project but keep getting
"permission denied" when trying to upload it to piCore to replace the
Kolossos frieze (suitably renamed). Is it possible to simply replace it
in this way
The main unit's away having the top "French Polished" (don't know how
that translates, particularly into French). It had suffered some usage
marks in it's 56 year history.
The top of the unit is made from two solid walnut panels each about 18mm
thick 1800mm long and 230mm wide. If you had to
Learn't how to do one. The learning took a couple of hours.
25892
Could still stand slight back-lighting improvements but not bad for a
septuagenarian.
Now for the other 24!
+---+
|Filename: base2.png
huxmut wrote:
> Lets us know what you find :)
Thanks for the hint huxmut, I should be able to take it from there.
I found the image file: vu_analog_25seq_w.png at
/opt/jivelite/share/jive/applets/JogglerSkin/images/UNOFFICIAL/VUMeter
which is series collage view of the base image 350 x 400
Thanks Michael,
I'm familiar with the Open Source version of photoshop (GIMP) but I
don't have a starting point or any idea where to put a modified image.
Hope someone familiar with the process might join the thread.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS
Hi
I'm re-purposing/refinishing an enormous RCA solid walnut stereo console
with modern amps, piCore Player/Server and a 13 inch Jivelite Display
Panel with remote.
Is there any way I can change the text in the Kolossos VU meters to Read
"RCA SHC888 Console 1962"?
Did you ever see the film
paul- wrote:
> Ian,
>
> Would you please take a screenshot of your squeezelite page , expand
> the more> by the squeezelite output.
>
> What you are reporting is not what the info on IQAudIOs documentation
> says.
>
> Thanks
I note my neighbour, man in a van has reported something similar,
Tex wrote:
> Smooth Insitu update from 3.5! No problems for the standard audio!
Ditto here, except for error in device name I reported in the 3.5 thread
a few days ago.
Device name should be:
-sysdefault:CARD=IQAudIODigi- (Note the capitalisation of the "A")
not:
-hw:CARD=IQaudIODigi-
I installed this yesterday. I think there was a capitalisation issue in
the automatic assignment of the device name on the squeezelite settings
page.
Working name in my config is:
sysdefault:CARD=IQAudIODigi
Thanks again for this great system.
*Music Store & VPN Server: *Synology DS215J
geiserc wrote:
> @ian_heys - Are you using the IQaudio DAC+ and AMP+ or the all-in-1
> DigiAMP+?
The seperate DAC and Amplfier. Hadn't realised there was an all in one
version.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v3
I use these components in my set up without problem. This is my
squeezelite config page. Hope this helps.
24970
+---+
|Filename: IQAudio.JPG |
|Download:
Updated using procedure - thanks Paul.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.2 on Pi 3B piCorePlayer v3.50
Server/IQAudio DAC+/Amp+
*Homeplug LAN Players: *Squeezelite on Windows 10 PC
*UPNP Wifi Players:* Samsung Soundbar, Chromecast Audio/Video, Revo
paul- wrote:
> Just a reminder if you want to keep getting nighties
An interesting thought for the day.
*Music Store & VPN Server: *Synology DS215J NAS*
Home Server/Player:* LMS 7.9.1 on Pi 3B piCorePlayer v3.50
Server/IQAudio DAC+/Amp+
*Homeplug LAN Players: *Squeezelite on Windows 10 PC
Thanks for info.
Think I'll stay with 7.9.0 it's working so well.
Thanks again for the OS it's fantastic.
LMS: 7.9.0 - 1488878280 @ Wed Mar 8 14:07:50 UTC 2017 on Raspberry Pi 3B
piCorePlayer v3.22 Server/IQAudio DAC+/Amp+/ Synology DS216J Network
Music Store
*Homeplug LAN Players:*
paul- wrote:
> The pCP team is pleased to announce piCorePlayer 3.22
>
>
> NOTE:
>
> > > >
- LMS in repo updated to Logitech Media Server Version: 7.9.1 -
> 1505480690
> > >
>
Updated to 3.22 without issue on two pi3B's but can't update LMS it
fails in both the PCP gui and
I've been using the GGMM-E5 portable player in conjunction with
Phillipe's UPNP plugin. It works as a reasonable looking/sounding,
battery powered player (like a Bose speaker) any where in range of your
home wifi. I started thinking of trying to do what you are doing but
this device is much more
I now have a NowTV remote config for Flirc dongle which I find very
useful.
