Yes, this will work fine. Just make sure to turn EQ and compression off and set the output of the SignaLink and the K3's Line In level such that you see 4-5 bars on the K3's ALC meter. Do not do what you probably did with other rigs and try to keep the ALC meter from indicating anything at all - that will not work with the K3.
However, there is a better alternative to using USB mode, and that is DATA A. DATA A defaults to using Line In instead of Mic, and switches the front-panel Mic gain control to a Line In level control - that way your settings for data modes stay independent of your mic gain settings for SSB - and DATA A also disables TX and RX EQ and compression, so you don't have to remember to change settings between SSB and digital. 73, Rich VE3KI Bill W2BLC wrote: > Let me get this straight: a SignaLink USB box plugged into the K3, > software is DigiPan, mode is USB, and power reduced to 25 Watts. > Acceptable? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
