Keeps us fresh
Rene
On 02/21/2016 03:43 AM, Allan Fish wrote:
> Rick,
> My tying job was yesterday. It was the first day of a three day fly fishing
> expo at state fairgrounds. I was tying at our club's table (Indianaplis
> Flycasters). After 7+ hours of tying and talking, I could barely talk
Rick,
My tying job was yesterday. It was the first day of a three day fly fishing
expo at state fairgrounds. I was tying at our club's table (Indianaplis
Flycasters). After 7+ hours of tying and talking, I could barely talk this
morning. I couldn't figure out why I kept getting colder and
Good for you Rick.
I am currently sorting cutthroat flies for a fishing outing tomorrow (Sunday).
I have not fished for so long.
It is spring like here in BC - warm and rather wet which is not good. Once
again there is concern about the snowpack which has been melting already. This
does not
Went to the Hawkeye Fly Fishers meeting today and tied flies. Meet some nice
folks and learned some new things.
Rick
--
--
You received this message because you are subscribed to the "VFB Mail" group.
To post to this group, send email to vfb-mail@googlegroups.com
To unsubscribe from this
I have been trying to tie some California Blondes (No Allan not that type )
but have found them rather time consuming to tie. I have never tied this
pattern before so need some practice. Am heading out with my son for an
extended weekend but since all the local rivers except the largest are
] Namens
Anthony Spezio
Verzonden: zaterdag 8 maart 2014 13:44
Aan: vfb-mail@googlegroups.com
Onderwerp: Re: [VFB] Tying
Mart,
You were the first tyer from Europe that we had at the Sowbug. You are welcome
any time. Maybe I can get Dot to make spaghetti and meatballs again so we can
have
/showphoto.php?photo=421title=small-stonefly-needle-fly-coming-off-the-river-cluncat=506
Mart
*Van:* vfb-mail@googlegroups.com [mailto:vfb-mail@googlegroups.com] *Namens
*Michael Bliss
*Verzonden:* vrijdag 7 maart 2014 22:58
*Aan:* vfb-mail@googlegroups.com
*Onderwerp:* Re: [VFB] Tying
Mart
I have experimented with a herbal mix and chewing tobacco in some
containers and my entire room has the yellow strips, especially the
closet. The herbals was referenced in some of the original Roundtables
along with the tobacco.
Mothballs are actually poisonous if inhaled to ofter and very
was in 2002 – time
flies.
I hope you’ll have a great time!
Mart
Van:vfb-mail@googlegroups.com [mailto:vfb-mail@googlegroups.com] Namens Anthony
Spezio
Verzonden: vrijdag 7 maart 2014 16:44
Aan: vfb-mail@googlegroups.com
Onderwerp: Re: [VFB] Tying
Very nice, I hope you can get back here some
Yes, it’s that time of year again. Filling flyboxes for what I hope will be a
great fishing season.
Here’s a caddis emerger that’s done quite well for us.
http://globalflyfisher.com/patterns/cdl-caddis-emerger/
Mart
--
--
You received this message because you are subscribed to the VFB
Very nice, I hope you can get back here some day and tie this fly at the
Sowbug. The show has really grown. I think we will have over 135 tyers at this
show week after next.
I will have to tie this one.
Tony
On Friday, March 7, 2014 9:38 AM, MartinWestbeek martinwestb...@planet.nl
wrote:
Mart
I will show my ignorance - what is a needle fly?
Mike
On Fri, Mar 7, 2014 at 5:37 AM, MartinWestbeek martinwestb...@planet.nlwrote:
Yes, it's that time of year again. Filling flyboxes for what I hope will
be a great fishing season.
Here's a caddis emerger that's done quite well for
-needle-fly-coming-off-the-river-cluncat=506
Mart
Van: vfb-mail@googlegroups.com [mailto:vfb-mail@googlegroups.com] Namens
Michael Bliss
Verzonden: vrijdag 7 maart 2014 22:58
Aan: vfb-mail@googlegroups.com
Onderwerp: Re: [VFB] Tying
Mart
I will show my ignorance - what is a needle fly
– time
flies.
