Re: tcpserver

Hi Change pop-3 to pop3 and it should work ok . also make sure pop3 is defined in /etc/services and it is not remmed .. reply if this work ..thanks > tcpserver 0 pop-3 qmail-popup /home/of/vpopmail/bin/vchkpw qmail-pop3d Maildir/ - Original Message - From: "Peter Palmreuther" <[EMAIL

Vpomail-4-10.32

I configured vpopmail as   ./configure \--enable-vpopuser=vpopmail \--enable-vpopgroup=vchkpw \--enable-qmaildir=/var/qmail \--enable-tcprules-prog=/usr/local/bin/tcprules \--enable-sqwebmail-pass=y \--enable-large-site=y \--enable-roaming-users=y \--enable-logging=y \--enable-valias=y \--e

Make errors

I configured vpopmail as   ./configure \--enable-vpopuser=vpopmail \--enable-vpopgroup=vchkpw \--enable-qmaildir=/var/qmail \--enable-tcprules-prog=/usr/local/bin/tcprules \--enable-sqwebmail-pass=y \--enable-large-site=y \--enable-roaming-users=y \--enable-logging=y \--enable-valias=y \--

RE: [vchkpw] -lz instalation error

Hi, You should install zlib and zlib-devel. -Original Message- From: Thiago Campos [mailto:[EMAIL PROTECTED]] Sent: Tuesday, August 27, 2002 9:42 AM To: [EMAIL PROTECTED] Subject: [vchkpw] -lz instalation error Hi, I'm getting the following error on my RH 7.3 This is my ./configure

[vchkpw] --enable-roaming-users=y

Hi, I have compiled vpopmail and all works properly except the relay part. I have checked de /var/qmail/supervise/qmail-smtpd/run file and there is the tcpserver -x /paht/tcp.smtp.cdb. I have been checking the FAQS and the mailing lists, but there is no information regarding my problem, since th

Re: [vchkpw] quota for per domains

Hi, Read in the documentation the configure options. mike. On Tuesday 21 January 2003 11:37, Dai Uehara wrote: > Hi All > > Is it possible to make quota for per domain? > I could'nt find in document. > > I use > vpopmail-5.3.12 > > OS > Turbolinux8 Server

[vchkpw] Message Wall

hi I wonder if anyone got Messagewall to work with a vpopmail setup .     Thankd BEGIN:VCARD VERSION:2.1 N:Tawafig;Mike FN:Mike Tawafig ORG:Hooper Holmes TITLE:Lan Admin ADR;WORK:;;;Basking Ridge;NJ;;USA LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Basking Ridge, NJ=0D=0AUSA EMAIL;PREF;INTERNET:[EMAIL

[vchkpw] message_wall Howto

hi Help needed regarding installing message wall with vpopmail and smtp-auth . Any help is appretiated .   thanks BEGIN:VCARD VERSION:2.1 N:Tawafig;Mike FN:Mike Tawafig ORG:Hooper Holmes TITLE:Lan Admin ADR;WORK:;;;Basking Ridge;NJ;;USA LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Basking Ridge, NJ=0D

[vchkpw] Hostname Problems

Hey, I just recently reinstalled qmail/vpopmail/courier-imap/courier-pop3d and for some reason on all the virtual domains when someone sends an email from outside the server to my server it appends the email addresses with zarx.net, which is the first domain on the server. Here is an example: Hi.

[vchkpw] qscanq with vpopmail setup

Hi anybody implemented qscanq with vpopmail . What are the group and user setup for the conf.* in qscanq .any help is appreciated . Thanks

Re: [vchkpw] qscanq with vpopmail setup

September 05, 2004 2:00 PM Subject: Re: [vchkpw] qscanq with vpopmail setup mike schrieb: Hi anybody implemented qscanq with vpopmail . What are the group and user setup for the conf.* in qscanq .any help is appreciated . Thanks Hi, Yes works fine here, the group and users are Gqscanq or so,

[vchkpw] chkuser patch causes problems with qmails sendmail binary

USER response is given after the RCPT TO causing pine to hang. That response shouldn't be in there. Any suggestions/hints as to how to stop this? Thanks, Mike Garrison

