are not passing
across the Layer 3 switch. Best I can tell I have multicasting setup on the
switch but documentation is scarce. Anyone try this before? Good or Bad?
Mark McElvy
AccuBak Data Systems, inc.
WISPA Wants
) are connected together with a crossover. Any
thoughts on why just this one radio would blow the ether port?
Mark McElvy
WISPA Wants You! Join today!
http://signup.wispa.org
This person is interested in wireless if anyone can help
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: cheryl evenson [mailto:ckeven...@hotmail.com]
Sent: Wednesday, July 14, 2010 10:07 AM
To: Mark McElvy
Subject: Keya Paha Co
Nebraska, 30 miles east off Highway 12
Yes powered up and working fine from wireless side, no link on Ethernet
Mark McElvy
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Wednesday, July 14, 2010 4:14 PM
To: 'WISPA General List'
Subject: Re: [WISPA] NS2
I am finding the list of applications but not where to protest
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Brian Webster
Sent: Wednesday, May 19, 2010 3:51 PM
To: spie...@avolve.net; 'WISPA General List'
Subject: Re: [WISPA] Filing
-- Original Message --
From: Mark McElvy mmce...@accubak.com
Reply-To: WISPA General List wireless@wispa.org
Date: Wed, 19 May 2010 20:57:57 -0500
I am finding the list of applications but not where to protest
-Original Message-
From: wireless-boun
Ok, dumb question time. How does electrical downtilt work on an omni?
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Tuesday, March 30, 2010 9:50 PM
To: sarn...@info-ed.com; WISPA General List
Subject: Re: [WISPA]
It projects a cone instead of a disc.
Greg
On Mar 31, 2010, at 7:56 AM, Mark McElvy wrote:
Ok, dumb question time. How does electrical downtilt work on an omni?
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
On
Behalf Of Josh Luthman
Sent: Tuesday
I am still having troubles with an AP. One of three on a water tower, MT
3.30, RB532A/WLM54G30-ESD, 802.11B/20 and PPPoE via Radius. What seems
to be happening, subs are staying associated but losing PPPoE
authentication. You see authentication request over and over again.
Radius on the AP shows
to a different port on the switch. Is it possible I have
a bad Ethernet cable?
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today!
http://signup.wispa.org
.
Tower end see's them @-85 with -99 noise.
I have a feeling its interference/noise but do not have a Spectrum
analyzer to confirm. Did realize the there is a direct line from client
to my tower to competitors tower. Client to my tower 6 miles and another
6 miles to competitors tower.
Mark McElvy
I use a small tiewrap around the end to prevent that from happening.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Greg Ihnen
Sent: Tuesday, March 02, 2010 6:36 AM
To: WISPA General List
Subject: Re: [WISPA] Moisture Abatement
www.mowinet.com
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Blair Davis
Sent: Monday, February 15, 2010 6:40 PM
To: WISPA General List
Subject: [WISPA] Reflector grid or dish for NS2/NS2L
I am looking for reflectors that can be used with the NS2 or
on one cable...
On 2010-01-14 15:47, Mark McElvy wrote:
I would if I had my brain wrapped around VLan's
What equipment are you using? We could provide some guidance...
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun
, 10.25.1.x and 172.22.1.x and 172.22.255.x all plugged
into the same switch?
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today!
http://signup.wispa.org
I would if I had my brain wrapped around VLan's
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jeremy Parr
Sent: Thursday, January 14, 2010 2:15 PM
To: WISPA General List
Subject: Re: [WISPA
I would say you need one that will furl in high winds.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Randy Cosby
Sent: Thursday, January 14, 2010 5:19 PM
To: WISPA General List
Subject: [WISPA] wind turbine
Anyone using wind turbines
vary given your topology and broadcast site density.
Rick Harnish
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
On
Behalf Of Mark McElvy
Sent: Tuesday, December 01, 2009 10:51 PM
To: WISPA General List
Subject: [WISPA] Sectors
I am
I need to sector a tower that currently is an omni. I don't really want
to go to 3x 120's but find it hard to find 180's and have heard they
don't tend to work great. I have also heard 2x 120's will work, any
comments?
Mark
coverage then three 120s but at the cost of the
extra radio/antenna it isn't cost efficient.
