Hi,
I have a series of three articles on RFI, located at:
http://nk7z.net/category/info/mitigation-of-rf-interference/i-have-rfi-series/
the second article down, titled "I have RFI, now what: House Cleaning"
has the some of the correct part numbers for the Fair-Rite corporation
snap on ferrites.
Hello group mind,
I have a P3 control question for you all...
It appears to me, that the P3 does not accept macros for itself, via the
trigger launch process which fires off macros to the K3.
Is this assumption on my part correct?
If so, is there a way to trigger the P3 to accept a macro
t; Fred KE7X
>
> For all KE7X Elecraft books, see www.ke7x.com
>
>
>
>
> From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of David Cole
> <d...@nk7z.net>
> Sent: Sunday, January 24, 2016 10:14 AM
> To: e
> 73 Bill AE6JV
>
> On 1/24/16 at 9:14 AM, d...@nk7z.net (David Cole) wrote:
>
> > ... is there a way to trigger the P3 to accept a macro designed for
> > the P3 itself, using the rear USB connector on the P3?
> >
> > In essence, I want to be able to
Hello Elecraft,
Would it be possible for Elecraft to add the following feature to the
P3:
Allow P3 macros to be stored and triggered via the USB keyboard port on
the rear of the P3, as is currently being implemented now for the K3
macros.
In essence, I want the P3 to let me fire a P3 macro
One hint about your Linux Switch, if you use Google Chrome, make sure
you install the 64 bit version of Linux, not the 32 bit version. Google
just announced it is dropping 32 bit chrome.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
bet this will work with the KX3/PX3 too. I'd like to
> refer to it in the next editions of the K3S and KX3 books if that's OK with
> you.
> 73,
> Fred KE7X
>
>
>
> From: Elecraft <elecraft-boun...@mailman.qth.net> on behal
N1EU
>
> On Fri, Jan 22, 2016 at 10:17 AM, David Cole <d...@nk7z.net> wrote:
>
> > Hi Fred,
> >
> > I have no reason to believe it won't work with the KX3, or K3S either, I
> > just don't have one of the new K3S rigs, so I can't test it... Hence
> > wh
Hi,
It's not that difficult, most of the work is just programming the P3
macros into the P3 as Elecraft instructs you to do. Which was harder to
do than prepping the Genovation, as I used an external keyboard on the
P3.
Once the Keypad is updated, I just enter the triggers one time, hit the
Hello,
I now have a Genovation CP48USBHID keypad working on my P3/K3 feeding up
to 48 different macros to the K3 at a single button press.
See:
http://nk7z.net/adding-an-external-keypad-to-the-k3/
for the how to, and a download for the patch to the Genovation to allow
it to plug into the P3 and
Hi,
Does anyone actually have one of these working with a K3?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
But it was cool anyway!!! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
I wonder what EXACTLY was the issue?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
Hi,
I would like to ask a few questions to someone that has the Genovation
pad working on the K3 please...
If you would shoot me a note off list to "dave @ nk7z.net", with a phone
number in it, I would like to call for a short discussion about the
method of getting it to actually trigger the
Hi Jim,
I have that, and thank you for the info! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For
>
> I would recommend downloading software and documentation for both sets
> of hardware and fully understanding the operation before committing to
> either set of hardware - particularly given the cost.
>
> 73,
>
>... Joe, W4TV
>
>
> On 12/25/2015 2:36 PM, Da
Hi Joe,
As always you seem to have penetrated to the heart of my question...
THANK YOU!
As I have neither seen nor owned one of these keypads yet, I assume one
must program each key to emulate a key on a keyboard, separately
first.
So to check my understanding here is a brief overview:
I
and I thank you again sir!!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
Wow... Anyone having tested this with an external keypad have a
suggestion for a device, or will just any external keypad work as long
as it is USB?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
___
> From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of David Cole
> <d...@nk7z.net>
> Sent: Thursday, December 24, 2015 8:06 AM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3: External Macro Launcher (Revisited)
>
&g
Please keep this discussion on the reflector... I am also looking for
an external keypad for launching macros, that works with a P3, and a
computer in place as well...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
Speaking of using a GPSDO, I have a quick question...
I use a program called SBSpectrum, it shows frequency changes less than
one Hz.