Re: [vchkpw] Using alternate sending IP on outbound mail

I ran into a similar problem a while ago. The easiest way with qmail is just to apply this patch and in control/outgoingip put the ip you want mail sent out on. http://www.qmail.org/outgoingip.patch :) -- Mike Garrison > I started writing an email to the list asking for help, and in

Re: [vchkpw] OT, but abuse related

Sent from the wrong address so it didnt make it to the list.. On Tue, 27 Sep 2005, Mike Garrison wrote: Hi Clayton, I can tell you what's going on. It's a fairly new exploit that spammers are starting to highly utilize. There are a few ways this occurs: 1) the form does not check

Re: [vchkpw] Abort_trap

I can tell you that there is a bug in the "latest" version of the autoresponder that causes this to happen with certain types of spam e-mails. I have a custom version that has some of it fixed, but occasionally it'll still happen. -- Mike Garrison >> On Aug 21, 2006, at 5:

Re: [vchkpw] vbulletin exploit toolbox....

You do realize that this has nothing ot do with vpopmail and is meant for the bulliten board software (http://www.vbulletin.com/) ... Mike Garrison > This message just rolled across the bugtraq mailing list... > > The message didn't indicate that the application owner had been >

Re: [vchkpw] OT - Preferred File Systems

ot have a good opinion of resierfs after real world experience with it. -- Mike Garrison !DSPAM:476c3934310541077512779!

Core Dumped by vdelivermail

Title: Core Dumped by vdelivermail Anyone has an idea on what would cause this kind of errors on my message log? Jul 18 08:18:30 net1 /kernel: pid 81486 (vdelivermail), uid 88: exited on signal 11 (core dumped) Thanks

PROCMAIL + QMAIL + VPOPMAIL

t for delivery. Can anyone tell me how to get it working and test it? Thanks in advance; -- Mike

MailDrop filter- PLEASE help

r two users who have requested it- any thoughts? -- Thanks in advance; -- Mike - 2001-07-24 11:25:11.921493500 info msg 262912: bytes 247 from <[EMAIL PROTECTED]>qp 12707 uid 0 2001-07-24 11:25:12.172821500 delivery 7734: deferral: /usr/bin/maildrop:_Unable_to_open_mailbox./ 2001-07-

Re: domain.com and .net and symbol link

./vaddaliasdomain dom.net dom.com now create everything in .com and any mail going to .net will appear as if it was sent to .com problem solved -- Mike - Original Message - From: "alexus" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 24

Re: Closing an account when a customer hasn't paid?

ld not allow anything to happen for the domain... this of course requires a code hack Cheers- Hopefully good temporary solutions -- Mike - Original Message - From: "Jesper Hess Nielsen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 23, 2001 3:5

MailDrop + VPopMail

in various forms] within the filter, to toying with various settings. There has to be some sort of way to get this working properly. Anyone have any pointers? -- Mike

maildrop + vpopmail [unable to open mailbox]

disturbing- i got an unable to chdir to maildir at one point, but that was failing must worse. -- Mike [EMAIL PROTECTED]

FOLLOWED: maildrop + vpopmail [unable to open mailbox]

Problem fixed and on a global basis. Using a few variables, I got one script working for all vpopmail domains. maildrop now delivers properly to my vpopmail domains and users. Thanks so much guys! -- Mike

Solaris 8

checking whether gcc accepts -g... yes checking for ranlib... ranlib checking for POSIXized ISC... no checking how to run the C preprocessor... gcc -E checking for AIX... no ./configure: /usr/xpgr4/id: not found ./configure: test: argument expected bash-2.03# Thanks Mike

RE: Solaris 8

I did that and it still gave me the same error? Mike -Original Message- From: Apis Hytt [mailto:[EMAIL PROTECTED]] Sent: Friday, September 07, 2001 5:03 PM To: Mike Jimenez Cc: vchkpw Subject: Re: Solaris 8 On Fri, 7 Sep 2001, Mike Jimenez wrote: > When I try to compile w

Re: vpomail 4.9.10 takes 100% CPU

buggy crypt libraries. What distro/OS -- Mike - Original Message - From: "alexus" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, September 21, 2001 2:51 AM Subject: vpomail 4.9.10 takes 100% CPU > i have qmail that was workin' fine 'til