On 12/1/09, Mark McElvy mmce...@accubak.com wrote:
I need to sector a tower that currently is an omni. I don't really
want
to go to 3x 120's but find it hard to find 180's and have heard
.3dbnetworks.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mark McElvy
Sent: Tuesday, December 01, 2009 8:29 PM
To: WISPA General List
Subject: Re: [WISPA] Sectors
9db
-Original Message-
From: wireless-boun...@wispa.org
Ok, I went out the problem customer and switched them to bridged mode
and set their router to do PPPoe and ShaZam, all is good. Why is this
only happening with some of the CPQ's and not all?
Thanks Marlon.
Mark McElvy
AccuBak Data Systems, Inc
No I say he is referring to the NS2's and Loco's. Having to push down on
the tab and the get the cover to slide can be annoying. It would be nice
if there was a thumb grip area on the cover to allow traction;)
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun
The trees/ brush grew up, when installed the signal was more like -78.
The problem is I have other towers/ aps with similar customers, ones
whose links have degraded over time due to foliage and those AP's seem
fine.
Mark McElvy
-Original Message-
From: wireless-boun...@wispa.org
Is there firmware on the Ubiquity radio cards that can be updated via
Mikrotik?
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today!
http://signup.wispa.org
equipment willing to talk on the phone to
discuss this problem?
Mark McElvy
AccuBak Data Systems, Inc.
573.247.9980 - Cell
WISPA Wants You! Join today!
http://signup.wispa.org
24v on a RB532/XR2 @ 200ft
Mark McElvy
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, November 05, 2009 9:55 AM
To: WISPA General List
Subject: Re: [WISPA] Frustrating connectivity issues.
What POE
. Customer says the online game they play will take several
attempts to connect but once connected it works great.
Someone else suggested power but tried different power supplies with
same result. These are Tranzeo CPQ's as clients and MT AP/RB532/XR-2/120
16db HPol.
Mark McElvy
AccuBak Data
.
Mark McElvy
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Wednesday, November 04, 2009 5:33 PM
To: Mikrotik discussions
Cc: WISPA General List
Subject: Re: [WISPA] [Mikrotik] Frustrating connectivity issues
I have one of my towers that has grown to 32 subs, This is a MT ap and I
hear that is the magic limit. The only current issue I have with it CPU
maxing out at peak times and I am planning a board swap for that. I was
also thinking of sectoring but do not feel the need for three. Having a
hard
I have a wireless backhaul link that is not as stable as I would like.
It is a 15.5 mile shot that has been up for 3 years. MT/CM9/32db dish on
both ends. On a clear day I am only seeing a -83 on each end. All the
radio equip was replaced April 08 due to lighting, still have the
original 3ft
...@wispa.org] On
Behalf Of Travis Johnson
Sent: Monday, October 26, 2009 3:33 PM
To: WISPA General List
Subject: Re: [WISPA] Link stability
Hi,
According to my path calculator, this link should be -55 on each side.
Are you sure it was aligned when it was first installed?
Travis
Microserv
Mark McElvy
, but it is additional protection.
On Mon, Oct 26, 2009 at 02:39:47PM -0500, Mark McElvy wrote:
I have a wireless backhaul link that is not as stable as I would like.
It is a 15.5 mile shot that has been up for 3 years. MT/CM9/32db dish
on
both ends. On a clear day I am only seeing a -83 on each end. All the
radio
Yes, the pigtail was replaced, just not the coax and antenna. It is a
PacWireless dish
Mark
WISPA Wants You! Join today!
http://signup.wispa.org/
I have 4 two ft dishes that where pulled down when the previous wisp
went out of business. There are no markings on them and I need to
determine frequency and polarity.
Mark McElvy
AccuBak Data Systems, Inc
These appear to be Pac Wireless dishes. Is there any instructions on
setting the polarity? I seem to remember setting up an new Pac dish and
there where instructions showing the polarity setting based on a pin on
the feed horn.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message
I happen to know they are either 5.8 or 2.4 as this was the only
equipment I have found of theirs, they left it all when they went out of
business.
Mark McElvy
AccuBak Data Systems, Inc.
573.729.9200 - Office
573.729.9203 - Fax
573.247.9980 - Mobile
http://www.accubak.com/
http://www.accubak.net
.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
When you have eliminated the impossible, that which remains,
however
improbable, must be the truth.
--- Sir Arthur Conan Doyle
On Wed, Oct 21, 2009 at 10:34 AM, Mark McElvy mmce
St
Suite 1337
Troy, OH 45373
When you have eliminated the impossible, that which remains,
however
improbable, must be the truth.
--- Sir Arthur Conan Doyle
On Wed, Oct 21, 2009 at 10:34 AM, Mark McElvy mmce...@accubak.com
wrote:
I happen to know they are either 5.8 or 2.4
We were solicited for purchase by this company today. Anyone have
anything to share about them?
