If you will use modems, you just need an activated SIM for each of the
modems and configure kannel accordingly.
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquie
How do you "see" the response of the +CREG command?
Do you manually parse the bb log?
Regards
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Next
Alex
I do not have experience with ethernet modems but with
terminal/console servers. I've tested in Lan environement with no
problems. I did also do some successfully tests in a Wan environement
but with low traffic.
I remember someone (Elton Hoxha?) on the list that was trying to make
them work
post your dlr-url
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y
Hi
Always copy the userlist. You migh have more help.
What is your modem config?
add +cmee=1 or 2 to your init-string to get more detailed error log
|-|
Envíe y Reciba Datos y mensaje
maybe "Offers (9696)" ?
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
I had this problem also and after many unsuccessfully tries and
retries, I decided to handle the arrival time of the MO in my app -I
replace TS from kannel with my server local time-. In addition, as my
server is in sync with a ntp server, and all my time logs settings are
based on my time, I can s
search the mailing list, there are several threads about them.
in any case post relevant info/logs we can not do anything with no info
Regards
Alvaro
|-|
Envíe y Reciba Datos y mensaje
Hi
You can use vwdial config option to have it search for the modem and
test some basic init-strings.
use
# wvdialconf wvdial.conf
It will scan all available ports/speeds and will try to fecth a basic
config. With
the info gathered, you can test a manual connection with minicom and
if it works
aud, next try: 9600 baud
> ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
> ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>
>
> What might be the problem? Any idea?
>
>
> On 23.06.2010 17:35, Alvaro Cornejo wrote:
&
Maybe you can doit with sqlbox???
If I do remember well, sqlbox has an option where you can configure how many
messages get per loop it sends to bb. You can connect 2 sqlboxes each with a
different number of messages per loop/query
??
Regards
Alvaro
|---
You might want to use sqlbox for that:
- Adjust sqlbox to bb throughput to the total allowed by your
operator, (patch to sqlbox might be needed... Alex?)
- Configure allow/denied/preferred as needed on each smsc
- Do not add throtling per smsc
- Let kannel do the loadbalancing by itself. It will s
does throttling doesnt
> know whats the real status
> Regards,
> Konstantin
> On Fri, Jun 25, 2010 at 5:32 PM, Alvaro Cornejo
> wrote:
>>
>> You might want to use sqlbox for that:
>>
>> - Adjust sqlbox to bb throughput to the total allowed by your
>>
Kannel machine can't open the requested URL
- Check firewall & routing config in both machines. Test to manual
fetch the url from kannel machine.
- you need to URL encode the dlr-url when sending it to kannel
Home helps
Regards
Alvaro
|--
Do not spam list
Search the mailing list. There are some threads about it
Regards
Alvaro
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en
Which "yourpassword" are you usring to send the message to kannel? You
must use sendsms-user password when calling kannel.
Regards
Alvaro
|-|
Envíe y Reciba Datos y mensajes de Texto (
Post config and full debug logs
Read users guide on how to initialize/configure the modem
test with minicom or vwdial modem conectivity
Regards
Alvaro
|-|
Envíe y Reciba Datos y men
e no,text.
> if possible please elaborate the process of calling kannel that u
> mentioned in previous mail.
>
>
>
> On 6/30/10, Alvaro Cornejo wrote:
>> Which "yourpassword" are you usring to send the message to kannel? You
>> must use sends
gt;
>
> Telephone number:
>
>
>
>
> Message:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Back to
> admin
> Visit the Kannel homepage at href="(URL address blocked: See forums rules)">(URL address blocked: See
>
ot;.$myline."";
> }
> }
> fclose ($connection);
>
> }
> }
>
> function octstr_append_cstr($mystring)
> {
> for($pos=0;$pos $mystring2 .= sprintf("%%%02x",$mystring[$pos]);
> }
> return ($mystring2);
> }
> ?>
>
>
&g
What is the send-sms service port defined? in your call you are using
13131... default is 13013
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Next
There are some init scripts in contrib folder.