I note that the K3, does frequency correction in small sawtooth steps of
about 1/4 to 1 Hz, across a few seconds of time, repeatedly... It is as
if some
Yup, I use an SO-239 metal connector cap on mine, looks great.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Off to make another config file...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
://groups.yahoo.com/neo/groups/MM-SSTV/info
On Wed, 2015-12-09 at 22:20 -0800, David Cole wrote:
> The BED-90 works fairly well on 75 Meters, about 2 S units down from a
> dipole, but it has a 1:1 on almost any frequency between 3 MHz., and 30
> Mhz., which is fine for me as I am using a KW for
The BED-90 works fairly well on 75 Meters, about 2 S units down from a
dipole, but it has a 1:1 on almost any frequency between 3 MHz., and 30
Mhz., which is fine for me as I am using a KW for MARS work, and we are
on clear frequencies...
I have heard several stories about what it has for a
Hi,
I also see big differences between the new and old synths... I did some
very informal graphs of performance using the P3, and a neighbor, very
large reduction in noise for me when he transmits now... They show a
marked difference in the noise.
See:
Isn't that the same Peter M that wrote the Dopplergram program? If so,
he is one smart cookie... He is in my Dopplergram group on Yahoo, and
the depth of knowledge he demonstrates almost daily is amazing...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
orm of AMTOR and PSK31.
>
> 73 Stephen
>
> On 28 November 2015 at 14:13, David Cole <d...@nk7z.net> wrote:
>
> > Isn't that the same Peter M that wrote the Dopplergram program? If so,
> > he is one smart cookie... He is in my Dopplergram group on Yahoo, and
> &
Hi,
Please forgive a slightly off topic post here...
I have just added US Spot counts by hour, for all bands as an aid to
knowing when the band is open, to my web page.
See:
http://nk7z.net/prorogation/cluster-spot-counts/
--
Thanks and 73's,
For equipment, and software setups and reviews
Hi,
I have a few macros here...
http://nk7z.net/wiki/elecraft-k3-macros/
Some I have gotten off the mail lists, and some I have built... This is
my Wiki for the K3. I just began adding to it a few months ago...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
Could someone recommend a good crimper please? This has been a most
interesting discussion.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
See this URL to hear your signal
http://km3t.org/v47t-cqwwssb2015/wtQsoPlayer.php
Just enter your call sign in the input window...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For
I also run with no AGC... It makes a major difference in how the data
is copied...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Jim,
I would take you up on that if possible as well!! Pick a time...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
No he isn't...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
That is exactly how I got V73D as well... Watching him on the P3 work
people, and pre-positioning myself in front of him...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram
Then just wait for some poor person to transmit on top of the DX, in
error, and look for all the band cops sending UP UP UP, and you can find
the DX frequency as well. :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
Hi,
Just this morning, I used my P3 to look at the signals answering TX3X,
looking for an expanded view, showing 3 KHz wide, and centered on the UP
frequency. This allows me to fit into the holes where no one is calling
during a pileup... It takes very little time to set this up on the P3.
I
page.
>
>
>
> Hope you find this article useful.
>
> --
>
>
>
>
>
>
>
> Rick, WA6NHC
>
>
> iPad = small keypad = typos = sorry ;-)
>
> On Oct 4, 2015, at 8:39 AM, David Cole <d...@nk7z.net> wrote:
>
>
> > Hello,
>
Hello,
I am trying to solve a slight digital problem, using my K3. I suspect
that Windows 7 has an AGC of some type on it controlling the Line Input
levels.
Can someone verify if this is true, and if so, is there a way to disable
the AGC on input?
--
Thanks and 73's,
For equipment, and
Hi Paul,
Thank you for the suggestion, but respectfully, I am not sure I want to
take such a brut force fix for this, as I have many prams set, that are
not at default. Does this reset everything in the radio to factory?
I want to understand what is happening before I make changes...
--
I got a few of the ERR KEY messages as well, I am unable to reproduce
them as well...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Wayne,
THANK YOU! That mindset youhave is why I bought Elecraft!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Perhaps I missed the answer to this...
My SVGA external monitor shows signals about 1/2 to one S unit lower
than my P3 does on the native screen... What am I missing?
If I use Peak Hold, there is a clear 1/2 to one S-Unit difference in teh
display height...
--
Thanks and 73's,
For equipment,
Nothing, but THANK YOU... Can you remail me please...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For
Hello,
I noticed today, that the SVGA display shows one S unit lower than the
normal P3 display...