I hope you’ll have a great time!
Mart
Van: vfb-mail@googlegroups.com [mailto:vfb-mail@googlegroups.com] Namens
Anthony Spezio
Verzonden: vrijdag 7 maart 2014 16:44
Aan: vfb-mail@googlegroups.com
Onderwerp: Re: [VFB] Tying
Very nice, I hope you can get back here some day
On 3/7/14, 6:06 PM, MartinWestbeek wrote:
Wow, Tony, that's a lot! I have great memories of the Sowbug and I
would sure like to come again. But you know how it is -- time, money,
work and other commitments should be aligned to make it possible and
there's always one of those four that
http://www.flyanglersonline.com/alcampbell/ac020204.php
After raising a flock of genetics for over 15 years, read the above article
to see how I handled infestation possibilitys. Not only do we want to
repel, but also eliminate.
If you only use moth balls, you will not be covered.
Denny
--
of those
in every tree in our scamp spot to kill bugs. Chuck
-Original Message-
From: Conranch
Sent: Friday, March 07, 2014 5:24 PM
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Tying bugs
http://www.flyanglersonline.com/alcampbell/ac020204.php
After raising a flock of genetics for over
: [VFB] Tying bugs
http://www.flyanglersonline.com/alcampbell/ac020204.php
After raising a flock of genetics for over 15 years, read the above article
to see how I handled infestation possibilitys. Not only do we want to
repel, but also eliminate.
If you only use moth balls, you will not be covered
Chuck,
It's Spirit River Body Brite Bagged Purple
Garry
At 10:35 PM 12/5/2013, you wrote:
Garry: What exactly is the material??? Or did I miss that part?? Chuck
--
--
You received this message because you are subscribed to the VFB Mail group.
To post to this group, send email to
That sure is spiky looking dubbing.
Have you used it before Joyce?
Sent from my iPad
Thank You,
Alan Di Somma
Phoenix, AZ.
Some mistakes are just too much fun to make only once.
On Dec 5, 2013, at 9:26 PM, Joyce M Westphal joyce...@gmail.com wrote:
Here id a link
Gary,
Is this a Mylar braided tube like material. It might be what I was using that
came from Hobby Lobby. If it is, Wapsi now does now put it out in packages. I
am not sure what they call it. I use it in Pearl White for my White River
Demons. It comes is three different sizes. I have had it in
http://www.azflyfishing.net/proshop/home.php?cat=251
Try this page for a wide variety of dubbing.
I have used some of them but not all.
The ones I have used are great.
I am just a happy user, not related to him.
Sent from my iPad
Thank You,
Alan Di Somma
Phoenix, AZ.
Some mistakes are just
Howdy List!!
I know I don't post that often and sometimes read even
less. However, I'm looking for something and i hope the list can help.
First the back story:
The week before Thanksgiving I was invited to take a day trip up to
Erie, PA for some steelhead fishing. We discussed a few
Garry: What exactly is the material??? Or did I miss that part?? Chuck
-Original Message-
From: Garry Wiles
Sent: Thursday, December 05, 2013 9:16 PM
To: vfb-mail@googlegroups.com
Subject: [VFB] Tying Materials
Howdy List!!
I know I don't post that often and sometimes read even
less
On Dec 2013, at 10:16 PM, Garry Wiles wile...@comcast.net wrote:
It's Spirit River brand Body-Brite Bagged Purple.
Their Lite-bright dubbing is available on EBay. See of it looks like it.
--
--
You received this message because you are subscribed to the VFB Mail group.
To post to this
Here id a link http://www.bearsden.com/product12170.html I have used this
supplier with good results. Joyce
On Thu, Dec 5, 2013 at 9:20 PM, Allan Fish afi...@sbcglobal.net wrote:
On Dec 2013, at 10:16 PM, Garry Wiles wile...@comcast.net wrote:
It's Spirit River brand Body-Brite Bagged
http://www.youtube.com/watch?v=PfX9G3m9tOU (Preview)
--
--
You received this message because you are subscribed to the VFB Mail group.
