PROTECTED] wrote:
Hello!
I would like to ask for some help!
I have succesfully installed chkuser 2.0.9 on a clean Netqmail-1.05 without
any problem.
After make and setup, it works fine!
But if I first install qmail-smtpd-auth-0.59 patch on a clean
Netqmail-1.05
Kis Peter ha scritto:
Thanks.
I tried this way.
Fist I applied qmail-smtpd-auth-059 patch,
then I applied chkuser-2.0.9 manually,as seen at
http://www.interazioni.it/opensource/chkuser/documentation/installation/manual.html
See result below.
./compile chkuser.c
./load qmail-smtpd chkuser.o
.
I tried this way.
Fist I applied qmail-smtpd-auth-059 patch,
then I applied chkuser-2.0.9 manually,as seen at
http://www.interazioni.it/opensource/chkuser/documentation/installation/manual.html
See result below.
./compile chkuser.c
./load qmail-smtpd chkuser.o dns.o
Thanks.
I tried this way.
Fist I applied qmail-smtpd-auth-059 patch,
then I applied chkuser-2.0.9 manually,as seen at
http://www.interazioni.it/opensource/chkuser/documentation/installation/manual.html
See result below.
./compile chkuser.c
./load qmail-smtpd chkuser.o dns.o rcpthosts.o
!
I would like to ask for some help!
I have succesfully installed chkuser 2.0.9 on a clean Netqmail-1.05 without
any problem.
After make and setup, it works fine!
But if I first install qmail-smtpd-auth-0.59 patch on a clean
Netqmail-1.05, then
I try
qmail-smtpd-auth-0.59 patch on a clean
Netqmail-1.05, then
I try to install Chkuser 2.0.9, I got lot of error messages.
Chkuser 2.0 patch installation fails.
See output below.
# patch ./chkuser-2.0.9-release.patch
patching file CHKUSER.automatic_patching
patching file
!
But if I first install qmail-smtpd-auth-0.59 patch on a clean
Netqmail-1.05, then
I try to install Chkuser 2.0.9, I got lot of error messages.
Chkuser 2.0 patch installation fails.
See output below.
# patch ./chkuser-2.0.9-release.patch
patching file CHKUSER.automatic_patching
Hello!
I would like to ask for some help!
I have succesfully installed chkuser 2.0.9 on a clean Netqmail-1.05 without any
problem.
After make and setup, it works fine!
But if I first install qmail-smtpd-auth-0.59 patch on a clean
Netqmail-1.05, then
I try to install Chkuser 2.0.9, I got
on a clean Netqmail-1.05
without any problem.
After make and setup, it works fine!
But if I first install qmail-smtpd-auth-0.59 patch on a clean
Netqmail-1.05, then
I try to install Chkuser 2.0.9, I got lot of error messages.
Chkuser 2.0 patch installation fails.
See output below.
# patch
http://www.phdcomputing.net/
Bulent Kolay wrote:
Hello
I use vpopmail5.4 on qmail-1.03.
I patched qmail-smtpd-auth.0.5.6 on vpopmail5.4.
I want to use qmail-spf.patch on the same server but I get a conflict while
patching.
How can I patch both of them ?
Hello
I use vpopmail5.4 on qmail-1.03.
I patched qmail-smtpd-auth.0.5.6 on
vpopmail5.4.
I want to use qmail-spf.patch on the same server
but I get a conflict while patching.
How can I patch both ?
Hello
I use vpopmail5.4 on qmail-1.03.
I patched qmail-smtpd-auth.0.5.6 on vpopmail5.4.
I want to use qmail-spf.patch on the same server but I get a conflict while
patching.
How can I patch both of them ?
On Wed, November 24, 2004 9:32 pm, Casey Allen Shobe said:
Upon restarting services, I've found that bincimap authenticates okay, and
qmail-send delivers mail... However qmail-smtpd cannot authenticate
And neither qmailadmin. So imap and mail delivery work, but qmailadmin
and smtp auth don't.
On Nov 25, 2004, at 5:06 AM, Casey Allen Shobe wrote:
On Wed, November 24, 2004 9:32 pm, Casey Allen Shobe said:
Upon restarting services, I've found that bincimap authenticates
okay, and
qmail-send delivers mail... However qmail-smtpd cannot authenticate
And neither qmailadmin. So imap and
On Thu, November 25, 2004 9:50 am, Tom Collins said:
What are the permissions on qmailadmin?
-rwsr-sr-x1 vpopmail vchkpw 438385 Aug 26 09:53 qmailadmin
Mine was not ug+s, but that would not have changed. I went ahead and
chmoded it so that it looked identical to yours, however logins
On Nov 24, 2004, at 9:32 PM, Casey Allen Shobe wrote:
find / -group 1004 -print0 | xargs -0 chown 89
I assume you meant chgrp 89.
I don't know how a typical Gentoo install handles ownership. On my
install, qmail-smtpd runs as the vpopmail user.