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use
The user you use to run kannel must have write permissions to the device.
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México
add &smsc= in the url where xxx is the smsc you want the message
to be sent through
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el
Hi
Kannel works with GSM modems not CDMA, however you can patch kannel and do a
driver with specific CDMA commads. take a look at smsc_at.c it is the GSM
modem driver
Regards
Alvaro
|-
Hi
There seems to be a "known bug" somewhere in the queue management. Under
some circumstances, messages start getting queued in kannel queue and are
not released until kannel is restarted. Restarting only an smsc does not
freeup those messages.
I've been trying to best pin-point this but was not
ock is removed? Like restarting a stopped smsc? Or
> they start accumulating out of the blue with nothing wrong?
>
> BR,
> Nikos
> - Original Message - From: Alvaro Cornejo
> To: Nikos Balkanas
> Cc: sangprabv ; Kannel list
> Sent: Thursday, July 22, 2010 4:49 PM
>
com> wrote:
> on a standard install using default diretories, where does that file
> reside? have looked - cannot find it ... thanks ~Rich
>
>
>
>
> On Thu, 22 Jul 2010 08:43:50 -0500
> Alvaro Cornejo wrote:
>
> > Hi
> >
> > Kannel works with GSM mod
Hi All
Does anyone has experience connecting to movistar Mexico. They send us
their doc stating they use smpp 3.4 but no more info yet.
Any tip with them?
Regards
Alvaro
|-|
Envíe y
--
> From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf
> Of Alvaro Cornejo
> Sent: Wednesday, 04 August, 2010 16:34
> To: users
> Subject: Smpp with movistar Mexico
>
> Hi All
>
> Does anyone has experience connecting to movistar Mexico. They send
Hi
You have a 3rd option: Do nothing on either boxes but do it on your
own application that feed sms to opensmppbox.
I do something like that by parsing the bearerbox status page and
getting each smsc queue.
If you do mess with either box, you will be brancing off
kannel/opensmppbox and will not
You need a linux usb drive appropiate for your phone
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paise
Please post logs at debug level
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2
Hi
Does the bearerbox smsbox is automatically started up at bootup?
what is the result of
service kannel status before and after rebooting?
Regards
Alvaro
|-|
Envíe y Reciba Datos y
check dlr type you ask for on each message. use 31 to get all dlrs available
Read manual for details
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y
You should ask this to your esme or smpp client
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use
Hi
I think you have not things clear yet. Please read the user guide.
There is no kannel version 3.4, the latest version is 1.4.3 plus the svn...
However kannel supports SMPP versions 3.3 and 3.4...
Regards
|
Hi
Kannel already has support for AT commands for sending/receiving sms
as well as modem initialization.
What exactly want you to do?
Regards
Alvaro
|-|
Envíe y Reciba Datos y mensaje
Note that is your sms provider/operator smsc who finally takes care of
messages. If Kannel send messages in 1,2,3 order to the smsc it
doesn't mean they will arrive in that order to your phone.
|--
Hi
You should post this in huawei forums, not kannel's;
However, you can get the AT command reference for your modem. If not
available, you can choose any other AT GSM command reference manual
you can find. AT GSM Commands is a standard protocol --eventhough each
vendor has some variants and spec
Hi Brett
Then you should look at a per SMSC queue. Not all SMSCs have the same
thoughput. I do have AT and SMPP smsc's so the later is by far faster
so the same queue size behaves different for each smsc.
I do parse the admin page for getting each smsc's queue using the same
xml parser that uses
ce in the same way as it take care of messages with different
> priority. Can anyone suggest the solution to solve this problem? I want that
> Kannel work like FIFO queue.
> Also tell me if we use sms.time field of message then can we solve this
> problem? because arrival time of messages having
ing
> gateway-1.4.3/test/drive_smpp. Please guide me.