Re: vpopmail5 w/ mysql

vi vmysql.h >> change hostname, password and username to connect to the MySQL server -- Mike - Original Message - From: "alexus" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, September 21, 2001 12:09 AM Subject: vpopmail5 w/ mysql > hello

Re: pop3 session would freeze

If that shows some really large number (bytes) besides message 14, you'll know why. -- Mike PS: And stop using Microsoft products X-Mailer: Microsoft Outlook Express 5.00.2919.6700 *smirk* - Original Message - From: "Ken Jones" <[EMAIL PROTECTED]> To: "Ufuk M. F

Re: traffic accounting

n.com' and then add all the nuimbers. -- Mike - Original Message - From: "Justin Heesemann" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, October 21, 2001 7:20 AM Subject: Re: traffic accounting > > a question for all of you running vpopmail in

Please Help

.cdb -c "$MAXSMTPD" \ -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp /var/qmail/bin/qmail-smtpd 2>&1 /var/qmail/supervise/qmail-pop3d/run #!/bin/sh exec /usr/local/bin/softlimit -m 200 \ /usr/local/bin/tcpserver -v -R -H -l 0 0 110 /var/qmail/bin/qmail-popup \ rocky.vpi.net /home/vpopmail/bin/vchkpw /var/qmail/bin/qmail-pop3d Maildir 2>&1 Can someone please help me out I cant figure out what is going on Mike Jimenez

Please Help

Okay but /home/vpopmail/etc/tcp.smtp.cdb does not exist? Also I don't think the multiple smtp process are normal. When I kill one I will get sometimes 3 more back? Im confused. Mike -Original Message- From: Bruno Dalapicola Bergamaschi de Souza [mailto:[EMAIL PROTECTED]] Sent: F

Please Help

Correct when I kill it it still comes back and when I restart it will add another one. Also /home/vpopmail/etc/tcp.smtp.cdb does not exist but this does /etc/tcp.smtp.cdb And its owned by vpopmail Thanks Mike -Original Message- From: Bill Shupp [mailto:[EMAIL PROTECTED]] Sent: Friday

Upgrade VPOPMAIL 4.9.10 --> 5.0 && CDBvsMySQL

as getting too slow and failing on some requests. I believe I have enough power now as I have severely reduced the load on the server. Is it worthwhile for me to switch back? When is the threshold in which CDB starts loosing out to MySQL. Thanks for help with either of these. -- Mike

Q-Mail Log

log only certail domains- OR is there anything that will log to maybe 'log'@each domain which it is associated with or something along those lines? Thanks! -- Mike

A few VPOPMAIL 5.0 Questions

ure builds, but at the same time, I wouldn't want to disrupt current operations. Has anyone had success with migrating this without opening learn-passwords up to everyone? Finally, is there actually a disadvantage to using --enable-file-locking=y --enable-file-sync=y ? Thanks guys! -- Mike

Re: A few VPOPMAIL 5.0 Questions

ck with my encrypted passwords until I go back to MySQL- though I don't see the benefit anymore. Thanks so much! -- Mike - Original Message - From: "Bill Shupp" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 30, 2001 12:55 PM Subject: Re: A fe

Re: A few VPOPMAIL 5.0 Questions

encrypted* password. The > clear field is just for reference, and gets updates only when the > password is changed, regardless of method. Hrm- Makes sense. So I think I will add it. I believe I will need to add a : to the end of each line in each cdb source right? -- Mike

Re: AW: Big Vpopmail 5.0 upgrade problem

ually going at using it. Lemme know. -- Mike - Original Message - From: "Ken Jones" <[EMAIL PROTECTED]> To: "Andreas Müller" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Tuesday, November 27, 2001 4:45 PM Subject: Re: AW: Big Vpopmail 5.0 upgrad

VPOPMAIL 5.0 PATCH: Clear text passwords in upgrade

l mess it up if --enable-learn-passwords. As well, if you don't have clear-passwords enabled, then adding the extra field with the shell script may hinder authentication. - No warranties, etc. etc. etc. Works-For-Me-Ware - Maybe this should be a temporary option for vpopmail itself?

