Hello
I having a problem trying to even boot Solaris 10 with Vmware Server 1.9
The VMware won't even open it, the one on the blade gives me memeory dump
errors. I can not load failsafe
I can load into command, and even If I try to boot off CD I get the same
error.
Any Ideas
I have Vmware Server
> Hello
>
> I having a problem trying to even boot Solaris 10 with Vmware Server 1.9
>
> The VMware won't even open it, the one on the blade gives me memeory dump
> errors. I can not load failsafe
> I can load into command, and even If I try to boot off CD I get the same
> error.
>
> Any Ideas
>
>
Hello
I having a problem trying to even boot Solaris 10 with Vmware Server 1.9
The VMware won't even open it, the one on the blade gives me memeory dump
errors. I can not load failsafe
I can load into command, and even If I try to boot off CD I get the same
error.
Any Ideas
I have Vmware Server
Hello,
Just wanted to know with the VCL system, how are you getting Windows XP 64
bit to work correctly.
When I load up bridged network drivers I get Intel 1000 Drivers installed
because those are the 64 Bit Drivers.
The VMX file says it's Windows XP 64 Bit
When I go to load up my images they will
Hello
Anyone have a fix on why IP printing with Windows 7 RDP is not working
correctly.
Is there a way to have the IP printer drives that are installed on a Windows
7 machines that are connecting to a XP Vmware Image will be able to pull the
drivers and be able to use IP printing with RDP?
The l
Hello,
We have our CentOS 5.4 Linux Image. It works just fine when we load it in
the VCL system We are able to log in and use the image, in our current
vmware guest accounts.
The problem we are having with our system is that when another image like a
Windows Based images tries to reload over the c
Hello,
I wanted to know how everyone else is connecting to there local Linux or
Solaris Labs with VCL?
We have a few labs that here on campus that are running Linux and Solaris.
We have students here who connect to these labs via remote. We want to move
these computers to a rack and only allow use
Hello,
I am getting an error one one of my new Images that was built in Vmware
Server.
I had to built it in Vmware Server due to it's Size.
19.1 GB
The Software is Adobe Creative Suite 4 Web Premium, It's Windows XP SP3
Firewall is off
SingleCore Image, i have built my other 30 that work the sam
Hello All,
I'm having an issue with my Centos 5.5. I have built it just as
instructed in the boot camp.
I'm having an issue with the Image Creation. I can load up the image
and use it just fine. I'm having a problem creating an image off of
it.
I did turn of sysprep when I was asked, but anyways
evious name= $oldname");
> }
> }
>
>
> Since the original name is something like vmwareCentos5.582-v0-s001.vmdk
>
> $oldname never gets set.
>
> But it looks like it did copy the vm
Hello
Sorry I should of waited
Both of them create now. :)
Thanks for the fix
-Alex
On Fri, Jul 9, 2010 at 12:44 PM, Alexander Patterson
wrote:
> Hello
>
> The files were copied and the image is there but it shows up as a
> deleted image in my image repository.
>
> I can se
Hello,
I'm getting this error with my Office 2010 Image that was working
before and now it's failing at resources ready.
Anyways here is the error log.
e operation completed successfully The following command was not
found: advfirewall firewall delete rule name=all dir=in protocol=TCP
localport
Windows 5.x, netsh.exe will return
> "The following command was not found: ...".
>
> Check if your image has the correct OSid value in the VCL database
> (image.OSid). This points to the OS table, which points to the module
> table:
> image.OSid --> OS.id
>
Hello,
Been having an issue with our system. We just added a few new blades
and had our network team move over files to clone our blades so they
work correct.
I can't create images anymore. Normal operation works, but I can't
update or create images currently.
Here is the error code I am getting
e.pm:DESTROY(935)|$ENV{dbh}:
database disconnect successful
2010-09-08 13:06:01|16896|10092:9828|new|State.pm:DESTROY(949)|VCL::new
process 16896 exiting
2010-09-08 13:06:01|4994|vcld:REAPER(744)|VCL process exited for
reservation 9828
On Wed, Sep 8, 2010 at 8:55 AM, Alexander Patterson
wrote
You could try to
> download and install the VMware vSphere Perl SDK on a host having this
> problem. I know vmkfstools gets installed when I install the SDK on a
> VMware Server 2.0 host. If this doesn't work you could try updating the
> host to reinstall the files with the host updat
runs into this issue, this is the solution
Thanks
-Alex
On Wed, Sep 8, 2010 at 8:55 AM, Alexander Patterson <
alexander.patter...@csueastbay.edu> wrote:
> Hello,
>
> Been having an issue with our system. We just added a few new blades
> and had our network team move over files t
+ 1 from Me. I would love to use 2.2 with vmware server 2.0 and Windows 7
support! I look forward to using esxi over gsx as well.