An example is as follows:
1. I set the P3 to 200 KHz wide.
2. SVGA shows plus/minus 100 KHz, as the P3 does.
3. I turn on peak hold.
4. I have a peak of S9 on the P3, but on the SVGA the peak
> > well for both CW and RTTY and of course the DSP does all the rest. I also
> > ordered a 2.1 khz filter so if I go past 400 hz I get that one. It works
> > well for me but this is just my opinion.
> >
> > Ken W0CZw0cz at i29 dot net
> >
> > Sent
Interesting question just popped into my head as I read this...
Does the P3 follow which RX is selected?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Hi,
I use the 400 Hz filter for CW, and would enjoy a 1 KHz filter I
believe... The 400 is just a touch to narrow for my tastes. It works
well in crowded conditions, and I would not want to get rid of it, but a
1 KHz might get more use...
--
Thanks and 73's,
For equipment, and software setups
Wayne,
Does this mane you will be developing the phase canceling RFI remover
what was discussed here a few months ago? Kidding of course...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For
Yes, I agree as well... Please stick to things radio...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
-Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David
> Cole
> Sent: Monday, September 14, 2015 3:55 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 / K3S Station setup question
>
> What about the new Speak
What about the new Speaker? :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
I must second Phil's thoughts here... I also did the A/B, and now have
only a K3...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
I have to echo these thoughts... When I purchased my K3, (not S), I A/B
compared both to each other... I was perfectly ready to sell the K3 if
it did not perform a lot better... My goal was the best rig possible on
my budget...
I was going to take a month to do the A/B, as I expected them to
Not sure what other tuners you are using, but my LDG AT1000- PROII, and
every other LDG tuner I have owned, takes about 3 seconds to tune a
pretuned frequency.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
and clear heat shrink...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
That is Elecraft's way of reminding you that you have not selected an
option yet... :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Guy is correct, I have a ham living about 700 feet from me, and when he
opens up with his KW, my old Icom used to die... The K3 does not even
let me know he is on if he is beyond 10 to 20 KHz. Only way I can tell
is a HUGE spike in the P3 at his operating frequency.
I did a very informal set of
I tend to agree with Steve here... My insurance agent said almost the
same thing... Don't call in your home owners unless you really need
too...
Also, given that I believe the ARRL insurance seems to cover stupidity,
(you spill water in your rig it pays off), the fee is not all that
bad.
I
I guess I am not quite as cynical as you.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
I still have both my HP-45, and 55 both still working! Use them
exclusively, and both are RPN only!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Clearly this thread has run its course, and new ideas are invading! :)
Perhaps it is time for the thread to die...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information
Done, and thanks!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
Thanks Matt, I will look at it!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
Jerry,
I don't regret selling my 756 PRO III, and replacing it with the K3 one
bit!
The K3 is a much more versatile rig. Not as pretty as the old Pro III,
(not as large either, which is a plus), but I don't really care about
pretty, I care about performance, and I have an entire new layer of
Same here Mike, best rig I have ever owned, and well worth the cost.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
My guess would be that a different program author wrote it... :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Chris,
I can get it to work some... Use the little squares on the left to do
the cut, then use the actual data entry field to do the paste...
Not sure what Elecraft did for cut and paste, but it does not work as I
would expect it to work either.
--
Thanks and 73's,
For equipment, and software
Hi Bob,
When I got my K3 I decided to totally rebuild much as you did... Desk
is movable, and uses hangers for the cabling...
See:
http://nk7z.net/rebuilding-the-shack/
for photos of the back of the desk, not just the front...
--
Thanks and 73's,
For equipment, and software setups and
called the
delete key instead of trying to be a list cop. No offense
intended, just saying...
W4CWZ
On 7/16/2015 11:58 PM, David Cole wrote:
guy,
Your assumption that I was complaining is in error. I was pointing out
that the stated, only viable option was in fact not the only
work. Whether he will agree with
you and/or do something is a separate matter.
Convince him and he might change something. Otherwise, it's his front
yard, not ours. We are but invited guests.
73, Guy K2AV.
On Thu, Jul 16, 2015 at 10:48 PM, David Cole d...@nk7z.net wrote
No that is not the only viable answer to this... I moderate three lists
on Yahoo, MixW, MMSSTV, and Dopplergrams... All are open posting, and
none of them go as far astray as this list does...
The moderator needs to crack the whip is all..
--
Thanks and 73's,
For equipment, and software
Hi,
I have added a bit more information to the pages which show the new vs.
old synthesizer differences. Just some clarification comments is all.