To post to this group, send email to vfb-mail@googlegroups.com
To unsubscribe from this group, send email to
vfb-mail-unsubscr...@googlegroups.com
For more
Hi Wayne,
This may come as a shock to you, but I think my mind may be playing
tricks on me (AGAIN!)
Am I correct that your daughter is graduating from college this week?
I seem to remember that you won't be going up to Davisdonville to the
fs-ff tying class on Saturday?? If I'm mistaken, pls
TYING HIATUS
Rick,
I'll finish up next week. We're going to the Smoky's to do some fishing
this week.
a.
On 4/15/13 5:49 PM, Rick Zieger wrote:
Jimmy Moore swap
1. Jimmy Moore
2. Rene Zillman
3. Rick Zieger done
4. Mike Bliss
5. Don Ordes-
6. Alan Di Somma received
7. Tony Spezio
8.
Hi Tony,
I'm wondering what the weight of this light is like. The reason I ask is
that I have a concern about the shipping charges if I go for one.
Thanks
Ashley
Sorry about that happening, I guess it is a mater of policy.
If you still want it, I can probably get you one or you can get one
to take it as a Carry On so I
could keep it close to me and not have it go with the luggage.
Tony
--- On Sun, 9/30/12, ashley galeforce1...@gmail.com wrote:
From: ashley galeforce1...@gmail.com
Subject: Re: [VFB] Tying light set up
To: vfb-mail@googlegroups.com
Cc: Allan Fish afi...@sbcglobal.net
Now I have had a better look at the pictures, I can see that there isn't
a problem as the vice is the same as mine. So I can see that it isn't a
problem.
Ashley
I don' find any problem with the stem getting in the way, It is
adjustable up or down as is the angle of the lights. What I find
I like the look of Tonys light but do the lights that attach to the vice
stem get on the way?
Ashley
--
You received this message because you are subscribed to the VFB Mail group.
To post to this group, send email to vfb-mail@googlegroups.com
To unsubscribe from this group, send email to
that I could not see. A
friend in our tying group makes these lights but I have no financial interest
in them. If interested I can give you his E address.
Tony
--- On Tue, 9/25/12, ashley strutt galeforce1...@gmail.com wrote:
From: ashley strutt galeforce1...@gmail.com
Subject: [VFB] Tying light
I'll have to see if I can find it.
On Mon, Sep 24, 2012 at 6:08 PM, Wes Wada w...@wadaworks.com wrote:
Hi Robert,
I saw a 6-LED silver clamp light with a 3/8 spiral gooseneck at Harbor
Freight that I thought would work as a portable tying light. I think it
took four AA batteries.
Wes
Ott Lite makes a rechargable version of its folding lite. Go to your
'craft' store with their 40% off coupon.
Jack
Austin
On 9/24/2012 4:59 PM, Robert Morger wrote:
On the subject of portable lights any good daylight style or LED
battery operated ones out there?
--
You received this
...@shaw.ca
Subject: Re: [VFB] Tying light set up
To: vfb-mail@googlegroups.com
Date: Monday, September 24, 2012, 6:20 PM
I wanted to buy one of those when I attended the Sowbug last year.
Fred would not sell me one because he was supplying one of the
local fly tying shops
each.
Tony
--- On *Mon, 9/24/12, Neville Gosling
nev.gosl...@shaw.canev.gosl...@shaw.ca
* wrote:
From: Neville Gosling nev.gosl...@shaw.ca nev.gosl...@shaw.ca
Subject: Re: [VFB] Tying light set up
To: vfb-mail@googlegroups.com
Date: Monday, September 24, 2012, 6:20 PM
I wanted to buy
. They last for hours using
them in my lights.
