On 8/1/2021 9:13 PM, MIKE LAVELLE via wsjt-devel wrote:
What's wrong with signal reports... lots of us like to know how well we
are getting out.
But signal reports only tell us signal to noise ratio in the other
station's receiver, NOT signal strength. I use WSJT modes on 6M and 160M
to make
Hi George ...
What's wrong with signal reports... lots of us like to know how well we are
getting out.
I also like contesting and appreciate the shorter exchange of contest more when
contesting. I've also seen this mode used by FFMA 6m grid chasers (myself
included). All well and good.
Good evening all,
Today I installed WSJT-X 2.5.0-rc4 and I had a situation today that I
had never had before and I am not sure that it is specific to this
version of WSJT-X, but there was a station calling CQ, OE21FTDMC, and
although I clicked on his CQ in the Band Activity window, it would
How is he harassing you? He's asking for more details. Just pasting
the pic of the error box does nothing whatsoever. That same box pops
up when I start WSJT-X without having the rig turned on. The 'More
Details" button will supply a lot more information about the cause.
Neil, KN3ILZ
Going back to my original suggestion - I do not seek to banish signal reports
for those that want them, certainly. Only set the -default- VHF condition to
grids-only QSOs. This would have the immediate advantage of substantially
untying the mess that crops up too often between users in CM
On 01/08/2021 23:10, Rory Bowers via wsjt-devel wrote:
I am running an AMD Quad Core Phenom II processor and 1Tb solid state
drive. The computer is an HP Pavillion but has been upgraded. The
computer has 8GB of physical memory and 15.2 GB of virtual memory..
Running under Windows 10 ver
I am running an AMD Quad Core Phenom II processor and 1Tb solid state
drive. The computer is an HP Pavillion but has been upgraded. The
computer has 8GB of physical memory and 15.2 GB of virtual memory..
Running under Windows 10 ver 10.0.19043 build 19043. I currently have 7.25
GB of Page File
Rory,
and I am trying to help you help us!
Here is the text of your original post:
"After installing rc-4 It came up and looked like everything was fine
but when I double clicked on a station I wanted to work that was
highlighted I get the Rig Control Failure error. Oddly enough when I
Knock off the harassment Bill... just trying to help here OM.
On Sun, Aug 1, 2021 at 4:28 PM Bill Somerville via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Rory,
>
> do you not see the button labelled "Show Details ..."?
>
> BTW on MS Windows you can copy the full text of the error
This is very strange... totally unpredictable but easily verified.
Sometimes I get the error and sometimes I don't. It doesn't seem to make
any difference if the station is highlighted or not. I have not been able
to select any station more than twice before I get the error again.
CTRL+double
Rory,
do you not see the button labelled "Show Details ..."?
BTW on MS Windows you can copy the full text of the error message
window, including the details by simply hitting Ctrl+C as soon as the
message box pops up, do not attempt to select or highlight the text,
just hit Ctrl+C. Then
[image: image.png]
Rory, K5CKS
On Sun, Aug 1, 2021 at 4:15 PM Bill Somerville via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> On 01/08/2021 22:05, Rory Bowers via wsjt-devel wrote:
>
> After installing rc-4 It came up and looked like everything was fine but
> when I double clicked
Rory,
well obviously more than one otherwise I would not have asked for the
details!
73
Bill
G4WJS.
On 01/08/2021 22:17, Rory Bowers via wsjt-devel wrote:
How many Rig Control Failure errors are there???
On Sun, Aug 1, 2021 at 4:15 PM Bill Somerville via wsjt-devel
How many Rig Control Failure errors are there???
On Sun, Aug 1, 2021 at 4:15 PM Bill Somerville via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> On 01/08/2021 22:05, Rory Bowers via wsjt-devel wrote:
>
> After installing rc-4 It came up and looked like everything was fine but
> when I
On 01/08/2021 22:05, Rory Bowers via wsjt-devel wrote:
After installing rc-4 It came up and looked like everything was fine
but when I double clicked on a station I wanted to work that was
highlighted I get the Rig Control Failure error. Oddly enough when I
double click on a station that is
After installing rc-4 It came up and looked like everything was fine but
when I double clicked on a station I wanted to work that was highlighted I
get the Rig Control Failure error. Oddly enough when I double click on a
station that is NOT highlighted I DON'T get the error. Going back to rc-3.
OK, Bill. Then I was on the wrong train. It's quite a bit puzzling, when
some data is displayed in cqrlog by answering a call, but not the whole
data.
So it's okay for me to change my way of logging the QSOs. It makes more
clear, why I don't have to change the apps to log the QSO. With pushing
On 8/1/2021 1:30 PM, Bill Somerville via wsjt-devel wrote:
read my post again, and also the Region 1 VHF handbook! The term is "QSO
specific" information, a grid is not QSO specific it is general
information about a station. I
YES, a grid IS QSO-specific -- operators move around. Just because
Presumably you are not running Rig Split?
Mike W9MDB
On Sunday, August 1, 2021, 03:50:37 PM CDT, Rory Bowers via wsjt-devel
wrote:
No problems here... rc-4 came up and so far is running fine on my
IC-7610.Rory, K5CKS___
wsjt-devel mailing
No problems here... rc-4 came up and so far is running fine on my IC-7610.