>
>
> ________
> From: Alvaro Cornejo
> To: adil nazir
> Cc: users@kannel.org
> Sent: Tue, August 17, 2010 11:49:01 PM
> Subject: Re: Problem of messages with same priority
>
> There is n
The error message is self expalnatory
error 98: Address already in use
means that bb address/port is in use either by another bb instance or
by other application
use
netstat an | grep 13000
to see if you find it
Regards
Alvaro
|--
king. even i am
> unable to detect that which function is dealing with which queue. So please
> sir guide i am very much confused and i have to urgent solve this problem.
>
>
>
> From: Rene Kluwen
> To: adil nazir ; Alvaro Cornejo
>
>
riginal Message - From: "Rene Kluwen"
> To: "'Alvaro Cornejo'" ; "'adil nazir'"
>
> Cc:
> Sent: Wednesday, August 18, 2010 11:46 PM
> Subject: RE: Problem of messages comes first in Bearerbox Queue
>
>
> True.
>
&g
It ll be good if you can provide some numbers of your client
throughput and server specs so we can have something to compare to.
Also maybe a top capture during stalls and out if it??
|
If you do have setup kannel to store the messages on a file or store,
you wont loose any message. You will if you do use "internal storage"
that is held in RAM
|-|
Envíe y Reciba Datos
Irfan
For such things it is quite better to send all messages to only one
script --in the language of your choice-- where you can
parse/split/sort or whatever mods you want to do with the MO.
It also lets you change it without the need to restart kannel.
Regards
|--
set log-level to 0 and post logs
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2
Some Nokia phones does not support CNMI command. If that is your case,
you can try Nikos solution otherwise... change your phone for another
brand or look for a GSM modem
|-|
Envíe y Re
the list at
>> users-ow...@kannel.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. RE: SMS receive not working with n
Hi
As noted by Nikos, many operators do not send any dlr back to phone
numbers, so it might be OK not to have any dlr from you operator.
In this case, the "only" dlr you will receive is the one generated by
kannel saying that it has sent the message to the smsc and it --the
smsc-- received the s
You need kannel + mbuni to do that
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicacione
Hi
There is no sign of a dlr comming from the modem; so kannel can't do
anything about it. You might need to tweak modem init in order to be
sure dlr are forwarded to kannel.
You shutdown kannel just 2 minutes after sending the MT. It might take
a while to receive the dlr from your operator.
Als
Hi
You need to initialize your modem to fwd MO to kannel (CNMI command)
or tell kannel to look for them (sim-buffering)
Check user guide for details
Regards
Alvaro
|-|
Envíe y Reciba
Hi
If you do need help for kannel; subscribe to list. Do not address
directly to a specific list member. You will have much better support
from many people than just me.
after the ./configure you need to run
make
make install
where are you getting stuck?
Regards
|---
It is recommended that you use latest version and compile it youself.
RPM are normally outdated and doesn't include fixes or updates.
It will give you the option to use whatever DB you want.
SVN version is production quality.
Regards
Alvaro
|-
It is recommended that you use latest version and compile it youself.
RPM are normally outdated and doesn't include fixes or updates.
It will give you the option to use whatever DB you want.
SVN version is production quality.
Regards
Alvaro
|-
depending on the rpm, you might or not have support for mysql.
In case it does, kannel uses for dlr handling. It does not permanently
store messages, so you need to build that by yourself. You can use
sqlbox plugin for DB long term message store and for feeding/receiving
MT/MO to/from kannel
Rega
It is the expected behaviour.
What you set in config file are the instructions on how kannel should
"format" each meta-data parameter when send it through smpp. As those
are optional/special parameters not defined in kannel it need to add
or not that parameter on a per message/per connection basis
Try to use meta-data
Check user guide for details.
However I don't know if kannel allows you to send a "blanc" message.
ie no data in short_message parameter
Regards
Alvaro
|-|
Envíe
no, you must use svn version. it is however production quality
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de
Basically it is a charset interpretation...