Tony
--- On Tue, 9/25/12, ashley strutt galeforce1...@gmail.com wrote:
From: ashley strutt galeforce1...@gmail.com
Subject: Re: [VFB] Tying light set up
To: vfb-mail@googlegroups.com
Date: Tuesday, September 25, 2012, 10:55 AM
When I was originally
Hi all,
Seeing as though I no longer have uni assignments I find myself with alot
of tying time. I've been thinking recently about upgrading/restocking my
tying area. The only I think could be alot better is the lighting set up. A
moment I have a angle-pose desk light with day light bulb but I
Ashely,
I've got the little Ott folding task light that you can see in the
middle of this page:
http://www.ottlite.com/c-73-craft.aspx
Interestingly, they're cheaper in Europe, where they are called the
Ottlite 13 Wing Shade Table Lamp
@googlegroups.com] On Behalf
Of ashley strutt
Sent: Monday, September 24, 2012 12:20 PM
To: vfb-mail@googlegroups.com
Subject: [VFB] Tying light set up
Hi all,
Seeing as though I no longer have uni assignments I find myself with alot of
tying time. I've been thinking recently about upgrading
Our Ott is just like the folding pink one, except it’s white. Has a fold out
magnifier.
From: vfb-mail@googlegroups.com [mailto:vfb-mail@googlegroups.com] On Behalf
Of Allan Fish
Sent: Monday, September 24, 2012 12:57 PM
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Tying light set
Thank You,
Alan Di Somma
(I think she blushes only when she mentions she's married to me.)
ME TOO
--
I am using the free version of SPAMfighter.
SPAMfighter has removed 304 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try
I'm lost here is Ashley's Wife married to Alan too?
As far as lighting goes I have a folding lamp from Home Depot that
uses the daylight bulb like the Ott light also have stand light that
does the same. Cut a 45-60 degree angle part way into a piece of 2x4
or block of wood (approx. half way
No I just blush whenever I think of Allan..
Thank you,
Alan Di Somma
Sent from my iPad
Thank You,
Alan Di Somma
Phoenix, AZ.
On Sep 24, 2012, at 12:28 PM, Robert Morger rmor...@gmail.com wrote:
I'm lost here is Ashley's Wife married to Alan too?
As far as lighting goes I have a
I really like all the lights and lighting arrangements. I may combine some
of them. I am away from home till Friday when I can have a better look on a
computer screen then try and find the same thing in the UK.
Robert, I really like that back board idea, I will try it.
In regards to the wife
On the subject of portable lights any good daylight style or LED
battery operated ones out there?
--
I'd tell you to go to Hell, but I already work there and I wouldn't
want to see you everyday
--On a T-Shirt
Robert Morger
Central Texas
--
You received this message because you are subscribed
...@gmail.com
Subject: Re: [VFB] Tying light set up
To: vfb-mail@googlegroups.com
Date: Monday, September 24, 2012, 4:13 PM
I really like all the lights and lighting arrangements. I may combine some of
them. I am away from home till Friday when I can have a better look on a
computer screen
Hi Robert,
I saw a 6-LED silver clamp light with a 3/8 spiral gooseneck at Harbor
Freight that I thought would work as a portable tying light. I think it
took four AA batteries.
Wes
On Mon, Sep 24, 2012 at 2:59 PM, Robert Morger rmor...@gmail.com wrote:
On the subject of portable lights
photos and post later this evening.
Tony
--- On Mon, 9/24/12, ashley strutt galeforce1...@gmail.com wrote:
From: ashley strutt galeforce1...@gmail.com
Subject: Re: [VFB] Tying light set up
To: vfb-mail@googlegroups.com
Date: Monday, September 24, 2012, 4:13 PM
I really like all the lights
I love the light magnifier combo at http://www.nor-vise.com. Check it out.
