Ernst J. Oud a écrit :
> L.S.
>
> FYI
>
> I just successfully (although with lots of warnings) the vendor driver
> 3.0.0.56 using Hin-Tak's patch set. (Version 2.22.0.0 also compiled fine but
> crashed my box.)
>
> *Without* the ZDCONF_R8610_FRAG_FIX parameter set in the Makefile, it runs
> fine
ver I can't estimate; if
required I can test further. In that case any clues how to investigate this
further?
Regards,
Ernst
- Original Message -
From: "Hin-Tak Leung"
To: "Ernst J. Oud" ; "Benoit PAPILLAULT"
Cc:
Sent: Friday, March 05, 2010 3:01 PM
--- On Fri, 5/3/10, Benoit PAPILLAULT wrote:
> Regarding the source code you mentioned, I cannot find the
> R8610 thing.
> Which version/revision do you look at? Moreover, the
> RX_COPY_BREAK is 0
> in the source code I've looked at and this code is only
> used for RX (not
> TX), so it's unlik
--- On Thu, 4/3/10, Ernst J. Oud wrote:
> L.S.
>
> Mmm I might be onto something about this weird MTU
> problem with Zydas
> 1211b based devices on my embedded box.
>
> This box has an RDC i486 SOC processor.
>
> Within the vendor driver of the Zydas 1211b there is an
> extra compiler fla
Ernst J. Oud a écrit :
> L.S.
>
> Mmm I might be onto something about this weird MTU problem with Zydas
> 1211b based devices on my embedded box.
>
> This box has an RDC i486 SOC processor.
>
> Within the vendor driver of the Zydas 1211b there is an extra compiler flag
> called "ZDCONF_R8610_
in-Tak Leung"
To: ; "Ernst J. Oud"
Sent: Sunday, February 14, 2010 11:41 PM
Subject: Re: [zd1211-devs] Problem with MTU > 500
Hmm, what's the hardware (the zd1211rw: ... line in your dmesg, you can
probably just grep zd1211 /var/log/message for it as well) may be all the
same.
o: ; "Ernst J. Oud"
Sent: Sunday, February 14, 2010 11:41 PM
Subject: Re: [zd1211-devs] Problem with MTU > 500
Hmm, what's the hardware (the zd1211rw: ... line in your dmesg, you can
probably just grep zd1211 /var/log/message for it as well) may be all the
same. There are qu
also has toe
0ace:1215 vid/pid.
Ernst
- Original Message -
From: "Hin-Tak Leung"
To: ; "Ernst J. Oud"
Sent: Sunday, February 14, 2010 11:41 PM
Subject: Re: [zd1211-devs] Problem with MTU > 500
Hmm, what's the hardware (the zd1211rw: ... line in your d
Hmm, what's the hardware (the zd1211rw: ... line in your dmesg, you can
probably just grep zd1211 /var/log/message for it as well) may be all the same.
There are quite a few variants.
I don't know if putting compat-wireless on will help, but you could give that a
try. FWIW, the driver developme
"
To: ; "Ernst J. Oud"
Sent: Saturday, February 13, 2010 11:51 PM
Subject: Re: [zd1211-devs] Problem with MTU > 500
Hmm, unfortunately yes - you can build both in to have it runtime
switch-able, but you have to have both in before that can happen.(mintrel is
the default).
Hmm, unfortunately yes - you can build both in to have it runtime switch-able,
but you have to have both in before that can happen.(mintrel is the default).
--- On Sat, 13/2/10, Ernst J. Oud wrote:
> Yes, it is a module and yes I did a
> reboot. I can remember having specified
> minstrel when
February 13, 2010 11:38 PM
Subject: Re: [zd1211-devs] Problem with MTU > 500
the modprobe line only take effect after unload/reloading the mac80211
module (i.e. reboot or do modprobe -r then modprobe mac80211), also you need
to have built mac80211 as a module for this to work. lsmod shoul
uthenticate with AP --:--:--:--:--:-- (try 1)
> wlan0: authenticated
> wlan0: associate with AP --:--:--:--:--:-- (try 1)
> wlan0: RX AssocResp from --:--:--:--:--:-- (capab=0x411
> status=0 aid=4)
> wlan0: associated
>
> Any clues?
>
> TIA
>
> Ernst
>
&g
Also tried /etc/modprobe.d/options.conf with the setting as stated below;
still minstrel is used... weird.
- Original Message -
From: "Ernst J. Oud"
To: "Hin-Tak Leung" ;
Sent: Saturday, February 13, 2010 11:21 PM
Subject: Re: [zd1211-devs] Problem with MTU &
Any clues?
TIA
Ernst
- Original Message -
From: "Hin-Tak Leung"
To: ; "Ernst J. Oud"
Sent: Saturday, February 13, 2010 9:47 PM
Subject: Re: [zd1211-devs] Problem with MTU > 500
Hmm, the default(?) is 1500 - MTU=500 is way too low for normal usage.
since zd121
Hmm, the default(?) is 1500 - MTU=500 is way too low for normal usage.
since zd1211rw is also a mac80211 driver, can you give the pid modprobe.conf a
try to see if it helps? See http://bugzilla.kernel.org/show_bug.cgi?id=14168
--- On Sat, 13/2/10, Ernst J. Oud wrote:
> L.S.
>
> I am runnin
16 matches
Mail list logo