Page is at:
http://nk7z.net/wiki/elecraft-k3-macros/elecraft-k3-xlr-to-radio/elecraft-k3-new-synthesizer/
--
Thanks and 73's,
For equipment, and
Bill,
For your usage, I would not even worry about replacing the K3 with a
K3S. Just upgrade the synthesizer, and that is about all you will need
for Rag Chewing, etc... Now, if you decide to start hunting DX, etc,
then you might start to worry...
I have a comparison between the old and new
Al,
Let me pose a set of conditions, and see if I understand this...
Is the smearing caused mostly by the phase noise sidebands, as a
resultant of phase flicker?
i.e. If the phase noise were reduced on a transmitting VFO, then the
smearing would also be reduced, because the sidebands would no
at 9:02 AM, David Cole d...@nk7z.net wrote:
Al,
Let me pose a set of conditions, and see if I understand
this...
Is the smearing caused mostly by the phase noise sidebands, as
a
resultant of phase flicker
My most active neighbor, (I have 5 hams in less than 1/2 mile from me),
runs an Icom 706MKII G, that is a real POS if I have ever seen one...
It takes out most of the band when he is on, and running 100W, as
opposed to the K7OLN's K3, (750 feet form me), when running a KW and I
am able to
Hello,
I had what I believe to be a unique opportunity to test the new
synthesizer in a high signal level environment, under some controlled
conditions.
K7OLN lives about 750 feet from me, and we both have static antenna
setups, and because he is running WSPR K7OLN also has static power
levels
that
the improvement surprised everyone at Elecraft - the results were much
better than expected. So all K3 owners can benefit from that part of the
K3S development.
73,
Don W3FPR
On 7/7/2015 6:32 PM, David Cole wrote:
Not scientific, but close... As can be seen the new
Robin,
A quick question... If for instance, the ARRL were to change input
format for LoTW in such a way as to break HRD, and after a year of
ownership, would the corrective update be free, or would the HRD user
have to pay for an update to get the correction?
--
Thanks and 73's,
For
:
Well, I'm not a Lawyer, but I did sleep at a Comfort Inn once
If something happens to break HRD, which is/was out of HRD's
control, then I expect you would pay for the fix.
They can't be held responsible for the actions of others.
73, Dick, W1KSZ
On 6/13/2015 6:13 AM, David Cole
.
73, Dick, W1KSZ
On 6/13/2015 6:13 AM, David Cole wrote:
Robin,
A quick question... If for instance, the ARRL were to change input
format for LoTW in such a way as to break HRD, and after a year of
ownership, would the corrective update be free, or would the HRD user
have
/software would be economic suicide.
73,
... Joe, W4TV
On 2015-06-13 10:30 AM, David Cole wrote:
Hi Dick,
Just checking to see if the HRD software package can be rendered broken
by outside parties without a free update, after a year of ownership has
passed.
HRD itself
Hi,
If you have a copy of Windows, try Virtual Box.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For
Hi,
I may be able to spend a pair of hours at Sea-Pac on Saturday...
Dave Cole
NK7Z
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
Mike,
I use MixW, and like it. I have a review of it here:
http://nk7z.net/review-of-mixw-multimode-software/
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
No kidding, I was thinking of suggesting this as well...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
Same here, using the rear connector, and all is well...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for
Are you saying you run JT65 at 500 Watts?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
That would be the best option, I hope that is the way it works!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Yeah right... Never going to happen... Hams are without a doubt the
cheapest people I have ever met.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi,
I got the external monitor running on the P3, was easy... Cost all of
100 bucks for the monitor, and as far as I can tell it works great, a 7
inch device.
See:
http://www.ebay.com/itm/201226395031?_trksid=p2057872.m2749.l2649ssPageName=STRK%3AMEBIDX%3AIT
It is claiming to be 1920 by 1080!
Hi Elecraft,
Thanks! They are in and worked first time! Nice instructions! Glad
you did away with the washer between the old synth board, and the
mount! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Wayne,
That is one of the reasons I purchased a K3, that exact commitment,
thank you!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hello Bob,
I had the same feelings when I bought the K3. This rig was clearly
designed by a CW person... This is by far the best rig I have ever
owned...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
=
Astronomical Objective: 12.5 inch diameter mirror
F/6, full thickness, (2.13 inches)
Fully aluminized, and fully parabolized
Pyrex, research grade mirror for sale or trade.
This mirror was tested at better than 1/8
LSMFT had several other meanings... :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
I am having the same issue with the PWR, Width, and Shift encoders as
well...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
1 - 100 of 378 matches
Mail list logo