He can make an adapter for a standard vise as well as one that fits the
norvise. I have one of each. Joyce
On Mon, Sep 24, 2012 at 11:19 AM, ashley strutt galeforce1...@gmail.comwrote:
Hi all,
Seeing as though I no
Hi,
when tying these flies on double hooks, how do you deal with the tail?
When I ty them in the middle of the base threads at the bend, they are
only held by the thread pressure from the base wrap and the tying
thread, and may slip out. - I'm talking about double hooks, and the base
wraps are
Hi Rene,
Have you tried touching thread wraps alternating over and under?
Mart
- Original Message -
From: Rene Zillmann rene.zillm...@t-online.de
To: vfb-mail@googlegroups.com
Sent: Sunday, January 16, 2011 12:59 PM
Subject: [VFB] Tying General Practitioner
Hi,
when tying
rene.zillm...@t-online.de
To: vfb-mail@googlegroups.com
Sent: Sunday, January 16, 2011 12:59 PM
Subject: [VFB] Tying General Practitioner
Hi,
when tying these flies on double hooks, how do you deal with the tail?
When I ty them i...
--
You received this message because you are subscribed
Come to think of it, how about putting the oval tinsel in the V on top of
the double shank?
Mart
- Original Message -
From: Rene Zillmann rene.zillm...@t-online.de
To: vfb-mail@googlegroups.com
Sent: Sunday, January 16, 2011 12:59 PM
Subject: [VFB] Tying General Practitioner
Hi
I was also going to mention the oval tinsel tag at the bend. This means that
the bucktail isn't tied directly over the gap where the shank of the double
hook splits.
Ashley
On 16 Jan 2011 12:08, Martin Westbeek martinwestb...@planet.nl wrote:
Come to think of it, how about putting the oval
- From: Rene Zillmann
rene.zillm...@t-online.de
To: vfb-mail@googlegroups.com
Sent: Sunday, January 16, 2011 12:59 PM
Subject: [VFB] Tying General Practitioner
Hi,
when tying these flies on double hooks, how do you deal with the tail?
When I ty them in the middle of the base threads at the bend
Here in Russellville my group is tying foam bass bugs size 6 and midges sizes
16 - 20.
Jerry McKaughan,President
Caddis Fly Fishing Club
P. O. Box 9104
Russellville, AR 72811
www.caddisflyfishers.org
--
You received this message because you are
Hi Tony;
Did you order two light from Walmart or Lowes?
Wayne
--- On Mon, 5/3/10, Anthony Spezio bambot...@yahoo.com wrote:
From: Anthony Spezio bambot...@yahoo.com
Subject: Re: [VFB] Tying Light Maybe?
To: vfb-mail@googlegroups.com
Date: Monday, May 3, 2010, 7:44 PM
Just ordered
Walmart., I thought I would try them. Actually I was talking to Dot about them
and she had my daughter order them. I have not checked Lowe's Web site.
Tony
--- On Tue, 5/4/10, Wayne Blake-Hedges wayneb22...@yahoo.com wrote:
From: Wayne Blake-Hedges wayneb22...@yahoo.com
Subject: Re: [VFB] Tying
...@yahoo.com wrote:
From: Anthony Spezio bambot...@yahoo.com
Subject: Re: [VFB] Tying Light Maybe?
To: vfb-mail@googlegroups.com
Date: Tuesday, May 4, 2010, 8:29 AM
Walmart., I thought I would try them. Actually I was talking to Dot about them
and she had my daughter order them. I have
...@yahoo.com wrote:
From: Wayne Blake-Hedges wayneb22...@yahoo.com
Subject: Re: [VFB] Tying Light Maybe?
To: vfb-mail@googlegroups.com
Date: Tuesday, May 4, 2010, 8:55 AM
Hi Tony;
Thanks!
I was curious if you were giving the Walmart Ott/knockoff a try. The light
Scott was using at Sow Bug was my
)
Walla Ott-Lite
Jerry McKaughan,President
Caddis Fly Fishing Club
P. O. Box 9104
Russellville, AR 72811
www.caddisflyfishers.org
Date: Tue, 4 May 2010 11:36:10 -0700
From: bambot...@yahoo.com
Subject: Re: [VFB] Tying Light Maybe?