Kannel uses UTF-8 internally and spects to receive UTF-8. so it
interprets anything in UTF-8 unless you tell kannel that the charset
is not utf-8 but X. Therefore you need to configure your client to
send utf-8 to kannel or to send the charset it uses to
Have you checked what does the system logs in debug mode?
Regarding the queue, there is a tool created by Alejandro Guerreri
that allows you to view the queue content and delete messages... well
kannel does have several queues, so I don't know if it does wirk for
the one you mention. I don't remem
Set different logfiles for each smsc.
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicacio
subscribe int playsms list. This is a kannel list.
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises.
Post your kannel related questions in kannel list and you will receive
--hopefully ;D -- support from many people
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualqu
What is your smsc log? Did you see a submit or response pdu? Else does
you message is shown in kannels queue? check the admin interface.
You can add a log-file for your smsc so you can have its log separated
from the rest.
|-
for all your help!
>
>
>
> \Peter
>
> _
> Peter Mohr
> Partner
>
> Mobile: +45 3162 1290
>
> Mobility Architects
> www.mobilityarchitects.com
>
> Mobility Architects hjælper nogle af Danmarks største organisationer og
> virksomheder me
t; Ps. The parameter was "smsc-id" and not "smsc-is" :-)
> _____
> Peter Mohr
> Partner
>
> Mobile: +45 3162 1290
>
> Mobility Architects
> www.mobilityarchitects.com
>
> Mobility Architects hjælper nogle af Danmarks største organisati
010-09-15 18:15:11 [9232] [3] INFO: sendsms sender:
> (10.2.1.27) to:<31621290> msg:
> 2010-09-15 18:15:11 [9232] [3] DEBUG: message length 11, sending 1 messages
> 2010-09-15 18:15:11 [9232] [3] DEBUG: Status: 202 Answer:
> 2010-09-15 18:15:11 [9232] [3] DEBUG: HTTP: Destroying HTTPClient
you need to add your own different id to each of your messages in the
dlr-url you send with the message.
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celul
Hi
There is nothing you can do for that other than be sure kannel and
your link is up, working, and not overloadad with MTs.
>From the MO point of view, kannel is a server and it is waiting for
MOs. Kannel has no way to "ask" the smsc if there are MOs pending.
If the delay is in bearerbox in se
How it works is, once kannel receives a dlr, it matches against its
dlr database, if got a macth, it then calls your own dlr-url to
trigger your own application so you can reccord the status and do
whatever you want with it. If the dlr is for a final status, the
kannel deletes that dlr reccord.
Wi
If you are going to change this frequently, It would be better if you
do send all MO to an specific script and have that script do whatever
you want to. This way you don't need to restart kannel each time you
make a modification or add a new keyword.
|--
Hi
You need to install devel libs for mysql, not only the libs itself
Regarding your kannel.conf, you can use the same you use from the rpm
or youcan use one from the contrib folder or just create one from
scrtach. It is a mere text file. See userguide for details.
Hope helps
|--
post config and logs of kannel
you might need to add smsc=Your_smsc_id in your call to sendsms
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nexte
It mostly depends on your provider.
I have 2 providers with one I get about 48sms/min and with the other
about 56/min maximum rates. It can be lower depending on cell load,
modem you use, etc.
|--
Hi
Add log-file= and log-level=0 to your smsc=at group and post logs.
Might me you have either 2 kannel session running or the user that
runs the init script does not have enough privileges to write to the
ttyS0 device.
Regards
Alvaro
|---
Hi Jorge
Always copy kannel lists. This way you can have support from more
people and you help others with similar problems.
Yes, you need that the user you use to run kannel have write
permissions to your devices; dev/ttyS0 in your case. In ubuntu it is
"dialup" group in fedora it "uucp" I think
Hi
Kannel will automagically call any script you define for each received
message; so it is up to your app to do whatever you want with it.