Rory, K5CKS
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Cornel,
WSJT-X does not send the grid of stations calling via UDP status updates
unless it is a decoded message containing a grid, or if the user fills
in the DX Grid field, either manually or by double-clicking a decode
containing a grid square.
I reiterate, the Log QSO button and dialog
You were right Joe... reload page. Thanks!
Rory, K5CKS
On Sun, Aug 1, 2021 at 1:49 PM Joe Taylor via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> On 8/1/2021 2:32 PM, Rory Bowers K5CKS via wsjt-devel wrote:
> > H... I don't see and rc-4 available for download
>
> Better do some
Hi Bill,
obviously wsjt-x is transmitting some data in some situations using UDP.
Cqrlog is receiving these data and fills it fields with it.
So callsign is transmitted, RST report seems also to be transmitted via
UDP but Grid/Locator is not in this line.
But when using the button "Log QSO" in
On 01/08/2021 20:46, Jim Brown via wsjt-devel wrote:
On 8/1/2021 9:34 AM, Bill Somerville via wsjt-devel wrote:
A grid square does not meet that criteria. OTOH the grid square is
not required by that definition of a QSO.
Horsepucky. A name is a piece of information. So is a State. And a
grid
On 01/08/2021 19:22, Co Co via wsjt-devel wrote:
Hi,
just wondering why I had to add the grid to any of my logged QSO by
typing manually I started to ask the cqrlog-group on Telegram.
But there everything seems to be okay, when clicking "log qso" the
Grid is transferred and logged, when
On 8/1/2021 9:34 AM, Bill Somerville via wsjt-devel wrote:
A grid square does not meet that criteria. OTOH the grid square is not
required by that definition of a QSO.
Horsepucky. A name is a piece of information. So is a State. And a grid
square a IS a piece of information, accepted as such
I can confirm Joe's writing, just downloaded it a few hours ago and IT Is
THERE!
73 de Cornel DO5CR
Joe Taylor via wsjt-devel schrieb am
So., 1. Aug. 2021, 20:49:
> On 8/1/2021 2:32 PM, Rory Bowers K5CKS via wsjt-devel wrote:
> > H... I don't see and rc-4 available for download
>
> Better
On 8/1/2021 2:32 PM, Rory Bowers K5CKS via wsjt-devel wrote:
H... I don't see and rc-4 available for download
Better do some self diagnosis, then -- it's there, and around 150 people
are using it on the air, already.
Maybe do a "Reload this page" on your browser?
Scroll down to where
H... I don't see and rc-4 available for download
On Sun, Aug 1, 2021 at 11:16 AM Adrian via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Did you configure the rig selection on update ? I found on update, that
> all of my settings are retained apart from the radio selection.
>
>
>
Hi,
just wondering why I had to add the grid to any of my logged QSO by typing
manually I started to ask the cqrlog-group on Telegram.
But there everything seems to be okay, when clicking "log qso" the Grid is
transferred and logged, when waiting for wsjt-x-transmitting is active in
the prefs.
Thanks for that info, Bill. So, if I work a R1 station in CM, the contact is
not valid for him? That’s very unfortunate.
Still, could the option be applied for R2 and R3? Seems like we could build it
into a configuration somehow?
George J Molnar
College Park, Maryland
KF2T | FM19ma
> On Aug
Europeans will not be keen either, we use signal reports and not grids in
contests and in fact generally. I will howl a lot! The VHF features is
important for EME.
73
Conrad PA5Y
From: George J Molnar via wsjt-devel
Sent: 01 August 2021 17:44
To: WSJT software development
Cc: George J
I see the problem...will be fixed in the next release.
In the meanwhile you should be able to use Fake It.
Mike W9MDB
On Sunday, August 1, 2021, 10:57:43 AM CDT, Jon Anhold via wsjt-devel
wrote:
I have reverted to 2.50-rc3. With rc4, every time I tried to key my 7610,
without the
On 01/08/2021 16:44, George J Molnar via wsjt-devel wrote:
Submitted for discussion…
Would it make sense to make the default sequence for VHF+ operation
the “Contest Mode” style with no signal reports, no “CQ TEST” and no
contest log being generated? Good old-fashioned Grids-Only mode. We
Did you configure the rig selection on update ? I found on update, that
all of my settings are retained apart from the radio selection.
vk4tux.
On 2/8/21 1:53 am, Jon Anhold via wsjt-devel wrote:
I have reverted to 2.50-rc3. With rc4, every time I tried to key my
7610, without the radio
I have reverted to 2.50-rc3. With rc4, every time I tried to key my 7610,
without the radio even keying, WSJT-X would pop up the "I've lost
communication with the radio" window.
73 de KM8V
On Sun, Aug 1, 2021 at 9:02 AM Joe Taylor via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Dear
Submitted for discussion…
Would it make sense to make the default sequence for VHF+ operation the
“Contest Mode” style with no signal reports, no “CQ TEST” and no contest log
being generated? Good old-fashioned Grids-Only mode. We don’t need signal
reports on weak signal or Es VHF work, where
Dear WSJT-X and MAP65 Users,
We are pleased to announce that a public Release Candidate WSJT-X
2.5.0-rc4 is now ready for download by beta testers. On Windows the
installation package also includes MAP65 3.0.0-rc4. See the Release
Notes for changes since WSJT-X 2.5.0-rc3:
38 matches
Mail list logo