To: vfb-mail@googlegroups.com
I was going
On 5/4/2010 1:36 PM, Anthony Spezio wrote:
I want them for lights to photograph flies.
I was wondering if that would be a good use for them. I've as yet been
unable to get good fly pics. I have instructions from a guy
this is a Micky Mouse way of doing it
but it works for me.
Tony
--- On Tue, 5/4/10, Rodger Oleson rodger...@argontech.net wrote:
From: Rodger Oleson rodger...@argontech.net
Subject: Re: [VFB] Tying Light Maybe?
To: vfb-mail@googlegroups.com
Date: Tuesday, May 4, 2010, 5:03 PM
On 5
Just ordered two of them. Should have them by the 14 th.
Tony
--- On Thu, 4/29/10, Chuck Alexander chuckalexan...@hughes.net wrote:
From: Chuck Alexander chuckalexan...@hughes.net
Subject: Re: [VFB] Tying Light Maybe?
To: vfb-mail@googlegroups.com, fly fishing for panfish
We JUST got home from town, but we made it to Lowes just as they were closing,
so I didn't get to check them out here. Chuck
- Original Message -
From: Anthony Spezio
To: vfb-mail@googlegroups.com
Sent: Monday, May 03, 2010 6:44 PM
Subject: Re: [VFB] Tying Light Maybe
a long
flexible arms that will adjust anyway up, down, sideways, you name it, which is
good for the not getting the light in my eyes. Chuck
- Original Message -
From: Joyce Westphal
To: vfb-mail@googlegroups.com
Sent: Friday, April 30, 2010 5:40 PM
Subject: Re: [VFB] Tying
Jack: Thanks for the tip. So the Ott light is taller than this light???
Chuck
- Original Message -
From: Jack Lehman jklepo...@sbcglobal.net
To: vfb-mail@googlegroups.com
Sent: Friday, April 30, 2010 6:38 PM
Subject: Re: [VFB] Tying Light Maybe?
I have one like that, sitting
-
From: Michael Bliss
To: vfb-mail@googlegroups.com
Sent: Friday, April 30, 2010 1:51 PM
Subject: Re: [VFB] Tying Light Maybe?
I have the Ott light that is very similar. I love the light but miss having
a long flexible arm on my light so I can position it where I want. My sister
priced ourselves
out of a job in many cases, Chuck
- Original Message -
From: Joseph Fusco, Sr.
To: vfb-mail@googlegroups.com
Sent: Friday, April 30, 2010 8:08 AM
Subject: Re: [VFB] Tying Light Maybe?
Chuck -
I have two that are very similar to the one you listed
Joyce: I couldn't find the light. I saw the magnifier, and the gallows tool. Am
I going to the wrong place?? Thanks, Chuck
- Original Message -
From: Joyce Westphal
To: vfb-mail@googlegroups.com
Sent: Friday, April 30, 2010 5:30 AM
Subject: Re: [VFB] Tying Light Maybe
. Am I going to the wrong place?? Thanks, Chuck
t
- Original Message -
*From:* Joyce Westphal westpha...@gmail.com
*To:* vfb-mail@googlegroups.com
*Sent:* Friday, April 30, 2010 5:30 AM
*Subject:* Re: [VFB] Tying Light Maybe?
Chuck, I have one with a flexible arm over my tying
this
light??? Chuck
- Original Message - From: Jack Lehman
jklepo...@sbcglobal.net
To: vfb-mail@googlegroups.com
Sent: Friday, April 30, 2010 6:38 PM
Subject: Re: [VFB] Tying Light Maybe?