VPOPMAIL + APOP

Anyone know how to get APOP working with VPOPMAIL-5.0. I had it working with 4.9.10, but then when I upgraded it disappeared and now no-longer works. As well, I tried added APOP 1 to the config.h but that didn't help- any ideas or patches? -- Mike

Re: VPOPMAIL + APOP

Hrm- Maybe that should be documented somewhere. Seems like a pretty useful feature to just get rid of. There is still APOP switches on all the tools as well and an APOP field. Hrm... -- Mike - Original Message - From: "Tren Blackburn" <[EMAIL PROTECTED]> To: <[EMA

Re: password(); vpopmail mysql php??

of it. This is your SALT. then run crypt() with the entered password and the salt you pulled off of the encrypted password. If they match, you're user is good. If they don't, password fail. MySQL has it's own password() scheme. Also, shouldn't you have a domain in that query

Re: VPOPMAIL + APOP

Great! Any expected release date for 5.1? You think it will support CRAM-MD5 as well (there are two standard forms of APOP)- Makes no diff if it only does one though. Just would love something back. -- Mike - Original Message - From: "Ryan Duda" <[EMAIL PROTECTE

VPOPMAIL 5 and QUOTAs

port to be enabled on a per-domain and per user@domain basis only when set manually by vmoduser or while creating the domain? -- Mike

Exchange + QMAIL (forwarding)

are a whole bunch of questions] Thanks guys; PS: I know this isn't the best place for this question, but I figured someone may have experience in these areas. -- Mike

Re: Exchange + QMAIL (forwarding)

I have added the line: domain.com:[123.456.789.123] to my smtproutes file. Not sure if I have to do the brackets, but it said so somewhere. I am questioning whether I need to add this to 'rcpthosts' as well... Not sure of that one. -- Mike - Original Message ----- From: &q

RE: [vchkpw] Off the Topic sqwebmail install problems on Solaris 8

Chris, I looked through the Makefile for Sqwebmail and could not find anything with  " –L” options? Thanks   Mike Jimenez   -Original Message- From: chris [mailto:[EMAIL PROTECTED]] Sent: Sunday, August 25, 2002 12:35 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Su

[vchkpw] Had SMTP auth working...

l supports "pop-before-smtp" and "roaming users" rather than remote SMTP auth... am I just not using this service properly? Thanx in advance! Regards, Mike D.

[vchkpw] Trying to get vchkpw to work in any configuration

he mysql stuff. I am running redhat 7.3. Anyone have any ideas???   Thanks,   Mike      ./configure --enable-mysql=y --enable-valias=y --enable-auth-logging=y --enable-passwd=n --enable-logging=p --enable-defaultquota=1000S --enable-many-domains=n --enable-valias=y --enable-mysql-lo

Re: [vchkpw] NFS shared

cdb also needs to be > shared. Any others files? Be careful sharing tcp.smtp.cdb - lots of logins and updating that file will cause you some hell :) -- Mike Horwath IRC: Drechsau [EMAIL PROTECTED] Home: 763-540-6815 1901 Sumter Ave N, Golden Valley, MN 55427 Opinions stated

Re: [vchkpw] SpamAssassin/vmodinfo changes

I have also done a similar thing. I am now working on modifying vpopmail/qmailadmin to put this information in individual users .qmail files. This is because my domain method fell apart when email was addressed to an alias, or caught by a domain catchall address. With individual .qmail files, the -

[vchkpw] Qmailadmin 1.0.21 & antispam

and there is therefore no filtering. Does anyone have any ideas how I can alter vpopmail to deliver to the user's directory? Thanks, Mike

Re: [vchkpw] Qmailadmin 1.0.21 & antispam

OK I've answered my own question. Just set the catchall to 'remote' with the local address. Job done. On Mon, 2003-06-09 at 12:54, Mike Fabricius wrote: > Hi everyone, > > I've installed the new qmailadmin and I'm using it with a .qmail file >

[vchkpw] VPOPMAIL 5.3 release

Hi Folks, So I've been watching this list for some time as well as the development page, just itching to try out some of the new features available and reworking of many things. I am building another few racks of servers for use in production, and am seeing the vpopmail 5.3 is still in develop

[vchkpw] vpopmail -d 'user directories'

em whereever I want- without the prefixes? I'm using latest development 5.3.20 Thanks in advance, -Mike _ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail

Re: [vchkpw] vpopmail -d 'user directories'

lah/mail but > that creates a > directory /home/blah/domains/domain-name.com with postmaster in > this folder. > How can I get it to not require this structure, but rather > just add them > whereever I want- without the prefixes? I'm using latest > development 5.3.20 >

virtual domain headers

Hi All, Whenever I send mail from a virtual domain, it contains my machine hostname in the From: field. How do I get it to use my virtual domain name instead? TIA, Mike M

Statistic Info

Does anyone know if its possible to print statistics easily? Either via a C program or via perl. Basically I want to be able to pull up "you have X pop accounts" on a central page -- Mike _ Get

Re: Statistic Info

rwards, autoresponders, etc) do not seem to be placed within the sql database. I figured there might be some sort of API call that I could write up in C and link the vpopmail library to. How does qmailadmin do it? Just via counting? -- Mike >From: Frans Haarman <[EMAIL PROTECTED]>

Re: Statistic Info

tions I need from qmailadmin and implement it into a C program linked with libvpopmail (I'd assume it'll be required) - prolly need to be SUID vpopmail but with some error checking on accepting the one input, I don't see it being too much of a problem. -- Mike ___

Re: could not change to directory error

have the same problem... no idea why its going on- been trying to track it down myself with no luck. Any inter7 people wanna shed some light? -- Mike >From: "Hubbard, David" <[EMAIL PROTECTED]> >To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> >

Re: Is anyone using PHP?

on (cgi-php for vpopmail) when you can just go with the C tools and use passthru and exec to call your tools. What we ultimately ended up doing is converting our PHP code to C code and link it with the lib. SUID/GUID it (and make sure its safe code) and then use exec() to run it. --= Mike >From

RE: could not change to directory error

The problem is consistent on this end. it occurs _only_ on login to qmailadmin, and everything works just fine- its just annoying to have those messages in the log. -- Mike >From: "Hubbard, David" <[EMAIL PROTECTED]> >To: 'Mike Miller' <[EMAIL PROTECTED]&

Re: vpopmal + php

Use the CGI version- I posted something to the qmailadmin mailling list as I have done similar activities. -- Mike >From: "Sean P. Scanlon" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Subject: vpopmal + php >Date: Sat, 27 Jan 2001 14:54:19 -0500 >

Re: security bug in vpopmail

(vpopmail) open to the public, thats your issue. VPOPMAIL by default secured my directory tree just fine, and i did even more for the directory under it. You may want to check out if your chanign the directory permissions ont he homedir -- Mike >From: "Alex W" <[EMAIL PROTECTE

Failed passwd attempt

dress.. vanislenet.net is main server id and I have about 20 virts on it.. No other email errors are occuring on other domains... The passwords are correct and the ip is my cable ip... Hope I can get some guidance, Thanks in advance Mike _ Mike Perks VanIsleNet Web Hosting

MySQL -vs- CDB [Conversion]

is there a conversion utility that will convert from MySQL (small tables) to CDB? Any recommendations on if I should do this? Please advise... anyone with experience in this area? Cheers; -- Mike

Re: MySQL -vs- CDB [Conversion]

currently running the MySQL module, and I want to move to CDB to speed it up. Also it would avoid the waiting for connections. Sounds like a good plan to me- is the upgrade easy? Just run vconvert and recompile vpopmail? (then qmailadmin/sqwebmail) -- Mike - Original Message - From: "

VIPMap

/man_html or doc/doc_html, so I find it odd. Currently, -p shows nothing. Does it by default use DNS? Does it use DNS as a last resort but this is faster? It's not mentioned, so I'm worried to try it Thanks in advance; -- Mike

CDB Files?

postmaster::1:0:Postmaster:/home/vpopmail/domains/domain.com/postmaster:NOQUOT A I just ran ./vconvert and got lots of vpasswd files like this. Is this was a CDB file looks like? I thought they were compiled? -- Mike

Open-SMTP

the entry, as I have now. Thanks in advance; -- Mike

SQWebMail Designs

Hi All; Been using SQWEBMAIL for ages, and have always loved it. I've always thought the Interface needs to be a bit more streamlined. Are there design templates (i've seen language templates) which will give me neat designs for my SQWEBMAIL installation? Cheers; -- Mike