If qmail-smtpd can't run vhckpw, it can't
On Thu, November 25, 2004 11:38 am, Tom Collins said:
On Nov 24, 2004, at 9:32 PM, Casey Allen Shobe wrote:
find / -group 1004 -print0 | xargs -0 chown 89
I assume you meant chgrp 89.
You are correct, I typoed when typing the email, not the actual command.
To verify, I have ensure that there
On Thu, November 25, 2004 11:02 am, Casey Allen Shobe said:
On Thu, November 25, 2004 9:50 am, Tom Collins said:
What are the permissions on qmailadmin?
-rwsr-sr-x1 vpopmail vchkpw 438385 Aug 26 09:53 qmailadmin
Mine was not ug+s, but that would not have changed. I went ahead and
Hi,
At 11:02 25.11.04 -0800, Casey Allen Shobe wrote:
On Thu, November 25, 2004 9:50 am, Tom Collins said:
What are the permissions on qmailadmin?
-rwsr-sr-x1 vpopmail vchkpw 438385 Aug 26 09:53 qmailadmin
Mine was not ug+s, but that would not have changed. I went ahead and
chmoded it
On Thu, November 25, 2004 1:33 pm, Erwin Hoffmann said:
with the standard SMTP-Auth patch (I don't know which is included in your
Gentoo patch) you don't need the hostname in the call of the PAM.
Check man qmail-smtpd and read my
http://www.fehcom.de/qmail/smtpauth.html
Heavy reading..poked
Hi guys,
I had qmail-smtp/smtpauth (standard Gentoo install) working fine with
vchkpw previously.
I then decided that I needed to change the user ID for vpopmail to get a
suexec script working as the vpopmail user...
So I stopped qmail, changed the UID and GID from 89 to 1004, and did:
find /
Hi guys,
I had qmail-smtp/smtpauth (standard Gentoo install) working fine with
vchkpw previously.
I then decided that I needed to change the user ID for vpopmail to get a
suexec script working as the vpopmail user...
So I stopped qmail, changed the UID and GID from 89 to 1004, and did: find
/
On Nov 24, 2004, at 8:33 PM, Casey Allen Shobe wrote:
Could anyone advise me as to what might be going wrong here? Your
help is
greatly appreciated!
Go through /var/qmail/users/assign and update the user and group of
every entry to match the new user/group for vpopmail. Run qmail-newu
so it
On Wed, November 24, 2004 10:20 pm, Tom Collins said:
Go through /var/qmail/users/assign and update the user and group of
every entry to match the new user/group for vpopmail. Run qmail-newu
so it rebuilds the users/cdb file.
This looks fine. All uids and gids are 89, which is what I changed
On Saturday 02 October 2004 04:52 pm, Fernando Milovich wrote:
I have this error compiling qmail-smtpd-auth that comes in /contrib of
Vpopmail, i`ve patched netqmail-1.05 with netqmail-maildirpatch++ and
qregex.
./compile qmail-smtpd.c
qmail-smtpd.c: In function `authenticate':
qmail
I have this error compiling qmail-smtpd-auth that comes in /contrib of
Vpopmail, i`ve patched netqmail-1.05 with netqmail-maildirpatch++ and
qregex.
./compile qmail-smtpd.c
qmail-smtpd.c: In function `authenticate':
qmail-smtpd.c:585: `AUTHSLEEP' undeclared (first use in this function)
qmail
I want to use xinet with qmail. Qmail had the stmpd
auth patch installed.
I need a config file for xinetd smtp service, using
stmpd and vchkpw.
Any people can send me a sample for the config file
?
Alex DM
Hi there,
Well i've tried to use vchkpw as the pw checking backend for
qmail-smtpd-auth. But at the moment it's not possible to gain access to
send mail trough the smtp server.
The server is invoked via tcpsever, and runs under the correct user:
/usr/local/bin/tcpserver -v -R -l mail.moritzi.ch
Hi Samuel,
On Tue, 18 Mar 2003 10:37:25 +0100 Samuel Hug [EMAIL PROTECTED] wrote:
http://qmail.org/top.html#checkpassword
Check out the hints by Mark Delany right at the top of the section.
I've tried this, works great! And also the logfile shows up with the
corresponding message:
Mar 18
Hi Peter,
The error message is quite clear, albeit I must confess: not it's
origin.
Are you, by any chance, running the qmail-smtpd process under control of
softlimit or do you have ulimits applied???
You're absolutely right, the softlimit is set to 2'000'000 membytes.
I've just adapted the
Hi there,
is there a simple way to induce my qmail-smtpd (patched with the
qmail-smtpd-auth patch from
http://members.elysium.pl/brush/qmail-smtpd-auth/) to use the vpopmail
mysql db as justice.
Best regards
Sam
Hi Sam,
is there a simple way to induce my qmail-smtpd (patched with the
qmail-smtpd-auth patch from
http://members.elysium.pl/brush/qmail-smtpd-auth/) to use the vpopmail
mysql db as justice.