File attached. Needs renaming to NowTV.fcfg.
23499
It has full Navigation Keys, Volume Up, Volume Down, Play/Pause,
Home/NowPlaying, Power, Shuffle and Repeat keys.
If anyone's interested.
As posted below it only
Paul Webster wrote:
> I think that Max2play has CEC support in their build.
>
> The benefit is one less remote to hunt for.
I do have an unused Max2Play licence and my TV HDMI is CEC enabled. But
I don't have the time to experiment I'm afraid. I'll watch with interest
and see where this goes.
Paul Webster wrote:
> Should not need further customisation because CEC standardises the keys.
> I.e. the CEC protocol says something like "Play was pressed" etc
Thanks for that. It could be of interest then but comparison of features
against say a keyboard would need some investigation from my
streampunk wrote:
> Well, basically it works this way:
> ...
> Regards
> Martin
Thanks Martin, I don't think I'm a candidate for a CEC plugin at the
moment as I'm getting complete control from my PC keyboard.
One thought comes to mind:
If PiCore could recognise CEC signals would there
ian_heys wrote:
> Thanks Jeff, - but the light hadn't dawned.
More light dawning. No doubt you know this Jeff but if I plug in my
wireless keyboard dongle and use my wireless keyboard - Bingo - Full
control, rapid menu scrolling and alphanumeric searching. One small
price to pay is hav
streampunk wrote:
> Ian, if you use PCP on a Raspi, you might be another candidate for a
> possible HDMI-CEC integration making use of the Pi's integrated CEC
> functionality. So you could use the very same remote for jivelite that
> you are using for the TV the Pi is attached to - see my
Jeff07971 wrote:
> Just an FYI, You don't need Lirc if you use a Flirc, Flircs appear as a
> keyboard would to a Pi
Thanks Jeff, I knew I was changing the firmware in the FLIRC device when
I programmed it in my Windows PC and wondered why it always worked with
the Pi - but the light hadn't
I hadn't considered using jivelite on my picore until recently.
I installed on V3.21 without problem and then considered remote control.
I installed lirc again without problem and set the jivelite output to
hidraw1 (HDMI).
I bought a FLIRC dongle and had some success pairing it with a NowTV
Updated to two instances of 3.21 both without incident so far.
I have:
IQ Audio Amp+/Dac+ combo with 3.21 squeezelite and LMS on Pi 3
Topping VX2 Dac/Amp with 3.21 squeezelite only on pi3
Keep up the good work.
LMS: 7.9.0 - 1488878280 @ Tue Mar 7 09:28:02 UTC 2017 on Raspberry Pi 3B
Does anyone know how to set up squeezelite to get this combination to
work.
DAC seems to work but can't unmute the amp.
Thanks
LMS: 7.9.0 - 1488878280 @ Tue Mar 7 09:28:02 UTC 2017 on Raspberry Pi 3B
piCorePlayer v3.20 Server/ARCAM rPAC DAC, 2.5 inch HD (pi powered)
*Homeplug LAN Players:*
Finally up and running on Pi3B server/player with Arcam rPac external
DAC and player with Topping VX2 external DAC/Amp. No issues, don't use
wifi.
During the transition:
1.The SD card latch on my old Pi2B player finally gave up the ghost and
had to get a Pi3B replacement. Considered using
epoch1970 wrote:
> I am done with it.
That's good enough for me. Glad I didn't start.
It's fantastic that this forum generates so many diverse functions and
facilities.
Personally I haven't had any SlimDevices/Logitech products for at least
two years but the infrastructure is so good, thanks
1 - 100 of 163 matches
Mail list logo