[vchkpw] Permission $vpopmail/lib directory

[vpopmail - 5.3.20] So I installed vpopmail and now I'm compiling courier-IMAP as a non-root user (like a good boy). Problem is, /var/vpopmail/lib and the libvpopmail.a library are chmodded 700 without permissions besides root. Maybe this should be 755 or 750 by default to allow such prob

Re: [vchkpw] Permission $vpopmail/lib directory

I'd agree now that I remember ( as I think I partook in that discussion a few years ago, but forgot about it ). Agreed to leaving it 700 so that you need to be specifically aware if you change it. Thanks folks. -M _ Protect your P

[vchkpw] Using custom domain directories

ontrol/users, however I'd of course like to avoid that and have this done right. otherwise, maybe we need a documentation update to properly describe how this works. Personally, I'd like to see the option to just use the directory I specify rather than creating a dir

Re: [vchkpw] Using custom domain directories

not the directory used to _store domains_, but rather, to store _this_ domain. -M From: "Mike Miller" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: [vchkpw] Using custom domain directories Date: Fri, 11 Jul 2003 22:12:33 + I made a posting a few weeks about this and didn

[vchkpw] PATCH: alllow content directory to be specified adding a new domain

PATCH: alllow content directory to be specified adding a new domain -- Attached is a diff against 5.3.21 which adds the ability to utilize any directory as the content directory, rather than simply as the domains directory. We use this for a hosting provider who wants to

[vchkpw] PATCH: Define custom Domain Directory

have to do to get this into the distribution for all to appreciate :) As opposed to having custom direcories to store domains in, this patch allows a user to simply store a domain anywhere- in a pre-existing directory for mail. Cheers; -- Mike [note: Michael Rogers is not my real name

Re: [vchkpw] vpopmail virus scanning - but per domain

RAV Antivirus does it as well. Again- commercial software. They also have one of the best pieces of virus software around (Microsoft just bought most of the company- probably to try and put it into future windows versions). www.ravantivirus.com I think. They have RAV for qmail. Most package

[vchkpw] SMTP-Auth bug in passwords?

Vy 235 ok, go ahead (#2.0.0) I'm not sure if this is in vchkpw or in the patch to qmail-smtpd, however I'm looking for anyone's experience or maybe even to identify a bug. Thanks in advance, -Mike _ Add photos to your

Re: [vchkpw] SMTP-Auth bug in passwords?

Nope. Not using MD5 passwords. 5.3.20 at present. -M From: Tom Collins <[EMAIL PROTECTED]> To: vpopmail list <[EMAIL PROTECTED]> Subject: Re: [vchkpw] SMTP-Auth bug in passwords? Date: Tue, 9 Sep 2003 21:24:31 -0700 On Tuesday, September 9, 2003, at 08:40 PM, Mike Miller wrote:

Re: [vchkpw] SMTP-Auth bug in passwords?

It is my understanding that this is not using CRAM-MD5 but PLAIN login, so those methods aren't affected. I used the http://members.elysium.pl/brush/qmail-smtpd-auth/ patch and haven't had difficulty using it from within netscape or other clients. I will be investigating further. As far as I

Re: [vchkpw] SMTP-Auth bug in passwords?

It's JUST login/plain and not CRAM-MD5. As proof, I used a test client script: # Simple SMTP client with STARTTLS and AUTH support. # Michal Ludvig <[EMAIL PROTECTED]>, 2003 # See http://www.logix.cz/~mic/devel/smtp for details. # ./smtp-client.pl --host= --hello-host=breaded --disable-starttls

Re: [vchkpw] Re: SMTP-Auth bug in passwords?

To: [EMAIL PROTECTED] CC: [EMAIL PROTECTED] Subject: [vchkpw] Re: SMTP-Auth bug in passwords? Date: Wed, 10 Sep 2003 13:30:27 GMT Mike Miller writes: > Nope. Not using MD5 passwords. That would explain it then. As Tom said, DES-style crypt ignores everything after the first eight characters of t

Re: [vchkpw] Re: SMTP-Auth bug in passwords?

hkpw] Re: SMTP-Auth bug in passwords? Date: Wed, 10 Sep 2003 13:30:27 GMT Mike Miller writes: > Nope. Not using MD5 passwords. That would explain it then. As Tom said, DES-style crypt ignores everything after the first eight characters of the password. MD5-style crypt has a higher limit,

Re: [vchkpw] Re: SMTP-Auth bug in passwords?