You can use vchkpw as the password checking backend for
qmail-smtpd-auth, independent of wheter
Hi Jonas,
thanks for reply!
is there a simple way to induce my qmail-smtpd (patched with the
qmail-smtpd-auth patch from
http://members.elysium.pl/brush/qmail-smtpd-auth/) to use the vpopmail
mysql db as justice.
You can use vchkpw as the password checking backend for
qmail-smtpd-auth
Hi Sam,
Well i've tried to use vchkpw as the pw checking backend for
qmail-smtpd-auth. But at the moment it's not possible to gain access to
send mail trough the smtp server.
The server is invoked via tcpsever, and runs under the correct user:
/usr/local/bin/tcpserver -v -R -l
Hello.
I'm proud to announce a new version of qmail-smtpd-auth patch. We have
merged our effors with
Eric M. Johnston so now there is again only one qmail-smtpd-auth patch.
We have also set up a mailing list, which is available on
http://list.elysium.pl/mailman/listinfo/smtpauth .
Subscribe
ng to note is that
qmail-smtpd must run with permissions to see the /home/vpopmail file system
Hope this helps
Mark
-Original Message-
From: Alberto Rodrguez [mailto:[EMAIL PROTECTED]]
Sent: 24 January 2001 19:38
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: vpopmail and qmail-
Keep in mind that this will ONLY work if you don't use multiple uids/gids
for virtual domains. I keep all of mine under the vpopmail user, so it
works. If you use multiple uids/gids, then you can apply the patch, change
permissions on the directories and make it work that way.
afaik it will
on 1/25/01 4:50 AM, Krzysztof Dabrowski at [EMAIL PROTECTED] wrote:
Keep in mind that this will ONLY work if you don't use multiple uids/gids
for virtual domains. I keep all of mine under the vpopmail user, so it
works. If you use multiple uids/gids, then you can apply the patch, change
Im a bit confusing with faq:
http://members.elysium.pl/brush/qmail-smtpd-auth/faq.html#a2
There, you have some steps to install qmail-smtpd-auth with vpopmail. Below
I add steps...
is possible to use qmail-smtpd-auth wiht vpopmail ?
Answer.
(this answer is contributed by Christopher
/01 1:37 PM, Alberto Rodrguez at [EMAIL PROTECTED] wrote:
Im a bit confusing with faq:
http://members.elysium.pl/brush/qmail-smtpd-auth/faq.html#a2
There, you have some steps to install qmail-smtpd-auth with vpopmail. Below
I add steps...
is possible to use qmail-smtpd-auth wiht vpopmail
- Original Message -
From: "Alberto Rodrguez" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 17, 2001 9:39 PM
Subject: vpopmail and qmail-smtpd-auth
According qmail-smtpd-auths FAQ
"http://members.elysium.pl/brush/qmail-smtpd-auth/faq.html#a
Alberto Rodrguez wrote:
- Original Message -
From: "Alberto Rodrguez" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 17, 2001 9:39 PM
Subject: vpopmail and qmail-smtpd-auth
According qmail-smtpd-auths FAQ
"http://members.elysium.pl/brush/q
According qmail-smtpd-auths FAQ
"http://members.elysium.pl/brush/qmail-smtpd-auth/faq.html#a2" is possible
to use qmail-smtpd-auth with vpopmail. There, you have a patch
vpopmail.patch, and you must apply it to vpopmail source.
Well... The problem is that I get the patch and i
So..how about it Ken? Any ideas on this?
I've tested the qmail-smtpd-auth patch and it works great.
ken
Thanks :)
I'm the author of it ;) it works for me on our busy e-mail server at ISP
here in Poland so i think you can use it safely too.
And yes, it works with vpopmail.
Kris
So..how about it Ken? Any ideas on this?
I've tested the qmail-smtpd-auth patch and it works great.
ken
--
Linux Administrator Consultant
Russell "Elik" Rademacher
-Original Message-
From: Bjorn Nilsen [mailto:[EMAIL
on this?
--
Linux Administrator Consultant
Russell "Elik" Rademacher
-Original Message-
From: Bjorn Nilsen [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 10, 2001 9:57 PM
To: Vpopmail
Subject: qmail-smtpd-auth
I'm considering patching qmail with the qmail-smtpd-
Ken? Any ideas on this?
I've tested the qmail-smtpd-auth patch and it works great.
ken
--
Linux Administrator Consultant
Russell "Elik" Rademacher
-Original Message-
From: Bjorn Nilsen [mailto:[EMAIL PROTECTED]]
Sent: W
I'm considering patching qmail with the qmail-smtpd-auth patch. The reason
is that the roaming user pop before smtp function in vpopmail doesn't work
very well with my clients mail clients. In particular if Outlook has mail in
the Outbox it will always send that first no matter what. It does
Hello,
A new version of qmail-smtpd-auth patch has been released.
Changes:
- security fix - if your checkpassword crashed, attacker would get the relay
permission. Now it should work.
You can download it from the usual place:
http://members.elysium.pl/brush/qmail-smtpd-auth/
NOTICE
49 matches
Mail list logo