Mark
WISPA Wants You! Join today!
http://signup.wispa.org/
Where do you get or call those 1ft long wires?
Mark McElvy
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marlon K. Schafer
Sent: Monday, October 19, 2009 9:09 AM
To: WISPA General List
Subject: Re: [WISPA] Gotta Have
Travis
I use 50ft (about 45ft actual) Rohn telescoping mast for site surveys
when I need height. We have lots of massive trees. And we regularly
extend them full height while holding them about 15 to 20 ft up.
Mark
-Original Message-
From: wireless-boun...@wispa.org
but it did not want to associate.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marlon K. Schafer
Sent: Friday, October 16, 2009 8:45 AM
To: WISPA General List
Subject: Re: [WISPA] New install driving me
multipath.
marlon
- Original Message -
From: Mark McElvy mmce...@accubak.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, October 15, 2009 2:30 PM
Subject: [WISPA] New install driving me crazy
Installing a new customer, Tranzeo CPQ-19 to a MT AP, -60 signal
up/dn,
-102 noise
the mass of oak trees. I added 10ft to the mast and
to 19db radio went to -56~ so I swapped the radio to a 15db version.
This is a 2.7 Mile link. It is going to be rather hard to move.
Mark McElvy
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf
My radio is the router/PPPoE client. Yes their indoor AP is routing also
but I see issue when connected directly with my laptop.
Mark McElvy
AccuBak Data Systems, Inc.
573.729.9200 - Office
573.729.9203 - Fax
573.247.9980 - Mobile
http://www.accubak.com/
http://www.accubak.net/
Nationwide
times sporadically along with drop pings. Best of my
knowledge no one else having issue on this AP, about a dozen users.
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today!
http
on the tower?
Is the tower linked to a CPE that is linked to your main tower (poor
mans repeater?)
ryan
On Thu, Oct 15, 2009 at 2:30 PM, Mark McElvy mmce...@accubak.com
wrote:
Installing a new customer, Tranzeo CPQ-19 to a MT AP, -60 signal
up/dn,
-102 noise. About half the time I don't get name
be the truth.
--- Sir Arthur Conan Doyle
On Thu, Oct 15, 2009 at 5:35 PM, Ryan Spott rsp...@cspott.com wrote:
How many subs on the tower?
Is the tower linked to a CPE that is linked to your main tower (poor
mans repeater?)
ryan
On Thu, Oct 15, 2009 at 2:30 PM, Mark McElvy mmce...@accubak.com
totals for a given time period. Anyone know of software
I can run against the FreeRadius accounting data to get this info or
have any Freeside customization that would like to share to do this?
I am looking at bitcap bill if you have not guessed;)
Mark McElvy
AccuBak Data Systems, Inc
FROM
radacct where acctstarttime BETWEEN '2009-06-01' and '2009-07-01' group
by
username;
Tim
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
On
Behalf Of Mark McElvy
Sent: Monday, October 12, 2009 8:51 AM
To: WISPA General List
Subject: [WISPA
or remedy without moving
the radio to a totally different location?
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today!
http://signup.wispa.org
First radio Tranzeo CPQ15 second was a Ubiquity NS2. I never noticed a
signal fluctuation.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Tuesday, September 29, 2009 1:54 PM
I am on the same AP with no issue and other customers are not talking if
they are having issues.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Tuesday, September 29, 2009 2
I suppose that is a good term, I would like to be able to redistribute
service to small pockets of houses, 6-12, without putting up a full
blown AP/BH setup. Any one else doing this? I normally use 5.8 for BH
typically and 2.4 for clients, I was thinking of maybe using a PS2 to
receive/BH and
20 Meg would cost me 5k.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Tuesday, September 22, 2009 10:22 AM
To: WISPA General List
Subject: Re: [WISPA] Net Neutrality
$1500 for 20 megs here. Nearly double
What are you using to tabulate your accounting data?
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of David Sovereen
Sent: Tuesday, September 22, 2009 10:27 AM
To: WISPA General List
Subject: Re
Are you saying you have a RADIUS server that can read AD's users or are
you using Microsoft's IAS as a RADIUS server? You could have Freeside
setup to do your new hotspot users, accounts setup automatically via the
Mikrotik interface.
Mark McElvy
AccuBak Data Systems, Inc.
-Original
I am curious about 900 noise. My 2.4 gear sees noise levels of about -98 to
-102, but the XR9 setup I have with H120 sector see -80 to -85 or so. I am in a
small town of 5000 and I am curious what might be generating such a high noise
floor.