[vchkpw] Re: SMTP-Auth bug in passwords? Date: Wed, 10 Sep 2003 13:44:03 GMT Mike Miller writes: > Okay, but should it be _allowing_ this as a password or don't you think > that it should reject it? I think that it is behaving at it is documented to behave and that your expectations are

[vchkpw] UPGRADE to MD5 encryption

to use both at the same time. Thoughts? -Mike _ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail

[vchkpw] Vpopmail question

If i were to install qmail and vpopmail on a second server and then just copy the entire /home/vpopmail folder to the other machine, would all the email  and mailboxes be tranferred to the new machine?   thanks   -Mike

[vchkpw] Delete Mail-- Serious Issue!

the queue again and again it creates clogs. Thanks in advance, -Mike _ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/photos&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage

[vchkpw] Re: [qmailadmin] Delete Mail-- Serious Issue!

However, /bin/sh exists. [EMAIL PROTECTED] /]# su vpopmail [EMAIL PROTECTED] /]$ w [EMAIL PROTECTED] /]$ /bin/sh [EMAIL PROTECTED] /]$ exit [EMAIL PROTECTED] /]$ exit seems to work if you ask me. As well, another oddity. This is all just on the one delete and didn't do it before I added it. S

Re: [vchkpw] Re: [qmailadmin] Delete Mail-- Serious Issue!

> However, /bin/sh exists. > [EMAIL PROTECTED] /]# su vpopmail > [EMAIL PROTECTED] /]$ w > > [EMAIL PROTECTED] /]$ /bin/sh > [EMAIL PROTECTED] /]$ exit > [EMAIL PROTECTED] /]$ exit > > seems to work if you ask me. It is your lack of talent to install it, in my system vpopmail is account with

Re: [vchkpw] Delete Mail-- Serious Issue!

Perfect. A life saver :) Thank you Tom. -M From: Tom Collins <[EMAIL PROTECTED]> To: [EMAIL PROTECTED], vpopmail list <[EMAIL PROTECTED]> Subject: Re: [vchkpw] Delete Mail-- Serious Issue! Date: Wed, 12 Nov 2003 18:06:52 +1100 On Tuesday, November 11, 2003, at 10:22 AM, Mike Mill

Re: [vchkpw] SATA NAS for vpop cluster

cheaper than NetApp? http://www.winsys.com/products/flata.php Then use your favorite of UNIX systems (FreeBSD preferred by me) to be your NFS server OS of choice. Simple. Mostly cheap. Tell them I sent you. -- Mike Horwath, reachable via [EMAIL PROTECTED]

[vchkpw] Vchkpw authorization problem

webmail-3.5.0.20030301 - ucspi-tcp-0.88 - vpopmail-5.2.1 Any help is greatly appreciated! ... Mike Dunlop Webmaster - AWN, Inc. [ e ] [EMAIL PROTECTED] [ p ] 323.606.4237 AWN.com | VFXWorld.com | AIDB.com

Re: [vchkpw] Vchkpw authorization problem

it +OK == ... Mike Dunlop Webmaster - AWN, Inc. [ e ] [EMAIL PROTECTED] [ p ] 323.606.4237 AWN.com | VFXWorld.com | AIDB.com On Nov 9, 2004, at 2:55 PM, Mike Dunlop wrote: Used the qinstall package to install qmail/vpopmail and it appears things are working. Upon trying to

[vchkpw] vpopmail + ldap

AD)! If I'm barking up a dead tree, I would love to know that, too. Thanks in advance, Mike

Re: [vchkpw] vpopmail + ldap

On Fri, March 18, 2005 9:15 am, Tom Collins said: > On Mar 18, 2005, at 7:06 AM, Mike Husmann wrote: >> The catch: My user database is in Active Directory, and I can't talk >> management out of letting it go yet. > > There's an Active Directory authentication

[vchkpw] authdaemond authvchkpw segfault/core on AMD64

After battling with this for more than a week -- I've now well surpassed my knowledgebase, and am seeking assistance with this issue. I'll briefly summarize my current situation, and then go into detail about how I got here for reference and the search engines. I'm able to execute the comman

  1   2   >