That's a persona option, no idea if my company will want to go in the same
direction.
-Alex
On Fri, Sep 17, 2010 at 2:06 PM, Josh Thompson wrote:
> -BEGIN PGP SI
I may have spoken to soon about the base images. I was able to update the
this image yesterday and it took the changes, but when I try to reload the
image back up to create new images. I can't even get it to load.
2010-09-17 10:29:59|31791|12038:11774|new|vmware.pm:load(672)|grep:
/install/vmware
+ 1
On Wed, Sep 22, 2010 at 3:47 PM, Josh Thompson wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> I'm starting a different thread to vote again based on RC2 to make it
> easier
> to tally votes.
>
> This is basically the same email as before except with RC1 changed to RC2.
> There w
Hello,
This is an ongoing question about how the VCL scripts clean up the vmware
tmp directory.
I have a few questions about the process and what gets cleaned.
What files are deleted in the vmware tmp, when the vcl runs its cleanup
scripts. Are there any directory or files that are safe to manua
8,7 16106127361880509 /vmware-tmp/vmware-root/mm0
(deleted)
-bash: syntax error near unexpected token `('
On Thu, Oct 21, 2010 at 10:46 AM, Aaron Peeler wrote:
> Alex,
>
> What files are you seeing in vmware-tmp?
>
> either by using ls -l or lsof |grep vmware-tmp
>
&g
I think this is a great idea and would be a welcome change to VCL. I'm sure
we would use this for professors who want to manage their own groups and not
have full privileges.
-Alex
+1
On Thu, Nov 4, 2010 at 5:35 AM, Waldron, Michael H
wrote:
> Josh,
>
> I like your idea. It's always good to be
Hi Aaron -
We made the changes you suggested
to /var/www/html/apache-VCL-2.1-incubating/managementnode/lib/VCL/
reserved.pm . The reservations are still timing out after 15 minutes.
The changes were applied as seen below. But it didn't change the time from
15 minutes to 20 minutes like we wanted
se changes on our 2.1 sandbox image and got the 20 minute
> timeout.
>
> Also just to make sure, you wanted 20min for the user to hit the 'connect'
> button and 20 min for the user to actually connect right?
>
> Aaron
>
>
> On 11/19/10 6:47 PM, Alexander Patt
nge the value
> of $connect_timeout_limit in /usr/local/vcl/lib/VCL/inuse.pm from 15 to
> 20
> as well.
>
> On Mon, Nov 29, 2010 at 2:54 PM, Aaron Peeler
> wrote:
>
> > Hi Alex,
> >
> > The attached image doesn't give me any info other than the image has
&g
Hello,
I have made both changes and restarted vcld
Here is a log of one of the VM's that are stilling timing out after 15
minutes.
|21690|29445:29181|new| VCL Admin,
|21690|29445:29181|new| The resources for your VCL request have been
successfully reserved.
|21690|29445:29181|new| Reservation In
I would like to test this as well, can you email me access at
alexander.patter...@csueastbay.edu
Thank you
-Alex
On Tue, Dec 7, 2010 at 1:11 PM, Aaron Peeler wrote:
> Hi Mike,
>
> We've done it several times and it's gone smoothly.
>
> We have a 2.1 sandbox image in our production infrastructure
+ 1 Stability in VCL releases sounds like a good thing
-Alex
On Thu, Jan 20, 2011 at 11:37 AM, Aaron Peeler wrote:
> +1 for a 2.2.1 release
> Aaron
>
> On 1/18/11 12:38 PM, Andy Kurth wrote:
>>
>> I'd like to propose cutting an interim VCL 2.2.1 release within the next
>> month. There have been
Hello,
I'm having an issue with one of my VM's it fails from time to time
with different images. I'm not sure whats going on.
Any insight would be helpfull.
Thank you
-Alex
Here is the log
2011-02-01 16:28:04|6620|36146:35882|reload|vmware.pm:load(883)|vmguest-65
ROUND 1 checks loop 64 of 40
Hello,
I'm having an issue with a new build Image
Here is the error Log
State Est/Act
TimeTotal
Time
confirming image exists(22) 0:04/0:14 0:14
starting load process(40) 0:06/0:02 0:16
creating configuration file(28) 0:02/5:32 5:48
starting virtual machine(48)
Hello Aaron Peeler,
I think this is a great idea, I have had this happen to me before and
It's no fun. I would also love to see a easy way to extend the time
frame that you can create images for. Currently it is set to 8 hours.