Mark McElvy
AccuBak Data Systems, Inc
If I did not mount on roofs I would not do many installs, most of my
installs consist of 3ft tripod with 10ft mast or 30ft mast on roof peak
with guy wires.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marlon K. Schafer
Sent:
using that needs this extra effort?
On 8/30/09, Mark McElvy mmce...@accubak.com
mailto:mmce...@accubak.com wrote:
If I did not mount on roofs I would not do many installs, most
of my
installs consist of 3ft tripod with 10ft mast or 30ft mast on
roof peak
with guy wires
The solar list that I participate in recommend not using the charge
controller included in that kit as it is junk. They always recommend
MorningStar for like $60.00.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of ralph
Sent:
No negative comments, they seem to be fine.
Mark McElvy
AccuBak Data Systems, Inc.
573.729.9200 - Office
WISPA Wants You! Join today!
http://signup.wispa.org
symmetrical up/down. I do not see this on my other AP's with
the same style arrestor. Any ideas? I tried two different arrestors with
the same result.
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You
It has an adaptive mode which does both.
Mark
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Brian Rohrbacher
Sent: Thursday, April 30, 2009 2:31 PM
To: WISPA General List
Subject: Re: [WISPA] WAN HotSpot and Polarity
Dual polarity as in you are
Have you looked at Trendnet routers? They have a repeater mode.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Aaron D. Osgood
Sent: Monday, April 27, 2009 11:21 AM
To: 'WISPA General List
I would like to offer a customer rackspace at my office. Two 2U servers
with UPS provided by customer and put in our rack. Managed by us.
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today
I guess I should have finished with how do you price such a thing.
I would like to offer a customer rackspace at my office. Two 2U servers
with UPS provided by customer and put in our rack. Managed by us.
Mark McElvy
AccuBak Data Systems, Inc
We have a special event coming to town and I want to provide Hotspot
access for them. I already have a hotspot setup for users around town. I
want to setup a second hotspot with custom pages for the event users.
Can I have separate HTML?
Mark
Only losing the route to the client that is created by OSPF/PPPoE. I am
running the latest Firmware and have tried 2.9.51 but went back to 50 as
that is what is sy=table on the others.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org
with the AP. Log shows disconnect, OSPF route to client
disappears but the PPPoE session stays.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Paolo Di Francesco
Sent: Wednesday, February 04, 2009 10
I am downloading it now...
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Brian Webster
Sent: Wednesday, February 04, 2009 1:21 PM
To: WISPA List; memb...@wispa.org; Motorola Canopy List
Subject
Any known issue taking a RB532 (not 532A) to 3.x?
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jim Patient
Sent: Wednesday, February 04, 2009 1:55 PM
To: WISPA General List
Subject: Re: [WISPA
Can I go straight from 2.9.50 to 3.20?
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jim Patient
Sent: Wednesday, February 04, 2009 2:11 PM
To: WISPA General List
Subject: Re: [WISPA] Lost
session will still show in the active connections window.
If I disconnect the active session the client will reconnect.
Any thoughts?
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today!
http
I have the pipe type on one of my water towers, where do you get and
what do you call the device to connect to it?
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Scottie Arnett
Sent: Thursday, January 08, 2009 12:31 PM
To: WISPA
out.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--
From: Mark McElvy mmce...@accubak.com
Sent: Wednesday, December 17, 2008 5:18 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] wholesale bandwidth
I have a new WAN connection, it is a Long range Ethernet connection. It
is being connected to a RB532 Mikrotik v2.9.46 router. When I do
bandwidth tests through this connection, it is very erratic. If I
connect the circuit directly to a PC I get a nice smooth throughput. I
also tried connecting
of
antenna.
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Mark McElvy mmce...@accubak.com
Date: Mon, 15 Dec 2008 13:58:25
To: mikro...@mail.butchevans.com; wireless@wispa.org
Subject: [WISPA] Winter connectivity issues
I have 4 tower locations, only one seems
I am looking for wholesale bandwidth providers to either St Louis or
Rolla Missouri.
Mark
WISPA Wants You! Join today!
http://signup.wispa.org/
Sent: Wednesday, December 17, 2008 4:48 PM
To: WISPA General List
Subject: Re: [WISPA] wholesale bandwidth
Mark McElvy wrote:
I am looking for wholesale bandwidth providers to either St Louis or
Rolla Missouri.
Do you need it delivered to your door, or just somewhere in town?
