I assume that you are talking about 6.5.5 and 6.5.6 of "SIP Trunking with sipXecs: Overview and Configuration"? Yes, that's how I set up the Gateway in the first place.
I have a SIP Trunk Gateway set up with sipXbridge-1 as the route and the ITSP account. Inbound and outbound calls are working perfectly. I'm not sure what that has to do with Hold/Resume, though, and I haven't seen anything in the Wiki that would make me think that the Hold/Resume problem has anything to do with the ITSP account? Mike Burden Lynk Systems, Inc e-mail: [email protected] Phone: 616-532-4985 -----Original Message----- From: M. Ranganathan [mailto:[email protected]] Sent: Friday, November 06, 2009 10:35 PM To: Burden, Mike Cc: [email protected] Subject: Re: [sipx-users] Hold/Resume with Polycom IP550 (was: RE: sipXbridge returning 404) On Fri, Nov 6, 2009 at 5:53 PM, Burden, Mike <[email protected]> wrote: > OK, I've got the SIP trunk to my ITSP working (it was a configuration > problem at the ITSP's end) > > > > Now I have a new problem. We are using Polycom IP550 phones. If we put a > call on hold from the IP550, the first softbutton label changes to "Resume", > but hitting the button does not retrieve the call. > > > > Does anyone know how to make this work correctly? > > > You need an ITSP record for sipxbridge to work. The domain part of the INVITE request that is sent to sipxbridge is used to pick the ITSP account. There are step by step instructions on the sipxrbidge wiki page. Did you take a look at those? Regards Ranga. > > > Mike Burden > > Lynk Systems, Inc > > e-mail: [email protected] > > Phone: 616-532-4985 > > > > > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Burden, Mike > Sent: Friday, November 06, 2009 9:01 AM > To: [email protected] > Subject: [sipx-users] sipXbridge returning 404 (was: RE: Multiple gateways?) > > > > OK, I'm down to one issue... I have one Gateway that is not working > correctly. It doesn't work correctly regardless of whether any other > gateways are configured. > > > > The sipXbridge is returning "SIP/2.0 404 No record of ITSP. Check > configuration", so we're not even getting far enough for the format that the > ITSP expects the phone number to be to come into play. > > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