If there was a menu options with a time frame drop down, or even an
ed
Hello,
I'm having a few issues with a new install of VCL 2.2
I am using Red Hat Enterprise Linux Server release 5.6 (Tikanga)
yum install httpd mod_ssl php-gd php-mcrypt php-mysql php-xml
php-xmlrpc php-ldap
-yum php-mcrypt ins't working or being found in 5.6 in Red Hat, so I
have to set it up
Hello,
I have a few errors with the install
VM host password is not configured in the database for the VM profile
API object could not be created:
VCL::Module::Provisioning::VMware::vSphere_SDK, no eval error
(Is there any documentation on the correct command to run or make it
run as eval?)
|23
Hello Fento,
Have you add the information about your Managment Node and Web Page
URL to your secrets.php file.
Also Did you setup the Mysql?
yum install mysql -y
yum install mysql-server -y
/sbin/chkconfig --level 345 mysqld on
/sbin/service mysqld start
Enter into mysql
mysql
Create a databa
011-03-01 14:46:33|24259|52:44|new|VIM_SSH.pm:_run_vim_cmd(193)|vim-cmd
call count: 12 (vmsvc/getallvms)
2011-03-01 14:46:33|24259|52:44|new|VIM_SSH.pm:_run_vim_cmd(208)|executed
command on VM host vclesxi01: vim-cmd vmsvc/getallvms
2011-03-01 14:46:33|24259|52:44|new|VIM_SSH.pm:_run_vim_cmd(193)|v
+ 1 I love bug fixes :)
On Fri, Mar 18, 2011 at 1:30 PM, Josh Thompson wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> In mid January, the community decided to go ahead with a release of 2.2.1 to
> get a lot of bug fixes out. We've finally gotten to the point of doing the
> release.
Hello VCL Dev,
I had a question about how other institutes are running ESXI 4.1
hypervisior and DHCP with VCL.
I wanted to know if anyone could share with me the way they configured
the network setting to work with the VM's and get a IP address from
using a DHCP server.
Could someone post how yo
Hello,
I'm having an issue with VCL 2.2.1 I have my old images and If I try
to create or update them I run into this error
error occurred setting root as the owner of /home/root, error output:
`/home/root/.ssh': Permission denied
chown -R root /home/root/.ssh has been set
I have my root dir as
Hello Josh,
After we upgrade to VCL 2.2 we are having issues with Shibboleth Issue
with Identity Management, we are unable to import classes from
peoplesoft for students. Our classes are starting next week. I wanted
to know if you had any time to help? Could we setup up a short call?
Please let m
1 most of the information that is lost isn't important and when they
need to make another block they can redo it. We don't do as many
blocks are you do, but 1 would be ideal.
On Wed, Oct 26, 2011 at 12:58 PM, Josh Thompson wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> I just discov
Hello,
I'm having an issue with one of my images
See Log here
http://pastebin.com/LT5wdBQr
This image was working fine before nothing was changed. I tried to do
both a image roll back and update the image and each time this image
loads I keep getting the same error.
I see the image on my ESXI
We have the same issue here with the GIS software. It's due to RDP has to
refresh the whole screen shot. The GIS software works much better with like
a Cirtix or VMware VDI that doesVmware PCoip that only needs to fresh the
parts thats being used.
RDP does has it's down faults.
-Alex
On Mon, Apr
Hello,
ESXI 5 is limit by licenses with the amount of ram you can run on each machine.
The 8 GB vRAM limit is for the upcoming 5.0 free Hypervisor, the 4.x
version had no such memory limits.
VM makes you pay now if you want to use X amount of ram per host with
the upcoming version.
Making 4.1 I F
ease
> notify the sender and delete this e-mail from your system.
>
>
> -Original Message-
> From: Alexander Patterson [mailto:alexander.patter...@csueastbay.edu]
> Sent: Thursday, May 24, 2012 5:17 PM
> To: vcl-dev@incubator.apache.org
> Cc: vcl-u...@incubat
+1
Alex CSUEB
On Wed, May 30, 2012 at 9:58 AM, Waldron, Michael H
wrote:
> +1
>
>
> Mike Waldron
> Systems Specialist
> ITS Research Computing
> University of North Carolina at Chapel Hill
> CB #3420, ITS Manning, Rm 2509
> 919-962-9778
>
> From: Josh Thom
+ 1 Alex CSUEB
On Fri, Jun 15, 2012 at 1:27 PM, Josh Thompson wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> FYI
>
> - -- Forwarded Message --
>
> Subject: Re: [VOTE][RESULT] graduation of VCL as a TLP
> Date: Friday, June 15, 2012, 4:26:09 PM
> From: Josh Thompson
47 matches
Mail list logo