Saint Louis has
I have 4 tower locations, only one seems to be having issues. Last week,
then today I have a few customers on one tower having slow connection
issues. High ping times from less than 1 ms to 4-500ms with packet loss.
The one complaining customer has a -56 @ client end and -60 @ AP. The
common
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mark McElvy
Sent: Monday, December 15, 2008 2:58 PM
To: mikro...@mail.butchevans.com; wireless@wispa.org
Subject: [WISPA] Winter connectivity
it, poorly.
--- Henry Spencer
On Mon, Dec 15, 2008 at 4:59 PM, Mark McElvy mmce...@accubak.com
wrote:
The ones that seem to have issues are close and LOS the further ones
seem to be ok.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org
on the same AP?
On 12/15/08, Mark McElvy mmce...@accubak.com wrote:
Signal levels are stable. Ping times are erratic and Customers
complain
of slow internet. PPPoE will not stay connected.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org
on that one AP? Or all of the Tranzeo CPEs on that AP?
On 12/15/08, Mark McElvy mmce...@accubak.com wrote:
12, all Tranzeo CPQ except one.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]
On
Behalf Of Josh Luthman
Sent: Monday, December
Did that.
Mark McElvy
AccuBak Data Systems, Inc.
573.729.9200
-Original Message-
From: Jeff Broadwick [EMAIL PROTECTED]
Sent: Monday, October 27, 2008 20:38
To: 'WISPA General List' wireless@wispa.org
Subject: Re: [WISPA] Tool to find out if you might have
whitespacesspectrumavailable
I guess I am missing something, no matter where I look I see no contour
lines.
Mark McElvy
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Webster
Sent: Sunday, October 26, 2008 9:28 PM
To: WISPA List
Cc: Stephen Coran
Subject: [WISPA] Tool
I sorry, but by your definition ALL email is spam if you did not
specifically ask for it. If I emailed you directly I would be spamming
you unless I called and asked first.
Mark
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Paul Dowling
Sent:
antennae and everything seemed back to normal.
Well Saturday morning I was checking things out and its back to the
reduced signals. I am at a loss as to what to do. Since Tuesday we have
had clear skys, cool temps at night and lots of dew.
Mark McElvy
AccuBak Data Systems, Inc
Is there a good way to test how a radio card is performing? I have
several mini-PCI radios, XR2, CM-9, etc, that I need to determine if
they are performing to specification. They are in the office on the
bench.
Mark McElvy
AccuBak Data Systems, Inc
Just wondering if there are others doing DSL along with their wireless?
Would like a product recommendation and source.
Thanks
Mark McElvy
AccuBak Data Systems, Inc.
WISPA Wants You! Join today!
http
Well actually was referring to a DSL modem recommendation...
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jerry Richardson
Sent: Tuesday, August 12, 2008 2:36 PM
To: WISPA General List
Subject: Re: [WISPA] OT
End user DSL modem recommendation.
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Randy Cosby
Sent: Tuesday, August 12, 2008 3:37 PM
To: WISPA General List
Subject: Re: [WISPA] OT - DSL Modem recomendation
Just
Well we are looking at wholesaling through Socket. We are mainly in
Embarq territory. I there a better way to go?
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Charles Wyble
Sent: Tuesday, August 12, 2008 3:48 PM
or this morning but now I am at my office and see that my radio at
home has connected.
I at first thought the lightening deafened my radio but I am kinda
thinkin moisture now. Thoughts?
Mark McElvy
AccuBak Data Systems, Inc
But why would it be getting better?
Mark McElvy
AccuBak Data Systems, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Travis Johnson
Sent: Saturday, July 26, 2008 3:26 PM
To: WISPA General List
Subject: Re: [WISPA] Weird signal levels
The radio
. If anyone can help that is close by, 4to 5 hr drive,
please call.
Mark McElvy
AccuBak Data Systems, Inc.
573.247.9980 - Mobile
WISPA Wants You! Join today!
http://signup.wispa.org
When run on Vista, it does not pick up the default gateway and under
Vista and XP Pro it does not pickup the Subnet mask.
Mark
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Larry Yunker
Sent: Saturday, June 21, 2008 4:03 PM
To: 'WISPA General List'
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mark McElvy
Sent: Sunday, June 22, 2008 8:56 PM
To: WISPA General List
Subject: Re: [WISPA] FW: [WISP] Internet Monitor - new release posted
When run on Vista, it does not pick up the default gateway and under
Vista
1 - 100 of 175 matches
Mail list logo