Check userguide for get-url get-exec details
Regards
|
Hi,
Not all operators provides dlr to phones.
You can try the following:
Put your sim into a phone.
Config it so it request confirmation when sending an sms.
send an sms to another phone.
If you do get a message back saying that the message was delivered;
then your provider provides dlr else it
Hi
Good to know you are on the right way.
1) It is the host/port of the webserver that hosts your script
2) You set have any path you want. However it MUST be accesible by
your webserver
3) You don't need to specify the values; just the variables, Kannel,
when calling your url, will replace the va
Kannel uses UTF-8 charset by default; you should need to tell kannel
to use an specific charset using any of the option kannel provides, or
send it in UCS2 format. In this case you will have space for about 70
chars per message.
Also, you need to urlencode your text before sending to sendsms
Chec
Not directly with kannel but through a command line util like minicom
You can try:
ATDT#672#user's phone number#amount
then press enter.
Hope helps
Regards
|-|
Envíe y Reciba Datos
Don't know the fuson modem but you can set the keep-alive config for
your modem. Check guide for details
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celul
Hi
If your provide those services by sms you can send the message through
sendsms and capture the MO when received with a keyword accordingly to
the message wording.
Regards
|-|
Envíe
Kannel uses "drivers" to talk to smsc's. The main drivers it has is
SMPP and AT commands. If your modem suports it you just need to
configure kannel with the specific driver for your equipment.
The TC35 is(was?) a serial modem. So you should be able to connect to
it with the AT driver. However I d
I think you are mixing things
...cgi-bin/sendsms is for sending MT messages therefore it needs a
minimal set of arguments to send the MT or SMS Messages. At least
destination number and message, in its own format as per the user
guide.
the dlr-url that clickatell needs to call is an script of you
he manufacture that I can send a sms via terminal with
> at$smssend=,””,””
>
> for example: at$smssend=1,”+43660303030”,”Hello here I am!”
>
> regards
> Martin
>
>
> -Ursprüngliche Nachricht-
> Von: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com]
> Gesende
AT2[/dev/ttyS1]: closing device
>
> On this comsat device I don’t need a PIN because its already configured so
> the comsat device "manager" setup the two Siemens modems so I can talk to
> them without any need of a PIN or something like that.
>
> Regards Martin
>
>
www.smsglobal.com.mx y
www.pravcom.com
On Wed, Oct 6, 2010 at 3:48 PM, Martin wrote:
> Thanks you very much, Alvaro Cornejo, for the hint about the PIN which is
> now disabled and I think I've configured nearly everything I need.
> But if I understand kannel correct I should be able
ly to the main board
> with this AT commands and not directly with one of the two TC35 modules.
> The TC35i are no boxes - they are industrial style - no power or rs232 plug
> only pcb with flat cable and antenna so I think its not possible to
> disasamble the comsat device for o
Hi Mac
As a way to thank the list, please share your config and most
important steps you take so others can benefit as well.
Regards
Alvaro
|-|
Envíe y Reciba Datos y mensajes de Tex
Hi
You do not send a wap page. With wap you do send an URL to your phone
so when you receive the wap message, your phone retrieves the content
or displays the page.
Alvaro
|-|
Envíe y R
without logs difficult to help, but it can be a charset issue?
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de
You have not defined a storage for your queue, thus it is being build
in memory and as stated in your 1st mail, you are running out of
memory.
Try to setup the store type to file and see what happens. This will
also let you keep the messages in queue if kannel or the server
crashed or if you need
The init script is not installed by default since it depends on linux
flavour. You can find some examples in contrib folder on sources.
Regards
|-|
Envíe y Reciba Datos y mensajes de T
Excellent news
Big Applauses for the ENTIRE DEVEL TEAM, as well as all "back-stage"
devels & supporters
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celul
1 - 100 of 1134 matches
Mail list logo