I have one like that, sitting on a shelf. It provides plenty of light,
but I found that it was too
Can't afford all the bells and whistles some of you folks have. I don't
see very well, but manage to get by with a regular desktop gooseneck
lamp with one of those twisted fluorescent daylight bulbs. The one I'm
using now is a 15 watt'er, and does a decent job for me. I wouldn't
want to get
Thanks a lot, Chuck
- Original Message -
From: Joyce Westphal
To: vfb-mail@googlegroups.com
Sent: Saturday, May 01, 2010 7:29 AM
Subject: Re: [VFB] Tying Light Maybe?
Chuck, I've emailed Norm to find out if he can get the flexible arm lights
any more. I'll send you
Subject: Fwd: [VFB] Tying Light Maybe?
Can't afford all the bells and whistles some of you folks have. I don't
see very well, but manage to get by with a regular desktop gooseneck
lamp with one of those twisted fluorescent daylight bulbs. The one I'm
using now is a 15 watt'er
Chuck, I have one with a flexible arm over my tying desk made especially for
vises. You can check it out at http://www.nor-vise.com. I use it in combo
with a big magnifying one. Joyce
On Thu, Apr 29, 2010 at 10:05 PM, Chuck Alexander chuckalexan...@hughes.net
wrote:
Has anybody tried to tie
*Chuck -*
**
*I have two that are very similar to the one you listed. They are both more
than adaquate as tying lights. I also have an OTT light which cost three
times as much and is no better.*
*--
Joe Fusco, Sr.
Member of The Missouri Trout Fishermen’s Association, The International
...@yahoogroups.com
*Sent:* Thursday, April 29, 2010 11:05 PM
*Subject:* [VFB] Tying Light Maybe?
Has anybody tried to tie with one of these??? Are they bright enough?? I
like the full spectrum part of it. Maybe if you had two of these to tie
by??? I think I'll buy one just to see how bright
@googlegroups.com ; fly fishing for
panfishflyfishingandflytyingforpanf...@yahoogroups.com
*Sent:* Thursday, April 29, 2010 11:05 PM
*Subject:* [VFB] Tying Light Maybe?
Has anybody tried to tie with one of these??? Are they bright enough?? I
like the full spectrum part of it. Maybe if you had two
I have one like that, sitting on a shelf. It provides plenty of light,
but I found that it was too short, I had to clamp it to something to
make it work.
Ott lights are great. Yes, they are expensive, but I find them in the
craft stores, and use those 40% off coupons that are usually in the
Has anybody tried to tie with one of these??? Are they bright enough?? I like
the full spectrum part of it. Maybe if you had two of these to tie by??? I
think I'll buy one just to see how bright they really are. I know 13watts in
this type bulbs don't put out a whole lot of light, but if the
- Original Message -
From: Chuck Alexander
To: vfb-mail@googlegroups.com ; fly fishing for panfish
Sent: Thursday, April 29, 2010 11:05 PM
Subject: [VFB] Tying Light Maybe?
Has anybody tried to tie with one of these??? Are they bright enough?? I like
the full spectrum part
flyfishingandflytyingforpanf...@yahoogroups.com
Sent: Sunday, January 3, 2010 10:34:48 PM GMT -05:00 US/Canada Eastern
Subject: [VFB] Tying Small Flies...
Folks: I have a question on tying flies smaller than , say, a size 16. Or a
size 14 in some cases. Like, how do you get all the materials tied
16 14 aren't small, try a 22J
From: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] On Behalf
Of Chuck Alexander
Sent: Sunday, January 03, 2010 9:35 PM
To: vfb-mail@googlegroups.com; fly fishing for panfish
Subject: [VFB] Tying Small Flies...
Folks: I have a question on tying
: [VFB] Tying Small Flies...
16 14 aren’t small, try a 22 J
From: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] On Behalf Of
Chuck Alexander
Sent: Sunday, January 03, 2010 9:35 PM
To: vfb-mail@googlegroups.com; fly fishing for panfish
Subject: [VFB] Tying Small Flies
ahh come on, let's do a#28, #30 or #32 swap, if somebody will host
a small number of tyers(10 or less) I'll tye
BobH
I've never hosted a swap, so it's about time I do.
Limit: First 10 tyers (including me, that makes 11) but you only
tie 10 flies.
NO increase. TEN. MAXIMUM
Re: [VFB] Tying Small Flies...Count me in...
- Original Message -
From: Allan Fish
To: vfb-mail@googlegroups.com
Sent: Monday, January 04, 2010 9:43 AM
Subject: Re: [VFB] Tying Small Flies...
ahh come on, let's do a#28, #30 or #32 swap, if somebody will host a small
Allan,
I bite!
WHat type of flies? Steamer, Salmon, dry, nymph, wet.
Rene
Allan Fish wrote:
ahh come on, let's do a#28, #30 or #32 swap, if somebody will host a
small number of tyers(10 or less) I'll tye
BobH
I've never hosted a swap, so it's about time I do.
Limit: First* 10* tyers
OK, this is definitely for me. Count me in PLEASE!
George Vincent
_
From: vfb-mail@googlegroups.com [mailto:vfb-m...@googlegroups.com] On Behalf
Of haerb...@comcast.net
Sent: Monday, January 04, 2010 11:01
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Tying Small Flies...
ahh
Rene,
Whatever you want to tie as long as it's size #28, #30 or #32.
a.
--
Allan Fish
Greenwood, IN
afi...@sbcglobal.net
--
You received this message because you are subscribed to the VFB Mail group.
To post to this group, send email to vfb-mail@googlegroups.com
To unsubscribe from this
Allan
Count me in
Jerry McKaughan,President
Caddis Fly Fishing Club
P. O. Box 9104
Russellville, AR 72811
www.caddisflyfishers.org
From: f...@tribcsp.com
To: vfb-mail@googlegroups.com
Subject: Re: [VFB] Tying Small Flies...
Date: Mon, 4 Jan 2010 09:55:06 -0700
Count me
@googlegroups.com
Sent: Monday, January 04, 2010 10:22 AM
Subject: Re: [VFB] Tying Small Flies...
Rene,
Whatever you want to tie as long as it's size #28, #30 or #32.
a.
--
Allan Fish
Greenwood, IN
afi...@sbcglobal.net
--
You received this message because you are subscribed to the VFB
You game Alan? How about a Highlander?
BobH
- Original Message -
From: Alan Di Somma phxflyt...@cox.net
To: vfb-mail@googlegroups.com
Sent: Monday, January 4, 2010 7:04:53 PM GMT -05:00 US/Canada Eastern
Subject: Re: [VFB] Tying Small Flies...
I think you shoud tie a Salmon fly
You game Alan? How about a Highlander?
BobH
I don't know if Alan is game or not, but my memory of him is that
he's a bit gamey.;-)
Duckin' and runnin'
Allan with-a-DOUBLE-L
--
Allan Fish
Greenwood, IN
afi...@sbcglobal.net
--
You received this message because you are subscribed to the
I have, and to me a 14 and 16 IS small, Chuck
- Original Message -
From: J Balmer
To: vfb-mail@googlegroups.com
Sent: Monday, January 04, 2010 8:28 AM
Subject: RE: [VFB] Tying Small Flies...
16 14 aren't small, try a 22J
From: vfb-mail@googlegroups.com
Folks: I have a question on tying flies smaller than , say, a size 16. Or a
size 14 in some cases. Like, how do you get all the materials tied into (or
onto LOL) a Royal Wolff)??I have been reading as much as I can about bluegill
fly fishing and fly tying,.and I was just reading about tying
chuckalexan...@hughes.net
Sent: Sunday, January 03, 2010 8:34 PM
To: vfb-mail@googlegroups.com; fly fishing for panfish
flyfishingandflytyingforpanf...@yahoogroups.com
Subject: [VFB] Tying Small Flies...
Folks: I have a question on tying flies smaller than , say, a size 16. Or a
size 14 in some cases
1 - 100 of 110 matches
Mail list logo